D4 Series2018

Programmable Logic Controller
D4 Series
PLC
HMI
Features
SENSOR
ENCODER
Medium-scale Module Type
- Koyo Electronics' best series that packages higher
COUNTER performance and is worth more than the price
- Four kinds of CPU are available.
INFORMATION
- Module addition: up to 8-slot
- Maximum I/O points: 2,048 points
- Program memory: 31.5 K/
Data memory: 15.3 K
Common - Communication port: 4 port
Subject Matter
- PID control: Up to 16 built-in loops
SJ-ETHER/SJ
DL05/06 ■Features
The D4 series packages performance that is worth more than the price and PID Supported
DL205
size. Among Koyo Electronics' PLCs, the D4 series makes the widest range Most commercially available PLCs are inconvenient because they are not
of input-output modules and input/output configurations available. equipped with ramp / soak, alarm, and loop schedule setting functions, and
D4
ladder programs must be separately created by PID loop. Meanwhile, the D4-
Equipment 454 CPU is easy to operate because it has the following functions.
D3
The D4 series has four kinds of CPU from that which has a memory capacity - 16 PID loops that are configurable in tabular format
Programmer
of 3.5 K and 640 input/output points to that which has the memory capacity - Automatic setting of loop schedules
of 31.5 K and 2,048 input/output points. - Alarm and ramp / soak indicator chart
KPP
Moreover, the PLC models come in an AC type and the DC type according to - Programming software that has a built-in loop adjustment window for
power source specifications. performing trend analysis
DirectSOFT
The D4 series has flexible input/output and communication modules as - CPU's automatic setting of near-optimal loop by automatic tuning
shown below.
Terminator I/O
- DC/AC input, output module (DC: Up to 64 points) Industry's Top-class Input/Output Products are
- 10 A relay output Available.
- 12-bit and 16-bit analog input/output Generally, the input-output module accounts for a large share of the costs
- Thermocouple / Resistance thermometer bulb input required for a PLC system, but Koyo Electronics has great news for users.
- Serial and Ethernet module data communications Namely, the more input-output modules are equipped, the more the cost can
- High speed counter input and pulse output be reduced.
- Serial remote I/O master / slave module
- Ethernet remote I/O master / slave base unit controller
Inexpensive Analog Module
Koyo Electronics' F4-08AD analog input module is equipped with 8 channels
Feasible Systems
for analog input and offers seven ranges (4 to 20 mA, 0 to 20 mA, 0 to 5 V,
- Creation of a control system that has up 3,500 points of local / 0 to 10 V, 1 to 5 V, ±5 V and ±10 V) at low cost.
decentralized input-output Regarding the high-density analog module, select Koyo Electronics' F4-
Features - Execution of cost-effective process control using built-in PID instructions 16AD-1 module. This module is equipped with 16 channels for current input
and dedicated modules and is available at an extremely low price.
Specifications
The D4-454 is a Solution with the Best Balance of
Dimensions
Functions and Price.
CPU The D4-454 is equipped with memory and input/output that sufficiently
Specifications meet user needs. The D4-454 has a program capacity of 31.5 K as built-in
memory. Moreover, the D4-454 supports 2,048 input/output points that can
Special Module
be mounted to the CPU and expansion bases. If remote I/O is used, 1,536
Input/Output points can be added. Moreover, the D4-454 supports IEEE floating-point
Module arithmetic instructions and functions via four communication ports with the
use of three connectors equipped for communications. Also, the D4-454 can
Analog Module
communicate with operation display panels, Windows computer applications,
up to 7 remote I/O points, and other PLCs over a network.
Base Unit
The D4 series supports more than 200 kinds of instructions that can execute
Accessories/ drum sequence, ASCII output, floating-point arithmetic, trigonometrical
Connector function, bit operation in words (word bits), interruption routines triggered by
time / hardware, For/Next loop, direct input/output, and PID. The D4 series
also supports real-time clocks, calendars and history error logs.
226
KOYO ELECTRONICS INDUSTRIES CO., LTD.
Visit our website ▼
GENERAL CATALOG 2018 Latest catalog (free) is available online.
http://www.koyoele.co.jp/english/
D4 Series
PLC
HMI
Specifications
SENSOR
■Model Number List
Name Outline ENCODER
CPU Module *MC=Memory Cartridge
Power Source COUNTER
Model Number Functions Weight (g) Price
Type
Self-powered CPU
Module Memory 31.5 K (Built-in)/
D4-454 AC 730 Open INFORMATION
Maximum input/output 1,024 points Data Register 15.3 K
Memory 31.5 K (Built-in)/
D4-454-C DC 750 Open
Maximum input/output 1,024 points Data Register 15.3 K
Memory
Memory Cartridge
D4-EE-2 EEPROM 32 K electricity erasure type 38 Open Common
G-53M CMOS RAM 7.5K with high capacity capacitor 42 Open Subject Matter
Base Unit SJ-ETHER/SJ

Model Number Number of Slots Base Extension Functions Weight (g) Price
Base Unit D4-04B-1 4 Available 660 Open DL05/06
D4-06B-1 6 Available 830 Open
D4-08B-1 8 Available 990 Open DL205
Base Expansion Power Supply Unit
Power Source D4
Type
Local base expansion unit. D3
D4-EX AC 660 Open
The base expansion cable (D4-EXCBL-1 or D4-EXCBL-2) is required.
Base Expansion Local base expansion unit. Programmer
D4-EXDC DC 680 Open
The base expansion cable (D4-EXCBL-1 or D4-EXCBL-2) is required.
Base Expansion Cable KPP
D4-EXCBL-1 Cable length 1 m Open DirectSOFT
D4-EXCBL-2 Cable length 0.5 m Open
Input/Output Module Terminator I/O
Input Output
Model Number Weight (g) Price
Points Functions Points Functions
D4-08ND3S 8 24 to 48 V DC Sink/source 250 Open
D4-16ND2 16 12 to 24 V DC Source 250 Open
D4-16ND2F 16 12 to 24 V DC Source 250 Open
D4-32ND3-1 32 24 V DC Sink/source 190 Open
D4-64ND2 64 20 to 28 V DC Source 220 Open
D4-08NA 8 100 to 200 V AC 240 Open
D4-16NA 16 100 V AC 270 Open
12 to 24 V AC/12 to 24 V DC
D4-16NE3 16 250 Open
Sink/source
90 to 150 V AC/DC Features
Extension IO Module F4-08NE3S 8 256 Open
Sink/source
F4-08TD1S 8 24 to 150 V DC Sink 282 Open Specifications
D4-16TD1 16 5 to 24 V DC Sink 270 Open
D4-16TD2 16 12 to 24 V DC Source 280 Open Dimensions
D4-32TD1 32 5 to 24 V DC Sink 190 Open
D4-32TD2 32 12 to 24 V DC Source 190 Open CPU
D4-64TD1 64 5 to 24 V DC Sink 210 Open Specifications
D4-08TA 8 18 to 220 V AC 330 Open Special Module

D4-16TA 16 18 to 220 V AC 350 Open
D4-08TR 8 Relay 2 A 260 Open Input/Output
F4-08TRS-1 8 Relay 10 A 374 Open Module
F4-08TRS-2 8 Relay 5 A 380 Open Analog Module

D4-16TR 16 Relay 1 A 310 Open
Base Unit
Accessories/
Connector
227
The specifications and prices described in this catalog were valid when the catalog was issued.
GENERAL CATALOG 2018
For the latest information, contact our sales persons or see our website.
D4 Series
PLC
HMI
Specifications
SENSOR
ENCODER Name Outline

Analog Input/output Module
COUNTER Input Output
Model Number Weight (g) Price
Points Functions Points Functions
0 to 5 V/-5 V to +5 V/
INFORMATION
1 to 5 V/0 to 10 V/
F4-04AD 4 290 Open
-10 V to +10 V/
4 to 20 mA/0 to 20 mA
0 to 5 V/0 to 10 V/
1 to 5 V/-5 V to +5 V/
F4-04ADS 4 323 Open
-10 V to +10 V/
Common 0 to 20 mA/4 to 20 mA
Subject Matter 4 to 20 mA/1 to 5 V/
0 to 20 mA/0 to 5 V/
SJ-ETHER/SJ F4-08AD 8 290 Open
0 to 10 V/-5 V to +5 V/
-10 V to +10 V
DL05/06 F4-16AD-1 16 4 to 20 mA 329 Open
F4-16AD-2 16 0 to 5 V/0 to 10 V 326 Open
DL205 F4-04DA-1 4 4 to 20 mA 268 Open
0 to 5 V/0 to 10 V/
F4-04DA-2 4 271 Open
D4 -5 V to +5 V/-10 V to +10 V
Extension IO Module F4-08DA-1 8 4 to 20 mA 317 Open
D3 F4-08DA-2 8 0 to 5 V/0 to 10 V 370 Open
F4-16DA-1 16 4 to 20 mA 328 Open
Programmer F4-16DA-2 16 0 to 5 V/0 to 10 V 276 Open
F4-04DAS-1 4 4 to 20 mA Source 278 Open
KPP F4-04DAS-2 4 0 to 5 V/0 to 10 V 299 Open
F4-08THM 8 Thermocouple/Voltage 229 Open
DirectSOFT F4-08RTD 8 Resistance thermometer bulb 270 Open
Special Module
Terminator I/O Model Number Functions Weight (g) Price
D4-RM Serial remote I/O master 240 Open
D4-RS Remote I/O slave. Built-in 100/200 V power supply 760 Open
D4-RSDC Remote I/O slave. Built-in 24 V DC power supply 760 Open
H4-ERM100 Ethernet remote master 10/100 BASE-T/TX 179 Open
H4-ECOM100 Ethernet communication 10/100 BASE-T/TX 179 Open
D4-DCM Serial communication (2 ports) 265 Open
F4-16PID PID coprocessor module 208 Open
F4-4LTC 4-loop temperature controller 360 Open
H4-CTRIO High speed counter input/output 252 Open
Features
Specifications
Dimensions
CPU
Specifications
Special Module
Input/Output
Module
Analog Module
Base Unit
Accessories/
Connector
228
D4 Series
PLC
HMI
Specifications
SENSOR
Name Outline ENCODER

Accessories/Maintenance Product
Model Number Functions Weight (g) Price COUNTER
D4-FILL Dummy slot Open
Peripheral Device
INFORMATION
PC-DSOFT5 Programmer software for computer 657 Open
FA-ISOCON RS232 → RS422/RS485 converter 670 Open
U-30JP 3 m external 24 V DC power source connection cable for D4-64ND2, D4-64TD1 Open
U-30JH 3 m one-end loose wire cable for D4-64ND2, D4-64TD1 Open
Cable / Connector for program Common
Model Number Functions Weight (g) Price Subject Matter
Conversion connector cable between PLC port (modular) and S-15JP/S-30JG-T SJ-ETHER/SJ
S-15CNJ Open
(D-sub1 5-pin)
S-9CNS1 Conversion connector between DOS/V and Z-20JP Open DL05/06
Conversion connector between Z-20JP and D4 series programmer port
Associated Equipment S-15CNP1 Open
(D-sub 15-pin)
DL205
Conversion connector between Z-20JP and D4 series general-purpose port
S-25CNP1 Open
(D-sub 25-pin), between Z-20JP and host link (D-sub 25-pin)
D4
Programmer connection cable 1.5 m between D4-HPP-1 and
S-15JP Open
D4 series general-purpose port (D-sub 15-pin)
D3
Programmer connection cable 3 m between D4-HPP-1 and
S-30JP Open
D4 series general-purpose port (D-sub 15-pin)
Programmer
Z-20JP Programmer connection cable 2 m, modular jack on both ends Open
Connection cable 3 m between DOS/V and host link (D-sub 25-pin), KPP
S-30JD-T 280 Open
DOS/V and D4 series general-purpose port (D-sub 25 pin)
Connection cable 3 m between DOS/V and D4 series programmer port DirectSOFT
S-30JG-T 370 Open
(D-sub 15-pin)
Maintenance Product Terminator I/O
D3-D4-BAT CPU memory backup battery 213 Open
Features
Specifications
Dimensions
CPU
Specifications
Special Module
Input/Output
Module
Analog Module
Base Unit
Accessories/
Connector
229
D4 Series
PLC
HMI
Specifications
SENSOR
D4 series CPU specifications
ENCODER System Capacity D4-454/D4-454DC-1
Ladder Memory Capacity (Word)

COUNTER
Built-in Memory 31.5 K Flash
V Memory Capacity (Word) 15.3 K
INFORMATION
Battery Backup ○
Total CPU Memory Input/Output Points
(The Actual Input/Output Points Differ
8,192 (I+Q+GI+GQ)
According to the Input/Output
Configuration Selected.)
Input/Output Module Point Density 2/4/8/16/32/64
Common Number of Input/Output Module Slots per
Subject Matter 4/6/8
Base Unit
SJ-ETHER/SJ Number of Input/Output Points that can
Input 1,024 points/
be Mounted for the CPU and Expansion
Output 1,024 points
Base. Serial Remote I/O (Including CPU
DL05/06 Up to 4,224
and Expansion Input/Output)
Remote I/O Channel 3
DL205
Input/Output Points per
512, 2,048 (Port 3)
Remote Channel
D4 Ethernet Remote I/O ○
Discrete Input/Output Points Up to 8,192 (Including CPU and expansion input/output)
D3 Analog Input/Output Channel Allocate to the V memory
Remote I/O Channel Restriction by power supply
Programmer Input/Output Points per
16,384 (When using I, Q, M, GI,GQ and data registers any area.)
Remote Channel
KPP Performance
Contact Point Execution
DirectSOFT 0.96 μs
(Boolean Operation)
Standard Scan Time
Terminator I/O 4 to 5 ms
(During 1K Boolean Operation)
Programming and Diagnosis Function
Ladder Type ○
Stage Type ○/1,024
Rewrite During RUN ○
Variable / Fixed Scan Fixed or variable
Number of Instructions 255
Internal Relay 2,048
Timer 256
Counter 256
Direct Input/Output ○
Subroutines ○
Features For/Next Loop ○
Timed Interrupt ○
Specifications Integer Math ○
Floating-point Math ○
Dimensions Trigonometric Functions ○
Table Instructions ○
CPU
Specifications PID Control ○, 16-loops
Drum Sequencer ○
Special Module Bit of Word ○
Real-time Clock / Calendar ○
Input/Output
Module Internal Diagnosis Function ○
Password Multi-level
Analog Module System/User Error Log ○
Communication Function: Port1
Base Unit Built-in Ports 4 ports
K-sequence (Programmer-dedicated) ○
Accessories/
Connector DirectNet (CCM2) ○
MODBUS RTU Master / Save ○
ASCII Output (PRINT) ○
Maximum Communication Speed (bps) 38.4 k
Weight (g) 730, 750
230
D4 Series
PLC
HMI
Dimensions
SENSOR
■Dimensions (Unit: mm)
Base Unit A B C ENCODER
D4-04B-1 293 275 258
D4-06B-1 367 349 332 COUNTER
D4-08B-1 441 423 406
INFORMATION
119
150 Common
Subject Matter
SJ-ETHER/SJ
DL05/06
C
B
A DL205
D4
D3
Programmer
KPP
DirectSOFT
Terminator I/O
Features
Specifications
Dimensions
CPU
Specifications
Special Module
Input/Output
Module
Analog Module
Base Unit
Accessories/
Terminal Unit
Accessories/
Connector
231
D4 Series
PLC
HMI
CPU Specifications
SENSOR
■CPU Module
ENCODER D4-454 D4-454DC-1
COUNTER
INFORMATION
Common
Subject Matter
SJ-ETHER/SJ The photo shows the D4-454.

