}PRINTyour name below and return this booklet ihcansnecthee Falaretodeve may” | TEST CODE in disqualification, FORM TP‘ MAY/JUNE 2017 CARIBBEAN EXAMINATIONS COUNCIL CARIBBEAN SECONDARY EDUCATION CERTIFICATE® EXAMINATION TECHNICAL DRAWING Paper 01 — Technical Proficiency I hour 15 minutes 09 JUNE 2017 (a.m.) READ THE FOLLOWING INSTRUCTIONS CAREFULLY. 1, This test consists of 60 items. You will have 1 hour and 15 minutes to answer them. 2. In addition to this test booklet, you should have an answer sheet. 3. Each.item in this test has four suggested answers lettered (A), (B), (C), (D). Read each item you are about to answer and decide which choice is best. 4, On your answer sheet, find the number which corresponds to your item and shade the space having the same letter as the answer you have chosen. Look at the sample item below. Sample item In drawings, thin short dashes represent Sample Answer (A) adjacent pans ®e@00 (B) hidden details (C) movable parts (D) irregular details The best answer to this item is “hidden details”, so (B) has been shaded, 5. If you want to change your answer, erase it completely before you fill in your new choice. 6. When you are told to begin, turn the page and work as quickly and as carefully as you can. Ifyou cannot answer an item, go on to the next one, You may return to that item later: 7. You may do any rough work in this booklet. 8. Figures are not necessarily drawn to scale. DO NOT TURN THIS PAGE UNTIL YOU ARE TOLD TO DO Si Copyright © 2015 Caribbean Examinations Council Alll rights reserved.2; Item 1 refers to the following diagram. at 025, Which of the following are true about 1025 in the diagram above? 4. i Itis an abbreviation for radius. Tl. It indicates that the surface is square. IIL, Itavoids using a second dimension. IV. It indicates that the drawing is in first-angle projection. (A) Land tonly (B) — Fand Il only 4@) Mand Ill only (D) Mand IV only Item 2 refers to the following drawing ‘instrument. BN Which of the following represents the size of angle X in the drawing instrument shown above? 30° (B) 45° (©) 60° (D) 90° + om Which of the following lines is used to indicate a cutting plane on a drawing? Short arrowheads are usually placed at right angles to the ends of which of the following types of lines? Cutting plane (B) Phantom © Centre (D) Object Item § refers to the following construction. In the construction above, the angle X is (A) 60° (B) 65° (C) 70° in? GO ON TO THE NEXT PAGE,6. In shape description, centre lines are used Item 10 refers to the following diagram. to (A) locate hidden object lines (B) determine the height of letters (C)_ construct base lines vertical to surfaces (D) locate positions and dimensions Item 7 refers to the following lines. HWW 10. The diagram above shows how to find the centre of an are with radius R which is 7. The lines shown above are conventions tangential to used on standard shapes for common bar ‘ stocks to indicate (A) astraight line (B)__alineandacircle (A) the axes of symmetrical parts S— wo straight lines meeting at any (B)_ that the edges are to be measured angle — the continuation of the abjects (D) two straight lines meeting at right (D) that sections are to be removed angles 8 When a straight fine touches an are and » tem 11 refers to the following construction. forms a right angle with the radius of the circle achord is formed a point of tangency is formed (Cc) the curve blends exactly (D) the line and the are are similar in shape 9. Which of the following is NOT a step in the process of bisecting an angle? (B) Drawing a perpendicular through ‘1. Which of the following constructions is the ares illustrated above? (©) Opening the compasses to any suitable radius (A) Asquare (D) Drawing a line through intersecting (B)__lrregular curves anes (ETircles in isometric (D) Circles in perspective GO ON TO THE NEXT PAGE 201712. 13. Which of the following statements BEST describes an equilateral triangle? ESE Allthe sides and angles are equal. (B) All the sides are equal, but the angles are unequal. (©) Alllthe sides are unequal but the angles are equal. (D) Neither the sides nor the angles are equal. Jtem 13 refers to the following triangle. The triangle illustrated above can be BEST constructed with the use of (A) anuler and protractor (B) compasses and a protractor (©) __ asset square and protractor PY compasses, a ruler and a pencil m7 15, Item 14 refers to the following diagram, ‘The diagram above shows the intersection of the three isometric axes, What is the value of the angle 8? (A) 30? (By 45° = 60° (D) 120° Item 15 refers to the following diagram. Which of the following is true about the construction of any regular polygon as illustrated above? “297 4 is the 45° mark on the bisector of OP (B) 4 is the midpoint of the bisector of oP (©) 6 is the 30° mark on the bisector of OP (D) 6 is the 75° mark on the bisector of OP GO ON TO THE NEXT PAGE16. 