TDS - Canroyal Semi-Synthetic Engine Oil Sae 10W-30 Api SN GF-5

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

TDS OF

CANROYAL SEMI-SYNTHETIC ENGINE OIL SAE 10W-30 API SN GF-5


DESCRIPTION
Canroyal Semi Synthetic SAE 10W-30 API SN GF-5 are premium high-performance multi-grade engine oils
formulated from high quality base oils combined with CHEVRON performance additives to help provide long engine life
and providing wide temperature range engine protection. The advanced product technology offers a long drain interval of
7,000 Km to 10,000 Km, and the formulation that helps maximize engine durability.
APPLICATIONS
Canroyal Semi Synthetic SAE 10W-30 API SN GF-5 is a top-tier motor oil designed to lubricate gasoline
passenger cars, racing cars, vans, light trucks and 4WD recreational vehicles with exhaust treatment.
Properties
Canroyal Semi Synthetic SAE 10W-30 API SN GF-5 is a high-performance engine oil with low viscosity
specifically developed to provide the highest fuel economy and lowest CO2 emissions.
Performance
Longer oil life and lower oil consumption with outstanding protection against wear, rust, corrosion, soot
handling and exceptional engine cleanliness.

Features and Benefits


•High performance lubricant. • Excellent engine protection, particularly against wear
• Outstanding thermal stability and resistance to of the distribution system.
oxidation, preventing any degradation, even • Fuel saving because of easy running characteristics.
extreme usage conditions.
• Immediate lubrication of all engine components • Prevention of black sludge creation.
during cold starts, meaning longer engine life.
API SN, SM, ILSAC GF-5, GF-4.
International Standards ACEA: A3/B3-04, A3/B4-04, C3-08

Meets or exceeds PORSCHE A40, Opel GM-LL-B-025, Renault RN0700


/ RN0710, BMW Longlife-04, VW/Audi
502.00/505.00/505.01, Dexos 1, FIAT 9.55535-S1

Meets quality requirements of most gasoline engine manufacturers in the USA, Europe, Japan and Korea
Typical Properties
Typical Data Unit Test Method Results
Viscosity Grade SAE J300 10W-30
Density at 15⁰C g/mL ASTM D4052 0.850
Cold Cranking Viscosity (CCS) at -25⁰C mPa s ASTM D5293 6000
Kinematic Viscosity at 40⁰C mm²/s ASTM D445 57.0
Kinematic Viscosity at 100⁰C mm²/s ASTM D445 10.18
Viscosity Index - ASTM D2270 167
Flash Point °C ASTM D92 225
Pour Point °C ASTM D97 -39
Total Base Number mg KOH/g ASTM D2896 7.99
Note: The information contained herein is subject to change without notification. Typical Properties may vary slightly.
Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for the intended application
and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contact
office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing off used product, take care to protect the
environment.

You might also like