Enb-Ttibundling CFG

/* lteenb configuration file version 2022-02-14
* Copyright (C) 2015-2022 Amarisoft

*/
#define TDD 0 // Values: 0 (FDD), 1(TDD)

#define N_RB_DL 25 // Values: 6 (1.4 MHz), 15 (3MHz), 25 (5MHz), 50
(10MHz), 75 (15MHz), 100 (20MHz)
#define N_ANTENNA_DL 2 // Values: 1 (SISO), 2 (MIMO 2x2)
#define N_ANTENNA_UL 2 // Values: 1, 2
#define CHANNEL_SIM 0 // Values: 0 (channel simulator disabled), 1 (channel
simulator enabled)
#define NG_ENB 0 // 1 for ng-eNB
{
/* Log filter: syntax: layer.field=value[,...]
Possible layers are phy, mac, rlc, pdcp, rrc, nas, s1ap, x2ap, gtpu and
all. The 'all' layer is used to address all the layers at the
same time.
field values:
- 'level': the log level of each layer can be set to 'none',

'error', 'info' or 'debug'. Use 'debug' to log all the messages.
- 'max_size': set the maximum size of the hex dump. 0 means no

hex dump. -1 means no limit.
*/
//log_options: "all.level=debug,all.max_size=32",
log_options:
"all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,s1ap.level=debug,s1a
p.max_size=1,x2ap.level=debug,x2ap.max_size=1,rrc.level=debug,rrc.max_size=1",
log_filename: "/tmp/enb0.log",
/* Enable remote API and Web interface */

com_addr: "0.0.0.0:9001",
/* RF driver configuration */
include "rf_driver/config.cfg",
#if CHANNEL_SIM == 1
rf_ports: [
{
channel_dl: {
type: "awgn",
noise_level: -30,
},
}
],
#endif
mme_list: [
{
/* address of MME for S1AP connection. Must be modified if the MME
runs on a different host. */
mme_addr: "127.0.1.100",
},
],
#if NG_ENB == 1
amf_list: [
{
/* address of AMF for NGAP connection. Must be modified if the AMF
runs on a different host. */
amf_addr: "127.0.1.100",
},
],
#endif
/* GTP bind address (=address of the ethernet interface connected to
the MME). Must be modified if the MME runs on a different host. */
gtp_addr: "127.0.1.1",
/* high 20 bits of SIB1.cellIdentifier */

enb_id: 0x1A2D0,
/* list of cells */
cell_list: [
{
/* Broadcasted PLMN identities */
plmn_list: [
"00101",
],
#if NG_ENB == 1
plmn_list_5gc: [ {
tac: 10,
plmn_ids: [{ plmn: "00101", reserved: false }],
}],
#endif
#if TDD == 1
//dl_earfcn: 38050, /* 2600 MHz (band 38) */
dl_earfcn: 40620, /* 2593 MHz (band 41) */
#else
//dl_earfcn: 300, /* DL center frequency: 2132 MHz (Band 1) */
//dl_earfcn: 1575, /* DL center frequency: 1842.5 MHz (Band 3) */
//dl_earfcn: 2525, /* DL center frequency: 881.5 MHz (Band 5) */
dl_earfcn: 3350, /* DL center frequency: 2680 MHz (Band 7) */
//dl_earfcn: 6300, /* 806 MHz (Band 20) */
#endif
n_id_cell: 1,
cell_id: 0x01,
tac: 0x0001,
root_sequence_index: 204, /* PRACH root sequence index */
},
], /* cell_list */
/* default cell parameters */

cell_default: {
n_antenna_dl: N_ANTENNA_DL, /* number of DL antennas */
n_antenna_ul: N_ANTENNA_UL, /* number of UL antennas */
#if TDD == 1
uldl_config: 2, /* TDD only */
sp_config: 7, /* TDD only */
#endif
n_rb_dl: N_RB_DL, /* Bandwidth: 25: 5 MHz, 50: 10 MHz, 75: 15 MHz, 100: 20 MHz
*/
cyclic_prefix: "normal",
phich_duration: "normal",
phich_resource: "1", /* ratio of NG */
/* SIB1 */
si_value_tag: 0, /* increment modulo 32 if SI is modified */
cell_barred: false, /* SIB1.cellBarred-r13 */
intra_freq_reselection: true, /* SIB1.intraFreqReselection */
q_rx_lev_min: -70, /* SIB1.q-RxLevMin */
p_max: 10, /* maximum power allowed for the UE (dBm) */
si_window_length: 40, /* ms */
sib_sched_list: [
{
filename: "sib2_3.asn",
si_periodicity: 16, /* frames */
},
],
#if N_RB_DL == 6
si_coderate: 0.30, /* maximum code rate for SI/RA/P-RNTI messages */
#else
si_coderate: 0.20, /* maximum code rate for SI/RA/P-RNTI messages */
#endif
si_pdcch_format: 2, /* 2 or 3. Log2 of the number of CCEs for PDCCH
for SI/RA/P-RNTI */
n_symb_cch: 0, /* number of symbols for CCH (0 = auto) */
/* PDSCH dedicated config (currently same for all UEs) */

pdsch_dedicated: {
#if N_ANTENNA_DL == 4
p_a: -6,
#elif N_ANTENNA_DL == 2
p_a: -3,
#else
p_a: 0,
#endif
p_b: -1, /* -1 means automatic */
},
/* If defined, force for number of CCEs for UE specific PDCCH to

