Features

■ Formerly a product ■ 65 to 895 Vdc DC operating voltage range

CV 50
K20
■ Five model sizes available - 5, 7, 10, 14 ■ Available in tape and reel packaging for
and 20 mm automatic pick-and-place
■ Broad range of current and energy ■ RoHS compliant*
handling capabilities
■ 50 to 680 Vrms AC voltage range; higher
voltages available upon request (see the
ZV Series for voltages below 50 V)

CV Series - Medium Voltage Disc Varistors

General Information Additional Information

The CV series of transient surge suppressors are disc shaped varistors designed to be Click these links for more information:
operated continuously in low and medium voltage electronic system circuits as well as
across AC power lines.
Due to their radial lead construction, these components require very little mounting
PRODUCT TECHNICAL INVENTORY SAMPLES CONTACT
space. They are available in five model sizes: 5 mm, 7 mm, 10 mm, 14 mm and 20 mm SELECTOR LIBRARY
and feature a wide AC operating voltage ranging from 50 V to 680 V.

Absolute Maximum Ratings Agency Recognition

Parameter Value Units Standard UL 1449

Continuous: File Number E313168**
Steady State Applied Voltage
DC Voltage Range (Vdc) 65 to 895 V
Varistor Symbol
AC Voltage Range (Vrms) 50 to 680 V
Transient:
Peak Single Pulse Surge Current, 8/20 μs Waveform (Imax) 400 to 6500 A
Single Pulse Surge Energy, 10/1000 μs Waveform (Wmax) 2.7 to 620 J
Operating Ambient Temperature -40 to +85 °C U
Storage Temperature Range -40 to +125 °C
Threshold Voltage Temperature Coefficient < +0.05 %/°C Index
Insulation Resistance >1 GΩ Features ...................................................... 1
Isolation Voltage Capability > 2.5 kV General Information .................................... 1
Response Time < 25 ns Agency Recognition .................................... 1
Climatic Category 40 / 85 / 56
Varistor Symbol ........................................... 1
Absolute Maximum Ratings ........................ 1
Device Ratings .........................................2-3
Product Dimensions ................................. 4-6
How to Order ............................................... 7
Typical Part Marking ................................... 7
Pulse Rating Curves ................................ 7-9
Packaging Drawings ................................. 10
Packaging Specifications .................... 11-12
Assembly / Soldering
Recommendations for Through-Hole
Asia-Pacific: Tel: +886-2 2562-4117 • Email: [email protected] Components .............................................. 13
EMEA: Tel: +36 88 885 877 • Email: [email protected] Reliability Testing Procedures .............. 14-15
The Americas: Tel: +1-951 781-5500 • Email: [email protected] Terminology ............................................... 16
www.bourns.com Legal Disclaimer........................................ 17

WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

*RoHS Directive 2015/863, Mar 31, 2015 and Annex.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 CV Series - Medium Voltage Disc Varistors

Device Ratings

Vn Wmax P Imax C Typ.

Vrms Vdc Vc Ic
Model @ 1 mA 10/1000 μs max. 8/20 μs @ 1 kHz
V V V V A J W A pF
CV 50 K 5 50 65 82 135 5 2.7 0.1 400 350
CV 50 K 7 50 65 82 135 10 6.8 0.25 1200 820
CV 50 K 10 50 65 82 135 25 17 0.4 2500 1400
CV 50 K 14 50 65 82 135 50 35 0.6 4500 2600
CV 50 K 20 50 65 82 135 100 75 1 6500 5000
CV 60 K 5 60 85 100 165 5 3 0.1 400 300
CV 60 K 7 60 85 100 165 10 7 0.25 1200 680
CV 60 K 10 60 85 100 165 25 16 0.4 2500 1200
CV 60 K 14 60 85 100 165 50 34 0.6 4500 2200
CV 60 K 20 60 85 100 165 100 71 1 6500 4100
CV 75 K 5 75 100 120 200 5 4 0.1 400 250
CV 75 K 7 75 100 120 200 10 9 0.25 1200 550
CV 75 K 10 75 100 120 200 25 21 0.4 2500 950
CV 75 K 14 75 100 120 200 50 41 0.6 4500 1800
CV 75 K 20 75 100 120 200 100 81 1 6500 3300
CV 95 K 5 95 125 150 250 5 6 0.1 400 200
CV 95 K 7 95 125 150 250 10 11 0.25 1200 440
CV 95 K 10 95 125 150 250 25 25 0.4 2500 750
CV 95 K 14 95 125 150 250 50 51 0.6 4500 1400
CV 95 K 20 95 125 150 250 100 106 1 6500 2600
CV 115 K 5 115 150 180 300 5 6 0.1 400 170
CV 115 K 7 115 150 180 300 10 13 0.25 1200 360
CV 115 K 10 115 150 180 300 25 30 0.4 2500 650
CV 115 K 14 115 150 180 300 50 62 0.6 4500 1200
CV 115 K 20 115 150 180 300 100 118 1 6500 2100
CV 130 K 5 130 170 205 340 5 7 0.1 400 150
CV 130 K 7 130 170 205 340 10 15 0.25 1200 320
CV 130 K 10 130 170 205 340 25 34 0.4 2500 580
CV 130 K 14 130 170 205 340 50 68 0.6 4500 1050
CV 130 K 20 130 170 205 340 100 142 1 6500 1900
CV 140 K 5 140 180 220 360 5 7 0.1 400 140
CV 140 K 7 140 180 220 360 10 18 0.25 1200 1200
CV 140 K 10 140 180 220 360 25 37 0.4 2500 2500
CV 140 K 14 140 180 220 360 50 75 0.6 4500 4500
CV 140 K 20 140 180 220 360 100 157 1 6500 6500
CV 150 K 5 150 200 240 395 5 9 0.1 400 130
CV 150 K 7 150 200 240 395 10 18 0.25 1200 280
CV 150 K 10 150 200 240 395 25 41 0.4 2500 510
CV 150 K 14 150 200 240 395 50 81 0.6 4500 900
CV 150 K 20 150 200 240 395 100 170 1 6500 1550
CV 175 K 5 175 225 270 455 5 9.5 0.1 400 120
CV 175 K 7 175 225 270 455 10 21 0.25 1200 250
CV 175 K 10 175 225 270 455 25 46 0.4 2500 440
CV 175 K 14 175 225 270 455 50 95 0.6 4500 800
CV 175 K 20 175 225 270 455 100 193 1 6500 1400
Continued on Next Page
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 CV Series - Medium Voltage Disc Varistors

Device Ratings (Continued)

Vn Wmax P Imax C Typ.

