2020 Pdu STD Catalog

TRAVIS PATTERN & FOUNDRY
Founded in 1922 by Paul N. Travis, Travis Pattern and Foundry began as a small business
producing patterns for sand casting. As the company grew, nonferrous foundry operations
were added and industrial castings became a major part of the business.
The company experienced significant growth in the 1970's when it began producing a pro-
prietary line of irrigation products. Self propelled irrigation systems were developed; then,
as the product lines grew, casting operations increased and steel forming and galvanizing
capabilities were added.
From the mid 1980's until the present, nonferrous casting operations have increased and
more diverse product lines have been added. To support the power transmission industry,
Travis Switchgear manufactures disconnect switches of many types and sizes. The acquisi-
tion of Product Design Unlimited in 1992 gave us the ability to provide a full range of sub-
station connectors.
Travis Pattern and Foundry has experienced immense changes since its inception. Travis
supplies an extensive range of products to a growing number of customers all over the
world. Our facility has prevailed among the most modern anywhere. We continue to update
our production equipment to keep up with new technology and provide the highest quality
products available.
P
D PRODUCT DESIGN UTILITY • Manufactured by: Pattern & Foundry, Inc.
U
REVISION: 2020
GENERAL INFORMATION
ALUMINUM CONNECTORS
MATERIAL:
WELDED – 356-T6
BOLTED – 356-T6
COMPRESSION – 1100 GRADE (EC) , 1060-O
ALLOY COMPOSITION:
356-T6 SI 6.5-7.5 FE .50 CU .35 MG .25-.40 MN .35 ZN .35 TI .25 BAL. ALU.
1100 (EC) SI .15 FE .6-.8 CU .10 ZN .05 ALU. 99.0
1060-O SI.25 FE 35 CU.05 MG .03 MN .03 TI .03 V .05 ZN .05 AL 99.6
HARDWARE:
BOLTS: 2024-T4 ALLOY, COATED WITH NO. 205 ALUMILITE AND LUBRICATED WITH
NO-OX-ID.
NUTS: 6061-T6 ALLOY
LOCK WASHERS: 7075-T6 ALLOY
NOMINAL TORQUE VALUES FOR LUBRICATED ALUMINUM BOLTS:

3/8" = 15 FOOT POUNDS
BRONZE CONNECTORS
MATERIAL:
BOLTED – 833 (CONTACT METAL)
COMPRESSION – C-110 COPPER
ALLOY COMPOSITION:
833 CU 93.0 TN 1.5 PB 1.5 ZN 4.0
HARDWARE:
BOLTS : SILICON BRONZE (Not Lubricated)
NUTS & LOCK WASHERS: SILICON BRONZE
NOMINAL TORQUE VALUES FOR SILICON BRONZE BOLTS:

P
U
SPECIAL FEATURES
FEATURE SUFFIX
Static eliminator spring ..................................................SE

Hot-dip tin plating (pad only)...........................................TP
Tin Plate all.....................................................................TPA
Electro tin plating............................................................ETP
Silver plating...................................................................AG
Internal fit........................................................................I
External fit.......................................................................E
Center-formed pad..........................................................CF
Side-formed pad.......................................... ...................SF
Transverse pad................................................................V
Contact surface on both sides of pad.......... ...................DF
Pads at angle..........................degree deviation from parallel
Change to 1/2" hardware........................ .......................1/2HW
U-bolts in lieu of hex bolts..............................................U
Special construction.................................. .....................SP(*)
(*describe special requirements on order)
Stainless Bolt, Lock Washer and Silicon Bronze Nut.....BCH

Smooth Bore, No thread.................................................SB(*)
Ground stud....................................................................GS
No locks..........................................................................NL
Machined contact surface..............................................MCS
Schedule 80 accommodation.........................................H
Short Barrel....................................................................SHB
Silicon Bronze Hardware...............................................SBHW
With out hardware shield (4x4 EHV)..............................WOS
With one hardware shield (4x4 EHV).............................W1S
With two hardware shield (4x4 EHV)..............................W2S
P
U
TERMS AND CONDITIONS OF SALE
Prices and Terms of Payment
Quotations are firm when accepted within 30 days. Payment terms are net 30 days from
date of invoice.
Transportation of Shipments
All prices are F.O.B. shipping point. Shipments over $1000.00 will be freight allowed and
prepaid to regular freight station or terminal nearest destination in U.S. except Alaska and
Hawaii. Product Design reserves the right to determine the method of transportation and
routing. When the Purchaser specifies other than the least expensive method, transportation
expense will be borne by the Purchaser.
Packaging
Product Design reserves the right to ship in standard packaging. All export or special types
of packaging are subject to additional charges.
Sales Tax
Prices do not include sales, use, excise or similar taxes. The Company reserves the right to
add tax as may be required by law.
Limitation of Liability
The Company’s liability on any claim of any kind, including negligence, for any loss or damage
resulting from this contract, from the manufacture, sale, resale, delivery, repair or use of
our equipment furnished on this contract shall in no case exceed the price invoiced on the
order. In no event shall the Company be liable for special or consequential damage.
Guarantee
Product Design warrants that its manufactured products will be free from defects in material,
workmanship and title. If it appears within one year from date of shipment that the product
does not meet the warranty specified under normal and proper use of the product, it will be
repaired or replaced at the company’s expense F.O.B. factory.
P
U
PAD SIZES
B
(TWO HOLE PAD)
 
C
(FOUR HOLE PAD)
 
 

 

D
(FOUR BY FOUR PAD)
 
 


6HP
(FOUR BY SIX PAD)

 
 


Long orientation
Standard orientation use suffix -6HPL
*The tabulated measurements throughout this catalog that do not pertain to NEMA
standards are approximate and subject to change. Please contact your local sales
agent or the factory directly when overall dimensions are critical to any particular
application. All PDU connectors are manufactured to NEMA CC1 standards.
P
U
TABLE OF CONTENTS
STD
STAN D A R D C ATA L O G 230KV & Below
TABLE OF CONTENTS
SECTION 11 B O LT E D T E R M I N A L S
CABLE TO FLAT PAD PIPE TO FLAT PAD
11-1 11-1A 11-2 11-2A

PIPE TO FLAT PAD EXPANSION UNIVERSAL CROSS CABLE TO FLAT PAD
11-2EX 11-2AEX 11-3

DOUBLE CABLE TO FLAT PAD TRIPLE CABLE TO FLAT PAD
11-4 11-4A 11-4-3COND 11-4A-3COND

CABLE TO FLAT (EYE) CABLE TO FLAT PAD (EYE)
11-5 11-6 11-7 11-8
Manufactured by: Pattern & Foundry, Inc.

STD
S TA NDAR D C ATA L O G 230KV & Below
TABLE OF CONTENTS
SECTION 11 BOLTED TERMINALS
CABLE TO FLAT PAD (EYE)
11-9 11-10
SECTION 12 B O LT E D T E E C O N N E C T O R S
PIPE TO PIPE, TEE PIPE TO ANGLE PIPE, TEE
12-1 12-1A 12-2 12-2A

PIPE TO DOUBLE PIPE PIPE TO CABLE, TEE
12-3 12-3A 12-4 12-4A

PIPE TO DOUBLE CABLE, TEE PIPE TO FLAT PAD, TEE
12-4-2T 12-4A-2T 12-5 12-5A

STD
TABLE OF CONTENTS
SECTION 12 B O LT E D T E E C O N N E C T O R S
CABLE TO CABLE, TEE CABLE TO PIPE, TEE
12-6 12-6A 12-7 12-7A

CABLE TO FLAT PAD, TEE
12-8 12-8A
SECTION 13 B O LT E D C O U P L E R S
PIPE TO PIPE PIPE TO CABLE
13-1 13-1A 13-2 13-2A

PIPE TO PIPE ELBOW PIPE TO PIPE VA ELBOW CABLE TO CABLE COUPLER
13-3 13-3A 13-3-VA & 13-3A-VA 13-4 & 13-4A

STD
TABLE OF CONTENTS
SECTION 14 B O LT E D S T U D C O N N E C T O R S
STUD TO PIPE STUD TO CABLE
14-1 14-1A 14-2 14-2A

STUD TO CABLE “+” STUD TO 2 CABLES “+” STUD TO FLAT PAD
14-2WRX 14-2WRX2 14-3 14-3A
SECTION 15 B O LT E D E X PA N S I O N T E R M I N A L S A N D C O N N E C T O R S
PIPE TO FLAT PAD PIPE TO PIPE
15-1 15-1A 15-2 15-2A

EXPANSION BUS SUPPORTS STUD TO PIPE
15-3 15-3A 15-4 15-4A

STD
SECTION 15 B O LT E D E X PA N S I O N T E R M I N A L S A N D C O N N E C T O R S
EXPANSION CONNECTORS
15-5 15-5A
SECTION 16 COMPRESSION FITTINGS

CABLE TO PAD CABLE TO PAD, A1C DOUBLE CABLE TO PAD
16-1 16-1A 16-1A-A1C 16-1A-2B

DOUBLE CABLE TO PAD, A1C CABLE TO PAD, TEE CABLE TO CABLE, TEE
16-1A-2B-A1C 16-2 16-2A 16-3 & 16-3A
SECTION 16-SW S WA G E F I T T I N G S
CABLE TO FLAT PAD DOUBLE TO FLAT PIPE TO FLAT PAD CABLE TO CABLE, TEE
16-SWC-1 16-SWC-1-2B 16-SWC-2 16-SWC-3

STD
SECTION 17 GROUND CLAMPS

CABLE TO ROD/PIPE CABLE TO FLAT BRAID TO ROD/PIPE CABLE TO POST
17-1 17-2 17-3 17-4

CABLE TO ROD/PIPE PIPE TO MULTI-CABLE, CROSS CABLE TO GROUNDING CABLE TO GROUNDING
17-5 17-5.5 17-6 17-6A

PIPE TO GROUNDING PIPE TO STUD PAD TO STUD
17-7 17-7A 17-8
SECTION 18 WELDMENT CONNECTORS

PIPE TO PAD PIPE TO PAD EX PIPE TO PIPE, TEE PIPE TO ANGLE PIPE
18-1 18-1EX 18-2 18-3

STD
SECTION 18 WELDMENT CONNECTORS

PIPE TO PIPE, VEE PIPE TO PIPE Y PIPE TO PIPE COUPLER PIPE TO PAD, TEE
18-4 18-5 18-6 18-7

PIPE TO PIPE ELBOW CABLE TO PAD (2) CABLE TO PAD PIPE TO CABLE, TEE
18-8 18-9 18-10 18-11

PIPE TO CABLE PIPE TO PIPE EX/SUPPORT PIPE TO PIPE EX PIPE TO PAD
18-12 18-13 18-14 18-15

STUD TO PIPE GROUNDING STUD INTERNAL PLUG EXTERNAL PLUG
18-16 18-17 18-18 18-19

STD
SECTION 18-SW S WA G E C O N N E C T O R S
PIPE TO FLAT PAD PIPE TO FLAT PAD-EX PIPE TO PIPE , TEE PIPE TO ANGLE PIPE, TEE
18-SW-1 18-SW-1-EX 18-SW-2 18-SW-3

PIPE TO ANGLE PIPE, VEE PIPE TO PIPE, Y PIPE TO PIPE, COUPLER PIPE TO ANGLE PIPE, TEE
18-SW-4 18-SW-5 18-SW-6 18-SW-7

PIPE TO PIPE, ELBOW EX COUPLER SUPPORT EX COUPLER PIPE TO PIPE EX TERMINAL TO PIPE
18-SW-8 18-SW-13 18-SW-14 18-SW-15

GROUNDING STUD END BELL
18-SW-17 18-SW-19

STD
SECTION 19 BUS SUPPORTS

PEDESTAL STYLE OPEN BASE
19-1 19-1A 19-2 19-2A

SINGLE RING HOOK-ON OPEN BASE WELD
19-3 19-3A 19-4 19-5

CABLE BUS SUPPORTS DOUBLE CABLE BUS SUPPORTS
19-6 19-6A 19-6-2CND 19-6-2CND

VERTICAL BUS WELD VERTICAL BUS BOLTED COUPLER SUPPORTS
19-7 19-8A 19-9

STD
SECTION 19 BUS SUPPORTS

BOLT CIRCLE HEIGHT
COUPLER SUPPORTS SLIDING COUPLER SUPPORTS ADAPTER
19-9A 19-10 19-10A 19-11
SECTION 110 PA R A L L E L C O N N E C T O R S
CABLE TO CABLE CABLE TO CABLE U-BOLT STYLE
110-1 110-1A 110-1U

CABLE SPACER CABLE SPACER, TEE
110-1CS 110-1CS 110-CST 110-CST
SECTION 111 CORONA BELLS AND FLEXIBLE BRAIDS

INTERNAL CORONA BELLS EXTERNAL CORONA BELLS FLEXIBLE TINNED BRAIDS
111-1 111-1 111-2 111-2 111-3

BRONZE TERMINAL, SECTION
CABLE TO FLAT PAD 11-1

Cast of copper alloy for high
conductivity and natural resistance 

to corrosion and stress, the type
TU-terminals includes bolts, nuts,
and lock washers made of silicon 
bronze for clamping strength and

durability.
Bolt heads are captivated to facilitate
single-wrench installation.
Side-formed NEMA pads are standard.


Wide Range denoted by: *

 
Special tongue features will be supplied, B C 

D 

provided the catalog number is followed 


by the proper suffix. 

   
Example: A 45 degree tongue for number 

 
11-101, should appear as 11-101-45.
CATALOG STYLE CABLE SIZE MCM DIMENSIONS IN INCHES

NUMBER PAD AWG MIN. MAX A B C D K
11-101* B 8 250 5 11/16 2 3/4 3/8 1/2 3/8
11-104* B 8 600 6 1/4 3 1/8 3/8 3/4 3/8
11-105* C 8 600 6 1/8 3 1/8 3/8 3/4 3/8
11-106* D 8 600 7 1/8 3 1/8 3/8 3/4 3/8
11-110* B 4/0 1000 7 1/8 3 3/4 5/8 7/8 1/2
11-111* C 4/0 1000 7 3 3/4 5/8 1 1/2
11-112* D 4/0 1000 8 3 3/4 5/8 1 1/2
11-113 B 1000 1500 7 1/2 4 1/4 1/2 1 1/4 1/2
11-114 C 1000 1500 7 1/2 4 1/4 1/2 1 1/4 1/2
11-115 D 1000 1500 8 3/4 4 1/4 3/4 1 1/4 1/2
11-116 B 1500 2000 8 3/4 5 1/8 3/4 1 5/8 1/2
11-117 C 1500 2000 8 3/4 5 1/8 1 1 5/8 1/2
11-118 D 1500 2000 9 3/4 5 1/8 1 1 5/8 1/2
P
U
SECTION ALUMINUM TERMINAL,
11-1A CABLE TO FLAT PAD
Cast of a lightweight aluminum

alloy, the type ATU terminals include
 clamping hardware made of high-

 tensile aluminum.
Bolt heads are captivated to facilitate

Side-formed NEMA pads are standard.

 

Special tongue features will be supplied,
provided the catalog number is followed
by the proper suffix.
Example:
A 90 degree tongue for a 11-126 should
appear as 11-126-90.
B C D 
 



   
 

ALUMINUM ACSR
CATALOG PAD DIMENSIONS IN INCHES
NUMBER STYLE CABLE SIZE MCM CABLE SIZE MCM
AWG MIN. MAX AWG MIN. MAX A B C D K
11-125* B 4 954 4 795 7 1/4 4 5/8 1 3/4 1/2
11-126* C 4 954 4 795 7 4 5/8 1 3/4 1/2
11-127* D 4 954 4 795 8 3/8 4 5/8 1 3/4 1/2
11-131 B 900 1272 715.5 1113 7 3 5/8 5/8 3 3/8 1/2
11-132 C 900 1272 715.5 1113 7 3 5/8 5/8 3 3/8 1/2
11-133 D 900 1272 715.5 1113 8 1/4 3 5/8 5/8 3 3/4 1/2
11-134 B 1272 1590 1113 1272 7 5/8 4 1/4 5/8 2 1/2
11-135 C 1272 1590 1113 1272 7 5/8 4 1/4 5/8 2 1/4 1/2
11-136 D 1272 1590 1113 1272 8 7/8 4 1/4 5/8 2 1/4 1/2
11-137 B 1590 2000 1272 1590 7 7/8 4 1/2 5/8 2 3/8 5/8
11-138 C 1590 2000 1272 1590 7 13/16 4 1/2 5/8 2 3/8 5/8
11-139 D 1590 2000 1272 1590 8 3/4 4 1/2 5/8 2 3/8 5/8
P
U
PIPE TO FLAT PAD 11-2
PIPE DIMENSIONS IN INCHES

CATALOG PAD
SIZE
NUMBER STYLE A B C D E K
IPS
11-140 B 1/2 5 3 1/2 3/8 2 1/2 3/8
11-141 C 1/2 5 3 1/2 3/8 2 1/2 3/8
11-142 D 1/2 6 3 1/2 3/8 2 1/2 3/8
11-143 B 3/4 6 2 1/2 1 3/8 2 1/2 1/2
11-144 C 3/4 6 2 1/2 1 3/8 3 3/8 1/2
11-145 D 3/4 7 2 1/2 1 3/8 3 3/8 1/2
11-146 B 1 5 3/4 3 3/16 1 1/2 3 1/2 1/2
Cast of a high conductivity copper
alloy, the type T pipe connector
11-147 C 1 6 1/2 3 3/16 1 1/4 1/2 3 7/8 1/2
also includes bolts, nuts, and lock
11-148 D 1 7 1/2 3 3/16 1 1/4 5/8 3 7/8 1/2 washers made of high strength
11-149 B 1 1/4 6 1/4 3 1/8 1 1/2 5/8 4 1/4 1/2 silicon bronze.
11-150 C 1 1/4 6 5/8 3 1/8 1 1/2 5/8 4 3/8 1/2
Bolt heads are captivated to permit
11-151 D 1 1/4 7 1/4 3 1/8 1 1/2 5/8 4 3/8 1/2
11-152 B 1 1/2 6 3/4 3 1/16 1 5/8 5/8 4 3/8 1/2
Side-formed NEMA pads are
11-153 C 1 1/2 6 3/4 3 1/16 1 5/8 5/8 4 1/2 1/2
standard.
11-154 D 1 1/2 7 1/8 3 1/16 1 5/8 5/8 4 1/2 1/2
11-155 B 2 6 3/8 3 1/8 1 3/4 5/8 5 1/2 1/2
11-156 C 2 6 3/8 3 1/8 1 3/4 5/8 5 1/2 1/2
11-157 D 2 7 3/8 3 1/8 1 3/4 5/8 5 1/2 1/2

11-158 B 2 1/2 6 3/4 4 2 1/8 5/8 5 5/8 5/8
11-159 C 2 1/2 6 3/4 4 2 1/8 5/8 5 5/8 5/8 

11-160 D 2 1/2 8 1/4 4 2 1/8 3/4 6 1/4 5/8
11-161 B 3 7 1/8 3 15/16 2 1/2 5/8 6 7/8 5/8 Special tongue features will be
11-162 C 3 7 1/8 3 15/16 2 1/2 7/8 6 7/8 5/8 supplied, provided the catalog
11-163 D 3 8 1/16 3 15/16 2 1/2 5/8 6 7/8 5/8 number is followed by the
11-164 B 3 1/2 7 1/8 3 3/4 2 1/2 3/4 7 3/8 5/8 proper suffix.
11-165 C 3 1/2 7 1/8 3 3/4 2 1/2 3/4 7 3/8 5/8 Example: A center-formed tongue
11-166 D 3 1/2 8 1/8 3 3/4 2 1/2 2 1/2 7 3/8 5/8 for catalog number 11-140 should
11-167 B 4 9 1/4 4 5/8 3 1/2 2/4 9 1/2 5/8 appear as 11-140-CF.
A 45 degree angle tongue for the
11-168 C 4 9 1/4 4 5/8 3 1/2 1 9 1/2 5/8
same catalog number would be
11-169 D 4 10 1/4 4 5/8 3 1/2 1 9 1/2 5/8
written as 11-140-45.
11-170 B 4 1/2 9 1/4 4 3/4 3 1/2 3/4 9 1/2 5/8

11-171 C 4 1/2 9 1/4 4 3/4 3 1/2 1 9 1/2 5/8  
11-172 D 4 1/2 1 1/4 4 3/4 3 1/2 1 9 1/2 5/8
11-173 B 5 8 1/2 5 1/16 3 1/2 1 9 1/2 5/8
11-174 C 5 8 1/2 5 1/16 3 1/2 1 9 1/2 5/8 
11-175 D 5 9 1/2 5 1/16 3 1/2 1 9 1/2 5/8

11-176 B 6 9 3/4 6 4 3/8 1 1/4 11 5/8
11-177 C 6 9 3/4 6 4 3/8 1 1/4 11 5/8
11-178 D 6 10 3/4 6 4 3/8 1 1/4 11 5/8 

P
U
SECTION ALUMINUM TERMINALS,
11-2A PIPE TO FLAT PAD

CATALOG PAD
SIZE
IPS
11-179 B 1/2 5 4 1/2 3/8 2 7/8 1/2
11-180 C 1/2 5 4 1/2 3/8 2 7/8 1/2
11-181 D 1/2 6 4 1/2 3/8 2 7/8 1/2
11-182 B 3/4 6 1/16 2 3/4 1 1/2 3 3/8 1/2
11-183 C 3/4 6 1/16 2 3/4 1 1/2 3 3/8 1/2
 11-184 D 3/4 7 1/16 2 3/4 1 1/2 3 3/8 1/2
 
11-185 B 1 6 1/2 3 3/16 1 3/16 1/2 3 7/8 1/2
11-186 C 1 6 7/16 3 3/16 1 1/4 1/2 3 7/8 1/2
11-187 D 1 7 7/16 3 3/16 1 1/4 1/2 3 7/8 1/2
 11-188 B 1 1/4 6 1/2 3 1/8 1 1/2 1/2 4 5/16 1/2
11-189 C 1 1/4 6 1/2 3 1/8 1 1/2 1/2 4 5/16 1/2
11-190 D 1 1/4 7 1/2 3 1/8 1 1/2 1/2 4 5/16 1/2
11-191 B 1 1/2 6 5/16 3 1/16 1 1/2 5/8 4 3/8 1/2
11-192 C 1 1/2 6 5/16 3 1/16 1 1/2 5/8 4 3/8 1/2
 11-193 D 1 1/2 7 5/16 3 1/16 1 1/2 5/8 4 3/8 1/2

11-194 B 2 6 1/2 3 1/8 1 3/4 5/8 5 1/8 1/2
11-195 C 2 6 1/2 3 1/8 1 3/4 5/8 5 1/8 1/2
Cast of a high conductivity aluminum 11-196 D 2 7 7/16 3 1/8 1 3/4 5/8 5 1/8 1/2
alloy, the type AT pipe connector 11-197 B 2 1/2 7 3/8 4 2 5/8 6 1/8 5/8
includes bolts, nuts, and lock wash- 11-198 C 2 1/2 7 1/8 4 2 5/8 6 1/8 5/8
ers made of high tensile aluminum.
11-199 D 2 1/2 8 1/4 4 2 5/8 6 1/8 5/8
Bolt heads are captivated to permit 11-200 B 3 7 5/16 3 15/16 2 1/2 5/8 7 5/8
single-wrench installation. 11-201 C 3 7 1/8 3 15/16 2 1/2 5/8 7 5/8
Side-formed NEMA pads are standard. 11-202 D 3 8 1/8 3 15/16 2 1/2 5/8 7 5/8
11-203 B 3 1/2 7 3 3/4 2 5/8 3/4 7 1/2 5/8
11-204 C 3 1/2 7 3 3/4 2 5/8 3/4 7 1/2 5/8
11-205 D 3 1/2 8 3 3/4 2 5/8 3/4 7 1/2 5/8
11-206 B 4 7 7/8 4 5/8 3 3/4 8 1/2 5/8

11-207 C 4 7 7/8 4 5/8 3 3/4 8 1/2 5/8

 11-208 D 4 8 7/8 4 5/8 3 3/4 8 1/2 5/8

11-209 B 4 1/2 7 7/8 4 3/4 3 3/4 9 1/8 5/8
Special tongue features will be 11-210 C 4 1/2 7 7/8 4 3/4 3 3/4 9 1/8 5/8
provided if designated by the addition 11-211 D 4 1/2 8 7/8 4 3/4 3 3/4 9 1/8 5/8
of a suffix to the catalog number. 11-212 B 5 8 1/2 5 1/16 3 1/2 1 9 5/8 5/8
Example: A center-formed tongue 11-213 C 5 8 1/2 5 1/16 3 1/2 1 9 5/8 5/8
for catalog number 11-179 should 11-214 D 5 9 1/2 5 1/16 3 1/2 1 9 5/8 5/8
appear as 11-179-CF. 11-215 B 6 9 3/4 6 4 1/4 1 1/4 11 5/8
A 45 degree angle tongue for the
11-216 C 6 9 3/4 6 4 1/4 1 1/4 11 5/8
same catalog number would be
11-217 D 6 10 3/4 6 4 1/4 1 1/4 11 5/8
written 11-179-45.
P
U
BRONZE EXPANSION TERMINAL, SECTION
PIPE TO FLAT PAD 11-2EX

CATALOG PAD
SIZE
IPS
11-140-EX B 1/2 5 3 1/2 3/8 2 1/4 3/8
11-141-EX C 1/2 5 3 1/2 3/8 2 1/4 3/8
11-142-EX D 1/2 6 3 1/2 3/8 2 1/4 3/8
11-143-EX B 3/4 6 2 1/2 1 3/8 3 3/8 1/2
11-144-EX C 3/4 6 2 1/2 1 3/8 3 3/8 1/2
11-145-EX D 3/4 7 2 1/2 1 3/8 3 3/8 1/2
11-146-EX B 1 5 3/4 3 3/16 1 1/2 3 7/8 1/2
11-147-EX C 1 6 1/2 3 3/16 1 1/4 1/2 3 7/8 1/2
11-148-EX D 1 7 1/2 3 3/16 1 1/4 5/8 3 7/8 1/2
11-149-EX B 1 1/4 6 1/4 3 1/8 1 1/2 5/8 4 5/16 1/2
11-150-EX C 1 1/4 6 1/4 3 1/8 1 1/2 5/8 4 5/16 1/2
11-151-EX D 1 1/4 7 1/4 3 1/8 1 1/2 5/8 4 5/16 1/2 EX
11-152-EX B 1 1/2 6 1/8 3 1/16 1 1/2 5/8 4 3/8 1/2

11-153-EX C 1 1/2 6 1/8 3 1/16 1 1/2 5/8 4 3/8 1/2
11-154-EX D 1 1/2 7 1/8 3 1/16 1 1/2 5/8 4 3/8 1/2
11-155-EX B 2 6 3/8 3 1/8 1 3/4 5/8 5 1/8 1/2 
11-156-EX C 2 6 3/8 3 1/8 1 3/4 5/8 5 1/8 1/2

11-157-EX D 2 7 3/8 3 1/8 1 3/4 5/8 5 1/8 1/2
EX90
11-159-EX C 2 1/2 6 3/4 4 2 5/8 6 1/8 5/8
11-160-EX D 2 1/2 8 1/4 4 2 5/8 6 1/8 5/8 Cast of a high conductivity
11-162-EX C 3 7 1/8 3 15/16 2 1/2 7/8 7 5/8 copper alloy, the type TEX pipe
11-163-EX D 3 8 1/16 3 15/16 2 1/2 5/8 7 5/8 connector includes bolts, nuts,
11-165-EX C 3 1/2 7 1/8 3 3/4 2 1/2 3/4 7 1/2 5/8
and lock washers made of high
strength silicon bronze.
11-166-EX D 3 1/2 8 1/8 3 3/4 2 1/2 2 1/2 7 1/2 5/8
11-168-EX C 4 9 1/4 4 5/8 3 1/2 1 8 1/2 5/8 Bronze pad surface is coated
with contact sealant and bolted
11-169-EX D 4 10 1/4 4 5/8 3 1/2 1 8 1/2 5/8
to laminated shunt at factory.
11-171-EX C 4 1/2 9 1/4 4 3/4 3 1/2 1 9 1/8 5/8
11-172-EX D 4 1/2 1 1/4 4 3/4 3 1/2 1 9 1/8 5/8 Use suffix EX90 for 90 degree
expansion terminal as illustrated.
11-174-EX C 5 8 1/2 5 1/16 3 1/2 1 9 5/8 5/8
11-175-EX D 5 9 1/2 5 1/16 3 1/2 1 9 5/8 5/8 Example: 11-150-EX90
11-177-EX C 6 9 3/4 6 4 3/8 1 1/4 11 5/8 
11-178-EX D 6 10 3/4 6 4 3/8 1 1/4 11 5/8  


P
U
SECTION ALUMINUM EXPANSION TERMINAL,
11-2AEX PIPE TO FLAT PAD
TUBE DIMENSIONS IN INCHES

CATALOG PAD
SIZE
IPS
11-179-EX B 1/2 5 4 1/2 3/8 2 7/8 1/2
11-180-EX C 1/2 5 4 1/2 3/8 2 7/8 1/2
11-181-EX D 1/2 6 4 1/2 3/8 2 7/8 1/2
11-182-EX B 3/4 6 1/16 2 3/4 1 1/2 3 3/8 1/2
11-183-EX C 3/4 6 1/16 2 3/4 1 1/2 3 3/8 1/2
11-184-EX D 3/4 7 1/16 2 3/4 1 1/2 3 3/8 1/2
11-185-EX B 1 6 1/2 3 3/16 1 3/16 1/2 3 7/8 1/2
11-186-EX C 1 6 7/16 3 3/16 1 1/4 1/2 3 7/8 1/2
EX 11-187-EX D 1 7 7/16 3 3/16 1 1/4 1/2 3 7/8 1/2
11-188-EX B 1 1/4 6 1/2 3 1/8 1 1/2 1/2 4 5/16 1/2

11-189-EX C 1 1/4 6 1/2 3 1/8 1 1/2 1/2 4 5/16 1/2
11-190-EX D 1 1/4 7 1/2 3 1/8 1 1/2 1/2 4 5/16 1/2
 11-191-EX B 1 1/2 6 5/16 3 1/16 1 1/2 5/8 4 3/8 1/2
11-192-EX C 1 1/2 6 5/16 3 1/16 1 1/2 5/8 4 3/8 1/2
11-193-EX D 1 1/2 7 5/16 3 1/16 1 1/2 5/8 4 3/8 1/2
EX90
11-194-EX B 2 6 1/2 3 1/8 1 3/4 5/8 5 1/8 1/2
Cast of a high conductivity aluminum 11-195-EX C 2 6 1/2 3 1/8 1 3/4 5/8 5 1/8 1/2
alloy, the type ATEX pipe connector 11-196-EX D 2 7 7/16 3 1/8 1 3/4 5/8 5 1/8 1/2
also includes bolts, nuts, and lock 11-198-EX C 2 1/2 7 1/8 4 2 5/8 6 1/8 5/8
washers made of high tensile 11-199-EX D 2 1/2 8 1/4 4 2 5/8 6 1/8 5/8
aluminum for durability and 11-201-EX C 3 7 1/8 3 15/16 2 1/2 5/8 7 5/8
clamping efficiency. 11-202-EX D 3 8 1/8 3 15/16 2 1/2 5/8 7 5/8
Aluminum pad surface is coated 11-204-EX C 3 1/2 7 3 3/4 2 5/8 3/4 7 1/2 5/8
with contact sealant and bolted to 11-205-EX D 3 1/2 8 3 3/4 2 5/8 3/4 7 1/2 5/8
laminated shunt at the factory. 11-208-EX D 4 8 7/8 4 5/8 3 3/4 8 1/2 5/8
Preformed copper laminated shunt
11-211-EX D 4 1/2 8 7/8 4 3/4 3 3/4 9 1/8 5/8
has tin plated contacts.
11-214-EX D 5 9 1/2 5 1/16 3 1/2 1 9 5/8 5/8
Use suffix EX90 for 90 degree 11-217-EX D 6 10 3/4 6 4 1/4 1 1/4 11 5/8
expansion terminal as illustrated.
Example: 11-179-EX90

 


P
U
UNIVERSAL CROSS CONNECTOR 11-3

In addition to covering a wide
cable range, the versatile
type UCT connector features
front and side entrances for
adaptability in the field.
It utilizes a high conductivity
copper alloy with clamping
 
hardware made of high
strength silicon bronze.
Bolt heads are captivated to
permit single-wrench installation.

