GENERAL

ProduCt
OVERVIEW

Regulators with auxiliary energy

●● Control valves Page 2
●● Control valves with bellows seal
●● Butterfly valves

Regulators - self operated

●● Pressure reducing valves Page 4
●● Excess pressure regulator
●● Pressure regulating valves
●● Temperature regulators

Hand operated stop valves

●● Stop valves with bellows seal Page 6
●● Stop valves with gland seal
●● Changeover valves
●● Butterfly valves

Automated stop valves

●● Stop valves with gland seal Page 10
●● Stop valves with bellows seal
●● Process valves
●● Blow down valves
●● Butterfly valves

Other valves
●● Check valves Page 12
●● Strainer

Safety valves
●● Full lift and standard safety valves Page 14

Steam traps
DIN/EN ●● Bimetallic steam traps Page 16
●● Thermostatic steam traps
●● Thermodynamic steam traps
●● Ball float steam traps
●● Components
●● Accessories

ANSI Building technology (HVAC)

●● Stop valves with soft seal Page 24
(SI-Units) ●● Combined flow regulating valve
●● Butterfly valves
●● Safety valves for heating

Approvals
Page 28
ANSI
(US-Units)
ARI-Product overview
Flow media / Tests and certifications

Selection of possible flow media Tests / Certifications

Control Fluid group 1 Fluid group 2

Press. equip. directive 97/23/EG

Water (low in oxygen)
Water, demineralized
Diesel / Fuel oil EL1

DVGW-Registration
Seawater < 25°C
neutral gases3

Water-glycol
Natural gas

Thermal oil
Petroleum

Fuel oil S2
Ammonia

Methane
Oxygen
Biogas
Body- Catalogue

Steam
Petrol
Figure No. Nominal diameter Nominal pressure Material Register Technical rules

Air
Control valves
STEVI® 12. 440 / DN 15 - 250 PN 16 EN-JL1040 A1/2 ✔ -- Type approval according to DIN 32730
470 / 422 / 425 / (STEVI440 with FR2.1)
22./23. 450 / 423 DN 15 - 300 PN 16 - 25 EN-JS1049 A1/2 ✔
-- DIN 32730
34./35. 445 / 446 DN 15 - 500 PN 25 - 40 1.0619+N A1/2 ✔ Control valves for water and steam
55. DN 15 - 250 PN 25 - 40 1.4408 A1/2 ✔
32./35. 470....90 NPS 1“ - 8“ ANSI 150 - 300 SA216WCB A1
45. 440....90 NPS 1/2“ - 2“ ANSI 150 - 300 SA105 A1
STEVI® 12. 460 / 441 / DN 15 - 250 PN 16 EN-JL1040 A1/2 ✔
Regulators with auxiliary energy

(Stainless steel- 471 / 462 / 426 /

bellows seal) 22./23. 451 / 463 DN 15 - 300 PN 16 - 25 EN-JS1049 A1/2 ✔ -- TA Luft
Technical rules for clean air
34./35. DN 15 - 500 PN 25 - 40 1.0619+N A1/2 ✔ (with actuator DP)
55. DN 15 - 250 PN 25 - 40 1.4408 A1/2 ✔
32./35. 471....90 NPS 1“ - 8“ ANSI 150 - 300 / SA216WCB A1
PN 40
45. 441....90 NPS 1/2“ - 2“ ANSI 150 - 300 SA105 A1
STEVI ®
36. 472 DN 15 - 125 PN 63 1.0619+N A1 ✔
Medium pressure
37. DN 15 - 125 PN 100 1.0619+N A1 ✔
38. DN 15 - 125 PN 160 1.0619+N A1 ✔
86. DN 15 - 125 PN 63 1.7379 A1 ✔
87. DN 15 - 125 PN 100 1.7379 A1 ✔
88. DN 15 - 125 PN 160 1.7379 A1 ✔
Butterfly valves
ZETRIX® 32./34./35. 016 DN 150 - 600 PN 10 - 40 1.0619+N B6 ✔
32./35. 016....90 NPS 6“ - 24“ ANSI 150 - 300 SA216WCB B3
51./52. 016 DN 150 - 600 PN 10 - 40 1.4408 B6 ✔
/54./55.
52./55. 016....90 NPS 6“ - 24“ ANSI 150 - 300 SA351CF8M B3

A1 DIN/EN A1 ANSI applicable / please contact the manufacturer / 1 extra light / 2 heavy / 3 f. ex. nitrogen

2 Technical data of the valves refer to the corresponding data sheet. Information / restriction of technical rules need to be obseerved! Resistance and fitness must be verified (contact manufacturer for information, Resistance list with detailed flow media specifications can be found on www.ari-armaturen.com). 3
The engineer, designing a system or a plant, is responsible for the selection of the correct valve. Edition 08/13 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com!
ARI-Product overview
Flow media / Tests and certifications

Selection of possible flow media Tests / Certifications

Control Fluid group 1 Fluid group 2

Press. equip. directive 97/23/EG

Water (low in oxygen)
Water, demineralized
Diesel / Fuel oil EL1

DVGW-Registration
Seawater < 25°C
neutral gases3

Water-glycol
Natural gas

Thermal oil
Petroleum

Fuel oil S2
Ammonia

Methane
Oxygen
Biogas
Body- Catalogue

Steam
Petrol
Figure No. Nominal diameter Nominal pressure Material Register Technical rules

Air
Pressure reducing valves
PREDU® 12. 701 DN 15 - 150 PN 16 EN-JL1040 A6 ✔ -- AD2000-A4
Bodies from equipment
22./23. DN 15 - 150 PN 16 - 25 EN-JS1049 A6 ✔
32./35. DN 15 - 150 PN 16 - 40 1.0619+N A6 ✔
32./35. 701....90 NPS 1“ - 6“ ANSI 150 - 300 SA216WCB A4

Excess pressure regulator

PREDEX® 12. 705 DN 15 - 150 PN 16 EN-JL1040 A6 ✔ -- AD2000-A4
Regulators - self operated

Bodies from equipment

22./23. DN 15 - 150 PN 16 - 25 EN-JS1049 A6 ✔
32./35. DN 15 - 150 PN 16 - 40 1.0619+N A6 ✔
32./35. 705....90 NPS 1“ - 6“ ANSI 150 - 300 SA216WCB A4

Pressure regulating valves

PRESO® 12. 753 DN 15 - 100 PN 16 EN-JL1040 A6 ✔ -- AD2000-A4
Bodies from equipment
22. DN 15 - 100 PN 16 EN-JS1049 A6 ✔
-- AD2000-A2
32. DN 15 - 100 PN 16 1.0619+N A6 ✔ Safety appliances against excess pressure
52. DN 15 - 100 PN 16 1.4408 safety valves
A6 ✔
-- TA Luft
Technical rules for clean air

