Scribd
Upload
57 views5 pages

Diesel Generating Set BF-C103: Standby Power 50Hz 82KW / 102KVA Prime Power 50Hz 75KW / 94KVA

The document describes a diesel generating set model BF-C103. It provides specifications for the generating set including its standby and prime power ratings, engine details, alternator specifications, standard features, options, dimensions, and weights. The control panel uses a micro processor controller to monitor and protect the generating set.

Uploaded by

jamalhabbas742
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
57 views5 pages

Diesel Generating Set BF-C103: Standby Power 50Hz 82KW / 102KVA Prime Power 50Hz 75KW / 94KVA

The document describes a diesel generating set model BF-C103. It provides specifications for the generating set including its standby and prime power ratings, engine details, alternator specifications, standard features, options, dimensions, and weights. The control panel uses a micro processor controller to monitor and protect the generating set.

Uploaded by

jamalhabbas742
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Diesel Generating Set BF-C103

MODEL BF-C103
Standby Power（50Hz） 82KW / 102KVA
Prime Power（50Hz） 75KW / 94KVA

Standard Features

General Features:
Engine（DCEC Cummins 6BT5.9-G1）
Radiator 50OC max, fans are driven by belt, with
safety guard
24V charge alternator
Alternator: single bearing alternator IP23, insulation
class H/H
Absorber
Dry type air filter, fuel filter, oil filter
Main line circuit breaker
Standard control panel
Two12V batteries, rack and cable
Ripple flex exhaust pipe, exhaust siphon, flange, PHOTO FOR REFERENCE ONLY
muffler
User manual

Generator Ratings

Standby Prime
P.F Standby
Voltage HZ Phase Ratings Ratings
（COS￠） Amps
（KW/KVA） （KW/KVA）
440/254 50 3 0.8 135 82/102 75/94
415/240 50 3 0.8 143 82/102 75/94
400/230 50 3 0.8 148 82/102 75/94
380/220 50 3 0.8 156 82/102 75/94
Prime Power (PRP): Prime power is available for an unlimited number of annual hours in variable
load application, in accordance with GB/T2820-97（eqv ISO8528）; A 10% overload capability is available
for a period of 1 hour within a 12-hour period of operation.
Standby Power Rating (ESP): The standby power rating is applicable for supplying emergency power
for the duration of a utility power interruption. No overload, utility parallel or negotiated outage operation
capability is available at this rating.

Sales Promises

Baifa Power provides a full line of brand new and high quality products. Each and every unit is strictly
factory tested.
Warranty is according to our standard conditions: a, 15 months, counted on the day BAIFA sold to the
first buyer; b, One year after installation; c, 1000 running hours (accumulated); subject to the earlier one.
Service and parts are available from Baifa Power or distributors in your location.

Specifications may change without notice 1/5


Diesel Generating Set BF-C103
ENGINE DATA

Manufacturer / Model: DCEC Cummins 6BT5.9-G1, 4-cycle


Air Intake System: Turbo
Fuel System: A type fuel pump
Cylinder Arrangement: 6 in line
Displacement: 5.9L
Bore and Stroke: 102*120（mm）
Compression Ratio: 17.3:1
Rated RPM: 1500rpm
Max. Standby Power at Rated RPM: 92KW/123HP
Governor Type: RSV Mechanical
Exhaust System
Exhaust Gas Flow: 16.3m3/min
Exhaust Temperature: 510℃
Max Back Pressure: 10kPa
Air Intake System
Max Intake Restriction: 6kPa
Burning Capacity: 6.2m3/min
Air Flow: 158m3/min
Fuel System
100%( Prime Power) Load: 208 g/kWh
75%(Prime Power) Load: 209 g/kWh
50%(Prime Power) Load:: 221 g/kWh
100%( Prime Power) Load: 20.3 L/h
Oil System
Total Oil Capacity: 16.4L
Oil Consumption: ≤4g/kwh
Engine Oil Tank Capacity: 12.3~14.2L
Oil Pressure at Rated RPM: 345kPa
Cooling System
Total Coolant Capacity: 27L
Thermostat: 82-95℃
Max Water Temperature: 104℃

Specifications may change without notice 2/5


Diesel Generating Set BF-C103
ALTERNATOR SPECIFICATION

GENERAL DATA
Compliance with GB755, BS5000, VDE0530, NEMAMG1-22, IED34-1, CSA22.2 and AS1359
standards.

