0% found this document useful (0 votes)
17 views1 page

Assignment June11

Uploaded by

Jaaa Reeed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
17 views1 page

Assignment June11

Uploaded by

Jaaa Reeed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1. A reversed Carnot refrigeration cycle operates between a cold reservoir at 5°C and a hot reservoir at 70°C.

Determine the COP (Coefficient of Performance) for the refrigeration cycle, and calculate the amount of
heat absorbed from the cold reservoir when 1500 J of work is done by the cycle.

2. A heat engine operates between a hot reservoir at 500°C and a cold reservoir at 50°C. The engine
produces 2000 J of work. Calculate the efficiency of the heat engine and the amount of heat rejected to
the cold reservoir.

3. An ammonia simple saturation cycle operates between evaporator and condenser temperatures of -20
deg C and 35 degC, respectively. The system is to be used in producing 5000 kg of ice at -12 degC from
water at 29 deg C in 20 hours. Assuming losses to be 20% of the heat to be absorbed from the water,
determine:
a) the mass flow rate
b) the heat rejected in the condenser
c) the power required by the compression

4. A refrigeration system is operating under conditions such that the vaporizing temperature is -5ᵒC, while
the temperature of the liquid refrigerant approaching expansion valve is 30ᵒC. If R-134a is circulated
through system at the rate of 0.3 kg/s, determine the following:
a) refrigerating capacity of the system in KW
b) refrigerating capacity of the system in tons
c) How much work done by the compressor?

You might also like