Vrms Vdc Vc Ic
Model @ 1 mA 10/1000 μs max. 8/20 μs @ 1 kHz
V V V V A J W A pF
CV 230 K 5 230 300 360 595 5 13 0.1 400 90
CV 230 K 7 230 300 360 595 10 28 0.25 1200 190
CV 230 K 10 230 300 360 595 25 62 0.4 2500 350
CV 230 K 14 230 300 360 595 50 126 0.6 4500 650
CV 230 K 20 230 300 360 595 100 258 1 6500 1200
CV 250 K 5 250 320 390 650 5 14 0.1 400 80
CV 250 K 7 250 320 390 650 10 30 0.25 1200 180
CV 250 K 10 250 320 390 650 25 68 0.4 2500 320
CV 250 K 14 250 320 390 650 50 135 0.6 4500 580
CV 250 K 20 250 320 390 650 100 276 1 6500 1000
CV 275 K 5 275 350 430 710 5 16 0.1 400 70
CV 275 K 7 275 350 430 710 10 35 0.25 1200 160
CV 275 K 10 275 350 430 710 25 78 0.4 2500 300
CV 275 K 14 275 350 430 710 50 150 0.6 4500 530
CV 275 K 20 275 350 430 710 100 304 1 6500 900
CV 300 K 5 300 385 470 775 5 21 0.1 400 65
CV 300 K 7 300 385 470 775 10 37 0.25 1200 150
CV 300 K 10 300 385 470 775 25 82 0.4 2500 280
CV 300 K 14 300 385 470 775 50 169 0.6 4500 490
CV 300 K 20 300 385 470 775 100 350 1 6500 850
CV 320 K 10 320 420 510 840 25 91 0.4 2500 260
CV 320 K 14 320 420 510 840 50 184 0.6 4500 460
CV 320 K 20 320 420 510 840 100 388 1 6500 800
CV 385 K 10 385 505 620 1025 25 93 0.4 2500 240
CV 385 K 14 385 505 620 1025 50 193 0.6 4500 400
CV 385 K 20 385 505 620 1025 100 396 1 6500 700
CV 420 K 10 420 560 680 1120 25 97 0.4 2500 220
CV 420 K 14 420 560 680 1120 50 202 0.6 4500 350
CV 420 K 20 420 560 680 1120 100 418 1 6500 650
CV 460 K 10 460 615 750 1240 25 106 0.4 2500 200
CV 460 K 14 460 615 750 1240 50 220 0.6 4500 330
CV 460 K 20 460 615 750 1240 100 460 1 6500 550
CV 510 K 10 510 670 820 1355 25 115 0.4 2500 180
CV 510 K 14 510 670 820 1355 50 227 0.6 4500 310
CV 510 K 20 510 670 820 1355 100 478 1 6500 500
CV 550 K 10 550 745 910 1500 25 134 0.4 2500 170
CV 550 K 14 550 745 910 1500 50 264 0.6 4500 290
CV 550 K 20 550 745 910 1500 100 515 1 6500 450
CV 625 K 10 625 825 1000 1650 25 140 0.4 2500 160
CV 625 K 14 625 825 1000 1650 50 280 0.6 4500 270
CV 625 K 20 625 825 1000 1650 100 565 1 6500 400
CV 680 K 10 680 895 1100 1815 25 155 0.4 2500 150
CV 680 K 14 680 895 1100 1815 50 310 0.6 4500 250
CV 680 K 20 680 895 1100 1815 100 620 1 6500 350

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 CV Series - Medium Voltage Disc Varistors

Product Dimensions

Dimension D t
Model
D (Max.) t (Max.) R d h (Max.) a
7 3.5 5 0.6 9.5 1.0
CV 50 K 5 (.276) (.138) (.197) (.024) (.374) (.039)
9 3.5 5 0.6 11.5 1.0 h
CV 50 K 7 (.354) (.138) (.197) (.024) (.453) (.039)
12.5 4.1 7.5 0.8 15 1.3
CV 50 K 10 (.492) (.161) (.295) (.031) (.591) (.051)
16.5 4.1 7.5 0.8 20 1.4
CV 50 K 14 (.650) (.161) (.295) (.031) (.787) (.055)
22.5 4.5 10 1.0 26 1.6 3.0
CV 50 K 20 (.886) (.177) (.394) (.039) (1.024) (.063) (.118)
7 3.5 5 0.6 9.5 1.1 MAX.
CV 60 K 5 (.276) (.138) (.197) (.024) (.374) (.043) 25.0
9 3.5 5 0.6 11.5 1.1 (.984)
CV 60 K 7 (.354) (.138) (.197) (.024) (.453) (.043) MIN.
12.5 4.1 7.5 0.8 15 1.4
CV 60 K 10 (.492) (.161) (.295) (.031) (.591) (.055)
16.5 4.2 7.5 0.8 20 1.5
CV 60 K 14 (.650) (.165) (.295) (.031) (.787) (.059)
22.5 4.6 10 1.0 26 1.7
CV 60 K 20 (.886) (.186) (.394) (.039) (1.024) (.067)
7 3.6 5 0.6 9.5 1.2
CV 75 K 5 (.276) (.142) (.197) (.024) (.374) (.047) d
R
9 3.6 5 0.6 11.5 1.2
CV 75 K 7 a
(.354) (.142) (.197) (.024) (.453) (.047)
12.5 4.2 7.5 0.8 15 1.5
CV 75 K 10 (.492) (.165) (.295) (.031) (.591) (.059)
16.5 4.2 7.5 0.8 20 1.5
CV 75 K 14 (.650) (.165) (.295) (.031) (.787) (.059) D t
22.5 4.6 10 1.0 26 1.7
CV 75 K 20 (.886) (.186) (.394) (.039) (1.024) (.067)
7 3.8 5 0.6 9.5 1.4
CV 95 K 5 (.276) (.150) (.197) (.024) (.374) (.055)
9 3.8 5 0.6 11.5 1.4 h
CV 95 K 7 (.354) (.150) (.197) (.024) (.453) (.055)
12.5 4.3 7.5 0.8 15 1.7
CV 95 K 10 (.492) (.169) (.295) (.031) (.591) (.067)
16.5 4.3 7.5 0.8 20 1.7
CV 95 K 14 (.650) (.169) (.295) (.031) (.787) (.067)
22.5 4.6 10 1.0 26 1.9 3.0
CV 95 K 20 (.886) (.186) (.394) (.039) (1.024) (.075) (.118)
7 4.0 5 0.6 9.5 1.6 MAX.
CV 115 K 5 (.276) (.157) (.197) (.024) (.374) (.063) 25.0
9 4.0 5 0.6 11.5 1.6 (.984)
CV 115 K 7 (.354) (.157) (.197) (.024) (.453) (.063) MIN.
12.5 4.3 7.5 0.8 15 1.9
CV 115 K 10 (.492) (.169) (.295) (.031) (.591) (.075)
16.5 4.4 7.5 0.8 20 1.9
CV 115 K 14 (.650) (.173) (.295) (.031) (.787) (.075)
22.5 4.8 10 1.0 26 2.1 d
CV 115 K 20 R
(.886) (.189) (.394) (.039) (1.024) (.083)
7 4.0 5 0.6 9.5 1.8 a
CV 130 K 5 (.276) (.157) (.197) (.024) (.374) (.071)
9 4.0 5 0.6 11.5 1.8
CV 130 K 7 (.354) (.157) (.197) (.024) (.453) (.071)
12.5 4.5 7.5 0.8 15 2.0 MM
CV 130 K 10 DIMENSIONS:
(.492) (.177) (.295) (.031) (.591) (.079) (INCHES)
16.5 4.6 7.5 0.8 20 2.0
CV 130 K 14 (.650) (.186) (.295) (.031) (.787) (.079)
22.5 5.0 10 1.0 26 2.2
CV 130 K 20 (.886) (.197) (.394) (.039) (1.024) (.087)