(The shape is the same.)
DL05/06 General Specifications Performance Specifications

Items Specifications Items Specifications
DL205 Model Number D4-454 D4-454DC-1 Built-in Memory 31.5 K Flash
85 to 132 V AC Data Register Capacity (Word) 15.3 K
20 to 28 V DC
D4 (100 V range), Battery Backup Yes
Input Voltage Range (24 V DC range,
170 to 264 V AC
ripple is below 10%.) Maximum Input/Output Points 8,192 (I+Q+GI+GQ)
(200 V range)
D3 Input/Output Points that can Input 1,024 points/Output 1,024 points (CPU and
Maximum Inrush Current 20 A 20 A
be Mounted expansion base) Up to 4,224 (Serial remote I/O)
Maximum Electric Power
Programmer 50 VA 38 W Remote I/O Channel 3
Consumption
Insulation Resistance > 10 MΩ (500 V DC applied) Input/Output Points per
512, 2,048 (Port 3)
KPP Remote Channel
Storage Ambient
-20˚C to 70˚C Ethernet Remote I/O Yes
Temperature
DirectSOFT Analog Input/Output Channel Allocate to the data register.
Use Ambient Temperature 0˚C to 60˚C
Remote I/O Channel Restriction by power supply
Ambient Humidity Relative humidity 5% to 95% (No condensation)
Terminator I/O Input/Output Points per 16,384 (When using I, Q, M, GI,GQ and data
1 min (1,500 V AC is applied between primary,
Withstand Voltage Remote channel registers any area.)
secondary, field grounds, and RUN relay.)
Contact Point Execution
Compliant with MIL STD 810C, Method 514.2, JIS 0.96 μs
Vibration Resistance (Boolean Operation)
C0040, and sine wave oscillation test method
Standard Scan Time (During
Compliant with JIS C0041 4 to 5 ms
Impact Resistance 1K Boolean Operation)
Compliant with MIL STD 810C, Method 516.2
Language System Simultaneous use of relay symbol type and stage type
Noise Resistance NEMA (ICS3-304)
Rewrite During RUN Yes
Surrounding Atmosphere in
No corrosive gases Variable / Fixed Scan Fixed or variable
Place of Use
Number of Instructions 255
Internal Relay 2,048
Outline Timer 256
Features The D4-454 are equipped not only with all performances other CPU models Counter 256
have, but also with other functions. Although equipped with numerous Direct Input/Output Yes
Specifications functions as a CPU, the D4-454 is available at low price. Subroutines Yes
For/Next Loop Yes
Dimensions 16 PID Loops Timed Interrupt Yes
The D4-454 can directly process up to 16 PID loops in the CPU. The control Integer Math Yes
CPU
Specifications mode can be selected from diverse control modes including automatic, Floating-point Math Yes
manual, and cascade control. Moreover, various types of alarms such Trigonometric Functions Yes
Special Module as process variation, rate of change, and deviation are available. Since Table Instructions Yes
loop operation parameters are stored in the V memory, they can be easily PID Control Yes
Input/Output
Module accessed from programmable displays, etc. The setup of the loop can be Drum Sequencer Yes
performed using Koyo Electronics' DirectSOFT programming software. Loop Bit of Word Yes
Analog Module specifications and various functions are summarized in the following page. Real-time Clock / Calendar Yes
Internal Diagnosis Function Yes
Base Unit Floating-point Arithmetic Password Multi-level
The D4-454 support floating-point arithmetic of IEEE format. Namely, the System/User Error Log Yes
Accessories/
Connector D4-454 are equipped with all trigonometrical functions and various formats Transmission method: RS-232C compatible (Non-isolated)
Communication Function:
Transmission speed: 9,600 bps (Fixed) Connection:
for integer / floating-point number conversion. Port0 (Programmer Port)
D-sub 15-pin (Female) Protocol:K sequence (S)
Transmission method: RS-232C compatible (Non-isolated)
Power Source Communication Function: Transmission Speed: 300, 600, 1,200,2,400, 4,800,
The power source of the D4 series is mounted on the CPU. The D4 series Port 2 9,600, 19,200, 38,400 Connection: 6-pin modular
comes in AC type and DC type (-C) models. Protocol: DirectNET (S), Non-procedure (S), K sequence (S)
Communication Function: Transmission method: RS-232C, RS-422 and RS-485
Port 1, 3 compatible (Non-isolated) Transmission Speed: 300,
* There is the 6-pin terminal 600, 1,200, 2,400, 4,800, 9,600, 19,200, 38,400bps)
block that is connected to the Connection: D-sub 25-pin (Female) Protocol: DirectNET
port 3 inside the PLC. (M/S), MODBUS (S), Non-procedure (M/S), K sequence (S)
232
D4 Series
PLC
HMI
CPU Specifications
SENSOR
■Memory Cartridge
D4-EE-2 G-53M ENCODER
COUNTER
INFORMATION
Common
Subject Matter
SJ-ETHER/SJ
Memory Cartridge DL05/06

Items D4-EE-2 G-53M
Memory Type EEPROM CMOS RAM DL205
Program Memory Capacity
32 K 7.5 K
(Word) D4
No (Backup by high
Battery No
capacity capacitor) D3
Writing Cycle Life >10,000 Not applicable
Write Inhibit Internal jumper Internal jumper Programmer
Memory Erasure Method Electricity Electricity
D4-430 x x KPP
Compatibility with D4-440 ○ (Only 15.5 K) ○
Each CPU D4-450 ○ (Only 15.5 K) ○ DirectSOFT
D4-454 ○ ○
Weight (g) 38 42 Terminator I/O
* Battery model No. for replacement: D4-MC-BAT
Outline
The memory that stores the program of the old model CPU. However, this is
not required for the D4-430.
Since the D4-440 does not have a built-in memory, a memory cartridge is
required.
The D4-450/D4-454 can increase its memory capacity using a memory
cartridge in place of the built-in memory.
Features
Specifications
Dimensions
CPU
Specifications
Special Module
Input/Output
Module
Analog Module
Base Unit
Accessories/
Connector
233
D4 Series
PLC
HMI
Special Module
SENSOR
■Serial Remote I/O Module
ENCODER D4-RM D4-RS/D4-RSDC
Master module Slave module
COUNTER
INFORMATION
Common
Subject Matter
SJ-ETHER/SJ
DL05/06 Remote Master Specifications Outline

Items Specifications A large-scale remote I/O is available for the D4 series. The purpose of the
DL205 Module Type Intelligent remote I/O is to reduce the cost of wiring by arranging the I/O near the device
Number of Masters per CPU Up to 2 units subject to control. The capacity of each CPU is shown in the right table.
D4 Number of Slaves that can The same functions the as the D4-RM are incorporated into the 25-pin port
7 slaves per channel
be Supported equipped to the CPU of D4-450/D4-454 and the terminal block of D4-454,
D3 By shielded twisted pair cable but the D4-RM explained here serves the same functions. The mechanism
Communication with Slave
RS-485 (38.4 kbps) is as follows. The dedicated module called the“remote master”should be
Programmer Recommended Cable Belden 9841 or equivalent mounted on the CPU base unit. This master module can control up to seven
Transmission Distance Up to 1 km remote slaves. Each slave module is connected to the master module in a
KPP Terminal Block Type Anchored daisy chain using twisted pair communication cables (maximum length is 1
Weight 240 g km). Each remote slave is mounted on the D4 series base unit (any size). The
DirectSOFT standard D4 series module is mounted on the remote base.
Normal I/O addresses or dedicated remote I/O addresses can be assigned to
Terminator I/O
Remote Slave Specifications
the remote I/O points. The remote master sends the remote I/O information
Items Specifications to the CPU. Communications between the remote master and the CPU are
Maximum Slave Points per performed asynchronously with CPU scanning.
512 (D4-430), 1,024 (D4-440/450/D4-454)
CPU
The input/output module mounted on the slave base Items D4-454 D4-450 D4-440 D4-430
unit does not automatically occupy the standard
Maximum Remote Master
input/output points.
Occupied I/O Point Number that can be 3* 3* 2 2
The module occupies the remote I/O points at a rate
Supported
that is equal to the I/O points of each base unit and it
can optionally use the standard I/O addresses. Maximum I/O Points that
1,536 1,536 1,024 512
Terminal Block Type Anchored can be Supported
100 V AC /200 V AC (D4-RS) Maximum I/O Points that
External Power Supply can be Supported per 512 512 512 512
24 V DC (D4-RSDC)
Channel
Features D4-RS: 760 g
Weight Maximum Remote I/O Base
D4-RSDC: 760 g 7 7 7 7
Unit Number per Channel
Specifications
* Up to 2 units for D4-RM, 1 channel is via 25-pin CPU port.
Dimensions
CPU
Specifications
Special Module
Input/Output
Module
Analog Module
Base Unit
Accessories/
Connector
234
D4 Series
PLC
HMI
Special Module
SENSOR
■Ethernet Remote I/O Master Module
H4-ERM100 ENCODER
COUNTER
INFORMATION
Common
Subject Matter
The photo shows the H4-ECOM100. SJ-ETHER/SJ

Specifications Network Connections Between ERM and Other DL05/06

Items Specifications Ethernet Devices
Communication 10/100 Base-T/TX It is strongly recommended that the ERM module and the slave be arranged DL205
Data Transfer Rate 10/100 Mbps on a dedicated Ethernet remote I/O network. The Ethernet network can
Link Distance 100 m process an extremely enormous amount of data transactions. Generally, the D4
Ethernet Port RJ45 processing is performed at very high speed. However, when Ethernet traffic
Ethernet Protocols TCP/IP, IPX is heavy, processing may have adverse effect on the reliability of the slave D3
Weight 179 g input/output and the speed of the input/output network. Therefore, the ERM
network and several ERM networks should be separated from the ECOM / Programmer
Outline business network.

KPP
The Ethernet remote master H4-ERM100 connects the CPU system of the
D4-430, D4-440 and D4-450/D4-454 to the slave input/output via a high DirectSOFT
speed Ethernet link.
Terminator I/O
Needs for Increasing Input/Output
Up to 16 EBC systems can be added to one ERM module. The EBC systems
can be also used in combination.
Note: In the case of applications that require large capacity T1H-EBC100 analog input/output or
H4-EBC100 16-channel analog input/output, the buffer capacity of a single H4-ERM100
module can be exceeded. In such a case, the H4-ERM100 should be added to the system.
Easy Connection
The ERM is connected to the user's control network through a category 5
UTP cable (cable length is up to 100 m). If you want to extend the connection
length or increase the number of nodes, you can use a repeater. The PLC,
ERM and EBC slave modules are linked together to update the remote I/O Features
point. The scan cycles of these three models are simultaneously generated
but are asynchronously performed. Therefore, it is recommended to contain Specifications
the important input/output points that need to be monitored for each scan, in
the CPU base unit. Dimensions
CPU
Specifications
Special Module
Input/Output
Module
Analog Module
Base Unit
Accessories/
Connector
235
D4 Series
PLC
HMI
Special Module
SENSOR
■Communication Module
ENCODER H4-ECOM100
COUNTER
INFORMATION
Common
Subject Matter
SJ-ETHER/SJ
DL05/06 Specifications Easy Connection

Items Specifications Category 5 UTP cables (up to 100 m) are used.
DL205 Communication 10/100 Base-T Ethernet If the distance is extended or the number of nodes is increased, a hub should
Data Transfer Rate 10/100 Mbps be used.
D4 Link Distance 100 m
Ethernet Port RJ45
D3 Ethernet Protocols TCP/IP, UDP/IP, IPX and Modbus TCP
Weight 179 g
Programmer
KPP
Features
- High speed peer-to-peer network connection among PLCs
DirectSOFT - High speed updates using the DirectSOFT programming software
- High-performance access functions from the human machine interface
Terminator I/O (HMI) and Windows-compatible software
- SDK for customizing drivers (Free of charge)
- Virtually unlimited number of network nodes
- Easy setting by DIP switch and NetEdit software
Outline
The Ethernet communication module enables high speed peer-to-peer
network connections among PLCs at a revolutionarily low cost. It is not
necessary to designate a specific PLC as the network master. You can freely
start communications from any PLC. Moreover, the Ethernet communication
module can link the PLC and computers using industry-standard cables,
hubs, and repeaters. If Visual Scope is used, the Ethernet communication
Features module can link to simple Windows spreadsheet programs and PLCs
connected to the network. Also, the module can link to human machine
Specifications interface (HMI) software and a direct logic PLC. Furthermore, using the
DirectSOFT programming software, you can monitor and update ladder
Dimensions programs that operate in any direct logic PLC on the network.
CPU
Specifications
Special Module
Input/Output
Module
Analog Module
Base Unit
Accessories/
Connector
236
D4 Series
PLC
HMI
Special Module
SENSOR
■Serial Data Communication Module
D4-DCM ENCODER
COUNTER
INFORMATION
Common
Subject Matter
SJ-ETHER/SJ
Specifications DL05/06
Items Specifications
Module Type Intelligent DL205
Number of Modules per CPU Up to 7 units, any slot of the CPU base unit
RS-232C/422, DirectNet (CCM2) or MODBUS (only D4
slave) RTU protocol.
Communication The communication speed can be selected in the D3
range of 300 bps to 38.4 Kbps. Odd parity or no
parity. HEX or ASCII mode.
Programmer
Recommended Cable Belden 9729 or equivalent (In the case of RS-422)
Wiring Connector D-sub 25-pin connector
KPP
Weight 265 g
DirectSOFT
Outline
The D4 series data communication module is a general-purpose Terminator I/O
communication interface for the D4 series family. This module can be used
mainly for four applications.
- Expansion of the general-purpose communication ports to be connected
to computers and programmable displays
- Network interface to the DirectNet (CCM2) network
- Network interface connected to the MODBUS network using the RTU
protocol
- Interface with non-procedural serial transmitters and receivers
Expansion of Communication Ports

All models of the D4 series C PU are equipped with at least t wo
communication ports. However, if you want to expand the communication Features
ports, you can separately mount the data communication module. Since the
DM is the expansion communication port, it has the same specifications as Specifications
Port 1 of the D4 series. Therefore, if the device can be connected to Port 1
of the D4 series CPU, it can be connected to the DM. Check if the device is Dimensions
equipped with a driver compatible with the D4 series. Thus, you can connect
CPU
programmable displays and computers to the DM. Moreover, since the DM Specifications
requires no programming, it can start data transfer if the DM communication
parameters are set and the DM is connected to the device over cable. Special Module
Input/Output
Module
Analog Module
Base Unit
Accessories/
Connector
237
D4 Series
PLC
HMI
Special Module
SENSOR
■16 Loop PID Coprocessor
ENCODER F4-16PID
COUNTER
INFORMATION
Common
Subject Matter
SJ-ETHER/SJ
DL05/06 General Specifications Alarm Specifications

DL205 Module Type Coprocessor, intelligent Designate the dead zone of alarms (0.1% to 5%) as to all
Dead Zone
Number of Loops Up to 16 units alarms except the rate of change.
D4 Number of Modules per Start the Q output or M depending on the conditions of 4
Up to 6 units, Any slots in the CPU base unit PV Alarm
CPU alarm points.
D3 PID type in the position or velocity form. Optionally, direct Start the Q output or M depending on the conditions of 4
PID Algorithm or reverse operation, error square root, and error square alarm points. Designate the alarm that indicates the PV
Programmer control can be designated. PV Deviation deviation (top and bottom) from the set point value (yellow
deviation) and the alarm that indicates a large PV deviation
Designate the time interval between PV samples in the from the set point value (orange deviation).
Sample Rate
KPP range of 0.1 to 999.9 in units of second or minute.
When the PV change is faster than the limit of the
When the internal relay (M) starts, the relevant loop Rate of Change
designated rate of change, start the Q output or M.
DirectSOFT Automatic/Manual becomes the automatic mode. When the loop is the
manual mode, the PV alarm monitoring continues. Transmitter Failure Monitor the PV to check if the transmitter has failed.
Terminator I/O In the case of flow control use, designate the square root
Square Root PV
of PV. Outline
Regarding the allowable change in set points, designate The F4-16PID module is a PID coprocessor module designed to execute up
Limit SP
the maximum value and minimum value. to 16 PID loops independently from the D4 series CPU. The F4-16PID reads
Gain Designate the proportional gain (0.00 to 99.99). process variables using a high speed intelligent bus interface and directly
Reset
Designate the reset time (0.1 to 999.9) in units of minute, writes the PID output in the V memory of the D4 series CPU. Also, software
second, millisecond, or microsecond. that enables the configuration of PID loops by simple menu manipulation
If the loop is changed from manual to automatic, the bias is available. Since the ladder program required for the CPU is minimized, it
and the set point are automatically initialized. With this can reduce the effects of PID calculation, which largely uses floating-point
Bumpless Switching I
function, the data can be transferred without causing
rapid change. arithmetic performed by the coprocessor, on the CPU scan time. As a result,
When the module switches from manual to automatic, the while the coprocessor is executing high speed PID, the CPU can execute
bias is set so as to become equal to the output. Thus, high speed discrete control. This architecture enables the F4-16PID to
Bumpless Switching II
Features without entering the set point again, the module can be deliver higher performance than miniature PLCs in which PID instructions are
switched to and from the automatic mode. incorporated into the instruction words.
Specifications Designate the maximum value and the minimum value of
Limit Output
the output range as on option.
Operation
When the set point changes greatly, the proportion bias is
Dimensions Process variables (PV) is generally received from analog input and input
adjusted. Thus, the loop can be stabilized at high speed to
Step Bias modules such as thermocouples. The input value is copied in the process
prevent the output from exceeding the range. Use the step
CPU
Specifications bias with normal adjusted bias operation. variable position by the ladder program of the user.
If the PID type in the position format is designated, the The PID module calculates the loop output value and saves it in the V memory
Special Module reset operation stops when the PID output reaches 0 or for output. The user can write this value in the analog output channel, use it
Wind-up Prevention
100%. Select the adjusted bias operation or freeze the
bias operation. as the time ratio for discrete output, or send it to a loop that is different from
Input/Output
Module Designate the derivative time (0 to 999.9) in units of
the set point or a cascade loop.
Rate All loop information is read from and written in the V memory block
minute or second.
Analog Module designated by the user. Each loop that is set to ON requires 32 V memory
Designate the differential gain restricting coefficient that
Rate Limiting restricts PV to be used in the calculation of the derivative positions. Since all loop parameters are stored in the V memory, any device
Base Unit term. (99.99 to 00.01) that can read from and write in the V memory of the D4 series (instruction
Accessories/ Designate the increase and decrease values ("allowance") word programmers, programmable displays, etc.) can configure/adjust and
Connector Error Dead Zone that are more than and less than the set point. The output monitor the loops.
is not changed in this section.
If the error is squared, the effects that a small error have
Error Square on the loop output can be minimized, but both "error
square" and "error dead zone" control should be enabled.
When inputting a 4 to 20 mA sender in the analog input
20% Offset from PV module range (0 to 20 mA), designate a 20% offset from
PV.
Weight 208 g
238
D4 Series
PLC
HMI
Special Module
SENSOR
■4-loop Temperature Controller
F4-4LTC ENCODER
COUNTER
INFORMATION
Common
Subject Matter
A cover is available.
SJ-ETHER/SJ
General Specifications Thermocouple Specifications DL05/06

