BSC6900 GU

V900R014C00
Parameter List
Issue 05

Date 2013/04/15

HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei
Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or
part of the products, services and features described in this document may not be within the purchase scope or the usage
scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are
provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the preparation of this
document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not
constitute the warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Huawei Industrial Base
Bantian, Longgang
Address:
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: [email protected]
Purpose
This document describes the MO parameters of BSC6900. For the details about the
parameters related to northbound interface interconnection, see the RAN14.0 Parameter
List.

Intended Audience
This document is intended for:
● Network planners
● System engineers
● Field engineers
● Shift operators
●Site maintainers
●Network operators

Structure
The following table describes the attributes of each parameter.

Parameter Attribute
MO
Parameter ID
Parameter Name
NE
MML Command

Meaning

IsKey
Mandatory
Feature ID
Feature Name
Value Type
GUI Value Range

Huawei Proprietary and Confidential

Issue 01 (06/11/2024) 3
Copyright © Huawei Technologies Co., Ltd
Enumeration Number/Bit

Unit
Actual Value Range

Default Value

Recommended Value

Initial Value Source

Impact

Parameter Relationship

Access
Service Interrupted After Modification
Interruption Scope
Interruption Duration (min)
Caution
Validation of Modification
Impact on Radio Network
Performance
Introduced in Version…
Attribute

Huawei Proprietary and Confidential

Issue 01 (06/11/2024) 4
Copyright © Huawei Technologies Co., Ltd
s document describes the MO parameters of BSC6900. For the details about the
ameters related to northbound interface interconnection, see the RAN14.0 Parameter
.

s document is intended for:

Network planners
System engineers
Field engineers
Shift operators
Site maintainers
Network operators

bes the attributes of each parameter.

Description
Managed object of NE.
A simple character string used for identifying a parameter.
Name of a parameter.
NEs on which the parameter is set.
Man Machine Language (MML) command related to the parameter.

Function of a parameter, protocol that defines the parameter, whether the parameter is out of use
in later versions, and whether the parameter is an advanced parameter.
If the parameter will be out of use, a related description beginning with "Disuse statement" will be
provided in the parameter meaning.
Advanced parameters are not configured through northbound interfaces. To modify these
parameters, contact Huawei Customer Service Center for technical support.
If parameters meet one of the following conditions, they are treated as advanced parameters:
1. Parameters are temporarily introduced in a new feature or a customized feature to achieve
optimal network performance.
These parameters will have fixed values and will be deleted after the beta test or test at the
customized site.
2. Modifications to these parameters have a great impact on network KPIs or performance.
Normally, modifications of these parameters are not required for features. To achieve optimal
network performance, multiple parameters must be modified because modification of a single
parameter has little effect on the network and even may cause accidents, for example, service
interruption.

Whether the parameter is used to identify an MO instance.

Whether the parameter is mandatory for creating an MO instance.
ID of the feature that uses the parameter.
Name of the feature that uses the parameter.
Type of a parameter value.
Range of the parameter values displayed on the GUI.

Huawei Proprietary and Confidential

Issue 01 (06/11/2024) 5
Copyright © Huawei Technologies Co., Ltd
Enumeration number corresponding to the GUI value of a parameter of the enumeration type, or
bit position corresponding to the GUI value of a parameter of the bit field type.
Unit of a parameter value displayed on the GUI.
Range of the actual values corresponding to the parameter values displayed on the GUI.
Initial value assigned by the system for a parameter. For a mandatory parameter, no default value
is available. For a bit field parameter, if the value of a sub-parameter is ON, the bit
representing the sub-parameter is set to 1; if the value of a sub-parameter is OFF,
the bit representing the sub-parameter is set to 0. None indicates that no default
value is available.
Generally, it is displayed on the configuration window of an ADD command but not
displayed on the configuration window of a MOD/RMV/DSP/LST command.
Parameter values recommended for different scenarios.

Source for the initial configuration of a parameter. The initial value source can be:
Radio planning (Internal planning): The parameter value comes from the radio network plan,
facilitating resource management on the NE.
Radio planning (Negotiation with the peer): The parameter value comes from the radio network
plan. The NE negotiates this value with the peer device to ensure successful interworking.
Transport planning (Internal planning): The parameter value comes from the transport network
plan, facilitating resource management on the NE.
Transport planning (Negotiation with the peer): The parameter value comes from the transport
network plan. The NE negotiates this value with the peer device to ensure successful
interworking.
Equipment planning: The parameter value comes from the equipment plan.
Engineering design: The parameter value comes from the algorithm or function design.
Default/recommended value: The parameter value uses the default or recommended value,
where the recommended value is preferential. The default/recommended value can be used in
most scenarios and adjusted for a specific scenario.
N/A: The parameter value is not required.

Parameter impact scope.

