lOMoAR cPSD| 5477448

lOMoAR cPSD| 5477448

EXP.NO:1 IMPLEMENTATION OF LINEAR SEARCH

AIM : To Implement Linear Search. Determine the time required to search for an element. Repeat
the experiment for different values of n, the number of elements in the list to be searched and plot
a graph of the time taken versus n.

ALGORITHM :

1. Declare an array.
2. The linear_search function takes an array arr and an element x as input, and searches
for the element in the array using linear search.
3. If the element is found, it returns the index of the element in the array. Otherwise, it
returns -1.
4. The program defines a list n_values containing different values of n to test the linear
search algorithm on.
5. It then loops through this list, generates a random list of n elements, and searches for a
random element in the list.
6. It measures the time taken to perform the search using the time module, and appends the
time taken to a list time_values.
7. Finally, the program uses matplotlib library to plot a graph of the time taken versus n.
PROGRAM:
import time
import matplotlib.pyplot as plt
import random

def linear_search(arr, x):

for i in range(len(arr)):
if arr[i] == x:
return i
return -1

n_values = [100, 1000, 10000, 100000, 1000000]

time_values = []

for n in n_values:
arr = [random.randint(0, n) for _ in range(n)]
x = random.randint(0, n)
 lOMoAR cPSD| 5477448

start_time = time.time()
linear_search(arr, x)
end_time = time.time()

time_values.append(end_time - start_time)

plt.plot(n_values, time_values)
plt.title('Linear Search')
plt.xlabel('Number of Elements')
plt.ylabel('Time Taken (seconds)')
plt.show()

OUTPUT:
Output 1:
n_values = [100, 1000, 10000, 100000, 1000000]

Output 2 :
n_values = [10, 100, 1000, 1, 10000]
 lOMoAR cPSD| 5477448

Result: Thus the python program for implementation of linear search program was executed and
verified successfully.

EXP.NO:2 IMPLEMENTATION OF RECURSIVE BINARY SEARCH

AIM :
To Implement recursive Binary Search. Determine the time required to search an element.
Repeat the experiment for different values of n, the number of elements in the list to be
searched and plot a graph of the time taken versus n.

ALGORITHM :
 lOMoAR cPSD| 5477448

1. Declare the array.

2. ‘binary_search_recursive’ is a recursive function that takes an array ‘arr’, the lower and
upper bounds of the subarray being searched ‘low ‘and ‘high', and the element being
searched for ‘x’.
3. It returns the index of the element if it is found, or -1 if it is not found.
4. The function ‘test_binary_search_recursive’ generates arrays of different sizes and runs a
binary search for a random element in each array.
5. It records the time taken to run the search and plots it on a graph.
6. The graph shows the time taken to search for an element versus the size of the array being
searched.
7. As the size of the array increases, the time taken to search for an element increases as well,
but the increase is logarithmic since binary search has a time complexity of O(log n).
PROGRAM :

import random
import time
import matplotlib.pyplot as plt

def binary_search_recursive(arr, low, high, x):

if high >= low:
mid = (high + low) // 2

if arr[mid] == x:
return mid

elif arr[mid] > x:

return binary_search_recursive(arr, low, mid - 1, x)

else:
return binary_search_recursive(arr, mid + 1, high, x)

else:
return -1

def test_binary_search_recursive():
for n in [10, 100, 1000, 10000, 100000]:
arr = [random.randint(1, n) for i in range(n)]
arr.sort()
 lOMoAR cPSD| 5477448

start_time = time.time()
x = random.randint(1, n)
result = binary_search_recursive(arr, 0, n-1, x)
end_time = time.time()

if result == -1:
print(f"Element {x} not found in the array")
else:
print(f"Element {x} found at index {result}")

print(f"Time taken to search in array of size {n}: {end_ti

me - start_time}")
print("=" * 50)

plt.scatter(n, end_time - start_time)

plt.title("Recursive Binary Search Performance")

plt.xlabel("Size of Array")
plt.ylabel("Time Taken (in seconds)")
plt.show()

test_binary_search_recursive()

OUTPUT:
Element 4 not found in the array
Time taken to search in array of size 10: 7.3909759521484375e-06
==================================================
Element 31 found at index 36
Time taken to search in array of size 100: 7.867813110351562e-06
==================================================
Element 414 found at index 393
Time taken to search in array of size 1000: 1.9311904907226562e-05
==================================================
Element 4378 not found in the array
Time taken to search in array of size 10000: 4.673004150390625e-05
==================================================
Element 52551 found at index 52435
Time taken to search in array of size 100000: 4.482269287109375e-05
=======================================
 lOMoAR cPSD| 5477448

Result:
Thus the python program for implementation of recursive binary search was executed and
verified successfully.