B C D 
 



   
 

Wide Range
CABLE SIZE DIMENSIONS IN INCHES

CATALOG PAD
NUMBER STYLE AWG MCM
A B C K
MIN. MAX.
11-218 B 2 800 6 2 3/4 1/2 3/8
11-219 C 2 800 6 2 3/4 1/2 3/8
11-220 D 2 800 6 3/4 2 3/8 1/2 3/8
11-221 B 4/0 1500 6 3/8 3 3/8 1/2 1/2
11-222 C 4/0 1500 6 3/8 3 3/8 1/2 1/2
11-223 D 4/0 1500 7 3/8 3 3/8 1/2 1/2
11-224 B 1000 2000 7 1/8 3 5/8 5/8 1/2

11-225 C 1000 2000 7 1/8 3 5/8 5/8 1/2
11-226 D 1000 2000 8 1/8 3 5/8 5/8 1/2
P
U
SECTION BRONZE TERMINAL,
11-4 DOUBLE CABLE TO FLAT PAD
Bronze straight bolt terminals are supplied with

silicon bronze bolts, nuts and lockwashers.
Bolt heads are captivated in casting to facilitate
single wrench installation.
Side-formed pads with NEMA hole spacing
are standard.
provided the catalog number is followed by
the proper suffix.
Example:
A 90 degree angle terminal for catalog number
11-230 should appear as 11-230-90.


Wide Range

CATALOG PAD
NUMBER STYLE AWG MCM
A B C D K
MIN. MAX.
11-230 B 8 600 6 3/8 3 1/8 1/2 1 5/8 3/8
11-231 C 8 600 6 3/8 3 1/8 1/2 1 5/8 3/8
11-232 D 8 600 7 3/4 3 1/8 1/2 1 5/8 3/8
11-233 B 4/0 1000 71/8 3 3/4 5/8 2 1/2
11-234 C 4/0 1000 7 1/8 3 3/4 5/8 2 1/2
11-235 D 4/0 1000 7 3/4 3 3/4 5/8 3 3/8 1/2
11-239 B 1000 2000 8 3/4 5 1/4 5/8 3 3/4 1/2
11-240 C 1000 2000 8 3/4 5 1/4 5/8 3 3/4 1/2
11-241 D 1000 2000 9 3/4 5 1/4 5/8 3 3/4 1/2
P
U
ALUMINUM TERMINAL, SECTION
DOUBLE CABLE TO FLAT PAD 11-4A
Aluminum terminals are supplied with
aluminum bolts, nuts and lockwashers.
Bolt heads are captivated in casting
to facilitate single wrench installation.
Side-formed pads with NEMA hole
spacing are standard.
Example:
A 90 degree angle terminal for catalog
number 11-248 should appear
as 11-248-90.


ALUMINUM ACSR
DIMENSIONS IN INCHES
CATALOG PAD CABLE SIZE CABLE SIZE
NUMBER STYLE AWG or MCM AWG or MCM
A B C D K
MIN. MAX. MIN. MAX.
11-248* B 4 954 4 795 7 3/8 4 5/8 3 1/4 1/2
11-249* C 4 954 4 795 7 1/8 4 5/8 3 1/4 1/2
11-250* D 4 954 4 795 8 3/4 4 5/8 3 1/4 1/2
11-251 B 900 1272 715.5 1113 7 3 5/8 5/8 3 1/2 1/2
11-252 C 900 1272 715.5 1113 7 3 5/8 5/8 3 1/2 1/2
11-253 D 900 1272 715.5 1113 8 3 5/8 5/8 3 1/2 1/2
11-254 B 1272 1590 1113 1272 7 1/2 4 1/4 5/8 3 1/2 1/2
11-255 C 1272 1590 1113 1272 7 5/8 4 1/4 5/8 3 1/2 1/2
11-256 D 1272 1590 1113 1272 8 3/4 4 1/4 3/4 3 1/2 1/2
11-260 B 1590 2000 1272 1590 7 3/4 4 1/2 5/8 4 5/8
11-261 C 1590 2000 1272 1590 7 3/4 4 1/2 5/8 4 5/8
11-262 D 1590 2000 1272 1590 9 3/8 4 1/2 3/4 4 3/4
P
U
SECTION BRONZE TERMINALS, TRIPLE CABLE
11-4-3COND TO FLAT PAD
Bronze straight bolt terminals are

supplied with silicon bronze bolts, nuts,
and lockwashers.
Bolt heads are captivated in casting
to facilitate single wrench installation.
Example: A 90 degree angle terminal
for catalog number 11-230-3COND
should appear as 11-230-90-3COND.



PAD
CATALOG NUMBER AWG MCM
STYLE A B C K
MIN. MAX.
11-230-3COND * B 8 600 7 1/2 3 1/8 1/2 3/8
11-231-3COND * C 8 600 7 1/2 3 1/8 1/2 3/8
11-232-3COND * D 8 600 8 1/2 3 1/8 1/2 3/8
11-233-3COND * B 4/0 1000 8 3 3/4 5/8 1/2
11-234-3COND * C 4/0 1000 8 3 3/4 5/8 1/2
11-235-3COND * D 4/0 1000 9 3 3/4 5/8 1/2
11-239-3COND B 1000 2000 8 3/4 4 1/2 5/8 1/2
11-240-3COND C 1000 2000 8 3/4 4 1/2 5/8 1/2
11-241-3COND D 1000 2000 9 3/4 4 1/2 5/8 1/2
P
U
ALUMINUM TERMINALS, SECTION
TRIPLE CABLE TO FLAT PAD 11-4A-3COND
Aluminum terminals are supplied with

aluminum bolts, nuts and lockwashers.
Bolt heads are captivated in casting to
facilitate single wrench installation.
Example: A 90 degree angle terminal
for catalog number 11-248-3COND
should appear as 11-248-3COND-90.
ALUMINUM ACSR
PAD CABLE SIZE CABLE SIZE
CATALOG NUMBER
STYLE AWG MCM AWG MCM
A B C K
MIN. MAX. MIN. MAX.
11-248-3COND* B 4 954 4 795 8 4 5/8 1/2
11-249-3COND* C 4 954 4 795 8 4 5/8 1/2
11-250-3COND* D 4 954 4 795 9 4 5/8 1/2
11-251-3COND B 900 1272 715.5 1113 8 1/4 3 5/8 5/8 1/2
11-252-3COND C 900 1272 715.5 1113 8 1/4 3 5/8 5/8 1/2
11-253-3COND D 900 1272 715.5 1113 9 1/4 3 5/8 3/4 1/2
11-254-3COND B 1272 1590 1113 1272 8 7/8 4 1/4 3/4 1/2
11-255-3COND C 1272 1590 1113 1272 8 7/8 4 1/4 3/4 1/2
11-256-3COND D 1272 1590 1113 1272 9 7/8 4 1/4 3/4 1/2
11-260-3COND B 1590 2000 1272 1590 8 3/8 4 1/2 7/8 5/8
11-261-3COND C 1590 2000 1272 1590 8 3/8 4 1/2 7/8 5/8
11-262-3COND D 1590 2000 1272 1590 9 3/8 4 1/2 7/8 5/8
P
U
SECTION BRONZE BOLTED EYE TERMINAL,
11-5 SINGLE CABLE TO FLAT
DIMENSIONS IN
CABLE SIZE MAX FLAT
CATALOG NUM- INCHES
BAR
BER AWG MCM
A B C THICKNESS
MIN. MAX.
TT-101A-1 8 250 1 1/2 4 1/4 1 5/8 1 1/2
TT-102A-1 1/0 500 1 3/4 3 3/4 1 1/4 1/2
TT-103A-1 500 1000 2 1/4 4 1/2 2 1
Cast of a high conductivity copper alloy, these terminals are ideal for connecting
copper cable directly to a flat pad.
Designed for grounding or power applications.
Eye bolt terminals are supplied with silicon bronze nuts and lock washers.
P
U
BRONZE BOLTED EYE TERMINAL, SECTION
DOUBLE OR SINGLE CABLE TO FLAT 11-6
CABLE SIZE DIMENSIONS IN INCHES MAX FLAT

CATALOG NUMBER AWG MCM BAR
A B C D THICKNESS
MIN. MAX.
TT-101A-2 8 250 3 1/4 4 1/4 1 5/8 1 3/4 1 1/2
TT-102A-2 1/0 500 3 1/8 3 3/4 1 1/4 1 3/4 1/2
TT-103A-2* 500 1000 4 1/4 4 1/2 2 2 1/4 1
* One way cup.
Cast of a high conductivity copper alloy, these terminals are ideal for connecting
one or two copper cables directly to a flat pad.
Designed for grounding or power applications.
Eye bolt terminals are supplied with silicon bronze nuts and lock washers.
P
U
SECTION BRONZE BOLTED EYE TERMINAL,
11-7 SINGLE CABLE TO FLAT PAD
Cast of a high conductivity CABLE SIZE DIMENSIONS IN INCHES

copper alloy, these single PAD
eyebolt terminals provide an STYLE A B C D K
MIN. MAX.
ideal connection between
one copper cable and a 11-101-1EY B 8 250 5 1/4 1 3/4 3/8 1 1/2 4 1/4
side formed flat pad. 11-104-1EY B 1/0 500 5 3/4 2 1/2 1 7/8 4 1/4
Multiple pad sizes available. 11-105-1EY C 1/0 500 5 3/4 2 1/2 1 7/8 4 1/4
11-110-1EY B 500 1000 6 1/8 2 1/2 1/2 2 3/8 4 1/4
Eye bolt terminals are sup- 11-111-1EY C 500 1000 6 1/8 2 1/2 1/2 2 3/8 4 1/4
plied with silicon bronze 11-113-1EY B 1000 1500 5 1/2 2 1/2 1/2 2 1/4 4 1/4
nuts and lock washers. 11-114-1EY C 1000 1500 5 1/2 2 1/2 1/2 2 1/4 4 1/4
P
U
BRONZE BOLTED DOUBLE EYE TERMINAL, SECTION
DOUBLE OR SINGLE CABLE TO FLAT PAD 11-8
C
K
CABLE SIZE DIMENSIONS IN INCHES Cast of a high conductivity

PAD copper alloy, these single
STYLE A B C D K eyebolt terminals allow for
MIN. MAX. a superlative connection
11-101-2EY B 8 250 2 6 7/8 3/8 3 3/8 4 1/4 between one or two copper
11-104-2EY B 1/0 500 2 7 3/4 1/2 4 4 1/4 cables and a side formed
flat pad.
11-105-2EY C 1/0 500 3 7 3/4 1/2 4 4 1/4
11-110-2EY B 500 1000 2 8 3/8 1/2 4 1/2 4 1/4 Multiple pad sizes available.
11-111-2EY C 500 1000 3 8 3/8 1/2 4 1/2 4 1/4 Eye bolt terminals are sup-
11-113-2EY B 1000 1500 2 9 1/2 4 3/4 4 1/4 plied with silicon bronze
11-114-2EY C 1000 1500 3 9 1/2 4 3/4 4 1/4 nuts and lock washers.
11-116-2EY B 1500 2000 2 9 7/8 1/2 5 4 1/4
11-117-2EY C 1500 2000 3 9 7/8 1/2 5 4 1/4
P
U
SECTION BRONZE BOLTED DOUBLE EYE TERMINAL,



alloy, these double eyebolt terminals
allow for a superlative connection
between two copper cables and a 
side formed flat pad. 
Multiple pad sizes available.
Eye bolt terminals are supplied with

silicon bronze nuts and lock washers.

PAD
STYLE A B C K
MIN. MAX.
11-230-2EY B 1/0 500 6 1/2 3 1/2 4 1/4
11-231-2EY C 1/0 500 6 1/2 3 1/2 4 1/4
11-232-2EY D 1/0 500 7 1/2 3 1/2 4 1/4
11-233-2EY B 500 1000 7 1/2 3 3/4 3/4 4 1/4
11-234-2EY C 500 1000 7 1/2 3 3/4 3/4 4 1/4
11-235-2EY D 500 1000 8 1/2 3 3/4 3/4 4 1/4
P
U
BRONZE BOLTED DOUBLE EYE TERMINAL, SECTION
TRIPLE CABLE TO FLAT PAD 11-10




alloy, these triple eyebolt terminals
allow for a superlative connection
between three copper cables and
a side formed flat pad.


 Eye bolt terminals are supplied with
silicon bronze nuts and lock washers.
CABLE SIZE  DIMENSIONS IN INCHES

PAD
   

STYLE A B C D E K
MIN. MAX.
11-231-3EY C 1/0 500 6 1/2 3 1/2 1 1/2 5 1/4 4 1/4
11-232-3EY D 1/0 500 6 1/2 3 1/2 1 1/2 5 1/4 4 1/4
11-234-3EY C 500 1000 7 2 7/8 3/4 1 1/2 5 1/8 4 1/4
11-235-3EY D 500 1000 8 2 7/8 3/4 1 1/2 5 1/8 4 1/4
P
U
BRONZE TEE CONNECTORS, SECTION
PIPE RUN TO PIPE TAP 12-1
BRONZE TEE CONNECTORS,

PIPE RUN TO PIPE TAP
CATALOG IPS DIMENSIONS IN INCHES
IPS TAP
NUMBER MAIN A B C K
12-101 1/2 1/2 4 3 3 3/8
12-102 3/4 1/2 4 3 2 3/4 3/8
12-103 3/4 3/4 4 3/8 2 1/2 3 3/8 

12-104 1 1/2 4 1/2 3 3 3/16 1/2 & 3/8
12-105 1 3/4 4 5/8 2 3/4 3 3/16 1/2
12-106 1 1 7 1/4 3 3/16 3 3/16 1/2 

12-107 1 1/4 1/2 7 1/2 3 3 1/8 1/2 & 3/8
12-108 1 1/4 3/4 7 1/4 2 3/4 3 1/8 1/2 
12-109 1 1/4 1 7 3/8 3 3/16 3 1/8 1/2
12-110 1 1/4 1 1/4 7 5/8 3 1/8 3 1/8 1/2 
12-111 1 1/2 1/2 7 3/8 3 3 1/16 1/2 & 3/8
12-112 1 1/2 3/4 7 3/4 2 3/4 3 1/16 1/2
12-113 1 1/2 1 5 5/8 3 3/16 3 1/16 1/2
12-114 1 1/2 1 1/4 7 3/4 3 1/8 3 1/16 1/2
12-115 1 1/2 1 1/2 7 3/4 3 1/16 3 1/16 1/2
12-116 2 1/2 7 1/8 3 3 1/8 1/2 & 3/8
12-117 2 3/4 5 3/4 2 3/4 3 1/8 1/2 Made of a copper alloy
12-118 2 1 8 1/2 3 3/16 3 1/8 1/2 for high conductivity and
12-119 2 1 1/4 8 5/8 3 1/8 3 1/8 1/2 natural resistance to
12-120 2 1 1/2 8 7/8 3 1/16 3 1/8 1/2 corrosion and stress, the
12-121 2 2 8 1/4 3 1/8 3 1/8 1/2 Type PTP connector joins
12-122 2 1/2 1/2 9 3 4 5/8 & 3/8 a pipe tap to the main.
12-123 2 1/2 3/4 9 2 3/4 4 5/8 & 1/2 Bolts, nuts, and
12-124 2 1/2 1 9 1/2 3 3/16 4 5/8 & 1/2 lockwashers are
12-125 2 1/2 1 1/4 10 3/8 3 1/8 4 5/8 & 1/2 silicon bronze for clamping
12-126 2 1/2 1 1/2 6 3/4 3 1/16 4 5/8 & 1/2 strength and resistance to
12-127 2 1/2 2 9 5/8 3 1/8 4 5/8 & 1/2 corrosion. All bolt heads
12-128 2 1/2 2 1/2 7 3 3 5/8 are recessed for
12-129 3 1/2 9 3/4 3 3 15/16 5/8 & 3/8 single-wrench installation.
12-130 3 3/4 9 3/4 2 3/4 3 15/16 5/8 & 1/2
12-131 3 1 10 1/8 3 3/16 3 15/16 5/8 & 1/2
12-132 3 1 1/4 10 3/8 3 1/8 3 15/16 5/8 & 1/2
12-133 3 1 1/2 10 1/4 3 1/16 3 15/16 5/8 & 1/2
12-134 3 2 10 1/2 3 1/8 3 15/16 5/8 & 1/2
12-135 3 2 1/2 11 1/2 4 3 15/16 5/8
12-136 3 3 11 3/8 3 15/16 3 15/16` 5/8 Continued on next page
P
U
SECTION BRONZE TEE CONNECTORS,
12-1 PIPE RUN TO PIPE TAP, continued
CATALOG DIMENSIONS IN INCHES

IPS MAIN IPS TAP
NUMBER A B C K
12-137 3 1/2 1/2 10 1/4 3 3 3/4 5/8 & 3/8
12-138 3 1/2 3/4 10 1/4 2 3/4 3 3/4 5/8 & 1/2
12-139 3 1/2 1 11 1/8 3 3/16 3 3/4 5/8 & 1/2
12-140 3 1/2 1 1/4 11 1/8 3 1/16 3 3/4 5/8 & 1/2
12-141 3 1/2 1 1/2 11 1/8 3 1/8 3 3/4 5/8 & 1/2
12-142 3 1/2 2 11 1/8 3 1/8 3 3/4 5/8 & 1/2
12-143 3 1/2 2 1/2 11 5/8 4 3 3/4 5/8
12-144 3 1/2 3 11 5/8 3 15/16 3 3/4 5/8
12-145 3 1/2 3 1/2 11 5/8 3 3/4 3 3/4 5/8
12-146 4 1/2 11 1/2 3 4 5/8 5/8 & 3/8
12-147 4 3/4 11 1/2 2 3/4 4 5/8 5/8 & 1/2
12-148 4 1 11 7/8 3 3/16 4 5/8 5/8 & 1/2
12-149 4 1 1/4 12 1/8 3 1/8 4 5/8 5/8 & 1/2
12-150 4 1 1/2 12 1/8 3 1/16 4 5/8 5/8 & 1/2
12-151 4 2 12 1/8 3 1/8 4 5/8 5/8 & 1/2
12-152 4 2 1/2 12 1/8 4 4 5/8 5/8
12-153 4 3 13 3 15/16 4 5/8 5/8
12-154 4 3 1/2 13 5/8 3 3/4 4 5/8 5/8
12-155 4 4 13 5/8 4 5/8 4 5/8 5/8
12-156 4 1/2 1/2 12 3 4 3/4 5/8 & 3/8
12-157 4 1/2 3/4 12 2 3/4 4 3/4 5/8 & 1/2
12-158 4 1/2 1 12 3/4 3 3/16 4 3/4 5/8 & 1/2
12-159 4 1/2 1 1/4 12 3/4 3 1/8 4 3/4 5/8 & 1/2
12-160 4 1/2 1 1/2 12 3/4 3 1/16 4 3/4 5/8 & 1/2
12-161 4 1/2 2 12 5/8 3 1/8 4 3/4 5/8 & 1/2

 12-162 4 1/2 2 1/2 13 5/8 4 4 3/4 5/8
12-163 4 1/2 3 13 1/2 3 15/16 4 3/4 5/8
12-164 4 1/2 3 1/2 14 1/4 3 3/4 4 3/4 5/8
12-165 4 1/2 4 14 1/4 4 5/8 4 3/4 5/8

 12-166 4 1/2 4 1/2 14 1/4 4 3/4 4 3/4 5/8
12-167 5 1/2 12 1/2 3 5 1/16 5/8 & 3/8
12-168 5 3/4 12 1/2 2 3/4 5 1/16 5/8 & 1/2
 12-169 5 1 12 3/4 3 3/16 5 1/16 5/8 & 1/2
12-170 5 1 1/4 12 3/4 3 1/8 5 1/16 5/8 & 1/2

12-171 5 1 1/2 12 3/4 3 1/16 5 1/16 5/8 & 1/2
12-172 5 2 13 1/4 3 1/8 5 1/16 5/8 & 1/2
12-173 5 2 1/2 14 4 5 1/16 5/8
12-174 5 3 14 3 15/16 5 1/16 5/8
12-175 5 3 1/2 13 3/4 3 3/4 5 1/16 5/8
12-176 5 4 14 1/4 4 5/8 5 1/16 5/8
12-177 5 4 1/2 15 1/8 4 3/4 5 1/16 5/8
12-178 5 5 15 1/8 5 1/16 5 1/16 5/8
12-179 6 1/2 13 3/4 3 6 5/8 & 3/8
12-180 6 3/4 13 3/4 2 3/4 6 5/8 & 1/2
12-181 6 1 14 1/4 3 3/16 6 5/8 & 1/2
12-182 6 1 1/4 14 1/4 3 1/8 6 5/8 & 1/2
12-183 6 1 1/2 14 1/4 3 1/16 6 5/8 & 1/2
12-184 6 2 14 1/4 3 1/8 6 5/8 & 1/2
12-185 6 2 1/2 15 1/8 4 6 5/8
12-186 6 3 15 5/8 3 15/16 6 5/8
12-187 6 3 1/2 15 5/8 3 3/4 6 5/8
12-188 6 4 15 3/4 4 5/8 6 5/8
12-189 6 4 1/2 15 7/8 4 3/4 6 5/8
12-190 6 5 16 1/8 5 1/16 6 5/8
12-191 6 6 17 5/8 6 6 5/8
P
U
ALUMINUM TEE CONNECTORS, SECTION
PIPE RUN TO PIPE TAP 12-1A

IPS TAP
NUMBER MAIN A B C K
12-192 1/2 1/2 6 7/8 4 4 1/2
12-193 3/4 1/2 6 7/8 4 2 3/4 1/2
12-194 3/4 3/4 6 3/8 2 3/4 2 3/4 1/2
12-195 1 1/2 6 7/8 4 3 3/16 1/2
12-196 1 3/4 6 7/8 2 3/4 3 3/16 1/2
12-197 1 1 7 1/4 3 3/16 3 3/16 1/2
12-198 1 1/4 1/2 7 1/4 4 3 1/8 1/2 

12-199 1 1/4 3/4 7 1/4 2 3/4 3 1/8 1/2
12-200 1 1/4 1 7 3/4 3 3/16 3 1/8 1/2
12-201 1 1/4 1 1/4 7 3/4 3 1/8 3 1/8 1/2 

12-202 1 1/2 1/2 7 3/8 4 3 1/16 1/2

12-203 1 1/2 3/4 7 3/8 2 3/4 3 1/16 1/2 
12-204 1 1/2 1 7 3/4 3 3/16 3 1/16 1/2

12-205 1 1/2 1 1/4 7 3/4 3 1/8 3 1/16 1/2 
12-206 1 1/2 1 1/2 7 3/4 3 1/16 3 1/16 1/2

12-207 2 1/2 7 7/8 4 3 1/8 1/2
12-208 2 3/4 7 7/8 2 3/4 3 1/8 1/2
12-209 2 1 8 1/2 3 3/16 3 1/8 1/2
12-210 2 1 1/4 8 1/2 3 1/8 3 1/8 1/2
Where circumstances
require a pipe
12-211 2 1 1/2 8 1/2 3 1/16 3 1/8 1/2
connector of
12-212 2 2 8 1/4 3 1/8 3 1/8 1/2
lightweight aluminum
12-213 2 1/2 1/2 9 4 4 5/8 & 1/2
alloy, the Type APTP
12-214 2 1/2 3/4 9 2 3/4 4 5/8 & 1/2
meets the most
12-215 2 1/2 1 9 1/2 3 3/16 4 5/8 & 1/2
strenuous electrical and
12-216 2 1/2 1 1/4 9 3/4 3 1/8 4 5/8 & 1/2
mechanical demands.
12-217 2 1/2 1 1/2 9 3/4 3 1/16 4 5/8 & 1/2 Clamping hardware is
12-218 2 1/2 2 10 3/8 3 1/8 4 5/8 & 1/2 high tensile aluminum. In
12-219 2 1/2 2 1/2 10 3/8 4 4 5/8 order to facilitate single-
12-220 3 1/2 9 3/4 4 3 15/16 5/8 & 1/2 wrench installation, all
12-221 3 3/4 9 3/4 2 3/4 3 15/16 5/8 & 1/2 bolt heads are recessed.
12-222 3 1 10 1/8 3 3/16 3 15/16 5/8 & 1/2
12-223 3 1 1/4 10 3/8 3 1/8 3 15/16 5/8 & 1/2
12-224 3 1 1/2 10 3/8 3 1/16 3 15/16 5/8 & 1/2
12-225 Continued
3 on next
2 page 10 1/2 3 1/8 3 15/16 5/8 & 1/2
12-226 3 2 1/2 11 1/2 4 3 15/16 5/8
12-227 3 3 11 3/8 3 15/16 3 15/16 5/8
Continued on next page

P
U
SECTION ALUMINUM TEE CONNECTORS,
12-1A PIPE RUN TO PIPE TAP, continued
Continued from previous page

IPS MAIN IPS TAP
NUMBER A B C K
12-228 3 1/2 1/2 10 1/2 4 3 3/4 5/8 & 1/2
12-229 3 1/2 3/4 10 1/2 2 3/4 3 3/4 5/8 & 1/2
12-230 3 1/2 1 11 1/8 3 3/16 3 3/4 5/8 & 1/2
12-231 3 1/2 1 1/4 11 1/8 3 1/8 3 3/4 5/8 & 1/2
12-232 3 1/2 1 1/2 11 1/8 3 1/16 3 3/4 5/8 & 1/2
12-233 3 1/2 2 11 1/8 3 1/8 3 3/4 5/8
12-234 3 1/2 2 1/2 11 7/8 4 3 3/4 5/8 & 1/2
12-235 3 1/2 3 11 7/8 3 15/16 3 3/4 5/8
12-236 3 1/2 3 1/2 11 5/8 3 3/4 3 3/4 5/8
12-237 4 1/2 11 1/2 4 4 5/8 5/8 & 1/2
12-238 4 3/4 11 1/2 2 3/4 4 5/8 5/8 & 1/2
12-239 4 1 11 7/8 3 3/16 4 5/8 5/8 & 1/2
12-240 4 1 1/4 12 1/4 3 1/8 4 5/8 5/8 & 1/2
12-241 4 1 1/2 12 1/4 3 1/16 4 5/8 5/8 & 1/2
12-242 4 2 12 1/8 3 1/8 4 5/8 5/8 & 1/2
12-243 4 2 1/2 12 7/8 4 4 5/8 5/8
12-244 4 3 13 3 15/16 4 5/8 5/8
12-245 4 3 1/2 13 5/8 3 3/4 4 5/8 5/8
12-246 4 4 13 5/8 4 5/8 4 5/8 5/8
12-247 4 1/2 1/2 12 4 4 3/4 5/8 & 1/2
12-248 4 1/2 3/4 12 2 3/4 4 3/4 5/8 & 1/2
12-249 4 1/2 1 12 3 3/16 4 3/4 5/8 & 1/2
12-250 4 1/2 1 1/4 12 3/4 3 1/8 4 3/4 5/8 & 1/2
12-251 4 1/2 1 1/2 12 3/4 3 1/16 4 3/4 5/8 & 1/2
12-252 4 1/2 2 12 5/8 3 1/8 4 3/4 5/8 & 1/2
 12-253 4 1/2 2 1/2 13 3/8 4 4 3/4 5/8