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 CV Series - Medium Voltage Disc Varistors

Product Dimensions (Continued)

Dimension D t
Model
D (Max.) t (Max.) R d h (Max.) a
7 4.1 5 0.6 9.5 1.9
CV 140 K 5 (.276) (.161) (.197) (.024) (.374) (.075)
9 4.1 5 0.6 11.5 1.9 h
CV 140 K 7 (.354) (.161) (.197) (.024) (.453) (.075)
12.5 4.6 7.5 0.8 15 2.1
CV 140 K 10 (.492) (.186) (.295) (.031) (.591) (.083)
16.5 4.7 7.5 0.8 20 2.1
CV 140 K 14 (.650) (.185) (.295) (.031) (.787) (.083)
22.5 5.1 10 1.0 26 2.3 3.0
CV 140 K 20 (.886) (.201) (.394) (.039) (1.024) (.091) (.118)
7 4.3 5 0.6 9.5 2.0 MAX.
CV 150 K 5 (.276) (.169) (.197) (.024) (.374) (.079) 25.0
9 4.3 5 0.6 11.5 2.0 (.984)
CV 150 K 7 (.354) (.169) (.197) (.024) (.453) (.079) MIN.
12.5 4.6 7.5 0.8 15 2.2
CV 150 K 10 (.492) (.186) (.295) (.031) (.591) (.087)
16.5 4.8 7.5 0.8 20 2.2
CV 150 K 14 (.650) (.189) (.295) (.031) (.787) (.087)
22.5 5.2 10 1.0 26 2.4
CV 150 K 20 (.886) (.205) (.394) (.039) (1.024) (.094)
7 4.8 5 0.6 9.5 2.1
CV 175 K 5 (.276) (.189) (.197) (.024) (.374) (.083) d
R
9 4.8 5 0.6 11.5 2.1
CV 175 K 7 a
(.354) (.189) (.197) (.024) (.453) (.083)
12.5 4.9 7.5 0.8 15 2.3
CV 175 K 10 (.492) (.193) (.295) (.031) (.591) (.091)
16.5 4.9 7.5 0.8 20 2.3
CV 175 K 14 (.650) (.193) (.295) (.031) (.787) (.091) D t
22.5 5.3 10 1.0 26 2.5
CV 175 K 20 (.886) (.209) (.394) (.039) (1.024) (.098)
7 4.8 5 0.6 9.5 2.6
CV 230 K 5 (.276) (.189) (.197) (.024) (.374) (.102)
9 4.8 5 0.6 11.5 2.6 h
CV 230 K 7 (.354) (.189) (.197) (.024) (.453) (.102)
12.5 5.4 7.5 0.8 15 2.8
CV 230 K 10 (.492) (.213) (.295) (.031) (.591) (.110)
16.5 5.5 7.5 0.8 20 2.8
CV 230 K 14 (.650) (.217) (.295) (.031) (.787) (.110)
22.5 5.9 10 1.0 26 3.0 3.0
CV 230 K 20 (.886) (.232) (.394) (.039) (1.024) (.118) (.118)
7 5.0 5 0.6 9.5 2.8 MAX.
CV 250 K 5 (.276) (.197) (.197) (.024) (.374) (.110) 25.0
9 5.0 5 0.6 11.5 2.8 (.984)
CV 250 K 7 (.354) (.197) (.197) (.024) (.453) (.110) MIN.
12.5 5.6 7.5 0.8 15 3.0
CV 250 K 10 (.492) (.220) (.295) (.031) (.591) (.118)
16.5 5.7 7.5 0.8 20 3.0
CV 250 K 14 (.650) (.224) (.295) (.031) (.787) (.118)
22.5 6.1 10 1.0 26 3.2 d
CV 250 K 20 R
(.886) (.240) (.394) (.039) (1.024) (.126)
7 5.6 5 0.6 9.5 3.0 a
CV 275 K 5 (.276) (.220) (.197) (.024) (.374) (.118)
9 5.6 5 0.6 11.5 3.0
CV 275 K 7 (.354) (.220) (.197) (.024) (.453) (.118)
12.5 6.0 7.5 0.8 15 3.2 MM
CV 275 K 10 DIMENSIONS:
(.492) (.236) (.295) (.031) (.591) (.126) (INCHES)
16.5 6.0 7.5 0.8 20 3.2
CV 275 K 14 (.650) (.236) (.295) (.031) (.787) (.126)
22.5 6.3 10 1.0 26 3.4
CV 275 K 20 (.886) (.248) (.394) (.039) (1.024) (.134)

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 CV Series - Medium Voltage Disc Varistors

Product Dimensions (Continued)

