t4305cpcpr en
t4305cpcpr en
t4305cpcpr en
Declaration of Performance
T4305CPCPR
1. Unique identification code of the product-type:
Power-teK BD 700, Power-teK BD 700 ALU
4. Authorised representative:
Not applicable
7. Declared Performances:
See next page
Rate of release of corrosive substances Trace quantities of water-soluble ions and the pH- CL 10
value
200 0,059
300 0,075
400 0,095
500 0,119
600 0,147
700 0,178
NPD NPD
Rate of release of corrosive substances Trace quantities of water-soluble ions and the pH- CL 10
value
200 0,059
300 0,075
400 0,095
500 0,119
600 0,147
700 0,178
NPD NPD
Not applicable
The performance of the product identified above is in conformity with the set of declared performances.
This declaration of performance is issued, in accordance with Regulation (EU) No 305/2011, under the sole
responsibility of the manufacturer identified above.
[SignatureGraphic]
(Signature)
Footnotes
{a} The requirement on a certain characteristic is not applicable in those Member Stats (MSs) where there are no regulatory requirements on that characteristic for the intended
use of the product. In this case, manufacturers placing their products on the market of these MSs are not obliged to determine nor declare the performance of their products with
regard to this characteristic and the option ‘No performance determined’ (NPD) in the information accompanying the CE marking (see ZS.3) may be used. The NPD option may not
be used, however, where the characteristic is subject to a threshold level (thermal resistance (thermal conductivity and thickness)).
{b} The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of the product is related to the organic contents, which cannot increase with
time.
{c} Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than
atmospheric air.
{d} The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains
constant or decreases with high temperature.