EXP.NO: 3 PATTERN MATCHING

AIM :

To implement all occurrences of pat [ ] in txt [ ]. You may assume that n > m. Given a text
txt [0...n-1] and a pattern pat [0...m-1], write a function search (char pat [ ], char txt [ ])
 lOMoAR cPSD| 5477448

ALGORITHM :

1. One way to implement the search function is to use the brute-force approach, which
involves comparing each possible substring of the text with the pattern.

2. The algorithm iterates through the text from the first character to the (n-m)th character and
checks whether the pattern matches the substring of the text starting at that position.

3. If a match is found, the function prints the index of the match.

PROGRAM:

def search(pat, txt):

n = len(txt)
m = len(pat)
result = []

# Loop through the text and search for the pattern

for i in range(n-m+1):
j = 0
while(j < m):
if (txt[i+j] != pat[j]):
break
j += 1

# If the entire pattern is found, add the index to the res

ult list
if (j == m):
result. append(i)

return result
txt = "AABAACAADAABAABA"
pat = "AABA"
result = search(pat, txt)
print("Pattern found at indices:", result)
 lOMoAR cPSD| 5477448

OUTPUT:

Pattern found at indices: [0, 9, 12]

Result: Thus the python program implementation of pattern matching was executed and verified
successfully.
 lOMoAR cPSD| 5477448

EXP.NO: 4 IMPLEMENTATION OF INSERTION SORT AND HEAP SORT

AIM :

To Sort a given set of elements using the Insertion sort and Heap sort methods and
determine the time required to sort the elements. Repeat the experiment for different values of n,
the number of elements in the list to be sorted and plot a graph of the time taken versus n.

ALGORITHM:

Algorithm for insertion sort:

1. The insertionSort function takes a list of elements and sorts them using the Insertion sort
algorithm.

2.The generateList function generates a list of n random numbers between 1 and 1000.

3.The measureTime function generates a list of n random numbers, sorts it using the insertionSort
function, and measures the time required to sort the list.

4.The plotGraph function generates a list of n values and calls the measureTime function for each
n value. It then plots a graph of the time required to sort the list versus the value of n.

Algorithm for heap sort:

1. The heapify function takes an array arr, the size of the heap n, and the root index i of the
subtree to heapify. It compares the root node with its left and right children and swaps the root with
the larger child if necessary. The function then recursively calls itself on the subtree with the new
root index.

2. The heapSort function takes an array arr and sorts it using the Heap sort algorithm. It first
builds a max heap by heapifying all subtrees bottom-up. It then repeatedly extracts the maximum
element from the heap and places it at the end of the array.

3. The generateList function generates a list of n random numbers between 1 and 1000.

4. The measureTime function generates a list of n random numbers, sorts it using the heapSort
function, and measures the time required to sort the list.

5. The plotGraph function generates a list of n values and calls the measureTime function for
each n value. It then plots a graph of the time required to sort the list versus the value of n.

PROGRAM:INSERTION SORT
 lOMoAR cPSD| 5477448

import matplotlib.pyplot as plt

import random
import time

def insertionSort(arr):
n = len(arr)
for i in range(1, n):
key = arr[i]
j = i - 1
while j >= 0 and arr[j] > key:
arr[j + 1] = arr[j]
j -= 1
arr[j + 1] = key

# Generate a list of n random numbers

def generateList(n):
return [random.randint(1, 1000) for i in range(n)]

# Measure the time required to sort a list of n elements

def measureTime(n):
arr = generateList(n)
startTime = time.time()
insertionSort(arr)
endTime = time.time()
return endTime - startTime

# Plot a graph of the time required to sort a list of n elements

def plotGraph(nList):
timeList = [measureTime(n) for n in nList]
plt.plot(nList, timeList, 'o-')
plt.xlabel('n')
plt.ylabel('Time (s)')
plt.title('Insertion Sort')
plt.show()
nList = [100, 500, 1000, 2000, 5000, 10000]
plotGraph(nList)

OUTPUT:
 lOMoAR cPSD| 5477448

PROGRAM:HEAPSORT

import matplotlib.pyplot as plt

import random
import time

# Heapify a subtree rooted with node i

def heapify(arr, n, i):
largest = i # Initialize largest as root
l = 2 * i + 1 # left child
r = 2 * i + 2 # right child

# See if left child of root exists and is greater than root

if l < n and arr[i] < arr[l]:
largest = l

# See if right child of root exists and is greater than root

if r < n and arr[largest] < arr[r]:
largest = r
 lOMoAR cPSD| 5477448

# Change root, if needed

if largest != i:
arr[i], arr[largest] = arr[largest], arr[i] # swap

# Heapify the root

heapify(arr, n, largest)

