Teccor® brand Thyristors

Silicon Controlled Rectifiers

Sx02xS EV Series 1.5 Amp Sensitive SCR

Description

New 1.5Amp sensitive gate SCR series offers high static

dv/dt with low turn off time (tq) through small die planar
construction design. All SCR’s junctions are glass-
passivated to ensure long term reliability and parametric
stability.

Features
t

3P)4
DPNQMJBOU t

)JHI
EWEU
OPJTF
JNNVOJUZ
t

5ISV
IPMF
BOE
TVSGBDF
t

*NQSPWFE
UVSOPGG

mount packages time (tq) < 35 μsec.
t

4VSHF
t

4FOTJUJWF
HBUF
GPS
EJSFDU

capability > 15Amps microprocessor interface
Main Features
t

#MPDLJOH
WPMUBHF

Symbol Value Unit (VDRM / VRRM )
capability — up to 600V
IT(RMS) 1.5 A
VDRM / VRRM 400 to 600 V
Schematic Symbol
IGT 200 μA
A

Applications

The Sx02xS EV series is specifically designed for Gas

G
Ignition applications that require high pulse surge current
capability. K

Absolute Maximum Ratings

Symbol Parameter Value Unit

RMS on-state current TO-92 TC = 65°C

IT(RMS) 1.5 A
(full sine wave) SOT-223 TL = 95°C
TO-92 TC = 65°C
IT(AV) Average on-state current 0.95 A
SOT-223 TC = 95°C
F = 50 Hz 12.5
Non repetitive surge peak on-state current TO-92
ITSM A
(Single cycle, TJ initial = 25°C) SOT-223
F = 60 Hz 15.0

tp = 10 ms F = 50 Hz 0.78
I2t I2t Value for fusing A2s
tp = 8.3 ms F = 60 Hz 0.93
TO-92
di/dt Critical rate of rise of on-state current IG = 10mA TJ = 125°C 50 A/μs
SOT-223
IGM Peak gate current tp = 10 μs TJ = 125°C 1.0 A

PG(AV) Average gate power dissipation TJ = 125°C 0.1 W

Tstg Storage junction temperature range -40 to 150

°C
TJ Operating junction temperature range -40 to 125

Sx02xS EV Series 1.5 Amp Sensitive SCRs 190 www.littelfuse.com

Power Thyristor Databook ©2008 Littelfuse
 Teccor® brand Thyristors
Silicon Controlled Rectifiers

Electrical Characteristics (TJ = 25°C, unless otherwise specified)

Sx02xS
Symbol Description Test Conditions Unit
Min Max

IGT DC Gate Trigger Current 15 200 μA

VD = 12V
RL = 60 Ω
VGT DC Gate Trigger Voltage — 0.8 V

VGRM Peak Reverse Gate Voltage IRG = 10μA 5 — V

IH Holding Current RGK = 1 kΩ — 5 mA

TJ = 125°C
Critical Rate-of-Rise of VD = VDRM / VRRM
(dv/dt)s 25 — V/μs
Off-State Voltage Exponential Waveform
RGK = 1 kΩ
TJ = 125°C @ 600 V
tq Turn-Off Time — 35 μs
RGK = 1 kΩ
IG = 10mA
tgt Turn-On Time PW = 15μsec — 3 μs
IT = 3.0A (pk)

Static Characteristics (TJ = 25°C, unless otherwise specified)

Value
Symbol Description Test Conditions Unit
Min Max

VTM Peak On-State Voltage ITM = 3.0A (pk) — 1.70 V

TJ = 25°C @ VD= VDRM

— 5 μA
RGK = 1 kΩ
IDRM Off-State Current, Peak Repetitive
TJ = 125°C @ VD= VDRM
— 500 μA
RGK = 1 kΩ

Thermal Resistances

Symbol Description Test Conditions Value Unit

TO-92 50
Rth(j-c) Junction to case (AC) IT = 1.5A (RMS)1 °C/W
SOT-223 25
TO-92 160
Rth(j-a) Junction to ambient IT = 1.5A (RMS)1 °C/W
SOT-223 60
1
60Hz AC resistive load condition, 100% conduction.

www.littelfuse.com 191 Sx02xS EV Series 1.5 Amp Sensitive SCRs

©2008 Littelfuse Power Thyristor Databook
 Teccor® brand Thyristors
Silicon Controlled Rectifiers

Figure 1: Normalized DC Gate Trigger Current Figure 2: Normalized DC Holding Current

vs. Junction Temperature vs. Junction Temperature

2.5
2.0

2.0
Normalized Gate: Trigger Current

 



1.5




 






IGT @ Tj / IGT@ 25ºC

1.5

1.0

1.0

0.5

0.5

0.0

0.0 -40 -25 -10 +5 +20 +35 +50 +65 +80 +95 +110 +125

-40 -25 -10 +5 +20 +35 +50 +65 +80 +95 +110 +125 
 
 