Dimension D t
Model
D (Max.) t (Max.) R d h (Max.) a
7 5.8 5 0.6 9.5 3.2
CV 300 K 5 (.276) (.228) (.197) (.024) (.374) (.126)
9 5.8 5 0.6 11.5 3.2 h
CV 300 K 7 (.354) (.228) (.197) (.024) (.453) (.126)
12.5 6.1 7.5 0.8 15 3.4
CV 300 K 10 (.492) (.240) (.295) (.031) (.591) (.134)
16.5 6.1 7.5 0.8 20 3.4
CV 300 K 14 (.650) (.240) (.295) (.031) (.787) (.134)
22.5 6.6 10 1.0 26 3.6 3.0
CV 300 K 20 (.886) (.260) (.394) (.039) (1.024) (.141) (.118)
12.5 6.8 7.5 0.8 16 3.6 MAX.
CV 320 K 10 (.492) (.268) (.295) (.031) (.630) (.141) 25.0
16.5 6.8 7.5 0.8 21 3.6 (.984)
CV 320 K 14 (.650) (.268) (.295) (.031) (.827) (.141) MIN.
22.5 6.8 10 1.0 27 3.8
CV 320 K 20 (.886) (.268) (.394) (.039) (1.063) (.150)
12.5 7.4 7.5 0.8 16 4.2
CV 385 K 10 (.492) (.291) (.295) (.031) (.630) (.165)
16.5 7.4 7.5 0.8 21 4.2
CV 385 K 14 (.650) (.291) (.295) (.031) (.827) (.165)
22.5 7.5 10 1.0 27 4.4
CV 385 K 20 (.886) (.295) (.394) (.039) (1.063) (.173) d
R
12.5 7.3 7.5 0.8 16 4.4 a
CV 420 K 10 (.492) (.287) (.295) (.031) (.630) (.173)
16.5 7.4 7.5 0.8 21 4.4
CV 420 K 14 (.650) (.291) (.295) (.031) (.827) (.173)
22.5 7.8 10 1.0 27 4.6
CV 420 K 20 (.886) (.307) (.394) (.039) (1.063) (.181) D t
12.5 7.8 7.5 0.8 16 4.8
CV 460 K 10 (.492) (.307) (.295) (.031) (.630) (.189)
16.5 7.8 7.5 0.8 21 4.8
CV 460 K 14 (.650) (.307) (.295) (.031) (.827) (.189)
22.5 8.2 10 1.0 27 5.0 h
CV 460 K 20 (.886) (.323) (.394) (.039) (1.063) (.197)
12.5 8.2 7.5 0.8 16 5.1
CV 510 K 10 (.492) (.323) (.295) (.031) (.630) (.201)
16.5 8.2 7.5 0.8 21 5.1
CV 510 K 14 (.650) (.323) (.295) (.031) (.827) (.201)
22.5 8.7 10 1.0 27 5.3 3.0
CV 510 K 20 (.886) (.343) (.394) (.039) (1.063) (.209) (.118)
12.5 8.8 7.5 0.8 16 5.6 MAX.
CV 550 K 10 (.492) (.346) (.295) (.031) (.630) (.220) 25.0
16.5 8.8 7.5 0.8 21 5.6 (.984)
CV 550 K 14 (.650) (.346) (.295) (.031) (.827) (.220) MIN.
22.5 9.2 10 1.0 27 5.8
CV 550 K 20 (.886) (.362) (.394) (.039) (1.063) (.228)
12.5 9.1 7.5 0.8 16 6.1
CV 625 K 10 (.492) (.358) (.295) (.031) (.630) (.240)
16.5 9.2 7.5 0.8 21 6.1 d
CV 625 K 14 R
(.650) (.362) (.295) (.031) (.827) (.240)
22.5 9.7 10 1.0 27 6.3 a
CV 625 K 20 (.886) (.382) (.394) (.039) (1.063) (.248)
12.5 9.7 7.5 0.8 16 6.6
CV 680 K 10 (.492) (.382) (.295) (.031) (.630) (.260)
Typical Part Marking
16.5 9.8 7.5 0.8 21 6.6
CV 680 K 14 (.650) (.386) (.295) (.031) (.827) (.260) MANUFACTURER’S
22.5 10.2 10 1.0 27 6.8 TRADEMARK
CV 680 K 20 (.886) (.402) (.394) (.039) (1.063) (.268) Vrms
MODEL
MM SERIES
DIMENSIONS: MODEL SIZE
(INCHES)
Vn CV 50 K 20
TOLERANCE

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 CV Series - Medium Voltage Disc Varistors

How to Order

CV130K14RL1yy Instructions for Creating Orderable

Part Number:
Series Designator
CV = CV Series 1) Start with base part number in
Max. Continuous Operating Voltage (Vrms) characteristics table
Vn Tolerance
(example: CV130K14).
K = ±10 %
Model Size
5 = 5 mm 14 = 14 mm 2) Add Packaging: R
7 = 7 mm 20 = 20 mm
10 = 10 mm (example part number becomes
Packaging CV130K14R).
R = Reel*
B = Bulk
A = Ammo Pack (Available only upon special request)* 3) Add Lead Style: L1
*Reel and Ammo Pack options not available for Model Size 20.
(example part number becomes
Lead Style
CV130K14RL1).
L1 = Straight Leads
L5 = Crimped Leads
Special Parameters 4) Part number can have no spaces or
YY = Unique two digit suffix is assigned to each customer requesting special parameters. lower case letters.
Please contact Bourns for more information.

Pulse Rating Curves - Protection level with worst-case condition in the tolerance region

4000

2000

1000
800 104
5
600 300
275 250
V (Volts)

230 103
400
5
300 175 1x
275 250
150 140
Imax (Amps)

230 130 2
200 115 102 10
175
5 1 2
140 95 10 3 0
150 75
130 115 10 5 1 0 4
60 101 10 6
50
100 95 75 5
8

80
60 50 100
60 5

40 10-1
10-5 10-4 10-3 10-2 10-1 100 101 102 103 104 101 5 102 5 103 5 1 04
I (Amps) tp (µs)

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 CV Series - Medium Voltage Disc Varistors

Pulse Rating Curves (Continued) - Protection level with worst-case condition in the tolerance region

Model Size 7 - (CV50 ~ CV300)

4000

2000

1000
104
800
5
600 300
275 250
V (Volts)

103 1x
230
400 300 5
175 2
250 10
275 150 140
Imax (Amps)

230 130 115 102 1 2

10 3 0
200 175
5 10 4
150 140 95 10 5

75 10 6
130 115
101
8
60
95 5
100 75
50
80
60 100
50
60 5

40 10-1
10-5 10-4 10-3 10-2 10-1 100 101 102 103 104 101 5 102 5 1 03 5 1 04

I (Amps) tp (µs)

Model Size 10 - (CV50 ~ CV680)

4000

2000
680
625 550
1000 680 510 460
104
800 420 385
625 555500 5
320
600 460
510 300 275 1x
V (Volts)

420 385
250 230 103 2
320
400 5 10
300 275 175 150 10 2
230
Imax (Amps)

250 10 3
140 130 102 1 4
200 115 10 5 0
150 95 5 10 6
175
130
8

140 75
60 101
115 95
5
100 50
80 75
60
100
60 50 5

40 10-1
10-5 10-4 10-3 10-2 10-1 100 101 102 103 104 101 5 102 5 1 03 5 104
I (Amps) tp (µs)

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 CV Series - Medium Voltage Disc Varistors

Pulse Rating Curves (Continued) - Protection level with worst-case condition in the tolerance region

Model Size 14 - (CV50 ~ CV680)

4000

2000

680
625
1000 680 550 510
460 104
800 6 25 420
385 5
550 510 320 1x
600
4 60 420 300 275 2
V (Volts)

250 103
385 230 10
320 5
400 10 2
275
300 175 10 3
2 30 150
Imax (Amps)