# Heap sort function

def heapSort(arr):
n = len(arr)

# Build a max heap

for i in range(n // 2 - 1, -1, -1):
heapify(arr, n, i)

# Extract elements one by one

for i in range(n - 1, 0, -1):
arr[i], arr[0] = arr[0], arr[i] # swap
heapify(arr, i, 0)

# Generate a list of n random numbers

def generateList(n):
return [random.randint(1, 1000) for i in range(n)]

# Measure the time required to sort a list of n elements

def measureTime(n):
arr = generateList(n)
startTime = time.time()
heapSort(arr)
endTime = time.time()
return endTime - startTime

# Plot a graph of the time required to sort a list of n elements

def plotGraph(nList):
timeList = [measureTime(n) for n in nList]
plt.plot(nList, timeList, 'o-')
plt.xlabel('n')
plt.ylabel('Time (s)')
plt.title('Heap Sort')
plt.show()
nList = [100, 500, 1000, 2000, 5000, 10000]
plotGraph(nList)
 lOMoAR cPSD| 5477448

OUTPUT:
 lOMoAR cPSD| 5477448

RESULT: Thus the . python program for implementation of insertion sort and heap sort was
executed and verified successfully.

EXP.NO: 5 IMPLEMENTATION OF GRAPH TRAVERSAL USING BREADTH FIRST

SEARCH
 lOMoAR cPSD| 5477448

AIM :

To develop a program to implement graph traversal using Breadth First Search.

ALGORITHM:

Step 1:Start by putting any one of the graph's vertices at the back of a queue.

Step 2:Take the front item of the queue and add it to the visited list.

Step 3:Create a list of that vertex's adjacent nodes. Add the ones which aren't in the visited list to the
back of the queue.

Step 4:Keep repeating steps 2 and 3 until the queue is empty.

PROGRAM:
import networkx as nx
graph = {
'5' : ['3','7'],
'3' : ['2', '4'],
'7' : ['8'],
'2' : [],
'4' : ['8'],
'8' : []
}
G = nx.Graph(graph)
nx.draw(G, with_labels = True)
visited = [] # List for visited nodes.
queue = [] #Initialize a queue

def bfs(visited, graph, node): #function for BFS

visited.append(node)
queue.append(node)

# Creating loop to visit each node

while queue:
m = queue.pop(0)
print (m, end = " ")

for neighbour in graph[m]:

if neighbour not in visited:
visited.append(neighbour)
queue.append(neighbour)

# Driver Code
print("Following is the Breadth-First Search")
 lOMoAR cPSD| 5477448

bfs(visited, graph, '5') # function calling

OUTPUT:
Following is the Breadth-First Search
5 3 7 2 4 8

RESULT: Thus the python program for implementation of graph traversal using breadth first search
was executed and verified successfully.

EXP.NO: 6 IMPLEMENTATION OF GRAPH TRAVERSAL USING DEPTH FIRST

SEARCH

AIM :
 lOMoAR cPSD| 5477448

To develop a program to implement graph traversal using Depth First Search.

ALGORITHM :
Step 1: Start by putting any one of the graph's vertices on top of a stack.

Step 2:Take the top item of the stack and add it to the visited list.

Step 3:Create a list of that vertex's adjacent nodes. Add the ones which aren't in the visited
list to the top of the stack.

Step 4:Keep repeating steps 2 and 3 until the stack is empty.

PROGRAM :
# Using adjacency list
g = {
'5' : ['3','7'],
'3' : ['2', '4'],
'7' : ['8'],
'2' : [],
'4' : ['8'],
'8' : []
}
G = nx.Graph(g)
nx.draw(G, with_labels = True)
visited = set()
# Set to keep track of visited nodes of graph.

def dfs(visited, g, node): dfs

if node not in visited:
print (node)
visited.add(node)
for neighbour in g[node]:
dfs(visited, g, neighbour)
# Driver Code
print("Following is the Depth-First Search")
dfs(visited, g, '5')

OUTPUT:
 lOMoAR cPSD| 5477448

Following is the Depth-First Search

5
3
2
4
8
7

RESULT: Thus the python program for implementation of graph traversal using breadth first search
was executed and verified successfully.
EXP.NO: 7 IMPLEMENTATION OF DIJIKSTRA’S ALGORITHM
 lOMoAR cPSD| 5477448

AIM: To develop a program to find the shortest paths to other vertices using Dijkstra’s algorithm.

ALGORITHM :

1. First, we define a function ‘dijkstra’ that takes three arguments: the graph represented as an
adjacency matrix, the starting vertex src, and the number of vertices in the graph n.

