Ditec QIK Data Sheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Data sheet

STURDY

SAFE

SETTING

VERSATILE

Automatic
barriers
Ditec QIK
for passages
up to 7.6 m
EN
PL = min 4500 - max 7600 405 525
100
PL = min 1300 - max 5800 300 320

125

140

1180
40

1050
840

815

560
210
80 80

TECHNICAL SPECIFICATIONS 355

DESCRIPTION QIK 7EH QIK 80EH


Barriers up to 5.8 m up to 7.6 m
Stroke control encoder encoder + limit switch
Arm length up to 6m 7.95 m
Arm elliptic round
Duty class very heavy heavy duty
Intermittent operation S2 = 60 mins - S3 = 60% S2 = 50 mins - S3 = 50%
Power supply 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz
Power input 1A 1.2 A
Torque 70 Nm 200 Nm
Opening and closing time 2 ÷ 6 s/90° 6 ÷ 12 s/90°
Release system for manual opening key-operated key-operated
Operating temperature -20°C ÷ +55°C (-35°C ÷ +55°C with NIO activated, -10°C ÷ +50°C with batteries)
Protection rating IP 24D IP 24D

MAIN FUNCTIONS OF THE SYSTEM


DESCRIPTION QIK 7EH QIK 80EH
Control panel ref. EL31R with built-in radio rif. EL34 con decodificatore radio incorporato *
Mains power supply 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz
Batteries (optional) (optional)
Accessories power supply 24 Vdc / 0.3 A 24 Vdc / 0.5 A
Electro-mechanical lock 24 Vdc / 1 A 24 Vdc / 1 A
Flashing light 24 Vdc 24 Vdc
Gate-open warning light analogue analogue
Courtesy light
Designed to accommodate limit switch
Encoder to control speed and deceleration
Force setting automatic automatic
ODS - Obstacle Detection System
Speed setting
Braking/slowing down
Time setting
Open control (with dip-switch)
Partial opening control
Close control
Timer-controlled automatic closing
Inching control (with dip-switch)
Hold-to-run control
Emergency stop
Emergency reverse
Safety-test function
Soft Start
Immediate closing after transit
NIO - Antifreeze system
Protection rating IP 55 IP 55

*Note: add the GOLR receiver card for use with Ditec ZEN remote control

Ditec S.p.A. Tel +39 02 963911 [email protected] Data sheet - 02/2022


Ditec QIK
Largo U. Boccioni, 1 Fax +39 02 9650314 www.ditecautomations.com
21040 Origgio (VA) · Italy

Cert. n. 0957/6

You might also like