Module Type Coprocessor, intelligent J type: -190˚C to 760˚C (-310˚F to 1,400˚F) DL205
Number of Loops Up to 4 units E type: -210˚C to 1,000˚C (-346˚F to 1,832˚F)
Number of Modules per CPU Up to 8 units, any slots in the CPU base unit K type: -150˚C to 1,372˚C (-238˚F to 2,502˚F) D4
R type: 65˚C to 1,768˚C (149˚F to 3,214˚F)
Occupied I/O Point No
Temperature Range S type: 65˚C to 1,768˚C (149˚F to 3,214˚F)
Setting memory 24 dedicated memory blocks per loop T type: -230˚C to 400˚C (-382˚F to 752˚F) D3
Input Type Resistance thermometer bulb or thermocouple B type: 529˚C to 1,820˚C (-984˚F to 3,308˚F)
Controller Output Open collector, 5 to 26.4 V DC (0.15 A) N type: -70˚C to 1,300˚C (-94˚F to 2,372˚F) Programmer
C type: 65˚C to 2,320˚C (149˚F to 4,208˚F)
Converter Type Charge Balancing, 24-bit
> 100 dB (50 Hz and 60 Hz) Input Fault Protection 60 Vms or 50 V DC (Maximum) KPP
Notch Filter Cold Junction Compensation Automatic compensation
(f-3 dB = 13.1 Hz)
Input Impedance 20 MΩ DC DirectSOFT
Common Mode Rejection Minimum 90 dB (DC),
Ratio minimum 150 dB(50 Hz and 60 Hz) Resolution ±0.1˚C (Relative accuracy)
Maximum Error ±3˚C (Do not include thermocouple error.) Terminator I/O
Selectable in units of module
Sample Rate 800 ms (10 Hz filter)
160 ms (50 Hz filter) Resistance Thermometer Bulb Specifications
Current Transformer 0.5 A to 50 A detection range Items Specifications
Minimum Output ON Time 300 ms to detection heater current Pt 100 Type: -200˚C to 850˚C (-328˚F to 1,562˚F)
Loop Operating Modes PID control ON/OFF control Pt 1000 Type: -200˚C to 595˚C (-328˚F to 1,103˚F)
Designate the sample rate and the time for producing Temperature Range jPt 100 Type: -35˚C to 450˚C (-36˚F to 842˚F)
PID Control Period 10 Ω Type: -200˚C to 260˚C (-328˚F to 500˚F)
the output (0.5 to 99.9 s).
25 Ω Type: -200˚C to 260˚C (-328˚F to 500˚F)
Designate the upper limit and the lower limit as the Input Fault Protection 50 V DC (Maximum)
Limit SP
allowed change in the set point.
Resistance Thermometer
Convert the temperature into the industrial unit 200 μA
Scaling Bulb-excited Current
automatically.
Resolution ±0.1˚C
Designate the proportional gain (0.0 to 6553.5). If the Features
Maximum Error ±1˚C
Gain automatic adjusting function is set, the gain is also
automatically decided. Specifications
Outline
Designate the reset time (0 to 65535 s). If the
Reset automatic adjusting function is set, the reset time is The F4-4LTC contains the functions of four single loop temperature
Dimensions
also automatically decided. controllers in one module. Since this module is equipped with four kinds of
When the PID output reaches 0 or 100%, the reset configurable asynchronous PID loops and temperature input / control output, CPU
Wind-up Prevention operation stops. When the process temperature it can maintain accurate temperature control if the PLC is in the STOP mode. Specifications
starts responding, the bias is automatically adjusted. Moreover, this module can control the temperature up to ±3276.7˚C and Special Module
Designate the derivative time (0 to 65535 s). If the supports thermocouple input and resistance thermometer bulb input. Simply
Rate automatic adjusting function is set, the rate is also by changing the setting of the jumper, you can select the optimal input Input/Output
automatically decided. Module
configuration for user applications. Both input configurations support the SSR
Weight 360 g output for controlling heaters and coolers. Analog Module
Alarm Specifications Operation Base Unit

Items Specifications The temperature is directly read by the F4-4LTC via a resistance thermometer
The temperature 'dead zone' of the alarm should be bulb or thermocouple input. If the temperature does not reach the target Accessories/
Connector
Dead Zone designated. If the temperature exceeds the alarm limit value (set point), the control output automatically starts. Also, since the F4-
(dead zone), the alarm is activated as normal.
4LTC has functions for automatically adjusting the control loop, it can be
The temperature has exceeded the programmed easily adapted to changes in temperature and process state. Moreover, since
High Temperature
upper limit.
the F4-4LTC is the intelligent module for the D4 series, the ramp / soak set
The temperature has exceeded the programmed points can be easily changed by ladder programs.
Low Temperature
lower limit.
Since floating-point arithmetic is executed in the temperature controller,
If the temperature is higher or lower than the set point the CPU needs minimum set and ladder programs, and calculations have
Deviation
by exceeding the deviation limit, Q output or M starts.
little effect on the CPU scan time. Moreover, the temperature controller is
If a resistance thermometer bulb or thermocouple is equipped with alarm and diagnostic functions for monitoring conditions
Transmitter Failure
burned out, or the input is lost, this alarm is issued.
including low-temperature alarms, high-temperature alarms, deviation
alarms, heater burnouts, and transmitter failures.
239
D4 Series
PLC
HMI
Special Module
SENSOR
■High Speed Counter Module
ENCODER H4-CTRIO
COUNTER
INFORMATION
Common
Subject Matter
SJ-ETHER/SJ
DL05/06 General Specifications Input Resources

DL205 Module Type Intelligent Counter/Timer 4 (2 per 4-input channel group)
Number of Modules per x 1, x 2 or x 4, encoder, up or down counter, edge
Only the restriction by consumption current
D4 Base Unit Response Option timer, dual edge timer, input pulse catch, reset,
prohibition
No. The input/output is directly allocated to the V memory
Occupied I/O Point
D3 of the PLC and can be accessed by computer control. Timer Range/Resolution 4.2 billion (32-bit), 1μs
Terminal Type Removable 20P terminal block Counter Range ±2.1 billion (32 bits or 31 bits + sign bit)
Programmer 2,500 V (Between input/output and logic), 1,000 V
Isolation
(Input channel to input channel, between all outputs) Output Resources
KPP Weight 252 g
Pulse Output/Discrete Pulse outputs: 2 channel (2 outputs per channel,
DirectSOFT
Input Specifications Output 20Hz to 20kHz), discrete outputs: 4 points
Items Input Specifications Pulse output: Pulse / Direction or CW/CCW,
Terminator I/O
Input 8 points (Sink/source), up to 100 kHz Profile: Trapezoid, serpentine curve, symmetric
Minimum Pulse Width 5 μs serpentine curve, dynamic position, dynamic speed,
origin search, speed mode, RUN mode to the limit,
Input Voltage Range 9 to 30 V DC RUN mode to the position
Maximum Voltage 30 V DC Resource Option Discrete output: 4 (Set, reset, pulse on, pulse off,
Input Voltage Protection Zener diode (Fixed to 33 V DC) toggle, and reset count functions are configurable.
Rated Input Current 8 mA (Standard), 12 mA (Maximum) (Assign to the response to timer / counter input
functions.))
Minimum ON-state Voltage 9.0 V DC Raw data mode: Direct access is possible from the
Maximum OFF-state Voltage 2.0 V DC user's application program to discrete output.
Minimum ON-state Current 5 mA (9 V DC is required for guaranteeing the ON status.) Target Position Range ±2.1 billion (32 bits or 31 bits + sign bit)
Maximum OFF-state Current 2.0 mA
OFF→ON Response Time Below 3 μs
Features
ON→OFF Response Time Below 3 μs Outline
The high speed counter input/output (H4-CTRIO) module is designed to
Specifications Output Specifications receive high speed pulsed input signals for count measurement or timing
Items Specifications applications, and transmits high speed pulsed output signals that can be
Dimensions used for stepping motor control, monitoring, alarms, and other discrete
4 points (Independent isolation specification), Current
Output source/sink, FET output (Open drain, source, floating- control functions. The H4-CTRIO module can be flexibly used for applications
CPU gate drive) that require accurate count measurement or timing based on input events or
Specifications
Voltage Range 5 V DC to 36 V DC for applications for high speed control output.
Special Module Maximum Voltage 36 V DC Since the H4-CTRIO module has a built-in microprocessor, it can operate
Output Clamp Voltage 60 V DC asynchronously with the PLC controller. Namely, the output generated from
Input/Output Maximum Load Current 1.0 A this module responds to the input signal in real-time. Therefore, the PLC
Module
Maximum Load Voltage 36 V DC controller can scan input/output without delay time.
Analog Module Maximum Leakage Current 100 μA The H4-CTRIO module is designed for use with user devices that transmit
Maximum Allowable Inrush pulse output such as a incremental encoder.
5 A (20 ms between)
Base Unit Current
OFF→ON Response Time Below 3 μs
Accessories/ ON→OFF Response Time Below 3 μs
Connector
ON-time Voltage Drop Up to 0.3 V
Required only by loop power supply. Not required
External Power Supply
when using the internal module function.*
Overcurrent Protection Up to 15 A
Stop by Temperature Contact point temperature = 150˚C
Overheat Prevention Reset Contact point temperature = 130˚C
Duty Cycle Range 1% to 99% (In unit of 1%, default = 50%)
a) Assign one preset value to each output.
Configurable Preset Value
b) Assign one preset value table to each output. Up to
a) Single
128 preset values can be stored in one table.
b) Multiple
Maximum table set number = 255
* When using the stepping motor, prepare an external power supply.
240
D4 Series
PLC
HMI
Input/Output Module
SENSOR
■Input Module《DC 8 Points》
D4-08ND3S ENCODER
COUNTER
INFORMATION
Internal Module Circuitry
Common
24 to 48 V DC To LED Common
Optical Isolation
Subject Matter
24 to 48 V DC A cover is available. 24 to 48 V
DC
24 to
The photo 48theVJapanese
shows DC model. SJ-ETHER/SJ
(The shape is the same.) Input
24 to 48 V DC
Input Specifications Wiring Diagram Configuration shown is current sinking. DL05/06
24 to 48 V DC
Items Specifications 24 to 48 V DC
24 to 48 V DC
Number of Inputs per DL205
8 (Sink/source) 24 to 48 V DC 24
Module 24 to 48 V DC D
24 to 48 V DC
Common24 to 48 V DC 1 points 1 common x 8 (Inter-common independence) D4
Rated Input Voltage 24 to 48 V DC 24 to 48 V DC
Input Voltage Range 20 to 52 V DC 24 to 48 V DC D3

Maximum Input Voltage 52.8 V DC 24 to 48 V DC
ON Voltage Level > 18 V Programmer
24 to 48 V DC
OFF Voltage Level <7V
24 to 48 V DC
Input Impedance 4.8 kΩ KPP
Input Current 5 mA (24 V DC), 10 mA (DC 48 V)
Minimum ON-state Current 3.5 mA DirectSOFT
OFF→ON Response Time 3 to 10 ms Terminator I/O
ON→OFF Response Time 3 to 12 ms
Terminal Type Removable 20P terminal block
Status Display Logic side Equivalent Circuit
Weight 250 g Internal Module Circuitry
Common
24 to 48 V DC ディレーティング
Derating Chart Optical Isolation
To LED
24 to 48 V DC 10 24 to 48 V
DC
24 to 48 V DC
2.0A
Number of Inputs Points
8 Input
24 to 48 V DC
Configuration shown is current sinking.
24 to 48 V DC 6
Features
24 to 48 V DC ディレーティング
4
24 to 48 V DC 10 Specifications
24 to 48 V DC 2 2.0A
8
Dimensions
0
6 CPU
0 10 20 30 40 50 60 Specifications
Ambient Temperature (˚C) 4
Special Module
2
Input/Output
0 Module
0 10 20 30 40 50 60 Analog Module
Ambient Temperature (˚C)
Base Unit
Accessories/
Connector
ディレーティング
10
2.0A
241
0 GENERAL CATALOG 2018
0 10 20 30 40 50 60
D4 Series
PLC
HMI
Input/Output Module
SENSOR
■Input Module《DC16 Points》
ENCODER D4-16ND2
COUNTER
INFORMATION
12 to 24 V DC
Common
Common 12 to 24 V DC To LED
Optical Isolation
Subject Matter
SJ-ETHER/SJ The photo shows the Japanese model.

DL05/06 Input Specifications Wiring Diagram

Items
12 to 24 V DC
Specifications 12 to 24 V DC
DL205 Number of Inputs per
16 (Current source)
Module
D4 Common 8 points 1 common x 2 (Inter-common independence)
Rated Input Voltage 12 to 24 V DC
D3 Input Voltage Range 10.2 to 26.4 V DC
Maximum Input Voltage 26.4 V DC 12 to 24 V DC
Programmer ON Voltage Level Current Flow> 9.5 V
OFF Voltage Level < 4.0 V
KPP Input Impedance 3.2 kΩ (12 V DC), 2.9 kΩ (24 V DC)
Input Current 3.8 mA (12 V DC), 8.3 mA (24 V DC)
DirectSOFT Minimum ON-state Current 3.5 mA
Current Flow
Terminator I/O OFF→ON Response Time 1 to 7 ms (Standard: 2.3 ms)
ON→OFF Response Time 2 to 12 ms (Standard: 4.6 ms)
Status Display Logic side
Equivalent Circuit
Weight 250 g
12 to 24 V DC
Derating Chart Common
12 to 24 V DC To LED
20 Optical Isolation
2.0A
16
Input
12
Features
12 to 24 V DC 8
Specifications 20
4
2.0A
16
Dimensions
0
CPU 12
Specifications 0 10 20 30 40 50 60
Special Module Current Flow
4
Input/Output
Module 0
Analog Module 0 10 20 30 40 50 60
Base Unit
Accessories/
Connector
20
2.0A
16
12
242
4 KOYO ELECTRONICS INDUSTRIES CO., LTD.
0
D4 Series
PLC
HMI
Input/Output Module
SENSOR
D4-16ND2F ENCODER
COUNTER
INFORMATION
12 to 24 V DC
Common
12 to 24 V DC To LED Common
Optical Isolation
Subject Matter
The photo shows the Japanese model. SJ-ETHER/SJ
Input Specifications Wiring Diagram DL05/06

12 to 24 V
Items
12 to 24 V DC
Specifications 12 to 24 V DC
Number of Inputs per DL205

16 (Current source)
Module
Common 8 points 1 common x 2 (Inter-common independence) D4
Rated Input Voltage 12 to 24 V DC
Input Voltage Range 10.2 to 26.4 V DC D3
Maximum Input Voltage Current Flow
26.4 V DC 12 to 24 V DC
ON Voltage Level > 9.5 V Programmer

OFF Voltage Level < 4.0 V
Input Impedance 3.2 kΩ (12 V DC), 2.9 kΩ (24 V DC) KPP
Input Current 3.8 mA (12 V DC), 8.3 mA (24 V DC)
Minimum ON-state Current 3.5 mA DirectSOFT
Current Flow
OFF→ON Response Time 1 ms Terminator I/O
ON→OFF Response Time 1 ms
Weight 250 g
12 to 24 V DC
Derating Chart
Common
12 to 24 V DC To LED
Optical Isolation
20
2.0A
16 Input
12
Features
12 to 24 V DC
8
20 Specifications
4
2.0A
16
Dimensions
0
12
CPU
0 10 20 30 40 50 60 Specifications
Current Flow
Special Module
4
Input/Output
0 Module
0 10 20 30 40 50 60 Analog Module
Base Unit
Accessories/
Connector
20
2.0A
16
12
243
4
0 For the latest information, contact our sales persons or see our website.
0 10 20 30 40 50 60
D4 Series
PLC
HMI
Input/Output Module
SENSOR
ENCODER D4-32ND3-1
COUNTER
INFORMATION
Common
Subject Matter

Common
DL05/06 Input Specifications Wiring Diagram 24 V DC Optical Isolation

To LED
ItemsCurrent Flow Specifications

32 (Sink/source) Input
Module 24 V DC Current Flow
-
D4 Common 8 points 1 common x 4 (Inter-common independence) Configuration shown is current sinking.
24 V DC
Rated Input Voltage 24 V DC -
Current Flow
D3 Input Voltage Range 20 to 28 V DC
Maximum Input Voltage- 30 V DC Current Flow
24 V DC
Programmer ON Voltage Level > 19 V
-
OFF Voltage Level < 10 V 24 V DC
KPP Input ImpedanceCurrent Flow 4.8 kΩ

Input Current 5 mA
DirectSOFT Minimum ON-state Current 3.5 mA Current Flow
Maximum OFF-state+ Current 1.6 mA

24 V DC
Terminator I/O OFF→ON Response -- Time 2 to 10 ms
+
ON→OFF Response Time 2 to 10 ms 24 V DC
Current Flow
Terminal Type 40-pin connector. A connector is sold separately. --
Status Display Logic side Current Flow
Weight 190 g
The state that is displayed on the front of the module can only be displayed for up to 16 points at a
time. If the switch is in the A or B position, the state of the first input point group (16 in total for A0
to A7 and B0 to B7) is displayed. If the switch is in the C or D position, the state of the second input
point group (16 in total for C0 to C7 and D0 to D7) is displayed.
Equivalent Circuit
Derating Chart
Features
Common
40
To LED
24 V DC Optical Isolation
2.0A
Specifications 32 40
Current Flow
2.0A
24 32
Dimensions 24 V DC Input
-
16 24 Configuration shown is current sinking.
CPU
Specifications
Current Flow
8 16
Special Module -
24 V DC 0 8
Input/Output
Module 0 10 20 30 40 50 60
0
Current Flow
Analog Module 0 10 20 30 40 50 60
Base Unit +
24 V DC
Accessories/ --
Connector Current Flow
40
244
2.0A
nputs Points

24
D4 Series
PLC
HMI
Input/Output Module
SENSOR
■Input Module《DC64 Points》
D4-64ND2 ENCODER
COUNTER
INFORMATION
Common
Subject Matter

Whe

Wiring of Every 32 Points Using Wiring of Every 32 Points Using
Items Specifications the External 24 V DC Connector the 24 V DC Connector
Module Mounting Position Dedicated to the CPU base unit* DL205
Number of Inputs per
64 (Current source)
Module Current Flow
Current Flow
D4
Common 8 points 1 common x 4 (Inter-common independence) Internal
Connection 24 V DC Common
Rated Input Voltage 24 V DC D3
When the External 24 V DC Connector is Used
Input Voltage Range 20 to 28 V DC Internal Module Circuitry External
Maximum Input Voltage Wiring30 V DC Input Programmer

of Every 32 Points Using Wiring of Every 32 Current
PointsFlow
Using Current Flow
To LED
ON Voltage Level the External
> 20.024VV DC Connector the 24 V DC Connector
Optical Isolation
OFF Voltage Level < 13.0 V 24 V DC
Common KPP
Input Impedance 4.8 kΩ Current Flow
Current Flow
Input Current 5.0 mA (24 V DC) Common DirectSOFT
Internal Current Flow
Minimum ON-state Current 3.6 mA 0V
Current Flow
Maximum OFF-state Current 2.6 mA Common
Terminator I/O Whe
External 24 V DC +
+
External Power Source
Current Flow 24 V DC±10%, up to 320 mA − 24 V DC
Conditions (Option) Current Flow --
Current Flow
OFF→ON Response Time 2.5 ms (Standard) 24 V DC
Common
ON→OFF Response Time 5 ms (Standard)
Common
Terminal Type 40-pin connector x 2. A connector is sold separately. When the External 24 V DC Connector is Used 24
Status Display Current Flow Logic side Internal Module Circuitry
Weight 220 g Wiring of EveryCurrent