12-254 4 1/2 3 13 1/2 3 15/16 4 3/4 5/8
12-255 4 1/2 3 1/2 14 1/4 3 3/4 4 3/4 5/8
12-256 4 1/2 4 14 1/4 4 5/8 4 3/4 5/8


12-257 4 1/2 4 1/2 14 1/4 4 3/4 4 3/4 5/8
12-258 5 1/2 12 1/2 4 5 1/16 5/8 & 1/2
12-259 5 3/4 12 1/2 2 3/4 5 1/16 5/8 & 1/2
 12-260 5 1 12 3/4 3 3/16 5 1/16 5/8 & 1/2
12-261 5 1 1/4 12 3/4 3 1/8 5 1/16 5/8 & 1/2
12-262 5 1 1/2 12 3/4 3 1/16 5 1/16 5/8 & 1/2

12-263 5 2 13 1/4 3 1/8 5 1/16 5/8 & 1/2
12-264 5 2 1/2 14 4 5 1/16 5/8
12-265 5 3 14 3 15/16 5 1/16 5/8
12-266 5 3 1/2 13 3/4 3 3/4 5 1/16 5/8
12-267 5 4 14 1/2 5 5 5/8
12-269 5 5 15 1/8 5 1/16 5 1/16 5/8
12-270 6 1/2 13 3/4 4 6 5/8 & 1/2
12-271 6 3/4 13 3/4 2 3/4 6 5/8 & 1/2
12-272 6 1 14 1/4 3 3/16 6 5/8 & 1/2
12-273 6 1 1/4 14 1/4 3 1/8 6 5/8 & 1/2
12-274 6 1 1/2 14 1/4 3 1/16 6 5/8 & 1/2
12-275 6 2 14 1/4 3 1/8 6 5/8 & 1/2
12-276 6 2 1/2 15 1/8 4 6 5/8
12-277 6 3 15 3/8 3 15/16 6 5/8
12-278 6 3 1/2 15 5/8 3 3/4 6 5/8
12-279 6 4 15 3/4 4 5/8 6 5/8
12-281 6 5 16 1/8 5 1/16 6 5/8
12-282 6 6 17 5/8 6 6 5/8
P
U
PIPE RUN TO ANGLE PIPE TAP 12-2

IPS TAP
NUMBER MAIN A B C K
12-283-(*) 1/2 1/2 7 3 3 3/8
12-284-(*) 3/4 1/2 7 3 2 3/4 1/2 & 3/8
12-285-(*) 3/4 3/4 7 2 3/4 2 3/4 1/2  


12-286-(*) 1 1/2 8 1/8 3 3 3/16 1/2 & 3/8
12-287-(*) 1 3/4 8 1/8 2 3/4 3 3/16 1/2
12-288-(*) 1 1 8 1/8 3 3/16 3 3/16 1/2
12-289-(*) 1 1/4 1/2 8 1/8 3 3 1/8 1/2 & 3/8
 
12-290-(*) 1 1/4 3/4 8 1/8 2 3/4 3 1/8 1/2
12-291-(*) 1 1/4 1 8 1/2 3 3/16 3 1/8 1/2


12-292-(*) 1 1/4 1 1/4 8 3/4 3 1/8 3 1/8 1/2
12-293-(*) 1 1/2 1/2 8 3 3 1/16 1/2 & 3/8
 
12-294-(*) 1 1/2 3/4 9 2 3/4 3 1/16 1/2 
 

12-295-(*) 1 1/2 1 8 3/4 3 3/16 3 1/16 1/2 

12-296-(*) 1 1/2 1 1/4 8 1/2 3 1/8 3 1/16 1/2
12-297-(*) 1 1/2 1 1/2 8 1/2 3 1/16 3 1/16 1/2
12-298-(*) 2 1/2 8 3/8 3 3 1/8 1/2 & 3/8
12-299-(*) 2 3/4 8 5/8 2 3/4 3 1/8 1/2
12-300-(*) 2 1 7 3 3/16 3 1/8 1/2
A strong and dependable con-
12-301-(*) 2 1 1/4 9 3/4 3 1/8 3 1/8 1/2
nector for joining a pipe main to
12-302-(*) 2 1 1/2 7 5/8 3 1/16 3 1/8 1/2
12-303-(*) 2 2 10 3 1/8 3 1/8 1/2
a tap whose angle varies from
12-304-(*) 2 1/2 1/2 9 3/4 3 4 5/8 & 3/8 the perpendicular, the type PTA
12-305-(*) 2 1/2 3/4 9 3/4 2 3/4 4 5/8 & 1/2 relies on a high conductivity
12-306-(*) 2 1/2 1 11 1/8 3 3/16 4 5/8 & 1/2 copper alloy for its durability.
12-307-(*) 2 1/2 1 1/4 11 1/8 3 1/8 4 5/8 & 1/2
Bolts, nuts, and lockwashers
12-308-(*) 2 1/2 1 1/2 11 1/8 3 1/16 4 5/8 & 1/2
are silicon bronze for clamping
12-309-(*) 2 1/2 2 11 3/4 3 1/8 4 5/8 & 1/2
12-310-(*) 2 1/2 2 1/2 11 1/2 4 4 5/8
strength and resistance to corro-
12-311-(*) 3 1/2 10 3 3 15/16 5/8 & 3/8 sion. Bolt heads are recessed for
12-312-(*) 3 3/4 10 2 3/4 3 15/16 5/8 & 1/2 single-wrench installation.
12-313-(*) 3 1 10 3/4 3 3/16 3 15/16 5/8 & 1/2 *In ordering the type PTA tee
12-314-(*) 3 1 1/4 11 1/2 3 1/8 3 15/16 5/8 & 1/2
connector, the varying angle
12-315-(*) 3 1 1/2 11 1/2 3 1/16 3 15/16 5/8 & 1/2
must be designated in a suffix
12-316-(*) 3 2 11 1/2 3 1/8 3 15/16 5/8 & 1/2
12-317-(*) 3 2 1/2 12 1/4 4 3 15/16 5/8
added to the catalog number. A
12-318-(*) 3 3 13 1/4 3 15/16 3 15/16 5/8 15° angle tap for catalog number
12-319-(*) 3 1/2 1/2 11 1/8 3 3 3/4 5/8 & 3/8 12-283, for instance, should be
12-320-(*) 3 1/2 3/4 11 1/8 2 3/4 3 3/4 5/8 & 1/2 written 12-283-15 on the order.
12-321-(*) 3 1/2 1 11 3/4 3 3/16 3 3/4 5/8 & 1/2
12-322-(*) 3 1/2 1 1/4 11 3/4 3 1/8 3 3/4 5/8 & 1/2
12-323-(*) 3 1/2 1 1/2 11 1/2 3 1/16 3 3/4 5/8 & 1/2
12-324-(*) 3 1/2 2 12 3 1/8 3 3/4 5/8 & 1/2
12-325-(*) 3 1/2 2 1/2 13 4 3 3/4 5/8
12-326-(*) 3 1/2 3 13 1/2 3 15/16 3 3/4 5/8
12-327-(*) 3 1/2 3 1/2 13 1/4 3 3/4 3 3/4 5/8
P
U
SECTION BRONZE TEE CONNECTORS, PIPE
12-2 RUN TO ANGLE PIPE TAP, continued

IPS MAIN IPS TAP
NUMBER A B C K
12-328-(*) 4 1/2 12 1/4 3 4 5/8 5/8 & 3/8
12-329-(*) 4 3/4 12 1/4 2 3/4 4 5/8 5/8 & 1/2
12-330-(*) 4 1 13 3 3/16 4 5/8 5/8 & 1/2
12-331-(*) 4 1 1/4 13 3 1/8 4 5/8 5/8 & 1/2
12-332-(*) 4 1 1/2 13 3 1/16 4 5/8 5/8 & 1/2
12-333-(*) 4 2 14 3/8 3 1/8 4 5/8 5/8 & 1/2
12-334-(*) 4 2 1/2 14 4 4 5/8 5/8
12-335-(*) 4 3 14 1/4 3 15/16 4 5/8 5/8
12-336-(*) 4 3 1/2 14 3 3/4 4 5/8 5/8
12-337-(*) 4 4 15 1/8 4 5/8 4 5/8 5/8
12-338-(*) 4 1/2 1/2 12 7/8 3 4 3/4 5/8 & 3/8
12-339-(*) 4 1/2 3/4 12 7/8 2 3/4 4 3/4 5/8 & 1/2

 12-340-(*) 4 1/2 1 13 3 3/16 4 3/4 5/8 & 1/2
12-341-(*) 4 1/2 1 1/4 13 3 1/8 4 3/4 5/8 & 1/2
12-342-(*) 4 1/2 1 1/2 13 3 1/16 4 3/4 5/8 & 1/2
12-343-(*) 4 1/2 2 14 3 1/8 4 3/4 5/8 & 1/2

12-344-(*) 4 1/2 2 1/2 14 4 4 3/4 5/8
12-345-(*) 4 1/2 3 14 3 15/16 4 3/4 5/8

12-346-(*) 4 1/2 3 1/2 14 3 3/4 4 3/4 5/8

 12-347-(*) 4 1/2 4 15 1/8 4 5/8 4 3/4 5/8

 12-348-(*) 4 1/2 4 1/2 15 1/8 4 3/4 4 3/4 5/8
 12-349-(*) 5 1/2 13 1/4 3 5 1/16 5/8 & 3/8
12-350-(*) 5 3/4 13 1/4 2 3/4 5 1/16 5/8 & 1/2
12-351-(*) 5 1 13 3/4 3 3/16 5 1/16 5/8 & 1/2
12-352-(*) 5 1 1/4 13 3/4 3 1/8 5 1/16 5/8 & 1/2
12-353-(*) 5 1 1/2 14 1/4 3 1/16 5 1/16 5/8 & 1/2
12-354-(*) 5 2 14 5/8 3 1/8 5 1/16 5/8 & 1/2
12-355-(*) 5 2 1/2 15 3/8 4 5 1/16 5/8
12-356-(*) 5 3 15 1/2 3 15/16 5 1/16 5/8
12-357-(*) 5 3 1/2 15 3 3/4 5 1/16 5/8
*In ordering the type PTA
12-358-(*) 5 4 16 4 5/8 5 1/16 5/8
tee connector, the varying 12-359-(*) 5 4 1/2 16 4 3/4 5 1/16 5/8
angle must be designated in 12-360-(*) 5 5 16 1/4 5 1/16 5 1/16 5/8
a suffix added to the catalog 12-361-(*) 6 1/2 14 3/4 3 6 5/8 & 3/8
number. A 15° angle tap for 12-362-(*) 6 3/4 14 3/4 2 3/4 6 5/8 & 1/2
catalog number 12-329, for 12-363-(*) 6 1 15 1/4 3 3/16 6 5/8 & 1/2
instance, should be written 12-364-(*) 6 1 1/4 15 1/4 3 1/8 6 5/8 & 1/2
12-329-15 on the order. 12-365-(*) 6 1 1/2 15 1/4 3 1/16 6 5/8 & 1/2
12-366-(*) 6 2 15 1/4 3 1/8 6 5/8 & 1/2
12-367-(*) 6 2 1/2 16 1/2 4 6 5/8
12-368-(*) 6 3 16 1/2 3 15/16 6 5/8
12-369-(*) 6 3 1/2 16 5/8 3 3/4 6 5/8
12-370-(*) 6 4 17 1/2 4 5/8 6 5/8
12-371-(*) 6 4 1/2 17 5/8 4 3/4 6 5/8
12-372-(*) 6 5 18 5 1/16 6 5/8
12-373-(*) 6 6 19 6 6 5/8
P
U
ALUMINUM TEE CONNECTORS, SECTION
PIPE RUN TO ANGLE PIPE TAP 12-2A

IPS TAP
NUMBER MAIN A B C K
12-374-(*) 1/2 1/2 7 4 4 1/2
12-375-(*) 3/4 1/2 7 2 7/8 2 3/4 1/2
12-376-(*) 3/4 3/4 7 2 3/4 2 3/4 1/2
12-377-(*) 1 1/2 8 1/8 4 3 3/16 1/2
12-378-(*) 1 3/4 8 1/8 2 3/4 3 3/16 1/2
12-379-(*) 1 1 8 1/8 3 3/16 3 3/16 1/2
12-380-(*) 1 1/4 1/2 8 1/8 4 3 1/8 1/2
12-381-(*) 1 1/4 3/4 8 1/8 2 3/4 3 1/8 1/2
12-382-(*) 1 1/4 1 8 1/2 3 3/16 3 1/8 1/2
12-383-(*) 1 1/4 1 1/4 8 3/4 3 1/8 3 1/8 1/2
12-384-(*) 1 1/2 1/2 8 4 3 1/16 1/2
12-385-(*) 1 1/2 3/4 9 2 3/4 3 1/16 1/2

12-386-(*) 1 1/2 1 8 3/4 3 3/16 3 1/16 1/2 
12-387-(*) 1 1/2 1 1/4 8 1/2 3 1/8 3 1/16 1/2

12-388-(*) 1 1/2 1 1/2 8 1/2 3 1/16 3 1/16 1/2
12-389-(*) 2 1/2 8 3/8 4 3 1/8 1/2 
12-390-(*) 2 3/4 8 5/8 2 3/4 3 1/8 1/2

12-391-(*) 2 1 9 1/2 3 3/16 3 1/8 1/2
12-392-(*) 2 1 1/4 9 5/8 3 1/8 3 1/8 1/2

12-393-(*) 2 1 1/2 9 3/4 3 1/16 3 1/8 1/2 

12-394-(*) 2 2 10 3 1/8 3 1/8 1/2

12-395-(*) 2 1/2 1/2 9 3/4 4 4 5/8 & 1/2
12-396-(*) 2 1/2 3/4 9 3/4 2 3/4 4 5/8 & 1/2
12-397-(*) 2 1/2 1 11 1/8 3 3/16 4 5/8 & 1/2
12-398-(*) 2 1/2 1 1/4 11 1/8 3 1/8 4 5/8 & 1/2
12-399-(*) 2 1/2 1 1/2 11 1/8 3 1/16 4 5/8 & 1/2 Cast of lightweight aluminum alloy,
12-400-(*) 2 1/2 2 11 1/8 3 1/8 4 5/8 & 1/2 the type APTA adapts to situations
12-401-(*) 2 1/2 2 1/2 11 1/2 4 4 5/8 requiring the junction of a tubular
12-402-(*) 3 1/2 10 4 3 15/16 5/8 & 1/2 main to a tap whose angle varies
12-403-(*) 3 3/4 10 2 3/4 3 15/16 5/8 & 1/2
from the perpendicular. All clamping
12-404-(*) 3 1 10 3/4 3 3/16 3 15/16 5/8 & 1/2
hardware is made of high tensile
12-405-(*) 3 1 1/4 11 3/4 3 1/8 3 15/16 5/8 & 1/2
12-406-(*) 3 1 1/2 11 1/2 3 1/16 3 15/16 5/8 & 1/2
aluminum. To facilitate installation,
12-407-(*) 3 2 11 1/2 3 1/8 3 15/16 5/8 & 1/2 bolt heads are recessed.
12-408-(*) 3 2 1/2 11 5/8 4 3 15/16 5/8 *In ordering the type APTA tee
12-409-(*) 3 3 13 1/4 3 15/16 3 15/16 5/8
connector, the varying angle must
12-410-(*) 3 1/2 1/2 11 1/8 4 3 3/4 5/8 & 1/2
be written as a suffix after the
12-411-(*) 3 1/2 3/4 11 1/8 2 3/4 3 3/4 5/8 & 1/2
12-412-(*) 3 1/2 1 11 3/4 3 3/16 3 3/4 5/8 & 1/2
catalog number.
12-413-(*) 3 1/2 1 1/4 11 3/4 3 1/8 3 3/4 5/8 & 1/2 A 15° angle tap for catalog number
12-414-(*) 3 1/2 1 1/2 12 3 1/16 3 3/4 5/8 & 1/2 12-374, for example, should appear
12-415-(*) 3 1/2 2 12 1/4 3 1/8 3 3/4 5/8 & 1/2 as 12-374-15.
12-416-(*) 3 1/2 2 1/2 13 4 3 3/4 5/8
12-417-(*) 3 1/2 3 13 3 15/16 3 3/4 5/8
12-418-(*) 3 1/2 3 1/2 13 1/4 3 3/4 3 3/4 5/8
P
U
SECTION ALUMINUM TEE CONNECTORS PIPE
12-2A RUN TO ANGLE PIPE TAP, continued
CATALOG IPS IPS DIMENSIONS IN INCHES
NUMBER MAIN TAP A B C K
12-419-(*) 4 1/2 12 1/4 4 4 5/8 5/8 & 1/2
12-420-(*) 4 3/4 12 1/4 2 3/4 4 5/8 5/8 & 1/2
12-421-(*) 4 1 13 3 3/16 4 5/8 5/8 & 1/2
12-422-(*) 4 1 1/4 13 3 1/8 4 5/8 5/8 & 1/2
12-423-(*) 4 1 1/2 13 3 1/16 4 5/8 5/8 & 1/2
12-424-(*) 4 2 13 1/4 3 1/8 4 5/8 5/8 & 1/2
12-425-(*) 4 2 1/2 14 4 4 5/8 5/8
12-426-(*) 4 3 14 1/4 3 15/16 4 5/8 5/8
12-427-(*) 4 3 1/2 13 1/4 3 3/4 4 5/8 5/8
12-428-(*) 4 4 15 7/8 4 5/8 4 5/8 5/8
12-429-(*) 4 1/2 1/2 12 7/8 4 4 3/4 5/8 & 1/2

 12-430-(*) 4 1/2 3/4 12 7/8 2 3/4 4 3/4 5/8 & 1/2
12-431-(*) 4 1/2 1 13 3 3/16 4 3/4 5/8 & 1/2
12-432-(*) 4 1/2 1 1/4 13 3 1/8 4 3/4 5/8 & 1/2
12-433-(*) 4 1/2 1 1/2 13 3 1/16 4 3/4 5/8 & 1/2

12-434-(*) 4 1/2 2 14 3/8 3 1/8 4 3/4 5/8 & 1/2
12-435-(*) 4 1/2 2 1/2 14 4 4 3/4 5/8

12-436-(*) 4 1/2 3 14 3 15/16 4 3/4 5/8

12-437-(*) 4 1/2 3 1/2 14 3 3/4 4 3/4 5/8


12-438-(*) 4 1/2 4 15 1/8 4 5/8 4 3/4 5/8

12-439-(*) 4 1/2 4 1/2 15 1/8 4 3/4 4 3/4 5/8

12-440-(*) 5 1/2 13 1/4 4 5 1/16 5/8 & 1/2
12-441-(*) 5 3/4 13 1/4 2 3/4 5 1/16 5/8 & 1/2
12-442-(*) 5 1 13 3/4 3 3/16 5 1/16 5/8 & 1/2
12-443-(*) 5 1 1/4 13 3/4 3 1/8 5 1/16 5/8 & 1/2
12-444-(*) 5 1 1/2 14 1/4 3 1/16 5 1/16 5/8 & 1/2
12-445-(*) 5 2 14 5/8 3 1/8 5 1/16 5/8 & 1/2
12-446-(*) 5 2 1/2 15 3/8 4 5 1/16 5/8
12-447-(*) 5 3 15 1/2 3 15/16 5 1/16 5/8
12-448-(*) 5 3 1/2 15 3 3/4 5 1/16 5/8
12-449-(*) 5 4 16 4 5/8 5 1/16 5/8
12-450-(*) 5 4 1/2 16 4 3/4 5 1/16 5/8
*In ordering the type APTA tee
12-451-(*) 5 5 16 1/4 5 1/16 5 1/16 5/8
connector, the varying angle 12-452-(*) 6 1/2 14 3/4 4 6 5/8 & 1/2
must be written as a suffix after 12-453-(*) 6 3/4 14 3/4 2 3/4 6 5/8 & 1/2
the catalog number. A 15° angle 12-454-(*) 6 1 15 1/4 3 3/16 6 5/8 & 1/2
tap for catalog number 12-419, 12-455-(*) 6 1 1/4 15 1/4 3 1/8 6 5/8 & 1/2
for example, should appear as 12-456-(*) 6 1 1/2 15 1/4 3 1/16 6 5/8 & 1/2
12-419-15. 12-457-(*) 6 2 15 1/4 3 1/8 6 5/8 & 1/2
12-458-(*) 6 2 1/2 16 1/2 4 6 5/8
12-459-(*) 6 3 16 1/2 3 15/16 6 5/8
12-460-(*) 6 3 1/2 16 5/8 3 3/4 6 5/8
12-461-(*) 6 4 17 1/2 4 5/8 6 5/8
12-462-(*) 6 4 1/2 17 5/8 4 3/4 6 5/8
12-463-(*) 6 5 18 5 1/16 6 5/8
12-464-(*) 6 6 19 6 6 5/8
P
U
BRONZE VEE CONNECTORS, SECTION
PIPE RUN TO DOUBLE PIPE TAP 12-3

NUMBER MAIN TAP B C D K
12-465-(*) 1/2 1/2 3 3 2 1/4 3/8
12-466-(*) 3/4 1/2 2 3/4 3 2 1/4 1/2 & 3/8
12-467-(*) 3/4 3/4 2 3/4 2 3/4 3 3/8 1/2
12-468-(*) 1 1/2 3 3/16 3 2 1/4 1/2 & 3/8
12-469-(*) 1 3/4 3 3/16 2 3/4 3 3/8 1/2
12-470-(*) 1 1 3 3/16 3 3/16 3 7/8 1/2
12-471-(*) 1 1/4 1/2 3 1/8 3 2 1/4 1/2 & 3/8
12-472-(*) 1 1/4 3/4 3 1/8 2 3/4 3 3/8 1/2
12-473-(*) 1 1/4 1 3 1/8 3 3/16 3 7/8 1/2
12-474-(*) 1 1/4 1 1/4 3 1/8 3 1/8 4 5/16 1/2
12-475-(*) 1 1/2 1/2 3 1/16 3 2 1/4 1/2 & 3/8
12-476-(*) 1 1/2 3/4 3 1/16 2 3/4 3 3/8 1/2
12-477-(*) 1 1/2 1 3 1/16 3 3/16 3 7/8 1/2
12-478-(*) 1 1/2 1 1/4 3 1/16 3 1/8 4 5/16 1/2
12-479-(*) 1 1/2 1 1/2 3 1/16 3 1/16 4 3/8 1/2
12-480-(*) 2 1/2 3 1/8 3 2 1/4 1/2 & 3/8
12-481-(*) 2 3/4 3 1/8 2 3/4 3 3/8 1/2
12-482-(*) 2 1 3 1/8 3 3/16 3 7/8 1/2
12-483-(*) 2 1 1/4 3 1/8 3 1/8 4 5/16 1/2
12-484-(*) 2 1 1/2 3 1/8 3 1/16 4 3/8 1/2
12-485-(*) 2 2 3 1/8 3 1/8 5 1/8 1/2
12-486-(*) 2 1/2 1/2 4 3 2 1/4 5/8 & 1/2
12-487-(*) 2 1/2 3/4 4 2 3/4 3 3/8 5/8 & 1/2
12-488-(*) 2 1/2 1 4 3 3/16 3 7/8 5/8 & 1/2
12-489-(*) 2 1/2 1 1/4 4 3 1/8 4 5/16 5/8 & 1/2
12-490-(*) 2 1/2 1 1/2 4 3 1/16 4 3/8 5/8 & 1/2 An efficient connector for joining two
12-491-(*) 2 1/2 2 4 3 1/8 5 1/8 5/8 & 1/2 taps to a single main, the type PTV
12-492-(*) 2 1/2 2 1/2 4 4 6 1/8 5/8 utilizes a high conductivity copper alloy.
12-493-(*) 3 1/2 3 15/16 3 2 1/4 5/8 & 3/8 The silicon bronze clamping hardware
12-494-(*) 3 3/4 3 15/16 2 3/4 3 3/8 5/8 & 1/2 increases clamping strength and resists
12-495-(*) 3 1 3 15/16 3 3/16 3 7/8 5/8 & 1/2 corrosion. For single-wrench installation,
12-496-(*) 3 1 1/4 3 15/16 3 1/8 4 5/16 5/8 & 1/2 all bolt heads are captivated.
12-497-(*) 3 1 1/2 3 15/16 3 1/16 4 3/8 5/8 & 1/2
12-498-(*) 3 2 3 15/16 3 1/8 5 1/8 5/8 & 1/2 *Orders for this type of vee connector
12-499-(*) 3 2 1/2 3 15/16 4 6 1/8 5/8 require the addition of a suffix to the
12-500-(*) 3 3 3 15/16 3 15/16 7 5/8 catalog number for denoting the varying
12-501-(*) 3 1/2 1/2 3 3/4 3 2 1/4 5/8 & 3/8 angle from center plane (see image
12-502-(*) 3 1/2 3/4 3 3/4 2 3/4 3 3/8 5/8 & 1/2 above).
12-503-(*) 3 1/2 1 3 3/4 3 3/16 3 7/8 5/8 & 1/2
12-504-(*) 3 1/2 1 1/4 3 3/4 3 1/8 4 5/16 5/8 & 1/2 If the angle varies 15° from the perpen-
12-505-(*) 3 1/2 1 1/2 3 3/4 3 1/16 4 3/8 5/8 & 1/2 dicular, for example, and the number
12-506-(*) 3 1/2 2 3 3/4 3 1/8 5 1/8 5/8 & 1/2 being requested is 12-465, it should
12-507-(*) 3 1/2 2 1/2 3 3/4 4 6 1/8 5/8 appear on the order as 12-465-15.
12-508-(*) 3 1/2 3 3 3/4 3 15/16 7 5/8
12-509-(*) 3 1/2 3 1/2 3 3/4 3 3/4 7 1/2 5/8
P
U
SECTION BRONZE VEE CONNECTORS, PIPE RUN
12-3 TO DOUBLE PIPE TAP, continued

12-510-(*) 4 1/2 4 5/8 3 2 1/4 5/8 & 3/8
12-511-(*) 4 3/4 4 5/8 2 3/4 3 3/8 5/8 & 1/2
12-512-(*) 4 1 4 5/8 3 3/16 3 7/8 5/8 & 1/2
12-513-(*) 4 1 1/4 4 5/8 3 1/8 4 5/16 5/8 & 1/2
12-514-(*) 4 1 1/2 4 5/8 3 1/16 4 3/8 5/8 & 1/2
12-515-(*) 4 2 4 5/8 3 1/8 5 1/8 5/8 & 1/2
12-516-(*) 4 2 1/2 4 5/8 4 6 1/8 5/8
12-517-(*) 4 3 4 5/8 3 15/16 7 5/8
12-518-(*) 4 31/2 4 5/8 3 3/4 7 1/2 5/8
12-519-(*) 4 4 4 5/8 4 5/8 8 1/2 5/8
12-520-(*) 4 1/2 1/2 4 3/4 3 2 1/4 5/8 & 3/8
12-521-(*) 4 1/2 3/4 4 3/4 2 3/4 3 3/8 5/8 & 1/2
12-522-(*) 4 1/2 1 4 3/4 3 3/16 3 7/8 5/8 & 1/2
12-523-(*) 4 1/2 1 1/4 4 3/4 3 1/8 4 5/16 5/8 & 1/2
12-524-(*) 4 1/2 1 1/2 4 3/4 3 1/16 4 3/8 5/8 & 1/2
12-525-(*) 4 1/2 2 4 3/4 3 1/8 5 1/8 5/8 & 1/2
12-526-(*) 4 1/2 2 1/2 4 3/4 4 6 1/8 5/8
12-527-(*) 4 1/2 3 4 3/4 3 15/16 7 5/8
12-528-(*) 4 1/2 3 1/2 4 3/4 3 3/4 7 1/2 5/8
12-529-(*) 4 1/2 4 4 3/4 4 5/8 8 1/2 5/8
12-530-(*) 4 1/2 4 1/2 4 3/4 4 3/4 9 5/8
12-531-(*) 5 1/2 5 1/16 3 2 1/4 5/8 & 3/8
12-532-(*) 5 3/4 5 1/16 2 3/4 3 3/8 5/8 & 1/2
12-533-(*) 5 1 5 1/16 3 3/16 3 7/8 5/8 & 1/2
12-534-(*) 5 1 1/4 5 1/16 3 1/8 4 5/16 5/8 & 1/2
12-535-(*) 5 1 1/2 5 1/16 3 1/16 4 3/8 5/8 & 1/2
12-536-(*) 5 2 5 1/16 3 1/8 5 1/8 5/8 & 1/2
12-537-(*) 5 2 1/2 5 1/16 4 6 1/8 5/8
12-538-(*) 5 3 5 1/16 3 15/16 7 5/8
Orders for this type of vee 12-539-(*) 5 3 1/2 5 1/16 3 3/4 7 1/2 5/8
connector require the addition of 12-540-(*) 5 4 5 1/16 4 5/8 8 1/2 5/8
a suffix to the catalog number for 12-541-(*) 5 4 1/2 5 1/16 4 3/4 9 5/8
12-542-(*) 5 5 5 1/16 5 1/16 9 5/8 5/8
denoting the varying angle from
12-543-(*) 6 1/2 6 3 2 1/4 5/8 & 3/8
center plane (see image above). 12-544-(*) 6 3/4 6 2 3/4 3 3/8 5/8 & 1/2
*If the angle varies 15° from the 12-545-(*) 6 1 6 3 3/16 3 7/8 5/8 & 1/2
perpendicular, for example, and 12-546-(*) 6 1 1/4 6 3 1/8 4 5/16 5/8 & 1/2
12-547-(*) 6 1 1/2 6 3 1/16 4 3/8 5/8 & 1/2
the number being requested is
12-548-(*) 6 2 6 3 1/8 5 1/8 5/8 & 1/2
12-510, it should appear on the 12-549-(*) 6 2 1/2 6 4 6 1/8 5/8
order as 12-510-15. 12-550-(*) 6 3 6 3 15/16 7 5/8
12-551-(*) 6 3 1/2 6 3 3/4 7 1/2 5/8
12-552-(*) 6 4 6 4 5/8 8 1/2 5/8
12-553-(*) 6 4 1/2 6 4 3/4 9 5/8
12-554-(*) 6 5 6 5 1/16 9 5/8 5/8
12-555-(*) 6 6 6 6 11 5/8
P
U
ALUMINUM VEE CONNECTORS, SECTION
PIPE RUN TO DOUBLE PIPE TAP 12-3A

