TTL Putty
TTL Putty
TTL Putty
07 22:14:16
=~=~=~=~=~=~=~=~=~=~=~=
яяЫ>їУыfF™j ю> HB H @ <.STARTUP>
<cpu>: nVidia Quickboot 17.42.02 (Build Nov 26 2018)
<cpu>: modified by e.Solutions GmbH
<cpu>: Loading stage 2 primary bootloader...
<cpu>: Stage2 loaded
<cpu>: Trying to load kernel 8
<cpu>: Press <E> to run Emergency Flash Utility.
<cpu>: jumping to kernel
VFPv3: fpsid=41033094
coproc_attach(10): attach fe074cd0 (fe076ca4)
coproc_attach(11): attach fe074cd0 (fe076ca4)
Starting i2c interface for PMU
Starting devg-nvpower
Starting /usr/sbin/startup.sh ...
[OOC.Main] INFO: Version 2.2.1-RELEASE
[OOC.Main] INFO: ESO common libs version 4.5.2
[OOC.TimerGroup] INFO: Timer group thread started
[OOC.TimerGroup] INFO: Timer thread started
[ResMgrI2C.I2cIoc] INFO: I2C slave thread started
[OOC.SdisWlan] INFO: fsm:sdis_wlan_start_thread
[OOC.SdisWlan] INFO: fsm:run_pdd_callback state change <> (-1)
= > (0) event (1) registered (0) allow request (0) Clamp15 (0)
ClampS (0) mmi_state (0)
[OOC.SdisWlan] INFO: fsm:run_pdd_callback inactive state
update carwakeup (0)
[OOC.IOC] INFO: ioc:Received Event UpdateCarWakeup 0
[OOC.DelayManager] INFO: Clear DelayBits requested: (0)
[OOC.DelayManager] INFO: eval_delay_request: phone: is 0,
requests 0 | uota: is 0, requests 0 | online: is 0, requests 0
| rtc: is 0, requests 0 | phone_pdd: is 0, requests 0 |
nav_pdd: is 0, requests 0
[ResMgrI2C.I2cIoc] INFO: Enabled I2C on IOC
[OOC.IOC] INFO: Clamp S: off
[OOC.IOC] INFO: Clamp 15: off
[OOC.IOC] INFO: Clamp 50: off
[OOC.IOC] INFO: Clamp X: off
[OOC.IOC] INFO: MMI state: MMI_STATE_ON_SWDL
[OOC.DelayManager] INFO: eval_delay_request: phone: is 0,
requests 0 | uota: is 0, requests 0 | online: is 0, requests 0
| rtc: is 0, requests 0 | phone_pdd: is 0, requests 0 |
nav_pdd: is 0, requests 0
[OOC.IOC] INFO: Key state: KEY_STATE_NONE
[OOC.SdisWlan] INFO: fsm:iocHandleClampStateChanged KL15(0)
KLS(0)
[OOC.IOC] INFO: MMI state right: MMI_STATE_UNDEFINED
[OOC.SdisWlan] INFO: fsm:updateTimInternalState for state
current next [0 => 2]event: (1)
[OOC.IOC] INFO: Key state right: KEY_STATE_NONE
[OOC.IOC] INFO: RVC active: false
[OOC.IOC] INFO: RVC variant: FBAS
[OOC.IOC] INFO: Startup variant: 0x00
[OOC.IOC] INFO: Last on: 0x01
[OOC.IOC] INFO: IOC shutdown request: SHUTDOWN_REQUEST_NONE
[OOC.IOC] INFO: IOC final shutdown request: false
[OOC.IOC] INFO: IOC car lock signal: false
1
[OOC.IOC] INFO: IOC power on pin status: true
[OOC.IOC] INFO: Activate display main
