SLV - 2016

Download as pdf or txt
Download as pdf or txt
You are on page 1of 152

GRUNDFOS DATA BOOKLET

SL1, SLV pumps


1.1 to 11 kW
50 Hz
SL1, SLV pumps

1. Introduction 3 12. Further product information 149


Table of contents

Introduction 3 WebCAPS 149


Applications 3 WinCAPS 150
Grundfos Blueflux® 4
GO CAPS 151
SMARTdesign 4

2. Performance range 5

3. Identification 6
Type key 6
Nameplate 7

4. Selection of product 8
Ordering a pump 8

5. Product range 9
SL1 pump range, standard DIN 9
SLV pump range, standard DIN 11

6. Variants 15
List of variants 15

7. Construction 17
Drawings, SL1 pumps 17
Drawings, SLV pumps 21
Material specification, SL1 and SLV
standard pumps 25
Material specification, SL1 and SLV Q variants 26

8. Product description 27
Features 27
Operating conditions 29
Motor range 29
Pump controllers 29
Frequency converter operation 29
Explosion-proof pumps 30
Wiring diagrams 31

9. Curve charts and technical data 33


How to read the curve charts 34
Curve conditions 35
Performance tests 35
Certificates 35
Witness test 35

10. Performance curves and technical data 36


SL1.50.65 36
SL1.50.80 42
SL1.80.80 48
SL1.80.100 60
SL1.100.100 72
SL1.100.150 78
SLV.65.65 84
SLV.65.80 90
SLV.80.80 96
SLV.80.100 116
SLV.100.100 136

11. Accessories 144


Installation systems 144
Other accessories 145
Level controllers 146

2
SL1, SLV pumps
1

1. Introduction

Introduction
Introduction Applications
This data booklet deals with Grundfos submersible Typical applications are transfer of liquids, such as:
wastewater and sewage pumps types SL1 and SLV. • domestic wastewater
Two types of pumps are available: • industrial wastewater
• SL1 pumps with S-tube® impeller • municipal wastewater
• SLV pumps with SuperVortex (free-flow) impeller. • wastewater with a high content of fibres
(SuperVortex impeller)
• drainage and surface water
• process and cooling water.
The pumps are ideal for pumping the above liquids
from for instance:
• municipal network pumping stations
• inlet pumping stations in wastewater treatment
plants
• primary clarification in wastewater treatment plants
• secondary clarification in wastewater treatment
plants
• stormwater pumping stations
• public buildings
• residential buildings
SL1 • factories/industry.

SLV

Fig. 1 SL1 (S-tube®) and SLV (SuperVortex) pumps

The S-tube® impeller is the only


impeller available in the wastewater
market that does not compromise
either efficiency or free passage
through the pump.

The pumps are SuperVortex or S-tube® impeller


pumps specifically designed for pumping sewage and
wastewater in a wide range of private, municipal and
industrial applications.
The pumps are made of resistant materials, such as
cast iron and stainless steel. These materials ensure
long and reliable operation.
The pumps are fitted with motors from 1.1 kW up to
and including 11 kW. The motors are either 2- or 4-pole
motors, depending on the motor size.
The free passage in the pumps is 50 to 100 mm.
The pumps are available for:
• submerged installation on auto-coupling system
• submerged installation, free-standing.

3
SL1, SLV pumps
1
Grundfos Blueflux® SMARTdesign
Introduction

Grundfos Blueflux® guarantees the


highest motor efficiency from
Grundfos. Every aspect of the
technology driving a Grundfos
Blueflux® motor has been developed
to meet the actual needs of the
application for which the pump system
or solution is installed - and always
with an emphasis on reliability and
efficiency.

A pump system or solution with a Grundfos Blueflux® The smartdesign features of our SL1 and SLV pumps
motor has a considerably higher total efficiency than include:
comparable solutions and reduces life cycle costs
• moisture-proof cable plug connection made of
substantially. The combination of motor technology,
corrosion-resistant stainless steel with conductors
advanced pump design and speed control ensures
embedded in polyurethane sealant
superior system control, reduced day-to-day service
costs and lower environmental impact. • stainless steel clamp connection between motor
housing and pump housing for easy service
Grundfos Blueflux® represents a range of skills and
innovative processes that Grundfos brings to motor • power cable incorporating wires for thermal sensors
technology development. Grundfos was instrumental in in the motor windings
the drafting and passing of the EuP Directive, setting • no extra cable required for sensors in pumps with
the ecodesign requirements for electric motors in the sensors
European Union. • monitoring of operating conditions for pumps with
As a technological leader within high-efficiency motors, sensors
Grundfos was invited to help with the technical aspects • moisture detector for continuous monitoring of
of the legislation. Grundfos was able to create political motor enclosure and automatic cut-out in case of
awareness of the huge savings potential of variable leakage
speed motors and, at a later stage, influence the • heavy-duty bearings greased for life
decision-makers to include variable-frequency drives • built for frequency-converter operation
in the new legislation. As a consequence, Europe's
• smooth pump surface prevents dirt and impurities
annual electricity consumption will be reduced by 5 %
from sticking to the pump
by 2020 - about ten times more than originally planned
before Grundfos intervened. • self-cleaning S-tube® impeller with a long vane
reducing the risk of jamming or clogging, or
The Grundfos Blueflux® label guarantees that the
Super-Vortex impeller with high pumping efficiency
motor technology used is ahead of current market
and less downtime
standards and either meets or exceeds legislative
requirements for motor efficiency, where these applied. • explosion-proof motors for potentially explosive
environments (ATEX-approved pumps)
• motor in insulation class H (180 °C), enclosure class
IP68 with one thermal sensor in each phase
• temperature rise class A
• service-friendly design:
• clamp connection between motor and pump housing
• double mechanical cartridge shaft seal
• cable connection to motor via plug.
• motor built of highly efficient components, offering
lower motor temperature and longer life.

4
SL1, SLV pumps
2

2. Performance range

Performance range
Figure 2 shows the performance range of SL1 and SLV
sewage and wastewater pumps. It gives an overview
of the various sizes and impeller types.
Note: For information about the performance range of
each individual pump, see pages 36 to 143. If your
require a duty point outside the grey performance
range below, please see the Grundfos SE, SL and S
range data booklets available in WebCAPS.

H
[m]
50 Hz
80

60

50

40

30

20
SL 9 - 30 kW

SL 1.1 - 11 kW
12

10
SL 0.9 - 1.5 kW
8

TM05 4164 1314


2 3 4 5 7 10 15 20 30 40 50 70 100 150 200 300
Q [l/s]

20 40 60 80 100 200 400 600 Q [m³/h]


Fig. 2 Performance range

5
SL1, SLV pumps
3

3. Identification
Identification

Type key
The pump can be identified by means of the type
designation. The type designation is stated on the
nameplate of the pump. The example below shows the
following:
• SLV pump with 80 mm free spherical passage and
80 mm DIN outlet
• motor with 4 kW shaft power, sensor version,
ATEX-approved version, 4-pole, for 3 x 380-415 V
50 Hz, and star-delta starting
• Q variant, i.e. cast iron pump fitted with a cast
stainless steel SuperVortex impeller.

Code Example SL V .80 .80 .40 .A .Ex .4 .5 .OD .Q

Pump type:
SL Grundfos wastewater pump

Impeller type:
1 S-tube® impeller
V SuperVortex (free-flow) impeller

Free spherical passage:


50 50 mm
65 65 mm
80 80 mm
100 100 mm

Pump discharge:
65 DN 65
80 DN 80
100 DN 100
150 DN 150

Motor power, P2 (motor output power P2/10 [kW]):


40 4 kW

Sensor version:
Blank Standard
A Sensor version

Pump version:
Blank Non-explosion-proof pump (standard)
Ex Explosion-proof pump

Number of poles:
2 2-pole
4 4-pole

Frequency:
50 50 Hz

Voltage and starting method:


0B 3 x 400-415 V, direct-on-line starting
0D 3 x 380-415 V, direct-on-line starting
1D 3 x 380-415 V, star-delta starting
0E 3 x 220-240 V, direct-on-line starting
1E 3 x 220-240 V, star-delta starting

Generation:
Blank 1st generation
A 2nd generation
B 3rd generation
C 4rd generation

Pump materials:
Blank Complete pump in cast iron
Q Cast iron pump with stainless steel impeller

Customisation
Blank Pump in standard range
Z Custom-built pump

Note: The pump types are not available in all variants.

6
SL1, SLV pumps
3
Nameplate

Identification
1

98085993
2 Type:
3 Model: 19
4 P.c. IP68 m 6
3
5 Hmax: m Qmax: m /h 17
7 Motor: Tmax.: C 16
10 P1: kW P2: kW 24
20 n: min -1 Cos : 11
8 V A 22
V A 23

TM04 3279 4108


9 Hz Insul.class: H 25
21 Weight: kg 27
14 Made in Tatabanya. Hungary 13

Fig. 3 Nameplate

Pos. Description
1 Ex mark
2 Type designation
3 Product/model number
4 Production code
5 Maximum head
6 Maximum installation depth
7 Number of phases
8 Rated voltage, delta connection
9 Rated voltage, star connection
10 Rated input power
11 Power factor
12 Starting capacitor
13 Country of production
14 CE mark
15 EN approval
16 Maximum liquid temperature
17 Maximum flow rate
18 Explosion protection
19 Enclosure class according to IEC
20 Rated speed
21 Frequency
22 Rated current, delta connection
23 Rated current, star connection
24 Shaft power
25 Insulation class
26 Run capacitor
27 Weight without cable

7
SL1, SLV pumps
4

4. Selection of product
Selection of product

Ordering a pump Custom-built variants


When ordering a pump, you need to take the following The pumps can be customised to meet individual
five aspects into consideration: requirements. Many pump features and options are
available for customisation, such as explosion-proof
1. pump type
versions, various cable lengths or special materials.
2. custom-built variation (option)
Variants can be seen in Variants on page 15.
3. explosion-proof version
For requirements or designs not included in the list,
4. accessories please contact Grundfos.
5. pump controller.
Explosion-proof version
Pump type
The entire range is available in explosion-proof
Use the table below to identify the pump type that best versions.
fulfils your needs. The table is for guidance only. The pumps are provided with a II 2 G Ex c d IIB T4 Gb,
Description SL1 SLV T3 Gb classification and for the sensor version a II 2G
c d mb IIB T4 Gb, T3 Gb classification according to
Liquid and operation characteristics
EN 60079-1:2007, EN 13463-5:2011 and
Dry solids content up to 3 % X X
EN 60079-18:2009.
Dry solids content up to 5 % X
Relatively low content of fibres and solids X X For further information about explosion-proof pumps,
Relatively high content of fibres and solids X please see page 30.
Relatively low number of operating hours X X
Relatively high number of operating hours X Accessories
Application Depending on the installation type, you may need to
Stormwater X X order accessories. See Accessories on page 144 for
Groundwater X X selection of the correct accessories.
Drainage and surface water X X
Note: Ordered accessories are not factory-fitted.
Drainage and surface water with small impurities X X
Abrasive surface water X X
Wastewater with long fibres, e.g. from laundries X X Pump controller
Domestic wastewater with discharge from toilets X X The following controllers are available:
Municipal sewage X X
• LC/LCD 107 with air bells
Sewage from commercial buildings X X
Industrial process water with solids and fibres X • LC/LCD 108 with float switches
Industrial process water with solids X X • LC/LCD 110 with level electrodes
Industrial process water without solids and fibres X • Grundfos Dedicated Controls.
When you have selected the pump type, use the
sections Product range on page 9 and Type key on
page 6 to identify the pump that best fulfils your needs.
The list below is a detailed description of the product
you get if you order the following pump:
Pump Product no.
SLV.65.65.22.2.51D.C 98626044
TM0 45778 3909

• pump as specified in the type key


• 10 m cable
• paint: NCS 9000N black (RAL 9005), gloss code 30,
thickness 100 m
• thermal switch in stator windings or three thermal Fig. 4 Grundfos Dedicated Controls
sensors (PTC)
• one moisture switch in the motor chamber Grundfos Dedicated Controls is a control system
designed for installation in either commercial buildings
• tested according to ISO 9906:2012 grade 3B.
or network pumping stations with one to six pumps.
See Performance curves and technical data for
As standard, the system comes with
selection of a standard pump.
application-optimised software and can be configured
Note: Product-specific data for the pump can also be to meet your specific pumping needs.
seen in WebCAPS using the product number
For further information about Grundfos Dedicated
98626044.
Controls, see page 146.

8
SL1, SLV pumps
5

5. Product range

Product range
SL1 pump range, standard DIN
Voltage
Explosion Stainless steel
Pump type Sensor Poles Hz 3 x 400-415 V 3 x 380-415 V 3 x 220-240 V 3 x 380-415 V 3 x 220-240 V
proof impeller
DOL DOL DOL Y/D Y/D

[.A] [.EX] [.2] [.5] [0B] [OD] [0E] [1D] [1E] [.Q]
Yes 2 50 98626553 98626482 98626476 98626487 No
Yes
No 2 50 98626308 98626303 98626297 98626314 No
SL1.50.65.22
Yes 2 50 98626759 98626698 98626692 98626703 No
No
No 2 50 98626078 98624257 98626069 98626085 No
Yes 2 50 98626554 98626483 98626477 98626488 No
Yes
No 2 50 98626309 98626304 98626298 98626315 No
SL1.50.65.30
Yes 2 50 98626760 98626699 98626693 98626704 No
No
No 2 50 98626079 98624258 98626070 98626086 No
Yes 2 50 98626551 98626485 98626489 98626478 No
Yes
No 2 50 98626305 98626310 98626316 98626299 No
SL1.50.65.40
Yes 2 50 98626757 98626701 98626705 98626694 No
No
No 2 50 98626075 98626080 98624259 98626071 No
Yes 2 50 98626555 98617691 98626479 98626490 No
Yes
No 2 50 98626311 98617680 98626300 98626317 No
SL1.50.80.22
Yes 2 50 98626761 98617679 98626695 98626706 No
No
No 2 50 98626082 98617678 98626072 98626087 No
Yes 2 50 98626556 98626484 98626480 98626491 No
Yes
No 2 50 98626312 98626306 98626301 98626318 No
SL1.50.80.30
Yes 2 50 98626762 98626700 98626696 98626707 No
No
No 2 50 98626083 98626076 98626073 98626088 No
Yes 2 50 98626552 98626486 98626492 98626481 No
Yes
No 2 50 98626307 98626313 98626319 98626302 No
SL1.50.80.40
Yes 2 50 98626758 98626702 98626708 98626697 No
No
No 2 50 98626077 98626084 98624260 98626074 No
Yes 4 50 98626538 98626399 98626370 No
Yes
No 4 50 98626238 98626189 98626141 No
SL1.80.80.15
Yes 4 50 98626744 98626615 98626586 No
No
No 4 50 98626020 98624693 98625875 No
Yes 4 50 98626542 98626403 98626374 98626467 No
Yes
No 4 50 98626242 98624696 98626145 98626283 No
SL1.80.80.22
Yes 4 50 98626748 98626619 98626590 98626683 No
No
No 4 50 98626024 98624251 98625879 98626057 No
Yes 4 50 98626531 98626392 98626356 98626457 No
Yes
No 4 50 98626222 98626175 98626127 98626273 No
SL1.80.80.30
Yes 4 50 98626737 98626608 98626572 98626673 No
No
No 4 50 98626006 98624669 98625861 98626049 No
Yes 4 50 98626515 98626424 98626460 98626359 No
Yes
No 4 50 98626178 98626225 98626276 98626130 No
SL1.80.80.40
Yes 4 50 98626721 98626640 98626676 98626575 No
No
No 4 50 98625968 98626009 98626052 98625864 No
Yes 4 50 98626546 98626407 98626431 98626378 No
Yes
No 4 50 98626287 98626196 98626246 98626149 No
SL1.80.80.55
Yes 4 50 98626752 98626623 98626647 98626594 No
No
No 4 50 98626061 98625980 98624697 98625893 No
Yes 4 50 98626522 98626436 98626471 98626383 No
Yes
No 4 50 98626201 98626252 98626292 98626154 No
SL1.80.80.75
Yes 4 50 98626728 98626652 98626687 98626599 No
No
No 4 50 98625985 98626032 98624703 98625898 No
Yes 4 50 98626539 98626400 98626371 No
Yes
No 4 50 98626239 98626190 98626142 No
SL1.80.100.15
Yes 4 50 98626745 98626616 98626587 No
No
No 4 50 98626021 98625977 98625876 No
Yes 4 50 98626543 98626404 98626375 98626468 No
Yes
No 4 50 98626243 98626193 98626146 98626284 No
SL1.80.100.22
Yes 4 50 98626749 98626620 98626591 98626684 No
No
No 4 50 98626025 98624695 98625880 98626058 No
Yes 4 50 98626532 98626393 98626357 98626458 No
Yes
No 4 50 98626223 98626176 98626128 98626274 No
SL1.80.100.30
Yes 4 50 98626738 98626609 98626573 98626674 No
No
No 4 50 98626007 98625966 98625862 98626050 No

9
SL1, SLV pumps
5
Product range

Voltage
Explosion Stainless steel
Pump type Sensor Poles Hz 3 x 400-415 V 3 x 380-415 V 3 x 220-240 V 3 x 380-415 V 3 x 220-240 V
proof impeller
DOL DOL DOL Y/D Y/D

[.A] [.EX] [.2] [.5] [0B] [OD] [0E] [1D] [1E] [.Q]
Yes 4 50 98626516 98626425 98626461 98626360 No
Yes
No 4 50 98626179 98626226 98626277 98626131 No
SL1.80.100.40
Yes 4 50 98626722 98626641 98626677 98626576 No
No
No 4 50 98625969 98626010 98626053 98625865 No
Yes 4 50 98626547 98626408 98626432 98626379 No
Yes
No 4 50 98626288 98626197 98626247 98626150 No
SL1.80.100.55
Yes 4 50 98626753 98626624 98626648 98626595 No
No
No 4 50 98626062 98625981 98626028 98625894 No
Yes 4 50 98626523 98626437 98626472 98626384 No
Yes
No 4 50 98626202 98626253 98626293 98626155 No
SL1.80.100.75
Yes 4 50 98626729 98626653 98626688 98626600 No
No
No 4 50 98625986 98626033 98626066 98625899 No
Yes 4 50 98626517 98626426 98626462 98626361 No
Yes
No 4 50 98626180 98626227 98626278 98626132 No
SL1.100.100.40
Yes 4 50 98626723 98626642 98626678 98626577 No
No
No 4 50 98625970 98626011 98624701 98625866 No
Yes 4 50 98626548 98626409 98626433 98626380 No
Yes
No 4 50 98626289 98626198 98626248 98626151 No
SL1.100.100.55
Yes 4 50 98626754 98626625 98626649 98626596 No
No
No 4 50 98626063 98625982 98626029 98625895 No
Yes 4 50 98626524 98626438 98626473 98626385 No
Yes
No 4 50 98626203 98626254 98626294 98626156 No
SL1.100.100.75
Yes 4 50 98626730 98626654 98626689 98626601 No
No
No 4 50 98625987 98626034 98626067 98625900 No
Yes 4 50 98626518 98626427 98626463 98626362 No
Yes
No 4 50 98626181 98626228 98626279 98626133 No
SL1.100.150.40
Yes 4 50 98626724 98626643 98626679 98626578 No
No
No 4 50 98625971 98626012 98626054 98625867 No
Yes 4 50 98626549 98626410 98626434 98626381 No
Yes
No 4 50 98626290 98626199 98626250 98626152 No
SL1.100.150.55
Yes 4 50 98626755 98626626 98626650 98626597 No
No
No 4 50 98626064 98625983 98626030 98625896 No
Yes 4 50 98626525 98626439 98626474 98626386 No
Yes
No 4 50 98626204 98626255 98626295 98626157 No
SL1.100.150.75
Yes 4 50 98626731 98626655 98626690 98626602 No
No
No 4 50 98625988 98626035 98626068 98625901 No

10
SL1, SLV pumps
5
SLV pump range, standard DIN

Product range
Voltage
Explosion Stainless
Pump type Sensor Poles Hz 3 x 400-415 V 3 x 380-415 V 3 x 220-240 V 3 x 380-415 V 3 x 220-240 V
proof steel impeller
DOL DOL DOL Y/D Y/D