Relationship with other parameters. For example, to use this parameter, you need to set related
Whether
switches aand
parameter has one of the following properties:
parameters.
Read/Write: The parameter can be added, deleted, or modified.
Restricted: The parameter can be added or deleted only.
Whether modifying
Read-only: the parameter
The parameter cannot value
be set.interrupts the ongoing services.
Possible interruption scope.
Possible interruption duration (unit: minute).
Cautions to be taken during the modification.
How this parameter takes effect and whether the equipment needs to be restarted after the
modification.
Impact of the parameter on radio network performance.
Product version in which the parameter is introduced.
Whether the parameter is a radio parameter, a transport parameter, or an equipment parameter.

Huawei Proprietary and Confidential

Issue 01 (06/11/2024) 6
Copyright © Huawei Technologies Co., Ltd
 763391942.xls 文档密级：

Parameter Mandator
MO Parameter ID NE MML Command Meaning IsKey
Name achieve y
the
balance
between
the signal
quality in
the SHO
area and
the
system
performan
ce. If
more cells
are in the
active set,
a user
ADD can
UCELLINTRAF obtain a
UCELLIN
MaxCellInActi Max Number of REQHO greater
TRAFRE BSC6900 NO NO
veSet Cell in Active Set MOD macro
QHO
UCELLINTRAF diversity
REQHO gain; the
intra-
frequency
interferen
ce is
smaller.
In this
case,
however,
the user
occupies
resources
of several
cells. This
increases
the
amount of

06/11/2024 华为机密，未经许可不得扩散 第7页，共18页

 763391942.xls 文档密级：

achieve
the
balance
between
the signal
quality in
the SHO
area and
the
system
performan
ce. If
more cells
are in the
active set,
a user
can
obtain a
SET
UINTRAF MaxCellInActi Max Number of greater
BSC6900 UINTRAFREQH NO NO
REQHO veSet Cell in Active Set macro
O
diversity
gain; the
intra-
frequency
interferen
ce is
smaller.
In this
case,
however,
the user
occupies
resources
of several
cells. This
increases
the
amount of

06/11/2024 华为机密，未经许可不得扩散 第8页，共18页

 763391942.xls 文档密级：

Feature Feature GUI Value Enumeration

Value Type Unit
ID Name Range Number/Bit

Intra RNC
WRFD- Soft
020202 Handover
Interval Type 1~6 N/A None
WRFD- Inter RNC
020203 Soft
Handover

06/11/2024 华为机密，未经许可不得扩散 第9页，共18页

 763391942.xls 文档密级：

Intra RNC
WRFD- Soft
020202 Handover
Interval Type 1~6 N/A None
WRFD- Inter RNC
020203 Soft
Handover

06/11/2024 华为机密，未经许可不得扩散 第10页，共18页

 763391942.xls 文档密级：

Actual Value
Default Value Recommended Value Initial Value Source Impact
Range

Radio Planning
1~6 3 3 Cell
(Internal planning)

06/11/2024 华为机密，未经许可不得扩散 第11页，共18页

 763391942.xls 文档密级：

Radio Planning
1~6 3 3 Cell
(Internal planning)

06/11/2024 华为机密，未经许可不得扩散 第12页，共18页

 763391942.xls 文档密级：

Service Interrupted After

Parameter Relationship Access Interruption Scope
Modification

Read & No (And no impact on the UE in idle

None N/A
Write mode)

06/11/2024 华为机密，未经许可不得扩散 第13页，共18页

 763391942.xls 文档密级：

Read & No (And no impact on the UE in idle

None N/A
Write mode)

06/11/2024 华为机密，未经许可不得扩散 第14页，共18页

 763391942.xls 文档密级：

Interruption Duration Validation of Impact on Radio Network

Caution
(min) Modification Performance

To reduce intra-frequency interference,

it is recommended that the number of
cells in the active sets should be
The parameter increased in the hot-spot and micro
N/A None modification has no cells, where the signals are
impact on the equipment. complicated. For the cell that provides
high speed services, the decrease in
cells in the active set can reduce the
consumption of system resources.

06/11/2024 华为机密，未经许可不得扩散 第15页，共18页

 763391942.xls 文档密级：

To reduce intra-frequency interference,

it is recommended that the number of
cells in the active sets should be
The parameter increased in the hot-spot and micro
N/A None modification has no cells, where the signals are
impact on the equipment. complicated. For the cell that provides
high speed services, the decrease in
cells in the active set can reduce the
consumption of system resources.

06/11/2024 华为机密，未经许可不得扩散 第16页，共18页

 763391942.xls 文档密级：

Introduced in Version… Attribute

Versions earlier than

Radio
BSC6900 V900R011

06/11/2024 华为机密，未经许可不得扩散 第17页，共18页

 763391942.xls 文档密级：

Versions earlier than

Radio
BSC6900 V900R011

06/11/2024 华为机密，未经许可不得扩散 第18页，共18页