250 140 102 10 4

130
200 10 5
115 5 10 6
150
175 95
140 130
8
75 101
1 15 95 60
5
100 50
75 60
80
100
60 50 5

40 10-1
10-5 10-4 10-3 10-2 10-1 100 101 102 103 104 101 5 102 5 103 5 104

I (Amps) tp (µs)

Model Size 20 - (CV50 ~ CV680)

4000

2000

680
625
1000 680 550 510
460 420
800 625 104
385 1x
550 510 320 5
600 2
4 60 420 300 275 10
V (Volts)

250 230 103

400 385 3 20 10 2
5
300 275 10 3
175 150
230 10 4
25 0
Imax (Amps)

140 130
200 102 10 5
150 115
175 95 5 10 6
14 0 13 0
8

75
115 95 60 101
100 50 5
80 75 60
100
60 5
50

40 10-1
10-5 10-4 10-3 10-2 10-1 100 101 102 103 104 101 5 102 5 103 5 104
I (Amps) tp (µs)

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 CV Series - Medium Voltage Disc Varistors

Packaging Specifications - Tape

Conforms to IES Publication 286-2 Ed. 3: 2008-03

Dimension R = 5 mm
ΔP ΔP
Δh Δh
W1
H0
H1 W2
H1 D0

W
H
L P1 d R W0
L1
P0 P
T t

Dimensions on Next Page

Dimension R = 7.5 mm & 10 mm

Δh Δh ΔP ΔP

H1 H1
W1
H0
W2
D0
H

W
L
P1 d R W0
L1
P0 P
T t

Dimensions on Next Page

Reel Ammo Pack (Available upon Special Request)

18
(.709) 265
85 DIA. (10.433)
DIA.
(3.346)
300
(11.811)
DIA.

47
MAX.
(1.850) MM 5
55 DIMENSIONS: (2. 5
16 295
MAX. (INCHES) 5)
(2.165) 4)
(11.61

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 CV Series - Medium Voltage Disc Varistors

Packaging Specifications - Tape (Continued)

Model Size
Symbol Parameter
5 7 10 14 20
18 +1.0/-0.5
W Carrier tape width (.709 +.039/-.020)
5
W0 Hold down tape width MIN.
(.197)...........
9 +0.75/-0.5
W1 Sprocket hole position (.354 +.030/-.020)
Distance between the upper edges of the 3
W2 MAX.
(.118). ..........
carrier tape and hold down tape
1.5 1.7 1.9
T Total tape thickness MAX.
(.059). .........
MAX.
(.067). .........
MAX.
(.075). .........
0.9
t Tape thickness MAX.
(.035). ..........
12.7 ± 1.0 25.4 ± 1.0
P Pitch of component (.500 ± .039) (1.000 ± .039)
12.7 ± 0.3
P0 Feed hole pitch (.500 ± .012)
3.85 ± 0.7 8.95± 0.7 7.7 ± 0.7
P1 Feed hole center to pitch (.152 ± .028) (.352 ± .028) (.303 ± .028)
5 +0.5/-0.2 7.5 +0.5/-0.2 10 +0.5/-0.2
R Lead spacing (.197 +.020/-.008) (.295 +.020/-.008) (.394 +.020/-.008)
±1.3
ΔP Component alignment MAX.
(±.051). ..........
±2
Δh Component alignment MAX.
(±.079). .........
0.6 0.8 1
d Wire diameter MAX.
(.024). .........
MAX.
(.031). ........
MAX.
(.039). ........
4 ± 0.2
D0 Feed hold diameter (.157 ± .008)
18 +2.0/-0.0
H Height from tape center to component base (.709 +.079/-.000)
16 ± 0.5
H0 Seating plane height (.630 ± .020)
32.2 46.5
H1 Component height MAX.
(1.268). ........
MAX.
(1.831). ........
11
L Protrusion - cut out MAX.
(.433). ........
0.5
L1 Protrusion - cut off MAX.
(.020). ........

MM
DIMENSIONS:
(INCHES)

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 CV Series - Medium Voltage Disc Varistors

Packaging Quantities - Bulk

Model Size
Voltage
5 7 10 14 20
50 1500 1500 600 400 300
60 1500 1500 600 400 300
75 1500 1500 600 400 300
95 1500 1000 600 400 300
115 1500 1000 500 400 300
130 1500 1000 500 400 300
140 1500 1000 500 400 300
150 1500 1000 500 400 300
175 1500 1000 500 400 300
230 1000 1000 500 300 300
250 1000 1000 500 300 200
275 1000 1000 500 300 200
300 1000 1000 500 300 200
320 500 300 200
385 400 300 200
420 400 300 200
460 400 300 200
510 400 300 200
550-680 300 300 200

Packaging Quantities - Reel

Model Size
Voltage
5 7 10 14 20
50 1500 1500 1300 700
60 1500 1500 1300 700
75 1500 1500 1300 700
95 1500 1000 1300 600
115 1300 1000 1000 600
130 1300 1000 1000 600
140 1200 1000 1000 600
150 1200 1000 1000 600
175 1200 1000 1000 500
230 1000 1000 1000 500
250 1000 1000 800 400
275 1000 1000 800 400
300 900 1000 800 400
320 800 400
385 700 400
420 700 300
460 600 300
510 600 300
550-680 600 300

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 CV Series - Medium Voltage Disc Varistors

Assembly Recommendations for Through-Hole Components

Very often before soldering through-hole components, their leads

get bent. It is important not to damage the components during lead
POINT TO BE FIXED bending. Damage most commonly incurred during bending is cracks
2 in epoxy parts, which can lead to increased humidity sensitivity of a
(.079) component and, consequentially, a shorter lifetime.
In order to avoid epoxy damage, it is necessary to:
- fix the most sensitive point (epoxy parts) of a component body
- bend the wire at least 2 mm below the end of epoxy parts
Other potential damage to a component which can lead to component
failure or a shorter lifetime is thermal shock during manual soldering
with a soldering iron. This can occur when a soldering iron is placed
too close to one point of the component body and it happens most
MM often when the solder joint is too close to the varistor body.
DIMENSIONS:
(INCHES)

Resistance to Soldering Heat

In the case of automatic wave soldering, it is important to provide sufficient resistance to soldering heat. In order to prevent any
potential problems, internal standards were introduced for testing the resistance to soldering heat of through-hole components: 300 °C,
10 seconds.

Pb-free Wave Soldering Profile Recommendations

Recommended soldering profiles for all above components are in accordance with JEDEC standard curves (J-STD-020D) and are,
therefore, compatible with the Pb-free process.