Temperature regulators
TEMPTROL® 12. 771 / 772, PN 16 DN 15 -100 EN-JL1040 A6 ✔ -- VdTÜV Reg. No.
773 / 774, TR910/TW911 (DIN CERTCO)
22./23. 775 PN 16 - 25 DN 15 -100 EN-JS1049 A6 ✔
-- DIN EN 14597
35. PN 40 DN 15 -100 1.0619+N A6 ✔ Temperature control devices temperature limiters for heat
55. PN 40 DN 15 -100 1.4408 generating systems
A6 ✔

A1 DIN/EN A1 ANSI applicable / please contact the manufacturer / 1 extra light / 2 heavy / 3 f. ex. nitrogen

4 Technical data of the valves refer to the corresponding data sheet. Information / restriction of technical rules need to be obseerved! Resistance and fitness must be verified (contact manufacturer for information, Resistance list with detailed flow media specifications can be found on www.ari-armaturen.com). 5
The engineer, designing a system or a plant, is responsible for the selection of the correct valve. Edition 08/13 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com!
ARI-Product overview
Flow media / Tests and certifications

Selection of possible flow media Tests / Certifications

ISOLATION Fluid group 1 Fluid group 2

Press. equip. directive 97/23/EG

Water (low in oxygen)
Water, demineralized
Diesel / Fuel oil EL1

DVGW-Registration
Seawater < 25°C
neutral gases3

Water-glycol
Natural gas

Thermal oil
Petroleum

Fuel oil S2
Ammonia

Methane
Oxygen
Biogas
Body- Catalogue

Steam
Petrol
Figure No. Nominal diameter Nominal pressure Material Register Technical rules

Air
Stop valves with bellows seal
FABA®Plus 12. 046, 047 DN 15 - 300 PN 16 EN-JL1040 B1 ✔ -- TA Luft
Technical rules for clean air
22./23. 046, 047 DN 15 - 350 PN 16 - 25 EN-JS1049 B1 ✔ ✔ -- DIN EN 1074-1/-2 / DIN EN 13774
Stop valves for gas and water PN 4 up to PN16
35. 046, 040, 066, 047 DN 15 - 400 PN 25 - 40 1.0619+N -- DIN EN 14141
B1 ✔ ✔ Stop valves for gas above PN16
-- DIN 3230 T5/T6 / DIN EN 12266
45. 046, 040 DN 15 - 50 PN 40 1.0460 B1 ✔ ✔ Technical conditions of delivery for valves
-- AD2000-A4
Hand operated stop valves

52./55. 046, 069 DN 15 - 250 PN 16 - 40 1.4408 B1 ✔ Bodies from equipment

-- TA Luft
62./65. 046, 069 DN 15 - 250 PN 16 - 40 1.4408 Body B1 ✔ Technical rules for clean air
1.0619+N Bonnet
54./55. 066 DN 15 - 200 PN 25 - 40 1.4408 B1 ✔
32./35. 041 DN 15 - 250 ANSI 150 - 300 SA216WCB B1
45. 049 DN 15 - 50 ANSI 300 SA105 B1
FABA®Supra I 34./35. 146, 140, 166, 147 DN 15 - 400 PN 25 - 40 1.0619+N B1 ✔ -- DIN EN 14141
Stop valves for gas above PN16
44./45. 146, 140 DN 15 - 50 PN 25 - 40 1.0460 B1 ✔
-- DIN 3230 T5/T6 / DIN EN 12266
54./55. 146, 169, 166 DN 15 - 250 PN 25 - 40 1.4408 B1 ✔ Technical conditions of delivery for valves
32./35. 141 DN 15 - 250 ANSI 150 - 300 SA216WCB B1 -- AD2000-A4
Bodies from equipment
45. 149 DN 15 - 50 ANSI 300 SA105 B1
FABA®Supra C 34./35. 146, 140, 166, 147 DN 15 - 400 PN 25 - 40 1.0619+N B1 ✔
44./45. 146, 140 DN 15 - 50 PN 25 - 40 1.0460 B1 ✔
54./55. 146, 169, 166 DN 15 - 250 PN 25 - 40 1.4408 B1 ✔
32./35. 141 DN 15 - 250 ANSI 150 - 300 SA216WCB B1
45. 149 DN 15 - 50 ANSI 300 SA105 B1

A1 DIN/EN A1 ANSI applicable / please contact the manufacturer / 1 extra light / 2 heavy / 3 f. ex. nitrogen

6 Technical data of the valves refer to the corresponding data sheet. Information / restriction of technical rules need to be obseerved! Resistance and fitness must be verified (contact manufacturer for information, Resistance list with detailed flow media specifications can be found on www.ari-armaturen.com). 7
The engineer, designing a system or a plant, is responsible for the selection of the correct valve. Edition 08/13 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com!
ARI-Product overview
Flow media / Tests and certifications

Selection of possible flow media Tests / Certifications

ISOLATION Fluid group 1 Fluid group 2

Press. equip. directive 97/23/EG

Water (low in oxygen)
Water, demineralized
Diesel / Fuel oil EL1

DVGW-Registration
Seawater < 25°C
neutral gases3

Water-glycol
Natural gas

Thermal oil
Petroleum

Fuel oil S2
Ammonia

Methane
Oxygen
Biogas
Body- Catalogue

Steam
Petrol
Figure No. Nominal diameter Nominal pressure Material Register Technical rules

Air
Stop valves with gland seal
STOBU® 12. 006/306, 007/307 DN 15 - 300 PN 16 EN-JL1040 B2 ✔
22./23. 006/306, 007/307 DN 15 - 350 PN 16 - 25 EN-JS1049 B2 ✔
34./35. 006/306, 005, DN 15 - 500 PN 25 - 40 1.0619+N B2 ✔
007/307
45. 006, 005 DN 15 - 50 PN 40 1.0460 B2 ✔
48. 006, 005 DN 10 - 100 PN 63 - 160 1.0460 B2 ✔
52./54./ 55. 006, 009 DN 15 - 200 PN 16 - 40 1.4408 B2 ✔
Hand operated stop valves

88. 006, 005 DN 10 - 100 PN 63 - 160 1.7335 B2 ✔

Changeover valves
Changeover valves 12. 017 DN 15 - 250 PN 16 EN-JL1040 B5 ✔
34./35. DN 15 - 250 PN 25 - 40 1.0619+N B5 ✔

Butterfly valves
ZIVA®-Z 20./21./22. 014 DN 25 - 600 PN 6 - 16 EN-JS1049 B6 ✔

ZIVA®-G 21./22. 015 DN 25 - 600 PN 10 - 16 EN-JS1049 B6 ✔

ZETRIX® 32./34./35. 016 DN 150 - 600 PN 10 - 40 1.0619+N B6 ✔ -- Fire-safe

32./35. 016....90 NPS 6“ - 24“ ANSI 150 - 300 SA216WCB B3
51./52. 016 DN 150 - 600 PN 10 - 40 1.4408 B6 ✔
/54./55.
52./55. 016....90 NPS 6“ - 24“ ANSI 150 - 300 SA351CF8M B3

