2–2 Bosch Rexroth AG RFID systems 3 842 541 004 (2012-12)

RFID system ID 200

RFID system ID 200

125 kHz 13,56 MHz

The RFID system ID 200 is a modular

identification system developed
for industrial use in production
environments. The system consists
of mobile data tags, antennas
and communication modules. It is
characterized by the robust and compact
construction of its components, as well
as by particularly interference-resistant
and safe data transmission.
ID 200 is ideal for applications with
central or decentralized data storage.
The mobile data tags with cost-effective
EEPROM memory are very small and
suitable for applications with low data
volume. The design with FRAM memory
is able to store larger data quantities
decentrally and can be read/written
00133431
almost an indefinite number of times.
They are preferable for applications with
short transmission times. Antennas are
available in various construction designs
and transmission frequencies. This
allows the best design to be selected for
each application and installation location.
The communication modules connect
the antennas and the master control
system. They can control up to two
antennas simultaneously, even with
different frequencies. The interface
to the control system can be either
PROFIBUS DP or Ethernet.
3 842 541 004 (2012-12) RFID systems Bosch Rexroth AG 2–3

RFID system ID 200

1
MDT...H  2‑6, 2-7
2
2 3
4
MDT...L  2‑5
1
3 5
6
4 7
 2‑4
5 8

6
9
10
11
12
13
00133483

14
1 Mobile data tags MDT...L for 125 kHz. 3 Flat antennas A...F for 125 kHz or 5 Communication module C-... for
2 Mobile data tags MDT...H for 13.56 MHz. PROFIBUS or Ethernet.
15
13.56 MHz 4 Round antennas A...R for 125 kHz or 6 Control system
13.56 MHz
16
17
18
19
20
2–4 Bosch Rexroth AG RFID systems 3 842 541 004 (2012-12)

RFID system ID 200

Communication module ID 200/C-...

125 kHz 13,56 MHz IP 65

00133453

The communication module connects

the antennas with the control system.
There are plug-in connections for

42

33
up to two antennas, which can be
simultaneously active and are able
136,6
to work with different frequencies.
92
A digital sensor can optionally be
connected at each antenna connection. 15

Parameterization and diagnosis are 19

performed via the integrated web server.

ID 200/C-PDP
The connection to the control system is
61,4

36
established via PROFIBUS-DPV0. The
integrated web server can be reached
via a separate RS-232 interface.
107
00132000
ID 200/C-ETH
The connection to the control system
is established via Ethernet. Ethernet Operating voltage 20 to 30 VDC, PELV
protocols PROFINET/IO, Modbus/TCP Ripple ≤ 10%
and EtherNet/IP are available in addition Power consumption Max. 1.5 A (incl. 2 antennas)
to TCP/IP. An integrated switch allows Status displays 7 LEDs
cabling in line structure as well as the Connections RS232 ID 200/C-PDP
classical Ethernet star-form cabling. PROFIBUS-DPV0
PROFINET ID 200/C-ETH
Communication module ID 200/C-... Ethernet/IP
No. Modbus/TCP
ID 200/C-PDP 3 842 410 061 TCP/IP
ID 200/C-ETH 3 842 410 060 Protection class IP65
Housing material Aluminum, powder coated RAL 7035
Ambient temperature –25 to +70°C
Storage temperature –30 to +80°C
Humidity Max. 96%
Vibration resistance 3.5 mm (10 to 55 Hz); 20 g (55 to 2000 Hz)
Shock and impact resistance 70 g/6 ms, 18 cycles
Approvals EN 300330, ETS 300683, CE, FCC
Mass 0.5 kg