Deloro

Wear Solutions

LASER CLADDING WITH

DELORO AND STELLITE ALLOYS
METALLURGICAL BONDING WITH MINIMAL DILUTION
With over 100 years of providing solutions to wear and corrosion problems, Stellite™ has
progressed from originally manufacturing high-quality Stellite™ hardfacing powders, rods,
and wires to providing powders for your laser cladding needs.

LASER CLADDING – PRECISION HARDFACING SOLUTIONS.

• Minimal dilution due to low heat output
• Controlled energy supply possible
• High heating and cooling rates for better microstructure
• No tool wear
• Compact technology
• Providing superior results of hardness, homogeniety, purity,
and microstructure

DELORO WEAR SOLUTIONS – THE RIGHT CHOICE.

• Solution providers rather than just manufacturers
• Proven technology and quality for over a century
• Technical experts for support
• Wide range of alloys
• Customized alloys for your applications*

LASER CLADDING WITH STELLITE™ ALLOYS have found a

wide range of applications across industries. Some of the key
SHIELD GAS applications / industries where we have had sucess are high
pressure gas turbines, diesel engine valves, drainage plough
blade, aerospace, deep drawing tool, mining support braces,
hydraulic cylinder hardfacing, and stainless steel runners.

IF YOU HAVE AN APPLICATION PROBLEM TO SHARE WITH US,

OUR EXPERTS WILL BE EAGER TO RESOLVE IT.
* Note: Customized alloys are based on discussions with company’s representatives.

Stellite™ is a global provider of solutions to wear, heat, and corrosion problems and is a world-class manufacturer of alloy-based
materials and components. Stellite™, Tribaloy™, Nistelle™ , Stelcar™, Jet Kote™, and Delchrome™, are registered trademarks of Kennametal Inc.
 Deloro
DELORO WEAR SOLUTIONS HAS A FULL RANGE OF LASER CLADDING Wear Solutions
POWDERS TO MEET THE INDUSTRIES’ GROWING NEEDS.
TYPICAL LASER POWDERS COME IN THE FOLLOWING MESH SIZES:

NOMINAL
PROCESS GRADE
PARTICLE RANGE
W 150 / 45 μm

WM 180 / 53 μm
PTA AND
LASER DEPOSITION HD 250 / 45 μm

G 125 / 45 μm

K 75 / 20 μm

KS 63 / 20 μm
POWDER WELDING
KX 106 / 20 μm

KG 45 / 20 μm

NOMINAL COMPOSITIONS OF OUR STANDARD ALLOYS ARE LISTED BELOW.

THESE PRODUCTS REPRESENT A SMALL PORTION OF OUR ALLOY REPERTOIRE. IF YOU DON’T SEE IT LISTED, PLEASE ASK.

NOMINAL ANALYSIS OF POWDER HARD-

ALLOY OTHERS UNS NESS
Co Cr W C Ni Mo Fe Si (HRC)
COBALT-BASED ALLOYS (GAS ATOMIZED POWDERS)

Stellite 1 Bal. 30 13 2.5 <2.0 <1.0 <2.0 <2.0 <1.0 R30001 51-60

Stellite 6 Bal. 28.5 4.6 1.2 <2.0 <1.0 <2.0 <2.0 <1.0 R30106 40-46

Stellite 12 Bal. 30 8.5 1.45 <2.0 <1.0 <2.0 <2.0 <1.0 R30012 43-53

Stellite 21 Bal. 27.5 – 0.25 2.6 5.4 <2.0 <2.0 <1.0 R30021 27-40

COBALT-BASED TRIDALOY ALLOYS (GAS ATOMIZED POWDERS)

Tribaloy T-800 Bal. 8.5 – <0.08 <1.5 29 <1.5 2.6 <1.0 – 49-55

NICKEL-BASED SUPERALLOYS (GAS ATOMIZED POWDERS)

Nistelle C22 <2.0 21.5 3 – Bal. 13.5 4 – 0.15% V – –

Nistelle 625 – 21.5 – <1.0 Bal. 9 <1.0 <0.5 3.5% Nb N06625 –

NICKEL-BASED HARDFACING ALLOYS (GAS ATOMIZED POWDERS)

Deloro 40 – 7.5 – <0-3 Bal. – 2.5 3.5 1.7% B N99644 38-42

Deloro 50 – 11 – 0.45 Bal. – 3.3 3.9 2.3% B N99645 48-52

Deloro 55 – 12 – 0.6 Bal. – 4.0 4.0 2.7% B – 52-57

Deloro 60 – 15 – 0.7 Bal. – 4.0 4.4 3.1% B N99646 57-62

IRON-BASED HARDFACING ALLOYS (GAS ATOMIZED POWDERS)

Delchrome 316LC – 17 – <0.03 12 2.5 Bal. 1.0 – S31603 –

Delchrome 410 – 13 – 0.10 – – Bal. – – S4100 –

Delchrome 90 – 27 – 2.75 – – Bal. 0.5 0.5 – –

Delchrome 92 – – – 3.8 0.8 9.8 Bal. 0.5 0.5 – –

Deloro Wear Solutions GmbH manufactures and markets sophisticated alloys in the form of castings, powders, coatings, consumables, and machined parts that
resist wear, corrosion, and abrasion. Information provided in this document is intended only for general guidance about Deloro Wear SolutionsTM products and is the
best information in our possession at the time. Product users may request information about their individual use of our products, but Deloro Wear SolutionsTM does
not warrant or guarantee this information in any way. Selection and purchase of Deloro Wear SolutionsTM products is the sole responsibility of the product user based
on the suitability of each use. Individual applications must be fully evaluated by the user, including compliance with applicable laws, regulations, and non-infringement.
Deloro Wear SolutionsTM cannot know or anticipate the many variables that affect individual product use and individual performance results may vary.
For these reasons, Deloro Wear SolutionsTM does not warrant or guarantee advice or information in this document, assumes no liability regarding the same,
and expressly disclaims any warranty of any kind, including any warranty of fitness for a particular purpose, regarding the same.

Deloro Wear Solutions GmbH | Zur Bergpflege 51 – 53 | 56070 Koblenz │Germany

T +49 (0) 261 8088 0 | F +49 (0) 261 8088 35
Email us at: [email protected] | Visit us at: www.deloro.com