32 Points
Flow Using Wiring of Every 32 Points Using Input
To LED
the External 24 V DC Connector Common the 24When
V DCthe 24 V DC Connector is Used
Connector
+ Internal Module Circuitry
Optical Isolation
Since only 32 LEDs are equipped in the module, the state of input points can only be displayed for
24 V DC
-- Input
32 points at a time. If the switch is in the A or B position, the state of the first input point group (32 in
Current Flow To LED
Current Flow Current Flow
total for A0 to A17 and B0 to B17) is displayed (connector 1). If the switch is in the C or D position, the Optical Isolation Common
state of the second input point group (32 in total for C0 to C17 and D0 to D17) is displayed (connector Internal
Connection 24 V
Common DC Common
0V
Features
2).
24 V DC
ディレーティング Common External 24 V DC +
*1. When the 64-point module is used, a dedicated module or communication module cannot be When the External 24 V DC Connector is Used Specifications
0V
Current Flow −
inserted into slots 5, 6, and 7 of the CPU base unit. 80 Current Flow
2. In the case of the D4-430 and D4-440, the expansion Wiringbase unit 32
cannot
PointsbeUsing
mounted to the Input
of Every Wiring of Every 32 Points+ Using
2.0A Dimensions
24 V DC To LED
64-point module. the External 24 V DC Connector 64 the 24 V DC Connector
Common
Optical Isolation
3. In the case of the D4-450/D4-454, if a D4-□□B-1 is used for both the CPU base and the −
CPU
expansion base, the 64-point module can be also mounted on the expansion base. 48 Specifications
Current Flow Current Flow
Current Flow
Common
Internal 32 Current Flow Special Module
0V
Connection When the 24 V DC Connector is Used
24 V DC
Derating Chart +
Common Common
Internal Module Circuitry Input/Output
16 External 24 V DC +
80
24 V DC
-- Input
Module
To LED
−
Current Flow
Current Flow
2.0A 0 Current Flow
64
Optical Isolation Analog Module
0
24 V DC 10 20 30 40 50 60
Common Common
48 Ambient Temperature (˚C) 24 V DC Base Unit

Common
0V
32 Current Flow Accessories/
Current Flow
Equivalent Circuit Connector
+
16 When the External 24 V DCCommon
Connector is Used When the 24 V DC Connector is Used
+ Internal Module Circuitry −
24 V DC
0 -- Input Input
Wiring of Every 32 Points Using Wiring of Every 32 Points Using
To LED To LED
the External 24 V DC Connector Current Flow the 24 V DC Connector
0 10 20 30 40 50 60 Optical Isolation Optical Isolation

Current Flow
Common
Current Flow 24 V DC
Common Common
80
Internal
0V 0V
2.0A
64
External 24 V DC + +
Current Flow 48 Current Flow − −
32 24 V DC
245
Common
16contact our sales persons or see our website.
For the latest information,
Current Flow
80 0
D4 Series
PLC
HMI
Input/Output Module
SENSOR
■Input Module《AC 8 Points》
ENCODER D4-08NA
COUNTER
INFORMATION

100 to 200 V
AC
Common
Common
Subject Matter Optical Isolation To LED
A100 to 200
cover V AC
is available.

(The shape is the same.) Internal M
Input 100 to 200 V
Input Specifications Wiring Diagram

AC
Common
DL05/06
100 to 200 V AC
100 to 200 V AC8
Module
Input
Rated Input Voltage 100 to 200 V AC
D3 Input Voltage Range 80 to 265 V AC
Maximum Input Voltage 265 V AC
100 to 200 V AC
Programmer AC Frequency 47 to 63 Hz
ON Voltage Level > 70 V
KPP OFF Voltage Level < 30 V
Input Impedance 12 kΩ
DirectSOFT Input Current 8.5 mA (100 V AC ), 20 mA (AC 230 V)
Minimum ON-state Current 5 mA
Terminator I/O Maximum OFF-state Current 2 mA
OFF→ON Response Time 5 to 30 ms
Equivalent Circuit
Status Display 265 V AC Logic side
Weight 240 g 100 to 200 V
AC
Common
Derating Chart
100 to 200 V AC
Optical Isolation To LED
10
Input
2.0A
8
Features
6 ディレーティング
Specifications 100 to 200 V AC 10
4
2.0A
8
Dimensions 2
CPU 6
0
Specifications
0 10 20 30 40 50 60 4
Special Module Ambient Temperature (˚C)
2
Input/Output
Module 0
Analog Module 0 10 20 30 40 50 60
Base Unit
Accessories/
Connector
10
2.0A
246
0
0 10 20 30 40 50 60
D4 Series
PLC
HMI
Input/Output Module
SENSOR
■Input Module《AC 16 Points》
D4-16NA ENCODER
COUNTER
INFORMATION
100 V AC
Common
Common
Optical Isolation To LED Subject Matter
100 V AC A cover is available.

Input Inte
Input Specifications Wiring Diagram DL05/06 100 V AC

Com
100 V AC DL205
Number of Inputs per
100 V AC 16
Module
Common 8 points 1 common x 2(Inter-common independence) D4 Inpu
Rated Input Voltage 100 V AC

Input Voltage Range 80 to 132 V AC D3
Maximum Input Voltage 132 V AC
100 V AC
AC Frequency 47 to 63 Hz Programmer
ON Voltage Level > 70 V
OFF Voltage Level < 20 V KPP
Input Impedance 8 kΩ
Input Current 14.5 mA (120 V AC) DirectSOFT
Maximum OFF-state Current 2 mA Terminator I/O
Weight 270 g Equivalent Circuit
100 V AC
Derating Chart
Common
Optical Isolation To LED

100 V AC 20
2.0A
16
Input
Features
8 20 Specifications
100 V AC
2.0A
4 16 Dimensions
0 12 CPU
Specifications
0 10 20 30 40 50 60
8
Ambient Temperature (˚C) Special Module
4
Input/Output
Module
0
0 10 20 30 40 50 60 Analog Module
Base Unit
Accessories/
Connector
20
2.0A
16
12
247
0
D4 Series
PLC
HMI
Input/Output Module
SENSOR
■Input Module《AC/DC 16 Points》
ENCODER D4-16NE3
COUNTER
INFORMATION
Common
Common Optical Isolation

12 to 24 V To LED
Subject Matter 12 to 24 V AC/DC AC/DC

DL05/06 Input Specifications Wiring Diagram Configuration shown is current sinking.
12 to 24 V AC/DC 12 to 24 V AC/DC
16 (Sink/source)
Module
Rated Input Voltage 12 to 24 V AC/DC
D3 Input Voltage Range 10.2 to 26.4 V AC/DC
12 to 24 V AC/DC
Maximum Input Voltage 37.5 V AC/DC
Programmer AC Frequency 47 to 63 Hz
ON Voltage Level > 9.5 V
KPP OFF Voltage Level < 3.0 V
Input Impedance 3.2 kΩ (12 V), 2.9 kΩ (24 V)
DirectSOFT Input Current 3.8 mA (12 V), 8.3 mA (24 V)
Terminator I/O Maximum OFF-state Current 1.5 mA
Terminal Type Removable 20P terminal block Equivalent Circuit
Status Display Logic side Internal Module Circuitry
Weight 250 g Common
12 to 24 V Optical Isolation To LED

AC/DC
12 to 24 V AC/DC
Derating Chart
Input
20
2.0A
Configuration shown is current sinking.

16
Features 12 to 24 V AC/DC
Specifications 20
8
2.0A
16
Dimensions 4
CPU 12
0
Specifications
0 10 20 30 40 50 60 8
Special Module Ambient Temperature (˚C)
4
Input/Output
Module 0
Analog Module 0 10 20 30 40 50 60
Base Unit
Accessories/
Connector
20
2.0A
16
12
248
0 GENERAL CATALOG 2018 Latest catalog (free) is available online.
0 10 20 30 40 50 60
D4 Series
PLC
HMI
Input/Output Module
SENSOR
■Input Module《AC/DC 8 Points》
F4-08NE3S ENCODER
COUNTER
INFORMATION
90 to 150 V Optical Isolation Common

AC/DC
Subject Matter
90 to 150 V AC/DC To LED SJ-ETHER/SJ
Input Specifications
90 to 150 V AC/DC Wiring Diagram DL05/06
90 to 150 V
Items Specifications AC/DC
Number of Inputs per 90 to 150 V AC/DC DL205

8 (Sink/source) 90 to 150 V AC/DC
Module
90 to 150 V AC/DC
90 to 150 V AC/DC
Input Voltage Range 90 to 150 V AC/DC
Maximum Input Voltage 90 to 150 V350 AC/DC
peak < 1 ms D3
90 to 150 V AC/DC
AC Frequency 90 to 150 V AC/DC 47 to 63 Hz
ON Voltage Level > 90 V DC, 75 V AC Programmer
90 to 150 V AC/DC 90 to 150 V AC/DC
OFF Voltage Level < 60 V DC, 45 V AC
Input Impedance 90 to 150 V22 kΩ
AC/DC KPP
90 to 150 V AC/DC
Input Current 5.5 mA (120 V)
Minimum ON-state Current 4 mA 90 to 150 V AC/DC DirectSOFT
Maximum OFF-state Current 2 mA 90 to 150 V AC/DC
OFF→ON Response Time 8 ms Terminator I/O
ON→OFF Response Time 15 ms 90 to 150 V AC/DC

Weight 256 g
Equivalent Circuit
Derating Chart 90 to 150 V Optical Isolation
AC/DC
10
90 to 150 V AC/DC To LED
2.0A
8
90 to 150 V AC/DC
Features
90 to 150 V AC/DC 10 Specifications
4
2.0A
90 to 150 V AC/DC 8
2 Dimensions
6 CPU
0 V AC/DC
90 to 150
Specifications
90 to 150 V AC/DC 0 10 20 30 40 50 60 4
Ambient Temperature (˚C) Special Module
90 to 150 V AC/DC
2
Input/Output
90 to 150 V AC/DC Module
0
0 10 20 30 40 50 60 Analog Module
Base Unit
Accessories/
Connector
10
2.0A
249
0
D4 Series
PLC
HMI
Input/Output Module
SENSOR
■Output Module《DC 8 Points》
ENCODER F4-08TD1S
COUNTER
INFORMATION
Common Power Supply

Optical Isolation
Subject Matter Common
SJ-ETHER/SJ The photo shows the D4-16TR. L To LED

(The shape is the same.) Inter
Output
Pow
Output Specifications Wiring Diagram
Commons Internally Connected 3A
DL05/06 for Each Group
Com
L
DL205 Number of Outputs per
8 (Current sinking) Out
Module Commons Internally Connected
for Each Group
D4 2 points 2 commons x 4
Common
(Inter-common independence)
D3 Operating Voltage 24 to 150 V DC
Output Type MOS FET
Programmer Maximum Output Voltage 200 V DC < 1 ms
ON-time Voltage Drop 0.5 V DC (2 A)
KPP Maximum Current 2 A/point, 4 A/common
Maximum Leakage Current 5 μA
DirectSOFT Maximum Allowable Inrush
30 A (in 1 ms), 19 A (in 10 ms)
Current
Terminator I/O Minimum Load Current Not applicable
OFF→ON Response Time 25 μs
ON→OFF Response Time 25 μs
Fuse 1 unit (3 A) / output (See the figure), unexchangeable
Weight 282 g
Equivalent Circuit
Derating Chart
Power Supply
Optical Isolation
Common
10
L To LED
Number of Outputs Points
2.0A Output
Features 8 Commons Internally Connected
for Each Group
1.5 A/point
ディレーティング 3A
6 10
Specifications
2 A/point 2.0A
4 (5 A/common)8 1.5 A/point
Dimensions
2 6
CPU
Specifications 2 A/point
0 4 (5 A/common)
Special Module 0 10 20 30 40 50 60
2
Input/Output
Module 0
Analog Module 0 10 20 30 40 50 60
Base Unit
Accessories/
Connector
10
ber of Outputs Points
2.0A
8 1.5 A/point
250
2 A/point Latest catalog (free) is available online.
4 (5 A/common) http://www.koyoele.co.jp/english/
2
D4 Series
PLC
HMI
Input/Output Module
SENSOR
D4-16TD1 ENCODER
COUNTER
INFORMATION

Common
+
Optical Isolation Subject Matter
A cover is available. 24 V DC 24 V
−
Internal
SJ-ETHER/SJ
5 to 24 V DC
The photo shows the Japanese model.
Connection Output
(The shape is the same.) L To LED
5 to 24 V DC
Output Specifications Wiring Diagram DL05/06 24 V DC
Common Internal
Connection
Number of Outputs per DL205 L
5 to 24 V DC
16 (Current sinking)
Module
5 to 24 V DC
8 points 1 common x 2 D4
Common
(Internally connected between commons)
Rated Output Voltage 5 to 24 V DC D3
Operating Voltage 4.5 to 26.4 V DC 5 to 24 V DC
Output Type NPN transistor (Open collector) Programmer

Maximum Output Voltage 40 V DC
ON-time Voltage Drop 0.5 V DC (0.5 A), DC 0.2 V (0.1 A) KPP
Maximum Current 0.5 A/point, 3 A/common
24 V DC
Maximum Leakage Current 0.1 mA (40 V DC) DirectSOFT
Maximum Allowable Inrush
2 A (in 10 ms), 1 A (in 100 ms)
Current Terminator I/O
Minimum Load Current 0.2 mA 24 V DC
OFF→ON Response Time 0.5 ms

ON→OFF Response Time 0.5 ms
Fuse 1 unit (5 A)/common, unexchangeable +

Optical Isolation
24 V
Weight 270 g 24 V DC
−
5 to 24 V DC Internal
Connection Output
L To LED
Derating Chart
5 to 24 V DC
Common
20
2.0A Output Current Features

16 0.35 A/point ディレーティング
5 to 24 V DC
12
Output Current 20 Specifications
0.5 A/point
(3 A/common) 2.0A Output Current

8 16 0.35 A/point Dimensions
Output Current
4 12 CPU
0.5 A/point
(3 A/common) Specifications
0 8
Special Module
0 10 20 30 40 50 60 4
24 V DC Ambient Temperature (˚C) Input/Output
0 Module
0 10 20 30 40 50 60 Analog Module
Base Unit
Accessories/
Connector
20
2.0A Output Current

16 0.35 A/point
Output Current
12
0.5 A/point
(3 A/common)
8
251
4 The specifications and prices described in this catalog were valid when the catalog was issued.
0
D4 Series
PLC
HMI
Input/Output Module
SENSOR
ENCODER D4-16TD2
COUNTER
INFORMATION

Common Optical Isolation
Common
Subject Matter
12 to 24 V DC
SJ-ETHER/SJ The photo shows the Japanese model. To LED
(The shape is the same.) 12 to 24 V DC
DL05/06 Output Specifications Wiring Diagram L

Output

16 (Current source)
Module 12 to 24 V DC
Rated Output Voltage 12 to 24 V DC
D3 Operating Voltage 10.2 to 26.4 V DC
12 to 24 V DC
Output Type NPN transistor (Emitter follower)
Programmer Maximum Output Voltage 40 V DC
ON-time Voltage Drop 1.5 V DC (0.5 A)
KPP 0.5 A/point, 3 A/common (50˚C)
Maximum Current
2.5 A/common (60˚C)
DirectSOFT Maximum Leakage Current 0.1 mA (40 V DC)
2 A (in 10 ms), 1 A (in 100 ms)
Terminator I/O Current
Minimum Load Current 0.2 mA
OFF→ON Response Time 1 ms
ON→OFF Response Time 1 ms Equivalent Circuit
Terminal Type Removable 20P terminal block Optical Isolation
Common
Fuse
12 to 24 V DC 1 unit (5 A)/common, unexchangeable
To LED
Weight 280 g 12 to 24 V DC
Output
L
Derating Chart
20
Output Current
12 to 24 V DC
Features 2.0A
16 0.3 A/point
Output Current
Specifications 12 0.35 A/point 20
Output Current Output Current
0.5 A/point 2.0A

Dimensions 8 16 0.3 A/point
(3 A/common)
Output Current
CPU 4 12 0.35 A/point
Specifications
Output Current
0 8 0.5 A/point
Special Module (3 A/common)
0 10 20 30 40 50 60
4
Input/Output Ambient Temperature (˚C)
Module
0
Analog Module 0 10 20 30 40 50 60
Base Unit
Accessories/
Connector
20
Output Current
2.0A
16 0.3 A/point
Output Current
12 0.35 A/point
Output Current
8 0.5 A/point
(3 A/common)
4
252
0 10 20 30 40 50 60
D4 Series
PLC
HMI
Input/Output Module
SENSOR
D4-32TD1 ENCODER
COUNTER
INFORMATION
Common
Subject Matter
The photo shows the Japanese model. Internal Module Circuitry SJ-ETHER/SJ
(The shape is the same.) +V Inte
Optical Isolation +V
Output Specifications Current Flow
Wiring Diagram DL05/06
Current Flow Output
Items Specifications L To LED
Ou
L
Number of Outputs per DL205
24 V DC
Module Common 24 V DC
5 to 24 V DC
Co
Common 8 points 1 common x 4 (Inter-common independence) 5 to 24 V DC D4
Operating Voltage 4.75 to 26.4 V DC D3
Output Type 5 to 24 V DC NPN transistor (Open collector)
5 to 24 V DC
Maximum Output Voltage 36 V DC Programmer
ON-time Voltage Drop 0.6 V DC (0.2 A)
Maximum Current 0.2 A/point, 1.6 A/common KPP
5 to 24 V DC
Maximum Leakage Current 0.1 mA (36 V DC ) 5 to 24 V DC
Maximum Allowable Inrush DirectSOFT