IPS TAP
NUMBER MAIN B C D K
12-556-(*) 1/2 1/2 4 4 2 7/8 1/2
12-557-(*) 3/4 1/2 2 3/4 4 2 7/8 1/2
12-558-(*) 3/4 3/4 2 3/4 2 3/4 3 3/8 1/2
12-559-(*) 1 1/2 3 3/16 4 2 7/8 1/2
12-560-(*) 1 3/4 3 3/16 2 3/4 3 3/8 1/2
12-561-(*) 1 1 3 3/16 3 3/16 3 7/8 1/2
12-562-(*) 1 1/4 1/2 3 1/8 4 2 7/8 1/2
12-563-(*) 1 1/4 3/4 3 1/8 2 3/4 3 3/8 1/2
12-564-(*) 1 1/4 1 3 1/8 3 1/16 3 7/8 1/2
12-565-(*) 1 1/4 1 1/4 3 1/8 3 1/8 4 5/16 1/2
12-566-(*) 1 1/2 1/2 3 1/16 4 2 7/8 1/2
12-567-(*) 1 1/2 3/4 3 1/16 2 3/4 3 3/8 1/2
12-568-(*) 1 1/2 1 3 1/16 3 3/16 3 7/8 1/2
12-569-(*) 1 1/2 1 1/4 3 1/16 3 1/8 4 5/16 1/2
12-570-(*) 1 1/2 1 1/2 3 1/16 3 1/16 4 3/8 1/2
12-571-(*) 2 1/2 3 1/8 4 2 7/8 1/2
12-572-(*) 2 3/4 3 1/8 2 3/4 3 3/8 1/2
12-573-(*) 2 1 3 1/8 3 3/16 3 7/8 1/2
12-574-(*) 2 1 1/4 3 1/8 3 1/8 4 5/16 1/2
12-575-(*) 2 1 1/2 3 1/8 3 1/16 4 3/8 1/2
12-576-(*) 2 2 3 1/8 3 1/8 5 1/8 1/2
12-577-(*) 2 1/2 1/2 4 4 2 7/8 5/8 & 1/2
12-578-(*) 2 1/2 3/4 4 2 3/4 3 3/8 5/8 & 1/2
12-579-(*) 2 1/2 1 4 3 3/16 3 7/8 5/8 & 1/2
12-580-(*) 2 1/2 1 1/4 4 3 1/8 4 5/16 5/8 & 1/2
12-581-(*) 2 1/2 1 1/2 4 3 1/16 4 3/8 5/8 & 1/2
12-582-(*) 2 1/2 2 4 3 1/8 5 1/8 5/8 & 1/2
12-583-(*) 2 1/2 2 1/2 4 4 6 1/8 5/8 A strong, lightweight connector for joining
12-584-(*) 3 1/2 3 15/16 4 2 7/8 5/8 & 1/2 two taps to a single main, the type APTV,
12-585-(*) 3 3/4 3 15/16 2 3/4 3 3/8 5/8 & 1/2 which is cast of aluminum alloy,features
12-586-(*) 3 1 3 15/16 3 3/16 3 7/8 5/8 & 1/2 clamping hardware made of high-tensile
12-587-(*) 3 1 1/4 3 15/16 3 1/8 4 5/16 5/8 & 1/2 aluminum. All bolt heads are captivated.
12-588-(*) 3 1 1/2 3 15/16 3 1/16 4 3/8 5/8 & 1/2
12-589-(*) 3 2 3 15/16 3 1/8 5 1/8 5/8 & 1/2 Orders for this type of vee connector
12-590-(*) 3 2 1/2 3 15/16 4 6 1/8 5/8 require the addition of a suffix to the
12-591-(*) 3 3 3 15/16 3 15/16 7 5/8 catalog number that designates the
12-592-(*) 3 1/2 1/2 3 3/4 4 2 7/8 5/8 & 1/2 proper angle of variation from the
12-593-(*) 3 1/2 3/4 3 3/4 2 3/4 3 3/8 5/8 & 1/2 perpendicular.
12-594-(*) 3 1/2 1 3 3/4 3 3/16 3 7/8 5/8 & 1/2
12-595-(*) 3 1/2 1 1/4 3 3/4 3 1/8 4 5/16 5/8 & 1/2 *If the angle varies 15° from the perpen-
12-596-(*) 3 1/2 1 1/2 3 3/4 3 1/16 4 3/8 5/8 & 1/2 dicular, for example, and the number
12-597-(*) 3 1/2 2 3 3/4 3 1/8 5 1/8 5/8 & 1/2 being requested is 12-556, it should
12-598-(*) 3 1/2 2 1/2 3 3/4 4 6 1/8 5/8 appear on the order as 12-556-15.
12-599-(*) 3 1/2 3 3 3/4 3 15/16 7 5/8
12-600-(*) 3 1/2 3 1/2 3 3/4 3 3/4 7 1/2 5/8
P
U
SECTION ALUMINUM VEE CONNECTORS, PIPE
12-3A RUN TO DOUBLE PIPE TAP, continued

12-601-(*) 4 1/2 4 5/8 4 2 7/8 5/8 & 1/2
12-602-(*) 4 3/4 4 5/8 2 3/4 3 3/8 5/8 & 1/2
12-603-(*) 4 1 4 5/8 3 3/16 3 7/8 5/8 & 1/2
12-604-(*) 4 1 1/4 4 5/8 3 1/8 4 5/16 5/8 & 1/2
12-605-(*) 4 1 1/2 4 5/8 3 1/16 4 3/8 5/8 & 1/2
12-606-(*) 4 2 4 5/8 3 1/8 5 1/8 5/8 & 1/2
12-607-(*) 4 2 1/2 4 5/8 4 6 1/8 5/8
12-608-(*) 4 3 4 5/8 3 15/16 7 5/8
12-609-(*) 4 3 1/2 4 5/8 3 3/4 7 1/2 5/8
12-610-(*) 4 4 4 5/8 4 5/8 8 1/2 5/8
12-611-(*) 4 1/2 1/2 4 3/4 4 2 7/8 5/8 & 1/2
12-612-(*) 4 1/2 3/4 4 3/4 2 3/4 3 3/8 5/8 & 1/2
12-613-(*) 4 1/2 1 4 3/4 3 3/16 3 7/8 5/8 & 1/2
12-614-(*) 4 1/2 1 1/4 4 3/4 3 1/8 4 5/16 5/8 & 1/2
12-615-(*) 4 1/2 1 1/2 4 3/4 3 1/16 4 3/8 5/8 & 1/2
12-616-(*) 4 1/2 2 4 3/4 3 1/8 5 1/8 5/8 & 1/2
12-617-(*) 4 1/2 2 1/2 4 3/4 4 6 1/8 5/8
12-618-(*) 4 1/2 3 4 3/4 3 15/16 7 5/8
12-619-(*) 4 1/2 3 1/2 4 3/4 3 3/4 7 1/2 5/8
12-620-(*) 4 1/2 4 4 3/4 4 5/8 8 1/2 5/8
12-621-(*) 4 1/2 4 1/2 4 3/4 4 3/4 9 1/8 5/8
12-622-(*) 5 1/2 5 1/16 4 2 7/8 5/8 & 1/2
12-623-(*) 5 3/4 5 1/16 2 3/4 3 3/8 5/8 & 1/2
12-624-(*) 5 1 5 1/16 3 3/16 3 7/8 5/8 & 1/2
12-625-(*) 5 1 1/4 5 1/16 3 1/8 4 5/16 5/8 & 1/2
12-626-(*) 5 1 1/2 5 1/16 3 1/16 4 3/8 5/8 & 1/2
Orders for this type of vee 12-627-(*) 5 2 5 1/16 3 1/8 5 1/8 5/8 & 1/2
connector require the addition 12-628-(*) 5 2 1/2 5 1/16 4 6 1/8 5/8
12-629-(*) 5 3 5 1/16 3 15/16 7 5/8
of a suffix to the catalog
12-630-(*) 5 3 1/2 5 1/16 3 3/4 7 1/2 5/8
number that designates the
12-631-(*) 5 4 5 1/16 4 5/8 8 1/2 5/8
proper angle of variation 12-632-(*) 5 4 1/2 5 1/16 4 3/4 9 1/8 5/8
from the perpendicular. 12-633-(*) 5 5 5 1/16 5 1/16 9 5/8 5/8
*If the angle varies 15° from the 12-634-(*) 6 1/2 6 4 2 7/8 5/8 & 1/2
perpendicular, for example, and 12-635-(*) 6 3/4 6 2 3/4 3 3/8 5/8 & 1/2
12-636-(*) 6 1 6 3 3/16 3 7/8 5/8 & 1/2
the number being requested is
12-637-(*) 6 1 1/4 6 3 1/8 4 5/16 5/8 & 1/2
12-601, it should appear on the
12-638-(*) 6 1 1/2 6 3 1/16 4 3/8 5/8 & 1/2
order as 12-601-15. 12-639-(*) 6 2 6 3 1/8 5 1/8 5/8 & 1/2
12-640-(*) 6 2 1/2 6 4 6 1/8 5/8
12-641-(*) 6 3 6 3 15/16 7 5/8
12-642-(*) 6 3 1/2 6 3 3/4 7 1/2 5/8
12-643-(*) 6 4 6 4 5/8 8 1/2 5/8
12-644-(*) 6 4 1/2 6 4 3/4 9 1/8 5/8
12-645-(*) 6 5 6 5 1/16 9 5/8 5/8
12-646-(*) 6 6 6 6 11 5/8
P
U
PIPE RUN TO CABLE TAP 12-4
CABLE TAP DIMENSIONS IN INCHES

CATALOG IPS
NUMBER MAIN AWG MCM
A B C K
MIN MAX
12-647* 1/2 8 600 6 3 1/8 3 3/8
12-649* 3/4 8 600 6 1/4 3 1/8 2 3/4 1/2 & 3/8
12-651* 1 8 600 7 3 1/8 3 3/16 1/2 & 3/8
12-652 1 4/0 1000 7 3/4 3 3/4 3 3/16 1/2 

12-654* 1 1/4 8 600 6 1/2 3 1/8 3 1/8 1/2 & 3/8
12-655* 1 1/4 4/0 1000 6 3/4 3 3/4 3 1/8 1/2
12-657* 1 1/2 8 600 7 5/8 3 1/8 3 1/16 1/2 & 3/8

12-658* 1 1/2 4/0 1000 8 1/4 3 3/4 3 1/16 1/2
12-659 1 1/2 1000 1500 9 4 1/4 3 1/16 1/2 
12-661* 2 8 600 8 1/4 3 1/8 3 1/8 1/2 & 3/8


12-662* 2 4/0 1000 9 1/8 3 3/4 3 1/8 1/2

12-663 2 1000 1500 9 1/2 4 1/4 3 1/8 1/2
12-665* 2 1/2 8 600 9 1/2 3 1/8 4 5/8 & 3/8
12-666* 2 1/2 4/0 1000 10 3 3/4 4 5/8 & 1/2
12-667 2 1/2 1000 1500 10 1/2 4 1/4 4 5/8 & 1/2
12-670* 3 8 600 10 3 1/8 3 15/16 5/8 & 3/8
Cast of a copper alloy for
12-671* 3 4/0 1000 10 3/4 3 3/4 3 15/16 5/8 & 1/2
high conductivity and
12-672 3 1000 1500 11 1/4 4 1/4 3 15/16 5/8 & 1/2
natural resistance to stress,
12-675* 3 1/2 8 600 11 1/4 3 1/8 3 3/4 5/8 & 3/8
12-676* 3 1/2 4/0 1000 11 1/4 3 3/4 3 3/4 5/8 & 1/2
the type BTPC is a strong
12-677 3 1/2 1000 1500 11 3/4 4 1/4 3 3/4 5/8 & 1/2
and reliable connector in
12-680* 4 8 600 11 7/8 3 1/8 4 5/8 5/8 & 3/8 cases that require the
12-681* 4 4/0 1000 12 1/4 3 3/4 4 5/8 5/8 & 1/2 junction of a cable tap to
12-682 4 1000 1500 13 4 1/4 4 5/8 5/8 & 1/2 the pipe main.
12-685* 4 1/2 8 600 12 3/4 3 1/8 4 3/4 5/8 & 3/8 For clamping strength and
12-686* 4 1/2 4/0 1000 12 3/4 3 3/4 4 3/4 5/8 & 1/2
resistance to corrosion,
12-687 4 1/2 1000 1500 13 3/8 4 1/4 4 3/4 5/8 & 1/2
bolts, nuts, and lockwash-
12-690* 5 8 600 12 7/8 3 1/8 5 1/16 5/8 & 3/8
ers are made of silicon
12-691* 5 4/0 1000 13 1/4 3 3/4 5 1/16 5/8 & 1/2
12-692 5 1000 1500 13 3/4 4 1/4 5 1/16 5/8 & 1/2
bronze. In order to assist
12-695* 6 8 600 14 3 1/8 6 5/8 & 3/8
installation, all bolt heads
12-696* 6 4/0 1000 14 3/4 3 3/4 6 5/8 & 1/2 are recessed.
12-697 6 1000 1500 15 1/4 4 1/4 6 5/8 & 1/2
P
U
12-4A PIPE RUN TO CABLE TAP
ALUMINUM ACSR
CATALOG IPS CABLE TAP CABLE TAP
NUMBER MAIN AWG MCM AWG MCM
A B C K
When a more economical MIN MAX MIN MAX
and lightweight connector 12-699 1/2 4 954 4 795 6 7/8 4 4 1/2
is necessary for joining a 12-703* 3/4 4 954 4 795 7 5/8 4 2 3/4 1/2
cable tap to the pipe main, 12-707* 1 4 954 4 795 8 4 3 3/16 1/2
the type ATPC, which is 12-711* 1 1/4 4 954 4 795 8 1/4 4 3 1/8 1/2
made of an aluminum alloy, 12-715* 1 1/2 4 954 4 795 8 5/8 4 3 1/16 1/2
meets those requirements. 12-716 1 1/2 900 1272 715.5 1113 8 4 3 1/16 1/2
High tensile aluminum 12-719* 2 4 954 4 795 9 1/2 4 3 1/8 1/2
clamping hardware adds 12-720 2 900 1272 715.5 1113 9 3/8 3 5/8 3 1/8 5/8
strength and durability 12-723* 2 1/2 4 954 4 795 10 1/8 4 4 5/8 & 1/2
to the connector which, 12-724 2 1/2 900 1272 715.5 1113 10 1/2 3 5/8 4 5/8 & 1/2
for greater convenience, 12-725 2 1/2 1272 1590 1113 1272 11 4 1/4 4 5/8 & 1/2
offers captivated bolt
12-728* 3 4 954 4 795 11 1/4 4 3 15/16 5/8 & 1/2
heads that permit single-
12-729* 3 900 1272 715.5 1113 11 3 5/8 3 15/16 5/8 & 1/2
wrench installation.
12-730 3 1272 1590 1113 1272 11 3/4 4 1/4 3 15/16 5/8 & 1/2

12-733*
 3 1/2 4 954 4 795 11 1/2 4 3 3/4 5/8 & 1/2
12-734 3 1/2 900 1272 715.5 1113 11 1/8 3 5/8 3 3/4 5/8 & 1/2
12-735 3 1/2 1272 1590 1113 1272 11 7/8 4 1/4 3 3/4 5/8 & 1/2
 12-737* 4 4 954 4 795 12 1/2 4 4 5/8 5/8 & 1/2

 12-738 4 900 1272 715.5 1113 12 1/2 3 5/8 4 5/8 5/8 & 1/2
 

12-739 4 1272 1590 1113 1272 12 3/4 4 1/4 4 5/8 5/8 & 1/2
 12-740 4 1590 2000 1272 1590 13 1/2 4 1/2 4 5/8 5/8
  12-742* 4 1/2 4 954 4 795 12 5/8 4 4 3/4 5/8 & 1/2

12-743 4 1/2 900 1272 715.5 1113 12 5/8 3 5/8 4 3/4 5/8 & 1/2

12-744 4 1/2 1272 1590 1113 1272 14 5/8 4 1/4 4 3/4 5/8 & 1/2
  12-745 4 1/2 1590 2000 1272 1590 15 1/4 4 1/2 4 3/4 5/8
  12-747* 5 4 954 4 795 13 4 5 1/16 5/8 & 1/2
12-748 5 900 1272 715.5 1113 13 3/4 3 5/8 5 1/16 5/8 & 1/2
12-749 5 1272 1590 1113 1272 14 5/8 4 1/4 5 1/16 5/8 & 1/2
12-750 5 1590 2000 1272 1590 14 1/2 4 1/2 5 1/16 5/8
12-752* 6 4 954 4 795 15 5/8 4 6 5/8 & 1/2
Wide Range denoted by: * 12-753 6 900 1272 715.5 1113 14 3/4 3 5/8 6 5/8 & 1/2
12-754 6 1272 1590 1113 1272 15 1/4 4 1/4 6 5/8 & 1/2
12-755 6 1590 2000 1272 1590 15 1/2 4 1/2 6 5/8
P
U
PIPE RUN TO DOUBLE CABLE TAP 12-4-2T
* Please indicate either side by side “IL“ or back to back “BB“ orientation

CATALOG IPS
NUMBER MAIN AWG MCM
A B C D
MIN MAX
12-647-2T* 1/2 8 600 6 1/2 3 1/8 3 1 1/2
12-649-2T* 3/4 8 600 6 1/2 3 1/8 2 3/4 1 1/2
12-651-2T* 1 8 600 7 3 1/8 3 3/16 1 1/2
12-652-2T* 1 4/0 1000 7 3/4 3 3/4 3 3/16 2
12-654-2T* 1 1/4 8 600 8 1/4 3 1/8 3 1/8 1 1/2
12-655-2T* 1 1/4 4/0 1000 8 1/4 3 3/4 3 1/8 2
12-657-2T* 1 1/2 8 600 7 1/2 3 1/8 3 1/16 1 1/2
12-658-2T* 1 1/2 4/0 1000 8 1/2 3 3/4 3 1/16 2
12-659-2T* 1 1/2 1000 1500 8 5/8 4 1/4 3 1/16 3 1/2 Cast of a copper
alloy for high conductivity and
12-661-2T* 2 8 600 8 1/4 3 1/8 3 1/8 1 1/2
natural resistance to stress,
12-662-2T* 2 4/0 1000 9 3 3/4 3 1/8 2 the Type BTPC2 is a strong
12-663-2T* 2 1000 1500 9 5/8 4 1/4 3 1/8 3 1/2 and reliable connector in
cases that require the junction
12-665-2T* 2 1/2 8 600 9 1/4 3 1/8 4 1 1/2
of a double cable tap to a pipe
12-666-2T* 2 1/2 4/0 1000 10 3 3/4 4 3 1/2 main. For clamping strength
12-667-2T* 2 1/2 1000 1500 10 3/8 4 1/4 4 3 1/2 and resistance to corrosion,
12-670-2T* 3 8 600 10 1/8 3 1/8 3 15/16 1 1/2
bolts, nuts, and lockwashers
are made of silicon bronze. In
12-671-2T* 3 4/0 1000 10 7/8 3 3/4 3 15/16 2 order to assist installation, all
12-672-2T* 3 1000 1500 12 1/2 4 1/4 3 15/16 4 bolt heads are
12-675-2T* 3 1/2 8 600 10 5/8 3 1/8 3 3/4 1 1/2 recessed.
12-676-2T* 3 1/2 4/0 1000 11 3/8 3 3/4 3 3/4 2

12-677-2T* 3 1/2 1000 1500 11 3/4 4 1/4 3 3/4 3 1/2
For side by side
12-680-2T* 4 8 600 11 5/8 3 1/8 4 5/8 1 1/2 orientation use
12-681-2T* 4 4/0 1000 12 3/8 3 3/4 4 5/8 2 suffix “-2T-IL”
12-682-2T* 4 1000 1500 12 3/4 4 1/4 4 5/8 3 1/2
12-685-2T* 4 1/2 8 600 12 1/8 3 1/8 4 3/4 1 1/2
12-686-2T* 4 1/2 4/0 1000 12 7/8 3 3/4 4 3/4 2
12-687-2T* 4 1/2 1000 1500 13 1/4 4 1/4 4 3/4 3 1/2
For back to back
12-690-2T* 5 8 600 12 3/4 3 1/8 5 1/16 1 1/2 orientation use
12-691-2T* 5 4/0 1000 13 1/2 3 3/4 5 1/16 2 suffix “-2T-BB”
12-692-2T* 5 1000 1500 13 7/8 4 1/4 5 1/16 3 1/2

12-695-2T* 6 8 600 14 1/8 3 1/8 6 1 1/2
12-696-2T* 6 4/0 1000 14 7/8 3 3/4 6 2
12-697-2T* 6 1000 1500 15 1/4 4 1/4 6 3 1/2
P
U
12-4A-2T PIPE RUN TO DOUBLE CABLE TAP
* Please indicate either side by side “IL“ or back to back “BB“ orientation
ALUMINUM ASCR
NUMBER MAIN AWG MCM AWG MCM
A B C D
MIN MAX MIN MAX
12-647-2T* 1/2 4 954 4 795 6 4 2 7/8 3 1/4
12-703-2T* 3/4 4 954 4 795 6 3/4 4 2 3/4 3 1/4
12-707-2T* 1 4 954 4 795 7 4 3 3/16 3 1/4
12-711-2T* 1 1/4 4 954 4 795 7 1/2 4 3 1/8 3 1/4
12-715-2T* 1 1/2 4 954 4 795 8 1/4 4 3 1/16 3 1/4
12-716-2T* 1 1/2 900 1272 715.5 1113 8 1/2 3 5/8 3 1/16 3 3/4
12-719-2T* 2 4 954 4 795 8 3/4 4 3 1/8 3 1/4
12-720-2T* 2 900 1272 715.5 1113 9 3 5/8 3 1/8 3 3/4
12-723-2T* 2 1/2 4 954 4 795 9 3/4 4 4 3 1/4
To join a single pipe main
to two cable taps use the 12-724-2T* 2 1/2 900 1272 715.5 1113 10 3 5/8 4 3 3/4
type ATPC2. High tensile 12-725-2T* 2 1/2 1272 1590 1113 1272 10 1/2 4 1/4 4 3 1/2
aluminum clamping hard- 12-728-2T* 3 4 954 4 795 11 1/4 4 3 15/16 3 1/4

ware adds strength and 12-729-2T* 3 900 1272 715.5 1113 11 1/4 3 5/8 3 15/16 3 3/4
durability to the connector 12-730-2T* 3 1272 1590 1113 1272 11 1/4 4 1/4 3 15/16 3 1/2
which, for greater 12-733-2T* 3 1/2 4 954 4 795 11 3/4 4 3 3/4 3 1/4
convenience, offers 12-734-2T* 3 1/2 900 1272 715.5 1113 11 1/2 3 5/8 3 3/4 3 3/4
captivated bolt heads that 12-735-2T* 3 1/2 1272 1590 1113 1272 12 4 1/4 3 3/4 3 1/2
permit single-wrench 12-737-2T* 4 4 954 4 795 13 4 4 5/8 3 1/2
installation. 12-738-2T* 4 900 1272 715.5 1113 12 3 5/8 4 5/8 3 3/4
12-739-2T* 4 1272 1590 1113 1272 13 4 1/4 4 5/8 3 3/4
12-740-2T* 4 1590 2000 1272 1590 13 3/8 4 1/2 4 5/8 4
For side by side
12-742-2T* 4 1/2 4 954 4 795 12 1/4 4 4 3/4 3 1/4
orientation use
suffix “-2T-IL” 12-743-2T* 4 1/2 900 1272 715.5 1113 12 1/2 3 5/8 4 3/4 3 3/4
12-744-2T* 4 1/2 1272 1590 1113 1272 13 4 1/4 4 3/4 3 1/2
12-745-2T* 4 1/2 1590 2000 1272 1590 13 1/4 4 1/2 4 3/4 4
12-747-2T* 5 4 954 4 795 12 3/4 4 5 1/16 3 1/4
For back to back 12-748-2T* 5 900 1272 715.5 1113 13 3 5/8 5 1/16 3 3/4
orientation use
suffix “-2T-BB” 12-749-2T* 5 1272 1590 1113 1272 13 1/2 4 1/4 5 1/16 3 1/2
12-750-2T* 5 1590 2000 1272 1590 13 3/4 4 1/2 5 1/16 4
12-752-2T* 6 4 954 4 795 13 3/4 4 6 3 1/4
12-753-2T* 6 900 1272 715.5 1113 14 3 5/8 6 3 3/4
12-754-2T* 6 1272 1590 1113 1272 14 1/2 4 1/4 6 3 1/2
12-755-2T* 6 1590 2000 1272 1590 14 3/4 4 1/2 6 4
P
U
PIPE RUN TO PAD TAP 12-5
CATALOG IPS PAD DIMENSIONS IN INCHES

NUMBER MAIN STYLE A B C D K
12-757 1/2 B 5 1/2 3 2 1/4 3/8 3/8
12-758 1/2 C 5 1/2 3 2 1/4 3/8 3/8
12-759 1/2 D 6 1/2 3 2 1/4 3/8 3/8

12-760 3/4 B 6 3/4 2 3/4 3 3/8 3/8 1/2
12-761 3/4 C 6 3/4 2 3/4 3 3/8 3/8 1/2
12-762 3/4 D 7 1/8 2 3/4 3 3/8 3/8 1/2

12-763 1 B 7 1/8 3 3/16 3 7/8 3/8 1/2

12-764 1 C 7 1/8 3 3/16 3 7/8 3/8 1/2
 
12-765 1 D 8 1/8 3 3/16 3 7/8 3/8 1/2
12-766 1 1/4 B 7 3/4 3 1/8 4 5/16 3/8 1/2 
12-767 1 1/4 C 8 1/2 3 1/8 4 5/16 3/8 1/2
12-768 1 1/4 D 9 1/2 3 1/8 4 5/16 3/8 1/2 
12-771 1 1/2 B 7 5/8 3 1/16 4 3/8 5/8 1/2

12-772 1 1/2 C 7 5/8 3 1/16 4 3/8 5/8 1/2
12-773 1 1/2 D 8 5/8 3 1/16 4 3/8 5/8 1/2 The type BTPB connector
12-776 2 B 8 1/8 3 1/4 5 1/8 1/2 1/2 joins copper pipe to
12-777 2 C 8 1/2 3 1/4 5 1/8 1/2 1/2 copper flat pad. This tee
12-778 2 D 9 1/8 3 1/4 5 1/8 1/2 1/2 connector offers strength
12-781 2 1/2 B 9 1/8 4 1/8 6 1/8 1/2 5/8 and durability with its
12-782 2 1/2 C 9 1/8 4 1/8 6 1/8 1/2 5/8 high conductivity copper
12-783 2 1/2 D 10 1/2 4 1/8 6 1/8 5/8 5/8 alloy casting and clamping
12-786 3 B 10 3/8 4 7 5/8 5/8
hardware made of silicon
12-787 3 C 10 1/4 4 7 5/8 5/8
bronze. This connector
12-788 3 D 11 1/4 4 7 5/8 5/8
like the others, features
recessed bolt heads for
12-792 3 1/2 B 10 1/2 3 3/4 7 1/2 3/4 5/8
12-793 3 1/2 C 10 1/2 3 3/4 7 1/2 3/4 5/8
12-794 3 1/2 D 11 3/4 3 3/4 7 1/2 3/4 5/8
12-798 4 B 11 1/4 4 5/8 8 1/2 3/4 5/8
12-799 4 C 11 1/4 4 5/8 8 1/2 3/4 5/8
12-800 4 D 12 1/2 4 5/8 8 1/2 3/4 5/8
12-804 4 1/2 B 12 1/8 4 3/4 9 1/8 3/4 5/8
12-805 4 1/2 C 12 1/8 4 3/4 9 1/8 3/4 5/8
12-806 4 1/2 D 13 1/8 4 3/4 9 1/8 3/4 5/8
12-810 5 B 13 1/4 5 1/16 9 5/8 1 5/8
12-811 5 C 13 1/4 5 1/16 9 5/8 1 5/8
12-812 5 D 14 1/4 5 1/16 9 5/8 1 5/8
12-816 6 B 14 6 11 1 1/8 5/8
12-817 6 C 14 6 11 1 1/8 5/8
12-818 6 D 15 6 11 1 1/8 5/8
P
U
12-5A PIPE RUN TO FLAT PAD TAP
CATALOG IPS PAD
NUMBER MAIN STYLE
A B C D K
12-824 1/2 B 5 1/2 4 2 7/8 3/8 1/2
12-825 1/2 C 5 1/2 4 2 7/8 3/8 1/2
12-826 1/2 D 6 1/2 4 2 7/8 3/8 1/2
12-827 3/4 B 6 3/4 2 3/4 3 3/8 3/8 1/2
12-828 3/4 C 6 3/4 2 3/4 3 3/8 3/8 1/2
12-829 3/4 D 7 1/8 2 3/4 3 3/8 3/8 1/2
 12-830 1 B 7 1/8 3 3/16 3 7/8 3/8 1/2
12-831 1 C 7 1/8 3 3/16 3 7/8 3/8 1/2
12-832 1 D 8 1/4 3 3/16 3 7/8 3/8 1/2