2. The function returns a list of shortest distances from the source vertex to all other vertices in the
graph.

PROGRAM:

# importing network
import networkx as nx
import pylab
import matplotlib.pyplot as plt

# Create an empty Undirected Weighted Graph

G = nx.Graph()

nodes_list = [1, 2, 3, 4, 5, 6, 7]
G.add_nodes_from(nodes_list)

# Add weighted edges

edges_list = [(1, 2, 13),(1, 4, 4),(2, 3, 2),(2, 4, 6), (2, 5, 4),
(3, 5, 5),
(3, 6, 6),(4, 5, 3),(4, 7, 4), (5, 6, 8), (5, 7, 7),
(6, 7, 3)]
G.add_weighted_edges_from(edges_list)

plt.figure()
pos = nx.spring_layout(G)
weight_labels = nx.get_edge_attributes(G,'weight')
nx.draw(G,pos,font_color = 'white', node_shape = 's', with_labels
= True,)
nx.draw_networkx_edge_labels(G,pos,edge_labels=weight_labels)

pos = nx.planar_layout(G)

#Give us the shortest paths from node 1 using the weights from the
edges.
p1 = nx.shortest_path(G, source=1, weight="weight")

# This will give us the shortest path from node 1 to node 6.

 lOMoAR cPSD| 5477448

p1to6 = nx.shortest_path(G, source=1, target=6, weight="weight")

# This will give us the length of the shortest path from node 1 to
node 6.
length = nx.shortest_path_length(G, source=1, target=6, weight="we
ight")

print("All shortest paths from 1: ", p1)

print("Shortest path from 1 to 6: ", p1to6)
print("Length of the shortest path: ", length)

OUTPUT:

All shortest paths from 1: {1: [1], 2: [1, 4, 2], 4: [1, 4], 5: [1, 4, 5], 7:
[1, 4, 7], 3: [1, 4, 5, 3], 6: [1, 4, 7, 6]}
Shortest path from 1 to 6: [1, 4, 7, 6]
Length of the shortest path: 11
 lOMoAR cPSD| 5477448

RESULT: Thus the python program to find the shortest paths to other vertices using Dijkstra’s
algorithm was executed and verified successfully.

EX.NO:8 IMPLEMENTATION OF PRIM’S ALGORITHM

AIM:
To Find the minimum cost spanning tree of a given undirected graph using Prim’s algorithm.

ALGORITHM :

Step 1: Determine the arbitrary starting vertex.

 lOMoAR cPSD| 5477448

Step 2: Keep repeating steps 3 and 4 until the fringe vertices (vertices not included in MST) remain.

Step 3: Select an edge connecting the tree vertex and fringe vertex having the minimum weight.

Step 4: Add the chosen edge to MST if it doesn’t form any closed cycle.

Step 5: Exit

PROGRAM :

import matplotlib.pyplot as plt

import networkx as nx
import pylab

# Create an empty Undirected Weighted Graph

G = nx.Graph()

# Add nodes
nodes_list = [1, 2, 3, 4, 5, 6, 7]
G.add_nodes_from(nodes_list)

# Add weighted edges

edges_list = [(1, 2, 1), (1, 4, 4), (2, 3, 2), (2, 4, 6), (2, 5, 4
), (3, 5, 5),
(3, 6, 6), (4, 5, 3), (4, 7, 4), (5, 6, 8), (5, 7, 7
), (6, 7, 3)]
G.add_weighted_edges_from(edges_list)

pos=nx.spring_layout(G)
pylab.figure(1)
nx.draw(G,pos, with_labels= 'true')
# use default edge labels
nx.draw_networkx_edge_labels(G,pos)

# Calculate a minimum spanning tree of an undirected weighted grap

h with
# the Prim algorithm
mst = nx.minimum_spanning_tree(G, algorithm='prim')
print(sorted(mst.edges(data=True)))
 lOMoAR cPSD| 5477448

OUTPUT:

[(1, 2, {'weight': 1}), (1, 4, {'weight': 4}), (2, 3, {'weight': 2}), (4, 5,
{'weight': 3}), (4, 7, {'weight': 4}), (6, 7, {'weight': 3})]
 lOMoAR cPSD| 5477448

RESULT: Thus the python program for implementation of minimum cost spanning tree of a given
undirected graph using Prim’s algorithm

EX.NO:9 IMPLEMENTATION OF FLOYD’S ALGORITHM FOR THE ALL-PAIRS-

SHORTEST- PATHS PROBLEM

AIM: To Implement Floyd’s algorithm for the All-Pairs- Shortest-Paths problem.

