Overview

S10 (See Figure 1) is a touch screen which is specially designed for home and building automation. It adopts a 64 bit 4
core high-performance CPU and equipped with a 800x1280 high-definition IPS display and multi-point capacitive touch
screen. This touch screen also has a variety of physical interface extensions to connect to other systems, such as, dry
HDL-MTS10B.2WI contact inputs to connect to various types of security sensors, dry contact outputs to drive magnetic valve or curtain, KNX
interface to connect to KNX home and building automation control system, Buspro interface to connect to HDL Buspro
S10/10 Inch Touch Screen system to control villa automation applications, temperature sensor to monitor room temperature, etc. The touch screen is
with built-in hardware echo cancellation circuit, which can eliminate the echo occurs during two-way audio call process.
The high-sensitivity MIC and the low-distortion speakers are very good at restoring real sound and very suitable for visual
intercom applications. The built-in sensor detects the movement of the body in real time. When human body is close to the
touch screen, the app can automatically wake up the screen backlight and provide a very convenient control mode.
Datasheet
Issued: May 26, 2021
File Edition: V1.0.1
Functions
■ 4 channels relay output
■ Supports 6 channels dry contact input
■ Built-in echo cancellation
■ Built-in motion sensor and temperature sensor
■ Supports connecting LAN and internet via wired Ethernet port (RJ45)
■ Supports connecting USB flash drive and USB mouse
■ Built-in RTC
■ Supports TF card installation for storage capacity expansion
■ Supports most of the Android applications
■ Supports HDL Buspro communication (needs to install corresponding Apps.)
■ Supports KNX communication (needs to install corresponding Apps.)

Figure 1. S10/10 Inch Touch Screen

Important Notes
■ The touch screen must be installed in a special-designed metal wall box.
270mm 4 ■ The relay output channels can be used for signal switch or magnetic valve control. But they cannot control high
5 power load. The rated voltage and current is DC30V, 1A Max.

6
1
Product Information
209mm

Product dimensions - See Figure 2, 3 , 4-1 and 4-2

1. Camera
2 3
2. Speaker
3. Microphone
9mm 4. Return button
16mm 5. Power on/off
40mm 6. TF card slot
Figure 2 Figure 3 7. RJ45 port
8. USB2.0 interface
9. 6 channels dry contact input port
10. Power socket
11. HDL Buspro interface
12. KNX interface
13. 4 channels relay output port
14. Clock battery cover
Note: Only one interface should be chosen from 10 and 11 for power supply. If both 10 and 11 are used for power supply,
the voltage must not exceed 25V.
Figure 4-1
RTC battery replacement: Rotate the battery cover counterclockwise, then open the cover, remove the invalid battery and
7 8 9 install the new battery. Lastly, reinstall the cover, rotate the cover clockwise and lock it.

Safety Precautions
■ The installation and testing for the product must be carried out by HDL Automation Co., Ltd. or its appointed service
agencies. The electric construction shall comply with local laws and safety regulations.
10
■ The device should be installed in a special-designed metal wall box. HDL will not be responsible for any conse-
quence caused by the inexpert or faulty installation and wiring methods, which are not in accordance with the in-
12 13
structions contained in this operating instruction.
11 ■ Please do not privately disassemble or replace any parts of the product. Otherwise, it may cause mechanical fault,
electric shock, fire or personal injuries.
■ Please contact our after-sales departments or our designated service agencies for your maintenance service. Prod-
uct failures caused by private disassembly are not subject to this warranty.

14
Package Contents
HDL-MTS10B.2WI (With metal wall box) *1 / CR2032 battery*1 / 8-bit wiring*2/ Datasheet*1
Figure 4-2
Figure 2 - 4-2. Dimensions 1/2
 Technical Data
Basic Parameters
Working voltage 9~25V DC

Power Max. 12W

Relay output 4CH, 1A 30V DC Max. per channel

CPU Allwinner A64, 64bit 4 core

DDR 1GB DDR3

Flash 8GB EMMC Flash

Communication protocol HDL Buspro/KNX

Touch screen Capacitive screen

Figure 5
Screen dimensions 10.1 inch

Screen resolution 800*1280

1 Screen ratio 16:10

Operation system Android 5.1

Ethernet port RJ45 10/100 M

A1 A1
TF card Max. 128GB

Camera 2.0 megapixel, 1616x1232

External Environment
Working temperature -5℃~45℃

Working relative humidity ≤90%

Figure 6 Figure 7
Storage temperature -20℃~60℃

Storage relative humidity ≤93%

Specifications
2 Touch screen: 270×209×40(mm)
Dimensions
Metal wall box: 263×203×51(mm)
Net weight Touch screen: 920g, Metal wall box:1110g
10 inch touch screen: 1000g
Shipping weight
Metal wall box:1250g
Housing material Glass, PC, ABS, Aluminum alloy

Installation Wall box (See Figure 5-8)

Battery CR2032(3VDC, non-rechargeable)

Protection rating (Compliant with EN 60529) IP20

Figure 8 Approved
Figure 5 - 8. Installation CE

RoHS

HDL Buspro Cable Guide

HDL Buspro HDL Buspro Cable

DATA+ Yellow

DATA- White

COM Black

24V DC Red

KNX Cable Guide

KNX KNX Cable

- Black

+ Red

Installation
Technical support Device installation (See Figure 5-8): Install the special metal wall box in wall and ensure the wall box is 0.5mm higher than
wall surface. Connect power socket and communication interfaces of the touch screen. Hold both edges of the 10 inch
E-mail: [email protected]
touch screen, align and buckle fasteners A1 into the fastener holes, then push the touch screen down to fasten the fastener
Website: https://www.hdlautomation.com holes of the wall box. The magnet is attached to the lower bottom of the touch screen, then the touch screen will be
attached and fixed into the wall box.
©Copyright by HDL Automation Co., Ltd. All rights reserved.
Specifications subject to change without notice.
2/2