[.A] [.EX] [.2] [.5] [0B] [OD] [0E] [1D] [1E] [.Q]
98627207 98627137 98627115 98627176 Yes
Yes 2 50
98626529 98626390 98626340 98626451 No
Yes
98626947 98626917 98626887 98626977 Yes
No 2 50
98626216 98626169 98626121 98626267 No
SLV.65.65.22
98627093 98627023 98627001 98627062 Yes
Yes 2 50
98626735 98626606 98626566 98626667 No
No
98626833 98626803 98626773 98626863 Yes
No 2 50
98626000 98624199 98625855 98626044 No
98627205 98627135 98627105 98627166 Yes
Yes 2 50
98626527 98626388 98626320 98626441 No
Yes
98626937 98626907 98626877 98626967 Yes
No 2 50
98626206 98626159 98626111 98626257 No
SLV.65.65.30
98627091 98627021 98626991 98627052 Yes
Yes 2 50
98626733 98626604 98626506 98626657 No
No
98626823 98626793 98626763 98626853 Yes
No 2 50
98625990 98624165 98625845 98626037 No
98627189 98627149 98627168 98627107 Yes
Yes 2 50
98626493 98626412 98626443 98626332 No
Yes
98626909 98626939 98626969 98626879 Yes
No 2 50
98626161 98626208 98626259 98626113 No
SLV.65.65.40
98627075 98627035 98627054 98626993 Yes
Yes 2 50
98626709 98626628 98626659 98626508 No
No
98626795 98626825 98626855 98626765 Yes
No 2 50
98625943 98625992 98624254 98625847 No
98627208 98627138 98627116 98627177 Yes
Yes 2 50
98626530 98626391 98626351 98626452 No
Yes
98626948 98626918 98626888 98626978 Yes
No 2 50
98626217 98626170 98626122 98626268 No
SLV.65.80.22
98627094 98627024 98627002 98627063 Yes
Yes 2 50
98626736 98626607 98626567 98626668 No
No
98626834 98626804 98626774 98626864 Yes
No 2 50
98626001 98625961 98625856 98626045 No
98627206 98627136 98627106 98627167 Yes
Yes 2 50
98626528 98626389 98626331 98626442 No
Yes
98626938 98626908 98626878 98626968 Yes
No 2 50
98626207 98626160 98626112 98626258 No
SLV.65.80.30
98627092 98627022 98626992 98627053 Yes
Yes 2 50
98626734 98626605 98626507 98626658 No
No
98626824 98626794 98626764 98626854 Yes
No 2 50
98625991 98625942 98625846 98626038 No
98627190 98627150 98627169 98627108 Yes
Yes 2 50
98626494 98626413 98626444 98626333 No
Yes
98626910 98626940 98626970 98626880 Yes
No 2 50
98626162 98626209 98626260 98626114 No
SLV.65.80.40
98627076 98627036 98627055 98626994 Yes
Yes 2 50
98626710 98626629 98626660 98626509 No
No
98626796 98626826 98626856 98626766 Yes
No 2 50
98625944 98625993 98624699 98625848 No
98627210 98627140 98627125 Yes
Yes 4 50
98626534 98626395 98626366 No
Yes
98626957 98626927 98626897 Yes
No 4 50
98626233 98626185 98626137 No
SLV.80.80.11
98627096 98627026 98627011 Yes
Yes 4 50
98626740 98626611 98626582 No
No
98626843 98626813 98626783 Yes
No 4 50
98626016 98625975 98625871 No
98627212 98627142 98627127 Yes
Yes 4 50
98626536 98626397 98626368 No
Yes
98626959 98626929 98626899 Yes
No 4 50
98626236 98626187 98626139 No
SLV.80.80.13
98627098 98627028 98627013 Yes
Yes 4 50
98626742 98626613 98626584 No
No
98626845 98626815 98626785 Yes
No 4 50
98626018 98624692 98625873 No

11
SL1, SLV pumps
5
Product range

Voltage
Explosion Stainless
Pump type Sensor Poles Hz 3 x 400-415 V 3 x 380-415 V 3 x 220-240 V 3 x 380-415 V 3 x 220-240 V
proof steel impeller
DOL DOL DOL Y/D Y/D

[.A] [.EX] [.2] [.5] [0B] [OD] [0E] [1D] [1E] [.Q]
98627214 98627144 98627129 Yes
Yes 4 50
98626540 98626401 98626372 No
Yes
98626961 98626931 98626901 Yes
No 4 50
98626240 98626191 98626143 No
SLV.80.80.15
98627100 98627030 98627015 Yes
Yes 4 50
98626746 98626617 98626588 No
No
98626847 98626817 98626787 Yes
No 4 50
98626022 98624694 98625877 No
98627216 98627146 98627131 98627186 Yes
Yes 4 50
98626544 98626405 98626376 98626469 No
Yes
98626963 98626933 98626903 98626987 Yes
No 4 50
98626244 98626194 98626147 98626285 No
SLV.80.80.22
98627102 98627032 98627017 98627072 Yes
Yes 4 50
98626750 98626621 98626592 98626685 No
No
98626849 98626819 98626789 98626873 Yes
No 4 50
98626026 98624252 98625891 98626059 No
98627191 98627151 98627170 98627109 Yes
2 50
98626495 98626414 98626445 98626334 No
Yes
98627201 98627161 98627183 98627122 Yes
4 50
98626519 98626428 98626464 98626363 No
Yes
98626911 98626941 98626971 98626881 Yes
2 50
98626163 98626210 98626261 98626115 No
No
98626924 98626954 98626984 98626894 Yes
4 50
98626182 98626230 98626280 98626134 No
SLV.80.80.40
98627077 98627037 98627056 98626995 Yes
2 50
98626711 98626630 98626661 98626510 No
Yes
98627087 98627047 98627069 98627008 Yes
4 50
98626725 98626644 98626680 98626579 No
No
98626797 98626827 98626857 98626767 Yes
2 50
98625945 98625994 98626039 98625849 No
No
98626810 98626840 98626870 98626780 Yes
4 50
98625972 98626013 98624702 98625868 No
98627193 98627153 98627172 98627111 Yes
Yes 2 50
98626497 98626416 98626447 98626336 No
Yes
98626913 98626943 98626973 98626883 Yes
No 2 50
98626165 98626212 98626263 98626117 No
SLV.80.80.60
98627079 98627039 98627058 98626997 Yes
Yes 2 50
98626713 98626632 98626663 98626562 No
No
98626799 98626829 98626859 98626769 Yes
No 2 50
98625947 98625996 98626041 98625851 No
98627197 98627157 98627178 98627117 Yes
Yes 2 50
98626511 98626420 98626453 98626352 No
Yes
98626919 98626949 98626979 98626889 Yes
No 2 50
98626171 98626218 98626269 98626123 No
SLV.80.80.75
98627083 98627043 98627064 98627003 Yes
Yes 2 50
98626717 98626636 98626669 98626568 No
No
98626805 98626835 98626865 98626775 Yes
No 2 50
98625962 98626002 98624255 98625857 No
98627199 98627159 98627180 98627119 Yes
Yes 2 50
98626513 98626422 98626455 98626354 No
Yes
98626921 98626951 98626981 98626891 Yes
No 2 50
98626173 98626220 98626271 98626125 No
SLV.80.80.92
98627085 98627045 98627066 98627005 Yes
Yes 2 50
98626719 98626638 98626671 98626570 No
No
98626807 98626837 98626867 98626777 Yes
No 2 50
98625964 98626004 98626047 98625859 No
98627195 98627155 98627174 98627113 Yes
Yes 2 50
98626499 98626418 98626449 98626338 No
Yes
98626915 98626945 98626975 98626885 Yes
No 2 50
98626167 98626214 98626265 98626119 No
SLV.80.80.110
98627081 98627041 98627060 98626999 Yes
Yes 2 50
98626715 98626634 98626665 98626564 No
No
98626801 98626831 98626861 98626771 Yes
No 2 50
98625949 98625998 98624700 98625853 No

12
SL1, SLV pumps
5

Product range
Voltage
Explosion Stainless
Pump type Sensor Poles Hz 3 x 400-415 V 3 x 380-415 V 3 x 220-240 V 3 x 380-415 V 3 x 220-240 V
proof steel impeller
DOL DOL DOL Y/D Y/D

[.A] [.EX] [.2] [.5] [0B] [OD] [0E] [1D] [1E] [.Q]
98627211 98627141 98627126 Yes
Yes 4 50
98626535 98626396 98626367 No
Yes
98626958 98626928 98626898 Yes
No 4 50
98626235 98626186 98626138 No
SLV.80.100.11
98627097 98627027 98627012 Yes
Yes 4 50
98626741 98626612 98626583 No
No
98626844 98626814 98626784 Yes
No 4 50
98626017 98624691 98625872 No
98627213 98627143 98627128 Yes
Yes 4 50
98626537 98626398 98626369 No
Yes
98626960 98626930 98626900 Yes
No 4 50
98626237 98626188 98626140 No
SLV.80.100.13
98627099 98627029 98627014 Yes
Yes 4 50
98626743 98626614 98626585 No
No
98626846 98626816 98626786 Yes
No 4 50
98626019 98625976 98625874 No
98627215 98627145 98627130 Yes
Yes 4 50
98626541 98626402 98626373 No
Yes
98626962 98626932 98626902 Yes
No 4 50
98626241 98626192 98626144 No
SLV.80.100.15
98627101 98627031 98627016 Yes
Yes 4 50
98626747 98626618 98626589 No
No
98626848 98626818 98626788 Yes
No 4 50
98626023 98625978 98625878 No
98627217 98627147 98627132 98627187 Yes
Yes 4 50
98626545 98626406 98626377 98626470 No
Yes
98626964 98626934 98626904 98626988 Yes
No 4 50
98626245 98626195 98626148 98626286 No
SLV.80.100.22
98627103 98627033 98627018 98627073 Yes
Yes 4 50
98626751 98626622 98626593 98626686 No
No
98626850 98626820 98626790 98626874 Yes
No 4 50
98626027 98625979 98625892 98626060 No
98627192 98627152 98627171 98627110 Yes
2 50
98626496 98626415 98626446 98626335 No
Yes
98627202 98627162 98627184 98627123 Yes
4 50
98626520 98626429 98626465 98626364 No
Yes
98626912 98626942 98626972 98626882 Yes
2 50
98626164 98626211 98626262 98626116 No
No
98626925 98626955 98626985 98626895 Yes
4 50
98626183 98626231 98626281 98626135 No
SLV.80.100.40
98627078 98627038 98627057 98626996 Yes
2 50
98626712 98626631 98626662 98626561 No
Yes
98627088 98627048 98627070 98627009 Yes
4 50
98626726 98626645 98626681 98626580 No
No
98626798 98626828 98626858 98626768 Yes
2 50
98625946 98625995 98626040 98625850 No
No
98626811 98626841 98626871 98626781 Yes
4 50
98625973 98626014 98626055 98625869 No
98627194 98627154 98627173 98627112 Yes
Yes 2 50
98626498 98626417 98626448 98626337 No
Yes
98626914 98626944 98626974 98626884 Yes
No 2 50
98626166 98626213 98626264 98626118 No
SLV.80.100.60
98627080 98627040 98627059 98626998 Yes
Yes 2 50
98626714 98626633 98626664 98626563 No
No
98626800 98626830 98626860 98626770 Yes
No 2 50
98625948 98625997 98626042 98625852 No
98627198 98627158 98627179 98627118 Yes
Yes 2 50
98626512 98626421 98626454 98626353 No
Yes
98626920 98626950 98626980 98626890 Yes
No 2 50
98626172 98626219 98626270 98626124 No
SLV.80.100.75
98627084 98627044 98627065 98627004 Yes
Yes 2 50
98626718 98626637 98626670 98626569 No
No
98626806 98626836 98626866 98626776 Yes
No 2 50
98625963 98626003 98626046 98625858 No

13
SL1, SLV pumps
5
Product range

Voltage
Explosion Stainless
Pump type Sensor Poles Hz 3 x 400-415 V 3 x 380-415 V 3 x 220-240 V 3 x 380-415 V 3 x 220-240 V
proof steel impeller
DOL DOL DOL Y/D Y/D

[.A] [.EX] [.2] [.5] [0B] [OD] [0E] [1D] [1E] [.Q]
98627200 98627160 98627181 98627120 Yes
Yes 2 50
98626514 98626423 98626456 98626355 No
Yes
98626922 98626952 98626982 98626892 Yes
No 2 50
98626174 98626221 98626272 98626126 No
SLV.80.100.92
98627086 98627046 98627067 98627006 Yes
Yes 2 50
98626720 98626639 98626672 98626571 No
No
98626808 98626838 98626868 98626778 Yes
No 2 50
98625965 98626005 98626048 98625860 No
98627196 98627156 98627175 98627114 Yes
Yes 2 50
98626500 98626419 98626450 98626339 No
Yes
98626916 98626946 98626976 98626886 Yes
No 2 50
98626168 98626215 98626266 98626120 No
SLV.80.100.110
98627082 98627042 98627061 98627000 Yes
Yes 2 50
98626716 98626635 98626666 98626565 No
No
98626802 98626832 98626862 98626772 Yes
No 2 50
98625950 98625999 98626043 98625854 No
98627209 98627139 98627121 98627182 Yes
Yes 4 50
98626533 98626394 98626358 98626459 No
Yes
98626953 98626923 98626893 98626983 Yes
No 4 50
98626224 98626177 98626129 98626275 No
SLV.100.100.30
98627095 98627025 98627007 98627068 Yes
Yes 4 50
98626739 98626610 98626574 98626675 No
No
98626839 98626809 98626779 98626869 Yes
No 4 50
98626008 98625967 98625863 98626051 No
98627203 98627163 98627185 98627124 Yes
Yes 4 50
98626521 98626430 98626466 98626365 No
Yes
98626926 98626956 98626986 98626896 Yes
No 4 50
98626184 98626232 98626282 98626136 No
SLV.100.100.40
98627089 98627049 98627071 98627010 Yes
Yes 4 50
98626727 98626646 98626682 98626581 No
No
98626812 98626842 98626872 98626782 Yes
No 4 50
98625974 98626015 98626056 98625870 No
98627218 98627148 98627164 98627133 Yes
Yes 4 50
98626550 98626411 98626435 98626382 No
Yes
98626989 98626935 98626965 98626905 Yes
No 4 50
98626291 98626200 98626251 98626153 No
SLV.100.100.55
98627104 98627034 98627050 98627019 Yes
Yes 4 50
98626756 98626627 98626651 98626598 No
No
98626875 98626821 98626851 98626791 Yes
No 4 50
98626065 98625984 98626031 98625897 No
98627204 98627165 98627188 98627134 Yes
Yes 4 50
98626526 98626440 98626475 98626387 No
Yes
98626936 98626966 98626990 98626906 Yes
No 4 50
98626205 98626256 98626296 98626158 No
SLV.100.100.75
98627090 98627051 98627074 98627020 Yes
Yes 4 50
98626732 98626656 98626691 98626603 No
No
98626822 98626852 98626876 98626792 Yes
No 4 50
98625989 98626036 98624704 98625902 No

14
SL1, SLV pumps
6

6. Variants

Variants
List of variants
Motor
15 m
Various cable lengths 25 m
50 m
10 m
15 m
EMC power cables Screened power cables for variable-speed drives
25 m
50 m

Tests

Note: All requests regarding tests must be specified when ordering the pump.
Test at specified duty on standard impeller curve
Trimmed impeller for specified duty test*
Additional test of entire QH curve (incl. report) 5-10 duty points from pump performance curve
ISO 9906:2012 grade 1B tolerances
Different test standard Efficiency guaranteed by Grundfos
ISO 9906:2012 grade 2B tolerances
Test according to customer-specified duty point on ISO 9906:2012 grades 1 and 2
Customer-requested duty point
standard pump curve. Contact Grundfos. tolerances
Vibration test (including report) According to Grundfos factory quality standard
String test Contact Grundfos
Witness test Contact Grundfos

Certificates
ATEX-approved pump report Special Grundfos report. Contact Grundfos
According to ISO 9906:2012 grades 1,
Certificate of compliance with order According to EN10204 2.1
2 and 3B
According to ISO 9906:2012 grades 1,
Pump certificate According to EN10204 2.2
2 and 3B
According to ISO 9906:2012 grades 1,
Inspection certificate According to EN10204 3.1
2 and 3B
Material specification report According to EN10204 3.1B
Material report with certificate According to EN10204 3.2 Material supplier information
Inspection certificate, Lloyd's Register According to EN10204 3.2
Inspection certificate, DNV (Det Norske Veritas) According to EN10204 3.2
Inspection certificate, Germanisher Lloyd According to EN10204 3.2
Inspection certificate, American Bureau of Shipping According to EN10204 3.2
Inspection certificate, Bureau Veritas According to EN10204 3.2
Registro Italiano Navale Agenture According to EN10204 3.2
Other third-party test certificates Contact Grundfos

15
SL1, SLV pumps
6
Variants

Miscellaneous
Solution Customer benefits
• Resistant to acids
• Resistant to mineral oils and vegetable oils
FKM sealing (optional) Contact Grundfos
• Resistant to most solvents (toluene, petrol,
trichloroethylene etc.)
• Resistant to acids
Cable protection hose • Resistant to most oils Contact Grundfos
• Resistant to most solvents etc.
• Wear and seal ring kit for the handling of abrasive
media
Heavy-duty wear ring kit • Increased wear resistance of impeller in abrasive Contact Grundfos
applications
• Increased reliability and life of pump
Stainless steel SuperVortex impeller according to
Increased wear resistance Contact Grundfos
EN 1.4517
• Reduced wear rate of cast iron parts
Ceramic coating of impeller and pump housing • Increased corrosion resistance Contact Grundfos
• Beneficial in case of low number of operating hours
Extra epoxy coating 300 μm Contact Grundfos
Top coating (black RAL9005, red RAL3000 and other colours) Contact Grundfos
Special packaging Contact Grundfos
Special nameplate Contact Grundfos
Other variants Contact Grundfos

* SLV impellers can be trimmed on request.

16
SL1, SLV pumps
7

7. Construction

Construction
Drawings, SL1 pumps

TM06 1071 1514


Fig. 5 Sectional drawing of SL1 pump, standard version

17
SL1, SLV pumps
7
Construction

TM06 0886 1014


Fig. 6 Exploded view of SL1 pump, standard version

18
SL1, SLV pumps
7

Construction
TM04 2788 1009
Fig. 7 Sectional drawing of SL1 pump, sensor version

19
SL1, SLV pumps
7
Construction

TM06 0573 0914


Fig. 8 Exploded view of SL1 pump, sensor version

20
SL1, SLV pumps
7
Drawings, SLV pumps

Construction
520

TM06 1072 1514


Fig. 9 Sectional view of SLV pump, standard version

21
SL1, SLV pumps
7
Construction

TM06 0884 1114


Fig. 10 Exploded view of SLV pump, standard version

22
SL1, SLV pumps
7

Construction
TM04 2786 2908
Fig. 11 Sectional drawing of SLV pump, sensor version

23
SL1, SLV pumps
7
Construction

TM06 0885 1114


Fig. 12 Exploded view of SLV pump, sensor version

24
SL1, SLV pumps
7
Material specification, SL1 and SLV standard pumps

Construction
DIN W.-No./
Pos. Component Material
EN standard
6a Tubular pin, D8 x 22 A2 Stainless steel 1.4301
7a Blank rivet, 2.4 x 6 A2 Stainless steel 1.4301
37 O-ring NBR rubber
37a O-ring NBR rubber
46 Seal ring, inlet NBR rubber/stainless steel 1.4301
48 Stator package
SuperVortex impeller Cast iron, EN-GJL-250 5.1301
49
S-tube® impeller Cast iron, EN-GJL-250 5.1301
49c Wear ring, impeller Stainless steel 1.4301
50 Pump housing Cast iron, EN-GJL-250 5.1301
55 Stator housing Cast iron, EN-GJL-250 5.1301
58 Cover for oil chamber Cast iron, EN-GJL-250 5.1301
59 Bearing cover Cast iron, EN-GJL-250 5.1301
76 Nameplate Stainless steel 1.4401
92 Clamp Stainless steel 1.4401
102 Circlip
Shaft seal complete
Stainless steel, SiC/SiC
(rotating part of MG1/25-G60 Q1Q1PGG, stationary part of
105
MG1/25-G60 Q1Q1PGG; rotating part of BT-AR/25 BXPFF,
Carbon/ceramic
stationary part of BT-AR/25 BXPFF)
106 O-ring for shaft seal NBR rubber
107 O-ring (cover for oil chamber) NBR rubber
109 O-ring for bearing cover, D-end NBR rubber
150a Stator house complete with stator
153 Bearing, D-end Stainless steel
153b O-ring NBR rubber
154 Bearing, N-end Stainless steel
155 Oil chamber Cast iron, EN-GJL-250 5.1301
157 Corrugated spring (bearing, D-end) Stainless steel
Inconel X750
158 Corrugated spring (bearing, N-end) Carbon steel
1.1248
172 Shaft with rotor Regular iron/stainless steel 1.0570/1.4401
174 Earth screw, external Stainless steel
174a Washer for external earth screw Stainless steel
176 Connector set (internal part)
181 Cable with outer plug part 7G2.5 + 3 x 1
182 Screw Stainless steel 1.4436
186 Screw Stainless steel 1.4436
188 Screw Stainless steel 1.4436
190 Lifting handle Stainless steel 1.4308
193 Plug Stainless steel 1.4436
194 Gasket
198 O-ring NBR rubber
518 Transient barrier (only sensor versions)
520 Moisture switch
521 WIO sensor (only sensor versions)
522 Bracket for WIO sensor (only sensor versions) Stainless steel 1.4310

Material declaration:
Grey cast iron is manufactured according to EN 1561:2012.
Cast stainless steel is manufactured according to EN 10283:2010.

Conversion to other standards such as AISI/ASTM is normative, and products are not manufactured according to these.