2^pdcch_format. Otherwise it is computed from the reported
CQI. Range: 0 to 3. */
#if N_RB_DL == 6
pdcch_format: 1,
#else
pdcch_format: 2,
#endif
/* if defined, force the PDSCH MCS for all UEs. Otherwise it is

computed from the reported CQI */
/* pdsch_mcs: 12, */
#if N_RB_DL == 6
prach_config_index: 15, /* subframe 9 every 20 ms */
#else
prach_config_index: 4, /* subframe 4 every 10 ms */
#endif
prach_freq_offset: -1, /* -1 means automatic */
/* PUCCH dedicated config (currently same for all UEs) */

pucch_dedicated: {
n1_pucch_sr_count: 11, /* increase if more UEs are needed */
cqi_pucch_n_rb: 1, /* increase if more UEs are needed */
#if TDD == 1
//tdd_ack_nack_feedback_mode: "bundling", /* TDD only */
tdd_ack_nack_feedback_mode: "multiplexing", /* TDD only */
#endif
},
/* PUSCH dedicated config (currently same for all UEs) */

pusch_dedicated: {
beta_offset_ack_index: 9,
beta_offset_ri_index: 6,
beta_offset_cqi_index: 6,
},
pusch_hopping_offset: -1, /* -1 means automatic */
/* MCS for Msg3 (=CCCH RRC Connection Request) */

pusch_msg3_mcs: 0,
/* this CQI value is assumed when none is received from the UE */

#if N_RB_DL == 6
initial_cqi: 5,
#else
initial_cqi: 3,
#endif
/* if defined, force the PUSCH MCS for all UEs. Otherwise it is

computed from the last received SRS/PUSCH. */
// pusch_mcs: 18,
dl_256qam: true,
ul_64qam: true,
/* Scheduling request period (ms). Must be >= 40 for HD-FDD */

sr_period: 20,
/* CQI report config */

cqi_period: 40, /* period (ms). Must be >= 32 for HD-FDD */
#if N_ANTENNA_DL >= 2

/* RI reporting is done with a period of m_ri * cqi_period.
m_ri = 0 (default) disables RI reporting. */
m_ri: 8,
/* transmission mode */
transmission_mode: 3,
#endif
/* SRS dedicated config. All UEs share these

parameters. srs_config_index and freq_domain_position are
allocated for each UE) */
srs_dedicated: {
#if N_RB_DL == 6
srs_bandwidth_config: 7,
srs_bandwidth: 1,
#elif N_RB_DL == 15
srs_bandwidth: 1,
#elif N_RB_DL == 25
srs_bandwidth: 1,
#elif N_RB_DL == 50
srs_bandwidth: 2,
#elif N_RB_DL == 75
srs_bandwidth: 2,
#else
srs_bandwidth: 3,
#endif
srs_subframe_config: 3, /* 0 - 15 */
srs_period: 40, /* period (ms). Must be >= 40 for HD-FDD */
srs_hopping_bandwidth: 0,
},
/* MAC configuration (same for all UEs) */

mac_config: {
ul_max_harq_tx: 5, /* max number of HARQ transmissions for uplink */
dl_max_harq_tx: 5, /* max number of HARQ transmissions for downlink */
tti_bundling: {
snr_threshold: 23,
phr_threshold: 10,
hysteresis: 1,
},
},
/* CPU load limitation */

pusch_max_its: 6, /* max number of turbo decoder iterations */
/* dynamic power control */

dpc: true,
dpc_pusch_snr_target: 25,
dpc_pucch_snr_target: 20,
/* RRC/UP ciphering algorithm preference. EEA0 is always the last. */

cipher_algo_pref: [],
/* RRC integrity algorithm preference. EIA0 is always the last. */
integ_algo_pref: [2, 1],
/* (in ms) send RRC connection release after this time of network
inactivity */
inactivity_timer: 10000,
/* SRB configuration */
srb_config: [
{
id: 1,
maxRetxThreshold: 32,
t_Reordering: 45,
t_PollRetransmit: 60,
},
{
id: 2 ,
maxRetxThreshold: 32,
t_Reordering: 45,
t_PollRetransmit: 60,
}
],
/* DRB configuration */
drb_config: "drb.cfg",
},
}

Enb-Ttibundling CFG

Uploaded by

Copyright:

Available Formats

Enb-Ttibundling CFG

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Enb-Ttibundling CFG

Uploaded by

Copyright:

Available Formats

/* lteenb configuration file version 2022-02-14

* Copyright (C) 2015-2022 Amarisoft

#define TDD 0 // Values: 0 (FDD), 1(TDD)

- 'level': the log level of each layer can be set to 'none',

- 'max_size': set the maximum size of the hex dump. 0 means no

/* Enable remote API and Web interface */

/* high 20 bits of SIB1.cellIdentifier */

/* default cell parameters */

n_symb_cch: 0, /* number of symbols for CCH (0 = auto) */

/* PDSCH dedicated config (currently same for all UEs) */

/* If defined, force for number of CCEs for UE specific PDCCH to

/* if defined, force the PDSCH MCS for all UEs. Otherwise it is

/* PUCCH dedicated config (currently same for all UEs) */

/* PUSCH dedicated config (currently same for all UEs) */

pusch_hopping_offset: -1, /* -1 means automatic */

/* MCS for Msg3 (=CCCH RRC Connection Request) */

/* this CQI value is assumed when none is received from the UE */

/* if defined, force the PUSCH MCS for all UEs. Otherwise it is

/* Scheduling request period (ms). Must be >= 40 for HD-FDD */

/* CQI report config */

#if N_ANTENNA_DL >= 2

/* SRS dedicated config. All UEs share these

/* MAC configuration (same for all UEs) */

/* CPU load limitation */

/* dynamic power control */

/* RRC/UP ciphering algorithm preference. EEA0 is always the last. */

You might also like