Lead-free Wave Soldering Profile - Pb-free wave profile requirements for soldering heat resistance of components

t(w1+w2) Parameter Symbol Specification

T3
Preheating temperature gradient 4 °C/sec. max.
Tmerit
MELTING POINT 217 °C Preheating time t1 2 to 5 min.
TEMPERATURE

Min. preheating temperature T1 130 °C

T2 Max. preheating temperature T2 180 °C
Melting temperature/point Tmeltv 217 °C
Time in wave soldering phase
tw1+w2 10 sec.
(w1+w2)
T1
Max. wave temperature (w1+w2) Ts 265 °C +0/-5 °C
Cooling temperature gradient 6° C/sec. max.
t1 TIME
Temperature jump from T2 to T3
T3(w1) - T2 120 °C max
(w1)
Time from 25 °C to T3 (wave
8 min. max.
temperature)

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 CV Series - Medium Voltage Disc Varistors

Reliability Testing Procedures

Varistor test procedures comply with CECC 42200, IEC 1051-1/2 (and AEC-Q200, if applicable). Test results are available upon
customer request. Special tests can be performed upon customer request.

Condition to be
Reliability Parameter Test Tested According to Satisfied after
Testing
CECC 42200, Test 4.20 or
AC/DC Bias Reliability AC/DC Life Test IEC 1051-1, Test 4.20, |δVn (1 mA)| < 10 %
AEC-Q200 Test 8 - 1000 h at UCT
CECC 42200, Test C 2.1 or
IEC 1051-1, Test 4.5 |δVn (1 mA)| < 10 %
Pulse Current Capability Imax 8/20 μs
10 pulses in the same direction at no visible damage
2 pulses per minute at maximum peak current for 10 pulses
CECC 42200, Test C 2.1 or
IEC 1051-1, Test 4.5
10 pulses in the same direction at |δVn (1 mA)| < 10 %
Pulse Energy Capability Wmax 10/1000 μs
1 pulse every 2 minutes at maximum peak current for 10 no visible damage
pulses

|δVn (1 mA)| < 15 %

WLD Capability WLD x 10 ISO 7637, Test pulse 5, 10 pulses at rate of 1 per minute
no visible damage
|δVn (1 mA)| < 15 %
Vjump Capability Vjump 5 min. Increase of supply voltage to V ≥ Vjump for 1 minute
no visible damage
CECC 42200, Test 4.16 or
IEC 1051-1, Test 4.17
a) Dry heat, 16h, UCT, Test Ba, IEC 68-2-2
b) Damp heat, cyclic, the first cycle: 55 °C, 93 % RH, 24 h,
Climatic Sequence Test Db 68-2-4 |δVn (1 mA)| < 10 %
c) Cold, LCT, 2 h, Test Aa, IEC 68-2-1
d) Damp heat cyclic, remaining 5 cycles: 55 °C, 93 % RH,
Environmental and 24 h/cycle, Test Bd, IEC 68-2-30
Storage Reliability
CECC 42200, Test 4.12, Test Na, IEC 68-2-14, |δVn (1 mA)| < 10 %
Thermal Shock
AEC-Q200 Test 16, 5 no visible damage
CECC 42200, Test 4.17, Test Ca, IEC 68-2-3,
Steady State
AEC-Q200 Test 6, 56 days, 40 °C, 93 % RH, |δVn (1 mA)| < 10 %
Damp Heat
AEC-Q200 Test 7: Bias, Rh, T all at 85.
IEC 68-2-2, Test Ba, AEC-Q200 Test 3, 1000 h at maximum
Storage Test |δVn (1 mA)| < 5 %
storage temperature
Continued on Next Page

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 CV Series - Medium Voltage Disc Varistors

Reliability Testing Procedures (Continued)

Condition to be
Reliability Parameter Test Tested According to Satisfied after
Testing
Solderable at
shipment and after
CECC 42200, Test 4.10.1, Test Ta, IEC 68-2-20 solder bath 2 years of storage,
Solderability
and reflow method criteria: >95% must
be covered by solder
for reflow meniscus
Resistance to CECC 42200, Test 4.10.2, Test Tb, IEC 68-2-20 solder bath
|δVn (1 mA)| < 5 %
Soldering Heat nad reflow method
JIS-C-6429, App. 1, 18N for 60 sec. - same for AEC-Q200
Terminal Strength No visual damage
Test 22
JIS-C-6429, App. 2, 2 mm min. |δVn (1 mA)| < 2 %
Board Flex
Mechanical Reliability AEC-Q200 test 21 - Board flex: 2 mm flex min. No visible damage
CECC 42200, Test 4.15, Test Fc, IEC 68-2-6,
AEC-Q200 Test 14
Frequency range 10 to 55 Hz (AEC: 10-2000 Hz) |δVn (1 mA)| < 2 %
Vibration
Amplitude 0.75 m/s2 or 98 m/s2 (AEC: 5 g for 20 minutes) To- No visible damage
tal duration 6 h (3x2 h) (AEC: 12 cycles each of 3 directions)
Waveshape - half sine
CECC 42200, Test 4.14, Test Ea, IEC 68-2-27, AEC-Q200
Test 13.
|δVn (1 mA)| < 10 %
Mechanical Shock Acceleration = 490 m/s2 (AEC: MIL-STD-202-Method 213),
No visible damage
Pulse duration = 11 ms,
Waveshape - half sine; Number of shocks = 3x6
Electrical Transient AEC-Q200 Test 30: Test pulses 1 to 3. |δVn (1 mA)| < 10 %
ISO-7637-1 Pulses
Conduction Also other pulses - freestyle. No visible damage

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 CV Series - Medium Voltage Disc Varistors

