Control home automation conveniently via remote control –

and with minimal installation effort!

KNX RF can be used as an exclusively wireless solution or

connected to a wired KNX TP system.

KNX RF
All Advantages of KNX – Wireless
A COMFORTABLE SMART HOME
WITH KNX RF
You would like to operate roller shutters, blinds, awnings and windows via radio remote control?
– KNX RF is perfect for „Smart Home“ beginners with a high standard!
Easy to retrofit and expandable at any time!

SHADING AND VENTILATION

with the Actuators KNX RF-MSG RF
The plug-in modules integrate drives of shadings and windows into the KNX system. KNX RF Radio
Simply plug in between motor and power supply (STAK3 / STAS3), order matching
connection lines (STAK3 / STAS3) at the same time.
Fast commissioning without interfering with the electrical installation: Simply use the suitable
mains supply with earthing contact plug! The fixed connection to the home mains network can be
done later by a qualified electrician.

KNX RF-MSG-ST, KNX RF-MSG(2)-DST

Actuators for 1 or 2 motors
The actuators determine the drives‘ running time based on the current, thus the shadings are
positioned properly.
Bus functions: position feedback and storage, scenes.
Retransmitter function: The forwarding of all received KNX RF telegrams increases the range of the
radio system.
Available for 1 motor / for 1 motor with 230 V loop-through function / for 2 motors.

Also available as plug-in module: Group Control Relay GS2-DST for parallel operation of two drives
without integrated isolating relay.

FLEXIBLE USE DUE TO MULTIFUNCTIONALITY

KNX RF S1R-B2 compact KNX RF S1R-B2 compact
Actuator for 1 motor or 2 consumer loads
The multifunctional actuator controls either a drive of shading or window (up & down) or switches two
electrical loads, for example lights or fans.
Compact design: The device can be placed in any junction box or cavity.
Bus functions: Position feedback and storage, scenes, short-term and movement restrictions.
Via 2 digital inputs you can, for example, connect conventional push-buttons or window contacts to
the KNX system.

SWITCHING 16 A
with KNX RF R1-B2 compact 16 A
The compact actuator switches a consumer up to 16 A, e.g. sockets or large-scale electrical devices.
This makes it ideal for safe complete shutdown and standby avoidance.
Via 2 digital inputs you can, for example, connect conventional push-buttons or other auxiliary
contacts to the KNX system.
KNX RF R1-B2 compact 16 A
All KNX RF devices from Elsner Elektronik comply with the S-Mode standard. This means that they are Actuator for 1 consumer load
configured with the device-specific application in the ETS.
COMBINING RADIO AND WIRE:
THE BEST OF BOTH WORLDS
You would like to supplement a wired KNX TP project flexibly and increase the ease of use?
– KNX RF is perfect for easy, fast extension! This only requires a media coupler.
And the remote control will be the icing on the cake of your project!

KNX TP wired system with further

TP actuators, sensors & system devices

CONNECTING KNX RF AND KNX TP

with the Media Coupler KNX RF LC-TP
KNX TP

Complete wired KNX TP systems with KNX RF, e.g. to integrate a remote control or additional wireless
actuators.
Bidirectional data exchange.
Display shows addressing, KNX traffic (bus load for RF and TP), incoming and outgoing telegrams (for
RF and TP, with source and target address) and signal strength.

KNX RF LC-TP
Media Coupler

CONTROLLING TECHNOLOGY BY FINGERTIP

with the Remote Control Remo KNX RF
Handheld transmitter for up to 32 KNX devices / functions, e.g. positioning actuators, switching or
dimming light, recall scenes …
Functions: Switching, dimming, light colour RGBW, light colour temperature, positioning of drives
(awning, blind, roller shutter, window), temperature change (for heating/cooling), scenes, operation of
media technology, value display.
Colored touch display with shutdown function: A built-in motion detection automatically activates the
display when the remote control is picked up.
The names of the radio channels and their display order can be changed directly on the touch display.
The basic setup is made using the ETS.
The integrated lithium battery is loaded by a standard power supply with micro-USB cable.

