Pressure Relief Valve, Plastic: Construction
Pressure Relief Valve, Plastic: Construction
Pressure Relief Valve, Plastic: Construction
Plastic
Construction
The pressure relief valves GEMÜ N085 and N185 protect the plant and the
piping system against gauge pressure and reduces pressure peaks. The
third pipe spigot enables the valve to be installed in the main pipe. If the
pressure increases, the spring is raised and the valve opens. The pressure
is reduced to the preset value and can escape via the third pipe spigot into
an adjacent pipe. If the pressure falls, the spring force presses the
diaphragm in the direction of the seal seat and it is closed. The spring
force can be adjusted as required using a set screw.
Technical specifications*
• Nominal sizes: DN 10 to DN 100
• Connections: Spigots, flanges, union ends with insert
• Body materials: PVC-U, PP-B, PVDF
• Seal materials: EPDM, PTFE
• Media temperature: -20 °C to +100 °C
• Setting range: 0.5 to 10 bar
Advantages
• Valve adjustments can also be made under working pressure.
• The optimization of piston, springs and control face ensures good
control characteristics.
• The actuator is hermetically separated from the medium.
Sectional view
N085, N185
Technical data
Working medium
Working medium temperature
Corrosive, inert, liquid media which have no negative impact
on the physical and chemical properties of the body and Valve body PVC-U 0 to 60 °C
seal material. Approved for fluids of Group 1 in accordance Valve body PP-B 0 to 80 °C
with directive 2014/68/EC Article 13 ature is a maximum of
Valve body PVDF -20 to 100 °C
0.5 bar above the normal atmospheric pressure (1013 mbar).
The permissible operating pressure depends on the working medium
temperature.
Ambient conditions
Ambient temperature 0 to 60 °C
Technical data
Type Nominal size PN Setting range [bar]
GEMÜ N185 DN 10 - 50 10 0.5 - 10
DN 65 - 80 6 1-6
GEMÜ N085
DN 100 4 1-4
N085, N185
2
Diagrams - N185
DN 10 - 15 DN 20
DN 25 DN 32
Set pressure [bar]
DN 40 DN 50
Set pressure [bar]
Set pressure [bar]
The characteristics in the diagrams show the pressure drop of the set pressure from 0 to max. permissible flow.
The upper line shows the progression of the opening pressure, the lower line shows the progression of the closing pressure.
All characteristics relate to water at 20 °C.
N085, N185
3
Diagrams - N085
DN 65 DN 80
Set pressure [bar]
The characteristics in the diagrams show the pressure drop of the set pressure from 0 to max. permissible flow.
The upper line shows the progression of the opening pressure, the lower line shows the progression of the closing pressure.
All characteristics relate to water at 20 °C.
Order data
N085, N185
4
Dimensions [mm]
N085, N185
L L1 L2
Connection Connection Connection Connection
Typ DN d code 0 code 20 codee 4 code 7, 78 øD h h1 H
Material Material Material Material Material Material Material Material
code 1, 20, B5 code 20, B5 code 1 code 20 code B5 code 1 code 20 code B5
10 16 134 158 140 168 - 154 180 180 83 20.0 20.0 137
15 20 134 158 140 168 168 154 182 182 83 20.0 20.0 137
20 25 134 158 140 168 168 154 182 182 83 20.0 20.0 137
GEMÜ
25 32 174 198 180 208 208 194 222 222 112 27.0 27.0 199
N185
32 40 174 202 180 212 212 198 230 230 112 27.0 27.0 199
40 50 224 256 230 266 266 252 288 288 165 43.0 43.0 290
50 63 244 256 250 266 266 280 296 296 165 43.0 43.0 290
65 75 284 284 290 - 294 320 - 320 180 47.5 117.0 275
GEMÜ
80 90 360 360 370 - 374 396 - 396 250 55.0 155.0 410
N085
100 110 380 380 390 - 394 402 - 424 250 70.0 180.0 485
Code
Code 0, 20
0, 20 Code
Code 44
Code
Code7,
7, 78
78
H
L1
d
øD
L
L2
d
h1
d
øD
L
N085, N185
5
Overview of valve bodies for N185
Connection 0 4 7 20 78
code
Material 1, 20, B5 1, 20 B5 1, 20, B5 20, B5 20, B5
code
VALVES, MEASUREMENT
AND CONTROL SYSTEMS
GEMÜ Gebr. Müller · Apparatebau GmbH & Co. KG · Fritz-Müller-Str. 6-8 · D-74653 Ingelfingen-Criesbach · Tel. +49(0)7940/123-0 · Telefax +49(0)7940/123-224
[email protected] · www.gemu-group.com