A1 DIN/EN A1 ANSI applicable / please contact the manufacturer / 1 extra light / 2 heavy / 3 f. ex. nitrogen

8 Technical data of the valves refer to the corresponding data sheet. Information / restriction of technical rules need to be obseerved! Resistance and fitness must be verified (contact manufacturer for information, Resistance list with detailed flow media specifications can be found on www.ari-armaturen.com). 9
The engineer, designing a system or a plant, is responsible for the selection of the correct valve. Edition 08/13 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com!
ARI-Product overview
Flow media / Tests and certifications

Selection of possible flow media Tests / Certifications

isolation Fluid group 1 Fluid group 2

Press. equip. directive 97/23/EG

Water (low in oxygen)
Water, demineralized
Diesel / Fuel oil EL1

DVGW-Registration
Seawater < 25°C
neutral gases3

Water-glycol
Natural gas

Thermal oil
Petroleum

Fuel oil S2
Ammonia

Methane
Oxygen
Biogas
Body- Catalogue

Steam
Petrol
Figure No. Nominal diameter Nominal pressure Material Register Technical rules

Air
Stop valves with gland seal
BR 405 12. 405 DN 15 - 250 PN 16 EN-JL1040 B7 ✔
22./23. DN 15 - 400 PN 16 - 25 EN-JS1049 B7 ✔
34./35. DN 15 - 500 PN 25 - 40 1.0619+N B7 ✔
55. DN 15 - 250 PN 25 - 40 1.4408 B7 ✔
STOBU® 48. 006, 005 DN 10 - 50 PN 63 - 160 1.0460 B2 ✔ -- DIN 3230 T5/T6 / DIN EN 12266
88. DN 10 - 50 PN 63 - 160 1.7335 Technical conditions of delivery for valves
B2 ✔
-- AD2000-A4
Bodies from equipment

Stop valves with bellows seal

BR 460 12. 460 DN 15 - 250 PN 16 EN-JL1040 B7 ✔ -- TA Luft
Technical rules for clean air (with actuator DP)
22./23. DN 15 - 400 PN 16 - 25 EN-JS1049 B7 ✔
34./35. DN 15 - 500 PN 25 - 40 1.0619+N B7 ✔
55. DN 15 - 250 PN 25 - 40 1.4408 B7 ✔
Automated stop valves

FABA®Supra I 34./35. 146, 140, 166, 147 DN 15 - 150 PN 25 - 40 1.0619+N B1 ✔ -- DIN EN 14141
Stop valves for gas above PN16
44./45. 146, 140 DN 15 - 50 PN 25 - 40 1.0460 B1 ✔ -- DIN 3230 T5/T6 / DIN EN 12266
Technical conditions of delivery for valves
54./55. 146, 169, 166 DN 15 - 150 PN 25 - 40 1.4408 B1 ✔ -- AD2000-A4
Bodies from equipment
32./35. 141 DN 15 - 150 ANSI 150 - 300 SA216WCB B1
45. 149 DN 15 - 50 ANSI 300 SA105 B1
FABA®Supra C 34./35. 146, 140, 166, 147 DN 15 - 150 PN 25 - 40 1.0619+N B1 ✔ -- DIN EN 14141
Stop valves for gas above PN16
44./45. 146, 140 DN 15 - 50 PN 25 - 40 1.0460 B1 ✔ -- DIN 3230 T5/T6 / DIN EN 12266
Technical conditions of delivery for valves
54./55. 146, 169, 166 DN 15 - 150 PN 25 - 40 1.4408 B1 ✔ -- AD2000-A4
Bodies from equipment
32./35. 141 DN 15 - 150 ANSI 150 - 300 SA216WCB B1
45. 149 DN 15 - 50 ANSI 300 SA105 B1

Process valves
STEVI®AS 52. 350 DN 15 - 50 PN 16 1.4408 B8 ✔
72. DN 15 - 50 PN 16 CC491K B8 ✔

Blow down valves

STEVI®BBD 35. 415 DN 25 - 50 PN 40 1.0619+N B9 ✔

A1 DIN/EN A1 ANSI applicable / please contact the manufacturer / 1 extra light / 2 heavy / 3 f. ex. nitrogen

10 Technical data of the valves refer to the corresponding data sheet. Information / restriction of technical rules need to be obseerved! Resistance and fitness must be verified (contact manufacturer for information, Resistance list with detailed flow media specifications can be found on www.ari-armaturen.com). 11
The engineer, designing a system or a plant, is responsible for the selection of the correct valve. Edition 08/13 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com!
ARI-Product overview
Flow media / Tests and certifications

Selection of possible flow media Tests / Certifications

isolation Fluid group 1 Fluid group 2

Press. equip. directive 97/23/EG

Water (low in oxygen)
Water, demineralized
Diesel / Fuel oil EL1

DVGW-Registration
Seawater < 25°C
neutral gases3

Water-glycol
Natural gas

Thermal oil
Petroleum

Fuel oil S2
Ammonia

Methane
Oxygen
Biogas
Body- Catalogue

Steam
Petrol
Figure No. Nominal diameter Nominal pressure Material Register Technical rules

Air
Butterfly valves
ZIVA®-Z 20./21./22. 014 DN 25 - 600 PN 6 - 16 EN-JS1030 B6 ✔ ✔ -- DIN EN 1074-1/-2 / DIN EN 13774
NG-4313BQ0462 Stop valves for gas and water PN 4 up to PN16
NW-6201BQ0460
DIN DVGW Reg.
stop valves
Automated

ZIVA®-G 21./22. 015 DN 25 - 600 PN 10 - 16 EN-JS1030 B6 ✔ ✔

NG-4313BQ0462
NW-6201BQ0460
DIN DVGW Reg.
ZETRIX® 32./34./35. 016 DN 150 - 600 PN 10 - 40 1.0619+N B6 ✔
32./35. 016....90 NPS 6“ - 24“ ANSI 150 - 300 SA216WCB B3
51./52. 016 DN 150 - 600 PN 10 - 40 1.4408 B6 ✔
/54./55.
52./55. 016....90 NPS 6“ - 24“ ANSI 150 - 300 SA351CF8M B3