[OOC.IOC] INFO: Update DisplayMainOn: 1
[OOC.IOC] INFO: DisplayTurnOut: 1
[OOC.SdisWlan] INFO: fsm:iocHandleHandleUpdatePowerstateMain
mmi state change: (0)->(10) keycode state change : (0)->(0)
longpress state change detected: (0)
[OOC.IrcLogger] WARN: StartupMode 2 can not be mapped to an
IRC event
Path=0 - Generic SDHCI
target=0 lun=0 Direct-Access(0) - MMC:144 HCG8e5 Rev: 0.4
[fsmounter] 0000000192 waitfor device path 0 successful in
143ms
[fsmounter] 0000000198 mounted 0 in 149ms
[fsmounter] 0000000204 mounted 1 in 6ms
[fsmounter] 0000000216 mounted 2 in 12ms
[fsmounter] 0000000221 mounted 3 in 5ms
[fsmounter] 0000000227 mounted 4 in 6ms
[fsmounter] 0000000233 mounted 5 in 6ms
[fsmounter] 0000000240 mounted 6 in 7ms
LP_GPIO_ST 0
[fsmounter] 0000000254 mounted 7 in 13ms
[fsmounter] 0000000259 mounted 8 in 5ms
do start display
[fsmounter] 0000000267 mounted 9 in 7ms
[fsmounter] 0000000274 mounted 10 in 7ms
[fsmounter] 0000000281 mounted 11 in 7ms
[fsmounter] 0000000281 mounted 12 of 12 filesystems in 232ms
display_init: successfully set modes
do start pci
IFS Loader (Build Nov 26 2018)
IFSLOADER: time 1 ms, [wait for NOR done]
IFSLOADER: time 1 ms, [wait for NOR done]
IFSLOADER: mnand will wait for
/mnt/app/img_restore/main_stage2.ifs.lzo
IFSLOADER: NOR Load Block Infos
IFSLOADER: found lzo1z header
IFSLOADER: Max Comp Block Size: 1366528
IFSLOADER: found 30 blocks
IFSLOADER: mem da: phys 0x92000000 virt 0x2C100000
IFSLOADER: time 11 ms, [wait for MNAND done]
devg-nvcapture: thread priority: 15
devg-nvcapture: capture buffer count: 4
devg-nvcapture: capture timeout: 250 ms
devg-nvcapture: display width: 800
devg-nvcapture: display height: 480
devg-nvcapture: overlay: VIP
devg-nvcapture: metadata: NONE
devg-nvcapture: unadulterated CSI: Disabled
devg-nvcapture: CSI is forced to reset/restart on configure:
Enabled
devg-nvcapture: verbose level: 2
CAPP: entering main
[capp_misc] [INFO]: cap_app started
cap_app started
[capp_misc] [INFO]: CAPP: start read json config file:
/usr/sbin/cap_app.json
2
[capp_config] [INFO]: start to read config file:
/usr/sbin/cap_app.json
[capp_misc] [INFO]: read json config finished
[capp_misc] [INFO]: assuming ADV7180
[cal_capture_engine] [INFO]: XSe: GPIO interrupt for ADV718x:
'/dev/nvgpio/vd1_int_q'
[cal_capture_engine] [INFO]: XSe: interrupt mode
[cal_capture_engine] [INFO]: config.shadowRegister[0x51]: 0x2d
[cal_capture_xse] [DEBUG]: The master send failed. The causes
include: bad slave address, bad bus speed, bus is busy.