1 A (in 10 ms), 0.5 A (in 100 ms)
Current
24 V DC Terminator I/O
OFF→ON Response Time 0.1 ms 24 V DC

Terminal Type 40-pin connector. A connector is sold separately.
Fuse No
Weight 190 g Equivalent Circuit
The state that is displayed on the front of the module can only be displayed for up to 16 points at a +V
time. If the switch is in the A or B position, the state of the first input point group (16 in total for A0 Optical Isolation
to A7 and B0 toCurrent
B7) Flow
is displayed. If the switch is in the C or D position, the state of the second input
point group (16 in total for C0 to C7 and D0 to D7) is displayed. Output
L To LED
24 V DC
Common
Derating
5 to 24 V DC
Chart ディレーティング
Features
40
40 Specifications
2.0A Output Current

32
5 to 24 V DC 0.1 A/point 2.0A Output Current

32 0.1 A/point Dimensions
24
24 CPU
Output Current Specifications
5 to 24 V DC
16 0.2 A/point Output Current
16 0.2 A/point
8 Special Module
8
Input/Output
0
24 V DC
0 Module
0 10 20 30 40 50 60
0 10 20 30 40 50 60 Analog Module
Base Unit
Accessories/
Connector
40
umber of Outputs Points
2.0A Output Current

32 0.1 A/point
24
Output Current
253
16 0.2 A/point KOYO ELECTRONICS INDUSTRIES CO., LTD.
D4 Series
PLC
HMI
Input/Output Module
SENSOR
■Output Module《DC 32 points》
ENCODER D4-32TD2
COUNTER
INFORMATION
Common
Subject Matter

Output Specifications Wiring Diagram

DL05/06 +V
Current Flow 12 to 24 V
Items Specifications Optical Isolation
Current Flow 12 to 24 V DC
32 (Current source)
Module L
Output
L To LED
Common
Rated Output Voltage 12 to 24 V DC 12 to 24 V DC
12 to 24 V DC
D3 Operating Voltage 10.8 to 26.4 V DC
Output Type PNP transistor (Open collector)
Programmer Maximum Output Voltage 30 V DC 12 to 24 V DC
ON-time Voltage Drop

12 to 24 V DC 0.6 V DC (0.2 A)
KPP Maximum Current 0.2 A/point, 1.0 A/common, 4.0 A/module
Maximum Leakage Current 0.01 mA (26.4 V DC)
12 to 24 V DC
DirectSOFT Maximum Allowable12Inrush
to 24 V DC 500 mA (in 10 ms)
Current
Terminator I/O
External Power Supply 10.8 to 26.4 V DC, 1 A/common (Including the load) 12 to 24 V DC
OFF→ON Response12 Time
to 24 V DC 0.2 ms
Fuse No Internal Module Circuitry
+V
Weight 190 g
The state that isCurrent
displayed
Flow on the front of the module can only be displayed for up to 16 points at a 12 to 24 V DC Optical Isolation
time. If the switch is in the A or B position, the state of the first input point group (16 in total for A0
to A7 and B0 to B7) is displayed. If the switch is in the C or D position, the state of the second input
Output
point group (16 in total for C0 to C7 and D0 to D7) is displayed. L To LED
Common
Features 12 to 24 V DC
Derating Chart
Specifications 40
40
12 to 24 V DC 2.0A Output Current

32 0.2 A/point
Dimensions 2.0A Output Current

32 0.2 A/point (1 A/common)
(1 A/common)24
CPU
Specifications 12 to 24 V DC
24
16
Special Module 16
8
Input/Output 12 to 24 V 8
DC
Module 0
0
Analog Module 0 10 20 30 40 50 60
0 10 20 30 40 50 60 Ambient Temperature (˚C)
Base Unit Ambient Temperature (˚C)
Accessories/
Connector
40
2.0A Output Current

32 0.2 A/point
(1 A/common)
24
16
254
0
D4 Series
PLC
HMI
SENSOR
ENCODER
COUNTER
INFORMATION
Common
Subject Matter
SJ-ETHER/SJ
DL05/06
DL205
D4
D3
Programmer
KPP
DirectSOFT
Terminator I/O
Features
Specifications
Dimensions
CPU
Specifications
Special Module
Input/Output
Module
Analog Module
Base Unit
Accessories/
Connector
255
D4 Series
PLC
HMI
Input/Output Module
SENSOR
■Output Module《DC64》
ENCODER D4-64TD1
COUNTER
INFORMATION
When the External 24 V DC Connector is Used When the 24 V DC Connector is Used When the External 24 V DC Connector and
a 5 to 26 V DC Load Power Source are Used
Current Flow Current Flow Current Flow
Internal Internal Internal

Connection 24 V DC Connection 5 to 26 V DC Connection
Common
Subject Matter

(The shape is the same.) 5 to 26 V DC 5 to 26 V DC
DL05/06 Output Specifications

Items Specifications The state that is displayed on the front of module can be only displayed for up to 32 points at a time.
If the switch is in the A or B position, the state of the first input point group (32 in total for A0 to A17
DL205 Module Mounting Position Dedicated to the CPU base unit*
and B0 to B17) is displayed. If the switch is in the C or D position, the state of the second input point
5 to 26 V DC 5 to 26 V DC
Number of Outputs per Current Flow group (32 in total for C0 to C17 and D0 to D17) is displayed.
D4 Module *1. When the 64-point module is used, a dedicated module or communication module cannot be
8 points 1 common x 8 inserted into slots 5, 6, and 7 of the CPU base unit.
Common
D3 (Internally connected between commons) 2. In the case of the D4-430 and D4-440, the expansion base unit cannot be mounted to the
64-point module.
3. In the case of the D4-450/D4-454, if a D4-□□B-1 is used for both the CPU base and the
Programmer Output Voltage Range 4.75 to 26.5 V DC expansion base, the 64-point module can be also mounted on the expansion base.
Output Type NPN Internal
transistor (Open collector)
Module Circuitry Internal Module Circuitry Internal Module Circuitry
Optical Isolation Optical Isolation Optical Isolation
KPP Maximum Output Voltage 36 V +V
DC +V +V
Output Output Output

ON-time Voltage Drop 0.6
L V DC (0.1 A) L L
To LED To LED To LED
DirectSOFT Maximum Current 0.1 A/point, 1 A/common, 7 A/module total 5 to 26 V
DC
24 V DC
Maximum Leakage Current 0.01 Common
mA (36 V DC ) Common Common
Terminator I/O Maximum Allowable Inrush

External 24 V DC + + External 24 V DC +
1 A (in
− 1 ms)700 mA (in 100 ms) External 24 V DC − −
Current
External Power Supply 24 V DC ±10% (850 mA/common), up to 7.0 A/total
OFF→ON Response Time 0.1 ms
ON-time Voltage Drop 1.5 V AC (2 A)
Fuse No
Weight 210 g
Features
Derating Chart
Specifications 80
2.0A
Dimensions 64
CPU 48
Specifications
Output Current
32
0.1 A/point
Special Module
16
Input/Output
Module 0
Analog Module 0 10 20 30 40 50 60
Base Unit
Accessories/
Connector
256
D4 Series
PLC
HMI
Input/Output Module
SENSOR
ENCODER
COUNTER
INFORMATION
Common
Subject Matter
SJ-ETHER/SJ
Wiring Diagram DL05/06
a 5 to 26 V DC Load Power Source are Used
DL205
Current Flow Current Flow Current Flow D4

Internal Internal a 5 to 26 V DC Load Power Source are Used
Internal
Connection 24 V DC Connection 5 to 26 V DC Connection
D3
Current Flow
Current Flow Current
Current Flow
Flow Current
Current Flow
Flow
Internal Internal Internal Programmer
Connection 5 to24
26VVDC
DC Connection 5 to526
to V26DC
V DC Connection
Current Flow
KPP
Current
Current Flow
Flow Current Flow Current Flow
Current Flow
DirectSOFT
Current Flow
Terminator I/O
Current Flow
Equivalent
+V
CircuitOptical Isolation
Internal Module Circuitry Internal Module Circuitry
+V
Optical Isolation
+V
Optical Isolation
When
L theOutput
External 24 V DC Connector is Used When the
L 24Output
V DC Connector is Used When the External
L
Output
24 V DC
Connector and
To LED To LED
a 5 to 26 V DC Load Power Source are Used To LED
5 to 26 V
Internal Module Circuitry 24 V DC Internal Module Circuitry DC Internal Module Circuitry
+V
Common +V
Common +V
Common
Current Flow+ Output Current Flow Current Flow
External 24 V DC + Output External 24 V DC + Output
L L L
− Internal To LED External 24 V DC − Internal To LED − Internal To LED
Connection 24 V DC Connection 5 to 26 V DC 5 to 26 V Connection
24 V DC DC
Common Common Common
Features
Current
External Flow
24 V DC + Current Flow + Current24
External Flow
V DC +
− External 24 V DC −
− Specifications
Current Flow Current Flow Current Flow Dimensions
CPU
Specifications
Current Flow
Special Module
Input/Output
Module
80 Analog Module
Internal Module Circuitry Internal Module Circuitry Internal Module Circuitry

2.0A
+V +V +V
64 Base Unit
Output Output Output
L L L
80
48 To LED To LED
5 to 26 V
To LED
Accessories/
Connector
24 V DC DC
2.0A
Common Output Current Common Common
3264
External 24 V DC + 0.1 A/point + External 24 V DC +
− External 24 V DC − −
1648
Output Current
032 0.1 A/point
16 0 10 20 30 40 50 60
0
0 10 20 30 40 50 60
257
80
D4 Series
PLC
HMI
Input/Output Module
SENSOR
■Output Module《AC 8 Points》
ENCODER D4-08TA
COUNTER
INFORMATION
Common Internal Module Circuitry
Subject Matter L
Output
Optical Isolation
18 to
220 V AC
(The shape is the same.) 18 to 220 V AC
To LED
Output Specifications Wiring Diagram

Common L
DL05/06
18 to
Items Specifications 18 to 220 V AC
220 V

8
Module
D4 Common 18 to 220 V AC 4 points 1 common x 2 (Inter-common independence)
Rated Output Voltage 18 to 220 V AC
D3 Operating Voltage 15 to 265 V AC
Output Type SSR (Triac) 18 to 220 V AC
Programmer Maximum Output Voltage 265 V AC

AC Frequency 47 to 63 Hz
KPP ON-time Voltage Drop 1.5 V AC (2 A)
Maximum Current 2 A/point, 5 A/common (30˚C), 2 A/common (60˚C)
DirectSOFT Maximum Leakage Current 5 mA (265 V AC 60Hz)
Maximum Allowable Inrush 30 A (in 10 ms)
Terminator I/O Current 10 A (in 100 ms)
Minimum Load Current 10 mA
ON→OFF Response Time 1 ms + 1/2 cycle Equivalent Circuit
Terminal Type Removable 11P terminal block Internal Module Circuitry
Output
Status Display Logic side L Optical Isolation
Fuse 1 unit (8 A)/common, unexchangeable 18 to

220 V AC
Weight
18 to 220 V AC 330 g To LED
Common
Derating Chart
10
Features
18 to 220 V AC 8
2.0A Output Current
0.5 A/point
Specifications 10
6
2.0A Output Current

Output Current 8
Dimensions 4 0.5 A/point
1 A/point
6
CPU 2 Output Current
Specifications 2 A/point Output Current
(5 A/Common) 4 1 A/point
0
Special Module
0 10 20 30 40 50 60 2 Output Current
2 A/point
Input/Output Ambient Temperature (˚C) (5 A/Common)
Module 0
Analog Module 0 10 20 30 40 50 60
Base Unit
Accessories/
Connector
10
2.0A Output Current

8 0.5 A/point
Output Current
4 1 A/point
2 Output Current
258
2 A/point
(5 A/Common)
Latest catalog (free) is available online.
0 10 20 30 40 50 60
D4 Series
PLC
HMI
Input/Output Module
SENSOR
■Output Module《AC 16 Points》
D4-16TA ENCODER
COUNTER
INFORMATION

Common
L
Output
Optical Isolation Subject Matter
18 to
18model.
The photo shows the Japanese to 220 V AC
220 V AC SJ-ETHER/SJ
To LED
Output Specifications Wiring Diagram

Common
DL05/06
18
Items Specifications 18 to 220 V AC
22

16
Module
Common18 to 220 V AC 8 points 1 common x 2 (Inter-common independence) D4
Rated Output Voltage 18 to 220 V AC
Operating Voltage 15 to 265 V AC D3
Output Type SSR (Triac) 18 to 220 V AC
Maximum Output Voltage 265 V AC Programmer
ON-time Voltage Drop 1.5 V AC (0.5 A 63Hz) KPP
Maximum Current 0.5 A/point, 3 A/common (45˚C), 2 A/common (60˚C)
Maximum Leakage Current 4 mA (265 V AC) DirectSOFT
Maximum Allowable Inrush 15 A (in 10 ms)
Current 10 A (in 100 ms) Terminator I/O
Minimum Load Current 10 mA
ON→OFF Response Time 1 ms + 1/2 cycle
Fuse 1 unit (5 A)/common, unexchangeable L
Output
Optical Isolation
Weight 350 g
18 to
18 to 220 V AC
220 V AC
To LED
Derating Chart Common
20
Features
16
2.0A Output Current
0.25 A/point ディレーティング
18 to 220 V AC 12
20 Specifications
Output Current
0.35 A/point 2.0A Output Current

16
8 Output Current 0.25 A/point Dimensions
0.5 A/point
2 A/common 12 Output Current CPU
4
3 A/common 0.35 A/point Specifications
8 Output Current
0
0.5 A/point Special Module
0 10 20 30 40 50 60 4 2 A/common
3 A/common
Ambient Temperature (˚C) Input/Output
0 Module
0 10 20 30 40 50 60 Analog Module
Base Unit
Accessories/
Connector
20
2.0A Output Current

16 0.25 A/point
12 Output Current
0.35 A/point
8 Output Current
259
0.5 A/point
4 2 A/common
3 A/common GENERAL CATALOG 2018
0
D4 Series
PLC
HMI
Input/Output Module
SENSOR
■Output Module《Relay 8 Points》
ENCODER D4-08TR
COUNTER
INFORMATION
Common
Subject Matter

DL05/06 Output Specifications Wiring Diagram

5 to 30
DL205 Number of Outputs per DC/
Relay 8 units 5 to 25
Module AC
D4 Common 4 points 1 common x 2 (Inter-common independence) Internal Module Circuitry L
Operating Voltage 5 to 30 V DC/5 to 250 V AC

D3 Output Type a-contact (SPST-NO) Common To LED
5 to 30 V DC/
Maximum Output Voltage 30 V DC/256 V AC 5 to 250 V AC 5 to 30 V
DC/
Programmer AC Frequency 47 to 63 Hz 5 to 250 V
AC
ON-time Voltage Drop Not applicable L
Output
Relay
KPP Maximum Current 2 A/point, 5 A/common
Maximum Leakage Current 0.1 mA (265 V AC)
5 to 30 V DC/
5 to 250 V AC 2A
Current
Terminator I/O Minimum Load Current 5 mA
ON→OFF Response Time 12 ms
Equivalent Circuit
Fuse 1 unit (8 A)/common, unexchangeable
Common To LED
Weight 260 g
5 to 30 V
DC/
5 to 250 V
Standard Relay Life (Operation)

AC
Output
L Relay
Maximum Resistance or Operating Voltage
Inductive Inrush Load
Current 30 V DC 120 V AC 250 V AC
Features 5 to 30 V DC/
5 to 2502VAAC
Resistance 100 k 300 k 200 k ディレーティング
2 A Induction 100 k 80 k 60 10
k
Specifications
0.5 A Resistance 800 k 1M 800 k
2.0A Output Current

0.5 A Induction 300 k 300 k 200 k8 1.25 A/point
Dimensions
6 Output Current
CPU
Specifications
Derating Chart 2 A/point
4 (5 A/Common)
10
Special Module
2.0A Output Current 2

8 1.25 A/point
Input/Output
Module 0
6 Output Current
2 A/point 0 10 20 30 40 50 60
Analog Module
4 (5 A/Common)
Base Unit 2
Accessories/
0
Connector
0 10 20 30 40 50 60
10
2.0A Output Current

8 1.25 A/point
6 Output Current
2 A/point
4 (5 A/Common)
260
0 Visit our website ▼
0 10 20 30 40 50 60
D4 Series
PLC
HMI
Input/Output Module
SENSOR
F4-08TRS-1 ENCODER
COUNTER
INFORMATION
Common
Subject Matter
The photo shows the F4-08TRS-2. SJ-ETHER/SJ
(The shape is the same.) Common 10 A
Output Specifications Wiring Diagram DL05/06

NO
Items Specifications L

L
NC
Relay 8 units
Module Example of Rela

12 to 30 V DC/12 to 250 V AC, Common
10 A
Operating Voltage
* 125 to 250 V AC D3
Output Type c-contact (SPST) x 4, a-contact (SPST-NO) x 4
Common 10 A
Maximum Output Voltage 30 V DC/250 V AC (10 A) Programmer
NO
L
NO Example of Rela
ON-time Voltage Drop Not applicable L KPP
NC
Maximum Current 10 A/point, 40 A/module L
Maximum Leakage Current Not applicable Example of Relay Output Circuit (1/4) DirectSOFT
10 A
Current Common
10 A
Terminator I/O
Minimum Load Current 100 mA (12 V DC)
ON→OFF Response Time 9 ms NO
Terminal Type Removable 20P terminal block Equivalent CircuitL

Example of Relay Output Circuit (1/4)
Status Display Logic side Common 10 A
Weight 374 g
NO
L
* The standard maximum DC voltage rating is 120 V DC (0.5 A, 30,000 cycle). This module supports
NC
motor starters of sizes not larger than NEMA size 4. L
Standard Relay Life (Operation)

Common Features
10 A
Maximum Resistance or Operating Voltage
Inductive Inrush Load
250 Specifications
NO
1/4 HP 25 k 2.0A Output Current
8 L
5 A/point Dimensions
10.0 A 50 k 50 k Example of Relay Output Circuit (1/4)
5.0 A 200 k 100 k 6 CPU