Check valves
CHECKO® V 10./12. 003/303, 004/304 DN 15 - 300 PN 6 - 16 EN-JL1040 B11 ✔ -- TA Luft
Technical rules for clean air
22./23. 003/303, 004/304 DN 15 - 350 PN 16 - 25 EN-JS1049 B11 ✔
34./35. 003/303, 004/304, DN 15 - 500 PN 25 - 40 1.0619+N B11 ✔
030, 063
45. 003, 030 DN 15 - 50 PN 40 1.0460 B11 ✔
46./48. 003 DN 10 - 50 PN 63 - 160 1.0460 B11 ✔
52./55. 003, 039 DN 15 - 200 PN 16 - 40 1.4408 B11 ✔
Other valves

86./88. 003 DN 10 - 50 PN 63 - 160 1.7335 B11 ✔

CHECKO® D 55. 001 DN 15 - 250 PN 16 - 40 1.4408 B11 ✔

Strainer
Strainer 10./12. 050 DN 15 - 300 PN 6 - 16 EN-JL1040 B12 ✔
22./23. 050 DN 15 - 300 PN 16 - 25 EN-JS1049 B12 ✔
34./35. 050, 080 DN 15 - 200 PN 25 - 40 1.0619+N B12 ✔
46./48. 050, 080 DN 10 - 50 PN 63 - 160 1.0460 B12 ✔
52./55. 059 DN 15 - 200 PN 16 - 40 1.4408 B12 ✔
86./88. 050, 080 DN 10 - 50 PN 63 - 160 1.7335 B12 ✔

A1 DIN/EN A1 ANSI applicable / please contact the manufacturer / 1 extra light / 2 heavy / 3 f. ex. nitrogen

12 Technical data of the valves refer to the corresponding data sheet. Information / restriction of technical rules need to be obseerved! Resistance and fitness must be verified (contact manufacturer for information, Resistance list with detailed flow media specifications can be found on www.ari-armaturen.com). 13
The engineer, designing a system or a plant, is responsible for the selection of the correct valve. Edition 08/13 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com!
ARI-Product overview
Flow media / Tests and certifications

Selection of possible flow media Tests / Certifications

SAFETY Fluid group 1 Fluid group 2

Press. equip. directive 97/23/EG

Water (low in oxygen)
Water, demineralized
Diesel / Fuel oil EL1

DVGW-Registration
Seawater < 25°C
neutral gases3

Water-glycol
Natural gas

Thermal oil
Petroleum

Fuel oil S2
Ammonia

Methane
Oxygen
Biogas
Body- Catalogue

Steam
Petrol
Figure No. Nominal diameter Nominal pressure Material Register Technical rules

Air
Safety valves
SAFE 12. 901 / 902 / 911 DN 20 - 150 PN 16 EN-JL1040 C1 ✔ -- DIN EN ISO 4126-1
(Full lift/standard) / 912 Safety devices for protection against excessive pressure
Safety valves
TÜV · SV · . .
-663 · D/G/F -- AD2000-A2 Safety appliances against excess pressure
Safety valves
25. DN 20 - 250 PN 40 EN-JS1049 C1 ✔ -- AD2000-A4 Bodies from equipment
-- TRD 421 (not for TCP/TCS)
Safety appliances against excess pressure
Safety valves for steam boilers group IV
35. DN 15 - 250 PN 40 1.0619+N C1 ✔ -- TRD 721 (not for TCP/TCS)
Safety appliances against excess pressure
Safety valves for steam boilers group II
-- VdTÜV-leaflet safety valve 100
Rules for type-testing of safety appliances against excess pressure
55. 901 / 911 DN 15 - 150 PN 40 1.4408 C1 ✔ -- TA Luft
Technical rules for clean air
-- VdTÜV-leaflet 1000
List of type-test valves
SAFE-SN 32./35. 901....90 / 902....90 NPS 1” - 6” ANSI 150 - 300 SA216WCB C1 -- Type approved according to
Semi Nozzle / 911....90 / 912....90 ASME Code Section VIII-Division 1.
ASME Sec. VIII
SAFE-SN 32./35. 901....90 / 902....90 NPS 1” - 6” ANSI 150 - 300 SA216WCB C1 -- Type approved according to
Semi Nozzle / 911....90 / 912....90 DIN EN ISO 4126-1 / TRD 421 / AD2000-A2
(Full lift/standard)
SAFE-P 12. 921 / 922 / 923 DN 20 - 100 PN 16 EN-JL1040 C1 ✔ -- DIN EN ISO 4126-1
(Standard) / 924 Safety devices for protection against excessive pressure
Safety valves
Safety valves

TÜV · SV · . .
25. DN 125 - 150 PN 40 EN-JS1049 C1 ✔ -- AD2000-A2
-811 · D/G/F
Safety appliances against excess pressure
Safety valves
35. DN 15 - 150 PN 40 1.0619+N C1 ✔ -- AD2000-A4
Bodies from equipment
55. 921 / 923 DN 15 - 100 PN 40 1.4408 C1 ✔ -- TRD 421 (not for TCP/TCS)
Safety appliances against excess pressure
Safety valves for steam boilers group IV
SAFE-TC 25. 941 / 942 / 943 DN 15 - 25 PN 40 EN-JS1049 C1 ✔ -- TRD 721 (not for TCP/TCS)
(Full lift/standard) Safety appliances against excess pressure
TÜV · SV · . . Safety valves for steam boilers group II
55. 941 / 943 DN 15 - 25 PN 40 1.4408 C1 ✔
-995 · D/G/F -- VdTÜV-leaflet safety valve 100
Rules for type-testing of safety appliances against excess pressure
SAFE-TCP, 67. 961 / 962 / 963, DN 15 - 25 PN 100 1.4581 / C1 ✔ -- TA Luft
SAFE-TCS 951 / 952 / 953 EN-JS1049 Technical rules for clean air
(Standard) -- VdTÜV-leaflet 1000
TÜV · SV · . . 57. 961 / 963 DN 15 - 25 PN 100 1.4581 / C1 ✔ List of type-test valves
-1041 · D/G/F EN-JS1049

ARI-REYCO 32./35./37./ 971 / 973 / 974 NPS 1” - 8” ANSI 150 - 2500 SA216WCC C1 -- ASME Code Section VIII-Division 1.
R Series 38./39./3c./ -- UV-stamp NB-stamp
Full Nozzle -- API 526
ASME Sec. VIII 32./35./37./ 971 / 973 / 974 NPS 1” - 8” ANSI 150 - 2500 SA217WC6 C1
38./39./3c./

52./55./57./ 971 / 973 NPS 1” - 8” ANSI 150 - 2500 SA351CF8M C1

58./59./5c./

ARI-REYCO 32./35./37./ 966 / 968 / 969 NPS 1/2” - 2” ANSI 150 - 2500 SA216WCC C1 -- ASME Code Section VIII-Division 1.
RL Series 38./39./3c./ -- UV-stamp NB-stamp
Full Nozzle
ASME Sec. VIII 52./55./57./ 966 / 968 NPS 1/2” - 2” ANSI 150 - 2500 SA351CF8M C1
58./59./5c./

