Gseup Se63 2211220337 FSR Form
Gseup Se63 2211220337 FSR Form
Gseup Se63 2211220337 FSR Form
G S Engineers
Machine Details
Machine Working Place Machine Model Machine Number
Shrawasti, bhinga CLG4180D-24M LGI4180DCLN008570
Machine working application Engine Model Engine Serial Number
Leveling QSB7 90118955
Date of Commission Operation Hours Working application
06/11/2020 1211.3 Road project
Customer Complaint Date Time 13/07/2022 16:16
(DD/MM/YYYY HH:MM)
Service Engineer Attend Date Time 14/07/2022 09:21
(DD/MM/YYYY HH:MM)
Service Complete Date Time 14/07/2022 18:45
(DD/MM/YYYY HH:MM)
2500 hours service and
Customer Complaint schedule maintenance visit
On registering the complaint of the customer, I reached the site and attended the machine and then I
checked the machine and found that 2500 hours of service and maintenance visit is to be done, then I
parked the machine at a level place and checked the engine oil level Found correct then checked engine oil
filter then checked fuel water separator filter then opened and cleaned fuel strainer filter checked fuel filter
then fuel supply line washed with diesel and air cleaned then air filter inner and outer dust Cleaned then
checked engine oil gauge level found ok, then checked coolant level found ok, then checked transmission
oil filter no looseness and leak found, then checked hydraulic oil hose leakage no leak found hydraulic tank
air removed the filter after that i checked axle oil level crown and right and left gauge of tandem found full
then checked swing motor oil found full then checked brake oil and brake system working fine then
checked electrical system and found correct then check air retraction Checked and found correct then
Action Taken check fuel supply no leakage and fuel is pumping at correct speed Check tire pressure and found correct
then check tandem hub clearance found correct Brake system checked and found correct then check air
condition system did and a. C. Checked filter found correct and checked gas found correct Checked by
venting air from air tank then checked nuts and bolts for looseness and found correct then checked
greasing points and filled with grease Checked instrument cluster and error indication No error indication
was found after checking,
after that I started the machine and started it on idle and high RPM and then checked it by running it on
load and the machine is working properly.
Service Complaint & Parts Enquiry
Spare Parts Department
Enquirer Name Contact Number Part Manager Name Contact Number
Mr. Naeem 918756889686
Service Department
Customer Care Name Contact Number Service Manager Name Contact Number
LIUGONG INDIA PRIVATE LIMITED 18001033852 Mr. Umesh Sharma 916387803574
Parts Replaced
Part Number / Description Qty
Attachment Details
Part Number / Description Failed Part New Part
Parts Recommended
Dealer: G S Engineers,H No. 4/623, Sector-4 Near Axis Bank Gomti Nagar Extension,Lucknow-226010 Uttar Pradesh
LiuGong India Pvt. Ltd., 82,Okhla Industrial Estate,Phase III New Delhi-110020 Delhi
LiuGong India Pvt. Ltd. G S Engineers
Part Number / Description Qty
Service Engineer Name Mr Hariom location Lucknow Machine Owner Name Mr. Ram op.
Dealer: G S Engineers,H No. 4/623, Sector-4 Near Axis Bank Gomti Nagar Extension,Lucknow-226010 Uttar Pradesh
LiuGong India Pvt. Ltd., 82,Okhla Industrial Estate,Phase III New Delhi-110020 Delhi