ALGORITHM:

Step1: In this program, INF represents infinity, and the floyd_algorithm function takes in a
weighted graph represented as a two-dimensional list where graph[i][j] is the weight of the edge
from vertex i to vertex j.
 lOMoAR cPSD| 5477448

Step:2 The function returns a two-dimensional list dist where dist[i][j] is the shortest path from
vertex i to vertex j.

Step:3 The algorithm first initializes the dist list with the weights of the edges in the graph. It then
uses three nested loops to find the shortest path from vertex i to vertex j through vertex k.

Step:4 If the path through k is shorter than the current shortest path from i to j, it updates dist[i][j]
with the new shortest path.

Step:5 Finally, the program calls the floyd_algorithm function on a sample input graph and prints
the resulting dist list.

PROGRAM:

INF = float('inf')

def floyd_algorithm(graph):
n = len(graph)
dist = [[INF for j in range(n)] for i in range(n)]

for i in range(n):
for j in range(n):
if graph[i][j] != 0:
dist[i][j] = graph[i][j]

for k in range(n):
for i in range(n):
for j in range(n):
if dist[i][k] + dist[k][j] < dist[i][j]:
dist[i][j] = dist[i][k] + dist[k][j]

return dist

# Sample input
graph = [
[0, 5, INF, 10],
[INF, 0, 3, INF],
[INF, INF, 0, 1],
[INF, INF, INF, 0]
]

# Run the algorithm and print the result

 lOMoAR cPSD| 5477448

result = floyd_algorithm(graph)
for row in result:
print(row)

OUTPUT:

[inf, 5, 8, 9]
[inf, inf, 3, 4]
[inf, inf, inf, 1]
[inf, inf, inf, inf]

RESULT: Thus the python program for implementation of Floyd’s algorithm for the All-Pairs- Shortest-
Paths problem was executed and verified successfully.

EX.NO:10 COMPUTE THE TRANSITIVE CLOSURE OF A DIRECTED GRAPH USING

WARSHALL'S ALGORITHM

AIM: To Compute the transitive closure of a given directed graph using Warshall's algorithm.

ALGORITHM:
 lOMoAR cPSD| 5477448

Step1: In this program, graph is a two-dimensional list representing the directed graph where
graph[i][j] is 1 if there is an edge from vertex i to vertex j, and 0 otherwise.

Step2: The warshall_algorithm function returns a two-dimensional list representing the transitive
closure of the input graph.

Step3: The algorithm first creates a copy of the input graph as the initial transitive closure. It then
uses three nested loops to update the transitive closure by checking if there is a path from vertex i to
vertex j through vertex k. If there is, it sets transitive_closure[i][j] to 1.

Step4: Finally, the program calls the warshall_algorithm function on a sample input graph and
prints the resulting transitive closure.

PROGRAM:

def warshall_algorithm(graph):
n = len(graph)

# Create a copy of the original graph

transitive_closure = [row[:] for row in graph]

# Compute the transitive closure using Warshall's algorithm

for k in range(n):
for i in range(n):
for j in range(n):
transitive_closure[i][j] = transitive_closure[i]
[j] or (transitive_closure[i][k] and transitive_closure[k][j])

return transitive_closure

# Sample input
graph = [
[0, 1, 0, 0],
[0, 0, 1, 0],
[0, 0, 0, 1],
[1, 0, 0, 0]
]

# Run the algorithm and print the result

result = warshall_algorithm(graph)
for row in result:
print(row)
 lOMoAR cPSD| 5477448

OUTPUT:

[1, 1, 1, 1]
[1, 1, 1, 1]
[1, 1, 1, 1]
[1, 1, 1, 1]

RESULT: Thus the python program to Compute the transitive closure of a given directed graph using
Warshall's algorithm was executed and verified successfully.

EX.NO:11 IMPLEMENTATION OF FINDING THE MAXIMUM AND MINIMUM

NUMBERS IN A IST USING DIVIDE AND CONQUER TECHNIQUE

AIM: To Develop a program to find out the maximum and minimum numbers in a given list of
n numbers using the divide and conquer technique.

ALGORITHM:
 lOMoAR cPSD| 5477448

Step1: The find_max_min function recursively divides the list into two halves until the
base cases are reached (when the list contains only one or two elements).

Step2: In the base case, the maximum and minimum numbers are returned.

Step3: In the recursive case, the maximum and minimum numbers of the left and right
halves are computed and the maximum and minimum of the whole list is returned using the
max and min functions.

