Scribd
Upload
25 views2 pages

Technical SPecs

Uploaded by

yogesh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
25 views2 pages

Technical SPecs

Uploaded by

yogesh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

3.

12 core Fiber
Supply and laying of 12-core single-mode armored fiber cable per the following
specifications.
Fiber type: Single-mode (SM) G.657A1
Core count: 12 core
Cable Type: Loose Tube
Outer jacket material: Water-tight, Flame retardant, Low smoke zero halogen
Armor: Corrugated steel tape armored
Cable overall diameter: 12.0 mm or more
Conductor type: loose tube, gel-filled/gel-free
Cable minimum tensile strength of the installation should be more than 2200 N
Cable minimum crush resistance of the installation should be more than 21 kN/km
Industry Standard: - With the latest amendments of IEC 60794/Telcordia
(BELLCORE) GR 20, IEC 60793.
IEC Flammability: IEC 60332-1-2/IEC 60332-3-22
Laying: On the wall and underground with the help of GI saddle clips or in HDPE
pipe.

4. 2 core SM unarmoured
Supply and laying of 2-core single-mode fiber cable per the following
specifications.
Fiber type: Single-mode (SM) G.657A1/G.657A2
Core count: 2 cores
Cable Type: Tight buffered
Outer jacket material: Water-tight, Flame retardant, Low smoke zero halogen
Conductor type: Tight buffer, gel-free.
The cable minimum tensile strength of the installation should be more than 100 N
Industry Standard: - With the latest amendments of IEC 60794/Telcordia
(BELLCORE) GR 20, IEC 60793.
IEC Flammability: IEC 60332-1-2/IEC 60332-3-22
Laying: On the wall and underground with the help of GI saddle clips or in HDPE
pipe.

5. Fiber patch cord SM 2 meter


Supply and installation of Fibre Patch cord with the following specifications.
Fiber type: Single-mode (SM)
Standard: - G.657A2/ G.657A1
Patch cord type: - simplex
Jacket material:- Low smoke Zero-halogen (LSZH)
Cable length: - 2 meters/ 7 Feet
Connector type (A):- SC APC
Connector type (B):- SC APC

6. Splitter 1X32 rackmount


Supply and installation of rack mounted fiber splitter box with the following
specifications.
2×32 ABS PLC Splitter Box
Fibre Mode: Single Mode Corning SMF G.657A1
Typical insertion loss: 14 db/17.7 db
1x Input Fiber
16x Output Fibers
connectorized with SC APC connectors
Operating bandwidth:- 1260~1650nm

9. 24 port LIU
Supply and installation of fully populated/loaded Fiber LIU with single mode SC
APC type pigtails G.657A1 and coupler.
The material used: - Cold rolled steel
Pigtail type: - Single-mode
connector type: - SC APC duplex
Number of Ports: - 24
Size: - 1 Rack unit
Suitable for pigtail splicing or IFC Breakout cables

10. Home termination Box


Supply and installation of fully populated/loaded Fibre joint closure box rectangular
type with single mode SC APC type pigtails and couplers.
Pigtail type: - Single-mode G.657A1
connector type: - SC APC
Number of Ports: - 2
Installation: - On the wall or as per requirement.

You might also like