25
SL1, SLV pumps
7
Material specification, SL1 and SLV Q variants
Construction

DIN W.-No./
Pos. Component Material
EN standard
6a Tubular pin, D8 x 22 A2 Stainless steel 1.4301
7a Blank rivet, 2.4 x 6 A2 Stainless steel 1.4301
37 O-ring NBR rubber
37a O-ring NBR rubber
46 Seal ring, inlet NBR rubber/stainless steel 1.4301
48 Stator package
SuperVortex impeller Stainless steel 1.4408
49
S-tube® impeller Stainless steel 1.4408
49c Wear ring, impeller Stainless steel 1.4301
50 Pump housing Cast iron, EN-GJL-250 5.1301
55 Stator housing Cast iron, EN-GJL-250 5.1301
58 Cover for oil chamber Cast iron, EN-GJL-250 5.1301
59 Bearing cover Cast iron, EN-GJL-250 5.1301
76 Nameplate Stainless steel 1.4401
92 Clamp Stainless steel 1.4401
102 Circlip
Shaft seal complete
Stainless steel, SiC/SiC
(rotating part of MG1/25-G60 Q1Q1PGG, stationary part of
105
MG1/25-G60 Q1Q1PGG; rotating part of BT-AR/25 BXPFF,
Carbon/ceramic
stationary part of BT-AR/25 BXPFF)
106 O-ring for shaft seal NBR rubber
107 O-ring (cover for oil chamber) NBR rubber
109 O-ring for bearing cover, D-end NBR rubber
150a Stator house complete with stator
153 Bearing, D-end Stainless steel
153b O-ring NBR rubber
154 Bearing, N-end Stainless steel
155 Oil chamber Cast iron, EN-GJL-250 5.1301
157 Corrugated spring (bearing, D-end) Stainless steel
Inconel X750
158 Corrugated spring (bearing, N-end) Carbon steel
1.1248
172 Shaft with rotor Regular iron/stainless steel 1.0570 /1.4401
174 Earth screw, external Stainless steel
174a Washer for external earth screw Stainless steel
176 Connector set (internal part)
181 Cable with outer plug part 7G2.5 + 3 x 1
182 Screw Stainless steel 1.4436
186 Screw Stainless steel 1.4436
188 Screw Stainless steel 1.4436
190 Lifting handle Stainless steel 1.4308
193 Plug Stainless steel 1.4436
194 Gasket
198 O-ring NBR rubber
518 Transient barrier (only sensor versions)
520 Moisture switch
521 WIO sensor (only sensor versions)
522 Bracket for WIO sensor (only sensor versions) Stainless steel 1.4310

Material declaration:
Grey cast iron is manufactured according to EN 1561:2012.
Cast stainless steel is manufactured according to EN 10283:2010.

Conversion to other standards such as AISI/ASTM is normative, and products are not manufactured according to these.

26
SL1, SLV pumps
8

8. Product description

Product description
Features Power cables
Standard cable
Ball bearings
The bearings are greased for life. Outer cable Bending radius
Main bearings: Double-row angular contact ball Cable type [mm2] diameter Fixed Free
[mm]
bearing. [cm] [cm]

Support bearings: Single-row deep-groove ball Lyniflex 4 G 1.5 + 3 x 1 15.5 ± 0.5 60 90


Lyniflex 4 G 2.5 + 3 x 1 17.0 ± 0.5 66 99
bearing.
Lyniflex 7 G 2.5 + 3 x 1 18.5 ± 0.5 74 111
Shaft seal
EMC cable

Outer cable Bending radius


Cable type [mm2] diameter Fixed Free
[mm] [cm] [cm]
3G3GC3G - F3 x 1AiC + 4 G 2.5 17.5 ± 0.5 85 170

TM05 0015 0511


The standard cable length is 10 m. Other cable lengths
are available on request. See List of variants on
page 15.
The number and dimension of cables depend on the
Fig. 13 Double mechanical cartridge shaft seal motor size.
The shaft seal consists of two mechanical seals and Cable entry
separates the motor from the pumped liquid.
The shaft seal is a cartridge seal that enables easy
service. The combination of the primary and secondary
seals in a cartridge results in a shorter assembly
length compared to conventional shaft seals.
Furthermore, this design minimises the risk of incorrect
fitting.
The primary seal is SiC/SiC and the secondary is
carbon/ceramic.

TM05 0016 0511


Motor
The motor is a watertight, totally encapsulated motor.
• Insulation class: H (180 °C).
• Temperature rise class: A (105 °C). Fig. 14 Moisture-proof cable plug
• Enclosure class: IP68.
The stainless steel plug is fastened with a union nut.
For motor protection and sensors, see Sensors below.
The nut and O-rings provide sealing against liquid
penetration.
The plug is filled with a polyamide material that is cast
into the plug around the conductors of the cable to
prevent moisture from penetrating into the motor via
the cable core.
Surface treatment
Grundfos SL1 and SLV pumps are given the following
surface treatment:
• Cataphoresis treatment of all cast iron parts
• Powder painting: NCS 9000N (black), gloss code
30, thickness 100 μm.

27
SL1, SLV pumps
8
Sensors IO 113 sensor module
Product description

TM05 0017 0511

TM05 4166 2112


WIO sensor

Fig. 15 Analog water-in-oil sensor

As standard, the pump is equipped with thermal Fig. 16 Grundfos IO 113 sensor module
switches in the stator windings.
The IO 113 module is a protection module for Grundfos
Customised sensor options
wastewater pumps.
1. Pt1000 sensor in motor windings for stator The IO 113 has inputs for digital and analog pump
temperature measurements. sensors and can stop the pump if a sensor indicates a
2. The WIO sensor fitted in the oil chamber of the pump fault.
pump monitors if water enters the pump from the The IO 113 can be connected to the Dedicated
liquid side. Controls system offered by Grundfos and provides
The sensor measures the water content (0 to 20 %) advanced monitoring functions:
in the oil and converts the value into an analog
• motor temperature
current signal which is sent to the IO 113 sensor
module. It also sends a signal if the water content is • moisture in motor
outside the normal range (warning), or if there is air • water in oil
in the oil chamber (alarm). The sensor is fitted in a • insulation resistance.
stainless steel tube for mechanical protection.
Testing
See fig. 15.
3. The moisture switch fitted in the motor chamber All pumps are tested before leaving the factory.
monitors whether water enters the motor. The factory test report is based on ISO 9906:2012
If moisture is detected in the motor chamber, the grade 3B.
moisture switch will trip out and send a signal to the Test certificates can be ordered directly with the pump
IO 113 sensor module. or separately based on the pump serial number.
Other tests or third-party inspection certificates are
available on request. See section Variants on page 15.

28
SL1, SLV pumps
8
Operating conditions Sound pressure

Product description
The sound pressure level of the pump is lower than the
Pumps without a cooling jacket are only for
limiting values stated in the EC Council directive
submerged installation.
2006/42/EC relating to machinery (the EC Machinery
Directive).

Motor range
Shaft power [kW] Number of poles
1.1 4
1.3 4
S1 operation 1.5 4
S3 operation 2.2 2/4
3 2/4

TM04 2649 2808


4 2/4
6 2
7.5 2/4
9.2 2
11 2
Fig. 17 Operation levels

S1, continuous operation: Pump controllers


Continuous operation S1 when the pump is fully The pumps must be connected to a control box with a
submerged to the top of the motor. motor protection relay with IEC trip class 10 or 15.
Note: Pumps for hazardous locations must be
Operation
connected to a control box with a motor protection
relay with IEC trip class 10.
TM04 4528 1509

The pumps can be controlled by the following pump


controllers:
Stop • Grundfos Dedicated Controls
• LC 107, LCD 107 with air bells
Fig. 18 Continuous operation
• LC 108, LCD 108 with float switches
• Intermittent operation S3 with max. 20 starts per hour • LC 110, LCD 110 with level electrodes.
when the pump is submerged to the bottom of the For further information about Dedicated Controls and
cable plug. The pump must run for max. 4 minutes LC, LCD controllers, please see page 146.
and stop for min. 6 minutes. See fig. 19.
Note: Explosion-proof pumps must always be fully
submerged. Frequency converter operation
All SL1/SLV pump types are designed for
Min. 4 min. speed-controlled operation to keep the energy
Operation consumption at a minimum.
To avoid the risk of sedimentation in the pipes, we
TM04 4527 1509

Min. 6 min. recommend that you operate the speed-controlled


pump within a speed range of 30 % to 100 % and at a
Stop flow rate above 1 m/s.
10 min.
For more information, see the installation and
Fig. 19 Intermittent operation operating instructions (publication number 96771279)
on www.grundfos.com (WebCAPS).
Pumped liquids
Pump Material
Material pH value
type variant
Cast iron impeller and pump
SL1/SLV Standard 6.5 to 14 1)
housing
Stainless steel impeller and cast
SLV Q 6 to 14 1)
iron pump housing

1)
For fluctuating pH values the range is pH 4 to 14.

Liquid temperature: 0 to +40 °C.


When pumping liquids with a density and/or a
kinematic viscosity higher than that of water, use
motors with correspondingly higher outputs.
For short periods (maximum 3 minutes), a temperature
of up to +60 °C is allowed (non-Ex versions only).

29
SL1, SLV pumps
8
Explosion-proof pumps Approval standards
Product description

The SL1 and SLV pumps in the table below have been The SL1 and SLV pumps have been tested by KEMA.
tested by KEMA, and the explosion-proof versions hold The explosion-proof versions hold two examination
an EC type examination certificate issued by KEMA certificates:
according to the ATEX directive. • ATEX (EU): KEMA08ATEX0125X
• IECEX: IECEX KEM08.0039X
Pump types
Both certificates have been issued by KEMA according
SL1.50.65.22 SL1.80.100.22 SLV.65.65.40 SLV.80.100.11
SL1.50.65.30 SL1.80.100.30 SLV.65.80.22 SLV.80.100.13
to the ATEX directive.
SL1.50.65.40 SL1.80.100.40 SLV.65.80.30 SLV.80.100.15
SL1.50.80.22 SL1.80.100.55 SLV.65.80.40 SLV.80.100.22 Explanation to Ex approval
SL1.50.80.30 SL1.80.100.75 SLV.80.80.11 SLV.80.100.40 The SL1 and SLV pumps have the following explosion
SL1.50.80.40 SL1.100.100.40 SLV.80.80.13 SLV.80.100.60 protection classification:
SL1.80.80.15 SL1.100.100.55 SLV.80.80.15 SLV.80.100.75
SL1.80.80.22 SL1.100.100.75 SLV.80.80.22 SLV.80.100.92 Direct-drive pump, without
CE 0344 II 2 G Ex c d IIB T4 Gb
SL1.80.80.30 SL1.100.150.40 SLV.80.80.40 SLV.80.100.110 sensor
SL1.80.80.40 SL1.100.150.55 SLV.80.80.60 SLV.100.100.30 Direct-drive pump, with
CE 0344 II 2 G Ex c d mb IIB T4 Gb
SL1.80.80.55 SL1.100.150.75 SLV.80.80.75 SLV.100.100.40 sensor
SL1.80.80.75 SLV.65.65.22 SLV.80.80.92 SLV.100.100.55 Pump driven by frequency
CE 0344 II 2 G Ex c d IIB T3 Gb
converter, without sensor
SL1.80.100.15 SLV.65.65.30 SLV.80.80.110 SLV.100.100.75
Pump driven by frequency
CE 0344 II 2 G Ex c d mb IIB T3 Gb
converter, with sensor

Europe
Directive/standard Code Description
CE marking of conformity according to the ATEX directive 94/9/EC, Annex X. 0344 is the number of the
CE 0344 =
notified body which has certified the quality system for ATEX.
= Explosion protection mark.

ATEX Equipment group according to the ATEX directive, Annex II, point 2.2, defining the requirements applicable to
II =
the equipment in this group.
Equipment category according to the ATEX directive, Annex II, point 2.2, defining the requirements applicable
2 =
to the equipment in this category.
G = Explosive atmosphere caused by gases or vapours.
Ex = The equipment conforms to the harmonised European standard.
c = Constructional safety according to EN 13463-5:2011 and EN 13463-1:2009.
d = Flame-proof enclosure according to EN 60079-1:2007.
mb = Encapsulation according to EN 60079-18:2009.
Harmonised European II = Suitable for use in explosive atmospheres (not mines).
standard EN 60079-0 B = Classification of gases according to EN 60079-0:2012, Annex A. Gas group B includes gas group A.
T4/T3 = Maximum surface temperature is 135 °C/200 °C according to EN 60079-0:2012.
Gb = Equipment protection level.
The letter X in the certificate number indicates that the equipment is subject to special conditions for safe use.
X
The conditions are mentioned in the certificate and the installation and operating instructions.

Australia
Explosion-proof variants for Australia are approved as Ex d IIB T4/T3 & Ex d mb II B T4/T3 Gb.

Standard Code Description


Ex = The equipment conforms to the harmonised European standard.
d = Flame-proof enclosure according to IEC 60079-1:2007.
mb = Encapsulation according to IEC 60079-18.
II = Suitable for use in explosive atmospheres (not mines).
IEC 60079-0 and IEC
60079-1 B = Classification of gases according to IEC 60079-0:2004, Annex A. Gas group B includes gas group A.
T4/T3 = Maximum surface temperature is 135 °C/200 °C according to IEC 60079-0:2004.
Gb = Equipment protection level.
The letter X in the certificate number indicates that the equipment is subject to special conditions for safe use.
X
The conditions are mentioned in the certificate and the installation and operating instructions.

30
SL1, SLV pumps
8
Wiring diagrams

Product description
Yellow/green

TM04 6884 0710


Standard version Sensor version Sensor version
Thermal switches and Thermal switch, Pt1000 resistor, moisture Thermal switch, PTC thermistor*, moisture
moisture switch* switch and water-in-oil sensor switch and water-in-oil sensor

* Pumps from 4 kW and up sold in Australia/New Zealand are fitted with a PTC thermistor.

Fig. 20 Wiring diagram, 7-core cable, DOL

Yellow/green

TM04 6885 0710

Standard version Sensor version Sensor version


Thermal switches and Thermal switch, Pt1000 resistor, moisture Thermal switch, PTC thermistor*, moisture
moisture switch* switch and water-in-oil sensor switch and water-in-oil sensor

* Pumps from 4 kW and up sold in Australia/New Zealand are fitted with a PTC thermistor.

Fig. 21 Wiring diagram, 10-core cable, star/delta (Y/D)

31
SL1, SLV pumps
8
Product description

Yellow/green

TM04 6886 0710


Standard version Sensor version Sensor version
Thermal switches and Thermal switch, Pt1000 resistor, moisture Thermal switch, PTC thermistor*, moisture
moisture switch* switch and water-in-oil sensor switch and water-in-oil sensor

* Pumps from 4 kW and up sold in Australia/New Zealand are fitted with a PTC thermistor.

Fig. 22 Wiring diagram, 10-core cable, star-connected (Y)

Yellow/green

TM04 6887 0710

Standard version Sensor version Sensor version


Thermal switches and Thermal switch, Pt1000 resistor, moisture Thermal switch, PTC thermistor*, moisture
moisture switch* switch and water-in-oil sensor switch and water-in-oil sensor

* Pumps from 4 kW and up sold in Australia/New Zealand are fitted with a PTC thermistor.

Fig. 23 Wiring diagram, 10-core cable, delta-connected (D)

32
SL1, SLV pumps
9

9. Curve charts and technical data

Curve charts and technical data


The following pages are divided into sections.
Pages 34 and 35 give a brief explanation of how to read the curve charts and the curve conditions etc.
Performance curves and technical data

Page Pump curves Page Pump curves Page Pump curves Page Pump curves
Performance curves Performance curves Performance curves Performance curves
36 64 92 120
SL1.50.65.22.2.--.C SL1.80.100.30.4.--.C SLV.65.80.30.2.--.C SLV.80.100.15.4.--.C
Performance curves Performance curves Performance curves Performance curves
38 66 94 122
SL1.50.65.30.2.--.C SL1.80.100.40.4.--.C SLV.65.80.40.2.--.C SLV.80.100.22.4.--.C
Performance curves Performance curves Performance curves Performance curves
40 68 96 124
SL1.50.65.40.2.--.C SL1.80.100.55.4.--.C SLV.80.80.11.4.--.C SLV.80.100.40.2.--.C
Performance curves Performance curves Performance curves Performance curves
42 70 98 126
SL1.50.80.22.2.--.C SL1.80.100.75.4.--.C SLV.80.80.13.4.--.C SLV.80.100.40.4.--.C
Performance curves Performance curves Performance curves Performance curves
44 72 100 128
SL1.50.80.30.2.--.C SL1.100.100.40.4.--.C SLV.80.80.15.4.--.C SLV.80.100.60.2.--.C
Performance curves Performance curves Performance curves Performance curves
46 74 102 130
SL1.50.80.40.2.--.C SL1.100.100.55.4.--.C SLV.80.80.22.4.--.C SLV.80.100.75.2.--.C
Performance curves Performance curves Performance curves Performance curves
48 76 104 132
SL1.80.80.15.4.--.C SL1.100.100.75.4.--.C SLV.80.80.40.2.--.C SLV.80.100.92.2.--.C
Performance curves Performance curves Performance curves Performance curves
50 78 106 134
SL1.80.80.22.4.--.C SL1.100.150.40.4.--.C SLV.80.80.40.4.--.C SLV.80.100.110.2.--.C
Performance curves Performance curves Performance curves Performance curves
52 80 108 136
SL1.80.80.30.4.--.C SL1.100.150.55.4.--.C SLV.80.80.60.2.--.C SLV.100.100.30.4.--.C
Performance curves Performance curves Performance curves Performance curves
54 82 110 138
SL1.80.80.40.4.--.C SL1.100.150.75.4.--.C SLV.80.80.75.2.--.C SLV.100.100.40.4.--.C
Performance curves Performance curves Performance curves Performance curves
56 84 112 140
SL1.80.80.55.4.--.C SLV.65.65.22.2.--.C SLV.80.80.92.2.--.C SLV.100.100.55.4.--.C
Performance curves Performance curves Performance curves Performance curves
58 86 114 142
SL1.80.80.75.4.--.C SLV.65.65.30.2.--.C SLV.80.80.110.2.--.C SLV.100.100.75.4.--.C
Performance curves Performance curves Performance curves
60 88 116
SL1.80.100.15.4.--.C SLV.65.65.40.2.--.C SLV.80.100.11.4.--.C
Performance curves Performance curves Performance curves
62 90 118
SL1.80.100.22.4.--.C SLV.65.80.22.2.--.C SLV.80.100.13.4.--.C

33
SL1, SLV pumps
9
How to read the curve charts
Curve charts and technical data

Total pump head


H = Htotal QH curve Pump type

P H
[kW] [m]
SL1.80.100.15
5.0 10 50 Hz
QH ISO 9906:2012 3B
4.5 9 Eta
[%]
4.0 8 80
Eta 2
3.5 7 70 Eta2 is the hydraulic efficiency
(pump)

3.0 6 Eta 1 60 Eta1 is the total efficiency


(pump + motor)
2.5 5 50

2.0 4 NPSH 40
P1 [m] Power curves indicating input
1.5 3 P2 6 30 power [P1] and output power [P2]
of the pump shown
1.0 2 4 20
NPSH cuves. When sizing the
0.5 1 2 10
NPSH pumps, add a safety margin of at
least 0.5 m.
0.0 0 0 0
0 4 8 12 16 20 24 28 32 36 Q [l/s]

TM04 3460 1314


DN 100

0 1 2 3 4 v [m/s]
DN 150

0.0 0.5 1.0 1.5 2.0 v [m/s]

34
SL1, SLV pumps
9
Curve conditions Performance tests

Curve charts and technical data


The guidelines below apply to the curves shown in the Pumps are tested according to ISO 9906:2012
performance charts on pages 36 to 143. grade 3B.
• Tolerances according to ISO 9906:2012, grade 3B. Testing equipment and measuring instruments are
• The curves show pump performance with different designed and calibrated in accordance with mentioned
impeller diameters at the rated speed. standards.
• The bold part of the curves show the Pump is approved according to tolerances for entire
recommended operating range. curve, specified in grade 3B.
• The curves apply to the pumping of airless water at For customized duty point or other grades with 5 point
a temperature of +20 °C and a kinematic viscosity of test certificate.
1 mm2/s (1 cSt). Please contact Grundfos in order to agree on terms
• ETA: The lines show the hydraulic efficiency values, before ordering.
i.e. ETA1 is the total efficiency (pump + motor) and
ETA2 is the hydraulic efficiency (pump). Certificates
• NPSH: The curves show average values measured
under the same conditions as the performance Certificates have to be confirmed for every order and
curves. When sizing the pump, add a safety margin are available on request as follows:
of at least 0.5 m. • certificate of compliance with the order
• In the case of densities differing from 1000 kg/m3, (EN 10204-2.1)
the discharge pressure is proportional to the • pump test sheet.
density.
• When pumping liquids with a density higher than Witness test
1000 kg/m3, motors with correspondingly higher
outputs must be used. It is possible for the customer to witness the testing
procedure according to ISO 9906:2012.
Calculation of total head The witness test is not a certificate and will not result in
The total pump head consists of the height difference a written statement from Grundfos. The witness test
between the measuring points + the differential head + only guarantees that everything is carried out as
the dynamic head. prescribed in the testing procedure.
If the customer wants to carry out a witness test of the
H total = H geo + Hstat + Hdyn pump performance, such request must be stated on
the order.
Hgeo: Height difference between measuring points.
Hstat: Differential head between suction and the
discharge side of the pump.
Hdyn: Calculated values based on the velocity of the
pumped liquid on the suction and the
discharge side of the pump.