PROGRAM:

def find_max_min(arr):
if len(arr) == 1:
return arr[0], arr[0]
elif len(arr) == 2:
if arr[0] > arr[1]:
return arr[0], arr[1]
else:
return arr[1], arr[0]
else:
mid = len(arr) // 2
left_max, left_min = find_max_min(arr[:mid])
right_max, right_min = find_max_min(arr[mid:])
return max(left_max, right_max), min(left_min, right_min)

# Example usage
arr = [3, 1, 5, 2, 9, 7]
max_num, min_num = find_max_min(arr)
print("Maximum number:", max_num)
print("Minimum number:", min_num)

OUTPUT:

Maximum number: 9
Minimum number: 1
 lOMoAR cPSD| 5477448

RESULT: Thus the python program for find out the maximum and minimum numbers in a
given list of n numbers using the divide and conquer technique was executed and verified
successfully.

EX.NO:12(A) IMPLEMENTATION OF MERGE SORT

AIM: To Implement Merge sort method to sort an array of elements and determine the time
required to sort. Repeat the experiment for different values of n, the number of elements in the
list to be sorted and plot a graph of the time taken versus n.

ALGORITHM:
 lOMoAR cPSD| 5477448

Step1: The program first defines the merge_sort() function which implements the Merge sort
algorithm.

Step2: It then defines a test_merge_sort() function which generates a list of n random

numbers, sorts the list using Merge sort, and measures the time required to sort the list.

Step3: Finally, the program tests the test_merge_sort() function for different values of n and
plots a graph of the time taken versus n using the Matplotlib library.

PROGRAM:

import random
import time
import matplotlib.pyplot as plt

def merge_sort(arr):
if len(arr) > 1:
mid = len(arr) // 2
left_half = arr[:mid]
right_half = arr[mid:]

merge_sort(left_half)
merge_sort(right_half)

i = j = k = 0

while i < len(left_half) and j < len(right_half):

if left_half[i] < right_half[j]:
arr[k] = left_half[i]
i += 1
else:
arr[k] = right_half[j]
j += 1
k += 1

while i < len(left_half):

arr[k] = left_half[i]
i += 1
k += 1

while j < len(right_half):

arr[k] = right_half[j]
j += 1
k += 1
 lOMoAR cPSD| 5477448

def test_merge_sort(n):
arr = [random.randint(1, 100) for _ in range(n)]
start_time = time.time()
merge_sort(arr)
end_time = time.time()
return end_time - start_time

if name == ' main ':

ns = [10, 100, 1000, 10000, 100000]
times = []
for n in ns:
t = test_merge_sort(n)
times.append(t)
print(f"Merge sort took {t:.6f} seconds to sort {n} elements.")

plt.plot(ns, times, 'o-')

plt.xlabel('Number of elements (n)')
plt.ylabel('Time taken (s)')
plt.title('Merge Sort')
plt.show()

OUTPUT:

Merge sort took 0.000020 seconds to sort 10 elements.

Merge sort took 0.000249 seconds to sort 100 elements.
Merge sort took 0.003046 seconds to sort 1000 elements.
Merge sort took 0.021679 seconds to sort 10000 elements.
Merge sort took 0.283631 seconds to sort 100000 elements.
 lOMoAR cPSD| 5477448

RESULT: Thus the python program for Implementation of Merge sort method to sort an
array of elements and determine the time required to sort. Repeat the experiment for different
values of n, the number of elements in the list to be sorted and plot a graph of the time taken
versus n was executed and verified successfully.
 lOMoAR cPSD| 5477448

EX.NO:12(B) IMPLEMENTATION OF QUICK SORT

AIM: To Implement Quick sort method to sort an array of elements and determine the time
required to sort. Repeat the experiment for different values of n, the number of elements in the
list to be sorted and plot a graph of the time taken versus n.

ALGORITHM:

Step1: This program generates a list of random integers of size n , sorts the list using the quicksort
function, and measures the time required to sort the list.

Step2: It repeats this process num_repeats times and returns the average time taken.

Step3: The main function of the program tests the measure_time function for different values of n
and plots a graph of the time taken versus n.

Step4: The maximum value of n is set to max_n, and the step size between values of n is set to
step_size .

Step5: The program uses the built-in random and time modules to generate random integers and
measure time, respectively. Additionally, the quicksort function is implemented recursively and
sorts the list in ascending order.

PROGRAM:

import random
import time

def quicksort(arr):
if len(arr) <= 1:
return arr
pivot = arr[0]
left = []
right = []
for i in range(1, len(arr)):
if arr[i] < pivot:
left.append(arr[i])
else:
right.append(arr[i])
return quicksort(left) + [pivot] + quicksort(right)

def measure_time(n, num_repeats):

times = []
for _ in range(num_repeats):
 lOMoAR cPSD| 5477448

arr = [random.randint(0, 1000000) for _ in range(n)]

start_time = time.time()
quicksort(arr)
end_time = time.time()
times.append(end_time - start_time)
return sum(times) / len(times)

if name == ' main ':

num_repeats = 10
max_n = 10000
step_size = 100
ns = range(0, max_n + step_size, step_size)
times = []
for n in ns:
if n == 0:
times.append(0)
else:
times.append(measure_time(n, num_repeats))
print(times)