3.0 A 325 k 125 k 50 k Output Current Specifications
0.05 A > 50 M 4 10 A/point
(40 A/module) Special Module
2
Derating Chart Input/Output
0 Module
10
0 10 20 30 40 50 60 Analog Module
2.0A Output Current

8 5 A/point Ambient Temperature (˚C)
Base Unit
6
Output Current Accessories/
4 10 A/point Connector
(40 A/module)
2
0 10 20 30 40 50 60
10
2.0A Output Current

8 5 A/point
6
Output Current
4 10 A/point
(40 A/module)
261
0
D4 Series
PLC
HMI
Input/Output Module
SENSOR
ENCODER F4-08TRS-2
COUNTER
INFORMATION
Common
Subject Matter
SJ-ETHER/SJ Common
DL05/06 Output Specifications Wiring Diagram

NO
L
NC
DL205 Number of Outputs per L
Relay 8 units
Module Example

Operating Voltage 12 to 30 V DC /12 to 250 V AC Common 10 A Common
D3 Output Type c-contact (SPDT) x 4, a-contact (SPST-NO) x 4

Maximum Output Voltage 30 V DC/250 V AC (5 A) NO
L
Programmer AC Frequency 47 to 63 Hz NC NO
L L
ON-time Voltage Drop Not applicable Example of Relay Output Circuit (1/4) Example
KPP Maximum Current 5 A/point, 40 A/module
Maximum Leakage Current Not applicable
Common 10 A
10 A
Current
Terminator I/O Minimum Load Current 100 mA (12 V DC)
NO
OFF→ON Response Time 7 ms L
ON→OFF Response Time 9 ms Example of Relay Output Circuit (1/4)

Status Display Logic side Common 10 A
Fuse 19379-K Wickman 1 unit (10 A 250 V)/common, replaceable

Weight 390 g NO
L
The standard maximum DC voltage rating is 120 V DC (0.5 A, 30,000 cycle). This module supports
NC
motor starters of sizes not larger than NEMA size 4. L
Standard Relay Life (Operation) Common 10 A
Features Maximum Resistance or Operating Voltage

Inductive Inrush Load ディレーティング
Specifications 10 NO
5.0 A 200 k 100 k L
2.0A Output Current

3.0 A 325 k 125 k 8 50 k Example of Relay Output Circuit (1/4)
5 A/point
Dimensions
0.05 A > 50 M (40 A/module)
6
CPU
Specifications
Derating Chart 4
Special Module
10 2
Input/Output 2.0A Output Current

Module 8 5 A/point0
(40 A/module)
Analog Module 6 0 10 20 30 40 50 60
4
Base Unit
Accessories/ 2
Connector
0
0 10 20 30 40 50 60
10
2.0A Output Current

8 5 A/point
(40 A/module)
6
262
2
0 http://www.koyoele.co.jp/english/
0 10 20 30 40 50 60
D4 Series
PLC
HMI
Input/Output Module
SENSOR
D4-16TR ENCODER
COUNTER
INFORMATION
Common
Subject Matter
Output Specifications Wiring Diagram DL05/06

Number of Outputs per CA DL205
Relay 16 units L 0
Module L 4
Common 8 points 1 common x 2 (Inter-common independence) L 1 D4

L 5
Operating Voltage 5 to 30 V DC/5 to 250 V AC L 2
L 6
Output Type a-contact (SPST-NO) L 3 D3
L 7
Maximum Output Voltage 30 V DC/250 V AC 5 to 30 V DC/5 to 250 V AC + --
CB
Common To LED
AC Frequency 47 to 63 Hz L 4 Programmer
CA 5 toL30 V 0
ON-time Voltage Drop L Not applicable
0 L
DC/
5 to 250 V 5
AC L
Maximum Current L 4
1 A/point, 51 A/common 1
KPP
L L
Output 6
L
Maximum Leakage Current 0.1L mA (265 V AC)5 L 2 Relay
L 2 L 7
Maximum Allowable Inrush L 6 L 3 DirectSOFT
4A
Current L 3
L 7
5 to 30 V DC/5 to 250 V AC +
Minimum Load Current 5-- mA CB Terminator I/O
L 4
OFF→ON Response Time 10L ms 0
L 5
ON→OFF Response Time 10L ms 1
Terminal Type L Removable 20P terminal
L 2
6 block Equivalent Circuit
Status Display L Logic side 7 Internal Module Circuitry
L 3
Weight 310 g
Common To LED
CA 5 to 30 V
DC/
Standard Relay
0
Life (Operation)
L
5 to 250 V
4 L AC
L 1 Output
Maximum L Resistance or5 Operating Voltage L Relay
Inductive
L
L
Inrush2Load
6
Current 3 30 V DC 120 V AC 250 V AC
L
Features
1 VAAC
5 to 30 V DC/5 to 250 Resistance
+ --
L
CB
7
>1M 500 k 300 k ディレーティング
1 A Induction
L 4 400 k 200 k 100 k Specifications
L 0 20
0.5 ALResistance 5 >2M 800 k 500 k
L
0.5 ALInduction 1
>1M 300 k 200 k 2.0A Output Current
6 16 0.6 A/point Dimensions
L 2
L 7
L 3 12 Output Current CPU
1 A/point Specifications
Derating Chart 8 (5 A/common)
Special Module
20 4
Input/Output
2.0A Output Current Module

16 0.6 A/point 0
12 0 10 20 30 40 50 60 Analog Module
Output Current
1 A/point Ambient Temperature (˚C)
8 (5 A/common) Base Unit
4 Accessories/
Connector
0
0 10 20 30 40 50 60
20
2.0A Output Current

16 0.6 A/point
12 Output Current
1 A/point
8 (5 A/common)
263
4
0 10 20 30 40 50 60
D4 Series
PLC
HMI
Analog Module
SENSOR
■Input Module《4 Channels》
ENCODER F4-04AD
COUNTER
INFORMATION
Common
Subject Matter

DL05/06 Input Specifications Wiring Diagram

Items Specifications See Note 1
DL205 Number of Channels 4 V
1 Channel Single-ended + C
Single end (Non-balanced-type), derivative voltage or (Non-balanced-type)

I 250
Input Type Voltage Transmitter --
See Note 3
D4 current OV
A/D
V
0 to 5 V, 1 to 5 V, 0 to 10 V, ±5 V, ±10 V,
Converter
+ C
2 Channel Differential
Input Range Voltage Transmitter OV I 250
D3
+
0 to 20 mA, 4 to 20 mA --
Analog Switch
OV --
V
The range is selected as common for all channels.
Individually Configurable 3 Channel Differential
+ C
0V
Programmer Each channel can be wired as voltage or current Current Transmitter OV I 250
Channel --
input. OV
V
KPP
--
12-bit (0 to 4095) unipolar, 4 Channel 2-wire
C
Resolution Current Transmitter I 250

13-bit (-4095 to +4095) bipolar +
OV
DirectSOFT Conversion Method Integration method

Minimum 20 MΩ: Voltage input, 250 Ω: 1/2 W, User Power Supply Ch annel select
Input Impedance Return
Terminator I/O ±0.1%, 25 ppm/˚C, current input + --
21.6 to 26.4 V DC
Maximum Continuous User Power Supply
±50 V DC (Voltage input), ±45 mA (Current input)

Class 2 OV
Overload C
V
Recommended Fuse 0.32 A, series 217, fast-blow, current input Wiring for unused channels
(See Note 2)
I
0V
Common Mode Voltage

Maximum ±10 V
Range
Linearity ±0.025% of span (±1 count maximum, unipolar)
Input Stability ±1/2 count
Crosstalk -80 dB, maximum 1/2 count
Maximum ±12 count (Voltage input),
Full Scale Error
Maximum ±16 count (20.0 mA current input)
Offset Error
Maximum ±1 count (Voltage input), ディレーティング
Features Maximum ±2 count (4.0 mA current input)
10
Up to 0.4%: 25˚C
Maximum Error
Specifications Up to 0.55%: 0 to 60˚C 2.0A Output Current

8 1.25 A/point
Conversion Time < 6 ms (Per selected channel)
Dimensions Normal mode: -3 dB (50 Hz), -6 dB/ octave 6 Output Current
Noise Resistance 2 A/point
Common mode: -70 dB, DC to 12 kHz
CPU 4 (5 A/common)
Analog Data Update Minimum 1 channel, maximum 4 channels per scan
Specifications
Input 16 points (I) (Binary data bit x 12, channel ID bid
2
Special Module x 2, Sign bit x 1, transmitter trouble indication bit x 1)
Number of Occupied Inputs
Optionally, the 32iinput point operation of the U-01AD
compatibility mode is supported. 0
Input/Output
Module Accuracy Against ±45 ppm/˚C, Full-scale change 0 10 20 30 40 50 60
Temperature (Including 2 counts for the maximum offset change) Ambient Temperature (˚C)
Analog Module
Insulation Resistance 10 MΩ, 500 V DC
Base Unit
Weight 290 g
Accessories/ Note 1: Shields should be grounded on the signal source sides.
Connector Note 2: The shied should be grounded on the signal source side.
Note 3: To maximize noise resistance, unused channels should be short-circuited.
264
D4 Series
PLC
HMI
Analog Module
SENSOR
F4-04ADS ENCODER
COUNTER
INFORMATION
Common
Subject Matter
SJ-ETHER/SJ
Input Specifications (Isolation Specifications) Wiring Diagram DL05/06

Items Specifications Internal Module Circuitry
Number of Channels 4 See Note 1 DL205

V
0 to 5 V, 0 to 10 V, 1 to 5 V, ±5 V, ±10 V, 1 Channel + C
Input Range
0 to 20 mA, 4 to 20 mA Voltage Transmitter -- D4
25 0
R
Individually Configurable V
Possible
D3
C
Channel 2 Channel
See Note 2 R
A/D
Converter
Not used (CH 2 is not used.)
25 0
Resolution 12-bit
Analog Switch
V
Conversion Method Successive approximation system 3 Channel + C Programmer
2-wire 4 to 20 mA R
Input Type Differentiation
25 0
--
Transmitter
Maximum Common Mode V KPP

±750 V peak continuous transformer separation 4 Channel + C
Voltage 2-wire 4 to 20 mA R 25 0
Transmitter --
Noise Resistance Common-mode signal: -100 dB (60 Hz) DirectSOFT
Active Low-pass Filtering -3 dB (20 Hz), -12 dB per octave
250 Ω ±0.1%, 1/2 W (Current input), Terminator I/O
Input Impedance User Power Supply + --
200 kΩ (Voltage input) +21.6 to 26.4 V DC
-45 mA to +45 mA (Current input),

Absolute Maximum Rating
±100 V (Voltage input)
Conversion Time 1 ms per selected channel
Linearity Error : Unipolar Maximum ±1 count (0.025% of full scale)
: Bipolar Maximum ±2 count (0.025% of full scale)
Full Scale Error Maximum ±8 count (Vin = 20 mA)
Offset Error Maximum ±8 count (Vin = 4 mA)
Analog Data Update 1 channel per scan
Input 16 points (I) (Binary data bit x 12,
active channel ID bid x 4)
Recommended Fuse 0.032 A, series 217, fast-blow, current input Features
Operating Temperature 0˚C to 60˚C
ディレーティング Specifications
Accuracy Against Maximum ±100 ppm/˚C full-scale
Temperature (Including maximum offset) 20
Weight 323 g Dimensions
2.0A Output Current

16 0.6 A/point
"1 count" in the specifications table is equivalent to 1 least significant bit of the analog data value.
Note 1: Shields should be grounded on the signal source sides. CPU
12 Specifications
Note 2: Regarding unused channels, jumpers should be attached to the "V", "C", and "R" channels. Output Current
1 A/point
8 (5 A/common) Special Module
4 Input/Output
Module
0
Analog Module
0 10 20 30 40 50 60
Ambient Temperature (˚C) Base Unit
Accessories/
Connector
265
D4 Series
PLC
HMI
Analog Module
SENSOR
ENCODER F4-08AD
COUNTER
INFORMATION
Common
Subject Matter


DL205 Number of Channels 8, single end (Non-balanced-type) (Common x 1)
0 to 5 V, 0 to 10 V, 1 to 5 V, ±5 V, ±10 V,
Input Range See Note 1
D4 0 to 20 mA, 4 to 20 mA CH 1
1 Channel + CH 1
IN 250
Voltage
Individually Configurable Not possible. Separate channels can be configured by Transmitter --
0V
CH 2
IN 250
D3 Channel current or voltage, but the range must be the same. 2 Channel +
CH 2
0V
CH 3
Voltage
Resolution 12-bit Transmitter -- CH3 CH 3
0V
IN 250 A/D
Converter
CH 4
Programmer Conversion Method Successive approximation system
Analog Switch
IN 250
CH4 CH 4
0V
Active Low-pass Filtering -3 dB (20 Hz), -12 dB per octave 3 to 6 Channel
Not used CH5
CH 5
IN 250
CH 5
KPP 250 Ω±0.1%, 1/2 W (Current input),

0V
CH 6
Input Impedance CH6 IN 250

> 20 MΩ (Voltage input, minimum 1 MΩ) CH 6
0V
CH 7
--
DirectSOFT -45 mA to +45 mA (Current input),
7 Channel
2-wire 4 to 20mA
CH 7
IN 250
Absolute Maximum Rating Transmitter + 0V

CH 8
-75 V to +75 V (Voltage input) CH 8
IN 250
8 Channel +
Terminator I/O
0V
0.4 ms per channel (Module conversion), 3-wire 4 to 20mA

--
Conversion Time Transmitter
minimum 1 ms per selected channel (CPU) + Jumpers for 5 Channel,

24V 7 & 8 Channelare installed.
Linearity Error (End-to-end) Maximum ±1 count (0.025% of full scale) External
Power Supply
--
+ -- 0V
±1/2 count
(Option)
Input Stability
(24 V DC Standard)
±12 count (Voltage input) 18 to 30 V DC 0V

Full Scale Error
Maximum ±12 count (20 mA current input)
Maximum ±2 count (Unipolar voltage input)
Offset Error Maximum ±4 count (Bipolar voltage input)
Maximum ±4 count (4 mA current input)
active channel bid x 3, unused bit x 1)
Features Recommended Fuse 0.032 A, series 217, fast-blow, current input
Operating Temperature 0˚C to 60˚C
Specifications Accuracy Against Maximum ±50 ppm/˚C full scale
Temperature (Including 2 counts for the maximum offset change) ディレーティング
Dimensions Terminal Type Removable 20P terminal block 10
Weight 290 g
CPU 2.0A Output Current

"1 count" in the specifications table is equivalent to 1 least significant bit of the analog data value. 8
Specifications 1.25 A/point
Note 1: Shields should be grounded on the signal source sides.
Note 2: The unused channels should be connected or current jumpers should be attached to them. 6 Output Current
Special Module
Several external power sources can be used. (See channel 8.) When a 4 to 20 mA current 2 A/point
loop is used, it is recommended to use a 217 series 0.032 A, fast-blow fuse. 4 (5 A/common)
Input/Output
If the power source common of the external power source is not connected to the 0 V DC
Module
of this module, be sure to isolate the output of the external transmitter. To prevent a "grand 2
loop" error, it is recommended to use the following types as a 4 to 20 mA transmitter.
Analog Module
2-wire system or 3-wire system: One in which the input signal is isolated from the power
0
source.
Base Unit 4-wire system: One in which the input signal, power source, and 4 to 20 mA output are 0 10 20 30 40 50 60
isolated from one another. Ambient Temperature (˚C)
Accessories/
Connector
266
D4 Series
PLC
HMI
Analog Module
SENSOR
F4-16AD-1 ENCODER
COUNTER
INFORMATION
Common
Subject Matter
The photo shows the F4-04ADS. SJ-ETHER/SJ

DL205
Number of Channels 16, single end (Non-balanced-type) (Common x 1)
Input Range 0 to 20 mA, 4 to 20 mA
See Note 1
Individually Configurable Not possible. Separate channels can be configured by 1 Channel

CH 1
D4
25 0
2-wire 4 to 20 mA CH 2
Channel current or voltage, but the range must be the same. Transmitter CH 3
25 0
Resolution 12-bit 3 Channel
CH 4
D3
CH 5
2-wire 4 to 20 mA
Active Low-pass Filtering -3 dB (20 Hz), -12 dB per octave Transmitter CH 6
CH 7
250 Ω±0.1%, 1/2 W (Current input), Programmer
Converter
Input Impedance CH 8
A/D
> 20 MΩ (Voltage input, minimum 1 MΩ) CH 9
CH 10
-45 mA to +45 mA (Current input), CH 11 KPP

Absolute Maximum Rating 11 Channel
-75 V to +75 V (Voltage input) 2-wire 4 to 20 mA
Transmitter
CH 12
CH13
25 0
Conversion Time 2 ms per channel (Module conversion) CH 14 DirectSOFT

Maximum ±2 count (0.025% of full scale)
CH 15
Linearity Error (End-to-end) CH 16
±1 count
16 Channel
Input Stability 2-wire 4 to 20 mA 24 V Terminator I/O
Transmitter 25 0
Maximum ±12 count (20 mA current input, the 0V
Full Scale Error

erroneous offset is not included.)
+ --
Offset Error Maximum ±3 count (4 mA current input)
Analog Data Update Minimum 1 channel, maximum 16 channels per scan 24 V DC
0V

active channel bid x 4)
Recommended Fuse 0.032 A, series 217, fast-blow, current input
Accuracy Against Maximum ±50 ppm/˚C full scale
Temperature (Including 2 counts for the maximum offset change)
Weight 329 g
"1 count" in the specifications table is equivalent to 1 least significant bit of the analog data value. Features
Note 1: Shields should be grounded on the signal source sides. When a 4 to 20 mA current loop is
used, it is recommended to use a 217 series 0.032 A, fast-blow fuse. Specifications
If the power source common of the external power source is not connected to the 0 V DC ディレーティング
of this module, be sure to isolate the output of the external transmitter. To prevent a "grand
loop" error, it is recommended to use the following types as a 4 to 20 mA transmitter. 20 Dimensions
2-wire system or 3-wire system: One in which the input signal is isolated from the power
source. 2.0A Output Current CPU

16
4-wire system: One in which the input signal, power source, and 4 to 20 mA output are
0.6 A/point Specifications
isolated from one another. 12 Output Current Special Module
1 A/point
8 (5 A/common) Input/Output
Module
4
Analog Module
0
0 10 20 30 40 50 60 Base Unit
Accessories/
Connector
267
D4 Series
PLC
HMI
Analog Module
SENSOR
ENCODER F4-16AD-2
COUNTER
INFORMATION
Common
Subject Matter
SJ-ETHER/SJ The photo shows the F4-04ADS.

