Scribd Logo
Upload

Welcome to Scribd!

  • 12 views

    6EP19613BA21 Datasheet en

    Uploaded by

    Alfian Alfath

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    6EP19613BA21 Datasheet en

    Uploaded by

    Alfian Alfath
    12 views3 pages

    Original Title

    6EP19613BA21_datasheet_en

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    12 views3 pages

    6EP19613BA21 Datasheet en

    Uploaded by

    Alfian Alfath

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Data sheet 6EP1961-3BA21

    SITOP PSE202U/Redundancy M./DC24V/40A

    SITOP PSE202U redundancy module input/output: 24 V DC/40 A suitable for


    decoupling two SITOP power supplies with maximal per 20 A output current

    input
    type of the power supply network DC voltage
    supply voltage at DC 24 ... 24 V
    input voltage at DC 24 ... 28.8 V
    output
    voltage curve at output Controlled, isolated DC voltage
    output voltage at DC rated value 24 V
    formula for output voltage Vin - approx. 0.5 V
    output voltage
    ● at output 1 at DC rated value 24 V
    output voltage adjustable No
    display version for normal operation Green LED for "both Input voltages > switching threshold"; red LED: for "at
    least one input voltage < switching threshold"
    type of signal at output Isolated relay contact (changeover contacts, rating 8 A/240 V AC, 24 V DC):
    Signals OK if both input voltages > switching threshold, setting range of
    threshold 20 ... 25 V
    output current
    ● rated value 40 A
    ● rated range 40 A; max. aggregate current 40 A; +60 ... +70 °C: derating 3%/K
    efficiency
    efficiency in percent 96.6 %
    power loss [W]
    ● at rated output voltage for rated value of the output 34 W
    current typical
    ● during no-load operation maximum 1.5 W
    safety
    galvanic isolation yes, SELV acc. to EN 60950-1 (relay contact)
    operating resource protection class Class III
    protection class IP IP20
    standard
    ● for emitted interference EN 55022 Class B
    ● for interference immunity EN 61000-6-2
    standards, specifications, approvals
    certificate of suitability
    ● CE marking Yes
    ● UL approval Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259
    ● CSA approval Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259
    ● EAC approval Yes
    ● NEC Class 2 No
    type of certification
    ● CB-certificate No

    6EP19613BA21 Subject to change without notice


    5/24/2024
    Page 1/3 © Copyright Siemens
    MTBF at 40 °C 6 471 654 h
    standards, specifications, approvals hazardous environments
    certificate of suitability
    ● IECEx No
    ● ATEX No
    ● ULhazloc approval No
    ● cCSAus, Class 1, Division 2 No
    ● FM registration No
    standards, specifications, approvals marine classification
    shipbuilding approval Yes
    Marine classification association
    ● American Bureau of Shipping Europe Ltd. (ABS) Yes
    ● French marine classification society (BV) No
    ● Det Norske Veritas (DNV) Yes
    ● Lloyds Register of Shipping (LRS) No
    ambient conditions
    ambient temperature
    ● during operation -25 ... +60 °C; with natural convection
    ● during transport -40 ... +85 °C
    ● during storage -40 ... +85 °C
    environmental category according to IEC 60721 Climate class 3K3, 5 ... 95% no condensation
    connection method
    type of electrical connection screw terminal
    ● at input Input, output and ground: 1 screw terminal each for 0.33 ... 10 mm² single-
    core/finely stranded
    ● for auxiliary contacts Relay contact: 3 screw terminals for 0.5 ... 2.5 mm² single-core/finely stranded
    mechanical data
    width × height × depth of the enclosure 70 × 120
    installation width × mounting height 70 mm
    required spacing
    ● top 50 mm
    ● bottom 50 mm
    ● left 0 mm
    ● right 0 mm
    fastening method Snaps onto DIN rail EN 60715 35x7.5/15
    ● standard rail mounting Yes
    ● S7 rail mounting No
    ● wall mounting No
    housing can be lined up Yes
    net weight 0.5 kg
    further information internet links
    internet link
    ● to website: Industry Mall https://mall.industry.siemens.com
    ● to web page: selection aid TIA Selection Tool https://siemens.com/tst
    ● to website: Industrial communication http://www.siemens.com/simatic-net
    ● to website: CAx-Download-Manager http://www.siemens.com/cax
    ● to website: Industry Online Support https://support.industry.siemens.com
    additional information
    other information Specifications at rated input voltage and ambient temperature +25 °C (unless
    otherwise specified)
    security information
    security information Siemens provides products and solutions with industrial cybersecurity functions
    that support the secure operation of plants, systems, machines and networks.
    In order to protect plants, systems, machines and networks against cyber
    threats, it is necessary to implement – and continuously maintain – a holistic,
    state-of-the-art industrial cybersecurity concept. Siemens’ products and
    solutions constitute one element of such a concept. Customers are responsible
    for preventing unauthorized access to their plants, systems, machines and
    networks. Such systems, machines and components should only be connected
    to an enterprise network or the internet if and to the extent such a connection is
    necessary and only when appropriate security measures (e.g. firewalls and/or
    network segmentation) are in place. For additional information on industrial
    cybersecurity measures that may be implemented, please visit
    www.siemens.com/cybersecurity-industry. Siemens’ products and solutions
    undergo continuous development to make them more secure. Siemens strongly

    6EP19613BA21 Subject to change without notice


    5/24/2024
    Page 2/3 © Copyright Siemens
    recommends that product updates are applied as soon as they are available
    and that the latest product versions are used. Use of product versions that are
    no longer supported, and failure to apply the latest updates may increase
    customer’s exposure to cyber threats. To stay informed about product updates,
    subscribe to the Siemens Industrial Cybersecurity RSS Feed under
    https://www.siemens.com/cert. (V4.7)
    Classifications
    Version Classification

    eClass 14 27-04-07-01
    eClass 12 27-04-07-01
    eClass 9.1 27-04-07-01
    eClass 9 27-04-07-01
    eClass 8 27-04-90-02
    eClass 7.1 27-04-90-02
    eClass 6 27-04-90-02
    ETIM 9 EC002540
    ETIM 8 EC002540
    ETIM 7 EC002540
    IDEA 4 4130
    UNSPSC 15 39-12-10-04

    Approvals Certificates
    General Product Approval Marine / Shipping

    Manufacturer Declara- Declaration of Con-


    tion formity

    Marine / Shipping

    last modified: 5/22/2024

    6EP19613BA21 Subject to change without notice


    5/24/2024
    Page 3/3 © Copyright Siemens

    You might also like