Scribd Logo
Upload

Welcome to Scribd!

  • 2 views

    626077bc1a5f665b40561a40 - DPS 21DB-01DS

    Uploaded by

    aleenmalek2024

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    626077bc1a5f665b40561a40 - DPS 21DB-01DS

    Uploaded by

    aleenmalek2024
    2 views2 pages

    Original Title

    626077bc1a5f665b40561a40_DPS 21DB-01DS

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    2 views2 pages

    626077bc1a5f665b40561a40 - DPS 21DB-01DS

    Uploaded by

    aleenmalek2024

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    TECHNICAL DATA SHEET

    MAIN DATA
    Prime power (PRP) 20.0 (kVA)
    Prime power (PRP) 16.0 (kW)
    Standby power (LTP) 21.5 (kVA)
    Standby power (LTP) 17.0 (kW)
    Voltage, Frequency, pf 415V, 50HZ @ 0.8
    Sound pressure 7m dBA 65.0

    ENGINE ALTERNATOR
    Engine brand DEUTZ Alternator brand Stamford
    Engine model F3M2011 Alternator model S0L2-G
    Cylinders 3 P.R.P. Power 20.0 kVA
    Speed 1500 rpm L.T.P. Power 21.5 kVA
    Cubic capacity 2.33 L Connection Series Star
    Air intake Aspirated Phases 3PH + N
    Standard voltage 12Vdc Winding 12 terminals Winding 311
    SAE 3-11.5 Terminal Number 12 nr.
    BMEP 690 kPa IP Protection 23
    Cooling Oil Electronic regulator AS540
    Flywheel P.R.P. Power 19.4 kW Precision 1.0 +/- %
    Flywheel Standby Power 20.4 kW
    Precision class G2
    Oil Quantity 8.5 L CONTROL SYSTEM
    Engine coolant capacity NA Control system brand COMAP
    Radiator standard ROA Control system model AMF 25
    Heat from radiator 11.3 kW I/O expansion module (optional) BI08-EFCP
    Heat from exhaust 18.1 kW Remote monitoring (optional) GSM/GRPS
    Heat from radiation 0.0 kW Comms. expansion module (optional) RS232/RS485
    Exhaust temperature 540 deg C
    Cooling air flow 30.0 m3/min
    Combustion air flow 0.00 m3/min FUEL CONSUMPTION
    Exhaust gas flow 4.16 m3/min Fuel Cons. @ 100% (LTP) 5.6 l/h
    TA Luft Standard Fuel Cons. @ 100% (PRP) 5.3 l/h
    TA Luft/2 NA Fuel Cons. @ 75% (PRP) 4.0 l/h
    EPA NA Fuel Cons. @ 50% (PRP) 3.1 l/h
    Stage Stage 2 Fuel Cons. @ 25% (PRP) 2.5 l/h
    DIMENSIONS & WEIGHT (ACOUSTIC CANOPY) REFERENCE CONDITIONS
    Length 2030 mm Standard reference condition temp. 25deg C
    Width 945 mm Altitude 100 masl
    Height 1340 mm Relative humidity 30%
    Mass (Dry) 830 kg Atmospheric pressure 100 kpa
    Power factor 0.8 lag
    Balanced load Non-distortional
    Fuel consumption is nominal and refers to specific weight
    BASE FRAME (ACOUSTIC CANOPY)
    0.850kg/l.
    Base frame model B1
    Sound power levels refer to free field conditions:
    Standard bunded tank 90 litres Installation site may influence the values.
    Optional bunded tank 600 litres Dimensions, weights and other specifications contained in
    the technical data sheet and related attachments are
    nominal, subject to tolerances and refer to the model with
    standard equipment. Any optional and additional
    equipment / accessories can modify weight, dimensions
    DIMENSIONS & WEIGHT (OPEN FRAME)
    and performance.
    Length NA
    P.R.P. Prime Power-Continuous power at variable load
    Width NA
    The power that a generator can supply in continuous
    Height NA service at a variable load for an unlimited number of hours
    Mass (Dry) NA per year while respecting the maintenance intervals
    established in the environmental conditions stated by the
    manufacturer according to ISO8528-1. The average power
    supplied over time and any applicable overload must be
    less than the percentages stated by the manufacturer.
    BASE FRAME (OPEN FRAME)
    L.T.P. Limited-time running power-Limited power
    Base frame model NA The maximum power that a generator can supply for a
    Standard bunded tank NA limited time respecting the maintenance intervals
    Optional bunded tank NA established in the environmental conditions stated by the
    manufacturer according to ISO8528-1. The number of
    hours per year is stated by the manufacturer. Overload is
    not permitted.

    For more information please contact your local DEUTZ Power Solutions sales partner.

    DEUTZ AUSTRALIA P/L www.deutz.com.au

    You might also like