12-833 1 1/4 B 7 5/8 3 1/8 4 5/16 3/8 1/2
 12-834 1 1/4 C 7 5/8 3 1/8 4 5/16 3/8 1/2
  12-835 1 1/4 D 8 5/8 3 1/8 4 5/16 3/8 1/2
12-837 1 1/2 B 7 5/8 3 1/16 4 3/8 1/2 1/2

12-838 1 1/2 C 7 5/8 3 1/16 4 3/8 1/2 1/2
12-839 1 1/2 D 8 3/4 3 1/16 4 3/8 1/2 1/2

12-842 2 B 8 1/2 3 1/8 5 1/8 1/2 1/2
12-843 2 C 8 1/2 3 1/8 5 1/8 1/2 1/2
12-844 2 D 9 1/2 3 1/8 5 1/8 1/2 1/2
12-847 2 1/2 B 10 1/2 4 6 1/8 1/2 5/8
12-848 2 1/2 C 10 1/2 4 6 1/8 1/2 5/8
12-849 2 1/2 D 11 4 6 1/8 1/2 5/8
12-852 3 B 10 3/8 3 15/16 7 5/8 5/8
Manufactured of a strong,
12-853 3 C 10 1/4 3 15/16 7 5/8 5/8
lightweight aluminum
12-854 3 D 11 7/8 3 15/16 7 5/8 5/8
alloy, the type ATPB joins
12-858 3 1/2 B 10 1/2 3 3/4 7 1/2 3/4 5/8
aluminum pipe main to
12-859 3 1/2 C 10 1/2 3 3/4 7 1/2 3/4 5/8
aluminum flat pad.
12-860 3 1/2 D 11 3/4 3 3/4 7 1/2 3/4 5/8
For clamping strength 12-864 4 B 11 1/2 4 5/8 8 1/2 3/4 5/8
and resistance to corro- 12-865 4 C 11 1/2 4 5/8 8 1/2 3/4 5/8
sion, bolts, nuts, and 12-866 4 D 12 1/2 4 5/8 8 1/2 3/4 5/8
lockwashers are high 12-870 4 1/2 B 12 1/8 4 3/4 9 1/8 3/4 5/8
tensile aluminum. To 12-871 4 1/2 C 12 1/8 4 3/4 9 1/8 3/4 5/8
facilitate installation, all 12-872 4 1/2 D 13 1/8 4 3/4 9 1/8 3/4 5/8
bolt heads are recessed. 12-876 5 B 13 1/8 5 1/16 9 5/8 1 5/8
12-877 5 C 13 1/8 5 1/16 9 5/8 1 5/8
12-878 5 D 14 3/8 5 1/16 9 5/8 1 5/8
12-882 6 B 14 6 11 1 1/8 5/8
12-883 6 C 14 6 11 1 1/8 5/8
12-884 6 D 15 6 11 1 1/8 5/8
P
U
CABLE RUN TO CABLE TAP 12-6
CABLE MAIN CABLE TAP DIMENSIONS IN INCHES

CATALOG
NUMBER AWG MCM AWG MCM
A B C K
MIN MAX MIN MAX
12-890* 8 600 8 600 5 3/8 3 1/8 2 1/4 3/8
12-892* 4/0 1000 8 600 6 1/8 3 1/8 3 3/8
12-893* 4/0 1000 4/0 1000 6 3/4 3 3/4 3 1/2
12-895* 1000 1500 8 600 6 1/8 3 1/8 3 1/2
12-896* 1000 1500 4/0 1000 7 1/8 3 3/4 3 3/8 1/2
12-897 1000 1500 1000 1500 7 1/4 4 1/4 3 1/2
12-899* 1500 2000 8 600 6 7/8 3 1/8 3 3/4 1/2
12-900* 1500 2000 4/0 1000 7 1/2 3 3/4 3 3/4 1/2
12-901 1500 2000 1000 1500 8 4 1/4 3 3/4 1/2
12-902 1500 2000 1500 2000 8 7/8 5 1/8 3 3/4 1/2

The type BTCC which

 effectively joins a cable tap
to another cable relies on
its high conductivity copper
alloy for strength and durability.

Bolts, nuts, and lockwashers
of silicon bronze for more
dependable clamping efficiency
 and resistance to corrosion.

Bolt heads are captivated to
facilitate single-wrench
installation.
P
U
12-6A CABLE RUN TO CABLE TAP
ALUMINUM ALUMINUM ACSR ACSR

CATALOG CABLE MAIN CABLE TAP CABLE MAIN CABLE TAP
NUMBER AWG MCM AWG MCM AWG MCM AWG MCM
A B C K
MIN MAX MIN MAX MIN MAX MIN MAX
12-908* 4 954 4 954 4 795 4 795 6 7/8 4 2 7/8 1/2
12-915* 900 1272 4 954 715.5 1113 4 795 7 1/2 4 3 1/2 1/2
12-917 900 1272 900 1272 715.5 1113 715.5 1113 7 1/8 3 5/8 3 1/2 1/2
12-920* 1272 1590 4 954 1113 1272 4 795 7 3/8 4 3 3/8 1/2
12-922 1272 1590 900 1272 1113 1272 715.5 1113 7 3 5/8 3 3/8 1/2
12-923 1272 1590 1272 1590 1113 1272 1113 1272 7 5/8 4 1/4 3 3/8 1/2
12-926* 1590 2000 4 954 1272 1590 4 795 7 3/4 4 3 3/4 5/8 & 1/2
12-927 1590 2000 900 1272 1272 1590 715.5 1113 7 3/8 3 5/8 3 3/4 5/8 & 1/2
12-928 1590 2000 1272 1590 1272 1590 1113 1272 8 4 1/4 3 3/4 5/8 & 1/2
12-929 1590 2000 1590 2000 1272 1590 1272 1590 8 1/4 4 1/2 3 3/4 5/8
Connecting a cable tap to the cable main can be 

accomplished with efficiency and economy when 

the type ATTC is employed.
Cast of a lightweight aluminum alloy, it includes bolts,
nuts, and lockwashers made of high tensile aluminum

for clamping strength and resistance to wear.
To facilitate single-wrench installation, all bolt heads 

are captivated.
P
U
CABLE RUN TO PIPE TAP 12-7
CABLE MAIN DIMENSIONS IN INCHES

CATALOG PIPE
NUMBER AWG MCM TAP
A B C K
MIN MAX 
12-932* 8 600 3/4 5 2 3/4 2 1/4 3/8 & 1/2


12-933* 4/0 1000 3/4 5 3/4 2 3/4 3 1/2

12-935* 8 600 1 5 7/16 3 3/16 2 1/4 3/8 & 1/2 

12-936* 4/0 1000 1 6 3/16 3 3/16 3 1/2
12-938* 8 600 1 1/4 5 3/8 3 1/8 2 1/4 3/8 & 1/2
12-939* 4/0 1000 1 1/4 6 1/8 3 1/8 3 1/2
12-940* 8 600 1 1/2 5 5/16 3 1/16 2 1/4 3/8 & 1/2


12-941* 4/0 1000 1 1/2 6 1/16 3 1/16 3 1/2
12-942* 8 600 2 5 3/8 3 1/8 2 1/4 3/8 & 1/2
12-943* 4/0 1000 2 6 1/8 3 1/8 3 1/2

Designed to connect a pipe
12-944 1000 1500 2 6 1/2 3 1/8 3 3/8 1/2
tap to a cable with maximum
12-945 4/0 1000 2 1/2 7 4 3 1/2 & 5/8 dependability, the type BTCP
12-946 1000 1500 2 1/2 7 3/8 4 3 3/8 1/2 & 5/8 is cast of a copper alloy for
12-947 1500 2000 2 1/2 7 3/4 4 3 3/4 1/2 & 5/8 high conductivity and natural
resistance to corrosion and
stress.
Silicon bronze clamping
hardware reinforces the
strength and durability of
the connector. Recessed
bolt heads are conveniently
provided to expedite
installation.
P
U
12-7A CABLE RUN TO PIPE TAP
ALUMINUM ACSR
CATALOG CABLE MAIN MAIN PIPE
NUMBER AWG MCM AWG MCM TAP
A B C K
MIN MAX MIN MAX
12-957* 4 954 4 795 1/2 5 3/4 2 7/8 2 7/8 1/2
12-958* 4 954 4 795 3/4 5 5/8 2 3//4 2 7/8 1/2
12-959* 4 954 4 795 1 6 1/16 3 3/16 2 7/8 1/2
12-960* 4 954 4 795 1 1/4 6 3 1/8 2 7/8 1/2
12-961* 4 954 4 795 1 1/2 5 15/16 3 1/16 2 7/8 1/2
12-962* 4 954 4 795 2 6 3 1/8 2 7/8 1/2
Inexpensive and 12-963 900 1272 715.5 1113 1/2 6 3/8 2 7/8 3 1/2 1/2
lightweight because 12-964 900 1272 715.5 1113 3/4 6 1/4 2 3/4 3 1/2 1/2
of its aluminum alloy 12-965 900 1272 715.5 1113 1 6 11/16 3 3/16 3 1/2 1/2
casting, the type ATCP 12-966 900 1272 715.5 1113 1 1/4 6 5/8 3 1/8 3 1/2 1/2
joins a pipe tap to a 12-967 900 1272 715.5 1113 1 1/2 6 9/16 3 1/16 3 1/2 1/2
cable main. 12-968 900 1272 715.5 1113 2 6 5/8 3 1/8 3 1/2 1/2
12-969 900 1272 715.5 1113 2 1/2 7 1/2 4 3 1/2 1/2 & 3/8
Clamping hardware is 12-970 1272 1590 1113 1272 1/2 6 1/4 2 7/8 3 3/8 1/2
made of high-tensile 12-971 1272 1590 1113 1272 3/4 6 7/8 2 3/4 3 3/8 1/2
aluminum. 12-972 1272 1590 1113 1272 1 6 9/16 3 3/16 3 3/8 1/2
12-973 1272 1590 1113 1272 1 1/4 6 1/2 3 1/8 3 3/8 1/2
All bolt heads are
12-974 1272 1590 1113 1272 1 1/2 6 7/16 3 1/16 3 3/8 1/2
recessed for easier
12-975 1272 1590 1113 1272 2 6 1/2 3 1/8 3 3/8 1/2
single-wrench
12-976 1272 1590 1113 1272 2 1/2 7 3/8 4 3 3/8 5/8 & 1/2
installation. 12-977 1272 1590 1113 1272 3 7 5/16 3 15/16 3 3/8 5/8 & 1/2
12-978 1590 2000 1272 1590 1/2 6 5/8 2 7/8 3 3/4 5/8 & 1/2
12-979 1590 2000 1272 1590 3/4 6 1/2 2 3/4 3 3/4 5/8 & 1/2
12-980 1590 2000 1272 1590 1 6 15/16 3 3/16 3 3/4 5/8 & 1/2
12-981 1590 2000 1272 1590 1 1/4 6 7/8 3 1/8 3 3/4 5/8 & 1/2
12-982 1590 2000 1272 1590 1 1/2 6 13/16 3 1/16 3 3/4 5/8 & 1/2
12-983 1590 2000 1272 1590 2 6 7/8 3 1/8 3 3/4 5/8 & 1/2
12-984 1590 2000 1272 1590 2 1/2 7 3/4 4 3 3/4 5/8 & 1/2
12-985 1590 2000 1272 1590 3 7 11/16 3 15/16 3 3/4 5/8 & 1/2
P
U
CABLE RUN TO FLAT PAD TAP 12-8
 
A rugged, dependable
CABLE MAIN DIMENSIONS IN INCHES connector cast of copper
CATALOG PAD
NUMBER AWG MCM STYLE alloy for high conductivity
A B C K and natural resistance to
MIN MAX
12-1080* 8 600 B 6 3 1/8 1/2 3/8 corrosion and stress, the
type BTCB couples a cable
12-1081* 8 600 C 5 1/2 3 1/8 3/8 3/8
run to a single bar tap.
12-1082* 8 600 D 6 1/2 3 1/8 3/8 3/8
All bolts, nuts, and lock-
12-1086* 4/0 1000 B 6 1/4 3 3/4 5/8 1/2 washers made of high
12-1087* 4/0 1000 C 6 1/4 3 3/4 5/8 1/2 strength silicon bronze
12-1088* 4/0 1000 D 7 1/4 3 3/4 5/8 1/2 insure clamping efficiency.
Bolt heads are captivated.
12-1089 1000 1500 B 6 3/4 4 1/4 5/8 1/2
12-1090 1000 1500 C 6 3/4 4 1/4 5/8 1/2
12-1091 1000 1500 D 7 1/4 4 1/4 5/8 1/2
12-1092 1500 2000 B 7 5 1/8 5/8 1/2
12-1093 1500 2000 C 7 5 1/8 5/8 1/2
12-1094 1500 2000 D 8 5 1/8 5/8 1/2
For double run bronze tee connectors use suffix (-2COND) Wide Range denoted by: *
EX: 12-1090-2COND
P
U
12-8A CABLE RUN TO FLAT PAD TAP

CABLE MAIN
CATALOG AAC ACSR PAD
NUMBER AWG MCM AWG MCM STYLE
A B C K
 
MIN MAX MIN MAX
12-1101* 4 954 4 795 B 5 7/8 4 5/8 1/2

12-1102* 4 954 4 795 C 6 1/4 4 3/4 1/2
12-1103* 4 954 4 795 D 7 1/4 4 5/8 1/2
12-1107* 900 1272 715.5 1113 B 6 3/4 3 5/8 5/8 1/2
The type ATCB is a
rugged dependable 12-1108* 900 1272 715.5 1113 C 6 3/4 3 5/8 5/8 1/2
connector for joining 12-1109* 900 1272 715.5 1113 D 7 1/4 3 5/8 5/8 1/2
a cable run to a single 12-1110 1272 1590 1113 1272 B 6 5/8 4 1/4 5/8 1/2
bar tap.
12-1111 1272 1590 1113 1272 C 6 5/8 4 1/4 5/8 1/2
Aluminum clamping
12-1112 1272 1590 1113 1272 D 8 4 1/4 5/8 1/2
hardware adds
strength and durability 12-1113 1590 2000 1272 1590 B 6 3/4 4 1/2 5/8 5/8
to this tee connector 12-1114 1590 2000 1272 1590 C 6 3/4 4 1/2 5/8 5/8
which features capti- 12-1115 1590 2000 1272 1590 D 8 4 1/2 5/8 5/8
vated bolt heads.
EX: 12-1111-2COND EX: 12-1111-2COND(BB)

Specify if a specific spacing is desired.
Wide Range denoted by: * For 6” spacing, EX: 12-1111-2C-6
P
U
BRONZE COUPLER-REDUCERS, SECTION
PIPE TO PIPE 13-1

IPS MAIN IPS TAP
NUMBER A B C K
13-101 1/2 1/2 6 3 3 3/8
13-102 3/4 1/2 5 3/4 2 3/4 3 1/2 & 3/8
13-103 3/4 3/4 5 1/2 2 3/4 2 3/4 1/2

13-104 1 1/2 6 3/16 3 3/16 3 1/2 & 3/8
13-105 1 3/4 5 7/16 3 3/16 2 3/4 1/2

13-106 1 1 6 3/8 3 3/16 3 3/16 1/2
13-107 1 1/4 1/2 6 1/8 3 1/8 3 3/8 & 1/2

13-108 1 1/4 3/4 5 7/8 3 1/8 2 3/4 1/2
13-109 1 1/4 1 6 5/16 3 1/8 3 3/16 1/2

13-110 1 1/4 1 1/4 6 1/4 3 1/8 3 1/8 1/2
13-111 1 1/2 1/2 6 1/16 3 1/16 3 1/2 & 3/8
13-112 1 1/2 3/4 5 13/16 3 1/16 2 3/4 1/2
13-113 1 1/2 1 6 1/4 3 1/16 3 3/16 1/2
13-114 1 1/2 1 1/4 6 3/16 3 1/16 3 1/8 1/2
13-115 1 1/2 1 1/2 6 1/8 3 1/16 3 1/16 1/2
13-116 2 3/4 5 7/8 3 1/8 2 3/4 1/2
13-117 2 1 6 5/16 3 1/8 3 3/16 1/2 The type BRPP coupler-
13-118 2 1 1/4 6 1/4 3 1/8 3 1/8 1/2 reducer combines the
13-119 2 1 1/2 6 3/16 3 1/8 3 1/16 1/2 rugged durability and high
13-120 2 2 6 1/4 3 1/8 3 1/8 1/2 conductivity of its copper
13-121 2 1/2 3/4 6 3/4 4 2 3/4 5/8 & 1/2 alloy casting with high
13-122 2 1/2 1 7 3/16 4 3 3/16 5/8 & 1/2 strength silicon bronze
13-123 2 1/2 1 1/4 7 1/8 4 3 1/8 5/8 & 1/2
clamping hardware.
13-124 2 1/2 1 1/2 7 1/16 4 3 1/16 5/8 & 1/2
13-125 2 1/2 2 7 1/8 4 3 1/8 5/8 & 1/2 Bolt heads are recessed
13-126 2 1/2 2 1/2 5 1/2 4 4 5/8 to permit single-wrench
13-127 3 1 7 1/8 3 15/16 3 3/16 5/8 & 1/2 installation.
13-128 3 1 1/4 7 1/16 3 15/16 3 1/8 5/8 & 1/2
13-129 3 1 1/2 7 3 15/16 3 1/16 5/8 & 1/2
13-130 3 2 7 1/16 3 15/16 3 1/8 5/8 & 1/2
13-131 3 2 1/2 7 15/16 3 15/16 4 5/8
13-132 3 3 7 7/8 3 15/16 3 15/16 5/8
13-133 3 1/2 1 1/4 6 7/8 3 3/4 3 1/8 5/8 & 1/2
13-134 3 1/2 1 1/2 6 13/16 3 3/4 3 1/16 5/8 & 1/2
13-135 3 1/2 2 6 7/8 3 3/4 3 1/8 5/8 & 1/2
13-136 3 1/2 2 1/2 7 3/4 3 3/4 4 5/8
13-137 3 1/2 3 7 11/16 3 3/4 3 15/16 5/8
13-138 3 1/2 3 1/2 7 1/2 3 3/4 3 3/4 5/8

P
U
SECTION BRONZE COUPLER-REDUCERS,
13-1 PIPE TO PIPE, continued

 NUMBER MAIN TAP A B C K
13-139 4 1 1/2 7 11/16 4 5/8 3 1/16 5/8 & 1/2
 13-140 4 2 7 3/4 4 5/8 3 1/8 5/8 & 1/2
13-141 4 2 1/2 8 5/8 4 5/8 4 5/8

13-142 4 3 8 9/16 4 5/8 3 15/16 5/8
13-143 4 3 1/2 8 3/8 4 5/8 3 3/4 5/8
 13-144 4 4 9 1/4 4 5/8 4 5/8 5/8
13-145 4 1/2 1 1/2 7 13/16 4 3/4 3 1/16 5/8 & 1/2
13-146 4 1/2 2 7 7/8 4 3/4 3 1/8 5/8 & 1/2
13-147 4 1/2 2 1/2 8 3/4 4 3/4 4 5/8
13-148 4 1/2 3 8 11/16 4 3/4 3 15/16 5/8
13-149 4 1/2 3 1/2 8 1/2 4 3/4 3 3/4 5/8
13-150 4 1/2 4 9 3/8 4 3/4 4 5/8 5/8
The type BRPP coupler-
13-151 4 1/2 4 1/2 9 1/2 4 3/4 4 3/4 5/8
reducer combines the rugged 13-152 5 2 8 3/16 5 1/16 3 1/8 5/8 & 1/2
durability and high conductivity 13-153 5 2 1/2 9 1/16 5 1/16 4 5/8
of its copper alloy casting 13-154 5 3 9 5 1/16 3 15/16 5/8
with high strength silicon 13-155 5 3 1/2 8 13/16 5 1/16 3 3/4 5/8
bronze clamping hardware. 13-156 5 4 9 11/16 5 1/16 4 5/8 5/8
13-157 5 4 1/2 9 13/16 5 1/16 4 3/4 5/8
Bolt heads are recessed 13-158 5 5 10 1/8 5 1/16 5 1/16 5/8
to permit single-wrench 13-159 6 2 1/2 10 6 4 5/8
installation. 13-160 6 3 9 15/16 6 3 15/16 5/8
13-161 6 3 1/2 9 3/4 6 3 3/4 5/8
13-162 6 4 10 5/8 6 4 5/8 5/8
13-163 6 4 1/2 10 3/4 6 4 3/4 5/8
13-164 6 5 11 1/16 6 5 1/16 5/8
13-165 6 6 12 6 6 5/8
P
U
ALUMINUM COUPLER-REDUCERS, SECTION
PIPE TO PIPE 13-1A

IPS TAP
NUMBER MAIN A B C K 
13-166 1/2 1/2 8 4 4 1/2
13-167 3/4 1/2 6 3/4 2 3/4 4 1/2 
13-168 3/4 3/4 5 1/2 2 3/4 2 3/4 1/2
13-169 1 1/2 7 3/16 3 3/16 4 1/2 
13-170 1 3/4 5 15/16 3 3/16 2 3/4 1/2
13-171 1 1 6 3/8 3 3/16 3 3/16 1/2 
13-172 1 1/4 1/2 7 1/8 3 1/8 4 1/2
13-173 1 1/4 3/4 5 7/8 3 1/8 2 3/4 1/2
13-174 1 1/4 1 6 5/16 3 1/8 3 3/16 1/2
13-175 1 1/4 1 1/4 6 1/4 3 1/8 3 1/8 1/2
13-176 1 1/2 1/2 7 1/16 3 1/16 4 1/2
13-177 1 1/2 3/4 5 13/16 3 1/16 2 3/4 1/2
13-178 1 1/2 1 6 1/4 3 1/16 3 3/16 1/2
13-179 1 1/2 1 1/4 6 3/16 3 1/16 3 1/8 1/2 Cast of a lightweight
13-180 1 1/2 1 1/2 6 1/8 3 1/16 3 1/16 1/2 aluminum alloy, Type ARPP
13-181 2 3/4 5 7/8 3 1/8 2 3/4 1/2
13-182 2 1 6 5/16 3 1/8 3 3/16 1/2
couples pipes of the same
13-183 2 1 1/4 6 1/4 3 1/8 3 1/8 1/2 or different sizes end on
13-184 2 1 1/2 6 3/16 3 1/8 3 1/16 1/2 end. Bolts, nuts, and
13-185 2 2 6 1/4 3 1/8 3 1/8 1/2 lockwashers made of high
13-186 2 1/2 3/4 6 3/4 4 2 3/4 5/8 & 1/2
13-187 2 1/2 1 7 3/16 4 3 3/16 5/8 & 1/2
tensile aluminum provide
13-188 2 1/2 1 1/4 7 1/8 4 3 1/8 5/8 & 1/2 clamping efficiency and
13-189 2 1/2 1 1/2 7 1/16 4 3 1/16 5/8 & 1/2 resistance to corrosion. All
13-190 2 1/2 2 7 1/8 4 3 1/8 5/8 & 1/2 bolt heads are captivated for
13-191 2 1/2 2 1/2 8 4 4 5/8
13-192 3 1 7 1/8 3 15/16 3 3/16 5/8 & 1/2
13-193 3 1 1/4 7 1/16 3 15/16 3 1/8 5/8 & 1/2
13-194 3 1 /2 7 3 15/16 3 1/16 5/8 & 1/2
13-195 3 2 7 1/16 3 15/16 3 1/8 5/8 & 1/2
13-196 3 2 1/2 7 15/16 3 15/16 4 5/8
13-197 3 3 7 7/8 3 15/16 3 15/16 5/8
13-198 3 1/2 1 1/4 6 7/8 3 3/4 3 1/8 5/8 & 1/2
13-199 3 1/2 1 1/2 6 13/16 3 3/4 3 1/16 5/8 & 1/2
13-200 3 1/2 2 6 7/8 3 3/4 3 1/8 5/8 & 1/2
13-201 3 1/2 2 1/2 7 3/4 3 3/4 4 5/8
13-202 3 1/2 3 7 11/16 3 3/4 3 15/16 5/8
13-203 3 1/2 3 /12 7 1/2 3 3/4 3 3/4 5/8
P
U
SECTION ALUMINUM COUPLER-REDUCERS,
13-1A PIPE TO PIPE, continued


 IPS MAIN IPS TAP
NUMBER A B C K
 13-204 4 1 1/2 7 11/16 4 5/8 3 1/16 5/8 & 1/2
13-205 4 2 7 3/4 4 5/8 3 1/8 5/8 & 1/2
13-206 4 2 1/2 8 5/8 4 5/8 4 5/8
13-207 4 3 8 9/16 4 5/8 3 15/16 5/8
13-208 4 3 1/2 8 3/8 4 5/8 3 3/4 5/8
13-209 4 4 9 1/4 4 5/8 4 5/8 5/8
13-210 4 1/2 1 1/2 7 13/16 4 3/4 3 1/16 5/8 & 1/2
13-211 4 1/2 2 7 7/8 4 3/4 3 1/8 5/8 & 1/2
Cast of a lightweight aluminum 13-212 4 1/2 2 1/2 8 3/4 4 3/4 4 5/8
alloy, type ARPP couples 13-213 4 1/2 3 8 11/16 4 3/4 3 15/16 5/8
pipes of the same or different 13-214 4 1/2 3 1/2 8 1/2 4 3/4 3 3/4 5/8
sizes end on end. 13-215 4 1/2 4 9 3/8 4 3/4 4 5/8 5/8
13-216 4 1/2 4 1/2 9 1/2 4 3/4 4 3/4 5/8
Bolts, nuts, and lockwashers 13-217 5 2 8 3/16 5 1/16 3 1/8 5/8 & 1/2
made of high tensile alumi- 13-218 5 2 1/2 9 1/16 5 1/16 4 5/8
num provide clamping 13-219 5 3 9 5 1/16 3 15/16 5/8
efficiency and resistance 13-220 5 3 1/2 8 13/16 5 1/16 3 3/4 5/8
to corrosion. 13-221 5 4 9 11/16 5 1/16 4 5/8 5/8
13-222 5 4 1/2 9 13/16 5 1/16 4 3/4 5/8
All bolt heads are captivated 13-223 5 5 10 1/8 5 1/16 5 1/16 5/8
for single-wrench installation. 13-224 6 2 1/2 10 6 4 5/8
13-225 6 3 9 15/16 6 3 15/16 5/8
13-226 6 3 1/2 9 3/4 6 3 3/4 5/8
13-227 6 4 10 5/8 6 4 5/8 5/8
13-228 6 4 1/2 10 3/4 6 4 3/4 5/8
13-229 6 5 11 1/16 6 5 1/16 5/8
13-230 6 6 12 6 6 5/8
P
U
BRONZE COUPLER-REDUCERS, SECTION
PIPE TO CABLE 13-2

