2023 SUPER MOCK INTEGRATED SCIENCE 3

MOCK 2023 INTEGRATED SCIENCE 3 2 hours

TEST OF PRACTICAL WORK
[60 marks]

1. The diagram below is an illustration of the head of a fowl on which a management practice has
been carried out. Study the diagram carefully and answer the questions that follow

i. State the management practice that has been carried out on the fowl [2 marks]
…………………………………………………………………………………………………
…………………………………………………………………………………………………
…………………………………………………………………………………………….……
ii. Name the parts labeled I, II, III and IV. [4 marks]
…………………………………………………………………………………………………
…………………………………………………………………………………………………
…………………………………………………………………………………………………
…………………………………………………………………………………………………
…………………………………………………………………………………………………
…………………………………………………………………………………………………
iii. Give two reasons for carrying out the management practice. [2 marks]
…………………………………………………………………………………………………
…………………………………………………………………………………………………
…………………………………………………………………………………………………
…………………………………………………………………...............................................
iv. Name two tools used for carrying out the management practice. [2 marks]
…………………………………………………………………………………………………
…………………………………………………………………………………………………
…………………………………………………………………………………………………

b. The diagram below is an illustration of farm equipment. Study it carefully and answer the
questions that follow.

i) Identify the farm equipment illustrated [2 marks]

......................................................................................................................................................
......................................................................................................................................................

ii) Name the husbandry practice that is carried out using the equipment illustrated
[2 marks]

…………………………………………………………………………………………………..
…………………………………………………………………………………………………
…………………………………………………………………………………………………

iii) Mention two reasons for performing the husbandry practice named in (ii) above
[2 marks]

…………………………………………………………………………………………………
…………………………………………………………………………………………………
…………………………………………………………………………………………………
………………………………………………………………………………………………..
 Ammeter readings Voltmeter readings

2. In the electrical circuit arrangement shown above, the rheostat is adjusted until the ammeter
shows maximum current reading, Io corresponding to a voltmeter reading, Vo. The rheostat is
further adjusted for current values I1, I2, I3, I4 and I5. The corresponding voltmeter readings are
also V1, V2, V3, V4 and V5. The figures below show the ammeter and voltmeter readings for the
experiment described above.

(a) Read and record the ammeter readings, I = I1, I2, I3, I4 and I5 and the corresponding
voltmeter readings, V = V1, V2, V3, V4 and V5. Complete the table below.

V/v I/A

V1 = I1 =

V2 = I2 =

V3 = I3 =

V4 = I4 =

V5 = I5 =

[5 marks]
(b) Plot a graph with V as the ordinate and I as the abscissa. [5 marks]
(c) Calculate the slope of your graph [2 marks]

(d) What is the significance of the slope? [2 marks]

3. The set-up is for the preparation of a certain gas in the laboratory.

a. Name the parts labelled I to VI in the diagram [6 marks]

I…………………………………………………………………………………………………....

II……………………………………………………………………………………………………

III……………………………………………………………………………………………………

IV…………………………………………………………………………………………………...

V……………………………………………………………………………………………………

VI…………………………………………………………………………………………………..

ii. What method is being used to collect the gas? [2 marks]

………………………………………………………………………………………………............

……………………………………………………………………………………………………….

b. When there is addition of the compounds, Calcium Carbonate and Hydrochloric acid using the set
up illustrated above,

i. Name the gas that would be produced. [2 marks]

…...…………………………………………………………………………………………………...

…..……………………………………………………………………………………………………
ii. Write a balanced chemical equation for the reaction mentioned in (b) above [2 marks]

………………………………………………………………………………………………............

……………………………………………………………………………………………………….

iii. How can the gas named in b(i) be tested for? [2 marks]

………………………………………………………………………………………………............

……………………………………………………………………………………………………….

iv. State two (2) uses of the gas named in b(i) [2 marks]

………………………………………………………………………………………………............

………………………………………………………………………………………………………

……………………………………………………………………………………………………….

……………………………………………………………………………………………………….

4. Study the diagrams below and answer the questions that follow

A B C
D

i. Identify each of the types of teeth illustrated above [4 marks]

A…………………………………………………………………………………………………....

B……………………………………………………………………………………………………

C……………………………………………………………………………………………………

D…………………………………………………………………………………………………...
ii. Describe the structure of tooth B [2 marks]

………………………………………………………………………………………………………
……………………………………………………………………………….……………………
………………………………………………………………………………………………………

iii. State one function of each type of the tooth [4 marks]

A…………………………………………………………………………………………………....

B……………………………………………………………………………………………………

C……………………………………………………………………………………………………

D……….…………………………………………………………………………………………...

iv. Mention four (4) measures employed to ensure proper dental hygiene [4 marks]

………………………………………………………………………………………………............

………………………………………………………………………………………………………

……………………………………………………………………………………………………….

………………………………………………………………………………………….……………

………………………………………………………………………………………………………

……………………………………………………………………………………………………….

…………………………………………………………………………………………………….….

……………………………………………………………………………………………………….

END OF PAPER