DL205
Number of Channels 16, single end (Non-balanced-type) (Common x 1)
Input Range 0 to 5 V, 0 to 10 V
See Note 1
D4 Individually Configurable Not possible. Separate channels can be configured by CH 1
1 Channel +
Channel current or voltage, but the range must be the same.
CH 2
Voltage
Transmitter -- CH 3
D3 Resolution 12-bit +
CH 4
3 Channel CH 5
Active Low-pass Filtering -3 dB (20 Hz), -12 dB per octave Voltage

Transmitter -- CH 6
Programmer
CH 7
Input Impedance Minimum 1 MΩ
Analog Switch
CH 8
Absolute Maximum Rating 130 V AC, 100 V DC 0V
KPP 0.4 ms per channel (Module conversion), 0V

CH 9
Conversion Time
minimum 2 ms per selected channel (CPU) CH 10
CH11
DirectSOFT Linearity Error (End-to-end) Maximum ±2 count (0.050% of full scale) 1 Channel
Voltage
--
CH 12
Transmitter +
±1 count
CH13
Input Stability CH 14
3 Channel +
Terminator I/O ±12 count (Voltage input, the erroneous offset is not Voltage
--
CH15
Full Scale Error Transmitter

CH16
included.)
Maximum ±3 count (Unipolar voltage input)
24 V
Offset Error + -- 0V

Input 16 points (I) (Binary data bit x 12, 24 V DC 0V
Active channel bid x 4)
Accuracy Against Maximum ±50 ppm/˚C full scale
Weight 326 g
Note 1: Shields should be grounded on the signal source sides. Several external power sources
Features can be used. (See channel 8.) If the power source common of the external power source
is not connected to the 0 V DC of this module, be sure to isolate the output of the external
transmitter.
Specifications
Dimensions
10
CPU 2.0A Output Current

8
Specifications 1.25 A/point
Special Module 6 Output Current

2 A/point
4 (5 A/Common)
Input/Output
Module
2
Analog Module
0
Base Unit 0 10 20 30 40 50 60
Accessories/
Connector
268
D4 Series
PLC
HMI
Analog Module
SENSOR
■Output Module《4 Channels》
F4-04DA-1 ENCODER
COUNTER
INFORMATION
Common
Subject Matter
The photo shows the F4-16DA-1.
SJ-ETHER/SJ

Items Specifications Typical User Wiring
Number of Channels 4, single end (Common x 1) See Note 1 DL205
Output Range 4 to 20 mA current Internal Module Circuitry
CH1 + I
Resolution 12-bit 1 Channel
Current
4 to 20 mA Current Sink
D4
Output
0 to 1 kΩ D /A
Output Type Output sink, 4 to 20 mA (From external power supply) CH 1 --I
External Load Resistance Minimum 0 Ω CH 2+ I D3

Current
2 Channel 4 to 20 mA Current Sink
Maximum Loop Power 0 to 1 kΩ
Output D /A
30 V DC CH 2 --I
Supply Programmer
CH 3+ I
Maximum Output Voltage 40 V DC (Fixed, transient suppressor) 3 Channel
Current
4 to 20 mA Current Sink
Output D /A
Maximum Load/Power
0 to 1 kΩ
CH 3 --I KPP
620 Ω/18 V, 910 Ω/24 V, 1,200 Ω/30 V
Supply CH 4+ I
Linearity Error (Fit) Maximum ±1 count (±0.025%) 4 to 20 mA Current Sink

D /A DirectSOFT
Maximum ±5 count
CH 4 --I
Gain Error 4 Channel
Current
Output
0 to 1 kΩ
Offset Error Maximum ±3 count Terminator I/O
±0.1%: 25˚C 24 V
Maximum Error Internal DC/DC

Maximum ±0.3%: 0 to 60˚C Converter
0V
Maximum 100 μs(Settling time), + -- + --

Conversion Time
Maximum 2.0 ms (Digital output → Analog output) 18 to 30 V DC
User Second
User Power Supply
+21.6 to 26.4 V DC
Power Supply
75 mA
Number of Occupied Output 16 points (Q) (Binary data bit x 12, (Optional)
Outputs Active channel bid x 4) 20 mA is Added for

Each 4 to 20 mA Loop Fed
by the Module.
Accuracy Against ±57 ppm/˚C full-scale
Weight 268 g
Note 1: Regarding the shield, the "0 V" of the user power supply should be connected to the module Features
terminal block.
Note 2: The unused current output should be left open (unconnected).
Specifications
10 Dimensions
2.0A Output Current

8 CPU
1.25 A/point
Specifications
6 Output Current
Special Module
2 A/point
4 (5 A/common)
Input/Output
Module
2
Analog Module
0
0 10 20 30 40 50 60 Base Unit
Accessories/
Connector
269
D4 Series
PLC
HMI
Analog Module
SENSOR
ENCODER F4-04DA-2
COUNTER
INFORMATION
Common
Subject Matter
SJ-ETHER/SJ The photo shows the F4-16DA-1.


Items Specifications See Note 1
User Wiring
DL205 Number of Channels 4 (Single end), common x 1 Internal Module Circuitry
Output Range 0 to 5 V, 0 to 10 V, ±5 V, ±10 V

D4 Individually Configurable Voltage Sink/Source
Possible
CH 1+V
Voltage D /A
Channel 1 Channel
2 kΩ Output
Minimum CH 1 --V
D3 Resolution 12-bit
Voltage Sink/Source
Load impedance Minimum 2 kΩ 2 Channel Voltage
CH 2+V
D /A
Output
Programmer
2 kΩ
Load Capability Maximum 0.01 μF Minimum CH 2 --V
Voltage Output Current 5.0 mA sink or source CH 3+V Voltage Sink/Source

D /A
KPP 3 Channel Voltage
Short-circuit Current Standard 15 mA 2 kΩ Output
Minimum CH 3 --V
Linearity Error (End-to-end)
Maximum ±1 count (±0.025%)
DirectSOFT and Relative Accuracy 4 Channel Voltage
CH 4+V Voltage Sink/Source
D /A
2 kΩ Output
Maximum ±3 count (Unipolar), Minimum CH 4 --V
Offset Error
Terminator I/O Maximum ±4 count (Bipolar) 24 V
Full Scale Error Maximum ±8 count (Including erroneous offset) Internal DC/DC
Converter
±0.2%:25˚C
0V
Maximum Error + --
±0.4%:0 to 60˚C
21.6 to 26.4 V DC
Maximum 5 μs (Settling time), 90 mA
Conversion Time
Maximum 0.2 ms (Digital output → Analog output)
Output 16 points (Q) (Binary data bit x 12, active
Number of Occupied
channel bid x 4 or active channel bid x 2 and Sign bit
Outputs
x 1 (Bipolar))
Features Weight 271 g
Specifications Note 1: Regarding the shield, the "0 V" of the user power supply should be connected to the module ディレーティング
terminal block.
Note 2: The unused current output should be left open (unconnected). 20
Dimensions
2.0A Output Current

16 0.6 A/point
CPU
Specifications
12 Output Current
Special Module 1 A/point
8 (5 A/common)
Input/Output
Module 4
Analog Module 0
0 10 20 30 40 50 60
Base Unit Ambient Temperature (˚C)
Accessories/
Connector
270
D4 Series
PLC
HMI
Analog Module
SENSOR
■Output Module《8 Channels･16 Channels》
F4-08DA-1 F4-16DA-1 ENCODER
COUNTER
INFORMATION
Common
Subject Matter
A cover is available. A cover is available.
The photo shows the F4-16DA-1. SJ-ETHER/SJ

Items Specifications Typical User Wiring
See Note 1
Number of Channels DL205

F4-08DA-1 8 (Single end, common x 1) Current
CH1 Output
F4-16DA-1 16 (Single end, common x 1) 0 to 1 kΩ CH 1 4 to 20 mA Current Sink
D /A D4
CH 2 (Same)
Output Range 4 to 20 mA CH2
Current
Output CH 3
D /A
D /A
0 to 1 kΩ
Resolution 12-bit (Same)
CH 4
CH 5
D /A D3
D /A
Current sinking 4 to 20 mA CH 6
D /A
Output Type CH 7
(From external power supply) CH 8
D /A
Programmer
D /A
Maximum Output Voltage 40 V DC (No transient voltage protection) CH10
CH 9
D /A
D /A
0 to 480 Ω (18 V), 220 to 740 Ω (24 V), CH 11
D /A KPP
External Load Resistance CH12
1,550 to 1,760 Ω (48 V) CH 13
D /A
D /A
DirectSOFT
CH14
Maximum Loop Power D /A
48 V DC (A load resistance of proper range is used.) CH 15 (Same)
D /A
Supply Current
CH16 4 to 20 mA Current Sink
D /A
CH16
-70 dB, Maximum ±1 count
Output 0V
Crosstalk 0 to 1 kΩ
0V Terminator I/O
24 V
Linearity Error (End-to-end) Internal DC/DC
Maximum ±1 count 0V
Converter
and Relative Accuracy
+ -- + --
Maximum ±8 count
Full Scale Error 18 to 48 V DC User Power Supply
(20.0 mA, 25˚C, including erroneous offset) Loop Power Supply
(Optional)
+21.6 to 26.4 V DC
100 mA
Offset Error Maximum ±3 count (4.0 mA, 25˚C) 20 mA is Added for

Each 4 to 20 mA Loop Fed
±0.2%: 25˚C by the Module.
Maximum Error
±0.4%: 0 to 60˚C
Maximum 400 μs (Full-scale change),
Conversion Time
2.25 to 4.5 ms (Digital output → Analog output)
F4-08DA-1: Output 16 points (Q) (Binary data bit x
12, channel selection bit x 3, output enable bit x 1)
Number of Occupied
F4-16DA-1:Output 32 points (Q), 2 sets each (Binary
Outputs Features
data bit x 12, channel selection bit x 3, output enable
bit x 1)
Accuracy Against ±57 ppm/˚C full-scale Specifications
Temperature (Including 2 counts for the maximum offset change) ディレーティング
Terminal Type Removable 20P terminal block Dimensions
10
F4-08DA-1: 317 g
Weight 2.0A Output Current CPU

F4-16DA-1: 328 g 8 1.25 A/point Specifications
Note 1: Regarding the shield, the "0 V" of the user power supply should be connected to the module 6 Output Current Special Module
terminal block. 2 A/point
4 (5 A/common) Input/Output
Note 2: The unused current output should be left open (unconnected).
Module
2
Analog Module
0
0 10 20 30 40 50 60 Base Unit

Accessories/
Connector
271
D4 Series
PLC
HMI
Analog Module
SENSOR
■Output Module《8 Channels･16 Channels》
ENCODER F4-08DA-2 F4-16DA-2
COUNTER
INFORMATION
Common
Subject Matter
SJ-ETHER/SJ The photo shows the F4-16DA-1. The photo shows the F4-16DA-1.
(The shape is the same.) (The shape is the same.)

DL205 Number of Channels
See Note 1
Voltage Internal Module Circuitry

F4-08DA-2 8 (Single end, common x 1) CH1 Output
0 to 10 V Voltage Source
1 kΩ to 10 kΩ CH1
D4 F4-16DA-2 16 (Sngle end, common x 1) CH2 (Same)
D /A
Voltage D /A
CH2 CH3
Output Range 0 to 5 V DC, 0 to 10 V DC 1 kΩ to 10 kΩ
Output
CH4
D /A
D /A
D3 Resolution 12-bit (Same) CH5
D /A
CH6
Output Type Voltage source maximum 10 mA CH7
D /A
D /A
CH8
Programmer Maximum 1 kΩ/ minimum 10 kΩ D /A
External Load Resistance CH9
D /A
(Example: 10 V (1 kΩ) = 10 mA load) CH10
D /A
CH11
KPP Crosstalk -70 dB, Maximum ±1 count CH12
D /A
D /A
CH13
Linearity Error (End-to-end) D /A
Maximum ±1 count (DC 10 V, 25˚C) CH14
D /A
DirectSOFT and Relative Accuracy CH15 (Same)
D /A
CH16 0 to 10 V Voltage Source
Maximum ±6 count
D /A
CH16 Voltage
Output 0V
Full Scale Error 1 kΩ to 10 kΩ
Terminator I/O (DC 10 V, 25˚C, including erroneous offset) 0V
Internal
24V
Offset Error Maximum ±3 count (0 V DC, 25˚C) 0V DC/DC
Converter
±0.2%: 25˚C + --
Maximum Error
±0.4%: 0 to 60˚C User Power Supply
21.6 to 26.4 V DC
Maximum 400 μs (Full-scale change), 4.5 to 9 ms 275 mA
Conversion Time
(Digital output → Analog output)
F4-08DA-2: Output 16 points (Q) (Binary data bit x
12, channel selection bit x 3, output enable bit x 1)
Number of Occupied
F4-16DA-2: Output 32 points (Q) (Binary data bit x 12
Outputs
x 2 sets, channel selection bit x 3, output enable bit x
1)
Features Terminal Type Removable 20P terminal block
F4-08DA-2: 370 g
Specifications Weight
F4-16DA-2: 276 g
Dimensions Note 1: Regarding the shield, the "0 V" of the user power supply should be connected to the module 20
terminal block.
2.0A Output Current

CPU 16 0.6 A/point
Specifications
12 Output Current
Special Module
1 A/point
8 (5 A/common)
Input/Output
Module
4
Analog Module
0
Base Unit 0 10 20 30 40 50 60
Accessories/
Connector
272
D4 Series
PLC
HMI
Analog Module
SENSOR
F4-04DAS-1 ENCODER
COUNTER
INFORMATION
Common
Subject Matter
The photo shows the F4-16DA-1. SJ-ETHER/SJ
Output Specifications (Isolation Specifications) Wiring Diagram DL05/06

Number of Channels 4 (Current source, isolation specifications) Internal Module Circuitry DL205
Output Range 4 to 20 mA current User Wiring
N /C
Note 3
Resolution 16-bit 0V1 D4

External
Power Supply
--
+ V1
Output source 4 to 20 mA 18 to 32 V +
Output Type --I1
(From external power supply) CH1 + I1 4 to 20 mA Current Source D /A D3

100 Ω
±750 V continuous, channel-to-channel,
0 to 1375 Ω Note 2 N /C
Isolation Voltage 0 V2
channel → logic
External --
Power Supply
18 to 32 V + + V2 Programmer
--I2
Loop Power Supply 12 to 32 V DC CH2

+ I2 4 to 20 mA Current Source D /A
Output Loop Compliance Vin to 2.5 V 0 to 1375 Ω Note 2 N /C 100 Ω KPP

0 V3
Load impedance 0 to 1375 Ω (32 V) External

Power Supply
18 to 32 V
--
+ + V3
Maximum Load/Power
--I3
DirectSOFT
375 Ω/12 V, 975 Ω/24 V, 1375 Ω/32 V CH3 + I3 4 to 20 mA Current Source D /A
Supply 0 to 1375 Ω
Note 2 N /C
100 Ω
Terminator I/O
0 V4
Analog Data Update Minimum 1 channel, maximum 4 channels per scan External
Power Supply
-- + V4
18 to 32 V +
Number of Occupied Output 32 points (Q) (Binary data bit x 16, -- I 4
4 to 20 mA Current Source D /A
Outputs channel ID bid x 2, output enable bit x 1) CH4
0 to 1375 Ω
+14
100 Ω
Note 2
Linearity Error (End-to-end) Maximum ±10 count (0.015% of full scale)

Conversion Settling Time 3 ms ~ 0.1% of full scale
Gain Error ±32 count (±0.05%)
Offset Error ±13 count (±0.02%)
Accuracy Against
50 ppm/˚C
Temperature
±0.07%:25˚C
Maximum Error
Maximum ±0.18%:0 to 60˚C
Weight 278g Features
"1 count" in the specifications table is equivalent to 1 least significant bit (65536 gradation) of the
analog data value. Specifications
Note 1: The shield should be connected to "0 V." ディレーティング
Note 2: The load must be within the compliance voltage.
10 Dimensions
Note 3: Regarding non-isolated outputs, all 0 V terminals (0 V1 to 0 V4) and all V terminals (+V1 to
+V4) should be respectively connected together. 2.0A Output Current

8 1.25 A/point CPU
Specifications
6 Output Current
2 A/point Special Module
4 (5 A/common)
Input/Output
Module
2
Analog Module
0
0 10 20 30 40 50 60 Base Unit
Accessories/
Connector
273
D4 Series
PLC
HMI
Analog Module
SENSOR
ENCODER F4-04DAS-2
COUNTER
INFORMATION
Common
Subject Matter

DL05/06 Output Specifications (Isolation Specifications) Wiring Diagram

DL205 Number of Channels 4 (Isolation specifications)
User Wiring
Output Range 0 to 5 V DC, 0 to 10 V DC Note 3
N /C
D4
0V1
Resolution 16-bit External
Power Supply
--
+ V1
+
±750 V continuous, channel-to-channel,
24 V
--I1
Isolation Voltage
channel → logic
CH 1
D3
+ I1 D /A
2 kΩ Voltage Source
Note 2 N /C
Load impedance Minimum 2 kΩ External --

0V2
Power Supply + V2
+
Programmer Analog Data Update Minimum 1 channel, maximum 4 channels per scan 24 V
--I2
CH 2 D /A
Number of Occupied Output 32 points (Q) (Data bit x 16, channel ID bid x
+ I2
N /C Voltage Source
2 kΩ Note 2
KPP Outputs 2, output enable bit x 1) External
0V3
--
Maximum ±10 count (0.015% of full scale)
Power Supply
Linearity Error (End-to-end) 24 V
+
--I3
+ V3
DirectSOFT Conversion Settling Time 3 ms ~ 0.1% of full scale CH3 + I3 D /A
±32 count (±0.05%)