A1 DIN/EN A1 ANSI applicable / please contact the manufacturer / 1 extra light / 2 heavy / 3 f. ex. nitrogen

14 Technical data of the valves refer to the corresponding data sheet. Information / restriction of technical rules need to be obseerved! Resistance and fitness must be verified (contact manufacturer for information, Resistance list with detailed flow media specifications can be found on www.ari-armaturen.com). 15
The engineer, designing a system or a plant, is responsible for the selection of the correct valve. Edition 08/13 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com!
ARI-Product overview
Flow media / Tests and certifications

Selection of possible flow media Tests / Certifications

STEAM Fluid group 1 Fluid group 2

Press. equip. directive 97/23/EG

TRAPPING

Water (low in oxygen)

Water, demineralized
Diesel / Fuel oil EL1

DVGW-Registration
Seawater < 25°C
neutral gases3

Water-glycol
Natural gas

Thermal oil
Petroleum

Fuel oil S2
Ammonia

Methane
Oxygen
Biogas
Body- Catalogue

Steam
Petrol
Figure No. Nominal diameter Nominal pressure Material Register Technical rules

Air
Bimetallic steam traps
CONA®B 12. 600 DN 25 - 50 PN 16 EN-JL1040 D1 ✔ -- DIN EN 12266 Technical conditions of delivery for valves
45. 600, 601 DN 15 - 50 PN 40 1.0460 D1 ✔ -- AD2000 Technical rules

55. DN 15 - 50 PN 40 Stainless steel D1 ✔

85. DN 15 - 50 PN 40 High temp. steel D1 ✔
CONA®B 86. 600 DN 15 - 50 PN 63 High temp. steel D1 ✔
High pressure
87. DN 15 - 25 PN 100 High temp. steel D1 ✔
88. DN 15 - 25 PN 160 High temp. steel D1 ✔
89. DN 15 - 25 PN 250 High temp. steel D1 ✔
8a. DN 15 / 25 PN 320 High temp. steel D1 ✔
8b. DN 15 / 25 PN 400 High temp. steel D1 ✔
8c. DN 15 / 25 PN 630 High temp. steel D1 ✔
CONA B®
42./45. 600, 601 NPS 1/2“ - 2“ ANSI 150 - 300 SA105 D1 -- ASME B16.34
52./55. NPS 1/2“ - 2“ ANSI 150 - 300 SA182 F321 D1 -- API 598

CONA®B 47. 600 NPS 1/2“ - 1“ ANSI 600 SA105 D1

High pressure
86. NPS 1/2“ - 1“ ANSI 400 SA182F12Cl.2 D1
87. NPS 1/2“ - 1“ ANSI 600 SA182F12Cl.2 D1
88. NPS 1/2“ - 1“ ANSI 900 SA182F12Cl.2 D1
89. NPS 1/2“ - 1“ ANSI 1500 SA182F22Cl.3 D1
Steam traps

8c. NPS 1/2“ - 1“ ANSI 2500 SA182F22Cl.3 D1

8c. NPS 1/2“ - 1“ ANSI 2500 SA182F91 D1

Thermostatic steam traps

CONA®M 12. 610 DN 15 - 25 PN 16 EN-JL1040 D2 ✔ -- DIN EN 12266 Technical conditions of delivery for valves
45. 610, 611, DN 15 - 25 PN 40 1.0460 D2 ✔ -- AD2000 Technical rules
612, 613
55. DN 15 - 25 PN 40 Stainless steel D2 ✔
85. DN 15 - 25 PN 40 High temp. steel D2 ✔
45. 616 DN 25 - 50 PN 40 1.0460 D2 ✔
52./55. 614, 615, 619 DN 15 - 25 PN 16 / 40 Stainless steel D2 ✔
NPS 1/4“ - 1“
42./45. 610, 611, NPS 1/2“ - 1“ ANSI 150 - 300 SA105 D2 -- ASME B16.34
612, 613 -- API 598
52./55. NPS 1/2“ - 1“ ANSI 150 - 300 SA182 F321 D2
42./45. 616 NPS 1“ - 2“ ANSI 150 - 300 SA105 D2

Thermodynamic steam traps

CONA®TD 45. 640, 641 DN 15 - 25 PN 40 1.0460 D4 ✔ -- DIN EN 12266 Technical conditions of delivery for valves
85./86. DN 15 - 25 PN 40 - 63 High temp. steel D4 ✔ -- AD2000 Technical rules

55./56. DN 15 - 25 PN 40 Stainless steel D4 ✔

NPS 3/8“ - 1“
42./45. NPS 1/2“ - 2“ ANSI 150 - 300 SA105 D4 -- ASME B16.34
52./55. NPS 1/2“ - 2“ ANSI 150 - 300 SA182 F321 D4 -- API 598

56. 641 NPS 3/8“ - 3/4“ ANSI 400 A743CA40 D4

56. NPS 1“ ANSI 400 SA182F6A D4

A1 DIN/EN A1 ANSI applicable / please contact the manufacturer / 1 extra light / 2 heavy / 3 f. ex. nitrogen

16 Technical data of the valves refer to the corresponding data sheet. Information / restriction of technical rules need to be obseerved! Resistance and fitness must be verified (contact manufacturer for information, Resistance list with detailed flow media specifications can be found on www.ari-armaturen.com). 17
The engineer, designing a system or a plant, is responsible for the selection of the correct valve. Edition 08/13 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com!
ARI-Product overview
Flow media / Tests and certifications

Selection of possible flow media Tests / Certifications

STEAM Fluid group 1 Fluid group 2

Press. equip. directive 97/23/EG

TRAPPING

Water (low in oxygen)

Water, demineralized
Diesel / Fuel oil EL1

DVGW-Registration
Seawater < 25°C
neutral gases3

Water-glycol
Natural gas

Thermal oil
Petroleum

Fuel oil S2
Ammonia

Methane
Oxygen
Biogas
Body- Catalogue

Steam
Petrol
Figure No. Nominal diameter Nominal pressure Material Register Technical rules

Air
Ball float steam traps
CONA®S 12. 631 DN 15 - 50 PN 16 EN-JL1040 D3 ✔ -- DIN EN 12266 Technical conditions of delivery for valves
25. DN 15 - 50 PN 40 EN-JS1049 D3 ✔ -- AD2000 Technical rules