35
10
Performance curves and technical data

10. Performance curves and technical data


SL1.50.65
Performance curves SL1.50.65.22.2.--.C

P H
[kW] [m] SL1.50.65.22
9 18 QH 50 Hz
ISO 9906:2012 3B
8 16 Eta
[%]
Eta 2
7 14 70

6 12 60
Eta 1

5 10 50

4 8 NPSH 40
[m]
3 6 P1 12 30
P2
2 4 8 20

NPSH
1 2 4 10

0 0 0 0
0 2 4 6 8 10 12 14 16 18 20 22 Q [l/s]
DN 65

TM04 3473 1314


0 1 2 3 4 5 6 v [m/s]
DN 80
0 1 2 3 4 v [m/s]

36
10

Performance curves and technical data


Dimensional sketches SL1.50.65.22.2.--.C

TM04 2793 3008 - TM04 2795 3008 - TM04 2794 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
641 366 171 216 321 69 DN 65 145 4 x M16 DN 65 145 4 x 18 63.8

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


210 95 140 525 514 364 81 1.5 738 321 1 175 266 DN 65 4XM16

V1 V2 V3 V4 V5 V6 V7 V∅
771 358 130 325 270 478.5 65 19

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50D 3 x 380-415 V Y 2.9 2.2 2 2903 DOL 5.4 35 83.9 85.6 85.1 0.74 0.83 0.88 0.0092 26
50E 3 x 220-240 V D 2.9 2.2 2 2903 DOL 9.2 61 83.9 85.6 85.1 0.74 0.83 0.88 0.0092 26
50B 3 x 400-415 V Y 2.9 2.2 2 2903 DOL 5.4 35 83.9 85.6 85.1 0.74 0.83 0.88 0.0092 26
51D 3 x 380-415 V D 2.9 2.2 2 2903 Y/D 5.4 35 83.9 85.6 85.1 0.74 0.83 0.88 0.0092 26

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 50 10 20 68 H A 40 4 - 14

37
10
Performance curves and technical data

Performance curves SL1.50.65.30.2.--.C

P H
[kW] [m]
26 SL1.50.65.30
50 Hz Eta
6 24 ISO 9906:2012 3B [%]
QH
Eta 2
22 75
5 20 70
18 65
4 16 Eta 1 60
14 P1 55
3 12 50
P2
10 45
2 8 NPSH 40
[m]
6 12 35
1 4 8 30
NPSH
2 4 25
0 0 0 20
0 2 4 6 8 10 12 14 16 18 20 22 Q [l/s]
DN 65

TM04 3474 1314


0 1 2 3 4 5 6 v [m/s]
DN 80

0 1 2 3 4 v [m/s]

38
10

Performance curves and technical data


Dimensional sketches SL1.50.65.30.2.--.C

TM04 2793 3008 - TM04 2795 3008 - TM04 2794 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
641 366 171 216 321 69 DN 65 145 4 x M16 DN 65 145 4 x 18 92.1

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


210 95 140 525 514 364 81 1 1/2" 738 321 1 175 266 DN 65 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
771 358 130 325 270 478.5 65 19

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50D 3 x 380-415 V Y 3.8 3.0 2 2909 DOL 7.4 45 84.0 85.6 85.6 0.67 0.79 0.85 0.0118 65
50E 3 x 220-240 V D 3.8 3.0 2 2909 DOL 11.9 78 84.0 85.6 85.6 0.67 0.79 0.85 0.0118 65
50B 3 x 400-415 V Y 3.8 3.0 2 2909 DOL 7.4 45 84.0 85.6 85.6 0.67 0.79 0.85 0.0118 65
51D 3 x 380-415 V D 3.8 3.0 2 2909 Y/D 7.4 45 84.0 85.6 85.6 0.67 0.79 0.85 0.0118 65

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 50 10 20 68 H A 40 4 - 14

39
10
Performance curves and technical data

Performance curves SL1.50.65.40.2.--.C

P H
[kW] [m]
14 28 QH
SL1.50.65.40
50 Hz
13 26
ISO 9906:2012 3B Eta
12 24 [%]
11 22 75
Eta 2
10 20 70
9 18 65
8 16 60
Eta 1
7 14 55
6 12 50
5 10 P1 45
4 8 NPSH 40
P2
[m]
3 6 12 35
2 4 8 30
NPSH
1 2 4 25
0 0 0 20
0 2 4 6 8 10 12 14 16 18 20 22 Q [l/s]
DN 65

TM04 3475 1314


0 1 2 3 4 5 6 v [m/s]
DN 80

0 1 2 3 4 v [m/s]

40
10

Performance curves and technical data


Dimensional sketches SL1.50.65.40.2.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
677 407 200 227 379 69 DN 65 145 4 x M16 DN 65 145 4 x 18 116

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


210 95 140 566 555 375 81 1 1/2" 774 379 1 175 266 DN 65 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
807 341 130 325 270 519 65 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51D 3 x 380-415 V D 4.9 4.0 2 2933 Y/D 9.0 86 83.2 85.3 86.2 0.77 0.83 0.88 0.0165 68
51E 3 x 220-240 V D 4.9 4.0 2 2933 Y/D 15.1 149 83.2 85.3 86.2 0.77 0.83 0.88 0.0165 68
50B 3 x 400-415 V D 4.9 4.0 2 2933 DOL 9.0 86 83.2 85.3 86.2 0.77 0.83 0.88 0.0165 68
50D 3 x 380-415 V D 4.9 4.0 2 2933 DOL 9.0 86 83.2 85.3 86.2 0.77 0.83 0.88 0.0165 68

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 50 10 20 68 H A 40 4 - 14

41
10
Performance curves and technical data

SL1.50.80
Performance curves SL1.50.80.22.2.--.C

P H
[kW] [m]
SL1.50.80.22
10 20 50 Hz
ISO 9906:2012 3B
9 18 QH Eta
[%]
8 16 80
Eta 2
7 14 70

6 12 60
Eta 1
5 10 50

4 8 NPSH 40
[m]
3 6 P1 12 30
P2
2 4 8 20
NPSH
1 2 4 10

0 0 0 0
0 2 4 6 8 10 12 14 16 18 20 22 Q [l/s]
DN 80

TM04 3476 1314


0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 v [m/s]
DN 100

0.0 0.5 1.0 1.5 2.0 2.5 v [m/s]

42
10

Performance curves and technical data


Dimensional sketches SL1.50.80.22.2.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
641 366 171 216 321 69 DN 65 145 4 x M16 DN 80 160 8 x 18 64.5

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 548 526 376 81 1 1/2" 772 321 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
771 373 130 325 270 482 80 19

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50D 3 x 380-415 V Y 2.9 2.2 2 2903 DOL 5.4 35 83.9 85.6 85.1 0.74 0.83 0.88 0.0092 26
50E 3 x 220-240 V D 2.9 2.2 2 2903 DOL 9.2 61 83.9 85.6 85.1 0.74 0.83 0.88 0.0092 26
50B 3 x 400-415 V Y 2.9 2.2 2 2903 DOL 5.4 35 83.9 85.6 85.1 0.74 0.83 0.88 0.0092 26
51D 3 x 380-415 V D 2.9 2.2 2 2903 Y/D 5.4 35 83.9 85.6 85.1 0.74 0.83 0.88 0.0092 26

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 50 10 20 68 H A 40 4 - 14

43
10
Performance curves and technical data

Performance curves SL1.50.80.30.2.--.C

P H
[kW] [m]
12 24
SL1.50.80.30
50 Hz
Eta
11 22 QH ISO 9906:2012 3B
[%]
10 20 75

9 18 Eta 2 70

8 16 65

7 14 60
Eta 1
6 12 55

5 10 50

4 8 NPSH 45
P1 [m]
3 6 P2 12 40

2 4 8 35
NPSH
1 2 4 30

0 0 0 25
0 2 4 6 8 10 12 14 16 18 20 22 Q [l/s]
DN 80

TM04 3516 1314


0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 v [m/s]
DN 100

0.0 0.5 1.0 1.5 2.0 2.5 v [m/s]

44
10

Performance curves and technical data


Dimensional sketches SL1.50.80.30.2.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
641 366 171 216 321 69 DN 65 145 4 x M16 DN 80 160 8 x 18 92.8

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 548 526 376 81 1 1/2" 772 321 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
771 373 130 325 270 482 80 19

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50E 3 x 220-240 V D 3.8 3.0 2 2909 DOL 11.9 78 84.0 85.6 85.6 0.67 0.79 0.85 0.0118 65
50D 3 x 380-415 V Y 3.8 3.0 2 2909 DOL 7.4 45 84.0 85.6 85.6 0.67 0.79 0.85 0.0118 65
50B 3 x 400-415 V Y 3.8 3.0 2 2909 DOL 7.4 45 84.0 85.6 85.6 0.67 0.79 0.85 0.0118 65
51D 3 x 380-415 V D 3.8 3.0 2 2909 Y/D 7.4 45 84.0 85.6 85.6 0.67 0.79 0.85 0.0118 65

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 50 10 20 68 H A 40 4 - 14

45
10
Performance curves and technical data

Performance curves SL1.50.80.40.2.--.C

P H
[kW] [m]
14 28 SL1.50.80.40
QH 50 Hz
13 26
ISO 9906:2012 3B Eta
12 24 [%]
11 22 75
10 20 Eta 2 70
9 18 65
8 16 60
Eta 1
7 14 55
6 12 50
5 10 P1 45
4 8 P2 NPSH 40
[m]
3 6 12 35
2 4 8 30
NPSH
1 2 4 25
0 0 0 20
0 2 4 6 8 10 12 14 16 18 20 22 Q [l/s]
DN 80

TM04 3517 1314


0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 v [m/s]
DN 100

0.0 0.5 1.0 1.5 2.0 2.5 v [m/s]

46
10

Performance curves and technical data


Dimensional sketches SL1.50.80.40.2.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
677 407 200 227 379 69 DN 65 145 4 x M16 DN 80 160 8 x 18 116.8

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 589 567 387 81 1 1/2" 808 379 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
807 373 130 325 270 523 80 19

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51D 3 x 380-415 V D 4.9 4.0 2 2933 Y/D 9.0 86 83.2 85.3 86.2 0.77 0.83 0.88 0.0165 68
51E 3 x 220-240 V D 4.9 4.0 2 2933 Y/D 15.1 149 83.2 85.3 86.2 0.77 0.83 0.88 0.0165 68
50B 3 x 400-415 V D 4.9 4.0 2 2933 DOL 9.0 86 83.2 85.3 86.2 0.77 0.83 0.88 0.0165 68
50D 3 x 380-415 V D 4.9 4.0 2 2933 DOL 9.0 86 83.2 85.3 86.2 0.77 0.83 0.88 0.0165 68

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 50 10 20 68 H A 40 4 - 14

47
10
Performance curves and technical data

SL1.80.80
Performance curves SL1.80.80.15.4.--.C

P H
[kW] [m]
SL1.80.80.15
5.0 10 50 Hz
ISO 9906:2012 3B
4.5 9 Eta
QH [%]
4.0 8 80
Eta 2
3.5 7 70

3.0 6 Eta 1
60

2.5 5 50

2.0 4 40
P1
1.5 3 P2 NPSH 30
[m]
1.0 2 4 20

0.5 1 2 10
NPSH
0.0 0 0 0
0 4 8 12 16 20 24 28 32 36 Q [l/s]
DN 80

TM04 3518 1314


0 1 2 3 4 5 6 7 v [m/s]
DN 100

0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 v [m/s]

48
10

Performance curves and technical data


Dimensional sketches SL1.80.80.15.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
682 435 171 272 347 89 DN 100 180 8 x M16 DN 80 160 8 x 18 100.5

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 617 595 432 81 1 1/2" 793 347 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
812 393 130 355 300 551 80 19

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50D 3 x 380-415 V Y 1.9 1.5 4 1452 DOL 4.4 29 81.8 83.9 84.3 0.48 0.61 0.70 0.0196 40
50E 3 x 220-240 V D 1.9 1.5 4 1452 DOL 7.3 49 81.8 83.9 84.3 0.48 0.61 0.70 0.0196 40
50B 3 x 400-415 V Y 1.9 1.5 4 1452 DOL 4.4 29 81.8 83.9 84.3 0.48 0.61 0.70 0.0196 40

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 80 10 20 68 H A 40 4 - 14

49
10
Performance curves and technical data

Performance curves SL1.80.80.22.4.--.C

P H
[kW] [m]
SL1.80.80.22
4.5 18 50 Hz Eta
ISO 9906:2012 3B [%]
4.0 16 80
Eta 2
3.5 14 70
QH
Eta 1
3.0 12 60
P1
2.5 10 50
P2
2.0 8 40

1.5 6 NPSH 30
[m]
1.0 4 8 20

0.5 2 4 10
NPSH
0.0 0 0 0
0 4 8 12 16 20 24 28 32 36 Q [l/s]
DN 80

TM04 3519 1314


0 1 2 3 4 5 6 7 v [m/s]
DN 100

0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 v [m/s]

50
10

Performance curves and technical data


Dimensional sketches SL1.80.80.22.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
682 435 171 272 347 89 DN 100 180 8 x M16 DN 80 160 8 x 18 108.1

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 617 595 432 81 1 1/2" 793 347 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
812 393 130 355 300 551 80 19

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50D 3 x 380-415 V Y 2.7 2.2 4 1462 DOL 6.0 38 82.9 85.4 85.7 0.52 0.65 0.73 0.0621 41
50E 3 x 220-240 V D 2.7 2.2 4 1462 DOL 9.9 66 82.9 85.4 85.7 0.52 0.65 0.73 0.0621 41
50B 3 x 400-415 V Y 2.7 2.2 4 1462 DOL 6.0 38 82.9 85.4 85.7 0.52 0.65 0.73 0.0621 41
51D 3 x 380-415 V D 2.7 2.2 4 1462 Y/D 6.0 38 82.9 85.4 85.7 0.52 0.65 0.73 0.0621 41

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 80 10 20 68 H A 40 4 - 14

51
10
Performance curves and technical data

Performance curves SL1.80.80.30.4.--.C

P H
[kW] [m]
SL1.80.80.30
8 16 50 Hz
Eta
ISO 9906:2012 3B [%]
Eta 2
7 14 QH 70

6 12 Eta 1 60

5 10 50

4 8 40

3 6 P1 30
NPSH
P2 [m]
2 4 8 20

1 2 4 10
NPSH

0 0 0 0
0 5 10 15 20 25 30 35 40 45 Q [l/s]
DN 80

TM04 3520 1314


0 1 2 3 4 5 6 7 8 9 v [m/s]
DN 100

0 1 2 3 4 5 6 v [m/s]

52
10

Performance curves and technical data


Dimensional sketches SL1.80.80.30.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
711 505 200 319 397 118 DN 100 180 8 x M16 DN 80 160 8 x 18 130.6

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 687 665 479 81 1 1/2" 793 397 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
841 422 130 355 300 621 80 19

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50D 3 x 380-415 V Y 3.7 3.0 4 1453 DOL 8.5 45 83.6 85.6 85.7 0.57 0.69 0.77 0.0775 64
50E 3 x 220-240 V D 3.7 3.0 4 1453 DOL 12.8 78 83.6 85.6 85.7 0.57 0.69 0.77 0.0775 64
50B 3 x 400-415 V Y 3.7 3.0 4 1453 DOL 8.5 45 83.6 85.6 85.7 0.57 0.69 0.77 0.0775 64
51D 3 x 380-415 V D 3.7 3.0 4 1453 Y/D 8.5 45 83.6 85.6 85.7 0.57 0.69 0.77 0.0775 64

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 80 10 20 68 H A 40 4 - 14

53
10
Performance curves and technical data

Performance curves SL1.80.80.40.4.--.C

P H
[kW] [m]
SL1.80.80.40
9 18 50 Hz
QH
ISO 9906:2012 3B
8 16 Eta
[%]
Eta 2
7 14 70

Eta 1
6 12 60

5 10 50

P1
4 8 40
P2
3 6 NPSH 30
[m]
2 4 8 20

1 2 4 10
NPSH

0 0 0 0
0 5 10 15 20 25 30 35 40 45 50 Q [l/s]
DN 80

TM04 3521 1314


0 1 2 3 4 5 6 7 8 9 10 v [m/s]
DN 100

0 1 2 3 4 5 6 v [m/s]

54
10

Performance curves and technical data


Dimensional sketches SL1.80.80.40.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
748 505 200 319 397 118 DN 100 180 8 x M16 DN 80 160 8 x 18 146.9

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 687 665 479 81 1.5 830 397 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
878 422 130 355 300 621 80 19

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51E 3 x 220-240 V D 4.8 4.0 4 1465 Y/D 17.7 113 85.0 87.1 87.4 0.50 0.63 0.72 0.1167 98
50B 3 x 400-415 V D 4.8 4.0 4 1465 DOL 10.8 65 85.0 87.1 87.4 0.50 0.63 0.72 0.1167 98
50D 3 x 380-415 V D 4.8 4.0 4 1465 DOL 10.8 65 85.0 87.1 87.4 0.50 0.63 0.72 0.1167 98
51D 3 x 380-415 V D 4.8 4.0 4 1465 Y/D 10.8 65 85.0 87.1 87.4 0.50 0.63 0.72 0.1167 98

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 80 10 20 68 H A 40 4 - 14

55
10
Performance curves and technical data

Performance curves SL1.80.80.55.4.--.C

P H
[kW] [m]
SL1.80.80.55
22 22 QH 50 Hz
20 20 ISO 9906:2012 3B

18 18 Eta
[%]
16 16 80
Eta 2
14 14 70
Eta 1
12 12 60

10 10 50

8 8 40
P1
6 6 NPSH 30
P2 [m]
4 4 8 20

2 2 4 10
NPSH
0 0 0 0
0 5 10 15 20 25 30 35 40 45 50 55 Q [l/s]
DN 80

TM04 3522 1314


0 2 4 6 8 10 v [m/s]
DN 100

0 1 2 3 4 5 6 7 v [m/s]

56
10

Performance curves and technical data


Dimensional sketches SL1.80.80.55.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
755 505 200 319 397 118 DN 100 180 8 x M16 DN 80 160 8 x 18 159

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 687 665 479 81 1 1/2" 837 397 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
885 422 130 355 300 621 80 19

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51D 3 x 380-415 V D 6.3 5.5 4 1463 Y/D 12.0 81 89.0 89.6 89.1 0.70 0.80 0.85 0.1509 120
51E 3 x 220-240 V D 6.3 5.5 4 1463 Y/D 20.2 141 89.0 89.6 89.1 0.70 0.80 0.85 0.1509 120
50D 3 x 380-415 V D 6.3 5.5 4 1463 DOL 12.0 81 89.0 89.6 89.1 0.70 0.80 0.85 0.1509 120
50B 3 x 400-415 V D 6.3 5.5 4 1463 DOL 12.0 81 89.0 89.6 89.1 0.70 0.80 0.85 0.1509 120

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 80 10 20 68 H A 40 4 - 14

57
10
Performance curves and technical data

Performance curves SL1.80.80.75.4.--.C

P H
[kW] [m]
26 26 SL1.80.80.75
50 Hz
24 24 QH
ISO 9906:2012 3B
22 22
20 20
Eta
18 18 [%]
16 16 80
14 14 70
Eta 2
12 12 60
Eta 1
10 10 50
P1
8 8 NPSH 40
[m]
6 6 P2 15 30
4 4 10 20
2 2 5 10
NPSH
0 0 0 0
0 5 10 15 20 25 30 35 40 45 50 55 60 Q [l/s]
DN 80

TM04 3523 1314


0 2 4 6 8 10 12v [m/s]
DN 100

0 1 2 3 4 5 6 7 v [m/s]

58
10

Performance curves and technical data


Dimensional sketches SL1.80.80.75.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
818 530 217 328 423 118 DN 100 180 8 x M16 DN 80 160 8 x 18 195.5

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 712 690 488 81 1 1/2" 900 423 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
948 422 130 355 300 646 80 19

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51D 3 x 380-415 V D 8.4 7.5 4 1463 Y/D 16.1 111 90.7 91.1 90.5 0.68 0.78 0.83 0.2103 177
51E 3 x 220-240 V D 8.4 7.5 4 1463 Y/D 26.7 192 90.7 91.1 90.5 0.68 0.78 0.83 0.2103 177
50B 3 x 400-415 V D 8.4 7.5 4 1463 DOL 16.1 111 90.7 91.1 90.5 0.68 0.78 0.83 0.2103 177
50D 3 x 380-415 V D 8.4 7.5 4 1463 DOL 16.1 111 90.7 91.1 90.5 0.68 0.78 0.83 0.2103 177

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 80 10 20 68 H A 40 4 - 14

59
10
Performance curves and technical data

SL1.80.100
Performance curves SL1.80.100.15.4.--.C

P H
[kW] [m]
SL1.80.100.15
5.0 10 50 Hz
QH ISO 9906:2012 3B
4.5 9 Eta
[%]
4.0 8 80
Eta 2
3.5 7 70

3.0 6 Eta 1 60

2.5 5 50

2.0 4 NPSH 40
P1 [m]
1.5 3 P2 6 30

1.0 2 4 20

0.5 1 2 10
NPSH

0.0 0 0 0
0 4 8 12 16 20 24 28 32 36 Q [l/s]
DN 100

TM04 3460 1314


0 1 2 3 4 v [m/s]
DN 150

0.0 0.5 1.0 1.5 2.0 v [m/s]

60
10

Performance curves and technical data


Dimensional sketches SL1.80.100.15.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
682 435 171 272 347 90 DN 100 180 8 x M16 DN 100 180 8 x 18 100.8

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 878 652 489 110 2" 832 347 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
812 364 130 355 300 598 100 19

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50E 3 x 220-240 V D 1.9 1.5 4 1452 DOL 7.3 49 81.8 83.9 84.3 0.48 0.61 0.70 0.0196 40
50D 3 x 380-415 V Y 1.9 1.5 4 1452 DOL 4.4 29 81.8 83.9 84.3 0.48 0.61 0.70 0.0196 40
50B 3 x 400-415 V Y 1.9 1.5 4 1452 DOL 4.4 29 81.8 83.9 84.3 0.48 0.61 0.70 0.0196 40

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 80 10 20 68 H A 40 4 - 14

61
10
Performance curves and technical data

Performance curves SL1.80.100.22.4.--.C

P H
[kW] [m]
SL1.80.100.22
8 16 50 Hz
Eta
ISO 9906:2012 3B [%]
7 14 80
Eta 2
QH
6 12 70

