Scribd Logo
Upload

Welcome to Scribd!

  • 39 views

    CT14 Specifications

    Uploaded by

    bunyaminu mohammed
    Ct 14 rig spec

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    CT14 Specifications

    Uploaded by

    bunyaminu mohammed
    39 views2 pages
    Ct 14 rig spec

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Ct 14 rig spec

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    39 views2 pages

    CT14 Specifications

    Uploaded by

    bunyaminu mohammed
    Ct 14 rig spec

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Atlas Copco Exploration Drilling

    Christensen CT14 Core Drill


    CT14 PERFORMANCE SPECIFICATIONS

    Depth capacity coring (wireline or conventional) Chuck assembly


    B wireline 1540 m (5052 ft) Type: hydraulic open, spring closed
    N wireline 1200 m (4042 ft) Maximum inside diameter: 117 mm (4 5/8 in)
    H wireline 800 m (2695 ft) Holding capacity: 1 8143 kg (40 000 lb)
    P wireline 475 m (1558 ft)
    Depth are based on vertical hole Drill base supports
    Frame mounted rig designed to be mounted on a truck
    Main hoist Support: 4 hydraulic jacks
    Single line capacity: Bare drum 80 kN (18 000 lb) Pad size: 210 x 210 mm (8,27 x 8,27 in)
    Line speed: Bare drum 44 m/min (148 ft/min) Travel length: 900 mm (35,43 in)
    Cable size: 35 m (118 ft) x 16 mm (10/16 in)
    Weight
    Wireline Base drill: approx. 9000 kg (19,840 lb)
    Capacity: 1830 m (6000 ft) of 4,76 mm (3/16 in)
    975 m (3200 ft) of 6,35 mm (1/4 in) Dimensions (L – W – H)
    Line pull: bare drum: 11,9 kN (2665 lb) In transport position :
    full drum: 3,0 kN (668 lb) 9900 mm (32,48ft) 2280 mm (7,48ft) 4050 mm (13,29ft)
    Line speed: bare drum 114 m/min (374 ft/min)
    full drum 453 m/min (1486 ft/min) Standard equipment
    -Hydraulic mast dump -Hydraulic mast raise
    Mast and feed system -Mast in two sections -4 hydraulic levelling jacks
    Feed travel: 3,5 m (11,5 ft) -Large crown sheave wheel -Tier II engine
    Feed speeds: fast and slow with variable control -Towing package -Wear lines on lower mast
    Thrust: 59,6 kN (13 390 lb) -Fuel tank 200 l (53 gal) -Safety guards
    Pull: 138 kN (31 020 lb) -Hydraulic oil reservoir fill -Fuel filter & water separator
    Drilling angle: 45 to 90 degrees pump & filtration -Mast lightening kit
    Rod pull length: 6,09 m (20 ft) -Hydraulic P-size rod holder -Hydraulic mud mixer
    -Hydraulic mud pump, Trido 140:
    Power unit max flow: 140 l/min (37 gal/min)
    Manufacture: Cummins max pressure: 4,9 MPa (700 psi)
    Model: QSB5.0-C, 5.9 liter 6 cylinder
    Power: 158 kW (212 hp) Options
    RPM: 1800 -Water flow meter
    Engine type: Diesel turbocharged/after cooled -RPM meter
    Cooling: Water -Hydraulic break out tool

    Hydraulic system All weights and dimensions are approximations and are subject
    Primary pump: 28 MPa – 252 l/min (4061 psi – 66,6 gal/min) to change
    Secondary pump: 17 MPa – 128 l/min (2466 psi – 33,8 gal/min)
    Auxiliary pump: 21,5 MPa – 50 l/min (3118 psi – 13,2 gal/min)
    Hydraulic oil cooling: Air

    Drillhead and spindle speeds


    Power: hydraulic motor – variable speed/reversible
    Final drive: 4 in chain driven in oil bath – 2,5 ratio
    Spindle (inner diameter): 117 mm (4 5/8 in)
    Spindle speeds: Atlas Copco Craelius
    Ratio Speed, rpm Torque, Nm (ftlb) Birstagatan 13
    1st 6,63:1 132-207 5113-3259 (3759-2396) SE-195 82 Märsta
    2nd 3,17:1 275-432 2445-1558 (1798-1146) SWEDEN
    3rd 1,72:1 508-796 1326-846 (975-622)
    4th 1,00:1 873 1369 771-492 (567-362)
    Range selection: manual control from operator’s station
    Hinged head: swing away

    v1.0

    You might also like