45. DN 15 - 50 (100) PN 40 1.0460 D3 ✔

55. DN 15 - 50 PN 40 Stainless steel D3 ✔
86./87./ 88. 631, 632 DN 15 - 50 PN 63 - 160 High temp. steel D3 ✔
85. 637, 638 DN 50 - 100 PN 40 High temp. steel D3 ✔
45. 633 DN 40 - 100 PN 40 1.0460 D3 ✔
42./45. 639 DN 50 - 100 PN 16 / 40 1.0460 D3 ✔
55. DN 50 - 100 PN 40 Stainless steel D3 ✔
12. 630 DN 15 - 50 PN 16 EN-JL1040 D3 ✔
25. DN 15 - 50 PN 40 EN-JS1049 D3 ✔
45. DN 15 - 100 PN 40 1.0460 D3 ✔
55. DN 15 - 50 PN 40 Stainless steel D3 ✔
11. 631 NPS 1/2“ - 2“ ANSI 125 EN-JL1040 (cf. D3 -- ASME B16.34
ASTM A 126 Cl. B) -- API 598
22. NPS 1/2“ - 2“ ANSI 150 EN-JS1049 D3
(cf. A395)
42./45. NPS 1/2“ - 4“ ANSI 150 - 300 SA105 D3
52./55. NPS 1/2“ - 4“ ANSI 150 - 300 SA182F321 D3
Steam traps

88. 631, 632 NPS 1/2“ - 2“ ANSI 900 SA182F12Cl.2 D3

42./45. 633 NPS 1 1/2“ - 4“ ANSI 150 - 300 SA105 D3
41./42./45. 639 NPS 1 1/2“ - 4“ ANSI 125 - 300 SA105 D3
52./55. NPS 1 1/2“ - 4“ ANSI 125 - 300 SA182F321 D3
11. 630 NPS 1/2“ - 2“ ANSI 125 EN-JL1040 (cf. D3
ASTM A 126 Cl. B)
22. NPS 1/2“ - 2“ ANSI 150 EN-JS1049 D3
(cf. A395)
42./45. NPS 1/2“ - 4“ ANSI 150 - 300 SA105 D3
52./55. NPS 1/2“ - 4“ ANSI 150 - 300 SA182F321 D3
CONA®SC Plus 12. 635 DN 25 PN 16 EN-JL1040 D3 ✔ -- DIN EN 12266 Technical conditions of delivery for valves
25. DN 25 PN 40 EN-JS1049 D3 ✔ -- AD2000 Technical rules

45. DN 25 PN 40 1.0460 D3 ✔
55. DN 25 PN 40 Stainless steel D3 ✔
42./45. 635 NPS 1“ ANSI 150 - 300 SA105 D3 -- ASME B16.34 / API 598
CONA SC
®
42./44./45. 634 DN 15 - 25 PN 16 - 40 1.0460 D3 ✔ -- DIN EN 12266 Technical conditions of delivery for valves
54./55. DN 15 - 25 PN 25 - 40 Stainless steel D3 ✔ -- AD2000 Technical rules

42./44./45. 636 DN 15 - 25 PN 16 - 40 1.0460 D3 ✔

54./55. DN 15 - 25 PN 25 - 40 Stainless steel D3 ✔
52. 629 NPS 1/2“ PN 16 Stainless steel D3 ✔
42./45. 634 NPS 1/2“ - 1“ ANSI 150 - 300 SA105 D3 -- ASME B16.34
52./55. NPS 1/2“ - 1“ ANSI 150 - 300 SA182F321 D3 -- API 598

42./45. 636 NPS 1/2“ - 1“ ANSI 150 - 300 SA105 D3

52./55. NPS 1/2“ - 1“ ANSI 150 - 300 SA182F321 D3

A1 DIN/EN A1 ANSI applicable / please contact the manufacturer / 1 extra light / 2 heavy / 3 f. ex. nitrogen

18 Technical data of the valves refer to the corresponding data sheet. Information / restriction of technical rules need to be obseerved! Resistance and fitness must be verified (contact manufacturer for information, Resistance list with detailed flow media specifications can be found on www.ari-armaturen.com). 19
The engineer, designing a system or a plant, is responsible for the selection of the correct valve. Edition 08/13 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com!
ARI-Product overview
Flow media / Tests and certifications

Selection of possible flow media Tests / Certifications

STEAM Fluid group 1 Fluid group 2

Press. equip. directive 97/23/EG

TRAPPING

Water (low in oxygen)

Water, demineralized
Diesel / Fuel oil EL1

DVGW-Registration
Seawater < 25°C
neutral gases3

Water-glycol
Natural gas

Thermal oil
Petroleum

Fuel oil S2
Ammonia

Methane
Oxygen
Biogas
Body- Catalogue

Steam
Petrol
Figure No. Nominal diameter Nominal pressure Material Register Technical rules

Air
Steam traps with system connectors
CONA® 55. 604, 622, 628, NPS 3/8“ ANSI 300 Stainless steel D5 ✔ -- ASME B16.34
Universal 642, 643 -- API 598
Connector 55. 681, 682, 683, 684 NPS 1/2“ - 1“ ANSI 300 Stainless steel D5 ✔
Steam traps

Steam traps with stop function at inlet and outlet

CONA®All-in-one 45. 60A, 61A, 64A, DN 15 - 25 PN 40 1.0460 D5 ✔
63A
55. DN 15 - 25 PN 40 Stainless steel D5 ✔
42./45. 60A, 61A, 64A, NPS 1/2“ - 1“ ANSI 150 - 300 SA105 D5
63A
52./55. NPS 1/2“ - 1“ ANSI 150 - 300 SA182F321 D5

CONA® Components
Liquid drainer 12. 665 DN 15 - 25 PN 16 EN-JL1040 D6 ✔
45. DN 15 - 25 PN 40 1.0460 D6 ✔
42./45. 665 NPS 1/2“ - 1“ ANSI 150 - 300 SA105 D6
Condensate 45. 645, 647 DN 15 - 25 PN 40 1.0460 D6 ✔
discharge
temperature limiter 42./45. 645, 647 NPS 1/2“ - 1“ ANSI 150 - 300 SA105 D6
Components

Liquid return 45. 650 DN 15 - 50 PN 40 1.0460 D6 ✔

temperature limiter
42./45. 650 NPS 1/2“ - 2“ ANSI 150 - 300 SA105 D6

Vacuum breaker 52./55. 655 DN 15 PN 16 / 40 Stainless steel D6 ✔

Automatic air vents 22. 656 DN 15 PN 16 EN-JS1049 D6 ✔

for liquid systems
34./35. DN 15 - 25 PN 25 - 40 Cast steel D6 ✔
54./55. DN 15 - 25 PN 25 - 40 Stainless steel D6 ✔
32./35. 656 NPS 1/2“ - 1“ ANSI 150 - 300 SA216WCB D6
52./55. NPS 1/2“ - 1“ ANSI 150 - 300 SA351CF8 D6
Steam injector 54. 651 DN 15 / 25 / 40 PN 25 Stainless steel D6 ✔