Alternator Data
Number of Phase: 3
Connecting Type: 3 Phase and 4 Wires, “Y” type connecting
Number of Bearing: 1
Power Factor: 0.8
Protection Grade: IP23
Altitude: ≤1000m
Exciter Type: Brushless, self-exciting
Insulation Class, Temperature Rise: H/H
Telephone Influence Factor (TIF): ＜50
THF: ＜2%
Alternator Capacity: 100KVA
Alternator Efficiencies: 91.4%

GENERATING SET DATA

Voltage Regulation: ≥±5%


Voltage Regulation, Stead State: ≤±1%
Sudden Voltage Warp (100% Sudden Reduce): ≤+25%
Sudden Voltage Warp (Sudden Increase): ≤-20%
Voltage Stable Time (100% Sudden Reduce): ≤6S
Voltage Stable Time (Sudden Increase) ≤6S
Frequency Reduce: ≤5%
Frequency Waving: ≤1.5%
Sudden Frequency Warp (100% Sudden Reduce): ≤+12%
Sudden Frequency Warp (Sudden Increase): ≤-10%
Frequency Recovery Time (100% Sudden Reduce): ≤5S
Frequency Recovery Time (Sudden Increase): ≤5S

Specifications may change without notice 3/5


Diesel Generating Set BF-C103
Standard Features

◇ Baifa Standard Auto Control ◇ MCCB ◇ Special tool for Cummins


System engine
◇ Base Fuel Tank ◇ Oil Drain Valve ◇ One set of fuel filter / oil filter /
belt
◇ Starting batteries ◇ Exhaust System( including ◇ Documents
( Maintenance-Free & until muffler)
Watering-Free) with connective
wires

Options
Options
◇ Daily Fuel Tank ◇ Permanent Magnet ◇ Remote Control Panel
Generator(PMG)
◇ Battery Charger ◇ Rainproof Type ◇ Automatic Transfer Switch
◇ Engine Heater ◇ Soundproof Type ◇ Switch box
◇ Alternator Heater ◇ Trailer Type ◇ Spare Parts
◇ Water Separator

Dimension & Weight

Open Type with Base Fuel Tank


Overall Size: 2300×830×1700（mm）
Weight: 1310 kg

Soundproof Type
Overall Size: 2810×1140×1830（mm）
Weight: 1800kg
Trailer Type
Overall Size: 3390×1720×2470（mm）
Weight: 2450kg

Specifications may change without notice 4/5


Diesel Generating Set BF-C103
Standard Control Panel

Baifa Standard Control Panel uses micro


processing technique integrating digital,
intelligent and network techniques which can
carry out functions including auto start/stop, data
measure, alarming. The controller uses LCD
display, optional Chinese and English display
interface with operation easy and reliable. It can
be widely used in all types of generator automatic
control system for compact structure, advanced
circuits, simple connections and high reliability

Auto Module Control Panel

Auto Module Control Panel is the configuration


for nobody on duty controlling generators. This
kind of panel adopts auto module control system,
with large LCD display to show the menu.
Features: MRS10-can receive remote output
signal from ATS and realize auto start and stop of
generators.
MRS16-can realize all functions of MRS10, add
RS232 interface which can communicate with PC
to realize remote operation.
AMF25-Auto Mains Failure controller, can realize
all functions of MRS16, furthermore can detect
ATS and control directly.

Specifications may change without notice 5/5

You might also like