Eta 1
5 10 60

4 8 50

3 6 40
NPSH
P1 [m]
2 4 P2 8 30

1 2 4 20
NPSH
0 0 0 10
0 5 10 15 20 25 30 35 40 Q [l/s]
DN 100

TM04 3461 1314


0 1 2 3 4 5 v [m/s]
DN 150

0.0 0.5 1.0 1.5 2.0 v [m/s]

62
10

Performance curves and technical data


Dimensional sketches SL1.80.100.22.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
682 435 171 272 347 90 DN 100 180 8 x M16 DN 100 180 8 x 18 109.3

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 878 652 489 110 2" 832 347 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
812 364 130 355 300 598 100 19

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50D 3 x 380-415 V Y 2.7 2.2 4 1462 DOL 6.0 38 82.9 85.4 85.7 0.52 0.65 0.73 0.0621 41
50E 3 x 220-240 V D 2.7 2.2 4 1462 DOL 9.9 66 82.9 85.4 85.7 0.52 0.65 0.73 0.0621 41
50B 3 x 400-415 V Y 2.7 2.2 4 1462 DOL 6.0 38 82.9 85.4 85.7 0.52 0.65 0.73 0.0621 41
51D 3 x 380-415 V D 2.7 2.2 4 1462 Y/D 6.0 38 82.9 85.4 85.7 0.52 0.65 0.73 0.0621 41

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 80 10 20 68 H A 40 4 - 14

63
10
Performance curves and technical data

Performance curves SL1.80.100.30.4.--.C

P H
[kW] [m]
SL1.80.100.30
8 16 50 Hz
Eta
ISO 9906:2012 3B [%]
Eta 2
7 14 QH 70

6 12 Eta 1 60

5 10 50

4 8 40

P1
3 6 30
P2 NPSH
[m]
2 4 8 20

1 2 4 10
NPSH

0 0 0 0
0 5 10 15 20 25 30 35 40 45 Q [l/s]
DN 100

TM04 3462 1314


0 1 2 3 4 5 6 v [m/s]
DN 150

0.0 0.5 1.0 1.5 2.0 2.5 v [m/s]

64
10

Performance curves and technical data


Dimensional sketches SL1.80.100.30.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
726 505 200 319 397 115 DN 100 180 8 x M16 DN 100 180 8 x 18 131.5

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 948 722 536 110 2" 851 397 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
856 389 130 355 300 668 100 19

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50E 3 x 220-240 V D 3.7 3.0 4 1453 DOL 12.8 78 83.6 85.6 85.7 0.57 0.69 0.77 0.0775 64
50D 3 x 380-415 V Y 3.7 3.0 4 1453 DOL 8.5 45 83.6 85.6 85.7 0.57 0.69 0.77 0.0775 64
50B 3 x 400-415 V Y 3.7 3.0 4 1453 DOL 8.5 45 83.6 85.6 85.7 0.57 0.69 0.77 0.0775 64
51D 3 x 380-415 V D 3.7 3.0 4 1453 Y/D 8.5 45 83.6 85.6 85.7 0.57 0.69 0.77 0.0775 64

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 80 10 20 68 H A 40 4 - 14

65
10
Performance curves and technical data

Performance curves SL1.80.100.40.4.--.C

P H
[kW] [m]
SL1.80.100.40
9 18 50 Hz Eta
ISO 9906:2012 3B [%]
QH
8 16 80
Eta 2
7 14 70
Eta 1
6 12 60

5 10 50

P1
4 8 40
P2
3 6 NPSH 30
[m]
2 4 10 20

1 2 5 10
NPSH
0 0 0 0
0 5 10 15 20 25 30 35 40 45 50 Q [l/s]
DN 100

TM04 3457 1314


0 1 2 3 4 5 6 v [m/s]
DN 150

0.0 0.5 1.0 1.5 2.0 2.5 v [m/s]

66
10

Performance curves and technical data


Dimensional sketches SL1.80.100.40.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
748 505 200 319 397 115 DN 100 180 8 x M16 DN 100 180 8 x 18 147.8

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 948 722 536 110 2" 873 397 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
878 389 130 355 300 668 100 19

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51E 3 x 220-240 V D 4.8 4.0 4 1465 Y/D 17.7 113 85.0 87.1 87.4 0.50 0.63 0.72 0.1167 98
50B 3 x 400-415 V D 4.8 4.0 4 1465 DOL 10.8 65 85.0 87.1 87.4 0.50 0.63 0.72 0.1167 98
50D 3 x 380-415 V D 4.8 4.0 4 1465 DOL 10.8 65 85.0 87.1 87.4 0.50 0.63 0.72 0.1167 98
51D 3 x 380-415 V D 4.8 4.0 4 1465 Y/D 10.8 65 85.0 87.1 87.4 0.50 0.63 0.72 0.1167 98

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 80 10 20 68 H A 40 4 - 14

67
10
Performance curves and technical data

Performance curves SL1.80.100.55.4.--.C

P H
[kW] [m]
SL1.80.100.55
22 22 50 Hz
QH
20 20 ISO 9906:2012 3B

18 18 Eta
[%]
16 16 80
Eta 2
14 14 70
Eta 1
12 12 60

10 10 50

8 8 40
P1
6 6 NPSH 30
P2 [m]
4 4 8 20

2 2 4 10
NPSH
0 0 0 0
0 5 10 15 20 25 30 35 40 45 50 55 60 Q [l/s]
DN 100

TM04 3458 1314


0 1 2 3 4 5 6 7 v [m/s]
DN 150

0.0 0.5 1.0 1.5 2.0 2.5 3.0 v [m/s]

68
10

Performance curves and technical data


Dimensional sketches SL1.80.100.55.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
755 505 200 319 397 115 DN 100 180 8 x M16 DN 100 180 8 x 18 159.9

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 948 722 536 110 2" 880 397 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
885 389 130 355 300 668 100 19

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51E 3 x 220-240 V D 6.3 5.5 4 1463 Y/D 20.2 141 89.0 89.6 89.1 0.70 0.80 0.85 0.1509 120
50D 3 x 380-415 V D 6.3 5.5 4 1463 DOL 12.0 81 89.0 89.6 89.1 0.70 0.80 0.85 0.1509 120
51D 3 x 380-415 V D 6.3 5.5 4 1463 Y/D 12.0 81 89.0 89.6 89.1 0.70 0.80 0.85 0.1509 120
50B 3 x 400-415 V D 6.3 5.5 4 1463 DOL 12.0 81 89.0 89.6 89.1 0.70 0.80 0.85 0.1509 120

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 80 10 20 IP68 H A 40 4 - 14

69
10
Performance curves and technical data

Performance curves SL1.80.100.75.4.--.C

P H
[kW] [m]
26 26 SL1.80.100.75
50 Hz
QH
24 24 ISO 9906:2012 3B
22 22
20 20
Eta
18 18 [%]
16 16 80
14 14 70
Eta 2
12 12 Eta 1 60
10 10 50
P1
8 8 40
P2
6 6 NPSH 30
[m]
4 4 10 20
2 2 NPSH 5 10
0 0 0 0
0 5 10 15 20 25 30 35 40 45 50 55 60 Q [l/s]
DN 100

TM04 3459 1314


0 1 2 3 4 5 6 7 v [m/s]
DN 150

0.0 0.5 1.0 1.5 2.0 2.5 3.0 v [m/s]

70
10

Performance curves and technical data


Dimensional sketches SL1.80.100.75.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
818 530 217 328 423 116 DN 100 180 8 x M16 DN 100 180 8 x 18 196.5

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 973 747 545 110 2" 942 423 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
948 390 130 355 300 693 100 19

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51E 3 x 220-240 V D 8.4 7.5 4 1463 Y/D 26.7 192 90.7 91.1 90.5 0.68 0.78 0.83 0.2103 177
50B 3 x 400-415 V D 8.4 7.5 4 1463 DOL 16.1 111 90.7 91.1 90.5 0.68 0.78 0.83 0.2103 177
50D 3 x 380-415 V D 8.4 7.5 4 1463 DOL 16.1 111 90.7 91.1 90.5 0.68 0.78 0.83 0.2103 177
51D 3 x 380-415 V D 8.4 7.5 4 1463 Y/D 16.1 111 90.7 91.1 90.5 0.68 0.78 0.83 0.2103 177

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 80 10 20 IP68 H A 40 4 - 14

71
10
Performance curves and technical data

SL1.100.100
Performance curves SL1.100.100.40.4.--.C

P H
[kW] [m]
8.0 16 SL1.100.100.40
7.5 15 50 Hz
ISO 9906:2012 3B Eta
7.0 14 [%]
6.5 13 70
Eta 2
6.0 12 65
QH
5.5 11 60
Eta 1
5.0 10 55
4.5 9 P1 50
4.0 8 45
P2
3.5 7 40
3.0 6 35
2.5 5 30
NPSH
2.0 4 [m] 25
1.5 3 6 20
1.0 2 4 15
0.5 1 NPSH 2 10
0.0 0 0 5
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70Q [l/s]
DN 100

TM04 3524 1314


0 1 2 3 4 5 6 7 8 v [m/s]
DN 150

0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 v [m/s]

72
10

Performance curves and technical data


Dimensional sketches SL1.100.100.40.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
755 541 200 320 438 115 DN 150 240 8 x M20 DN 100 180 8 x 18 149.8

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 984 758 537 110 2" 880 438 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
941 445 186 450 400 704 100 22

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51D 3 x 380-415 V D 4.8 4.0 4 1465 Y/D 10.8 65 85.0 87.1 87.4 0.50 0.63 0.72 0.1127 98
51E 3 x 220-240 V D 4.8 4.0 4 1465 Y/D 17.7 113 85.0 87.1 87.4 0.50 0.63 0.72 0.1127 98
50B 3 x 400-415 V D 4.8 4.0 4 1465 DOL 10.8 65 85.0 87.1 87.4 0.50 0.63 0.72 0.1127 98
50D 3 x 380-415 V D 4.8 4.0 4 1465 DOL 10.8 65 85.0 87.1 87.4 0.50 0.63 0.72 0.1127 98

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 100 10 20 IP68 H A 40 4 - 14

73
10
Performance curves and technical data

Performance curves SL1.100.100.55.4.--.C

P H
[kW] [m]
SL1.100.100.55
18 18 50 Hz Eta
ISO 9906:2012 3B [%]
QH
16 16 80
Eta 2
14 14 70
Eta 1
12 12 60

10 10 50

8 8 40

P1
6 6 NPSH 30
[m]
P2
4 4 4 20

2 2 2 10
NPSH

0 0 0 0
0 10 20 30 40 50 60 70 Q [l/s]
DN 100

TM04 3525 1314


0 2 4 6 8 v [m/s]
DN 150

0 1 2 3 4 v [m/s]

74
10

Performance curves and technical data


Dimensional sketches SL1.100.100.55.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
762 541 200 320 438 115 DN 150 240 8 x M20 DN 100 180 8 x 18 162.9

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 984 758 537 110 2" 887 438 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
948 445 186 450 400 704 100 22

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51E 3 x 220-240 V D 6.3 5.5 4 1463 Y/D 20.2 141 89.0 89.6 89.1 0.70 0.80 0.85 0.1616 120
50D 3 x 380-415 V D 6.3 5.5 4 1463 DOL 12.0 81 89.0 89.6 89.1 0.70 0.80 0.85 0.1616 120
51D 3 x 380-415 V D 6.3 5.5 4 1463 Y/D 12.0 81 89.0 89.6 89.1 0.70 0.80 0.85 0.1616 120
50B 3 x 400-415 V D 6.3 5.5 4 1463 DOL 12.0 81 89.0 89.6 89.1 0.70 0.80 0.85 0.1616 120

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 100 10 20 IP68 H A 40 4 - 14

75
10
Performance curves and technical data

Performance curves SL1.100.100.75.4.--.C

P H
[kW] [m]
SL1.100.100.75
22 22 50 Hz
QH
20 20 ISO 9906:2012 3B

18 18 Eta
[%]
16 16 Eta 2 80

14 14 Eta 1 70

12 12 60

10 10 50
P1
8 8 NPSH 40
[m]
P2
6 6 6 30

4 4 4 20

2 2 NPSH
2 10

0 0 0 0
0 10 20 30 40 50 60 70 80 Q [l/s]
DN 100

TM04 3526 1314


0 2 4 6 8 10 v [m/s]
DN 150

0 1 2 3 4 v [m/s]

76
10

Performance curves and technical data


Dimensional sketches SL1.100.100.75.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
827 541 217 312 462 115 DN 150 240 8 x M20 DN 100 180 8 x 18 195.2

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 984 758 529 110 2" 952 462 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
1013 445 186 450 400 704 100 22

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51E 3 x 220-240 V D 8.4 7.5 4 1463 Y/D 26.7 192 90.7 91.1 90.5 0.68 0.78 0.83 0.2222 177
50B 3 x 400-415 V D 8.4 7.5 4 1463 DOL 16.1 111 90.7 91.1 90.5 0.68 0.78 0.83 0.2222 177
50D 3 x 380-415 V D 8.4 7.5 4 1463 DOL 16.1 111 90.7 91.1 90.5 0.68 0.78 0.83 0.2222 177
51D 3 x 380-415 V D 8.4 7.5 4 1463 Y/D 16.1 111 90.7 91.1 90.5 0.68 0.78 0.83 0.2222 177

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 100 10 20 IP68 H A 40 4 - 14

77
10
Performance curves and technical data

SL1.100.150
Performance curves SL1.100.150.40.4.--.C

P H
[kW] [m]
15 15 SL1.100.150.40
50 Hz
14 14
ISO 9906:2012 3B Eta
13 13 [%]
12 12 70
Eta 2
11 11 QH 65
10 10 60
Eta 1
9 9 55
8 8 50
7 7 45
6 6 40
NPSH
5 5 P1
[m] 35
4 4 4 30
P2
3 3 3 25
2 2 NPSH 2 20
1 1 1 15
0 0 0 10
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70
70QQ [l/s]
80
DN 150

TM04 3527 1314


0 1 2 3 v [m/s]
DN 200

0.0 0.5 1.0 1.5 2.0 v [m/s]

78
10

Performance curves and technical data


Dimensional sketches SL1.100.150.40.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
755 541 200 320 440 111 DN 150 240 8 x M20 DN 150 240 8 x 22 152.9

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


300 110 280 1093 780 559 110 2" 919 440 0 280 450 DN 150 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
941 570 186 450 400 803 150 22

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51E 3 x 220-240 V D 4.8 4.0 4 1465 Y/D 17.7 113 85.0 87.1 87.4 0.50 0.63 0.72 0.1127 98
50B 3 x 400-415 V D 4.8 4.0 4 1465 DOL 10.8 65 85.0 87.1 87.4 0.50 0.63 0.72 0.1127 98
50D 3 x 380-415 V D 4.8 4.0 4 1465 DOL 10.8 65 85.0 87.1 87.4 0.50 0.63 0.72 0.1127 98
51D 3 x 380-415 V D 4.8 4.0 4 1465 Y/D 10.8 65 85.0 87.1 87.4 0.50 0.63 0.72 0.1127 98

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 100 10 20 IP68 H A 40 4 - 14

79
10
Performance curves and technical data

Performance curves SL1.100.150.55.4.--.C

P H
[kW] [m]
SL1.100.150.55
18 18 50 Hz Eta
ISO 9906:2012 3B [%]
16 16 QH 80
Eta 2
14 14 70
Eta 1
12 12 60

10 10 50

8 8 40

P1
6 6 NPSH 30
P2
[m]
4 4 4 20

2 2 2 10
NPSH

0 0 0 0
0 10 20 30 40 50 60 70 Q [l/s]
DN 150

TM04 3528 1314


0 1 2 3 4 v [m/s]
DN 200

0.0 0.5 1.0 1.5 2.0 v [m/s]

80
10

Performance curves and technical data


Dimensional sketches SL1.100.150.55.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
762 541 200 320 440 111 DN 150 240 8 x M20 DN 150 240 8 x 22 166

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


300 110 280 1093 780 559 110 2" 926 440 0 280 450 DN 150 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
948 570 186 450 400 803 150 22

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51E 3 x 220-240 V D 6.3 5.5 4 1463 Y/D 20.2 141 89.0 89.6 89.1 0.70 0.80 0.85 0.1616 120
50D 3 x 380-415 V D 6.3 5.5 4 1463 DOL 12.0 81 89.0 89.6 89.1 0.70 0.80 0.85 0.1616 120
51D 3 x 380-415 V D 6.3 5.5 4 1463 Y/D 12.0 81 89.0 89.6 89.1 0.70 0.80 0.85 0.1616 120
50B 3 x 400-415 V D 6.3 5.5 4 1463 DOL 12.0 81 89.0 89.6 89.1 0.70 0.80 0.85 0.1616 120

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 100 10 20 IP68 H A 40 4 - 14

81
10
Performance curves and technical data

Performance curves SL1.100.150.75.4.--.C

P H
[kW] [m]
SL1.100.150.75
22 22 50 Hz
QH
20 20 ISO 9906:2012 3B

18 18 Eta
[%]
16 16 80
Eta 2
14 14 Eta 1 70

12 12 60

10 10 50

8 8 P1 40

6 6 P2 NPSH 30
[m]
4 4 8 20

2 2 4 10
NPSH
0 0 0 0
0 10 20 30 40 50 60 70 80 Q [l/s]
DN 150

TM04 3529 1314


0 1 2 3 4 v [m/s]
DN 200

0.0 0.5 1.0 1.5 2.0 2.5 v [m/s]

82
10

Performance curves and technical data


Dimensional sketches SL1.100.150.75.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
827 541 217 306 472 111 DN 150 240 8 x M20 DN 150 240 8 x 22 200.1

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


300 110 280 1093 780 545 110 2" 991 472 0 280 450 DN 150 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
1013 570 186 450 400 803 150 22

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51E 3 x 220-240 V D 8.4 7.5 4 1463 Y/D 26.7 192 90.7 91.1 90.5 0.68 0.78 0.83 0.2222 177
50B 3 x 400-415 V D 8.4 7.5 4 1463 DOL 16.1 111 90.7 91.1 90.5 0.68 0.78 0.83 0.2222 177
50D 3 x 380-415 V D 8.4 7.5 4 1463 DOL 16.1 111 90.7 91.1 90.5 0.68 0.78 0.83 0.2222 177
51D 3 x 380-415 V D 8.4 7.5 4 1463 Y/D 16.1 111 90.7 91.1 90.5 0.68 0.78 0.83 0.2222 177

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
S-tube 100 10 20 IP68 H A 40 4 - 14

83
10
Performance curves and technical data

SLV.65.65
Performance curves SLV.65.65.22.2.--.C

P H
[kW] [m]
SLV.65.65.22
9 18 QH 50 Hz
ISO 9906:2012 3B
8 16 Eta
[%]
7 14 35
Eta 2
6 12 30

5 10 25
Eta 1

4 8 20

3 6 P1 15
NPSH
P2 [m]
2 4 4 10

1 2 2 5
NPSH

0 0 0 0
0 2 4 6 8 10 12 14Q [l/s]
DN 65

TM04 3530 1314


0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 v [m/s]
DN 80

0.0 0.5 1.0 1.5 2.0 2.5 v [m/s]

84
10

Performance curves and technical data


Dimensional sketches SLV.65.65.22.2.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
684 396 171 246 321 102 DN 80 160 8 x M16 DN 65 145 4 x 18 64

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


210 95 140 555 544 394 81 1 1/2" 748 321 1 175 266 DN 65 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
812 389 128 330 280 509 65 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50D 3 x 380-415 V Y 2.9 2.2 2 2903 DOL 5.4 35 83.9 85.6 85.1 0.74 0.83 0.88 0.0104 26
50E 3 x 220-240 V D 2.9 2.2 2 2903 DOL 9.2 61 83.9 85.6 85.1 0.74 0.83 0.88 0.0104 26
50B 3 x 400-415 V Y 2.9 2.2 2 2903 DOL 5.4 35 83.9 85.6 85.1 0.74 0.83 0.88 0.0104 26
51D 3 x 380-415 V D 2.9 2.2 2 2903 Y/D 5.4 35 83.9 85.6 85.1 0.74 0.83 0.88 0.0104 26

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
SuperVortex 65 10 20 IP68 H A 40 4 - 14

85
10
Performance curves and technical data

Performance curves SLV.65.65.30.2.--.C

P H
[kW] [m]
SLV.65.65.30
11 22 QH 50 Hz
10 20 ISO 9906:2012 3B

9 18

8 16 Eta
[%]
7 14 35

6 12 30

5 10 25
Eta 2
4 8 Eta 1 20
P1
P2
3 6 NPSH 15
[m]
2 4 4 10

1 2 NPSH
2 5

0 0 0 0
0 2 4 6 8 10 12 14Q [l/s]
DN 65

TM04 3531 1314


0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 v [m/s]
DN 80

0.0 0.5 1.0 1.5 2.0 2.5 v [m/s]

86
10

Performance curves and technical data


Dimensional sketches SLV.65.65.30.2.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
684 396 171 246 321 102 DN 80 160 8 x M16 DN 65 145 4 x 18 92.6

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


210 95 140 555 544 394 81 1 1/2" 748 321 1 175 266 DN 65 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
812 389 128 330 280 509 65 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50D 3 x 380-415 V Y 3.8 3.0 2 2909 DOL 7.4 45 84.0 85.6 85.6 0.67 0.79 0.85 0.0098 65
50E 3 x 220-240 V D 3.8 3.0 2 2909 DOL 11.9 78 84.0 85.6 85.6 0.67 0.79 0.85 0.0098 65
50B 3 x 400-415 V Y 3.8 3.0 2 2909 DOL 7.4 45 84.0 85.6 85.6 0.67 0.79 0.85 0.0098 65
51D 3 x 380-415 V D 3.8 3.0 2 2909 Y/D 7.4 45 84.0 85.6 85.6 0.67 0.79 0.85 0.0098 65