CONA® Accessories
Accesso-

Double window sight 12. 660 DN 15 - 100 PN 16 EN-JL1040 D7 ✔

ries

glasses
32./35. DN 15 - 100 PN 16 / 40 Cast steel D7 ✔
52./55. DN 15 - 100 PN 16 / 40 Stainless steel D7 ✔

A1 DIN/EN A1 ANSI applicable / please contact the manufacturer / 1 extra light / 2 heavy / 3 f. ex. nitrogen

20 Technical data of the valves refer to the corresponding data sheet. Information / restriction of technical rules need to be obseerved! Resistance and fitness must be verified (contact manufacturer for information, Resistance list with detailed flow media specifications can be found on www.ari-armaturen.com). 21
The engineer, designing a system or a plant, is responsible for the selection of the correct valve. Edition 08/13 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com!
ARI-Product overview
Flow media / Tests and certifications

Selection of possible flow media Tests / Certifications

STEAM Fluid group 1 Fluid group 2

Press. equip. directive 97/23/EG

TRAPPING

Water (low in oxygen)

Water, demineralized
Diesel / Fuel oil EL1

DVGW-Registration
Seawater < 25°C
neutral gases3

Water-glycol
Natural gas

Thermal oil
Petroleum

Fuel oil S2
Ammonia

Methane
Oxygen
Biogas
Body- Catalogue

Steam
Petrol
Figure No. Nominal diameter Nominal pressure Material Register Technical rules

Air
Monitoring system for steam traps
CONA®-control 45. 685 DN 15 - 50 PN 40 1.0460 D7 ✔
55. DN 15 - 50 PN 40 Stainless steel D7 ✔
42./45. 685 NPS 1/2“ - 2“ ANSI 150 - 300 SA105 D7
52./55. NPS 1/2“ - 2“ ANSI 150 - 300 SA182F321 D7

Condensate collection / steam distribution

Accessories

CODI®S 45./46. 671, 672 DN 25 - 50 PN 40 - 63 1.0460 D8 ✔ -- DIN EN 12266 Technical conditions of delivery for valves
-- AD2000 Technical rules
55. DN 25 - 50 PN 40 1.0460 D8 ✔ -- TA Luft (CODI B)
Technical rules for clean air
42./45. NPS 1“ - 2“ ANSI 150 - 300 SA105 D8
52./55. NPS 1“ - 2“ ANSI 150 - 300 SA182F321 D8
CODI B
®
45./46. 675, 676 DN 25 - 50 PN 40 - 63 1.0460 D8 ✔ -- DIN EN 12266 Technical conditions of delivery for valves
-- AD2000 Technical rules
55. DN 25 - 50 PN 40 1.0460 D8 ✔ -- TA Luft (CODI B)
Technical rules for clean air
42./45. NPS 1“ - 2“ ANSI 150 - 300 SA105 D8
52./55. NPS 1“ - 2“ ANSI 150 - 300 SA182F321 D8

A1 DIN/EN A1 ANSI applicable / please contact the manufacturer / 1 extra light / 2 heavy / 3 f. ex. nitrogen

22 Technical data of the valves refer to the corresponding data sheet. Information / restriction of technical rules need to be obseerved! Resistance and fitness must be verified (contact manufacturer for information, Resistance list with detailed flow media specifications can be found on www.ari-armaturen.com). 23
The engineer, designing a system or a plant, is responsible for the selection of the correct valve. Edition 08/13 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com!
ARI-Product overview
Flow media / Tests and certifications

BUILDING
Selection of possible flow media Selection of pos. applications Tests / Certifications
(others on request) (others on request)

Press. equip. directive 97/23/EG

TechnOLOGY

Compressed air system

Cold water installations
Hot water up to 120°C

Swimming pool instal.

Swimming pool water

Low pressure steam

Heating installations
(HVAC)

Compressed air
Drinking water
Process water

Water-glycol
Body- Catalogue
Figure No. Nominal diameter Nominal pressure Material Register Technical rules

EURO-WEDI® 10./12. 070, 071, 072, 073 DN 15 - 200 PN 6 / 16 EN-JL1040 B3 ✔ -- DIN EN 1074-1/-2 / DIN EN 13774
Stop valves for gas and water PN 4 up to PN16
12. 076, 078 DN 15 - 50 PN 6 / 16 EN-JL1040 B3 ✔
-- DIN EN 14141
NPS 1/2“ - 2“ Stop valves for gas above PN16
-- DIN 3230 T5/T6 / DIN EN 12266
Technical conditions of delivery for valves
-- AD2000-A4
ASTRA® 12. 020 DN 15 -200 PN 16 EN-JL1040 B10 ✔ Bodies from equipment
-- DIN EN 15848-1

12. 042 DN 250 - 500 PN 16 EN-JL1040 B10 ✔

ASTRA-Plus® 22. 042 DN 15 - 500 PN 16 EN-JS1049 B10 ✔

ZESA® 20./21./22. 012 DN 25 - 500 PN 6 / 10 / 16 EN-JS1030 B6 ✔

Building technology

(only (only
NBR) NBR)

GESA® 21./22. 013 DN 25 - 500 PN 10 / 16 EN-JS1030 B6 ✔

(only (only
NBR) NBR)

ZESA®EA 20./21./22. 012 DN 25 - 200 PN 6 / 10 / 16 EN-JS1030 B6 ✔

(only (only
NBR) NBR)

GESA®EA 21./22. 013 DN 25 - 200 PN 10 / 16 EN-JS1030 B6 ✔

(only (only
NBR) NBR)

ZESA®E 20./21./22. 012 DN 25 - 500 PN 6 / 10 / 16 EN-JS1030 B6 ✔

(only (only
NBR) NBR)

GESA®E 21./22. 013 DN 25 - 500 PN 10 / 16 EN-JS1030 B6 ✔

(only (only
NBR) NBR)

FABA®Plus 12. 046 DN 15 - 300 PN 16 EN-JL1040 B1 ✔

22./23. 046 DN 15 - 350 PN 16 / 25 EN-JS1049 B1 ✔

A1 DIN/EN A1 ANSI applicable / please contact the manufacturer

24 Technical data of the valves refer to the corresponding data sheet. Information / restriction of technical rules need to be obseerved! Resistance and fitness must be verified (contact manufacturer for information, Resistance list with detailed flow media specifications can be found on www.ari-armaturen.de). 25
The engineer, designing a system or a plant, is responsible for the selection of the correct valve. Edition 08/13 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com!
ARI-Product overview
Flow media / Tests and certifications

BUILDING
Selection of possible flow media Selection of pos. applications Tests / Certifications
(others on request) (others on request)

Press. equip. directive 97/23/EG

TECHNOLOGY

Compressed air system

Cold water installations
Hot water up to 120°C

Swimming pool instal.