Voltage Source
Gain Error 2 kΩ Note 2 N /C
0V4
±13 count (±0.02%)

External
Terminator I/O Offset Error Power Supply
--
+
+ V4
24 V
--I4
±0.07%: 25˚C D /A
Maximum Error CH 4 +14
Maximum ±0.18%: 0 to 60˚C 2 kΩ Note 2

Voltage Source

Weight 299 g
Note 1: The shield should be connected to "0 V."
Note 2: The load must be within the compliance voltage.
Features
Specifications ディレーティング
20
Dimensions
2.0A Output Current

16 0.6 A/point
CPU
Specifications
12 Output Current
Special Module 1 A/point
8 (5 A/common)
Input/Output
Module 4
Analog Module 0
0 10 20 30 40 50 60
Base Unit
Accessories/
Connector
274
D4 Series
PLC
HMI
Analog Module
SENSOR
■Temperature Input Module《8 Channels》
F4-08THM ENCODER
COUNTER
INFORMATION
Common
Subject Matter
SJ-ETHER/SJ
General Specifications Wiring Diagram DL05/06

Items Specifications Internal Module Wiring
Number of Channels 8, differentiation DL205
A/D
Common Mode Signal
±5 V DC See Note
Range Com D4
--1
Common Mode Rejection Minimum 90 dB (DC), CH 1 +1
Ratio minimum 150 dB (50/60 Hz) --2
D3
Input Impedance 1 MΩ Examples of Differential
Thermocouple Wiring
+2
Absolute Maximum Rating Failure protection input to maximum ±50 V DC --3 Programmer
CH 3 +3
Accuracy Against Maximum ±5 ppm/˚C full-scale
Com
Temperature (Including for the maximum offset change) KPP
--4
Analog Data Update 8 channels per maximum scan CH 4 +4
Analog
32 points (Binary data bit x 16, channel ID bid x 2, --5 Switch DirectSOFT
diagnosis bit x 4) CH 5 +5
--6
Terminator I/O
Examples of Grounded +6
Voltage Input Specifications Thermocouple Wiring --7
+7
--8
Voltage Range 0 to 5 V, ±5 V, 0 to 156.25 mV, ±156.25 mV DC CH 8 +8
Resolution 16-bit Com
Standard±13 count, Maximum ±33 count,

User Power Supply 24 V+
Full Scale Error +
the erroneous offset is included. 0V
--
Offset Error Maximum ±1 count (0 V input) 24 V DC±10%, Class 2
Linearity Error (End-to-end) Maximum ±1 count

Maximum Error ±0.02%: 25˚C
Thermocouple Specifications Features

Specifications
ディレーティング Specifications
J type: -190˚C to 760˚C (-310˚F to 1,400˚F)
E type: -210˚C to 1,000˚C (-346˚F to 1,832˚F) 10
K type: -150˚C to 1,372˚C (-238˚F to 2,502˚F) Dimensions
R type: 65˚C to 1,768˚C (149˚F to 3,214˚F) 2.0A Output Current

8 1.25 A/point
Input Range* S type: 65˚C to 1,768˚C (149˚F to 3,214˚F) CPU
T type: -230˚C to 400˚C (-382˚F to 752˚F) 6 Specifications
Output Current
B type: 529˚C to 1,820˚C (-984˚F to 3,308˚F) 2 A/point
N type: -70˚C to 1,300˚C (-94˚F to 2,372˚F) 4 (5 A/common) Special Module
C type: 65˚C to 2,320˚C (149˚F to 4,208˚F)
Display Resolution ±0.1˚C or ±0.1˚F 2 Input/Output
Module
Cold Junction Compensation Automatic
Conversion Time 100 ms/channel 0
Analog Module
Warm-Up Time 30 minutes (Standard) ±1˚C repeatability 0 10 20 30 40 50 60
Linearity Error (End-to-end) Maximum ±0.05˚C, standard ±0.01˚C Ambient Temperature (˚C) Base Unit
Maximum Error ±3˚C (Do not include thermocouple error.)
Weight 229 g Accessories/
Connector
Note 1: Shield should be terminated on the respective signal source sides.
Note 2: The unused channel should be left open (unconnected).
* The type of thermocouple can be set when the internal jumper is set.
275
D4 Series
PLC
HMI
Analog Module
SENSOR
■Temperature Input Module《8 Channels》
ENCODER F4-08RTD
COUNTER
INFORMATION
Common
Subject Matter


DL205 Number of Channels 8 Note 1
Pt100 Type: -200˚C to 850˚C (-328˚F to 1,562˚F) Ch1 + 200 mA
D4 Pt1000 Type: -200˚C to 595˚C (-328˚F to 1,103˚F) Ch1 - Current
Input Range Source
jPt100 Type: -38˚C to 450˚C (-36˚F to 842˚F) Ch2 +
CU-10/25W Type: -200˚C to 260˚C (-328˚F to 500˚F) Ch2 -
D3
Resolution 16-bit C
Input Impedance 27 kΩ DC C Standard
Programmer Adjustment
Display Resolution ±0.1˚C Ch3 -- Circuit
Resistance Thermometer Ch3 +
KPP 200 μA x
Bulb-excited Current Ch4 --
Analog Multiplexer
Note 2 +
Input Type Differentiation Ch4 + A/D
DirectSOFT Ch5 -- -
> 100 dB notch (50/60 Hz),
Notch Filter Ch5 +
-3 dB = 13.1 Hz
Terminator I/O Ch6 --
Maximum Settling Time 100 ms (Full-scale step input) 200 mA
Ch6 + Current
Common Mode Signal Range 0 to 5 V DC Source
C
Absolute Maximum Rating Failure protection input to DC ±50 V C
Converter Type Charge Balancing Ch7 +
Linearity Error (End-to-end) Maximum ±1˚C, standard ±0.01˚C Ch7 -
Full Scale Error ±1˚C Ch8 +
Analog Data Update Minimum 1 channel, maximum 8 channels per scan Ch8 -
Input 32 points (I) (Binary data bit x 15, channel ID bid
x 3, Sign bit x 1, fault bit x 8)
Weight 270 g
Note 1: The three cables that connect the resistance thermometer bulb to the module should be the
same kind and have the same length.
Features Do not use shielded wire or drain wire for the third connection.
Note 2: If the resistance thermometer bulb sensor is a 4-wire system, do not connect the detection ディレーティング
Specifications (+) wire as shown in the figure.
20
2.0A Output Current

Dimensions 16 0.6 A/point
CPU 12
Specifications Output Current
1 A/point
8 (5 A/common)
Special Module
4
Input/Output
Module
0
Analog Module 0 10 20 30 40 50 60
Base Unit
Accessories/
Connector
276
D4 Series
PLC
HMI
Base Unit
SENSOR
■Base
D4-04B-1 D4-06B-1 D4-08B-1 ENCODER
COUNTER
INFORMATION
Common
Subject Matter
The photo shows the D4-06B-1.
SJ-ETHER/SJ
Outline DL05/06
This base unit creates D4 systems.
The bases with expansion functions can be used both as the primary base DL205
and expansion base.
If used as an expansion base with 64 I/O points, the U-1□B should be used. D4
Base Unit Equipped with 4, 6, and 8 Slots D3
For the D4 series product family, base units equipped with 4 slots, 6 slots,
and 8 slots are available. Programmer
KPP
DirectSOFT
Terminator I/O
Features
Specifications
Dimensions
CPU
Model Number List Specifications
Model Number D4-04B-1 D4-06B-1 D4-08B-1
Special Module
Number of Slots 4 6 8
Power Source Available Input/Output
Installation Keyhole aperture (for M5 screws) Module
Weight (g) 660 830 990
Analog Module
Base Unit
Accessories/
Connector
277
D4 Series
PLC
HMI
Base Unit
SENSOR
■Extension Power Source
ENCODER D4-EX D4-EXDC
COUNTER
INFORMATION
Common
Subject Matter
The photo shows the Japanese model.
SJ-ETHER/SJ
DL05/06 Outline Expansion Base Cable

The extension power source is required only when local expansion should An expansion base cable is required
DL205 be realized. The expansion unit is inserted into the CPU slot of the expansion to connect the expansion base to
base unit. Although the expansion power appears similar to a CPU, it has the CPU base. Cables cannot be
D4 only a built-in power source. Since the CPU of the D4 series is inserted into a extended.
dedicated slot of the base unit, it does not occupy the input/output slot. The
D3 same applies to the expansion power source and the remote slave unit (D4-
Model Number D4-EXCBL-2 D4-EXCBL-1
RS). For the connection of each expansion base unit and CPU base unit, a
Cable Length 0.5 m 1.0 m
Programmer base expansion cable (D4-EXCBL-1 or D4-EXCBL-2) is required.
Minimum Bend Radius 40 mm
KPP D4-450/D4-454 Base Unit and 1x Base Unit

In earlier types of D4 series system, special I/O such as a 64-point module
DirectSOFT were limited to the CPU base unit. To remove this restriction, the "-1" base
unit and the D4-450/D4-454 CPU must be used. The model numbers of
Terminator I/O new base units are "D4-04B-1", "D4-06B-1", and "D4-08B-1". (Note: The
dedicated module cannot be mounted on an expansion base unit simply by
adding the "-1" base unit to the existing system. It is necessary to replace
the CPU and all other expansion base units.) Although the "-1" base unit can
be added to the existing system, the restrictions of the normal base unit will
remain.
Specifications
Model Number D4-EX D4-EXDC
100/110/200/220 V AC (Switched by the shorting
Features Rated Output Voltage 24 V DC
bar) 50/60 Hz
Allowable Voltage Variation
Specifications 85 to 132 V AC/170 to 264 V AC 20 to 28 V DC
Range
Maximum Apparent Voltage 80 VA 38 W
Dimensions Inrush Current 20 A 20 A
Output Voltage/Current 24 V DC/0.4 A 5 V DC/4 A 5 V DC/4 A
CPU
Specifications 1 min (1,500 V AC is applied between primary, 1 min (1,500 V AC is applied between primary,
Withstand Voltage
secondary, field grounds, and RUN relay.) secondary, field grounds, and RUN relay.)
Special Module Insulation Resistance > 10 MΩ (500 V DC applied) > 10 MΩ (500 V DC applied)
Weight (g) 660 680
Input/Output
Module Dimensions 150 H x 110 W x 100 D 150 H x 110 W x 100 D
Accessories Shorting bar, 2 units Shorting bar, 2 units
Analog Module
Base Unit
Accessories/
Connector
278
No Terminal Treatment
D4 Series
PLC
HMI
Accessories/Connector
SENSOR
■One-end Loose Wire Cable 64 Points I/O I/OOption
64 Points
Modules U-30JP
U-30JH Slack ENCODER
COUNTER
INFORMATION
Common
Subject Matter
SJ-ETHER/SJ
Wiring Table of U-30JH External View DL05/06

D4-64ND2/D4-64TD1 Loose Wire Connector Cover
CN1 Signal Name CN2 Signal Name Support Line A Support Line B FCN-360C040-J2 DL205
Line A Line B Line A Line B Insulator Mark Insulator Mark
00 04 40 44 Orange 1 Orange 2 D4
01 05 41 45 Gray 1 Gray 2
02 06 42 46 White 1 White 2 D3
03 07 43 47 Yellow 1 Yellow 2
210 Insulator Color Programmer
C1 *1 C5 *5 Pink 1 Pink 2
Cable Length=3m
10 14 50 54 Orange 3 Orange 4
11 15 51 55 Gray 3 Gray 4 KPP
Sheath Outside Diameter: φ9.2
12 16 52 56 White 3 White 4 Mark
10 mm
13 17 53 57 Yellow 3 Yellow 4 Soldered Terminal DirectSOFT
C2 *2 C6 *6 Pink 3 Pink 4
Use Cable: AWG28
20 24 60 64 Orange 5 Orange 6 Allowable Current: 1 A per Wire Terminator I/O
21 25 61 65 Gray 5 Gray 6
22 26 62 66 White 5 White 6 Mark List
23 27 63 67 Yellow 5 Yellow 6 No. Color Mark
C3 *3 C7 *7 Pink 5 Pink 6 1 Red
ー
30 34 70 74 Orange 7 Orange 8 2 Blue
31 35 71 75 Gray 7 Gray 8 3 Red
ーー
32 36 72 76 White 7 White 8 4 Blue
33 37 73 77 Yellow 7 Yellow 8 5 Red
ーーー
C4 *4 C8 *8 Pink 7 Pink 8 6 Blue
7 Red
Note) ーーーー
8 Blue
Symbol D4-64ND2 D4-64TD1 Features
*1 0V V1
*2 0V V2 Specifications
*3 0V V3
*4 0V V4 Dimensions
*5 0V V5
CPU
*6 0V V6 Specifications
*7 0V V7
*8 0V V8 Special Module
Input/Output
Module
Analog Module
Base Unit
Accessories/
Connector
279
D4 Series
PLC
HMI
Accessories/Connector
SENSOR
■Connector Power Cable 64 Points I/O Option
ENCODER U-30JP
COUNTER
INFORMATION
Common
Subject Matter
UL Standards: 2, 1007 AWG20 Cables
3,000 ± 30 mm
SJ-ETHER/SJ
2-pin Connector
DL05/06 Outline External View
This cable is designed to connect the 24 V DC power source that supplies UL Standards: 2, 1007 AWG20 Cables
3,000 ± 30 mm
DL205 power to the 64 point I/O module.
Signal Cable color 2-pin Connector
D4 +24 V Red
No Terminal Treatment
0V Black
D3
Programmer No Terminal Treatment

Precautions in Wiring
The 64-point I/O module side should be wired so that there is a slack.
KPP Note: The terminals of cable are not prepared.
Prepare terminals to enable crimping, etc. as needed by the power source to be connected.
DirectSOFT 64 Points
I/O Modules U-30JP
Terminator I/O Slack
64 Points
I/O Modules U-30JP
Slack
Features
Specifications
Connector Cover
Dimensions FCN-360C040-J2
CPU
Specifications
Connector Cover
Special Module FCN-360C040-J2
Input/Output
210 Insulator Color
Module
Cable Length=3m
Analog Module
Sheath Outside Diameter: φ9.2
Mark
10 mm
Base Unit 210 Insulator Color
Soldered Terminal
Cable Length=3m
Accessories/ Use Cable: AWG28
Connector Allowable Current: 1 A per Wire Sheath Outside Diameter: φ9.2
Mark
10 mm
Soldered Terminal
Use Cable: AWG28

Allowable Current: 1 A per Wire
280
D4 Series
PLC
HMI
SENSOR
ENCODER
COUNTER
INFORMATION
Common
Subject Matter
SJ-ETHER/SJ
DL05/06
DL205
D4
D3
Programmer
KPP
DirectSOFT
Terminator I/O
Features
Specifications
Dimensions
CPU
Specifications
Special Module
Input/Output
Module
Analog Module
Base Unit
Accessories/
Connector
281

D4 Series2018

Uploaded by

Copyright:

Available Formats

D4 Series2018

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

D4 Series2018

Uploaded by

Copyright:

Available Formats

Programmable Logic Controller

Base Unit SJ-ETHER/SJ

D4-08TA 8 18 to 220 V AC 330 Open Special Module

F4-08TRS-2 8 Relay 5 A 380 Open Analog Module

ENCODER Name Outline

Name Outline ENCODER

Ladder Memory Capacity (Word)

SJ-ETHER/SJ The photo shows the D4-454.

DL05/06 General Speciﬁcations Performance Speciﬁcations

Memory Cartridge DL05/06

DL05/06 Remote Master Speciﬁcations Outline

The photo shows the H4-ECOM100. SJ-ETHER/SJ

Speciﬁcations Network Connections Between ERM and Other DL05/06

Outline business network.

DL05/06 Speciﬁcations Easy Connection

Expansion of Communication Ports

DL05/06 General Speciﬁcations Alarm Speciﬁcations

General Speciﬁcations Thermocouple Speciﬁcations DL05/06

Alarm Speciﬁcations Operation Base Unit

DL05/06 General Speciﬁcations Input Resources

Internal Module Circuitry

Input Voltage Range 20 to 52 V DC 24 to 48 V DC D3

Internal Module Circuitry

SJ-ETHER/SJ The photo shows the Japanese model.

DL05/06 Input Speciﬁcations Wiring Diagram

Internal Module Circuitry

Input Speciﬁcations Wiring Diagram DL05/06

Number of Inputs per DL205

ON Voltage Level > 9.5 V Programmer

SJ-ETHER/SJ The photo shows the Japanese model.

DL05/06 Input Speciﬁcations Wiring Diagram 24 V DC Optical Isolation

ItemsCurrent Flow Specifications

KPP Input ImpedanceCurrent Flow 4.8 kΩ

Maximum OFF-state+ Current 1.6 mA

Status Display Logic side Current Flow

Connector Current Flow

32 KOYO ELECTRONICS INDUSTRIES CO., LTD.

The photo shows the Japanese model. SJ-ETHER/SJ

Input Speciﬁcations Wiring Diagram DL05/06

Maximum Input Voltage Wiring30 V DC Input Programmer

Weight 220 g Wiring of EveryCurrent

48 Ambient Temperature (˚C) 24 V DC Base Unit

Ambient Temperature (˚C)

Current Flow 48 Current Flow − −

Internal Module Circuitry

SJ-ETHER/SJ The photo shows the Japanese model.

Input Speciﬁcations Wiring Diagram

Internal Module Circuitry

The photo shows the Japanese model. SJ-ETHER/SJ

Input Speciﬁcations Wiring Diagram DL05/06 100 V AC

Rated Input Voltage 100 V AC

Optical Isolation To LED

Internal Module Circuitry

Common Optical Isolation

SJ-ETHER/SJ The photo shows the Japanese model.

DL05/06 Input Speciﬁcations Wiring Diagram Configuration shown is current sinking.

Weight 250 g Common

12 to 24 V Optical Isolation To LED

Configuration shown is current sinking.