CATALOG IPS
NUMBER MAIN AWG MCM
A B C K
MIN MAX

13-231* 1/2 8 600 6 1/8 3 3 1/8 3/8
13-232* 3/4 8 600 5 7/8 2 3/4 3 1/8 1/2 & 3/8  
13-235* 1 8 600 6 5/16 3 3/16 3 1/8 1/2 & 3/8
13-236* 1 4/0 1000 6 15/16 3 3/16 3 3/4 1/2
13-238* 1 1/4 8 600 6 1/4 3 1/8 3 1/8 1/2 & 3/8
13-239* 1 1/4 4/0 1000 6 7/8 3 1/8 3 3/4 1/2
13-241* 1 1/2 8 600 6 3/16 3 1/16 3 1/8 1/2 & 3/8
13-242* 1 1/2 4/0 1000 6 13/16 3 1/16 3 3/4 1/2
13-243 1 1/2 1000 1500 7 5/16 3 1/16 4 1/4 1/2
13-244* 2 8 600 6 1/4 3 1/8 3 1/8 1/2 & 3/8
13-245* 2 4/0 1000 6 7/8 3 1/8 3 3/4 1/2 
13-246 2 1000 1500 7 3/8 3 1/8 4 1/4 1/2
13-247 2 1500 2000 8 1/4 3 1/8 5 1/8 1/2
13-248* 2 1/2 8 600 7 1/8 4 3 1/8 5/8 & 3/8
13-249* 2 1/2 4/0 1000 7 3/4 4 3 3/4 5/8 & 1/2
13-250 2 1/2 1000 1500 8 1/4 4 4 1/4 5/8 & 1/2
13-251 2 1/2 1500 2000 9 1/8 4 5 1/8 5/8 & 1/2
Made of a copper alloy
13-252* 3 8 600 7 1/16 3 15/16 3 1/8 5/8 & 3/8 for high conductivity and
13-253* 3 4/0 1000 7 11/16 3 15/16 3 3/4 5/8 & 1/2 natural resistance to
13-254 3 1000 1500 8 3/16 3 15/16 4 1/4 5/8 & 1/2 corrosion and stress, the
13-255 3 1500 2000 9 1/16 3 15/16 5 1/8 5/8 & 1/2 heavy duty type BRPC
13-256* 3 1/2 8 600 6 7/8 3 3/4 3 1/8 5/8 & 3/8 connector intended to link
13-257* 3 1/2 4/0 1000 7 1/2 3 3/4 3 3/4 5/8 & 1/2 a cable to a pipe bus offers
13-258 3 1/2 1000 1500 8 3 3/4 4 1/4 5/8 & 1/2
13-259 3 1/2 1500 2000 8 7/8 3 3/4 5 1/8 5/8 & 1/2
rugged dependability in
13-260* 4 8 600 7 3/4 4 5/8 3 1/8 5/8 & 3/8 the field.
13-261* 4 4/0 1000 8 3/8 4 5/8 3 3/4 5/8 & 1/2 To enhance clamping
13-262 4 1000 1500 8 7/8 4 5/8 4 1/8 5/8 & 1/2
efficiency and further reduce
13-263 4 1500 2000 9 3/4 4 5/8 5 1/8 5/8 & 1/2
13-264* 4 1/2 8 600 7 7/8 4 3/4 3 1/8 5/8 & 3/8
the effects of corrosion,
13-265* 4 1/2 4/0 1000 8 1/2 4 3/4 3 3/4 5/8 & 1/2 bolts, nuts, and lockwash-
13-266 4 1/2 1000 1500 9 4 3/4 4 1/4 5/8 & 1/2 ers are high strength
13-267 4 1/2 1500 2000 9 7/8 4 3/4 5 1/8 5/8 & 1/2 silicon bronze.
13-268* 5 8 600 8 3/16 5 1/16 3 1/8 5/8 & 3/8
13-269* 5 4/0 1000 8 13/16 5 1/16 3 3/4 5/8 & 1/2
Recessed bolt heads allow
13-270 5 1000 1500 9 5/16 5 1/16 4 1/4 5/8 & 1/2 single-wrench installation.
13-271 5 1500 2000 10 3/16 5 1/16 5 1/8 5/8 & 1/2
13-272 6 8 600 9 1/8 6 3 1/8 5/8 & 3/8
13-273* 6 4/0 1000 9 3/4 6 3 3/4 5/8 & 1/2
13-274 6 1000 1500 10 1/4 6 4 1/4 5/8 & 1/2
13-275 6 1500 2000 11 1/8 6 5 1/8 5/8 & 1/2
P
U
SECTION ALUMINUM COUPLER-REDUCERS,
13-2A PIPE TO CABLE
ALUMINUM ACSR
 DIMENSIONS IN INCHES
  NUMBER MAIN AWG MCM AWG MCM
A B C K
MIN MAX MIN MAX
13-276 1/2 4 954 4 795 8 4 4 1/2
13-280* 3/4 4 954 4 795 6 3/4 2 3/4 4 1/2
13-284* 1 4 954 4 795 7 3/16 3 3/16 4 1/2
13-288* 1 1/4 4 954 4 795 7 1/8 3 1/8 4 1/2
13-292* 1 1/2 4 954 4 795 7 1/16 3 1/16 4 1/2
 13-293 1 1/2 900 1272 715.5 1113 6 11/16 3 1/16 3 5/8 1/2
13-296* 2 4 954 4 795 7 1/8 3 1/8 4 1/2
13-297 2 900 1272 715.5 1113 6 3/4 3 1/8 3 5/8 1/2
The lightweight
13-300* 2 1/2 4 954 4 795 8 4 4 5/8 & 1/2
aluminum type ARPC
13-301 2 1/2 900 1272 715.5 1113 7 5/8 4 3 5/8 5/8 & 1/2
which efficiently joins
13-302 2 1/2 1272 1590 1113 1272 8 1/4 4 4 1/4 5/8 & 1/2
a cable to a pipe bus
13-305* 3 4 954 4 795 7 15/16 3 15/16 4 5/8 & 1/2
features high strength
13-306 3 900 1272 715.5 1113 7 9/16 3 15/16 3 5/8 5/8 & 1/2
aluminum clamping
13-307 3 1272 1590 1113 1272 8 3/16 3 15/16 4 1/4 5/8 & 1/2
hardware.
13-310* 3 1/2 4 954 4 795 7 3/4 3 3/4 4 5/8 & 1/2
A heavy duty connector, 13-311 3 1/2 900 1272 715.5 1113 7 3/8 3 3/4 3 5/8 5/8 & 1/2
reliable and durable 13-312 3 1/2 1272 1590 1113 1272 8 3 3/4 4 1/4 5/8 & 1/2
under conditions of 13-314* 4 4 954 4 795 8 4 5/8 4 5/8 & 1/2
electrical and environ- 13-315 4 900 1272 715.5 1113 8 1/4 4 5/8 3 5/8 5/8 & 1/2
mental stress, it offers 13-316 4 1272 1590 1113 1272 8 1/4 4 5/8 4 1/4 5/8 & 1/2
the added convenience 13-317 4 1590 2000 1272 1590 8 1/2 4 5/8 4 1/2 5/8
of recessed bolt heads 13-319* 4 1/2 4 954 4 795 8 3/4 4 3/4 4 5/8 & 1/2
to facilitate single- 13-320 4 1/2 900 1272 715.5 1113 8 3/8 4 3/4 3 5/8 5/8 & 1/2
wrench installation. 13-321 4 1/2 1272 1590 1113 1272 9 4 3/4 4 1/4 5/8 & 1/2
13-322 4 1/2 1590 2000 1272 1590 9 1/4 4 3/4 4 1/2 5/8
13-324* 5 4 954 4 795 9 1/16 5 1/16 4 5/8 & 1/2
13-325 5 900 1272 715.5 1113 8 11/16 5 1/16 3 5/8 5/8 & 1/2
13-326 5 1272 1590 1113 1272 9 5/16 5 1/16 4 1/4 5/8 & 1/2
13-327 5 1590 2000 1272 1590 9 9/16 5 1/16 4 1/2 5/8
13-329 6 4 954 4 795 10 6 4 5/8 & 1/2
13-330 6 900 1272 715.5 1113 9 5/8 6 3 5/8 5/8 & 1/2
13-331 6 1272 1590 1113 1272 10 1/4 6 4 1/4 5/8 & 1/2
Wide Range denoted by: * 13-332 6 1590 2000 1272 1590 10 1/2 6 4 1/2 5/8
P
U
BRONZE COUPLER PIPE RUN SECTION
TO PIPE TAP, ELBOW 13-3
Style for 2 1/2” IPS and below Style for 3” IPS and up
CATALOG IPS IPS DIMENSIONS IN INCHES 
NUMBER MAIN TAP

A B C K
13-333-(*) 1/2 1/2 3 3 2 3/8 3/8
13-335-(*) 3/4 3/4 2 3/4 2 3/4 3 1/2 1/2 

13-338-(*) 1 1 3 3/16 3 3/16 3 7/8 1/2
13-342-(*) 1 1/4 1 1/4 3 1/8 3 1/8 4 3/8 1/2 
13-347-(*) 1 1/2 1 1/2 3 1/16 3 1/16 4 3/8 1/2

A rugged connector for linking
13-352-(*) 2 2 3 1/8 3 1/8 5 1/8 1/2 pipes of the same size at an
13-358-(*) 2 1/2 2 1/2 4 4 6 1/8 5/8 angle, the type BEPP depends
on its high conductivity copper
13-364-(*) 3 3 3 15/16 3 15/16 7 5/8 alloy for natural resistance to
13-370-(*) 3 1/2 3 1/2 3 3/4 3 3/4 7 1/2 5/8 corrosion and stress in the field.
13-376-(*) 4 4 4 5/8 4 5/8 8 1/2 5/8 To further enhance its clamping

strength, all bolts, nuts, and
13-383-(*) 4 1/2 4 1/2 4 3/4 4 3/4 8 1/2 5/8 lock-washers are silicon bronze.
13-390-(*) 5 5 5 1/16 5 1/16 9 1/2 5/8 The recessed bolt heads facili-
13-397-(*) 6 6 6 6 11 5/8
tate single-wrench installation.
On all part numbers please specify the angle needed by adding

the angle at the end of the part number (*).
Example: For a 45° 13-397-* please write part number as 13-397-45.
P
U
SECTION ALUMINUM COUPLER PIPE
13-3A RUN TO PIPE TAP, ELBOW

Style for 2 1/2” IPS and below Style for 3” IPS and up

IPS TAP
NUMBER MAIN
A B C K
Made of a lightweight
13-398-(*) 1/2 1/2 4 4 2 3/8 1/2
aluminum aloy, the type
AEPP offers strength and 13-400-(*) 3/4 3/4 2 3/4 2 3/4 3 1/2 1/2
durability in situations
13-403-(*) 1 1 3 3/16 3 3/16 3 7/8 1/2
requiring the connection
of pipes of the same size 13-407-(*) 1 1/4 1 1/4 3 1/8 3 1/8 4 3/8 1/2
at an angle.
13-412-(*) 1 1/2 1 1/2 3 1/16 3 1/16 4 3/8 1/2
The high tensile aluminum
clamping hardware effec- 13-417-(*) 2 2 3 1/8 3 1/8 5 1/8 1/2
tively resists corrosion and 13-423-(*) 2 1/2 2 1/2 4 4 6 1/8 5/8
enhances the strength of
the connector. 13-429-(*) 3 3 3 15/16 3 15/16 7 5/8
In addition, all bolt heads 13-435-(*) 3 1/2 3 1/2 3 3/4 3 3/4 7 1/2 5/8
are captivated to permit 13-441-(*) 4 4 4 5/8 4 5/8 8 1/2 5/8
13-448-(*) 4 1/2 4 1/2 4 3/4 4 3/4 8 1/2 5/8
13-455-(*) 5 5 5 1/16 5 1/16 9 1/2 5/8
13-462-(*) 6 6 6 6 11 5/8
On all part numbers please specify the angle needed by adding the
angle at the end of the part number (*).
Example: For a 45° 13-398-* please write part number as 13-398-45.
P
U
BRONZE VARIABLE ANGLE SECTION
COUPLER PIPE RUN TO PIPE TAP 13-3-VA
0.0°-60.0
B
*Field drill required for 2 1/2”
IPS and below
CATALOG IPS DIMENSIONS IN INCHES A rugged connector for linking

IPS TAP pipes of the same size, the
NUMBER MAIN
A B C K type BEPP depends on its
13-347-VA* 1 1/2 1 1/2 3 1/16 4 3/8 6 1/8 1/2 high conductivity copper alloy
for natural resistance to
13-352-VA* 2 2 3 1/8 5 1/8 6 1/8 1/2 corrosion and stress in field.
13-358-VA* 2 1/2 2 1/2 4 6 1/8 7 5/8 The variable angle elbow
13-364-VA 3 3 3 15/16 7 7 5/8 application pertains to elbow
linkages requiring non-stan-
13-370-VA 3 1/2 3 1/2 3 3/4 7 1/2 9 5/8 dard angle connections
13-376-VA 4 4 4 5/8 8 1/2 9 1/8 5/8 ranging from 0°-60°.
13-383-VA 4 1/2 4 1/2 4 3/4 9 1/8 9 3/4 5/8 To further enhance its clamping
strength, all bolts, nuts,and
13-390-VA 5 5 5 1/16 9 5/8 10 5/8 lockwashers are silicon bronze.
13-397-VA 6 6 6 11 11 7/8 5/8
VA= Variable Angle
P
U
SECTION ALUMINUM VARIABLE ANGLE
13-3A-VA COUPLER PIPE RUN TO PIPE TAP
0.0°-60.0
Made of a lightweight aluminum alloy, the type

AEPP offers strength and durability in situations B
requiring the connection of pipes of same size.
The variable angle elbow application pertains to

elbow linkages requiring non-standard angle con-
nections ranging from 0°-60°.
The high tensile aluminum clamping hardware

effectively resists corrosion and enhances the
strength of the connector.
*Field drill required for 2 1/2”

IPS and below
CATALOG
IPS MAIN IPS TAP
NUMBER
A B C K
13-412-VA* 1 1/2 1 1/2 3 1/16 4 3/8 6 1/8 1/2

13-417-VA* 2 2 3 1/8 5 1/8 6 1/8 1/2
13-423-VA* 2 1/2 2 1/2 4 6 1/8 7 5/8
13-429-VA 3 3 3 15/16 7 7 5/8
13-435-VA 3 1/2 3 1/2 3 3/4 7 1/2 6 3/4 5/8
13-441-VA 4 4 4 5/8 8 1/2 9 1/8 5/8
13-448-VA 4 1/2 4 1/2 4 3/4 9 1/8 9 3/4 5/8
13-455-VA 5 5 5 1/16 9 5/8 10 5/8
13-462-VA 6 6 6 11 11 7/8 5/8
VA= Variable Angle
P
U
BRONZE COUPLER, SECTION
CABLE RUN TO CABLE TAP 13-4
Cast of copper alloy for high conductivity

and natural resistance to corrosion and
stress, the type BCC-couplers includes
bolts, nuts, and lock washers made of
silicon bronze for clamping strength
and durability.
Also, to facilitate single-wrench installation,
all bolts heads are captivated.
CATALOG CABLE RANGE DIMENSIONS IN INCHES

NUMBER
MIN MAX A B C D K
13-500* 8 600 3 1/8 3 1/8 2 1/4 6 1/4 3/8
13-505* 4/0 1000 3 3/4 3 3/4 3 7 1/2 1/2
13-510 1000 1500 4 1/4 4 1/4 3 3/8 8 1/2 1/2
13-515 1500 2000 5 1/8 5 1/8 3 3/4 10 1/4 1/2
P
U
SECTION ALUMINUM COUPLER,
13-4A CABLE RUN TO CABLE TAP
Cast of a lightweight aluminum

alloy, the type ACC couplers
include clamping hardware
made of high tensile aluminum.
All bolt heads are captivated
to facilitate single-wrench
installation.
CATALOG CABLE RANGE DIMENSIONS IN INCHES

NUMBER
AAC ACSR A B C D K
13-520 4-954 4-795 4 4 2 7/8 8 1/2
13-525 900-1272 715.5-1113 3 5/8 3 5/8 3 1/2 7 1/4 1/2
13-530 1272-1590 1113-1272 4 1/4 4 1/4 3 3/8 8 1/2 1/2
13-535 1590-2000 1272-1590 4 1/2 1/2 3 3/4 9 5/8
P
U
BRONZE STUD CONNECTORS, SECTION
STUD TO PIPE 14-1

CATALOG STUD PIPE DIMENSIONS IN INCHES
NUMBER SIZE SIZE IPS
A B C K

14-101 1/2-13 1/2 5 2 3 3/8
14-102 1/2-13 3/4 4 3/4 2 2 3/4 1/2 & 3/8 
14-103 1/2-13 1 5 3/16 2 3 3/16 1/2 & 3/8
14-104 3/4-16 1/2 5 2 3 3/8 
14-105 3/4-16 3/4 4 3/4 2 2 3/4 1/2 & 3/8
14-106 3/4-16 1 5 3/16 2 3 3/16 1/2 & 3/8
14-107 1-14 1/2 5 1/4 2 1/4 3 1/2 & 3/8
14-108 1-14 3/4 4 3/4 2 1/4 2 3/4 1/2
14-109 1-14 1 5 7/16 2 1/4 3 3/16 1/2
14-110 1-14 1 1/4 5 3/8 2 1/4 3 1/8 1/2
14-111 1 1/8-12 1/2 5 1/4 2 1/4 3 1/2 & 3/8
14-112 1 1/8-12 3/4 5 2 1/4 2 3/4 1/2
14-113 1 1/8-12 1 5 7/16 2 1/4 3 3/16 1/2
14-114 1 1/8-12 1 1/4 5 3/8 2 1/4 3 1/8 1/2
14-115 1 1/4-12 1/2 5 1/2 2 1/2 3 1/2 & 3/8
14-116 1 1/4-12 3/4 5 1/4 2 1/2 2 3/4 1/2
14-117 1 1/4-12 1 5 11/16 2 1/2 3 3/16 1/2
14-118 1 1/4-12 1 1/4 5 5/8 2 1/2 3 1/8 1/2 90 DEGREE
(USE SUFFIX -90)
14-119 1 1/4-12 1 1/2 5 9/16 2 1/2 3 1/16 1/2
14-120 1 1/2-12 1/2 5 1/2 2 1/2 3 1/2 & 3/8
Cast of high conductivity copper
14-121 1 1/2-12 3/4 5 1/4 2 1/2 2 3/4 1/2
14-122 1 1/2-12 1 5 11/16 2 1/2 3 3/16 1/2
alloy, the type BSP efficiently
14-123 1 1/2-12 1 1/4 5 5/8 2 1/2 3 1/8 1/2
connects a threaded stud to a
14-124 1 1/2-12 1 1/2 5 9/16 2 1/2 3 1/16 1/2 pipe bus. Bolts, nuts, and
14-125 1 1/2-12 2 5 5/8 2 1/2 3 1/8 1/2 lockwashers are high strength
14-126 1 3/4-12 3/4 5 1/4 2 1/2 2 3/4 1/2 silicon bronze.
14-127 1 3/4-12 1 5 11/16 2 1/2 3 3/16 1/2 For unthreaded studs or stud
14-128 1 3/4-12 1 1/4 5 5/8 2 1/2 3 1/8 1/2 sizes not listed, please specify
14-129 1 3/4-12 1 1/2 5 9/16 2 1/2 3 1/16 1/2 with the order. Pipes at 90° to
14-130 1 3/4-12 2 5 5/8 2 1/2 3 1/8 1/2
the stud will also be readily
14-131 2-12 1 5 11/16 2 1/2 3 3/16 5/8
provided so long as the suffix
14-132 2-12 1 1/4 5 5/8 2 1/2 3 1/8 5/8
“-90” is added to the catalog
14-133 2-12 1 1/2 5 9/16 2 1/2 3 1/16 5/8
number.
14-134 2-12 2 5 5/8 2 1/2 3 1/8 5/8
14-135 2-12 2 1/2 6 1/2 2 1/2 4 5/8

P
U
SECTION BRONZE STUD CONNECTORS,
14-1 STUD TO PIPE
 CATALOG STUD PIPE DIMENSIONS IN INCHES

A B C K
14-136 2 1/4-12 1 1/4 5 5/8 2 1/2 3 1/8 5/8 & 1/2

14-137 2 1/4-12 1 1/2 5 9/16 2 1/2 3 1/16 5/8 & 1/2
 14-138 2 1/4-12 2 5 5/8 2 1/2 3 1/8 5/8 & 1/2
14-139 2 1/4-12 2 1/2 6 1/2 2 1/2 4 5/8 & 1/2
 14-140 2 1/2-12 1 1/2 5 9/16 2 1/2 3 1/16 5/8 & 1/2
14-141 2 1/2-12 2 5 5/8 2 1/2 3 1/8 5/8 & 1/2
14-142 2 1/2-12 2 1/2 6 1/2 2 1/2 4 5/8 & 1/2
14-143 2 1/2-12 3 6 7/16 2 1/2 3 15/16 5/8 & 1/2
14-144 2 3/4-12 1 1/2 6 5/16 3 1/4 3 1/16 5/8
14-145 2 3/4-12 2 6 3/8 3 1/4 3 1/8 5/8
14-146 2 3/4-12 2 1/2 7 1/4 3 1/4 4 5/8
14-147 2 3/4-12 3 7 3/16 3 1/4 3 15/16 5/8
14-148 2 3/4-12 3 1/2 7 3 1/4 3 3/4 5/8
14-149 3-12 2 6 3/8 3 1/4 3 1/8 5/8 & 1/2
14-150 3-12 2 1/2 7 1/4 3 1/4 4 5/8
14-151 3-12 3 7 3/16 3 1/4 3 15/16 5/8
14-152 3-12 3 1/2 7 3 1/4 3 3/4 5/8
90 DEGREE
14-153 3-12 4 7 7/8 3 1/4 4 5/8 5/8
(USE SUFFIX -90)
14-154 3 1/4-12 2 1/2 7 1/4 3 1/4 4 5/8
14-155 3 1/4-12 3 7 3/16 3 1/4 3 15/16 5/8
For unthreaded studs 14-156 3 1/4-12 3 1/2 7 3 1/4 3 3/4 5/8
or stud sizes not listed, 14-157 3 1/4-12 4 7 7/8 3 1/4 4 5/8 5/8
please specify with the 14-158 3 1/2-12 2 1/2 7 1/2 3 1/2 4 5/8
order. Pipes at 90° to the 14-159 3 1/2-12 3 7 7/16 3 1/2 3 15/16 5/8
stud will also be readily 14-160 3 1/2-12 3 1/2 7 1/4 3 1/2 3 3/4 5/8
provided so long as the 14-161 3 1/2-12 4 8 1/8 3 1/2 4 5/8 5/8
suffix “-90” is added to 14-162 4-12 2 1/2 7 1/2 3 1/2 4 5/8
the catalog number. 14-163 4-12 3 7 7/16 3 1/2 3 15/16 5/8
14-164 4-12 3 1/2 7 1/4 3 1/2 3 3/4 5/8
14-165 4-12 4 8 1/8 3 1/2 4 5/8 5/8
P
U
ALUMINUM STUD CONNECTORS, SECTION
STUD TO PIPE 14-1A
CATALOG STUD PIPE DIMENSIONS IN INCHES

NUMBER SIZE SIZE IPS A B C K
14-166 1/2-13 1/2 7 1/8 3 1/8 4 1/2
14-167 1/2-13 3/4 5 7/8 3 1/8 2 3/4 1/2
14-168 1/2-13 1 6 5/16 3 1/8 3 3/16 1/2
14-169 3/4-16 1/2 7 1/8 3 1/8 4 1/2
14-170 3/4-16 3/4 5 7/8 3 1/8 2 3/4 1/2
14-171 3/4-16 1 6 5/16 3 1/8 3 3/16 1/2
14-172 1-14 1/2 7 1/8 3 1/8 4 1/2
14-173 1-14 3/4 5 7/8 3 1/8 2 3/4 1/2
14-174 1-14 1 6 5/16 3 1/8 3 3/16 1/2
14-175 1-14 1 1/4 6 1/4 3 1/8 3 1/8 1/2
14-176 1 1/8-12 1/2 7 1/8 3 1/8 4 1/2
14-177 1 1/8-12 3/4 5 7/8 3 1/8 2 3/4 1/2
14-178 1 1/8-12 1 6 5/16 3 1/8 3 3/16 1/2
14-179 1 1/8-12 1 1/4 6 1/4 3 1/8 3 1/8 1/2
14-180 1 1/4-12 1/2 7 1/8 3 1/8 4 1/2 90 DEGREE
(USE SUFFIX -90)
14-181 1 1/4-12 3/4 5 7/8 3 1/8 2 3/4 1/2
14-182 1 1/4-12 1 6 5/16 3 1/8 3 3/16 1/2
14-183 1 1/4-12 1 1/4 6 1/4 3 1/8 3 1/8 1/2 Cast of a lightweight aluminum
14-184 1 1/4-12 1 1/2 6 3/16 3 1/8 3 1/16 1/2 alloy, the type AT connects a
14-185 1 1/2-12 1/2 7 1/8 3 1/8 4 1/2 threaded stud to a pipe bus.
14-186 1 1/2-12 3/4 5 7/8 3 1/8 2 3/4 1/2 Bolts, nuts, and lockwashers
14-187 1 1/2-12 1 6 5/16 3 1/8 3 3/16 1/2 are high tensile aluminum for
14-188 1 1/2-12 1 1/4 6 1/4 3 1/8 3 1/8 1/2 durability and clamping efficiency.
14-189 1 1/2-12 1 1/2 6 3/16 3 1/8 3 1/16 1/2 Requests for unthreaded studs
14-190 1 1/2-12 2 6 1/4 3 1/8 3 1/8 1/2 or stud sizes not listed must be
14-191 1 3/4-12 3/4 6 1/4 3 1/2 2 3/4 1/2 specified on the order. Tubes
14-192 1 3/4-12 1 6 11/16 3 1/2 3 3/16 1/2 at 90° to the stud will also be
14-193 1 3/4-12 1 1/4 6 5/8 3 1/2 3 1/8 1/2 readily provided so long as the
14-194 1 3/4-12 1 1/2 6 9/16 3 1/2 3 1/16 1/2 suffix “-90” appears at the end
14-195 1 3/4-12 2 6 5/8 3 1/2 3 1/8 1/2 of the catalog number.
P
U
SECTION ALUMINUM STUD CONNECTORS
14-1A STUD TO PIPE, continued

CATALOG STUD
SIZE
NUMBER SIZE A B C K
IPS
14-196 2-12 1 6 11/16 3 1/2 3 3/16 1/2
14-197 2-12 1 1/4 6 5/8 3 1/2 3 1/8 1/2
14-198 2-12 1 1/2 6 9/16 3 1/2 3 1/16 1/2
14-199 2-12 2 6 5/8 3 1/2 3 1/8 1/2
14-200 2-12 2 1/2 7 1/2 3 1/2 4 5/8 & 1/2
14-201 2 1/4-12 1 1/4 6 5/8 3 1/2 3 1/8 1/2
14-202 2 1/4-12 1 1/2 6 9/16 3 1/2 3 1/16 1/2
14-203 2 1/4-12 2 6 5/8 3 1/2 3 1/8 1/2
14-204 2 1/4-12 2 1/2 7 3/8 3 1/2 3 7/8 5/8 & 1/2
14-205 2 1/2-12 1 1/2 6 9/16 3 1/2 3 1/16 1/2
14-206 2 1/2-12 2 6 5/8 3 1/2 3 1/8 1/2
14-207 2 1/2-12 2 1/2 7 1/2 3 1/2 4 5/8 & 1/2
14-208 2 1/2-12 3 7 7/16 3 1/2 3 15/16 5/8 & 1/2
90 DEGREE 14-209 2 3/4-12 1 1/2 7 1/16 4 3 1/16 5/8 & 1/2
(USE SUFFIX -90)
14-210 2 3/4-12 2 7 1/8 4 3 1/8 5/8 & 1/2
14-211 2 3/4-12 2 1/2 8 4 4 5/8
Requests for unthreaded studs 14-212 2 3/4-12 3 7 15/16 4 3 15/16 5/8
or stud sizes not listed must 14-213 2 3/4-12 3 1/2 7 3/4 4 3 3/4 5/8
be specified on the order. 14-214 3-12 2 7 1/8 4 3 1/8 5/8 & 1/2
Pipes at 90° to the stud will also 14-215 3-12 2 1/2 8 4 4 5/8
be readily provided so long as 14-216 3-12 3 7 15/16 4 3 15/16 5/8
the suffix “-90” appears at the 14-217 3-12 3 1/2 7 3/4 4 3 3/4 5/8
end of the catalog number. 14-218 3-12 4 8 5/8 4 4 5/8 5/8
14-219 3 1/4-12 2 1/2 8 4 4 5/8
14-220 3 1/4-12 3 7 15/16 4 3 15/16 5/8
14-221 3 1/4-12 3 1/2 7 3/4 4 3 3/4 5/8
14-222 3 1/4-12 4 8 5/8 4 4 5/8 5/8
14-223 3 1/2-12 2 1/2 8 1/4 4 1/4 4 5/8
14-224 3 1/2-12 3 8 3/16 4 1/4 3 15/16 5/8
14-225 3 1/2-12 3 1/2 8 4 1/4 3 3/4 5/8
14-226 3 1/2-12 4 8 3/4 4 1/4 4 5/8 5/8
14-227 4-12 2 1/2 8 1/4 4 1/4 4 5/8
14-228 4-12 3 8 3/16 4 1/4 3 15/16 5/8
14-229 4-12 3 1/2 8 4 1/4 3 3/4 5/8
14-230 4-12 4 8 3/4 4 1/4 4 5/8 5/8
P
U
BRONZE STUD CONNECTORS SECTION
STUD TO CABLE 14-2
CATALOG STUD AWG MCM DIMENSIONS IN INCHES

