Manual Transdutor Temperatura

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

Temperature Transducer

Model DL/TE

Digital Indicator (DL/TE/I)


(optional)

Technical Specifications
Assembly Diagram
Temperature Transducer/Indicator
Model DL/TE
Technical Characteristics

Electrical, Environmental and Housing Characteristics


Supply Universal 80 – 265 V
Supply isolation 1500 V (power supply against any other terminal)
Operating temperature -10 to 85 °C
Storage temperature -10 to 85 °C
Operating humidity 10 to 95% without condensation
Electromagnetic compatibility Immune up to 0.5 mT
Electrostatic compatibility Immune
Consumption ≤ 1.5 W
Housing and connection diagram 1 input / 1 output part: see dwg. TR003 rev. 1
1 input / 2 output part: see dwg. DL/TE 45 rev. 4
2 input / 2 output part: see dwg. DL/TE 45 rev. 2
Assembly DIN 35 mm rail
Dimensions (W x H x L) 75 x 22 x 110 mm
Weight 210 g
Wire cross section ≤ 2.5 mm2
Proof tests Impulse voltage, according to NBR 716 and IEC 255.5
Switching surge, according to ANSI C. 3790 a.
Applied voltage/ground, 2000 V, 50/60Hz, 1 min.
Megger 500 Vdc: isolation better than 100 MΩ

Technical Characteristics - Sensor


Sensor type PT-100, 3 wire configuration

Technical Characteristics - Transducer


Precision 0.25% or 0.50% (user specified)
Proportional output Voltage or current (user specified)
Temperature drift 0.1% / 10 °C
Response time ≤ 400 ms (0 to 90% of the output current)
Ripple ≤ 2%
Line resistance 15
Rl ≤ [Ohms]
I out [ Amperes]

Technical Characteristics - Indicator


Display 3 ½ digits, 7 segment LED displays
Indication accuracy 0.5% ± 1 digit
Scale User adjustable up to ± 5%
Available versions

1 input / 1 output transducer

1 input / 2 output transducer

2 input / 2 output transducer

You might also like