[cal_capture_engine] [INFO]: CSI engine is uinsg
/dev/nvgpio/csi_lock for LVDS interrupts
[cal_gpio] [INFO]: enter 104
[cal_gpio] [INFO]: exit 104
[cal_gpio] [INFO]: enter 107
[cal_gpio] [INFO]: exit 107
[cal_gpio] [INFO]: enter 1st loop
[cal_gpio] [INFO]: enter 112
[capp_misc] [INFO]: CAPP: do not generate annotations in RVC
stream
[cal_gpio] [INFO]: exit 112
[cal_gpio] [INFO]: -->LVDS lockpin available now
[cal_gpio] [INFO]: enter 135
[cal_gpio] [INFO]: exit 135
[cal_gpio] [INFO]: READ 0x30
[cal_gpio] [INFO]: initial level = low
[cal_gpio] [INFO]: enter 144
[cal_gpio] [INFO]: exit 144
[cal_gpio] [DEBUG]: lockpin user callback--->
[cal_gpio] [INFO]: enter 68
[cal_gpio] [INFO]: exit 68
[cal_gpio] [INFO]: enter 71
[cal_capture_engine] [INFO]: lvds_lock_cb
[cal_gpio] [INFO]: exit 71
[cal_capture_csi] [INFO]: callback_lock_pin level: 0
[cal_gpio] [INFO]: enter 80
[cal_gpio] [INFO]: exit 80
[cal_gpio] [INFO]: enter 83
[cal_gpio] [INFO]: exit 83
[cal_gpio] [DEBUG]: lockpin user callback<---
[cal_capture_csi] [INFO]: LVDS callback registered, sending
initial value 0
[cal_gpio] [DEBUG]: waiting for next level change: 2
[cal_gpio] [INFO]: enter 212
[capp_misc] [INFO]: LVDS_CALLBACK from CAL to CAP_APP: 0
[cal_gpio] [INFO]: exit 212
[cal_gpio] [INFO]: enter 213
[capp_ipc_ooc] [INFO]: allocated 'to ooc' channel 11d140
[cal_gpio] [INFO]: exit 213
[cal_gpio] [INFO]: enter 216
[capp_ipc_ooc] [INFO]: connected to 'from ooc' channel 11d168
[cal_gpio] [INFO]: exit 216
[cal_capture_csi] [DEBUG]: handleCallbackLVDSLockPin: lock pin
is 0
[cal_gpio] [INFO[OOC.DisplayManager] INFO: Initialized OOC >
Display Manager connection.
]: enter 217
3
[capp_ipc_ooc] [INFO]: -> RVC_FBAS
[cal_gpio] [INFO]: enter 80
[capp_ipc_ooc] [INFO]: -> RVC_OFF
[cal_gpio] [INFO]: exit 217
[capp_ipc_ooc] [INFO]: -> START_ANIMATION
[capp_events] [INFO]: evtRVCCoding
CSABase[0x030c,3] 0x000000
m IOBlkSize[0x0310,2] 0x0000
a IOBlkSize*[0x0340,2] 0x0000
HostIntMask[0x0002,1] 0x00
HostIntStat[0x0003,1] 0x00
s RdBitmap[0x0004,2] 0x0000
e WrBitmap[0x0006,2] 0x0001
rv RdLenP0[0x0008,2] 0x0000
mngt RdLenP1[0x000a,2] 0x0000
RdLenP2[0x000c,2] 0x0000
RdLenP3[0x000e,2] 0x0000
MV8787 SDIO Function 3 IO Registers:
00:00:05.658 swdlclient SWDLMainMM.. SWDL_MAIN
info 1279 SWDLMainMMX::CreateInitProxy(367):
connect InitCopy proxy
IOPort[0x0078,3] 0x010000
: H2CIntEvent[0x0000,1] 0x00
: HostIntRSR[0x0001,1] 0x00
i HostIntMask[0x0002,1] 0x00
n HostIntStat[0x0003,1] 0x00
it RdBitmap[0x0004,2] 0x0000
( WrBitmap[0x0006,2] 0x0000
ar RdLenP0[0x0008,2] 0x0000
RdLenP1[0x000a,2] 0x0000
RdLenP2[0x000c,2] 0x0000
g RdLenP3[0x000e,2] 0x0000
cMV8787 SDIO Function 1 Registers:
, IOPort[0x0078,3] 0x010000
a H2CIntEvent[0x0000,1] 0x00
r HostIntRSR[0x0001,1] 0x00
g HostIntMask[0x0002,1] 0x00
v) HostIntStat[0x0003,1] 0x00
RdBitmap[0x0004,2] 0x0000
WrBitmap[0x0006,2] 0xffff
RdLenP0[0x0008,2] 0x0000
RdLenP1[0x000a,2] 0x0000
WLAN is UP
00:00:06.773 traceserver SlogReader SlogChannel
error 2098 00:00:06.773@(50:0): _sdhci_debugdump: ERINTEN