NUMBER SIZE MIN MAX
A B C K
14-231* 1/2-13 8 600 5 1/8 2 3 1/8 3/8
14-232* 5/8-11 8 600 5 1/8 2 3 1/8 3/8
14-233* 3/4-16 8 600 5 1/8 2 3 1/8 3/8
14-235* 1-14 8 600 5 3/8 2 1/4 3 1/8 1/2 & 3/8
14-236* 1-14 4/0 1000 6 2 1/4 3 3/4 1/2 A strong and dependable connector for
14-238* 1 1/8-12 8 600 5 3/8 2 1/4 3 1/8 1/2 & 3/8 joining a threaded stud to a cable, the
14-239* 1 1/8-12 4/0 1000 6 2 1/4 3 3/4 1/2 type BSC relies on a high conductivity
14-241* 1 1/4-12 8 600 5 1/2 2 1/2 3 1/8 1/2 & 3/8 copper alloy for its durability.
14-242* 1 1/4-12 4/0 1000 6 1/4 2 1/2 3 3/4 1/2 Clamping hardware is silicon bronze
14-244* 1 1/2-12 8 600 5 5/8 2 1/2 3 1/8 1/2 & 3/8 for resistance to corrosion.
14-245* 1 1/2-12 4/0 1000 6 1/4 2 1/2 3 3/4 1/2 For unthreaded studs or stud sizes not
14-246 1 1/2-12 1000 1500 6 3/4 2 1/2 4 1/4 1/2 listed, please specify with the order.
14-244S* 1 3/4-12 8 600 5 5/8 2 1/2 3 1/8 1/2 & 3/8 Cables at 90 degree to the stud will be
14-245S 1 3/4-12 4/0 1000 6 1/4 2 1/2 3 3/4 1/2 readily supplied but the suffix "-90"
14-246S 1 3/4-12 1000 1500 6 3/4 2 1/2 4 1/4 1/2 must appear at the end of the catalog
14-247* 2-12 8 600 5 5/8 2 1/2 3 1/8 5/8 & 3/8 number.
14-248* 2-12 4/0 1000 6 1/4 2 1/2 3 3/4 5/8 & 1/2
14-249 2-12 1000 1500 6 3/4 2 1/2 4 1/4 5/8 & 1/2
14-250 2-12 1500 2000 7 5/8 2 1/2 5 1/8 5/8 & 1/2
14-251* 2 1/4-12 8 600 5 5/8 2 1/2 3 1/8 5/8 & 3/8
14-252* 2 1/4-12 4/0 1000 6 1/4 2 1/2 3 3/4 5/8 & 1/2
14-253 2 1/4-12 1000 1500 6 3/4 2 1/2 4 1/4 5/8 & 1/2
 
14-254 2 1/4-12 1500 2000 7 5/8 2 1/2 5 1/8 5/8 & 1/2 
14-255* 2 1/2-12 8 600 5 5/8 2 1/2 3 1/8 5/8 & 3/8
14-256* 2 1/2-12 4/0 1000 6 1/4 2 1/2 3 3/4 5/8 & 1/2
14-257 2 1/2-12 1000 1500 6 3/4 2 1/2 4 1/4 5/8 & 1/2
14-258 2 1/2-12 1500 2000 7 5/8 2 1/2 5 1/8 5/8 & 1/2

14-259* 2 3/4-12 8 600 6 3/8 3 1/4 3 1/8 5/8 & 3/8
14-260* 2 3/4-12 4/0 1000 7 3 1/4 3 3/4 5/8 & 1/2
14-261 2 3/4-12 1000 1500 7 1/2 3 1/4 4 1/4 5/8 & 1/2
14-262 2 3/4-12 1500 2000 8 3/8 3 1/4 5 1/8 5/8 & 1/2
14-263* 3-12 8 600 6 3/8 3 1/4 3 5/8 & 3/8
14-264* 3-12 4/0 1000 7 3 1/4 3 3/4 5/8 & 1/2
14-265 3-12 1000 1500 7 1/2 3 1/4 4 1/4 5/8 & 1/2
14-266 3-12 1500 2000 8 3/8 3 1/4 5 1/8 5/8 & 1/2
14-267* 3 1/4-12 4/0 1000 7 3 1/4 3 3/4 5/8 & 1/2
14-268 3 1/4-12 1000 1500 7 1/2 3 1/4 4 1/4 5/8 & 1/2
14-269 3 1/4-12 1500 2000 8 3/8 3 1/4 5 1/8 5/8 & 1/2
14-270* 3 1/2-12 4/0 1000 7 1/4 3 1/2 3 3/4 5/8 & 1/2
90 DEGREE
14-271 3 1/2-12 1000 1500 7 3/4 3 1/2 4 1/4 5/8 & 1/2 (USE SUFFIX -90)
14-272 3 1/2-12 1500 2000 8 5/8 3 1/2 5 1/8 5/8 & 1/2
14-273* 4-12 4/0 1000 7 1/4 3 1/2 3 3/4 5/8 & 1/2
14-274 4-12 1000 1500 7 3/4 3 1/2 4 1/4 5/8 & 1/2
14-275 4-12 1500 2000 8 5/8 3 1/2 5 1/8 5/8 & 1/2
P
U
SECTION ALUMINUM STUD CONNECTORS,
14-2A STUD TO CABLE
ALUMINUM ACSR
CATALOG STUD DIMENSIONS IN INCHES
NUMBER SIZE AWG MCM AWG MCM
MIN. MAX MIN. MAX. A B C K
14-276 1/2-13 4 954 4 795 7 1/8 3 1/8 4 1/2
14-277 3/4-16 4 954 4 795 7 1/8 3 1/8 4 1/2
14-281* 1-14 4 954 4 795 7 1/8 3 1/8 4 1/2
An efficient connector for joining
14-285* 1 1/8-12 4 954 4 795 7 1/8 3 1/8 4 1/2
a threaded stud to a cable, the
type ASC relies on a lightweight 14-289* 1 1/4-12 4 954 4 795 7 1/8 3 1/8 4 1/2
aluminum alloy for its durability. 14-292* 1 1/2-12 4 954 4 795 7 1/8 3 1/8 4 1/2
High tensile aluminum bolts,
14-293 1 1/2-12 900 1272 715.5 1113 6 3/4 3 1/8 3 5/8 1/2
nuts, and lockwashers increase
clamping strength and resist 14-296* 1 3/4-12 4 954 4 795 7 1/2 3 1/2 4 1/2
corrosion. 14-297 1 3/4-12 900 1272 715.5 1113 7 1/8 3 1/2 3 5/8 1/2
Orders for cables at 90° to the 14-299* 2-12 4 954 4 795 7 1/2 3 1/2 4 1/2
stud require the addition of the
14-300 2-12 900 1272 715.5 1113 7 1/8 3 1/2 3 5/8 1/2
suffix “-90” to the catalog number.
14-301 2-12 1272 1590 1113 1272 7 3/4 3 1/2 4 1/4 1/2
Unthreaded studs or stud sizes
not listed must be specified with 14-302* 2 1/4-12 4 954 4 795 7 1/2 3 1/2 4 1/2
the order. 14-303 2 1/4-12 900 1272 715.5 1113 7 1/8 3 1/2 3 5/8 1/2
14-304 2 1/4-12 1272 1590 1113 1272 7 3/4 3 1/2 4 1/4 1/2
14-305* 2 1/2-12 4 954 4 795 7 1/2 3 1/2 4 1/2
14-306 2 1/2-12 900 1272 715.5 1113 7 1/8 3 1/2 3 5/8 1/2
14-307 2 1/2-12 1272 1590 1113 1272 7 3/4 3 1/2 4 1/4 1/2
14-308 2 1/2-12 1590 2000 1272 1590 8 3 1/2 4 1/2 5/8 & 1/2
14-309* 2 3/4-12 4 954 4 795 8 4 4 5/8 & 1/2
14-310 2 3/4-12 900 1272 715.5 1113 7 5/8 4 3 5/8 5/8 & 1/2
14-311 2 3/4-12 1272 1590 1113 1272 8 1/4 4 4 1/4 5/8 & 1/2
14-312 2 3/4-12 1590 2000 1272 1590 8 1/2 4 4 1/2 5/8
14-313* 3-12 4 954 4 795 8 4 4 5/8 & 1/2
14-314 3-12 900 1272 715.5 1113 7 5/8 4 3 5/8 5/8 & 1/2
14-315 3-12 1272 1590 1113 1272 8 1/4 4 4 1/4 5/8 & 1/2
14-316 3-12 1590 2000 1272 1590 8 1/2 4 4 1/2 5/8
14-317 3 1/4-12 900 1272 715.5 1113 7 5/8 4 3 5/8 5/8 & 1/2
14-318 3 1/4-12 1272 1590 1113 1272 8 1/4 4 4 1/4 5/8 & 1/2
14-319 3 1/4-12 1590 2000 1272 1590 8 1/2 4 4 1/2 5/8
14-320 3 1/2-12 900 1272 715.5 1113 7 7/8 4 1/4 3 5/8 5/8 & 1/2
90 DEGREE 14-321 3 1/2-12 1272 1590 1113 1272 8 1/2 4 1/4 4 1/4 5/8 & 1/2
(USE SUFFIX -90)
14-322 3 1/2-12 1590 2000 1272 1590 8 3/4 4 1/4 4 1/2 5/8
14-323 4-12 900 1272 715.5 1113 7 7/8 4 1/4 3 5/8 5/8 & 1/2
14-324 4-12 1272 1590 1113 1272 8 1/2 4 1/4 4 1/4 5/8 & 1/2
14-325 4-12 1590 2000 1272 1590 8 3/4 4 1/4 4 1/2 5/8
P
U
BRONZE STUD CONNECTORS STUD TO SECTION
CABLE (PARALLEL OR PERPENDICULAR) 14-2WRX
CABLE SIZE
NUMBER SIZE AWG MCM
MIN MAX A B C K
14-231-WRX 1/2-13 2 800 5 1/8 2 2 3/8 3/8
14-232-WRX 5/8-11 2 800 5 1/8 2 2 3/8 3/8  
14-233-WRX 3/4-16 2 800 5 1/8 2 2 3/8 3/8


14-235-WRX 1-14 1/0 1250 6 2 1/4 3 1/2
14-238-WRX 1 1/8-12 1/0 1250 6 2 1/4 3 1/2
14-241-WRX 1 1/4-12 1/0 1250 6 2 1/2 3 1/2
14-244-WRX 1 1/2-12 1/0 1250 6 2 1/2 3 1/2
14-245-WRX 1 3/4-12 1/0 1250 6 2 1/2 3 1/2
14-247-WRX 2-12 1/0 1250 6 2 1/2 3 5/8 A strong and dependable
14-251-WRX 2 1/4-12 1/0 1250 6 2 1/2 3 5/8 connector for joining a
threaded stud to a cable,
14-255-WRX 2 1/2-12 1/0 1250 6 2 1/2 3 5/8
the type BSCX relies on a
14-259-WRX 2 3/4-12 1/0 1250 7 1/4 3 1/4 3 5/8 high conductivity copper
14-263-WRX 3-12 1/0 1250 7 1/4 3 1/4 3 5/8 alloy for its durability.
14-267-WRX 3 1/4-12 1/0 1250 7 1/4 3 1/4 3 5/8 Clamping hardware is silicon
14-270-WRX 3 1/2-12 1/0 1250 7 3/4 3 1/2 3 5/8
bronze. For unthreaded studs
or stud sizes not listed, please
14-273-WRX 4 -12 1/0 1250 7 3/4 3 1/2 3 5/8 specify with the order.
P
U
SECTION BRONZE STUD CONNECTORS STUD TO
14-2WRX2 CABLE (PARALLEL OR PERPENDICULAR)

CABLE SIZE
NUMBER SIZE AWG MCM
MIN MAX A B C K
14-235-WRX2 1-14 2/0 1000 4 7/8 2 1/4 2 3/8 1/2

  14-238-WRX2 1 1/8-12 2/0 1000 4 7/8 2 1/4 2 3/8 1/2
14-241-WRX2 1 1/4-12 2/0 1000 5 3/8 2 1/2 2 3/8 1/2
14-244-WRX2 1 1/2-12 2/0 1000 5 3/8 2 1/2 2 3/8 1/2
14-247-WRX2 2-12 2/0 1000 5 3/8 2 1/2 2 3/8 5/8

A strong and dependable
14-251-WRX2 2 1/4-12 2/0 1000 5 3/8 2 1/2 2 3/8 5/8
connector for joining a
threaded stud to a cable, 14-255-WRX2 2 1/2-12 2/0 1000 5 3/8 2 1/2 2 3/8 5/8
the type BSCX relies on a
high conductivity copper 14-259-WRX2 2 3/4-12 2/0 1000 6 3 1/4 2 3/8 5/8
alloy for its durability.
14-263-WRX2 3-12 2/0 1000 6 3 1/4 2 3/8 5/8
Clamping hardware is
silicon bronze for resis- 14-267-WRX2 3 1/4-12 2/0 1000 6 3 1/4 2 3/8 5/8
tance to corrosion.
14-270-WRX2 3 1/2-12 2/0 1000 6 3/8 3 1/2 2 3/8 5/8
For unthreaded studs or
stud sizes not listed, please 14-273-WRX2 4-12 2/0 1000 6 3/8 3 1/2 2 3/8 5/8
specify with the order.
P
U
BRONZE STUD CONNECTORS SECTION
STUD TO PAD 14-3
CATALOG STUD PAD DIMENSIONS IN INCHES
NUMBER SIZE STYLE A B C K
14-326 1/2-13 B 6 2 1/2 3/8
14-327 1/2-13 C 6 2 1/2 3/8
14-328 1/2-13 D 7 2 1/2 3/8
14-329 3/4-16 B 6 2 1/2 3/8
14-330 3/4-16 C 6 2 1/2 3/8
14-331 3/4-16 D 7 2 1/2 3/8 
14-332 1-14 B 6 1/4 2 1/4 5/8 1/2
14-333 1-14 C 6 1/4 2 1/4 5/8 1/2
14-334 1-14 D 7 1/4 2 1/4 3/4 1/2

14-336 1 1/8-12 B 6 1/4 2 1/4 5/8 1/2 
14-337 1 1/8-12 C 6 1/4 2 1/4 5/8 1/2
14-338 1 1/8-12 D 7 1/4 2 1/4 3/4 1/2
14-341 1 1/4-12 B 6 1/2 2 1/2 3/4 1/2 
14-342 1 1/4-12 C 6 1/2 2 1/2 3/4 1/2
14-343 1 1/4-12 D 7 1/2 2 1/2 3/4 1/2
14-346 1 1/2-12 B 6 1/2 2 1/2 1/2 1/2
14-347 1 1/2-12 C 6 1/2 2 1/2 5/8 1/2 The BSTB which joins a
14-348 1 1/2-12 D 7 1/2 2 1/2 3/4 1/2 threaded stud
to a flat bar bus 
14-351 1 3/4-12 B 6 7/8 2 1/2 3/4 1/2 offers strength and durability
14-352 1 3/4-12 C 7 7/8 2 1/2 5/8 1/2 because of its high conductivity
 

14-353 1 3/4-12 D 7 7/8 2 1/2 1 1/2 copper alloy casting and silicon
   



 
14-356 2-12 B 6 7/8 2 1/2 5/8 5/8

  
bronze clamping hardware.


 
   

   
14-357 2-12 C 6 7/8 2 1/2 7/8 5/8


    
14-358 2-12 D 7 7/8 2 1/2 1 5/8 Unthreaded studs or stud sizes

14-362 2 1/4-12 B 6 7/8 2 1/2 5/8 5/8 not listed must be specified with
14-363 2 1/4-12 C 6 7/8 2 1/2 5/8 5/8 the order.
14-364 2 1/4-12 D 7 /8 2 1/2 1 1/8 5/8
14-368 2 1/2-12 B 7 1/8 2 1/2 5/8 5/8
14-369 2 1/2-12 C 7 1/8 2 1/2 5/8 5/8
14-370 2 1/2-12 D 8 1/8 2 1/2 3/4 5/8
14-373 2 3/4-12 B 7 1/8 3 1/4 5/8 5/8
14-374 2 3/4-12 C 7 1/8 3 1/4 5/8 5/8
14-375 2 3/4-12 D 8 1/8 3 1/4 3/4 5/8
14-378 3-12 B 7 3/8 3 1/4 3/4 5/8 90 DEGREE
14-379 3-12 C 7 3/8 3 1/4 3/4 5/8 (USE SUFFIX -90)
14-380 3-12 D 8 3/8 3 1/4 1 1/8 5/8
14-384 3 1/4-12 B 7 5/8 3 1/4 3/4 5/8
14-385 3 1/4-12 C 7 5/8 3 1/4 3/4 5/8
14-386 3 1/4-12 D 8 5/8 3 1/4 1 5/8
14-390 3 1/2-12 B 7 5/8 3 1/2 3/4 5/8
14-391 3 1/2-12 C 7 5/8 3 1/2 3/4 5/8
14-392 3 1/2-12 D 8 5/8 3 1/2 1 5/8
TRANSVERSE 90 DEGREE
14-396 4-12 B 7 7/8 3 1/2 1 1/8 5/8
(USE SUFFIX -V-90)
14-397 4-12 C 7 7/8 3 1/2 1 1/8 5/8
EX: 14-348V-90
14-398 4-12 D 8 7/8 3 1/2 1 1/8 5/8
P
U
SECTION ALUMINUM STUD CONNECTORS,
14-3A STUD TO BAR
CATALOG STUD PAD DIMENSIONS IN INCHES
NUMBER SIZE STYLE A B C D K
14-402 1/2-13 B 3 1/4 3 1/8 4 3/4 5/8 1/2
14-403 1/2-13 C 3 1/4 3 1/8 4 3/4 5/8 1/2
14-404 1/2-13 D 4 1/4 3 1/8 4 3/4 3/4 1/2
14-405 3/4-16 B 3 3/4 3 1/8 4 3/4 5/8 1/2
14-406 3/4-16 C 3 3/4 3 1/8 4 3/4 5/8 1/2
14-407 3/4-16 D 4 3/4 3 1/8 4 3/4 3/4 1/2
14-408 1-14 B 3 3/4 3 1/8 4 3/4 5/8 1/2
14-409 1-14 C 3 3/4 3 1/8 4 3/4 5/8 1/2
14-410 1-14 D 4 3/4 3 1/8 4 3/4 3/4 1/2
14-412 1 1/8-12 B 3 3/4 3 1/8 4 3/4 5/8 1/2
14-413 1 1/8-12 C 3 3/4 3 1/8 4 3/4 5/8 1/2
14-414 1 1/8-12 D 4 3/4 3 1/8 4 3/4 3/4 1/2
14-417 1 1/4-12 B 3 3/4 3 1/8 4 3/4 5/8 1/2
14-418 1 1/4-12 C 3 3/4 3 1/8 4 3/4 5/8 1/2
14-419 1 1/4-12 D 4 3/4 3 1/8 4 3/4 3/4 1/2
14-422 1 1/2-12 B 3 3/4 3 1/8 4 3/4 5/8 1/2
14-423 1 1/2-12 C 3 3/4 3 1/8 4 3/4 5/8 1/2
14-424 1 1/2-12 D 4 3/4 3 1/8 4 3/4 3/4 1/2
14-427 1 3/4-12 B 3 3/4 3 1/2 4 3/4 5/8 1/2
14-428 1 3/4-12 C 3 3/4 3 1/2 4 3/4 5/8 1/2
14-429 1 3/4-12 D 4 3/4 3 1/2 4 3/4 3/4 1/2
14-432 2-12 B 3 3/4 3 1/2 5 1/2 3/4 1/2
14-433 2-12 C 3 3/4 3 1/2 5 1/2 3/4 1/2
14-434 2-12 D 4 3/4 3 1/2 5 1/2 3/4 1/2
14-438 2 1/4-12 B 3 3/4 3 1/2 5 1/2 3/4 1/2
14-439 2 1/4-12 C 3 3/4 3 1/2 5 1/2 3/4 1/2
14-440 2 1/4-12 D 4 3/4 3 1/2 5 1/2 3/4 1/2
14-444 2 1/2-12 B 3 3/4 3 1/2 5 1/2 3/4 1/2
14-445 2 1/2-12 C 3 3/4 3 1/2 5 1/2 3/4 1/2
Manufactured of a light-
14-446 2 1/2-12 D 4 3/4 3 1/2 5 1/2 3/4 1/2
weight aluminum alloy, 14-449 2 3/4-12 B 3 3/4 4 7 1/2 3/4 5/8
the type ASTB, which 14-450 2 3/4-12 C 3 3/4 4 7 1/2 3/4 5/8
connects a threaded stud 14-451 2 3/4-12 D 4 3/4 4 7 1/2 1 5/8
to a flat bar bus, features 14-454 3-12 B 3 3/4 4 7 1/2 3/4 5/8
clamping hardware of 14-455 3-12 C 3 3/4 4 7 1/2 3/4 5/8
high tensile aluminum for 14-456 3-12 D 4 3/4 4 7 1/2 1 5/8
resistance to corrosion. 14-460 3 1/4-12 B 4 3/8 4 8 1/2 3/4 5/8
14-461 3 1/4-12 C 4 3/8 4 8 1/2 3/4 5/8
14-462 3 1/4-12 D 5 3/8 4 8 1/2 1 5/8
14-466 3 1/2-12 B 4 3/8 4 1/4 8 1/2 3/4 5/8
14-467 3 1/2-12 C 4 3/8 4 1/4 8 1/2 3/4 5/8
14-468 3 1/2-12 D 5 3/8 4 1/4 8 1/2 1 5/8
14-472 4-12 B 4 3/8 4 1/4 8 1/2 3/4 5/8
14-473 4-12 C 4 3/8 4 1/4 8 1/2 3/4 5/8
14-474 4-12 D 5 3/8 4 1/4 8 1/2 1 5/8
P
U
TEST TERMINAL COPPER STUD SECTION
SECTION
CONNECTORS TO BRONZE PAD 14-3-TT
DIMENSIONS (IN)
CATALOG STUD PAD
AMPERAGE
NUMBER SIZE STYLE A B
14-TT-336 1 1/8-12 B 2000 19 3
14-TT-337 1 1/8-12 C 2000 19 3
14-TT-338 1 1/8-12 D 2000 20 3
14-TT-341 1 1/4-12 B 2000 19 3
14-TT-342 1 1/4-12 C 2000 19 3
14-TT-343 1 1/4-12 D 2000 20 3
14-TT-346 1 1/2-12 B 2000 19 3
14-TT-347 1 1/2-12 C 2000 19 3
14-TT-348 1 1/2-12 D 2000 20 3
14-TT-351 1 3/4-12 B 2000 19 3
14-TT-352 1 3/4-12 C 2000 19 3
14-TT-353 1 3/4-12 D 2000 20 3
14-TT-356 2-12 B 3000 19 3
14-TT-357 2-12 C 3000 19 3
14-TT-358 2-12 D 3000 20 3
14-TT-362 2 1/4-12 B 3000 19 3
14-TT-363 2 1/4-12 C 3000 19 3
14-TT-364 2 1/4-12 D 3000 20 3
14-TT-368 2 1/2-12 B 3000 19 3
14-TT-369 2 1/2-12 C 3000 19 3
14-TT-370 2 1/2-12 D 3000 20 3
14-TT-373 2 3/4-12 B 3000 19 3
14-TT-374 2 3/4-12 C 3000 19 3
14-TT-375 2 3/4-12 D 3000 20 3
14-TT-378 3-12 B 3000 19 3
14-TT-379 3-12 C 3000 19 3
14-TT-380 3-12 D 3000 20 3
14-TT-384 3 1/4-12 B 3000 19 3
14-TT-385 3 1/4-12 C 3000 19 3
14-TT-386 3 1/4-12 D 3000 20 3
14-TT-390 3 1/2-12 B 3000 19 3
14-TT-391 3 1/2-12 C 3000 19 3
14-TT-392 3 1/2-12 D 3000 20 3
14-TT-396 4-12 B 4000 19 3
14-TT-397 4-12 C 4000 19 3
14-TT-398 4-12 D 4000 20 3
The Travis Test Terminal makes isolating equipment without disconnecting ridge bus
an easy process. Additionally, Travis Test Terminals are comprised of a bronze bot-
tom terminal eliminating galvanic corrosion at the stud. Within the assembly of the
terminal, the transition is made from the bronze bottom terminal to the bronze pad top
terminal.
The configuration shown here is for 4” wide D pads. If drawings are required for B or
C pads, please call the factory.
P
U
SECTION
SECTION TEST TERMINAL COPPER STUD
14-3A-TT CONNECTORS TO ALUMINUM PAD
DIMENSIONS (IN)
CATALOG STUD PAD
AMPERAGE
NUMBER SIZE STYLE A B
14-TT-422 1 1/2-12 B 2000 19 3
14-TT-423 1 1/2-12 C 2000 19 3
14-TT-424 1 1/2-12 D 2000 20 3
14-TT-427 1 3/4-12 B 2000 19 3
14-TT-428 1 3/4-12 C 2000 19 3
14-TT-429 1 3/4-12 D 2000 20 3
14-TT-432 2-12 B 3000 19 3
14-TT-433 2-12 C 3000 19 3
14-TT-434 2-12 D 3000 20 3
14-TT-438 2 1/4-12 B 3000 19 3
14-TT-439 2 1/4-12 C 3000 19 3
14-TT-440 2 1/4-12 D 3000 20 3
14-TT-444 2 1/2-12 B 3000 19 3
14-TT-445 2 1/2-12 C 3000 19 3
14-TT-446 2 1/2-12 D 3000 20 3
14-TT-449 2 3/4-12 B 3000 19 3
14-TT-450 2 3/4-12 C 3000 19 3
14-TT-451 2 3/4-12 D 3000 20 3
14-TT-454 3-12 B 3000 19 3
14-TT-455 3-12 C 3000 19 3
14-TT-456 3-12 D 3000 20 3
14-TT-460 3 1/4-12 B 3000 19 3
14-TT-461 3 1/4-12 C 3000 19 3
14-TT-462 3 1/4-12 D 3000 20 3
14-TT-466 3 1/2-12 B 3000 19 3
14-TT-467 3 1/2-12 C 3000 19 3
14-TT-468 3 1/2-12 D 3000 20 3
14-TT-472 4-12 B 4000 19 3
14-TT-473 4-12 C 4000 19 3
14-TT-474 4-12 D 4000 20 3
The Travis Test Terminal makes isolating equipment without disconnecting ridge bus an easy process. Addition-
ally, Travis Test Terminals are comprised of a bronze bottom terminal eliminating galvanic corrosion at the stud.
Within the assembly of the terminal, the transition is made from the bronze stud connector to the aluminum top
pad.
The configuration shown here is for 4” wide D pads. If drawings are required for B or C pads or if an aluminum
stud connector is required, please call the factory.
P
U
BRONZE EXPANSION SECTION
TERMINALS, PIPE TO FLAT PAD 15-1

CATALOG PAD
SIZE HARDWARE
NUMBER STYLE A B C D
IPS
15-234 3/4 B 12 2 3/4 2 3/4 3/8 1/2
15-235 3/4 C 12 2 3/4 2 3/4 3/8 1/2
15-236 3/4 D 12 2 3/4 2 3/4 3/8 1/2 D
15-237 1 B 16 3 3/16 3 3/16 7/16 1/2

15-238 1 C 16 3 3/16 3 3/16 7/16 1/2
A
15-239 1 D 16 3 3/16 3 3/16 7/16 1/2 B
(APPROXIMATE)
15-240 1 1/4 B 16 3 1/8 3 1/8 7/16 1/2