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
SuperVortex 65 10 20 IP68 H A 40 4 - 14

87
10
Performance curves and technical data

Performance curves SLV.65.65.40.2.--.C

P H
[kW] [m]
SLV.65.65.40
18 36 50 Hz Eta
ISO 9906:2012 3B [%]
16 32 40
Eta 2
QH
14 28 35

Eta 1
12 24 30

10 20 25

8 16 20

6 12 NPSH 15
P1
[m]
P2
4 8 8 10

2 4 4 5
NPSH
0 0 0 0
0 2 4 6 8 10 12 14 16 Q [l/s]
DN 65

TM04 3532 1314


0 1 2 3 4 5 v [m/s]
DN 80

0.0 0.5 1.0 1.5 2.0 2.5 3.0 v [m/s]

88
10

Performance curves and technical data


Dimensional sketches SLV.65.65.40.2.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
718 456 200 276 380 106 DN 80 160 8 x M16 DN 65 145 4 x 18 116.5

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


210 95 140 615 604 424 81 1 1/2" 778 380 1 175 266 DN 65 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
846 393 128 330 280 569 65 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51D 3 x 380-415 V D 4.9 4.0 2 2933 Y/D 9.0 86 83.2 85.3 86.2 0.77 0.83 0.88 0.0135 68
51E 3 x 220-240 V D 4.9 4.0 2 2933 Y/D 15.1 149 83.2 85.3 86.2 0.77 0.83 0.88 0.0135 68
50B 3 x 400-415 V D 4.9 4.0 2 2933 DOL 9.0 86 83.2 85.3 86.2 0.77 0.83 0.88 0.0135 68
50D 3 x 380-415 V D 4.9 4.0 2 2933 DOL 9.0 86 83.2 85.3 86.2 0.77 0.83 0.88 0.0135 68

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
SuperVortex 65 10 20 IP68 H A 40 4 - 14

89
10
Performance curves and technical data

SLV.65.80
Performance curves SLV.65.80.22.2.--.C

P H
[kW] [m]
SLV.65.80.22
QH
9 18 50 Hz
ISO 9906:2012 3B
8 16 Eta
[%]
7 14 35
Eta 2
6 12 30

5 10 Eta 1 25

4 8 20

3 6 P1 15
NPSH
P2 [m]
2 4 4 10

1 2 2 5
NPSH

0 0 0 0
0 2 4 6 8 10 12 14Q [l/s]
DN 80

TM04 3533 1314


0.0 0.5 1.0 1.5 2.0 2.5 v [m/s]
DN 100

0.0 0.5 1.0 1.5 v [m/s]

90
10

Performance curves and technical data


Dimensional sketches SLV.65.80.22.2.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
685 397 171 247 321 103 DN 80 160 8 x M16 DN 80 160 8 x 18 65.1

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 579 557 407 81 1 1/2" 782 321 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
813 373 128 330 280 530 80 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50E 3 x 220-240 V D 2.9 2.2 2 2903 DOL 9.2 61 83.9 85.6 85.1 0.74 0.83 0.88 0.0104 26
50D 3 x 380-415 V Y 2.9 2.2 2 2903 DOL 5.4 35 83.9 85.6 85.1 0.74 0.83 0.88 0.0104 26
50B 3 x 400-415 V Y 2.9 2.2 2 2903 DOL 5.4 35 83.9 85.6 85.1 0.74 0.83 0.88 0.0104 26

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
SuperVortex 65 10 20 IP68 H A 40 4 - 14

91
10
Performance curves and technical data

Performance curves SLV.65.80.30.2.--.C

P H
[kW] [m]
SLV.65.80.30
11 22 QH 50 Hz
10 20 ISO 9906:2012 3B

9 18

8 16 Eta
[%]
7 14 35
Eta 2
6 12 30
Eta 1
5 10 25

4 8 P1 20
P2
3 6 NPSH 15
[m]
2 4 4 10

1 2 NPSH
2 5

0 0 0 0
0 2 4 6 8 10 12 14Q [l/s]
DN 80

TM04 3534 1314


0.0 0.5 1.0 1.5 2.0 2.5 v [m/s]
DN 100

0.0 0.5 1.0 1.5 v [m/s]

92
10

Performance curves and technical data


Dimensional sketches SLV.65.80.30.2.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
685 397 171 247 321 103 DN 80 160 8 x M16 DN 80 160 8 x 18 93.7

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 579 557 407 81 1 1/2" 782 321 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
813 405 128 330 280 513 80 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50E 3 x 220-240 V D 3.8 3.0 2 2909 DOL 11.9 78 84.0 85.6 85.6 0.67 0.79 0.85 0.0098 65
50D 3 x 380-415 V Y 3.8 3.0 2 2909 DOL 7.4 45 84.0 85.6 85.6 0.67 0.79 0.85 0.0098 65
50B 3 x 400-415 V Y 3.8 3.0 2 2909 DOL 7.4 45 84.0 85.6 85.6 0.67 0.79 0.85 0.0098 65
51D 3 x 380-415 V D 3.8 3.0 2 2909 Y/D 7.4 45 84.0 85.6 85.6 0.67 0.79 0.85 0.0098 65

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
SuperVortex 65 10 20 IP68 H A 40 4 - 14

93
10
Performance curves and technical data

Performance curves SLV.65.80.40.2.--.C

P H
[kW] [m]
SLV.65.80.40
9 36 50 Hz Eta
ISO 9906:2012 3B [%]
8 32 40
Eta 2
QH
7 28 35
Eta 1
6 24 30

5 20 P1 25
P2
4 16 20

3 12 NPSH 15
[m]
2 8 4 10
NPSH
1 4 2 5

0 0 0 0
0 2 4 6 8 10 12 14 16 Q [l/s]
DN 80

TM04 3535 1314


0.0 0.5 1.0 1.5 2.0 2.5 3.0 v [m/s]
DN 100

0.0 0.5 1.0 1.5 2.0 v [m/s]

94
10

Performance curves and technical data


Dimensional sketches SLV.65.80.40.2.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
718 455 200 276 379 106 DN 80 160 8 x M16 DN 80 160 8 x 18 117

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 637 615 436 81 1 1/2" 812 379 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
846 408 128 330 280 571 80 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51D 3 x 380-415 V D 4.9 4.0 2 2933 Y/D 9.0 86 83.2 85.3 86.2 0.77 0.83 0.88 0.0135 68
51E 3 x 220-240 V D 4.9 4.0 2 2933 Y/D 15.1 149 83.2 85.3 86.2 0.77 0.83 0.88 0.0135 68
50B 3 x 400-415 V D 4.9 4.0 2 2933 DOL 9.0 86 83.2 85.3 86.2 0.77 0.83 0.88 0.0135 68
50D 3 x 380-415 V D 4.9 4.0 2 2933 DOL 9.0 86 83.2 85.3 86.2 0.77 0.83 0.88 0.0135 68

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
SuperVortex 65 10 20 IP68 H A 40 4 - 14

95
10
Performance curves and technical data

SLV.80.80
Performance curves SLV.80.80.11.4.--.C

P H
[kW] [m]
SLV.80.80.11
4.5 9 50 Hz Eta
ISO 9906:2012 3B [%]
4.0 8 40
Eta 2
QH
3.5 7 35

3.0 6 30
Eta 1

2.5 5 25

2.0 4 20

1.5 3 P1 NPSH 15
[m]
P2
1.0 2 4 10

0.5 1 2 5
NPSH

0.0 0 0 0
0 2 4 6 8 10 12 14 16 Q [l/s]
DN 80

TM04 3536 1314


0.0 0.5 1.0 1.5 2.0 2.5 3.0 v [m/s]
DN 100

0.0 0.5 1.0 1.5 2.0 v [m/s]

96
10

Performance curves and technical data


Dimensional sketches SLV.80.80.11.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
711 409 171 241 339 109 DN 80 160 8 x M16 DN 80 160 8 x 18 90.9

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 591 569 401 81 1 1/2" 802 339 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
839 411 128 330 280 525 80 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50E 3 x 220-240 V D 1.4 1.1 4 1452 DOL 5.4 33 80.2 82.8 83.3 0.49 0.62 0.71 0.0166 29
50D 3 x 380-415 V Y 1.4 1.1 4 1452 DOL 3.3 19 80.2 82.8 83.3 0.49 0.62 0.71 0.0166 29
50B 3 x 400-415 V Y 1.4 1.1 4 1452 DOL 3.3 19 80.2 82.8 83.3 0.49 0.62 0.71 0.0166 29

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
SuperVortex 80 10 20 IP68 H A 40 4 - 14

97
10
Performance curves and technical data

Performance curves SLV.80.80.13.4.--.C

P H
[kW] [m]
SLV.80.80.13
5.5 11 50 Hz
5.0 10 ISO 9906:2012 3B Eta
[%]
4.5 9 QH Eta 2 45

4.0 8 40

3.5 7 35
Eta 1
3.0 6 30

2.5 5 25

2.0 4 20
P1
1.5 3 NPSH 15
P2
[m]
1.0 2 4 10

0.5 1 2 5
NPSH
0.0 0 0 0
0 2 4 6 8 10 12 14 16 18 Q [l/s]
DN 80

TM04 3537 1314


0 1 2 3 v [m/s]
DN 100

0.0 0.5 1.0 1.5 2.0 v [m/s]

98
10

Performance curves and technical data


Dimensional sketches SLV.80.80.13.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
711 409 171 241 339 109 DN 80 160 8 x M16 DN 80 160 8 x 18 94.3

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 591 569 401 81 1 1/2" 802 339 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
839 411 128 330 280 525 80 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50D 3 x 380-415 V Y 1.8 1.3 4 1452 DOL 4.3 29 81.1 83.8 84.2 0.45 0.59 0.68 0.035 40
50E 3 x 220-240 V D 1.8 1.3 4 1452 DOL 7.0 49 81.1 83.8 84.2 0.45 0.59 0.68 0.035 40
50B 3 x 400-415 V Y 1.8 1.3 4 1452 DOL 4.3 29 81.1 83.8 84.2 0.45 0.59 0.68 0.035 40

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
SuperVortex 80 10 20 IP68 H A 40 4 - 14

99
10
Performance curves and technical data

Performance curves SLV.80.80.15.4.--.C

P H
[kW] [m]
SLV.80.80.15
5.5 11 50 Hz
5.0 10 QH ISO 9906:2012 3B Eta
[%]
4.5 9 Eta 2 45

4.0 8 40

3.5 7 Eta 1 35

3.0 6 30

2.5 5 25

2.0 4 P1 20

1.5 3 P2 NPSH 15
[m]
1.0 2 4 10

0.5 1 NPSH 2 5

0.0 0 0 0
0 2 4 6 8 10 12 14 16 18 20 Q [l/s]
DN 80

TM04 3538 1314


0 1 2 3 4 v [m/s]
DN 100

0.0 0.5 1.0 1.5 2.0 2.5 v [m/s]

100
10

Performance curves and technical data


Dimensional sketches SLV.80.80.15.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
711 409 171 241 339 109 DN 80 160 8 x M16 DN 80 160 8 x 18 94.6

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 591 569 401 81 1 1/2" 802 339 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
839 411 128 330 280 525 80 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50D 3 x 380-415 V Y 1.9 1.5 4 1452 DOL 4.4 29 81.8 83.9 84.3 0.48 0.61 0.70 0.035 26
50E 3 x 220-240 V D 1.9 1.5 4 1452 DOL 7.3 49 81.8 83.9 84.3 0.48 0.61 0.70 0.035 26
50B 3 x 400-415 V Y 1.9 1.5 4 1452 DOL 4.4 29 81.8 83.9 84.3 0.48 0.61 0.70 0.035 26

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
SuperVortex 80 10 20 IP68 H A 40 4 - 14

101
10
Performance curves and technical data

Performance curves SLV.80.80.22.4.--.C

P H
[kW] [m]
6.5 13 SLV.80.80.22
QH
50 Hz
6.0 12 ISO 9906:2012 3B
Eta
5.5 11 [%]
5.0 10 50
4.5 9 Eta 2 45
4.0 8 40
3.5 7 Eta 1
35
3.0 6 30
P1
2.5 5 25
P2
2.0 4 20
1.5 3 NPSH 15
[m]
1.0 2 4 10
NPSH
0.5 1 2 5
0.0 0 0 0
0 2 4 6 8 10 12 14 16 18 20 Q [l/s]
DN 80

TM04 3539 1314


0 1 2 3 4 v [m/s]
DN 100

0.0 0.5 1.0 1.5 2.0 2.5 v [m/s]

102
10

Performance curves and technical data


Dimensional sketches SLV.80.80.22.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
711 409 171 241 339 109 DN 80 160 8 x M16 DN 80 160 8 x 18 102

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 591 569 401 81 1 1/2" 802 339 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
839 411 128 330 280 525 80 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50D 3 x 380-415 V Y 2.7 2.2 4 1462 DOL 6.0 38 82.9 85.4 85.7 0.52 0.65 0.73 0.0284 41
50E 3 x 220-240 V D 2.7 2.2 4 1462 DOL 9.9 66 82.9 85.4 85.7 0.52 0.65 0.73 0.0284 41
50B 3 x 400-415 V Y 2.7 2.2 4 1462 DOL 6.0 38 82.9 85.4 85.7 0.52 0.65 0.73 0.0284 41
51D 3 x 380-415 V D 2.7 2.2 4 1462 Y/D 6.0 38 82.9 85.4 85.7 0.52 0.65 0.73 0.0284 41

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature rise Max. liquid
pH
Impeller type size pressure starts per hour class class class temperature

[mm] PN [°C]
SuperVortex 80 10 20 IP68 H A 40 4 - 14

103
10
Performance curves and technical data

Performance curves SLV.80.80.40.2.--.C

P H
[kW] [m]
SLV.80.80.40.4
11 22 50 Hz
10 20 ISO 9906:2012 3B Eta
[%]
Eta 2
9 18 45
QH
8 16 Eta 1 40

7 14 35

6 12 30

5 10 25
P1
4 8 P2 NPSH 20
[m]
3 6 6 15

2 4 4 10

1 2 2 5
NPSH
0 0 0 0
0 4 8 12 16 20 24 28Q [l/s]
DN 80

TM04 3540 1314


0 1 2 3 4 5 v [m/s]
DN 100

0.0 0.5 1.0 1.5 2.0 2.5 3.0 v [m/s]

104
10

Performance curves and technical data


Dimensional sketches SLV.80.80.40.2.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
744 456 200 276 380 104 DN 80 160 8 x M16 DN 80 160 8 x 18 121.2

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 638 616 436 81 1 1/2" 840 380 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
872 406 128 330 280 572 80 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51E 3 x 220-240 V D 4.9 4.0 2 2933 Y/D 15.1 149 83.2 85.3 86.2 0.77 0.83 0.88 0.0135 68
50B 3 x 400-415 V D 4.9 4.0 2 2933 DOL 9.0 86 83.2 85.3 86.2 0.77 0.83 0.88 0.0135 68
50D 3 x 380-415 V D 4.9 4.0 2 2933 DOL 9.0 86 83.2 85.3 86.2 0.77 0.83 0.88 0.0135 68
51D 3 x 380-415 V D 4.9 4.0 2 2933 Y/D 9.0 86 83.2 85.3 86.2 0.77 0.83 0.88 0.0135 68

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature rise Max. liquid
pH
Impeller type size pressure starts per hour class class class temperature

[mm] PN [°C]
SuperVortex 80 10 20 IP68 H A 40 4 - 14

105
10
Performance curves and technical data

Performance curves SLV.80.80.40.4.--.C

P H
[kW] [m]
12 24
SLV.80.80.40.2
QH 50 Hz
11 22 ISO 9906:2012 3B
Eta
10 20
[%]
9 18 36

8 16 Eta 2 32

7 14 28
Eta 1
6 12 24
P1
5 10 20
P2
4 8 16

3 6 NPSH 12
[m]
2 4 8 8

1 2 4 4
NPSH
0 0 0 0
0 2 4 6 8 10 12 14 16 18 20 22 Q [l/s]
DN 80

TM04 3541 1314


0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 v [m/s]
DN 100

0.0 0.5 1.0 1.5 2.0 2.5 v [m/s]

106
10

Performance curves and technical data


Dimensional sketches SLV.80.80.40.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
748 460 200 267 393 109 DN 80 160 8 x M16 DN 80 160 8 x 18 133.2

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 642 620 427 81 1 1/2" 839 393 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
876 411 128 330 280 576 80 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51D 3 x 380-415 V D 4.8 4.0 4 1465 Y/D 10.8 65 85.0 87.1 87.4 0.50 0.63 0.72 0.0551 98
51E 3 x 220-240 V D 4.8 4.0 4 1465 Y/D 17.7 113 85.0 87.1 87.4 0.50 0.63 0.72 0.0551 98
50B 3 x 400-415 V D 4.8 4.0 4 1465 DOL 10.8 65 85.0 87.1 87.4 0.50 0.63 0.72 0.0551 98
50D 3 x 380-415 V D 4.8 4.0 4 1465 DOL 10.8 65 85.0 87.1 87.4 0.50 0.63 0.72 0.0551 98

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature rise Max. liquid
pH
Impeller type size pressure starts per hour class class class temperature

[mm] PN [°C]
SuperVortex 80 10 20 IP68 H A 40 4 - 14

107
10
Performance curves and technical data

Performance curves SLV.80.80.60.2.--.C

P H
[kW] [m]
SLV.80.80.60
18 36 50 Hz
ISO 9906:2012 3B
16 32 Eta
[%]
QH
14 28 Eta 2 35

Eta 1
12 24 30

10 20 25

8 16 20
P1
6 12 NPSH 15
P2 [m]
4 8 8 10

NPSH
2 4 4 5

0 0 0 0
0 4 8 12 16 20 24 28Q [l/s]
DN 80

TM04 3542 1314


0 1 2 3 4 5 v [m/s]
DN 100

0.0 0.5 1.0 1.5 2.0 2.5 3.0 v [m/s]

108
10

Performance curves and technical data


Dimensional sketches SLV.80.80.60.2.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
751 456 200 276 380 104 DN 80 160 8 x M16 DN 80 160 8 x 18 137.3

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 638 616 436 81 1 1/2" 847 380 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
879 406 128 330 280 572 80 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51E 3 x 220-240 V D 7.1 6.0 2 2940 Y/D 22.8 203 89.9 90.0 90.1 0.65 0.77 0.83 0.0179 97
50B 3 x 400-415 V D 7.1 6.0 2 2940 DOL 14.6 117 89.9 90.0 90.1 0.65 0.77 0.83 0.0179 97
50D 3 x 380-415 V D 7.1 6.0 2 2940 DOL 14.6 117 89.9 90.0 90.1 0.65 0.77 0.83 0.0179 97
51D 3 x 380-415 V D 7.1 6.0 2 2940 Y/D 14.6 117 89.9 90.0 90.1 0.65 0.77 0.83 0.0179 97

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature rise Max. liquid
pH
Impeller type size pressure starts per hour class class class temperature

[mm] PN [°C]
SuperVortex 80 10 20 IP68 H A 40 4 - 14

109
10
Performance curves and technical data

Performance curves SLV.80.80.75.2.--.C

P H
[kW] [m]
SLV.80.80.75
18 36 50 Hz Eta
QH ISO 9906:2012 3B [%]
16 32 Eta 2 40

14 28 Eta 1 35

12 24 30

10 20 25
P1
8 16 20
P2

6 12 NPSH 15
[m]
4 8 8 10

NPSH
2 4 4 5

0 0 0 0
0 4 8 12 16 20 24 28Q [l/s]
DN 80

TM04 3543 1314


0 1 2 3 4 5 v [m/s]
DN 100

0.0 0.5 1.0 1.5 2.0 2.5 3.0 v [m/s]

110
10

Performance curves and technical data


Dimensional sketches SLV.80.80.75.2.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
751 456 200 276 380 104 DN 80 160 8 x M16 DN 80 160 8 x 18 137.7

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 638 616 436 81 1 1/2" 847 380 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
879 406 128 330 280 572 80 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51D 3 x 380-415 V D 8.8 7.5 2 2923 Y/D 16.3 117 90.0 90.1 89.2 0.72 0.81 0.86 0.0179 97
51E 3 x 220-240 V D 8.8 7.5 2 2923 Y/D 27.6 203 90.0 90.1 89.2 0.72 0.81 0.86 0.0179 97
50B 3 x 400-415 V D 8.8 7.5 2 2923 DOL 16.3 117 90.0 90.1 89.2 0.72 0.81 0.86 0.0179 97
50D 3 x 380-415 V D 8.8 7.5 2 2923 DOL 16.3 117 90.0 90.1 89.2 0.72 0.81 0.86 0.0179 97

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature rise Max. liquid
pH
Impeller type size pressure starts per hour class class class temperature

[mm] PN [°C]
SuperVortex 80 10 20 IP68 H A 40 4 - 14

111
10
Performance curves and technical data

Performance curves SLV.80.80.92.2.--.C

P H
[kW] [m]
SLV.80.80.92
20 40 50 Hz
QH ISO 9906:2012 3B
18 36 Eta
[%]
16 32 Eta 2
40