0x3ff
00:00:06.773 traceserver SlogReader SlogChannel
21
error 2099 00:00:06.773@(50:0): _sdhci_debugdump:
NINTSIGEN 0x1ff
00:00:06.773 traceserver SlogReader SlogChannel
error 2100 00:00:06.773@(50:0): _sdhci_debugdump:
ERINTSIGEN 0x1ff
00:00:06.773 traceserver SlogReader SlogChannel
error 2101 00:00:06.773@(50:0): _sdhci_debugdump:
AC12ERRSTS 0x0
00:00:06.773 traceserver SlogReader SlogChannel
error 2102 00:00:06.773@(50:0): _sdhci_debugdump: CAP
0xe7ff2d80
00:00:06.774 traceserver SlogReader SlogChannel
error 2103 00:00:06.773@(50:0): _sdhci_debugdump: CAP2
0x74
00:00:06.774 traceserver SlogReader SlogChannel
error 2104 00:00:06.773@(50:0): _sdhci_debugdump: MCCAP
0x969696
00:00:06.774 traceserver SlogReader SlogChannel
error 2105 00:00:06.773@(50:0): _sdhci_debugdump:
ADMA_ERRSTS 0x0
00:00:06.774 traceserver SlogReader SlogChannel
error 2106 00:00:06.773@(50:0): _sdhci_debugdump:
ADMA_ADDRL 0x0
00:00:06.774 traceserver SlogReader SlogChannel
error 2107 00:00:06.773@(50:0): _sdhci_debugdump:
ADMA_ADDRH 0x0
00:00:06.774 traceserver SlogReader SlogChannel
error 2108 00:00:06.774@(50:0): _sdhci_debugdump:
SLTINTSTS 0x0
00:00:06.774 traceserver SlogReader SlogChannel
error 2109 00:00:06.774@(50:0): _sdhci_debugdump: CTRLRVER
0x1
00:00:06.774 traceserver SlogReader SlogChannel
error 2110 00:00:06.774@(50:0): _sdhci_debugdump:
VNDCLKCTL 0x52d0d
00:00:06.774 traceserver SlogReader SlogChannel
error 2111 00:00:06.774@(50:0): _sdhci_debugdump:
VNDMISCCTL 0xffff0000
00:00:06.775 traceserver SlogReader SlogChannel
error 2113 00:00:06.774@(50:0): DCMD_SDIO_SHMEM_INIT func
1: shmfd 8 cached 1 phys_cont 1 sname '/mv8787wl'
00:00:06.775 traceserver SlogReader SlogChannel
error 2114 00:00:06.774@(50:0): DCMD_SDIO_SHMEM_INIT func
1: flags 0x2a nsize 32976 extra 32896 ntbd 0 off_tbd 0 nrbd 0
off_rbd 40
00:00:06.779 traceserver SlogReader SlogChannel
error 2115 00:00:06.778@(50:0): _sdio_shmem_init: shmvptr
0x28001000 shmphys64 0xe3b72000 shmphys 0xe3b72000 nsize 32976
shmclen 32976
00:00:06.796 traceserver SlogReader SlogChannel
error 2122 00:00:06.795@(19:1800): Using fw file
/var/FwImage/sd8787_uapsta.bin
00:00:06.799 traceserver SlogReader SlogChannel
fatal 2123 00:00:06.798@(19:1800): WLAN FW already
running! Skip FW download
00:00:06.800 traceserver SlogReader SlogChannel
fatal 2124 00:00:06.798@(19:1800): WLAN FW is active
22
00:00:06.831 cinflash 0x00000001 CINFLASH_MAIN
info 2134 cinflash created [V 1.1.2]
PMon: ADD /navigation/AppStartATF navi navi
/navigation/SignalMapper-1.4.cfg
00:00:06.855 traceserver SlogReader SlogChannel
error 2145 00:00:06.850@(19:1800): mlan0: BSS0: FWVer
SD8787-14.44.35.p233
00:00:06.855 traceserver SlogReader SlogChannel
error 2147 00:00:06.850@(19:1800): uap0: BSS1: FWVer
SD8787-14.44.35.p233
ESO Fwk triggering initApplication with runmode = 200 sys 1
ESOComm SystemUpdate AppRunMode now 200
Wait for /dev/mcd/INSERTED
wait for /dev/mcd/INSERTED finished
fetchSwdlMode
00:00:06.885 cinflash servmngt::..