17. 19. If the perimeter of a triangle is 120 mm se and its sides are in the proportion 4:5:3 respectively, then the lengths of the sides, inmm, are’ (A) 20,25 and 15 (B) 40, 60 and 20 (©) 35,55 and 30 (D) 40, 50 and 30 A quadrilateral with ONE pair of parallel Item 20 refers to the following diagram. a FL sides isa 20. In the diagram above, EF to EF is in the ay thombr o Peer ratio 3:4. The length of EFI is (c) trapezium: D) rallelogram Oe (D) _ parallelogr (B) ° 30 (C) 60 Item 18 refers to the following drat Oye 21. Given that one of the angles of a rhombus is 120°, which of the following is the value of one of the interior adjacent angles? (A) @) © (D) The drawing illustrated above represents (A) (B) © (D) a truncated square pyramid a part section of a right truncated pyramid an oblique rectangular pyramid a rectangular pyramid Which of the following is used to draw an octagon if the length of one side is given? A) (B) () (D) A protractor, using the 40° angle A protractor, using the 72° angle A 60° sef-square A 45° set-square 2017 40° sie 60° 81° GO ON TO THE NEXT PAGE,22, 23. The line AB = 75 mm is drawn, With 24. Which of the following diagrams BEST centres A and B, and with radius AB, arcs represents an external and an_ internal are drawn to intersect at C. If C is joined tangent? to A and B, then the triangle is represented by @ aS () () (D) OO OO OO O%o tem 25 refers to the following diagram. Which of the following drawings illustrates ‘an internal tangent? la x > iB major axis minor axis Ye major axis Ye minor axis w“ G=0) 2 awh equate © ee © ©) © 2017 GO ON TO THE NEXT PAGE26. 27. 28. os Item 26 refers to the following rectilinear figure. s R P Q ‘The rectilinear accuracy of the figures can be tested by measuring the (A) perpendiculars (B) diagonals (©) angle P (D) angle S A netball court has a length of 30 m. A line representing this distance measures 3.em. To what scale is the line drawn? (A) 1:1 000 (B) IY 500 (© 1: 200 (D) 1 100 Which of the following are MOST important when constructing a hexagon? 1. Itcan be constructed using pencil and compass only. Il, Itcan be constructed if given the diameter of the circumscribing circle, IIL. It can be constructed if given the across-flat dimension. IV. It can be constructed by drawing tangents to the circle with a 60° set square. (A) 1 Mand U1 only (B) 1, land 1V only (©) I, Iand 1V only (D) 1, Wand IV only 2017 29. 30. Item 29 refers to the following diagram, H ce F E In the diagram above, the angle EFH is (A) 30° (@) 45° (©). 60° (D) 90° Which of the following diagrams represents the drawing of a tangent to a circle at a point on the circumference? o g ©) GO ON TO THE NEXT PAGE,31. 32. ‘Aman has to transform a 100 mm square drawing to the largest octagonal shape that it will contain, Which of the following instruments should he use to perform the exercise? (A) 30° set square (8) Inside calipers (C)__ Dividers and set square (D) Outside calipers Item 32 refers to the following diagram. D AB ‘The diagram shows how to draw a (A) rectangle equal inarea toa triangle (B) square equal in area to a rectangle (C) triangle equal in area to a polygon (D) square equal in area to a triangle Item 33 refers to the following diagram. Which of the following is the eccentricity :PQ in the diagram above? (a) ou @ 12 © 13 @) 14 GO ON TO THE NEXT PAGE34, 35. 29% Which of the following constructions shows the correct division of a line (geometrically) into two parts in the ratio 2:3? 37. Which of the following instruments is used when drawing an irregular curve on a surface development? 38. (A) _ Isometric template (B) French curve (©) Compass (D) Bow pen 2017 ‘tem 36 refers to the following drawing, — Which of the numbered dimensions above represents a location dimension? (A) I @) ow © ml (0) IV The perpendicular distance between lines PQ and RS of a trapezium, PQRS, is 3.5cm, Which of the following lines would be parallel? (A) SPand QR (8) PRand Qs (C) RS and PO (BD) PSand QR In technical drawing, the phrase ‘curves meeting each other tangentially’ means that the curves (A) __ will meet smoothly (B) will not blend properly (C)___ have sufficient clearance (D) will meet at right angles GO ON TO THE NEXT PAGE39. 