14 28 Eta 1 35

12 24 30
P1
10 20 P2 25

8 16 20

6 12 NPSH 15
[m]
4 8 8 10
NPSH
2 4 4 5

0 0 0 0
0 4 8 12 16 20 24 28Q [l/s]
DN 80

TM04 3544 1314


0 1 2 3 4 5 v [m/s]
DN 100

0.0 0.5 1.0 1.5 2.0 2.5 3.0 v [m/s]

112
10

Performance curves and technical data


Dimensional sketches SLV.80.80.92.2.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
782 489 217 293 413 123 DN 80 160 8 x M16 DN 80 160 8 x 18 176.8

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 671 649 453 81 1 1/2" 859 413 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
910 425 128 330 280 605 80 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51E 3 x 220-240 V D 10.5 9.2 2 2946 Y/D 33.4 277 89.5 90.8 90.7 0.68 0.80 0.84 0.034 123
50B 3 x 400-415 V D 10.5 9.2 2 2946 DOL 20.5 160 89.5 90.8 90.7 0.68 0.80 0.84 0.034 123
50D 3 x 380-415 V D 10.5 9.2 2 2946 DOL 20.5 160 89.5 90.8 90.7 0.68 0.80 0.84 0.034 123
51D 3 x 380-415 V D 10.5 9.2 2 2946 Y/D 20.5 160 89.5 90.8 90.7 0.68 0.80 0.84 0.034 123

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature rise Max. liquid
pH
Impeller type size pressure starts per hour class class class temperature

[mm] PN [°C]
SuperVortex 80 10 20 IP68 H A 40 4 - 14

113
10
Performance curves and technical data

Performance curves SLV.80.80.110.2.--.C

P H
[kW] [m]
SLV.80.80.110
22 44 QH 50 Hz
20 40 ISO 9906:2012 3B Eta
[%]
18 36 45
Eta 2
16 32 40
Eta 1
14 28 35
P1
12 24 30
P2
10 20 25

8 16 20

6 12 NPSH 15
[m]
4 8 8 10

2 4 NPSH 4 5

0 0 0 0
0 4 8 12 16 20 24 Q [l/s]
DN 80

TM04 3545 1314


0 1 2 3 4 v [m/s]
DN 100

0.0 0.5 1.0 1.5 2.0 2.5 3.0 v [m/s]

114
10

Performance curves and technical data


Dimensional sketches SLV.80.80.110.2.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
782 489 217 293 413 123 DN 80 160 8 x M16 DN 80 160 8 x 18 177.2

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


220 95 160 671 649 453 81 1 1/2" 859 413 13 171 345 DN 80 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
910 425 128 330 280 605 80 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51D 3 x 380-415 V D 12.5 11.0 2 2946 Y/D 23.7 160 90.6 90.9 90.5 0.70 0.80 0.84 0.034 123
51E 3 x 220-240 V D 12.5 11.0 2 2946 Y/D 40.0 277 90.6 90.9 90.5 0.70 0.80 0.84 0.034 123
50B 3 x 400-415 V D 12.5 11.0 2 2946 DOL 23.7 160 90.6 90.9 90.5 0.70 0.80 0.84 0.034 123
50D 3 x 380-415 V D 12.5 11.0 2 2946 DOL 23.7 160 90.6 90.9 90.5 0.70 0.80 0.84 0.034 123

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature rise Max. liquid
pH
Impeller type size pressure starts per hour class class class temperature

[mm] PN [°C]
SuperVortex 80 10 20 IP68 H A 40 4 - 14

115
10
Performance curves and technical data

SLV.80.100
Performance curves SLV.80.100.11.4.--.C

P H
[kW] [m]
SLV.80.100.11
4.0 8 50 Hz
Eta
ISO 9906:2012 3B [%]
3.5 7 40
QH
Eta 2
3.0 6 35

2.5 5 30
Eta 1

2.0 4 25

1.5 3 P1 20
NPSH
P2 [m]
1.0 2 4 15

0.5 1 NPSH
2 10

0.0 0 0 5
0 2 4 6 8 10 12 14 16 Q [l/s]
DN 100

TM04 3550 1314


0.0 0.5 1.0 1.5 2.0 v [m/s]
DN 150

0.0 0.2 0.4 0.6 0.8 v [m/s]

116
10

Performance curves and technical data


Dimensional sketches SLV.80.100.11.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
711 407 171 241 337 109 DN 80 160 8 x M16 DN 100 180 8 x 18 89.1

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 850 624 458 110 2" 842 337 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
839 381 128 330 280 570 100 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50D 3 x 380-415 V Y 1.4 1.1 4 1452 DOL 3.3 19 80.2 82.8 83.3 0.49 0.62 0.71 0.016 29
50E 3 x 220-240 V D 1.4 1.1 4 1452 DOL 5.4 33 80.2 82.8 83.3 0.49 0.62 0.71 0.016 29
50B 3 x 400-415 V Y 1.4 1.1 4 1452 DOL 3.3 19 80.2 82.8 83.3 0.49 0.62 0.71 0.016 29

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature rise Max. liquid
pH
Impeller type size pressure starts per hour class class class temperature

[mm] PN [°C]
SuperVortex 80 10 20 IP68 H A 40 4 - 14

117
10
Performance curves and technical data

Performance curves SLV.80.100.13.4.--.C

P H
[kW] [m]
QH SLV.80.100.13
4.0 8 50 Hz
Eta
ISO 9906:2012 3B [%]
3.5 7 50
Eta 2
3.0 6 45

2.5 5 40
Eta 1
2.0 4 35

P1
1.5 3 30
NPSH
P2
[m]
1.0 2 4 25

NPSH
0.5 1 2 20

0.0 0 0 15
0 2 4 6 8 10 12 14 16 18 Q [l/s]
DN 100

TM04 3551 1314


0.0 0.5 1.0 1.5 2.0 v [m/s]
DN 150

0.0 0.2 0.4 0.6 0.8 1.0 v [m/s]

118
10

Performance curves and technical data


Dimensional sketches SLV.80.100.13.4.--.C

TM04 2793 3008 - TM04 2794 3008 -TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
711 407 171 241 337 109 DN 80 160 8 x M16 DN 100 180 8 x 18 92.5

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 850 624 458 110 2" 842 337 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
839 381 128 330 280 570 100 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50E 3 x 220-240 V D 1.8 1.3 4 1452 DOL 7.0 49 81.1 83.8 84.2 0.45 0.59 0.68 0.0215 40
50D 3 x 380-415 V Y 1.8 1.3 4 1452 DOL 4.3 29 81.1 83.8 84.2 0.45 0.59 0.68 0.0215 40
50B 3 x 400-415 V Y 1.8 1.3 4 1452 DOL 4.3 29 81.1 83.8 84.2 0.45 0.59 0.68 0.0215 40

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature rise Max. liquid
pH
Impeller type size pressure starts per hour class class class temperature

[mm] PN [°C]
SuperVortex 80 10 20 IP68 H A 40 4 - 14

119
10
Performance curves and technical data

Performance curves SLV.80.100.15.4.--.C

P H
[kW] [m]
SLV.80.100.15
5.0 10 50 Hz
QH
ISO 9906:2012 3B
4.5 9 Eta
[%]
4.0 8 Eta 2 50

3.5 7 45

3.0 6 40
Eta 1
2.5 5 35

2.0 4 30
P1

1.5 3 P2 NPSH 25
[m]
1.0 2 4 20
NPSH
0.5 1 2 15

0.0 0 0 10
0 2 4 6 8 10 12 14 16 18 20 Q [l/s]
DN 100

TM04 3552 1314


0.0 0.5 1.0 1.5 2.0 2.5 v [m/s]
DN 150

0.0 0.2 0.4 0.6 0.8 1.0 v [m/s]

120
10

Performance curves and technical data


Dimensional sketches SLV.80.100.15.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
711 407 171 241 337 109 DN 80 160 8 x M16 DN 100 180 8 x 18 92.8

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 850 624 458 110 2" 842 337 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
839 381 128 330 280 570 100 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50E 3 x 220-240 V D 1.9 1.5 4 1452 DOL 7.3 49 81.8 83.9 84.3 0.48 0.61 0.70 0.0215 40
50D 3 x 380-415 V Y 1.9 1.5 4 1452 DOL 4.4 29 81.8 83.9 84.3 0.48 0.61 0.70 0.0215 40
50B 3 x 400-415 V Y 1.9 1.5 4 1452 DOL 4.4 29 81.8 83.9 84.3 0.48 0.61 0.70 0.0215 40

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature rise Max. liquid
pH
Impeller type size pressure starts per hour class class class temperature

[mm] PN [°C]
SuperVortex 80 10 20 IP68 H A 40 4 - 14

121
10
Performance curves and technical data

Performance curves SLV.80.100.22.4.--.C

P H
[kW] [m] QH
6.0 12
SLV.80.100.22
50 Hz
Eta
5.5 11 ISO 9906:2012 3B
[%]
5.0 10 50
Eta 2
4.5 9 45

4.0 8 40
Eta 1
3.5 7 35

3.0 6 30
P1
2.5 5 25
P2
2.0 4 20

1.5 3 NPSH 15
[m]
1.0 2 4 10
NPSH
0.5 1 2 5

0.0 0 0 0
0 2 4 6 8 10 12 14 16 18 20 22 24 Q [l/s]
DN 100

TM04 3553 1314


0.0 0.5 1.0 1.5 2.0 2.5 3.0 v [m/s]
DN 150

0.0 0.2 0.4 0.6 0.8 1.0 1.2 v [m/s]

122
10

Performance curves and technical data


Dimensional sketches SLV.80.100.22.4.--.C

TM04 2793 3008 -TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
711 407 171 241 337 109 DN 80 160 8 x M16 DN 100 180 8 x 18 100.2

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 850 624 458 110 2" 842 337 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
839 381 128 330 280 570 100 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50E 3 x 220-240 V D 2.7 2.2 4 1462 DOL 9.9 66 82.9 85.4 85.7 0.52 0.65 0.73 0.0284 41
50D 3 x 380-415 V Y 2.7 2.2 4 1462 DOL 6.0 38 82.9 85.4 85.7 0.52 0.65 0.73 0.0284 41
50B 3 x 400-415 V Y 2.7 2.2 4 1462 DOL 6.0 38 82.9 85.4 85.7 0.52 0.65 0.73 0.0284 41
51D 3 x 380-415 V D 2.7 2.2 4 1462 Y/D 6.0 38 82.9 85.4 85.7 0.52 0.65 0.73 0.0284 41

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature rise Max. liquid
pH
Impeller type size pressure starts per hour class class class temperature

[mm] PN [°C]
SuperVortex 80 10 20 IP68 H A 40 4 - 14

123
10
Performance curves and technical data

Performance curves SLV.80.100.40.2.--.C

P H
[kW] [m]
SLV.80.100.40.4
10 20 50 Hz
ISO 9906:2012 3B
9 18 Eta
QH [%]
8 16 Eta 2 50

7 14 45
Eta 1
6 12 40

5 10 35
P1
4 8 30
P2
3 6 NPSH 25
[m]
2 4 4 20

1 2 NPSH 2 15

0 0 0 10
0 4 8 12 16 20 24 28Q [l/s]
DN 100

TM04 3554 1314


0 1 2 3 v [m/s]
DN 150

0.0 0.5 1.0 1.5 v [m/s]

124
10

Performance curves and technical data


Dimensional sketches SLV.80.100.40.2.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
744 466 200 286 380 104 DN 80 160 8 x M16 DN 100 180 8 x 18 123.3

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 909 683 503 110 2" 880 380 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
872 376 128 330 280 629 100 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51E 3 x 220-240 V D 4.9 4.0 2 2933 Y/D 15.1 149 83.2 85.3 86.2 0.77 0.83 0.88 0.0138 68
50B 3 x 400-415 V D 4.9 4.0 2 2933 DOL 9.0 86 83.2 85.3 86.2 0.77 0.83 0.88 0.0138 68
50D 3 x 380-415 V D 4.9 4.0 2 2933 DOL 9.0 86 83.2 85.3 86.2 0.77 0.83 0.88 0.0138 68
51D 3 x 380-415 V D 4.9 4.0 2 2933 Y/D 9.0 86 83.2 85.3 86.2 0.77 0.83 0.88 0.0138 68

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature rise Max. liquid
pH
Impeller type size pressure starts per hour class class class temperature

[mm] PN [°C]
SuperVortex 80 10 20 IP68 H A 40 4 - 14

125
10
Performance curves and technical data

Performance curves SLV.80.100.40.4.--.C

P H
[kW] [m]
QH SLV.80.100.40.2
10 20 50 Hz
ISO 9906:2012 3B
9 18 Eta
[%]
8 16 40

7 14 Eta 2 35

6 12 30
Eta 1
5 10 P1 25
P2
4 8 NPSH 20
[m]
3 6 6 15

2 4 4 10
NPSH
1 2 2 5

0 0 0 0
0 4 8 12 16 20 24 Q [l/s]
DN 100

TM04 3555 1314


0 1 2 3 v [m/s]
DN 150

0.0 0.5 1.0 v [m/s]

126
10

Performance curves and technical data


Dimensional sketches SLV.80.100.40.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
748 458 200 267 391 109 DN 80 160 8 x M16 DN 100 180 8 x 18 130.8

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 901 675 484 110 2" 879 391 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
876 381 128 330 280 621 100 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51E 3 x 220-240 V D 4.8 4.0 4 1465 Y/D 17.7 113 85.0 87.1 87.4 0.50 0.63 0.72 0.0586 98
50B 3 x 400-415 V D 4.8 4.0 4 1465 DOL 10.8 65 85.0 87.1 87.4 0.50 0.63 0.72 0.0586 98
50D 3 x 380-415 V D 4.8 4.0 4 1465 DOL 10.8 65 85.0 87.1 87.4 0.50 0.63 0.72 0.0586 98
51D 3 x 380-415 V D 4.8 4.0 4 1465 Y/D 10.8 65 85.0 87.1 87.4 0.50 0.63 0.72 0.0586 98

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature rise Max. liquid
pH
Impeller type size pressure starts per hour class class class temperature

[mm] PN [°C]
SuperVortex 80 10 20 IP68 H A 40 4 - 14

127
10
Performance curves and technical data

Performance curves SLV.80.100.60.2.--.C

P H
[kW] [m]
SLV.80.100.60
50 Hz
14 28
ISO 9906:2012 3B Eta
QH [%]
12 24 40
Eta 2

10 20 35
Eta 1
8 16 30

P1
6 12 25
P2 NPSH
[m]
4 8 8 20

2 4 4 15
NPSH

0 0 0 10
0 4 8 12 16 20 24 28Q [l/s]
DN 100

TM04 3556 1314


0 1 2 3 v [m/s]
DN 150

0.0 0.5 1.0 1.5 v [m/s]

128
10

Performance curves and technical data


Dimensional sketches SLV.80.100.60.2.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
751 466 200 286 380 104 DN 80 160 8 x M16 DN 100 180 8 x 18 139.4

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 909 683 503 110 2" 887 380 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
879 376 128 330 280 629 100 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51E 3 x 220-240 V D 7.1 6.0 2 2940 Y/D 22.8 203 89.9 90.0 90.1 0.65 0.77 0.83 0.0204 97
50B 3 x 400-415 V D 7.1 6.0 2 2940 DOL 14.6 117 89.9 90.0 90.1 0.65 0.77 0.83 0.0204 97
50D 3 x 380-415 V D 7.1 6.0 2 2940 DOL 14.6 117 89.9 90.0 90.1 0.65 0.77 0.83 0.0204 97
51D 3 x 380-415 V D 7.1 6.0 2 2940 Y/D 14.6 117 89.9 90.0 90.1 0.65 0.77 0.83 0.0204 97

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature rise Max. liquid
pH
Impeller type size pressure starts per hour class class class temperature

[mm] PN [°C]
SuperVortex 80 10 20 IP68 H A 40 4 - 14

129
10
Performance curves and technical data

Performance curves SLV.80.100.75.2.--.C

P H
[kW] [m]
SLV.80.100.75
QH
16 32 50 Hz
Eta
ISO 9906:2012 3B [%]
14 28 Eta 2
40

12 24 35
Eta 1

10 20 30

P1
8 16 25
P2 NPSH
[m]
6 12 6 20

4 8 4 15
NPSH

2 4 2 10

0 0 0 5
0 4 8 12 16 20 24 28 32 Q [l/s]
DN 100

TM04 3557 1314


0 1 2 3 4 v [m/s]
DN 150

0.0 0.5 1.0 1.5 v [m/s]

130
10

Performance curves and technical data


Dimensional sketches SLV.80.100.75.2.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
751 466 200 286 380 104 DN 80 160 8 x M16 DN 100 180 8 x 18 139.8

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 909 683 503 110 2" 887 380 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
879 376 128 330 280 629 100 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51E 3 x 220-240 V D 8.8 7.5 2 2923 Y/D 27.6 203 90.0 90.1 89.2 0.72 0.81 0.86 0.0204 97
50B 3 x 400-415 V D 8.8 7.5 2 2923 DOL 16.3 117 90.0 90.1 89.2 0.72 0.81 0.86 0.0204 97
50D 3 x 380-415 V D 8.8 7.5 2 2923 DOL 16.3 117 90.0 90.1 89.2 0.72 0.81 0.86 0.0204 97
51D 3 x 380-415 V D 8.8 7.5 2 2923 Y/D 16.3 117 90.0 90.1 89.2 0.72 0.81 0.86 0.0204 97

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature rise Max. liquid
pH
Impeller type size pressure starts per hour class class class temperature

[mm] PN [°C]
SuperVortex 80 10 20 IP68 H A 40 4 - 14

131
10
Performance curves and technical data

Performance curves SLV.80.100.92.2.--.C

P H
[kW] [m]
SLV.80.100.92
18 36 QH 50 Hz
ISO 9906:2012 3B
16 32 Eta
[%]
14 28 Eta 2 40

12 24 Eta 1 35

10 20 P1
30

P2
8 16 NPSH 25
[m]
6 12 6 20

4 8 NPSH 4 15

2 4 2 10

0 0 0 5
0 4 8 12 16 20 24 28 32 Q [l/s]
DN 100

TM04 3558 1314


0 1 2 3 4 v [m/s]
DN 150

0.0 0.5 1.0 1.5 v [m/s]

132
10

Performance curves and technical data


Dimensional sketches SLV.80.100.92.2.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
782 499 217 303 413 123 DN 80 160 8 x M16 DN 100 180 8 x 18 176.3

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 942 716 520 110 2" 899 413 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
910 395 128 330 280 662 100 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51E 3 x 220-240 V D 10.5 9.2 2 2946 Y/D 33.4 277 89.5 90.8 90.7 0.68 0.80 0.84 0.038 123
50B 3 x 400-415 V D 10.5 9.2 2 2946 DOL 20.5 160 89.5 90.8 90.7 0.68 0.80 0.84 0.038 123
50D 3 x 380-415 V D 10.5 9.2 2 2946 DOL 20.5 160 89.5 90.8 90.7 0.68 0.80 0.84 0.038 123
51D 3 x 380-415 V D 10.5 9.2 2 2946 Y/D 20.5 160 89.5 90.8 90.7 0.68 0.80 0.84 0.038 123

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature rise Max. liquid
pH
Impeller type size pressure starts per hour class class class temperature

[mm] PN [°C]
SuperVortex 80 10 20 IP68 H A 40 4 - 14

133
10
Performance curves and technical data

Performance curves SLV.80.100.110.2.--.C

P H
[kW] [m] QH
SLV.80.100.110
22 40 50 Hz
ISO 9906:2012 3B
20 36 Eta
[%]
18 32 45
Eta 2
16 28 40
Eta 1
14 24 35
P1
12 20 30
P2
10 16 NPSH 25
[m]
8 12 6 20

6 8 4 15
NPSH

4 4 2 10

2 0 0 5
0 4 8 12 16 20 24 28 32 36 Q [l/s]
DN 100

TM04 3559 1314


0 1 2 3 4 v [m/s]
DN 150

0.0 0.5 1.0 1.5 2.0 v [m/s]

134
10

Performance curves and technical data


Dimensional sketches SLV.80.100.110.2.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
782 499 217 303 413 123 DN 80 160 8 x M16 DN 100 180 8 x 18 176.7

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 942 716 520 110 2" 899 413 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
910 395 128 330 280 662 100 18

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51E 3 x 220-240 V D 12.5 11.0 2 2946 Y/D 40.0 277 90.6 90.9 90.5 0.70 0.80 0.84 0.038 123
50B 3 x 400-415 V D 12.5 11.0 2 2946 DOL 23.7 160 90.6 90.9 90.5 0.70 0.80 0.84 0.038 123
50D 3 x 380-415 V D 12.5 11.0 2 2946 DOL 23.7 160 90.6 90.9 90.5 0.70 0.80 0.84 0.038 123
51D 3 x 380-415 V D 12.5 11.0 2 2946 Y/D 23.7 160 90.6 90.9 90.5 0.70 0.80 0.84 0.038 123

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature rise Max. liquid
pH
Impeller type size pressure starts per hour class class class temperature

[mm] PN [°C]
SuperVortex 80 10 20 IP68 H A 40 4 - 14

135
10
Performance curves and technical data

SLV.100.100
Performance curves SLV.100.100.30.4.--.C

P H
[kW] [m] QH
SLV.100.100.30
11 11 50 Hz
10 10 ISO 9906:2012 3B Eta
[%]
9 9 45

8 8 40
Eta 2
7 7 35
Eta 1
6 6 30

5 5 25

4 4 20
P1
3 3 P2 NPSH 15
[m]
2 2 4 10

1 1 NPSH 2 5

0 0 0 0
0 4 8 12 16 20 24 28 32 Q [l/s]
DN 100

TM04 3546 1314


0 1 2 3 4 v [m/s]
DN 150

0.0 0.5 1.0 1.5 v [m/s]