CINFLASH_TRACE_CHANNEL trace 2153
CinFlashApp::initApplication(34):
00:00:06.887 cinflash CinflashAp..
CINFLASH_TRACE_CHANNEL trace 2154
CinFlashApp::threadLoop(167): business logic started
initializing with app run mode 0 and system run mode 1 and
persistence access mode: 2
00:00:06.889 cinflash CinflashAp.. CINFLASH_MAIN
trace 2155 CINTMain::CINTMain(29):
00:00:06.890 cinflash servmngt::..
CINFLASH_TRACE_CHANNEL trace 2156
CinFlashApp::runApplication(61):
00:00:06.890 cinflash CinflashAp..
CINFLASH_TRACE_CHANNEL trace 2157
CinFlashApp::threadLoop(184): handle run request; now I can
really execute my business!
00:00:06.890 cinflash CinflashAp..
CINFLASH_TRACE_CHANNEL trace 2158
CinFlashApp::threadLoop(186): creating service instance
00:00:06.890 cinflash CinflashAp.. CINFLASH_MAIN
trace 2159 CINTMain::startThread(122): start
CINTMain thread
00:00:06.890 cinflash CinflashAp.. CINFLASH_MAIN
trace 2160 CINTMain::startThread(129): CINTMain
started
---------- MyQueue ----------Initial RunRequested Procs 0 200
StartTransitiveModi runmode = 200 sys 1 current runmode = 0
ESOComm SystemUpdate AppRunMode now 200
StartTransitiveModi :About to start COMM
47
00:00:15.415 smartphone_int.. Smartphone.. Media_TraceHelper
error 4245 [CPersistencyProviderEventListener]
accessModeChanged within base class called
dumping error log: /mnt/ota/system/logs/error_1000020-001.zip
16253: ********** KANZI State ***********
16253: Last entered method: engine3DSetLastmode
16253: Car type: 0
16253: Car vehicle line: 0
16253: Car hand setting: 0
16254: Region: 0
16254: Lastmode: 140
16254: Is charisma available: 0
16254: BG loading executed: 0
16254: Rendering enabled: 0
16254: Previous menu type: -1
16254: Menu type: -1
16254: Memory manager size: 32000000
16254: Memory manager max. available size: 29349028
16254: Launched transition entry: NULL
16254: Play menu transition: 0
16254: Play menu transition backwards: 0
16254: CurrentView: NULL
16254: PreviousView: NULL
16255: Wizard currentfocuseditem: 0
16255: Wizard cursormoving: 0
16255: Wizard focuscounter: 0
16255: Wizard focuseditem: 0
16255: Wizard isFocusPlayed: 0
16255: Wizard keyPressed: 0
16255: Wizard keyReleased: 0
16255: Wizard prevCursorPos: -1
Trigger synchonization!16255: Wizard functions: 0
login:
login: t 00:00:06.293 media MediaContr..
Media_MediaList_MediaL.. error 4758 [MediaList]
handleGlobalFlag : Request failed
root
Password:
Login incorrect
login: 00:00:54.346 esosearchProc JobDispatc..
ESOSEARCH_App error 4826 Health check for
Truffles NavigationSearch has failed, navigation search will
not work correctly!
52