40. 41. -10- Which of the following lines is used to 42. outline a finished drawing? (A) @) The fire emergency exit doors leading from a workshop should open re) (B) © () inwards upwards outwards sideways Item 41 refers to the following diagram. t 80 mm i 50mm ‘The drawing above represents a room which measures 4000 mm * 2500 mm. The scale used in the drawing is A ois (B) 1:10 (120 (0) 1:50 2017 [80 mm __,t 43. Which of the following shapes isa pentagon “O “O a “O When a draftsman is drawing a true horizontal line, the peneil point should be guided by a (A) scale (B)— Tsquare (C) set square (D) straight edge GO ON TO THE NEXT PAGE,44, 45. Sle tem 44 refers to the following construction. ‘The purpose of the construction above, when completed, is to (A) draw an are to pass through three points (B) _—_ drawa tangent to the circle from A (C) draw two tangents to the circle from B (D) find the mean proportional to AO and CO Which of the following developments shows a éylinder which is cut obliquely at both ends? R @) © @) *2017 46. 41. ‘A student falls and hits his bead hard against the edge of a technical drawing table. He is MOST likely to suffer from a (A) concussion (B) heart attack (©) _ nervous breakdown (D) laughing fit Which of the following diagrams illustrates the procedure for drawing a perpendicular to line from a point outside the line? (A) P @®) \Y © @) GO ON TO THE NEXT PAGE48. 49. 50. -12- Which of the following scales would be used to produce the smallest drawing of a given object? (A) @) © @) When designing @ new product, which type of drawing is usually made FIRST? (A) Scale drawing () Sketch solution (©) Detailed solution (D) Engineering drawing Item 50 refers to the following diagram. si. Q 52. In the diagram above, a crank, QR, rotates about a fixed centre, R. A rod, PQ, is pin- pointed to the crank at Q and freely slides in guides at P, The locus traced by point S for one revolution of QR is (A) acone (B) — anellipse (©) aparabola (D) — ahyperbola 2017 Item 51 refers to the following construction, \ 2 The construction shows that (A) HBFGis twice the area of ABCD (B) ABCD is twice the area of HBFG (©) ABCD is equal in area to AEB (D) BCDB is equal in area wo BDE ‘When a plane figure has a linear reduction only, the (A) dimensions remain the same (B) proportions remain the same (C) proportions are changed (D) dimensions and proportions are changed GO ON TO THE NEXT PAGE53. a3 Which of the following is a view of a right, square pyramid? a @) a : cy Which of the following views would show aan object as if it were cut across, exposing inside details? (A) Frontal (B) Auxiliary (C) Exploded (D) Sectional 2017 defined as “The spiral of Archimedes’ (A) the path generated by a point travelling in a plane such that the difference of its distance from ‘two foci is constant and equal to the transverse axis (B) a plane curve generated by a point on a taut cord as it is unwound from the perimeter of a polygon (©) aplane curve generated by the path of a point on the perimeter of a wheel as the wheel travels on a straight track (D) the path generated by a point which revolves uniformly about a pole and has a uniform motion away from it GO ON TO THE NEXT PAGE=i4- Which of the following layouts represents 57. the correct orthographic projection of a shaped block? “ ®) oO @) v aa H— P Pr y c | u———_+P Pr y | | 4 P 58. 2017 Which of the following shows how to divide an angle geometrically? (ay ATS ¥90"| 90") ®) oO pane ©) Which of the following methods of drawing an ellipse involves constructing a rectangle? (A) Concentric cirele (B) _ Intersecting ares (©) _Interseeting line (D) Trammel GO ON TO THE NEXT PAGEeas = Given a point, P, on the circumference of Item 60 refers to the following diagram, a circle, which of the following diagrams BEST demonstrates the principle of constructing a tangent to a circle through the given point? (A) 60. representations is correct for the first-angle orthographic projection of the object shown above? B) (B) (A) Sl (B) (c) x © ae \ x (D) | o = END OF TEST IF YOU FINISH BEFORE TIME IS CALLED, CHECK YOUR WORK ON THIS TEST. 2017