Terminology
Term Symbol Definition
Rated AC Voltage ......................... Vrms ..................Maximum continuous sinusoidal AC voltage (<5 % total harmonic distortion) which may be
applied to the component under continuous operation conditions at +25 °C
Rated DC Voltage ......................... Vdc ....................Maximum continuous DC voltage (<5 % ripple) which may be applied to the component
under continuous operating conditions at +25 °C
Supply Voltage.............................. V ........................The voltage by which the system is designated and to which certain operating
characteristics of the system are referred; Vrms = 1.1 x V
Leakage Current ........................... Idc ......................The current passing through the varistor at Vdc and at +25 °C or at any other specified
temperature
Varistor Voltage ............................ Vn ......................Voltage across the varistor measured at a given reference current (In)
Reference Current ........................ In .......................Reference current = 1 mA DC
Clamping Voltage ......................... Vc ......................The peak voltage developed across the varistor under standard atmospheric conditions,
Protection Level when passing an 8/20 μs class current pulse
Class Current................................ Ic........................A peak value of current which is 1/10 of the maximum peak current for 100 pulses at two
per minute for the 8/20 μs pulse
Voltage Clamping Ratio ................ Vc/Vapp .............A figure of merit measure of the varistor clamping effectiveness as defined by the symbols
Vc/Vapp, where (Vapp = Vrms or Vdc)
Jump Start Transient .................... Vjump .................The jump start transient results from the temporary application of an overvoltage in excess
of the rated battery voltage. The circuit power supply may be subjected to a temporary
overvoltage condition due to the voltage regulation failing or it may be deliberately generated
when it becomes necessary to boost start the car.
Rated Single Pulse ....................... Wmax .................Energy which may be dissipated for a single 10/1000 μs pulse of a maximum rated
Transient Energy current, with rated AC voltage or rated DC voltage also applied, without causing device
failure
Load Dump Transient ................... WLD ..................Load Dump is a transient which occurs in automotive environments. It is an exponentially
decaying positive voltage which occurs in the event of a battery disconnect while the alter-
nator is still generating charging current with other loads remaining on the alternator circuit
at the time of battery disconnect.
Rated Peak Single Pulse .............. Imax ...................Maximum peak current which may be applied for a single 8/20 μs pulse, with rated line
Transient Current voltage also applied, without causing device failure
Rated Transient Average .............. P ........................Maximum average power which may be dissipated due to a group of pulses occurring
Power Dissipation within a specified isolated time period, without causing device failure at 25 °C
Capacitance.................................. C........................Capacitance between two terminals of the varistor measured @ 1 kHz
Non-linearity Exponent ................. α ........................A measure of varistor nonlinearity between two given operating currents, In and I1 as
described by I = k V exp(a), where:
- k is a device constant,
- I1 < I < In and
- a log (I1/In)/log(V1/Vn) = 1/log (V1/Vn), where:
- Ir is reference current (1 mA) and Vn is varistor voltage
- I1 = 10 In, V1 is the voltage measured at I1
Response Time............................. tr ........................The time lag between application of a surge and varistor’s “turn-on” conduction action
Varistor Voltage Temperature ....... TC .....................(Vn @ 85 °C - Vn @ 25 °C) / (Vn @ 25 °C) x 60 °C) x 100
Coefficient
Insulation Resistance ................... IR.......................Minimum resistance between shorted terminals and varistor surface
Isolation Voltage ......................................................The maximum peak voltage which may be applied under continuous operating conditions
between the varistor terminations and any conducting mounting surface
Operating Temperature ..............................................The range of ambient temperature for which the varistor is designed to operate continuously
as defined by the temperature limits of its climatic category
Climatic Category ......................... LCT/UCT/DHD ..LCT & UCT = Lower and Upper Category Temperature - the minimum and maximum
ambient temperatures for which a varistor has been designed to operate continuously.
DHD = Dump Heat Test Duration
Storage Temperature ...............................................Storage temperature range without voltage applied
Current/Energy Derating..........................................Derating of maximum values when operated above UCT

REV. E 06/20
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and
P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹

Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
^P[OV\[UV[PJL<ZLYZZOV\SKJOLJRMVYHUKVI[HPU[OLSH[LZ[YLSL]HU[PUMVYTH[PVUHUK]LYPM`[OH[Z\JOPUMVYTH[PVUPZJ\YYLU[
and complete before placing orders for Bourns® products.

The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns®WYVK\J[PUH\ZLYHWWSPJH[PVUTH`]HY`
MYVT[OLKH[HZOLL[JOHYHJ[LYPZ[PJZHUKWHYHTL[LYZK\L[VP[OLJVTIPUH[PVUVM[OL)V\YUZ® product with other components
PU[OL\ZLY»ZHWWSPJH[PVUVYPP[OLLU]PYVUTLU[VM[OL\ZLYHWWSPJH[PVUP[ZLSM;OLJOHYHJ[LYPZ[PJZHUKWHYHTL[LYZVMH)V\YUZ®
WYVK\J[HSZVJHUHUKKV]HY`PUKPɈLYLU[HWWSPJH[PVUZHUKHJ[\HSWLYMVYTHUJLTH`]HY`V]LY[PTL<ZLYZZOV\SKHS^H`Z]LYPM`
the actual performance of the Bourns®WYVK\J[PU[OLPYZWLJPÄJKL]PJLZHUKHWWSPJH[PVUZHUKTHRL[OLPYV^UPUKLWLUKLU[
Q\KNTLU[ZYLNHYKPUN[OLHTV\U[VMHKKP[PVUHS[LZ[THYNPU[VKLZPNUPU[V[OLPYKL]PJLVYHWWSPJH[PVU[VJVTWLUZH[LMVY
KPɈLYLUJLZIL[^LLUSHIVYH[VY`HUKYLHS^VYSKJVUKP[PVUZ

<USLZZ)V\YUZOHZL_WSPJP[S`KLZPNUH[LKHUPUKP]PK\HS)V\YUZ® product as meeting the requirements of a particular industry

Z[HUKHYKLN0:6;:  VYHWHY[PJ\SHYX\HSPÄJH[PVULN<3SPZ[LKVYYLJVNUPaLK)V\YUZPZUV[YLZWVUZPISLMVYHU`
MHPS\YLVMHUPUKP]PK\HS)V\YUZ®WYVK\J[[VTLL[[OLYLX\PYLTLU[ZVMZ\JOPUK\Z[Y`Z[HUKHYKVYWHY[PJ\SHYX\HSPÄJH[PVU<ZLYZ
of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to
[OLPYKL]PJLZVYHWWSPJH[PVUZ

Bourns®WYVK\J[ZHYLUV[YLJVTTLUKLKH\[OVYPaLKVYPU[LUKLKMVY\ZLPUU\JSLHYSPMLZH]PUNSPMLJYP[PJHSVYSPMLZ\Z[HPUPUN
HWWSPJH[PVUZUVYPUHU`V[OLYHWWSPJH[PVUZ^OLYLMHPS\YLVYTHSM\UJ[PVUTH`YLZ\S[PUWLYZVUHSPUQ\Y`KLH[OVYZL]LYLWYVWLY[`
VYLU]PYVUTLU[HSKHTHNL<USLZZL_WYLZZS`HUKZWLJPÄJHSS`HWWYV]LKPU^YP[PUNI`[^VH\[OVYPaLK)V\YUZYLWYLZLU[H[P]LZ
on a case-by-case basis, use of any Bourns®WYVK\J[ZPUZ\JO\UH\[OVYPaLKHWWSPJH[PVUZTPNO[UV[ILZHMLHUK[O\ZPZH[
[OL\ZLY»ZZVSLYPZR3PMLJYP[PJHSHWWSPJH[PVUZPUJS\KLKL]PJLZPKLU[PÄLKI`[OL<:-VVKHUK+Y\N(KTPUPZ[YH[PVUHZ*SHZZ000
KL]PJLZHUKNLULYHSS`LX\P]HSLU[JSHZZPÄJH[PVUZV\[ZPKLVM[OL<UP[LK:[H[LZ