Remo KNX RF Remote Control

SIMPLE SETUP AT THE PC

with the KNX RF USB Stick
The USB stick is the interface for setting up a KNX system via KNX RF.
The stick works with any windows-based PC, drivers are installed automatically.
KNX RF devices such as the Remo KNX RF remote control and the KNX RF-MSG-(D) ST actuators are
addressed and programmed in the ETS version 5 and higher.

YOUR ADVANTAGES WITH

KNX RF USB Stick PC Interface Manufacturer independent, large product selection at over 420 manufacturers.
Worldwide standard (ISO / IEC 14543-3).
Proven compatibility of all certified products.
Decentralized structure: Expandable via cable, radio and IP. More at www.knx.org
PRODUCT OVERVIEW KNX RF ELSNER ELEKTRONIK
Radio communication with 868.3 MHz; KNX RF S-Mode

Mains Mains, 230 V AC KNX RF-MSG-DST Radio Actuator for 1 drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N° 70712
230 V AC 1 STAK3 drive output (1 drive or 1 group)
1 STAS3 mains input for 230 V AC, 50 Hz | 1 STAK3 mains output for supplying additional actuators
Up to 12 actuators and up to 1.5 kW power load per mains connection

Mains KNX RF-MSG-ST Radio Actuator for 1 drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N° 70711

230 V AC
1 STAK3 drive output (1 drive or 1 group)
1 STAS3 mains input for 230 V AC, 50 Hz

Mains
KNX RF-MSG2-DST Radio Actuator for 2 drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N° 70713
230 V AC
2 STAK3 drive outputs (2 drives or 2 groups, controlled separately)
1 STAS3 mains input for 230 V AC, 50 Hz

KNX RF S1R-B2 compact Radio Actuator for 1 drive / 2 consumer loads . . . . . N° 70715
Potenzialfreier Ausgang für 1 Antrieb (1×Auf/Ab) oder 2 Verbraucher (2× Ein/Aus)
Bis 230 V AC, 6 A

KNX RF R1-B2 compact 16A Radio Actuator for 1 consumer load . . . . . . . . . . . . N° 70720
Potenzialfreier Ausgang für 1 Verbraucher (Ein/Aus), bis 230 V AC, 16 A

REMO KNX RF Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N° 70746

Radio remote control with 32 channels
Coloured touch display, buttons can be labelled individually

KNX RF LC-TP Media Coupler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N° 70701

Connects wireless KNX devices (KNX RF) with wired devices (KNX TP), bidirectional communication
Display shows addressing, KNX traffic, telegrams

5m
KNX RF USB STICK PC Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N° 70704
For system setup via KNX RF: addressing, programming, diagnosis. For windows-based PC
5m

Connection Line. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 m N° 60565

1 / 2,5 / 5 m
STAS3 to STAK3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,5 m N° 60566
With STASI securing bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 m N° 60567
1 / 2,5 / 5 m

Mains Line 5 m. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N° 60563

5m
Protective contact plug with STAK3 output and STASI securing bracket

5m

THIS IS HOW EASY THE RADIO ACTUATORS ARE INSTALLED

1 / 2,5 / 5 m
Remote Control
Remo KNX RF
Mains Actuator Actuator
1 / 2,5 / 5 m
230 V AC KNX RF-MSG-DST KNX RF-MSG-ST
230 V Motor
Motor

Additional actuators can be plugged in easily. The maxi-

mum power load per mains connection is 1.5 kW.
The fixed connection of the system to the home mains Roller shutter Awning
network must be set up by an electrician! for example for example

Elsner Elektronik GmbH Sohlengrund 16 75395 Ostelsheim | Germany

N° 50369 Version 24.06.2020 Technical changes and errors excepted www.elsner-elektronik.de