Junction Temperature (TJ) °C

Figure 3: Normalized DC Gate Trigger Voltage Figure 4: Power Dissipation (Typical)

vs. Junction Temperature vs. RMS On-State Current

1.5
1.5
Average Power Dissipation, PD (Watts)

CURRENT WAVEFORM: Sinusoidal

LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180o
Normalized Gate: Trigger Voltage

1.0
(VGT @ Tj / VGT @ 25ºC)

1.0

0.5

0.5

-40 -25 -10 +5 +20 +35 +50 +65 +80 +95 +110 +125 0.0
Junction Temperature (TJ) °C 0.0 0.5 1.0 1.5
RMS On-state Current [I T (RMS) ] (Amps)

Figure 5: Maximum Allowable Case Temperature

vs. On-State Current

130
Max Allowable Case Temperature, T C (Celsius)

120
SOT-223
110

100
TO-92
90

80

70 CURRENT WAVEFORM: Sinusoidal

LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180o
CASE TEMPERATURE: Measured as
60 shown on dimensional drawings

50
0.0 0.5 1.0 1.5
RMS On-state Current [IT (RMS)] (Amps)

Sx02xS EV Series 1.5 Amp Sensitive SCRs 192 www.littelfuse.com

Power Thyristor Databook ©2008 Littelfuse
 Teccor® brand Thyristors
Silicon Controlled Rectifiers

Figure 6: Surge Peak On-State Current vs. Number of Cycles

Peak Surge (Non-repetitive) On-State Current

Supply Frequency: 60Hz Sinusoidal

20 Load: Resistive
RMS On-State Current [IT(RMS)]: Max Rated Value at
15
Specific Case Temperature
12
10
9 Notes:
8 1. Gate control may be lost during and immediately
7
(ITSM ) – Amps.

6
following surge current interval.
2. Overload may not be repeated until junction
5
temperature has returned to steady-state rated value.
1.5 A
4 Dev
ices
3

1
1 2 3 4 5 6 7 8 9 10 20 30 40 60 80 100 200 300 400 600 1000

Surge Current Duration – Full Cycle

Soldering Parameters

Reflow Condition Pb – Free assembly

- Temperature Min (Ts(min)) 150°C

Pre Heat - Temperature Max (Ts(max)) 200°C
- Time (min to max) (ts) 60 – 180 secs
Average ramp up rate (Liquidus Temp)
5°C/second max
(TL) to peak
TS(max) to TL - Ramp-up Rate 5°C/second max
- Temperature (TL) (Liquidus) 217°C
Reflow
- Time (min to max) (ts) 60 – 150 seconds
Peak Temperature (TP) 260+0/-5 °C
Time within 5°C of actual peak
20 – 40 seconds
Temperature (tp)
Ramp-down Rate 5°C/second max
Time 25°C to peak Temperature (TP) 8 minutes Max.
Do not exceed 280°C

www.littelfuse.com 193 Sx02xS EV Series 1.5 Amp Sensitive SCRs

©2008 Littelfuse Power Thyristor Databook
 Teccor® brand Thyristors
Silicon Controlled Rectifiers

Physical Specifications Environmental Specifications

Test Specifications and Conditions

Terminal Finish 100% Matte Tin-plated.
MIL-STD-750, M-1040, Cond A Applied
AC Blocking
Peak AC voltage @ 125°C for 1008 hours
UL recognized epoxy meeting flammability
Body MIL-STD-750, M-1051,
classification 94V-0.
Temperature Cycling 100 cycles; -40°C to +150°C; 15-min
dwell-time
Lead Material Copper Alloy
EIA / JEDEC, JESD22-A101
Temperature/
1008 hours; 320V - DC: 85°C; 85%
Humidity
rel humidity
Design Considerations MIL-STD-750, M-1031,
High Temp Storage
1008 hours; 150°C
Careful selection of the correct device for the application’s
Low-Temp Storage 1008 hours; -40°C
operating parameters and environment will go a long way
toward extending the operating life of the thyristor. Good MIL-STD-750, M-1056
design practice should limit the maximum continuous 10 cycles; 0°C to 100°C; 5-min dwell-
Thermal Shock
current through the main terminals to 75% of the device time at each temperature; 10 sec (max)
rating. Other ways to ensure long life for a power discrete transfer time between temperature
semiconductor are proper heat sinking and selection of EIA / JEDEC, JESD22-A102
voltage ratings for worst case conditions. Overheating, Autoclave 168 hours (121°C at 2 ATMs) and
overvoltage (including dv/dt), and surge currents are 100% R/H
the main killers of semiconductors. Correct mounting, Resistance to
MIL-STD-750 Method 2031
soldering, and forming of the leads also help protect Solder Heat
against component damage.
Solderability ANSI/J-STD-002, category 3, Test A
Lead Bend MIL-STD-750, M-2036 Cond E

