Coolant Specifications

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

1/18/24, 1:37 PM SIS 2.

Coolant Specifications (GEG00857-02)

SMCS -
Water used in the cooling system should be clean, and as free as possible from scale forming

PIP
minerals or corrosive chemicals. Softened water should not be used. Treating the water with

-
Caterpillar Coolant Inhibitor will prevent the formation of rust and prevent pitting. It will also retard,

202 1046
and in some cases completely eliminate mineral deposits in the engine.

4
10: 01/1 666
/ 4
The most efficient and satisfactory corrosion protection for the cooling system is accomplished by
maintaining proper level of coolant, inhibitor and antifreeze solution. The use of auxiliary water filters
is not necessary or recommended.
3
GE 7:17+ 8
G
© 2 0085 03:00
During freezing weather add sufficient permanent type antifreeze to the coolant to prevent freezing.

Most commercial antifreeze solutions contain rust inhibitors, however, it is recommended the adding

024 7
of Caterpillar Coolant System Inhibitor to glycol base antifreeze if protection is for temperatures

Cat
above -20°F (-29°C). If protection is for temperatures -20°F (-29°C) or below, do not add inhibitor.

erp
Follow instructions given on the container.

illa
rI
Inhibitor contains alkali. Avoid contact with eyes. Avoid nc.
prolonged or repeated contact with skin.

PIP-10464666
2024/01/18
10:37:11+03:00
GEG008570020
© 2024 Caterpillar Inc.

https://sis2.cat.com/#/print-preview/service/a1b17a21-80f7-41f8-a79e-28627e1ea4b4 1/1

You might also like