)V\YUZL_WYLZZS`PKLU[PÄLZ[OVZL)V\YUZ®Z[HUKHYKWYVK\J[Z[OH[HYLZ\P[HISLMVY\ZLPUH\[VTV[P]LHWWSPJH[PVUZVUZ\JO
WYVK\J[Z»KH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK¸(WWSPJH[PVUZ¹<USLZZL_WYLZZS`HUKZWLJPÄJHSS`HWWYV]LKPU^YP[PUNI`[^V
H\[OVYPaLK)V\YUZYLWYLZLU[H[P]LZVUHJHZLI`JHZLIHZPZ\ZLVMHU`V[OLY)V\YUZ®Z[HUKHYKWYVK\J[ZPUHUH\[VTV[P]L
HWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\ZPZUV[YLJVTTLUKLKH\[OVYPaLKVYPU[LUKLKHUKPZH[[OL\ZLY»ZZVSLYPZR0M)V\YUZ
L_WYLZZS`PKLU[PÄLZHZ\IJH[LNVY`VMH\[VTV[P]LHWWSPJH[PVUPU[OLKH[HZOLL[MVYP[ZZ[HUKHYKWYVK\J[ZZ\JOHZPUMV[HPUTLU[
VYSPNO[PUNZ\JOPKLU[PÄJH[PVUTLHUZ[OH[)V\YUZOHZYL]PL^LKP[ZZ[HUKHYKWYVK\J[HUKOHZKL[LYTPULK[OH[PMZ\JO)V\YUZ®
Z[HUKHYKWYVK\J[PZJVUZPKLYLKMVYWV[LU[PHS\ZLPUH\[VTV[P]LHWWSPJH[PVUZP[ZOV\SKVUS`IL\ZLKPUZ\JOZ\IJH[LNVY`VM
H\[VTV[P]LHWWSPJH[PVUZ(U`YLMLYLUJL[V)V\YUZ®Z[HUKHYKWYVK\J[PU[OLKH[HZOLL[HZJVTWSPHU[^P[O[OL(,*8Z[HUKHYK
VY¸H\[VTV[P]LNYHKL¹KVLZUV[I`P[ZLSMTLHU[OH[)V\YUZOHZHWWYV]LKZ\JOWYVK\J[MVY\ZLPUHUH\[VTV[P]LHWWSPJH[PVU

Bourns®Z[HUKHYKWYVK\J[ZHYLUV[[LZ[LK[VJVTWS`^P[O<UP[LK:[H[LZ-LKLYHS(]PH[PVU(KTPUPZ[YH[PVUZ[HUKHYKZNLULYHSS`
VYHU`V[OLYNLULYHSS`LX\P]HSLU[NV]LYUTLU[HSVYNHUPaH[PVUZ[HUKHYKHWWSPJHISL[VWYVK\J[ZKLZPNULKVYTHU\MHJ[\YLKMVY
\ZLPUHPYJYHM[VYZWHJLHWWSPJH[PVUZ)V\YUZL_WYLZZS`PKLU[PÄLZ)V\YUZ® standard products that are suitable for use in aircraft
VYZWHJLHWWSPJH[PVUZVUZ\JOWYVK\J[Z»KH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK¸(WWSPJH[PVUZ¹<USLZZL_WYLZZS`HUKZWLJPÄJHSS`
HWWYV]LKPU^YP[PUNI`[^VH\[OVYPaLK)V\YUZYLWYLZLU[H[P]LZVUHJHZLI`JHZLIHZPZ\ZLVMHU`V[OLY)V\YUZ® standard
WYVK\J[PUHUHPYJYHM[VYZWHJLHWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\ZPZUV[YLJVTTLUKLKH\[OVYPaLKVYPU[LUKLKHUKPZH[
the user’s sole risk.

;OL\ZLHUKSL]LSVM[LZ[PUNHWWSPJHISL[V)V\YUZ® custom products shall be negotiated on a case-by-case basis by Bourns

and the user for which such Bourns®J\Z[VTWYVK\J[ZHYLZWLJPHSS`KLZPNULK(IZLU[H^YP[[LUHNYLLTLU[IL[^LLU)V\YUZ
HUK[OL\ZLYYLNHYKPUN[OL\ZLHUKSL]LSVMZ\JO[LZ[PUN[OLHIV]LWYV]PZPVUZHWWSPJHISL[V)V\YUZ® standard products shall
also apply to such Bourns® custom products.

Users shall not sell, transfer, export or re-export any Bourns®WYVK\J[ZVY[LJOUVSVN`MVY\ZLPUHJ[P]P[PLZ^OPJOPU]VS]L[OL

KLZPNUKL]LSVWTLU[WYVK\J[PVU\ZLVYZ[VJRWPSPUNVMU\JSLHYJOLTPJHSVYIPVSVNPJHS^LHWVUZVYTPZZPSLZUVYZOHSS[OL`\ZL
Bourns®WYVK\J[ZVY[LJOUVSVN`PUHU`MHJPSP[`^OPJOLUNHNLZPUHJ[P]P[PLZYLSH[PUN[VZ\JOKL]PJLZ;OLMVYLNVPUNYLZ[YPJ[PVUZ
HWWS`[VHSS\ZLZHUKHWWSPJH[PVUZ[OH[]PVSH[LUH[PVUHSVYPU[LYUH[PVUHSWYVOPIP[PVUZPUJS\KPUNLTIHYNVZVYPU[LYUH[PVUHS
YLN\SH[PVUZ-\Y[OLY)V\YUZ® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without
WYPVYH\[OVYPaH[PVUMYVT)V\YUZHUKVY[OL<:.V]LYUTLU[ILYLZVSK[YHUZMLYYLKVYYLL_WVY[LK[VHU`WHY[`UV[LSPNPISL
[VYLJLP]L<:JVTTVKP[PLZZVM[^HYLHUK[LJOUPJHSKH[H

;V[OLTH_PT\TL_[LU[WLYTP[[LKI`HWWSPJHISLSH^)V\YUZKPZJSHPTZPHU`HUKHSSSPHIPSP[`MVYZWLJPHSW\UP[P]LJVUZLX\LU[PHS
PUJPKLU[HSVYPUKPYLJ[KHTHNLZVYSVZ[YL]LU\LZVYSVZ[WYVÄ[ZHUKPPHU`HUKHSSPTWSPLK^HYYHU[PLZPUJS\KPUNPTWSPLK^HYYHU[PLZ
VMÄ[ULZZMVYWHY[PJ\SHYW\YWVZLUVUPUMYPUNLTLU[HUKTLYJOHU[HIPSP[`
)RU\RXUFRQYHQLHQFHFRSLHVRIWKLV/HJDO'LVFODLPHU1RWLFHZLWK*HUPDQ6SDQLVK-DSDQHVH7UDGLWLRQDO&KLQHVHDQG6LPSOLÀHG&KLQHVH
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
*9