Dimensions — TO-92

Inches Millimeters
Dimensions
Min Typ Max Min Typ Max

A 0.175 — 0.205 4.450 — 5.200

# 0.170 — 0.210 4.320 — 5.330

C 0.500 — — 12.700 — —

D 0.135 0.165 — 3.430 4.190 —

E 0.125 — 0.165 3.180 — 4.190

F 0.080 0.095 0.105 2.040 2.400 2.660

G 0.016 — 0.021 0.407 — 0.533

H 0.045 0.050 0.055 1.150 1.270 1.390

I 0.095 0.100 0.105 2.420 2.540 2.660

J 0.015 — 0.020 0.380 — 0.500

Sx02xS EV Series 1.5 Amp Sensitive SCRs 194 www.littelfuse.com

Power Thyristor Databook ©2008 Littelfuse
 Teccor® brand Thyristors
Silicon Controlled Rectifiers

Dimensions – SOT-223

Inches Millimeters
Pad Layout for SOT-223 Dimensions
Min Typ Max Min Typ Max
3.3
(0.130”)
A 0.248 0.256 0.264 6.30 6.50 6.70

# 0.130 0.138 0.146 3.30 3.50 3.70

1.5
(0.059”)
C — — 0.071 — — 1.80
1.2
(0.047”) 2.3
(0.091”)
6.4
(0.252”)
D 0.001 — 0.004 0.02 — 0.10
(3x)
E 0.114 0.118 0.124 2.90 3.00 3.15
1.5
(0.059”)
F 0.024 0.027 0.034 0.60 0.70 0.85
4.6
(0.181”)
G — 0.090 — — 2.30 —
Dimensions in Millimeters (Inches) H — 0.181 — — 4.60 —

I 0.264 0.276 0.287 6.70 7.00 7.30

J 0.009 0.010 0.014 0.24 0.26 0.35

K 10° MAX

Product Selector

Voltage
Part Number Gate Sensitivity Package
400V 600V
S402ES X — 200μA TO-92

S602ES — X 200μA TO-92

S402TS X — 200μA SOT-223

S602TS — X 200μA SOT-223

Packing Options

Part Number Marking Weight Packing Mode Base Quantity

Sx02ES Sx02ES 0.170 g #VML 2500

Sx02ESAP Sx02ES 0.170 g Ammo Pack 2000

Sx02ESRP Sx02ES 0.170 g Tape & Reel 2000

Sx02TSRP Sx02TS 0.120 g Tape & Reel 1000

Note: x = voltage

www.littelfuse.com 195 Sx02xS EV Series 1.5 Amp Sensitive SCRs

©2008 Littelfuse Power Thyristor Databook
 Teccor® brand Thyristors
Silicon Controlled Rectifiers

TO-92 (3-lead) Reel Pack (RP) Radial Leaded

Meets all EIA-468-B 1994 Standards

0.236 0.02 (0.5)

0.098 (2.5) MAX
(6.0) 1.26
1.6
(41.0) (32.0)

0.708
(18.0) 0.354
(9.0)
0.5 MT1 / Cathode MT2 / Anode
(12.7) 0.1 (2.54)
0.2 (5.08) Gate
14.17(360.0) 0.157 DIA
(4.0)

Flat up

1.97
(50.0)

Dimensions
are in inches
Direction of Feed (and millimeters).

TO-92 (3-lead) Ammo Pack (AP) Radial Leaded

Meets all EIA-468-B 1994 Standards

0.236 0.02 (0.5)

(6.0) 0.098 (2.5) MAX
1.27
1.62 (32.2)
(41.2)
0.708
(18.0) 0.354
(9.0)

0.5 0.1 (2.54) MT2 / Anode MT1 / Cathode 0.157

(12.7) (4.0) DIA
0.2 (5.08) Gate
Flat down
n of Feed
Directio

25 Devices per fold

1.85
(47.0)

12.2
(310.0)

Dimensions
are in inches
1.85 (and millimeters).
(47.0)

13.3
(338.0)

Sx02xS EV Series 1.5 Amp Sensitive SCRs 196 www.littelfuse.com

Power Thyristor Databook ©2008 Littelfuse
 Teccor® brand Thyristors
Silicon Controlled Rectifiers

Tape & Reel Specifications for SOT-223

1.5 mm 4 mm 8 mm 2 mm

A / MT2

1.75 mm

5.5 mm
12 mm

K / MT1 A / MT2 GATE

180 mm

13 mm Abor
Hole Diameter

13.4 mm

Part Numbering System Part Marking System

S x 02 x xx xx
DC
SCR SERIES PACKING TYPE Date Code
(2 Digits Min.)
Blank: Bulk Number = Year
RP: Reel Pack (TO-92) Letter = Month

VOLTAGE : Embossed Carrier Pack

4: 400V (SOT-223)
6: 600V AP: Ammo Pack (TO-92)
CURRENT SENSITIVITY
02: 1.5A S: 200μA Sensitive SCR

PACKAGE TYPE
E: TO-92
T: SOT-223

www.littelfuse.com 197 Sx02xS EV Series 1.5 Amp Sensitive SCRs

©2008 Littelfuse Power Thyristor Databook