136
10

Performance curves and technical data


Dimensional sketches SLV.100.100.30.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
737 457 200 277 380 134 DN 100 180 8 x M16 DN 100 180 8 x 18 113.2

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 900 674 494 110 2" 843 380 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
867 408 130 355 300 620 100 19

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
50E 3 x 220-240 V D 3.7 3.0 4 1453 DOL 12.8 78 83.6 85.6 85.7 0.57 0.69 0.77 0.0527 64
50D 3 x 380-415 V Y 3.7 3.0 4 1453 DOL 8.5 45 83.6 85.6 85.7 0.57 0.69 0.77 0.0527 64
50B 3 x 400-415 V Y 3.7 3.0 4 1453 DOL 8.5 45 83.6 85.6 85.7 0.57 0.69 0.77 0.0527 64
51D 3 x 380-415 V D 3.7 3.0 4 1453 Y/D 8.5 45 83.6 85.6 85.7 0.57 0.69 0.77 0.0527 64

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature rise Max. liquid
pH
Impeller type size pressure starts per hour class class class temperature

[mm] PN [°C]
SuperVortex 100 10 20 IP68 H A 40 4 - 14

137
10
Performance curves and technical data

Performance curves SLV.100.100.40.4.--.C

P H
[kW] [m] QH
14 14 SLV.100.100.40
50 Hz
13 13
ISO 9906:2012 3B
12 12
11 11
Eta
10 10 [%]
9 9 45
8 8 Eta 2 40
7 7 35
Eta 1
6 6 30
5 5 25
P1
4 4 P2
20
3 3 NPSH 15
[m]
2 2 4 10
1 1 NPSH 2 5
0 0 0 0
0 4 8 12 16 20 24 28 32 Q [l/s]
DN 100

TM04 3547 1314


0 1 2 3 4 v [m/s]
DN 150

0.0 0.5 1.0 1.5 v [m/s]

138
10

Performance curves and technical data


Dimensional sketches SLV.100.100.40.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
759 457 200 277 380 134 DN 100 180 8 x M16 DN 100 180 8 x 18 128.5

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 900 674 494 110 2" 865 380 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
889 408 130 355 300 620 100 19

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51E 3 x 220-240 V D 4.8 4.0 4 1465 Y/D 17.7 113 85.0 87.1 87.4 0.50 0.63 0.72 0.0551 98
50B 3 x 400-415 V D 4.8 4.0 4 1465 DOL 10.8 65 85.0 87.1 87.4 0.50 0.63 0.72 0.0551 98
50D 3 x 380-415 V D 4.8 4.0 4 1465 DOL 10.8 65 85.0 87.1 87.4 0.50 0.63 0.72 0.0551 98
51D 3 x 380-415 V D 4.8 4.0 4 1465 Y/D 10.8 65 85.0 87.1 87.4 0.50 0.63 0.72 0.0551 98

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature rise Max. liquid
pH
Impeller type size pressure starts per hour class class class temperature

[mm] PN [°C]
SuperVortex 100 10 20 IP68 H A 40 4 - 14

139
10
Performance curves and technical data

Performance curves SLV.100.100.55.4.--.C

P H
[kW] [m]
SLV.100.100.55 Eta
11 22 50 Hz [%]
10 20 ISO 9906:2012 3B 50
Eta 2
9 18 QH 45
Eta 1
8 16 40

7 14 35
P1
6 12 30
P2
5 10 25

4 8 20

3 6 NPSH 15
[m]
2 4 4 10

1 2 2 5
NPSH
0 0 0 0
0 4 8 12 16 20 24 28 32 36 Q [l/s]
DN 100

TM04 3548 1314


0 1 2 3 4 v [m/s]
DN 150

0.0 0.5 1.0 1.5 2.0 v [m/s]

140
10

Performance curves and technical data


Dimensional sketches SLV.100.100.55.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
766 457 200 277 380 134 DN 100 180 8 x M16 DN 100 180 8 x 18 138.8

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 900 674 494 110 2" 872 380 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
896 408 130 355 300 620 100 19

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51E 3 x 220-240 V D 6.3 5.5 4 1463 Y/D 20.2 141 89.0 89.6 89.1 0.70 0.80 0.85 0.0625 120
50D 3 x 380-415 V D 6.3 5.5 4 1463 DOL 12.0 81 89.0 89.6 89.1 0.70 0.80 0.85 0.0625 120
51D 3 x 380-415 V D 6.3 5.5 4 1463 Y/D 12.0 81 89.0 89.6 89.1 0.70 0.80 0.85 0.0625 120
50B 3 x 400-415 V D 6.3 5.5 4 1463 DOL 12.0 81 89.0 89.6 89.1 0.70 0.80 0.85 0.0625 120

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature rise Max. liquid
pH
Impeller type size pressure starts per hour class class class temperature

[mm] PN [°C]
SuperVortex 100 10 20 IP68 H A 40 4 - 14

141
10
Performance curves and technical data

Performance curves SLV.100.100.75.4.--.C

P H
[kW] [m]
24 24
SLV.100.100.75
50 Hz
Eta
22 22 ISO 9906:2012 3B
[%]
20 20 Eta 2 50
QH

18 18 Eta 1 45

16 16 40

14 14 35

12 12 30

10 10 25
P1
8 8 20
P2
6 6 NPSH 15
[m]
4 4 8 10

2 2 4 5
NPSH
0 0 0 0
0 5 10 15 20 25 30 35 40 Q [l/s]
DN 100

TM04 3549 1314


0 1 2 3 4 5 v [m/s]
DN 150

0.0 0.5 1.0 1.5 2.0 v [m/s]

142
10

Performance curves and technical data


Dimensional sketches SLV.100.100.75.4.--.C

TM04 2793 3008 - TM04 2794 3008 - TM04 2795 3008


A C D E F H DN1 Dc1 D∅1 D1n DN2 Dc2 D∅2 D2n Weight [kg]
842 490 217 294 413 145 DN 100 180 8 x M16 DN 100 180 8 x 18 169.6

Z2 Z3 Z4 Z6 Z7 Z8 Z9 Z10 Z11 Z12a Z14 Z15 Z16 ZDN1 ZM


260 110 220 933 707 511 110 2" 937 413 0 220 413 DN 100 4 x M16

V1 V2 V3 V4 V5 V6 V7 V∅
972 419 130 355 300 653 100 19

Electrical data
IN Istart η motor [%] Cos  Moment Breakdown
Voltage Voltage P1 P2 No. of Starting
Rpm of inertia torque Mmax
code [V] [kW] [kW] poles method [A] [A] 1/2 3/4 1/1 1/2 3/4 1/1 [kgm 2] [Nm]
51D 3 x 380-415 V D 8.4 7.5 4 1463 Y/D 16.1 111 90.7 91.1 90.5 0.68 0.78 0.83 0.0924 177
51E 3 x 220-240 V D 8.4 7.5 4 1463 Y/D 26.7 192 90.7 91.1 90.5 0.68 0.78 0.83 0.0924 177
50B 3 x 400-415 V D 8.4 7.5 4 1463 DOL 16.1 111 90.7 91.1 90.5 0.68 0.78 0.83 0.0924 177
50D 3 x 380-415 V D 8.4 7.5 4 1463 DOL 16.1 111 90.7 91.1 90.5 0.68 0.78 0.83 0.0924 177

Pump data
Max. solids Pump housing Max. number of Enclosure Insulation Temperature Max. liquid
pH
Impeller type size pressure starts per hour class class rise class temperature

[mm] PN [°C]
SuperVortex 100 10 20 IP68 H A 40 4 - 14

143
SL1, SLV pumps
11

11. Accessories
Accessories

Installation systems

SLV.100.100
SL1.100.100

SL1.100.150

SLV.80.100
SL1.80.100

SLV.65.65

SLV.65.80

SLV.80.80
SL1.50.65

SL1.50.80

SL1.80.80
Product
Picture Description Dimensions
number

Complete auto-coupling DN 65 ● ● 96090992


system, including guide claw,
DN 80 ● ● ● ● 96090993
base plate and upper guide
rail bracket. Cast iron, DN 80 / DN 65 ● ● 96102238
epoxy-coated. With bolts, nuts
and gaskets. Note: If your DN 100 ● ● ● ● 96090994
TM04 4490 1409

guide rails exceed 4 m,


please consider the use of DN 100 / DN 80 ● ● ● ● 96102240
intermediate guide rail
DN 150 ● 96090995
brackets to support your
system. DN 150 / DN 100 ● ● ● ● 96102241

DN 65/80 / guiderail 1 1/2" 97904180

DN 100/150 guiderail 1 1/2" 97904181


TM06 0755 0814

Upper guide rail brackets of


stainless steel
(EN/DIN 1.4408)
DN 150/125 / guiderail 3" 97904182

DN 65 / 2 1/2" ● ● 96825119

DN 80 / 3" ● ● ● ● 96825142
TM05 4253 2112

Intermediate guide rail


brackets of stainless steel DN 100 / 4" ● ● ● ● 96825161
(EN/DIN 1.4308/AISI 304)
DN 150 / 6" ● 96887674

DN 65 / DN 65 / 2 1/2" ● 96102253

DN 65 / DN 80 / 3" ● 96102378

DN 80 / DN 65 / 2 1/2" ● 96102439

Ring stand with flanged 90 ° DN 80 / DN 80 / 3" ● ● 96102254


elbow and hose connection.
DN 80 / DN 100 / 4" ● 96943236
Cast iron, epoxy-coated.
With bolts, nuts, gaskets and DN 100 / DN 80 / 3" ● 96102313
anchor bolts.
DN 100 / DN 100 / 4" ● ● 96102255
DN 150 / DN 100 / 4",
● 96102314
galvanised steel
DN 150 / DN 150 / 6",
● 96102256
galvanised steel
DN 65 / DN 65 / R 2 1/2 ● 96102379

DN 65 / DN 80 / R 3 ● 96102380

DN 80 / DN 65 / R 2 1/2" ● 96102440
Ring stand with flanged 90 ° DN 80 / DN 80 / R 3 ● ● 96102381
elbow and outside thread
connection. Cast iron, DN 80/DN 100/R 4 ● 96943237
epoxy-coated. With bolts,
nuts, gaskets and anchor DN 100 / DN 80 / R 3 ● 96102382
bolts.
TM04 6086 4809

DN 100 / DN 100 / R 4 ● ● 96102383


DN 150 / DN 100 / R 4,
● 96102384
galvanised steel
DN 150/DN 150/R 6,
● 96102385
galvanised steel

144
SL1, SLV pumps
11
Other accessories

Accessories
SLV.100.100
SL1.100.100

SL1.100.150
SL1.80.100

SLV.65.65

SLV.65.80

SLV.80.80
SL1.50.65

SL1.50.80

SL1.80.80
Max. load Product
Picture Description
[kg] number

2 m hot dip galvanised lifting chain with lifting link


● ● ● ● ● ● ● ● ● ● 98540141
and safety hook. With certificates.
3 m hot dip galvanised lifting chain with lifting link
● ● ● ● ● ● ● ● ● ● 98595457
and safety hook. With certificates.
4 m hot dip galvanised lifting chain with lifting link
● ● ● ● ● ● ● ● ● ● 98595458
and safety hook. With certificates.
500
6 m hot dip galvanised lifting chain with lifting link
● ● ● ● ● ● ● ● ● ● 98595459
and safety hook. With certificates.
8 m hot dip galvanised lifting chain with lifting link
● ● ● ● ● ● ● ● ● ● 98595460
and safety hook. With certificates.
10 m hot dip galvanised lifting chain with lifting
● ● ● ● ● ● ● ● ● ● 98595471
link and safety hook. With certificates.
2 m stainless steel lifting chain (according to
EN/DIN 1.4401) with lifting link and safety hook. ● ● ● ● ● ● ● ● ● ● 98540142
With certificates
3 m stainless steel lifting chain (according to
EN/DIN 1.4401) with lifting link and safety hook. ● ● ● ● ● ● ● ● ● ● 98595472
With certificates.
4 m stainless steel lifting chain (according to
EN/DIN 1.4401) with lifting link and safety hook. ● ● ● ● ● ● ● ● ● ● 98595474
With certificates.
500
6 m stainless steel lifting chain (according to
EN/DIN 1.4401) with lifting link and safety hook. ● ● ● ● ● ● ● ● ● ● 98595475
With certificates.
8 m stainless steel lifting chain (according to
TM02 6126 5102

EN/DIN 1.4401) with lifting link and safety hook. ● ● ● ● ● ● ● ● ● ● 98595476


With certificates.
10 m stainless steel lifting chain (according to
EN/DIN 1.4401) with lifting link and safety hook. ● ● ● ● ● ● ● ● ● ● 98595478
With certificates.

145
SL1, SLV pumps
11
Level controllers The DC control cabinets can be fitted with various
Accessories

units:
Grundfos offers a wide range of pump controllers to
• The CU 362 control unit, which is the "brain" of the
keep a watchful eye on liquid levels in the wastewater
Dedicated Controls system, is fitted in the cabinet
collecting tank, ensuring correct operation and
front. The CU 362 can be fitted with one of the
protection of the pumps.
Grundfos CIM communication modules mentioned
Controller ranges: below, depending on the monitoring needs or the
• Dedicated Controls, DC SCADA system:
• LC and LCD level controllers – The CIM 200 is a Grundfos communication
The LC is designed for one-pump installations, and the module used for the Modbus RTU fieldbus
LCD is designed for two-pump installations. protocol.
The DC is designed for one- to six-pump installations. – The CIM 250 is a communication module used for
GSM/GPRS communication. The CIM 250
Dedicated Controls establishes communication between the CU 362
and a SCADA system, thereby allowing the
application to be monitored and controlled
remotely. This module also offers SMS
messaging, for example status and alarm
messages.
– The CIM 270 is a communication module for the
Grundfos Remote Management system (GRM).
The CIM 270 establishes communication between
the CU 362 and the GRM, thereby allowing the
application to be monitored and controlled
remotely.
• The IO 351B module, which is a general I/O module.
The IO 351B communicates with the CU 362 via
GENIbus.
• The MP 204 motor protector (optional), which
provides many electrical status values, for example
voltage, current, power, insulation resistance and
TM06 0918 1214

energy. The MP 204 offers better protection of the


pumps than a conventional motor protection device.
• The CUE/VFD (optional), which is either a Grundfos
variable-frequency converter or a general
Fig. 24 Dedicated Controls control cabinet variable-frequency converter, also offers better
pump protection and a more steady flow through the
Grundfos Dedicated Controls is a control system that pit pipes, so the pumps are treated well and the
can control and monitor one to six Grundfos energy consumption is kept at a minimum.
wastewater pumps and a mixer or a flushing valve. For further information, see the comparison of
Dedicated Controls are used in installations requiring Dedicated Controls (DC) and the LC and LCD level
advanced control and data communication. controllers on page 148 or the technical documentation
The main components of the Dedicated Controls for Dedicated Controls on www.grundfos.com
system are: (WebCAPS).
• CU 362 control unit
• IO 351B module (general I/O module).
Dedicated Controls is available either as separate
components or as control cabinets.
The control system can be operated by:
• float switches
• a level sensor
• a level sensor and safety float switches.
The control cabinet is available for the following pump
sizes and starting methods:
• pumps up to and including 9 kW, direct-on-line
starting
• pumps up to and including 30 kW, star-delta starting
• pumps up to and including 30 kW, soft starter.
The separate control unit and modules can be built for
practically any size of system.

146
SL1, SLV pumps
11
LC and LCD When an SMS module (optional) is fitted in an LC or

Accessories
LCD controller, it acts as a time recorder for the
The Grundfos LC and LCD ranges of level controllers
pumps, and when programmed (using an ordinary
comprise three series with a total of six variants:
mobile telephone with text messaging facility), it can
• LC and LCD 107 level controllers operated by air send text messages containing "high-level alarm" and
bells "general alarm" information about operation and the
• LC and LCD 108 level controllers operated by float number of times the pump has started. The SMS
switches module is also available with battery and can thus
• LC and LCD 110 level controllers operated by send text messages that will inform you of power
electrodes. failure and when power has been restored.
All controllers are ideally suited for applications For further information, see the data booklet or
requiring up to 11 kW motors for direct-on-line starting. installation and operating instructions for the LC and
The LC and LCD can also be supplied with an LCD controllers on www.grundfos.com (WebCAPS).
integrated star-delta starter for applications requiring
larger motors up to and including 30 kW.
Features and benefits
• Control of one pump (LC) or two pumps (LCD).
• Automatic alternating operation of two pumps
(LCD).
• Automatic test run (prevents shaft seals from
becoming jammed in the event of long periods of
inactivity).
• Water hammer protection.
• Starting delay after power supply failure.
• Automatic alarm resetting, if required.
• Automatic restarting, if required.
• Alarm output as NO and NC.
TM04 2360 2408

LCD 110

Fig. 25 LCD 110 for two-pump installations

147
SL1, SLV pumps
11
Accessories

Name DC LC LCD

Application

One pump ● ● ●

Two pumps ● ●

Mixer ●

Battery backup ●

Level sensor

Float switch ● ● ●

Electrodes ● ●

Air bell ● ●

Pressure sensor ●

Ultrasonic sensor ●

Analog level sensor with safety float switches ●

Starting method

Direct-on-line starting (DOL) ● ● ●

Star-delta starting ● ● ●

Soft starter ●

Basic functions

Start and stop of pump(s) ● ● ●

Pump alternation ● ●

High-level alarm ● ● ●

Dry-running-level alarm ● ● ●

Flow measurement (calculated or via flow sensor) ●

Pump statistics ●

Conflicting-levels alarm ●

Advanced functions

Start and stop delays (prevent water hammering) ● ● ●

Motor temperature sensor ● ● ●

Test run/anti-seizing ● ● ●

Daily emptying (emptying the pit once a day) ●

Water-in-oil sensor input ●

Communication

SMS messaging ● 1) ● 2) ● 2)

SCADA communication (GSM/GPRS) ● 1)

User interface

Level indication ● ● ●

Graphical display ●

PC Tool WW Controls ●

1)
If a CIM 250 GSM/GPRS module is fitted in the CU 362.
2)
If an SMS module is fitted.

148
SL1, SLV pumps
12

12. Further product information

Further product information


WebCAPS
WebCAPS is a Web-based Computer Aided Product
Selection program available on www.grundfos.com.
WebCAPS contains detailed information on more than
220,000 Grundfos products in more than
30 languages.
Information in WebCAPS is divided into six sections:
• Catalogue
• Literature
• Service
• Sizing
• Replacement
• CAD drawings.

Catalogue

Based on fields of application and pump types, this section


contains the following:
• technical data
• curves (QH, Eta, P1, P2, etc.) which can be adapted to the
density and viscosity of the pumped liquid and show the
number of pumps in operation
• product photos
• dimensional drawings
• wiring diagrams
• quotation texts, etc.

Literature

This section contains all the latest documents of a given pump,


such as
• data booklets
• installation and operating instructions
• service documentation, such as Service kit catalogue and
Service kit instructions
• quick guides
• product brochures.

Service

This section contains an easy-to-use interactive service


catalogue. Here you can find and identify service parts of both
existing and discontinued Grundfos pumps.
Furthermore, the section contains service videos showing you
how to replace service parts.

149
SL1, SLV pumps
12
Further product information

Sizing 0 1

This section is based on different fields of application and


installation examples and gives easy step-by-step instructions in
how to size a product:
• Select the most suitable and efficient pump for your
installation.
• Carry out advanced calculations based on energy,
consumption, payback periods, load profiles, life cycle costs,
etc.
• Analyse your selected pump via the built-in life cycle cost tool.
• Determine the flow velocity in wastewater applications, etc.

Replacement

In this section you find a guide to selecting and comparing


replacement data of an installed pump in order to replace the
pump with a more efficient Grundfos pump.
The section contains replacement data of a wide range of pumps
produced by other manufacturers than Grundfos.

Based on an easy step-by-step guide, you can compare


Grundfos pumps with the one you have installed on your site.
When you have specified the installed pump, the guide will
suggest a number of Grundfos pumps which can improve both
comfort and efficiency.

CAD drawings

In this section, it is possible to download 2-dimensional (2D) and


3-dimensional (3D) CAD drawings of most Grundfos pumps.

These formats are available in WebCAPS:

2-dimensional drawings:
• .dxf, wireframe drawings
• .dwg, wireframe drawings.

3-dimensional drawings:
• .dwg, wireframe drawings (without surfaces)
• .stp, solid drawings (with surfaces)
• .eprt, E-drawings.

WinCAPS
WinCAPS is a Windows-based Computer Aided
Product Selection program containing detailed
information on more than 220,000 Grundfos products
in more than 30 languages.
The program contains the same features and
functions as WebCAPS, but is an ideal solution if no
internet connection is available.
WinCAPS is available on DVD and updated once a
year.

Fig. 26 WinCAPS DVD

150
SL1, SLV pumps
12
GO CAPS

Further product information


Mobile solution for professionals on the GO!

CAPS functionality on the mobile


workplace.

Subject to alterations.

151
ECM: 1115362
96899826 0614

GRUNDFOS A/S

www.grundfos.com
Telephone: +45 87 50 14 00
DK-8850 Bjerringbro . Denmark
The name Grundfos, the Grundfos logo, and be think innovate are registered trademarks owned by Grundfos Holding A/S or Grundfos A/S, Denmark. All rights reserved worldwide. © Copyright Grundfos Holding A/S

You might also like