OUTPUT:

[0, 0.00013625621795654297, 0.0006334543228149414, 0.000517892837524414,

0.0009247779846191407, 0.000916147232055664, 0.0010011672973632812,]

RESULT: Thus the implementation of Quick sort method to sort an array of elements and
determine the time required to sort. Repeat the experiment for different values of n, the
number of elements in the list to be sorted and plot a graph of the time taken versus n was
executed and verified successfully.
 lOMoAR cPSD| 5477448

EX.NO:13 IMPLEMENTATION OF N QUEENS PROBLEM USING BACKTRACKING

AIM: To Implement N Queens problem using Backtracking.

ALGORITHM:

Step1: The is_safe function checks whether a queen can be placed in the current cell without
conflicting with any other queens on the board.

Step2: The solve_n_queens function places queens one by one in each column, starting from the
leftmost column. If all queens are placed successfully, it returns True. Otherwise, it backtracks and
removes the queen from the current cell and tries to place it in a different row in the same column.

Step3: The print_board function prints the final board configuration after all queens have been
placed.

Step4: The n_queens function initializes the board and calls the solve_n_queens function to solve
the N Queens problem. If a solution exists, it prints the board configuration. Otherwise, it prints a
message indicating that a solution does not exist.

PROGRAM:

def is_safe(board, row, col, n):

# Check if there is any queen in the same row
for i in range(col):
if board[row][i] == 1:
return False
# Check upper diagonal on left side
for i, j in zip(range(row, -1, -1), range(col, -1, -1)):
if board[i][j] == 1:
return False
# Check lower diagonal on left side
for i, j in zip(range(row, n), range(col, -1, -1)):
if board[i][j] == 1:
return False
return True

def solve_n_queens(board, col, n):

if col == n:
# All queens have been placed successfully
return True
for row in range(n):
if is_safe(board, row, col, n):
# Place the queen in the current cell
 lOMoAR cPSD| 5477448

board[row][col] = 1
# Recur to place rest of the queens
if solve_n_queens(board, col + 1, n):
return True
# Backtrack and remove the queen from the current cell
board[row][col] = 0
return False

def print_board(board, n):

for i in range(n):
for j in range(n):
print(board[i][j], end=" ")
print()

def n_queens(n):
# Initialize the board
board = [[0 for j in range(n)] for i in range(n)]
if not solve_n_queens(board, 0, n):
print("Solution does not exist.")
return False
print("Solution:")
print_board(board, n)
return True

if name == " main ":

n = int(input("Enter the number of queens: "))
n_queens(n)

OUTPUT:

Enter the number of queens: 4

Solution:
0 0 1 0
1 0 0 0
0 0 0 1
0 1 0 0
lOMoAR cPSD| 5477448
 lOMoAR cPSD| 5477448

RESULT: Thus the python program for Implementation of N Queens problem using Backtracking
Technique was executed and verified successfully.

EX.NO:14 IMPLEMENTATION OF ANY SCHEME TO FIND THE OPTIMAL

SOLUTION FOR THE TRAVELING SALESPERSON PROBLEM

AIM: To Implement any scheme to find the optimal solution for the Traveling Salesperson problem
and then solve the same problem instance using any approximation algorithm and determine the error
in the approximation.

ALGORITHM:

The following steps involved in solving TSP using branch and bound:
1. Construct a complete graph with the given cities as vertices, where the weight of each edge is
the distance between the two cities.
2. Initialize the lower bound to infinity and create an empty path.
3. Choose a starting vertex and add it to the path.
4. For each remaining vertex, compute the lower bound for the path that includes this vertex and
add it to the priority queue.
5. While the priority queue is not empty, select the path with the lowest lower bound and extend it
by adding the next vertex.
6. Update the lower bound for the new path and add it to the priority queue.
7. If all vertices have been added to the path, update the lower bound to the length of the complete
tour and update the optimal tour if the new tour is shorter.
8. Backtrack to the previous vertex and explore other paths until all paths have been explored.