Swimming pool water

Low pressure steam

Heating installations
(HVAC)

Compressed air
Drinking water
Process water

Water-glycol
Body- Catalogue
Figure No. Nominal diameter Nominal pressure Material Register Technical rules

CHECKO® V 10./12. 003 DN 15 - 300 PN 6 / 16 EN-JL1040 B11 ✔ -- DIN EN 12828

Heating systems in buildings - Design for water-based
heating systems
22./23. 003 DN 15 - 350 PN 16 / 25 EN-JS1049 B11 ✔ -- DIN EN ISO 4126-1
Safety devices for protection against excessive pressure -
Safety valves
Strainer 10./12. 050 DN 15 - 300 PN 6 / 16 EN-JL1040 B12 ✔ -- AD2000-A2
Safety appliances against excess pressure -
Safety valves
-- AD2000-A4
22./23. 050 DN 15 - 300 PN 16 / 25 EN-JS1049 B12 ✔ Bodies from equipment
-- TRD 421
Safety appliances against excess pressure -
SAFE 12. 903 DN 20 - 150 PN 16 EN-JL1040 C1 ✔ safety valves for steam boilers group IV
Safety valve
for heating -- TRD 721
Safety appliances against excess pressure -
TÜV · SV · . . safety valves for steam boilers group II
-688 · D/G/H
-- VdTÜV-leaflet safety valve 100
SAFE 12. 904 DN 20 - 150 PN 16 EN-JL1040 C1 ✔ Rules for type-testing of
Low pressure steam- safety appliances against excess pressure
safety valve
-- TA - Luft
TÜV · SV · . . Technical rules for clean air
-688 · D
-- VdTÜV-leaflet 1000
SAFE-TC 25. 945 DN15 - 25 PN 40 EN-JS1049 C1 ✔ List of type-test valves
Safety valve NPS 1/2“ - 1“
for heating
Building technology

SAFE-TC 25. 946 DN15 - 25 PN 40 EN-JS1049 C1 ✔

Low pressure steam- NPS 1/2“ - 1“
safety valve

SAFE 12. 901 DN 15 -150 PN 16 EN-JL1040 C1 ✔

(Full lift/Standard)
TÜV · SV · . .
-663 · D/G/F

SAFE-P 12. 921 DN 15 -100 PN 16 EN-JL1040 C1 ✔

(Standard)
TÜV · SV · . .
-811 · D/G/F

SAFE-TCP, 67. 961, DN 15 - 25 PN 100 1.4581 / C1 ✔

SAFE-TCS 951 EN-JS1049
(Standard)
TÜV · SV · . .
-1041 · D/G/F

STEVI®--H 10./12./72.. 485, 486, 487, 488 DN 15 -50 PN 6 / 16 EN-JL1040 A3 ✔

NPS 1/2“ - 2“ CC499K

A1 DIN/EN A1 ANSI applicable / please contact the manufacturer

26 Technical data of the valves refer to the corresponding data sheet. Information / restriction of technical rules need to be obseerved! Resistance and fitness must be verified (contact manufacturer for information, Resistance list with detailed flow media specifications can be found on www.ari-armaturen.com). 27
The engineer, designing a system or a plant, is responsible for the selection of the correct valve. Edition 08/13 - Data subject to alteration - Regularly updated data on www.ari-armaturen.com!
ARI-Product overview
Flow media / Tests and Certifications

Overview of our certificates from inspection or classification associations

and Technical Inspection Associations

Approvals
Pressure equipment directive PED 97/23/EG ●● Module H, H1, B+D
LRQA-Lloyd`s Register Quality Assurance ●● Certificate-No. 0912458
DIN EN ISO 9001
BV - Bureau Veritas Mode II Survey according to DIN EN ISO 9001 (France) ●● Company classification No. SMS II/ESN/481/1.C.O.
single acceptances by BV-agent
DNV - Det Norske Veritas according to DIN EN ISO 9001 (Norway) ●● Company classification MSA No. R-1824
for self-proved acceptance and certification
GL - German Lloyd according to DIN EN ISO 9001 ●● Company classification No. GL-EP 54618-90 HH
for self-proved acceptance and certification
LROS (LR) - Lloyd`s Register of Shipping - Rules Part 5 ●● Company classification QAM 034 for self-proved acceptance and certification
SELO (SQLO) China Licence (China) ●● Company classification No. 02300T for self-proved acceptance and
certification (only safety valves)
CCS - China Classification Society ●● Company classification No. HBT 04171026 for self-proved acceptance and
certification
ASME Code Section VIII-Division 1 (UV-stamp) ●● Company classification No. 32,885 (only safety valves)
Canada Registration ●● Type classification (safety valves with UV-stamp)
GOST-R (Russia) ●● Company classification for self-proved acceptance
RMROS (RS) - Russian Maritime Register of Shipping (Russia) ●● Company classification No. 05.07028.250 for self-proved acceptance and
certification
Promatomnadzor (Rep. of Belarus) ●● Company classification for self-proved acceptance No. 15-86-2006
Prombezpeka (Ukraine) ●● Company classification for self-proved acceptance
Rostechnadzor (Gosgortechnadsor) (Russia) ●● Company classification for self-proved acceptance
TÜV - Technical Inspection Association according to DIN EN 10204 - 3.1 ●● Classification for acceptance and certification by ARI - expert
QS-System = TRB 801 Nr. 45
TÜV - Technical Inspection Association ●● Welding licence AD-leaflet HP 0 from 26.03.92
for full automatic welding (AWH)
●● Acceptance of welding procedures

Single approvals
Arbejdstilsynet - Danish Working Environment Authority ●● Single approvals
ABS - American Bureau of Shipping according to DIN EN ISO 9001 ●● Single acceptance by ABS-agent
AIB Vincotte (Belgium) ●● Single approvals
IBR - Indien Boiler Regulations ●● Single approvals
ISPESL (Italy) ●● Single approvals
RINA (Italy) ●● Single acceptance by GL-agent
Stoomwezen (The Netherlands) ●● Dimension sheet and TÜV-setting certificate for safety valves
NK (Japan) ●● Single approvals
UDT - URZAD DOZORU TECHNICZNEGO (Poland) ●● Single acceptance and certification (only safety valves)
TSU (Slowakei) ●● Single approvals
DIN EN 10204 - 3.1 and 3.2 ●● Single acceptance by independent expert
DIN EN 10204 - 3.2 (PED 97/23/EG, Module G) ●● Single acceptance by independent expert

Further approvals
on request

Technology for the future.

GERMAN QUALITY VALVES
ARI-Armaturen Albert Richter GmbH & Co. KG, D-33756 Schloß Holte-Stukenbrock,
Tel. +49 (0)5207 / 994-0, Telefax +49 (0)5207 / 994-158 or 159 Internet: http://www.ari-armaturen.com E-mail: [email protected]

28 Edition 08/13 - Data subject to alteration

Regularly updated data on www.ari-armaturen.com!