Scribd
Upload
17 views15 pages

Local Area

The document discusses different types of local area network topologies including bus, ring, and star and compares fiber optic cables to copper cables. It notes that fiber optic cables offer advantages like higher speeds, larger bandwidth, and immunity to electromagnetic interference.

Uploaded by

Cruz Alberto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
17 views15 pages

Local Area

The document discusses different types of local area network topologies including bus, ring, and star and compares fiber optic cables to copper cables. It notes that fiber optic cables offer advantages like higher speeds, larger bandwidth, and immunity to electromagnetic interference.

Uploaded by

Cruz Alberto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 15

LOCAL AREA Presented By:

Ayushi Gagneja

NETWORK
Architecture
HOW CAN I CONNECT TWO
PC’S ?
LAN - LOCAL AREA
NETWORKS
Many applications of fiber-optic communication require networks
with a large number of users within a local area such that any user
can access the network randomly to transmit data to any other user.
Group of computers and associated devices that share common
communications line.
LAN systems are used by colleges, universities, office buildings, and
industrial plants, for making use of optical fiber.
Due to small transmission distances (<10 km), fiber losses are less.
Main advantage of using optical fibers is the large bandwidth
offered by OFC systems.
FIBER CABLE V/S COPPER CABLE
COMPARISON OF FIBER CABLE AND
COPPER CABLE IN LAN
ARCHITECTURE
COPPER CABLE FIBER OPTIC CABLE
Copper-based systems average >2 Optical fiber`s immunity to these
outages per year due to parameters increases network
electromagnetic interference, RF reliability by at least 60%
interference, crosstalk etc. Not difficult to install and test.
Two-fiber cable is 25-40% lighter
Difficult to install and test, while and occupies 15% less space.
occupying large space.
No problem of crosstalk, Has
Crosstalk occurs. infinite bandwidth and very reliable.
Error rates = few per minute Error rates = few per month
Comparably smaller distances Increased transmission distances
increases network design flexibility.
LAN TOPOLOGIES
Bus
Ring
Star
BUS TOPOLOGY
Ethernet, is the best example of a network protocol used to
connect multiple computers and used by the Internet.
It operates at speeds up to 1 Gb/s by using a protocol based
on carrier-sense multiple access (CSMA) with collision
detection.
Successful when coaxial cables are used for the bus , but
difficulties arise when optical fibers are used.
Limitation: Losses occurring at each tap, which limits the
number of users.
RING TOPOLOGY
Consecutive nodes are joined by point-to-point links in closed
loop
Data transmitted in frames
Medium access control is needed to determine when station can
insert frame using a token.
The use of ring topology for fiber-optic LANs has been
commercialized with the standardized interface known as the fiber
distributed data interface(FDDI). It operates at100Mbps by using
multimode fibers and 1.3µm transmitters based on light-emitting
diodes(LEDs). It is designed to provide backbone services such as
the interconnection of lower-speed LANs or mainframe computers.
FDDI(FIBER DISTRIBUTED
DATA INTERFACE)
Standard for data transmission on fiber optic lines in a LAN that can
extend in range up to 200 km (124 miles).

Provide backbone services like the interconnection of lower-speed


LANs or mainframe computers

The FDDI protocol can support thousands of users.

An FDDI network contains two token rings, one for possible backup
in case the primary ring fails.

The primary ring offers up to 100 Mbps capacity. If the secondary


ring is not needed for backup, it can also carry data, extending
STAR Each station connected directly to
TOPOLOGY central node
Central node can broadcast (hub)
Central node can act as frame
switch
 retransmits only to destination
 today’s technology
Classified as Active and Passive star
networks:
In active-star configuration,
incoming optical signals are
converted to the electrical domain
through optical receivers.
In passive star configuration,
distribution takes place in the
optical domain through devices
STAR TOPOLOGY CONT..

For an ideal N×N star coupler, the power reaching each node is simply
PT/N (neglecting transmission losses) since the transmitted power PT is
divided equally among N users. For a passive star composed of
directional couplers, the power is further reduced because of insertion
losses and can be written as
PN =(PT/N)(1− δ )^log2N,
where δ is the insertion loss of each directional coupler.
If we use δ = 0.05, PT = 1 mW, and PN = 0.1 µW as illustrative values, N
can be as large as 500 as compared to the case of bus topology where
N is 50.
A relatively large value of N makes star topology attractive for LAN
ADVANTAGES OF OPTIC CABLES IN LAN
Companies use fiber optic cables to set up their LAN don’t worry
about
dangling & tangled cables
data transmitted at higher quality and speed than with other
network applications
with no fire hazard because no electricity runs through the cables
are rugged as they are immune to electromagnetic interference
(EMI), extreme temperatures, and even lightning strikes
easier and faster to install
nearly limitless bandwidth capacity and ease of upgrade
Bandwidth demand will only grow, not shrink, in your local area
network. Your LAN must support not only today's demands for
voice, video and data, but future requirements like security and
building automation !!

You might also like