PROGRAM:
import itertools
import math
import time

# Function to calculate the distance between two cities

def distance(city1, city2):
return math.sqrt((city1[0] - city2[0])**2 + (city1[1] - city2[
1])**2)

# Function to find the optimal solution using brute force

 lOMoAR cPSD| 5477448

def tsp_brute_force(cities):
# Calculate all possible permutations of the cities
permutations = itertools.permutations(cities)

# Initialize the shortest path to infinity

shortest_path = float('inf')

# Iterate over all permutations to find the shortest path

for permutation in permutations:
path_length = 0
for i in range(len(permutation)-1):
path_length += distance(permutation[i], permutation[i+
1])
path_length += distance(permutation[-1], permutation[0])

# Update the shortest path if the current path is shorter

if path_length < shortest_path:
shortest_path = path_length
shortest_path_order = permutation

return shortest_path, shortest_path_order

# Function to find the approximate solution using the nearest neig

hbor algorithm
def tsp_nearest_neighbor(cities):
# Start with the first city in the list as the current city
current_city = cities[0]
visited_cities = [current_city]

# Iterate over all cities to find the nearest neighbor

while len(visited_cities) < len(cities):
nearest_neighbor = None
nearest_distance = float('inf')
for city in cities:
if city not in visited_cities:
distance_to_city = distance(current_city, city)
if distance_to_city < nearest_distance:
nearest_distance = distance_to_city
nearest_neighbor = city

# Add the nearest neighbor to the visited cities

visited_cities.append(nearest_neighbor)
current_city = nearest_neighbor

# Calculate the total distance of the path

 lOMoAR cPSD| 5477448

total_distance = 0
for i in range(len(visited_cities)-1):
total_distance += distance(visited_cities[i], visited_citi
es[i+1])
total_distance += distance(visited_cities[-1], visited_cities[
0])

return total_distance, visited_cities

# Generate a list of random cities

cities = [(0, 0), (1, 1), (2, 2), (3, 3), (4, 4), (5, 5), (6, 6),
(7, 7), (8, 8), (9, 9)]

# Find the optimal solution using brute force

start_time = time.time()
optimal_path_length, optimal_path_order = tsp_brute_force(cities)
end_time = time.time()
print("Optimal path length:", optimal_path_length)
print("Optimal path order:", optimal_path_order)
print("Time taken (brute force):", end_time - start_time, "seconds
")

# Find the approximate solution using the nearest neighbor algorit

hm
start_time = time.time()
approximate_path_length, approximate_path_order = tsp_nearest_neig
hbor(cities)
end_time = time.time()

OUTPUT:
Optimal path length: 25.455844122715707
Optimal path order: ((0, 0), (1, 1), (2, 2), (4, 4), (5, 5), (8,
8), (9, 9), (7, 7), (6, 6), (3, 3))
Time taken (brute force): 45.78943109512329 seconds
 lOMoAR cPSD| 5477448

RESULT: Thus the python program for implementation of any scheme to find the optimal solution
for the Traveling Salesperson problem and then solve the same problem instance using any
 lOMoAR cPSD| 5477448

approximation algorithm and determine the error in the approximation was executed and verified
successfully.

EX.NO:15 IMPLEMENTATION OF RANDOMIZED ALGORITHMS FOR FINDING

THE KTH SMALLEST NUMBER

AIM: To Implement randomized algorithms for finding the kth smallest number.

ALGORITHM:

1. The partition() function takes an array arr, low index low, and high index high as input
and partitions the array around a randomly chosen pivot. It returns the index of the pivot element.
2. The randomized_select() function takes an array arr, low index low, high index high, and
the value of k as input and returns the kth smallest element in the array. It first selects a random
pivot element using random.randint() function and partitions the array using the partition()
function. Then it recursively calls itself on either the left or right partition depending on the position
of the pivot element.
3. In the main section, we define an array arr and the value of k. Then we calculate the length
of the array n and call the randomized_select() function on the array to find the kth smallest
element.

PROGRAM:

import random

# Function to partition the array around a pivot

def partition(arr, low, high):
i = low - 1
pivot = arr[high]
for j in range(low, high):
if arr[j] <= pivot:
i += 1
arr[i], arr[j] = arr[j], arr[i]
arr[i+1], arr[high] = arr[high], arr[i+1]
return i+1
 lOMoAR cPSD| 5477448

# Function to find the kth smallest number using randomized

algorithm
def randomized_select(arr, low, high, k):
if low == high:
return arr[low]
pivot_index = random.randint(low, high)
arr[pivot_index], arr[high] = arr[high], arr[pivot_index]
index = partition(arr, low, high)
if k == index:
return arr[k]
elif k < index:
return randomized_select(arr, low, index-1, k)
else:
return randomized_select(arr, index+1, high, k)

# Testing the function

arr = [9, 4, 2, 7, 3, 6]
k = 3
n = len(arr)
result = randomized_select(arr, 0, n-1, k-1)
print(f"The {k}th smallest number is: {result}")

OUTPUT:

The 3th smallest number is: 4

lOMoAR cPSD| 5477448
 lOMoAR cPSD| 5477448

RESULT: Thus the python program for implementation of randomized algorithms for finding the kth
smallest number was executed and verified successfully.