15-241 1 1/4 C 16 3 1/8 3 1/8 7/16 1/2
15-242 1 1/4 D 16 3 1/8 3 1/8 7/16 1/2
C
15-243 1 1/2 B 16 3 1/16 3 1/16 1/2 1/2
15-244 1 1/2 C 16 3 1/16 3 1/16 1/2 1/2
15-245 1 1/2 D 16 3 1/16 3 1/16 1/2 1/2
15-246 2 B 16 3 1/8 3 1/8 1/2 1/2
15-247 2 C 16 3 1/8 3 1/8 1/2 1/2
15-248 2 D 16 3 1/8 3 1/8 1/2 1/2
15-249 2 1/2 B 16 4 4 5/8 5/8 For Pad Rotated 90 Degrees
Use Suffix (V)
15-250 2 1/2 C 16 4 4 5/8 5/8
Example 15-244V
15-251 2 1/2 D 16 4 4 5/8 5/8
15-252 3 B 16 3 15/16 3 15/16 11/16 5/8 To protect equipment bushings,
15-253 3 C 16 3 15/16 3 15/16 11/16 5/8 switch gear, and insulators
15-254 3 D 16 3 15/16 3 15/16 11/16 5/8 from expanding or contracting
15-255 3 1/2 B 16 3 3/4 3 3/4 3/4 5/8 pressures, the type BETP,
15-256 3 1/2 C 16 3 3/4 3 3/4 3/4 5/8 which joins a pipe to a flat bar
15-257 3 1/2 D 16 3 3/4 3 3/4 3/4 5/8 bus, efficiently compensates
15-258 4 B 16 4 5/8 4 5/8 7/8 5/8 for temperature variations.
15-259 4 C 16 4 5/8 4 5/8 7/8 5/8 Made of a high conductivity
15-260 4 D 16 4 5/8 4 5/8 7/8 5/8 copper alloy for strength and
15-261 4 1/2 B 16 4 3/4 4 3/4 1 5/8 durability, it features flexible
15-262 4 1/2 C 16 4 3/4 4 3/4 1 5/8 shunts of laminated soft
15-263 4 1/2 D 16 4 3/4 4 3/4 1 5/8 copper designed to carry
15-264 5 B 25 5 1/16 5 1/16 1 1/8 5/8 the maximum current of
15-265 5 C 25 5 1/16 5 1/16 1 1/8 5/8 the bus it connects.
15-266 5 D 25 5 1/16 5 1/16 1 1/8 5/8
To enhance clamping
15-267 6 B 25 6 6 1 1/4 5/8
capabilities and resistance
15-268 6 C 25 6 6 1 1/4 5/8
to corrosion, all bolts, nuts,
15-269 6 D 25 6 6 1 1/4 5/8
and lockwashers are silicon
FOR EHPS (SCH80) INTERNAL PIPE FITTINGS USE SUFFIX (H)
EX. 15-269H
bronze. For single-wrench
installation, bolt heads are
captivated.
P
U
SECTION ALUMINUM EXPANSION
15-1A TERMINALS, PIPE TO FLAT PAD
PIPE DIMENSIONS IN
CATALOG PAD INCHES
SIZE HARDWARE
NUMBER STYLE
IPS A B C
15-270 1/2 B 16.5 4 3/8 1/2
15-271 1/2 C 16.5 4 3/8 1/2
15-272 1/2 D 17.5 4 3/8 1/2
15-273 3/4 B 16.5 2 3/4 3/8 1/2
15-274 3/4 C 16.5 2 3/4 3/8 1/2
15-275 3/4 D 17.5 2 3/4 3/8 1/2
15-276 1 B 16.5 3 3/16 7/16 1/2
15-277 1 C 16.5 3 3/16 7/16 1/2
15-278 1 D 17.5 3 3/16 7/16 1/2
15-279 1 1/4 B 16.5 3 1/8 7/16 1/2
15-280 1 1/4 C 16.5 3 1/8 7/16 1/2
15-281 1 1/4 D 17.5 3 1/8 7/16 1/2
15-282 1 1/2 B 16.5 3 1/16 1/2 1/2
15-283 1 1/2 C 16.5 3 1/16 1/2 1/2
15-284 1 1/2 D 17.5 3 1/16 1/2 1/2
15-285 2 B 16.5 3 1/8 1/2 1/2
For Pad Rotated 90 Degrees 15-286 2 C 16.5 3 1/8 1/2 1/2
Use Suffix (V) 15-287 2 D 17.5 3 1/8 1/2 1/2
Example 15-292V 15-288 2 1/2 B 16.5 4 5/8 5/8
15-289 2 1/2 C 16.5 4 5/8 5/8
When it is necessary to connect 15-290 2 1/2 D 17.5 4 5/8 5/8
a pipe to a flat bar bus and 15-291 3 B 16.5 3 15/16 11/16 5/8
compensate for temperature 15-292 3 C 16.5 3 15/16 11/16 5/8
variations, the type AETP is a 15-293 3 D 17.5 3 15/16 11/16 5/8
dependable connector. 15-294 3 1/2 B 16.5 3 3/4 3/4 5/8
15-295 3 1/2 C 16.5 3 3/4 3/4 5/8
Made of a lightweight aluminum
15-296 3 1/2 D 17.5 3 3/4 3/4 5/8
alloy, it effectively protects
15-297 4 B 16.5 4 5/8 7/8 5/8
equipment bushings, switch gear, 15-298 4 C 16.5 4 5/8 7/8 5/8
and insulators from expanding 15-299 4 D 17.5 4 5/8 7/8 5/8
or contracting bar pressures. 15-300 4 1/2 B 16.5 4 3/4 1 5/8
The flexible shunts of laminated 15-301 4 1/2 C 16.5 4 3/4 1 5/8
soft aluminum are designed to 15-302 4 1/2 D 17.5 4 3/4 1 5/8
carry the maximum current of the 15-303 5 B 22 5 1/16 1 1/8 5/8
bus it connects. 15-304 5 C 22 5 1/16 1 1/8 5/8
15-305 5 D 23 5 1/16 1 1/8 5/8
Bolts, nuts, and lockwashers of 15-306 6 B 25.5 6 1 1/4 5/8
high tensile aluminum insure 15-307 6 C 25.5 6 1 1/4 5/8
clamping strength and resistance 15-308 6 D 26.5 6 1 1/4 5/8
to wear. To facilitate installation, FOR EHPS (SCH80) INTERNAL PIPE FITTINGS USE SUFFIX (H)
all bolt heads are captivated. EX. 15-308H
P
U
COUPLER, PIPE TO PIPE 15-2
CATALOG SIZE IPS DIMENSIONS IN INCHES

HARDWARE
NUMBER IPS TAP A B C
15-101 1/2 1/2 12 3 3 3/8
15-103 3/4 3/4 12 2 3/4 2 3/4 1/2
15-106 1 1 16 3 3/16 3 3/16 1/2
15-110 1 1/4 1 1/4 16 3 1/8 3 1/8 1/2
15-114 1 1/2 1 1/2 16 3 1/16 3 1/16 1/2
15-119 2 2 16 3 1/8 3 1/8 1/2
15-124 2 1/2 2 1/2 16 4 4 5/8
15-129 3 3 16 3 15/16 3 15/16 5/8
15-135 3 1/2 3 1/2 16 3 3/4 3 3/4 5/8
15-149 4 1/2 4 1/2 18 4 3/4 4 3/4 5/8
15-157 5 5 25 5 5 5/8
15-165 6 6 26 6 6 5/8

EX. 15-149H
A rugged connector for joining a tube to a pipe bus, the type BETT, cast of a
high conductivity copper alloy for durability, also compensates for temperature
variations and thus protects equipment bushings, switch gear, and insulators
from expanding or contracting pressures.
Flexible shunts of laminated soft copper are designed to carry the maximum
current of the bus it connects. It features silicon bronze clamping hardware
for resistance to corrosion.
P
U
15-2A COUPLER, PIPE TO PIPE

HARDWARE
NUMBER MAIN TAP A B C
15-166 1/2 1/2 15 4 4 3/8
15-168 3/4 3/4 15 2 3/4 2 3/4 1/2
15-171 1 1 16 3 3/16 3 3/16 1/2
15-175 1 1/4 1 1/4 16 3 1/8 3 1/8 1/2
15-179 1 1/2 1 1/2 16 3 1/16 3 1/16 1/2
15-184 2 2 16 3 1/8 3 1/8 1/2
15-189 2 1/2 2 1/2 16 4 4 5/8
15-194 3 3 16 3 15/16 3 15/16 5/8
15-200 3 1/2 3 1/2 16 3 3/4 3 3/4 5/8
15-207 4 4 16 4 5/8 4 5/8 5/8
15-214 4 1/2 4 1/2 16 4 3/4 4 3/4 5/8
15-222 5 5 20.5 5 1/16 5 1/16 5/8
15-230 6 6 24 6 6 5/8

EX. 15-214H
Featuring a more lightweight aluminum alloy casting, the type AETT joins
a pipe to pipe bus with maximum efficiency by also compensating for
temperature variations and thereby protecting equipment bushings,
switch gear, and insulators from expanding or contracting pressures.
Made of laminated soft aluminum, the flexible shunts are designed
to withstand the maximum current of the bus it connects. Since all
bolts, nuts, and lockwashers are made of high tensile aluminum, the
connector demonstrates greater clamping strength and resistance
to corrosion in the field.
P
U
COUPLERS, BUS SUPPORTS 15-3
MOUNTING DIMENSIONS IN INCHES

CATALOG IPS
BOLT
NUMBER MAIN A B K
CIRCLE
15-416 1/2 3 12 3 3/8
15-417 1/2 5 12 3 3/8 K
15-418 3/4 3 12 2 3/4 1/2

15-419 3/4 5 12 2 3/4 1/2
15-420 1 3 16 3 3/16 1/2
15-421 1 5 16 3 3/16 1/2 A
(APPROXIMATE)
15-422 1 1/4 3 16 3 1/8 1/2
15-423 1 1/4 5 16 3 1/8 1/2
15-424 1 1/2 3 16 3 1/16 1/2
15-425 1 1/2 5 16 3 1/16 1/2
To protect equipment bushings,
15-426 2 3 18 3 1/8 1/2
switch gear, and insulators from
15-427 2 5 18 3 1/8 1/2 expanding or contracting pressures,
15-428 2 1/2 3 18 4 5/8 the type BEBS, which joins a pipe to
15-429 2 1/2 5 18 4 5/8 a pipe bus, efficiently compensates
15-430 3 3 18 3 15/16 5/8 for temperature variations.
15-431 3 5 18 3 15/16 5/8
Made of a high conductivity copper
15-432 3 1/2 3 18 3 3/4 5/8
15-433 3 1/2 5 18 3 3/4 5/8 alloy for strength and durability, it
15-434 4 3 18 4 5/8 5/8 features flexible shunts of laminated
15-435 4 5 18 4 5/8 5/8 soft copper designed to carry the
15-436 4 1/2 3 18 4 3/4 5/8 maximum current of the bus it connects.
15-437 4 1/2 5 18 4 3/4 5/8
To enhance clamping capabilities and
15-438 5 3 25 5 1/16 5/8
resistance to corrosion, all bolts, nuts,
15-439 5 5 25 5 1/16 5/8
15-440 6 3 26 6 5/8
and lockwashers are silicon bronze.
15-441 6 5 26 6 5/8 Steel galvanized bolts and lock-
FOR EHPS (SCH80) INTERNAL PIPE FITTINGS USE SUFFIX (H) washers are supplied for mounting
EX. 15-441H to the insulator cap.
P
U
15-3A COUPLERS, BUS SUPPORTS
MOUNTING DIMENSIONS IN INCHES

CATALOG IPS
BOLT
NUMBER MAIN A B K
CIRCLE
15-442 1/2 3 12 4 1/2
15-443 1/2 5 12 4 1/2
15-444 3/4 3 12 2 3/4 1/2
15-445 3/4 5 12 2 3/4 1/2
15-446 1 3 16 3 3/16 1/2
15-447 1 5 21 3 3/16 1/2
When it is necessary to join a pipe 15-448 1 1/4 3 16 3 1/8 1/2
to a pipe bus and compensate
15-449 1 1/4 5 21 3 1/8 1/2
for temperature variations, the
15-450 1 1/2 3 16 3 1/16 1/2
type AEBS proves a dependable
connector. 15-451 1 1/2 5 21 3 1/16 1/2
15-452 2 3 18 3 1/8 1/2
Made of a lightweight aluminum
alloy, it effectively protects 15-453 2 5 21 3 1/8 1/2
equipment bushings, switch gear, 15-454 2 1/2 3 18 4 5/8
and insulators from expanding 15-455 2 1/2 5 21 4 5/8
or contracting bus pressures. 15-456 3 3 18 3 15/16 5/8
The flexible shunts of laminated 15-457 3 5 21 3 15/16 5/8
soft aluminum are designed to 15-458 3 1/2 3 18 3 3/4 5/8
carry the maximum current of 15-459 3 1/2 5 21 3 3/4 5/8
the bus it connects.
15-460 4 3 18 4 5/8 5/8
Bolts, nuts, and lockwashers of 15-461 4 5 23 4 5/8 5/8
high tensile aluminum insure 15-462 4 1/2 3 18 4 3/4 5/8
greater clamping strength and
15-463 4 1/2 5 23 4 3/4 5/8
resistance to wear.
15-464 5 3 25 5 1/16 5/8
Steel galvanized bolts and lock- 15-465 5 5 26 5 1/16 5/8
washers are normally supplied for
15-466 6 3 25 6 5/8
mounting to the insulator cap.
Bus end plugs are also included. 15-467 6 5 26 6 5/8

EX. 15-467H
P
U
CONNECTORS, STUD TO PIPE 15-4
CATALOG STUD IPS DIMENSIONS IN INCHES

HARDWARE
NUMBER SIZE TAP A B C
15-468 1/2-13 1/2 12 3 2 3/8
15-469 1/2-13 3/4 12 2 3/4 2 1/2 & 3/8
15-470 1/2-13 1 16 3 3/16 2 1/2 & 3/8
15-471 3/4-16 1/2 12 3 2 3/8
15-472 3/4-16 3/4 12 2 3/4 2 1/2 & 3/8
15-473 3/4-16 1 16 3 3/16 2 1/2 & 3/8
15-474 1-14 1/2 12 3 2 1/4 1/2 & 3/8
15-475 1-14 3/4 12 2 3/4 2 1/4 1/2
15-476 1-14 1 16 3 3/16 2 1/4 1/2
15-477 1-14 1 1/4 16 3 1/8 2 1/4 1/2
15-478 1 1/8-12 1/2 12 3 2 1/4 1/2 & 3/8
15-479 1 1/8-12 3/4 12 2 3/4 2 1/4 1/2
15-480 1 1/8-12 1 16 3 3/16 2 1/4 1/2
15-481 1 1/8-12 1 1/4 16 3 1/8 2 1/4 1/2
15-482 1 1/4-12 1/2 12 3 2 1/2 1/2 & 3/8
90 DEGREE USE
15-483 1 1/4-12 3/4 12 2 3/4 2 1/2 1/2
15-484 1 1/4-12 1 16 3 3/16 2 1/2 1/2 SUFFIX -90
15-485 1 1/4-12 1 1/4 16 3 1/8 2 1/2 1/2
15-486 1 1/4-12 1 1/2 16 3 1/16 2 1/2 1/2
15-487 1 1/2-12 1/2 12 3 2 1/2 1/2 & 3/8
15-488 1 1/2-12 3/4 12 2 3/4 2 1/2 1/2
15-489 1 1/2-12 1 16 3 3/16 2 1/2 1/2 A rugged connector for joining
15-490 1 1/2-12 1 1/4 16 3 1/8 2 1/2 1/2 a threaded stud to a pipe bus,
15-491 1 1/2-12 1 1/2 16 3 1/16 2 1/2 1/2 the type BESP cast of a high
15-492 1 1/2-12 2 16 3 1/8 2 1/2 1/2
15-493 1 3/4-12 3/4 12 2 3/4 2 1/2 1/2
conductivity copper alloy for
15-494 1 3/4-12 1 12 3 3/16 2 1/2 1/2 durability also compensates for
15-495 1 3/4-12 1 1/4 16 3 1/8 2 1/2 1/2 temperature variations and thus
15-496 1 3/4-12 1 1/2 16 3 1/16 2 1/2 1/2 protects equipment bushings,
15-497 1 3/4-12 2 16 3 1/8 2 1/2 1/2
15-498 2-12 1 16 3 3/16 2 1/2 5/8 & 1/2
switch gear, and insulators
15-499 2-12 1 1/4 16 3 1/8 2 1/2 5/8 & 1/2 from expanding or contraction
15-500 2-12 1 1/2 16 3 1/16 2 1/2 5/8 & 1/2 pressures.
15-501 2-12 2 16 3 1/8 2 1/2 5/8 & 1/2
15-502 2-12 2 1/2 16 4 2 1/2 5/8 Flexible shunts of laminated soft
15-503 2 1/4-12 1 1/4 16 3 1/8 2 1/2 5/8 & 1/2 copper are designed to carry
15-504 2 1/4-12 1 1/2 16 3 1/16 2 1/2 5/8 & 1/2 the maximum current of the
15-505 2 1/4-12 2 16 3 1/8 2 1/2 5/8 & 1/2
15-506 2 1/4-12 2 1/2 16 4 2 1/2 5/8
bus it connects.
15-507 2 1/2-12 1 1/2 16 3 1/16 2 1/2 5/8 & 1/2 It features silicon bronze clamping
15-508 2 1/2-12 2 16 3 1/8 2 1/2 5/8 & 1/2 hardware for resistance to corro-
15-509 2 1/2-12 2 1/2 16 4 2 1/2 5/8
15-510 2 1/2-12 3 16 3 15/16 2 1/2 5/8 sion and recessed bolt heads for
15-511 2 3/4-12 1 1/2 16 3 1/16 3 1/4 5/8 & 1/2 single-wrench installation.
15-512 2 3/4-12 2 16 3 1/8 3 1/4 5/8 & 1/2
15-513 2 3/4-12 2 1/2 16 4 3 1/4 5/8 Unthreaded studs or stud sizes
15-514 2 3/4-12 3 16 3 15/16 3 1/4 5/8 not listed must be specified with
15-515 2 3/4-12 3 1/2 16 3 3/4 3 1/4 5/8 the order.
EX. 15-515H
P
U
SECTION BRONZE EXPANSION
15-4 COUPLERS, STUD TO PIPE, continued
90 DEGREE USE
SUFFIX -90

IPS TAP HARDWARE
NUMBER SIZE A B C
15-516 3-12 2 16 3 1/8 3 1/4 5/8 & 1/2
15-517 3-12 2 1/2 16 4 3 1/4 5/8
15-518 3-12 3 16 3 15/16 3 1/4 5/8
15-519 3-12 3 1/2 16 3 3/4 3 1/4 5/8
15-520 3-12 4 16 4 5/8 3 1/4 5/8
15-521 3 1/4-12 2 1/2 16 4 3 1/4 5/8
15-522 3 1/4-12 3 16 3 15/16 3 1/4 5/8
15-523 3 1/4-12 3 1/2 16 3 3/4 3 1/4 5/8
15-524 3 1/4-12 4 16 4 5/8 3 1/4 5/8
15-525 3 1/2-12 2 1/2 16 4 3 1/2 5/8
15-526 3 1/2-12 3 16 3 15/16 3 1/2 5/8
15-527 3 1/2-12 3 1/2 16 3 3/4 3 1/2 5/8
15-528 3 1/2-12 4 16 4 5/8 3 1/2 5/8
15-529 4-12 2 /12 16 4 3 1/2 5/8
15-530 4 -12 3 16 3 15/16 3 1/2 5/8
15-531 4 -12 3 /12 16 3 3/4 3 1/2 5/8
15-532 4-12 4 16 4 5/8 3 1/2 5/8
EX. 15-532H
P
U
EXPANSION CONNECTORS, SECTION
BRONZE STUD TO ALUMINUM PIPE 15-4A
90 DEGREE USE
SUFFIX -90
CATALOG STUD IPS DIMENSIONS IN INCHES

HARDWARE
NUMBER SIZE TAP A B C
15-533 1/2-13 1/2 12 4 2 1/2 & 3/8
15-534 1/2-13 3/4 12 2 3/4 2 1/2 & 3/8
15-535 1/2-13 1 16 3 3/16 2 1/2 & 3/8
The type AESP joins a bronze
15-536 3/4-16 1/2 12 4 2 1/2 & 3/8 stud to an aluminum tube with
15-537 3/4-16 3/4 12 2 3/4 2 1/2 & 3/8 maximum efficiency by also
15-538 3/4-16 1 16 3 3/16 2 1/2 & 3/8 compensating for temperature
15-539 1-14 1/2 12 4 2 1/4 1/2 variations and thereby protecting
15-540 1-14 3/4 12 2 3/4 2 1/4 1/2 equipment bushings, switch gear,
15-541 1-14 1 16 3 3/16 2 1/4 1/2 and insulators from expanding
15-542 1-14 1 1/4 16 3 1/8 2 1/4 1/2 or contracting pressures.
15-543 1 1/8-12 1/2 12 4 2 1/4 1/2
15-544 1 1/8-12 3/4 12 2 3/4 2 1/4 1/2 The laminated flexible shunts
15-545 1 1/8-12 1 16 3 3/16 2 1/4 1/2 are designed to withstand the
15-546 1 1/8-12 1 1/4 16 3 1/8 2 1/4 1/2 maximum current of the bus it
15-547 1 1/4-12 1/2 12 4 2 1/2 1/2 connects.
15-548 1 1/4-12 3/4 12 2 3/4 2 1/2 1/2
15-549 1 1/4-12 1 16 3 3/16 2 1/2 1/2 Bolts, nuts, and lockwashers
15-550 1 1/4-12 1 1/4 16 3 1/8 2 1/2 1/2 made of a high strength material
15-551 1 1/4-12 1 1/2 16 3 1/16 2 1/2 1/2 enhance clamping strength and
15-552 1 1/2-12 1/2 12 4 2 1/2 1/2 resistance to corrosion in the field.
15-553 1 1/2-12 3/4 12 2 3/4 2 1/2 1/2
15-554 1 1/2-12 1 16 3 3/16 2 1/2 1/2
For unthreaded studs or stud
15-555 1 1/2-12 1 1/4 16 3 1/8 2 1/2 1/2 sizes not listed, please specify
15-556 1 1/2-12 1 1/2 16 3 1/16 2 1/2 1/2 with the order.
15-557 1 1/2-12 2 16 3 1/8 2 1/2 1/2
15-558 1 3/4-12 3/4 12 2 3/4 2 1/2 1/2
15-559 1 3/4-12 1 16 3 3/16 2 1/2 1/2
15-560 1 3/4-12 1 1/4 16 3 1/8 2 1/2 1/2
15-561 1 3/4-12 1 1/2 16 3 1/16 2 1/2 1/2
15-562 1 3/4-12 2 16 3 1/8 2 1/2 1/2
15-563 2-12 1 16 3 3/16 2 1/2 5/8 & 1/2
15-564 2-12 1 1/4 16 3 1/8 2 1/2 5/8 & 1/2
15-565 2-12 1 1/2 16 3 1/16 2 1/2 5/8 & 1/2
15-566 2-12 2 16 3 1/8 2 1/2 5/8 & 1/2
15-567 2-12 2 1/2 16 4 2 1/2 5/8 Continued on next page
EX. 15-567H
P
U
SECTION EXPANSION CONNECTORS,
15-4A BRONZE STUD TO ALUMINUM PIPE
90 DEGREE USE
SUFFIX -90

CATALOG STUD
SIZE HARDWARE
NUMBER SIZE A B C
IPS
15-568 2 1/4-12 1 1/4 12 3 1/8 2 1/2 5/8 & 1/2
15-569 2 1/4-12 1 1/2 12 3 1/16 2 1/2 5/8 & 1/2
15-570 2 1/4-12 2 12 3 1/8 2 1/2 5/8 & 1/2
15-571 2 1/4-12 2 1/2 14 4 2 1/2 5/8
15-572 2 1/2-12 1 1/2 12 3 1/16 2 1/2 5/8 & 1/2
15-573 2 1/2-12 2 12 3 1/8 2 1/2 5/8 & 1/2
15-574 2 1/2-12 2 1/2 14 4 2 1/2 5/8
15-575 2 1/2-12 3 14 3 15/16 2 1/2 5/8
15-576 2 3/4-12 1 1/2 12 3 1/16 3 1/4 5/8 & 1/2
15-577 2 3/4-12 2 12 3 1/8 3 1/4 5/8 & 1/2
15-578 2 3/4-12 2 1/2 14 4 3 1/4 5/8
15-579 2 3/4-12 3 14 3 15/16 3 1/4 5/8
15-580 2 3/4-12 3 1/2 14 3 3/4 3 1/4 5/8
15-581 3-12 2 12 3 1/8 3 1/4 5/8 & 1/2
15-582 3-12 2 1/2 14 4 3 1/4 5/8
15-583 3-12 3 14 3 15/16 3 1/4 5/8
15-584 3-12 3 1/2 14 3 3/4 3 1/4 5/8
15-585 3-12 4 14 4 5/8 3 1/4 5/8
15-586 3 1/4-12 2 1/2 14 4 3 1/4 5/8
15-587 3 1/4-12 3 14 3 15/16 3 1/4 5/8
15-588 3 1/4-12 3 1/2 14 3 3/4 3 1/4 5/8
15-589 3 1/4-12 4 14 4 5/8 3 1/4 5/8
15-590 3 1/2-12 2 1/2 14 4 3 1/2 5/8
15-591 3 1/2-12 3 14 3 15/16 3 1/2 5/8
15-592 3 1/2-12 3 1/2 14 3 3/4 3 1/2 5/8
15-593 3 1/2-12 4 14 4 5/8 3 1/2 5/8
15-594 4-12 2 1/2 14 4 3 1/2 5/8
15-595 4-12 3 14 3 15/16 3 1/2 5/8
15-596 4-12 3 1/2 14 3 3/4 3 1/2 5/8
FOR EHPS (SCH80) INTERNAL 15-597 4-12 4 14 4 5/8 3 1/2 5/8
PIPE FITTINGS USE SUFFIX (H)
EX. 15-597H
P
U
BRONZE EXPANSION CONNECTORS SECTION
STRAIGHT AND 90 DEGREE BENDS 15-5




 Straight
90 Degree
STRAIGHT EXPANSION BENDS

Made of a high conductivity
CURRENT RATING copper, the type BEB and type
NUMBER STYLE A B
BEB90 efficiently compensate
15-679 B 17 6 400 for temperature variations and
15-680 C 17 6 690 therefore protect equipment
bushings, switch gear, and
15-681 D 17 6 900 insulators from expanding
15-682 B 17 6 640
or contracting pressures.
The flexible shunts of laminated
15-683 C 17 6 970
soft copper are designed to carry
15-684 D 17 6 1200 the maximum current listed.
Other current ratings are available
upon request.
90° EXPANSION BENDS
CURRENT RATING
NUMBER STYLE A B C
15-685 B 7 9 3 400
15-686 C 7 9 3 690
15-687 D 8 9 4 900
15-688 B 8 9 3 640
15-689 C 8 9 3 970
For example: 15-684-2000AMP
15-690 D 9 9 4 1200
P
U
SECTION ALUMINUM EXPANSION CONNECTORS
15-5A STRAIGHT AND 90 DEGREE BENDS


Straight

90 Degree
STRAIGHT EXPANSION BENDS

DIMENSIONS IN
CATALOG PAD INCHES CURRENT RATING
NUMBER STYLE
Made of a lightweight aluminum A B
alloy, the type AEB and type 15-691 B 17 6 340
AEB90 effectively protect 15-692 C 17 6 540
equipment bushings, switch 15-693 D 17 6 700
gear, and insulators from
expanding or contracting 15-694 B 17 6 540
pressures. 15-695 C 17 6 760
The flexible shunts of laminated 15-696 D 17 6 960
soft aluminum can withstand
the maximum current listed.
90° EXPANSION BENDS
DIMENSIONS IN
Other current ratings are CATALOG PAD INCHES CURRENT RATING
available upon request. NUMBER STYLE
A B C
15-697 B 7 9 3 340
15-698 C 7 9 3 540
15-699 D 8 9 4 700
15-700 B 8 9 3 540
15-701 C 8 9 3 760
15-702 D 9 9 4 960
For example: 15-702-1200AMP
P
U
EXPANSION SUPPORT
INSTALLATION INSTRUCTIONS
CHART INSTRUCTIONS
1. Locate bus temperature at bottom of chart.
2. Using the diagonal line for maximum bus length of

240ft.(120ft per side)----------------7”B.C.
160ft.(80ft. per side)-----------------5”B.C.
80ft. (40ft per side)-------------------3”B.C.
Find the appropriate dimension “X”
3. “X” measurement to be taken with the end plugs in

X/2 stalled.
X
(Extended to conserve phase spacing.)
8
7.5
7
6.5
6
5.5 7" B
.C.
"X" (INCHES)
5
4.5
5" B
4 .C.
3.5
3
2.5 3" B.C.
2
1.5
1
0.5
0
-20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170
ALUMINUM BUS TEMPN (F)
P
U
EXPANSION TERMINAL
CHART INSTRUCTIONS

140ft. find the appropriate dimension “X”.
3. The chart may only be used for bus lengths

less than 140ft.

4.5
3.5
3
"X" (INCHES)
2.5
1.5
0.5
0
-20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170
PRODUCT DESIGN UTILITY • Manufactured by: Pattern & Foundry, Inc.

EXPANSION COUPLER INSTALLATION
INSTRUCTIONS
CHART INSTRUCTIONS


less than 140ft.
4.5
3.5
3
"X" (INCHES)
2.5
1.5
0.5
0
-20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170
P
U
COPPER COMPRESSION SECTION
FITTINGS CABLE TO FLAT PAD 16-1
COPPER TYPE BCP

CATALOG CABLE SIZE DIMENSIONS
IN INCHES DIE PAD
NUMBER AWG or MCM REF THICKNESS
W/ PAD SIZE MIN MAX A B
16-101B 2 6 1/4 2 0.640 1/4
16-102B 1/0 6 7/16 2 3/4 0.840 5/16
16-103B 2/0 6 7/8 2 3/4 0.840 5/16 
16-104B 3/0 6 7/8 2 3/4 0.840 5/16
16-106B 4/0 6 7/8 2 3/4 0.840 5/16

16-106C 4/0 7 9/16 3 0.840 5/16
16-107B 250 6 15/16 2 3/4 0.840 5/16
16-107C 250 7 9/16 3 0.840 5/16
16-109B 300 7 3/8 3 1.0 5/16
16-109C 300 7 1/2 3 1.0 5/16
The pure copper compression
16-111B 350 6 1/2 2 5/8 1.125 3/8
16-111C 350 7 9/16 3 1.0 5/16
terminals for connecting copper
16-111D 350 8 1/2 3 1/2 1.0 5/16 cable bus to a flat pad have
16-113B 500 7 7/8 3 3/4 1.125 5/16 the crimping die sizes clearly
16-113C 500 8 3/4 4 1.125 3/8 marked for ease of installation.
16-113D 500 8 5/8 3 3/4 1.125 5/16
For pads other than parallel to
16-115B 750 8 5/8 4 1.312 3/8
16-115C 750 8 5/8 4 1.312 3/8
the cable bus add the degree
16-115D 750 9 1/4 3 3/4 1.312 3/8 variation from parallel to the
16-117B 800 9 1/4 4 1.5 3/8 catalog No.
16-117C 800 9 1/4 4 1.5 7/16 Example: for pad 45 degrees
16-117D 800 9 1/4 4 1/4 1.5 7/16
from parallel to cable run
16-119B 1000 8 3/4 4 1.5 7/16
16-119C 1000 8 3/4 4 1.5 7/16
specify catalog 16-113C-45.
16-119D 1000 9 1/2 4 1/2 1.5 5/16
16-120B 1250 10 1/8 5 2.375 3/4
16-120C 1250 10 1/8 5 2.375 3/4
16-120D 1250 9 1/2 4 1/2 2.375 5/16
16-121B 1500 9 4 1/4 2.375 5/8

16-121C 1500 9 1/4 4 1/2 2.375 5/8

16-121D 1500 9 1/2 4 1/2 2.375 5/8
16-122B 2000 9 4 1/4 2.375 3/4
16-122C 2000 9 1/4 4 1/2 2.375 3/4 

16-122D 2000 9 1/2 4 1/2 2.375 3/4
To insure the long term service and reliability of compression connectors the use of filler compounds is essential.
Additional filler should be used in any application where the connector is installed with the barrel in the upright position.
P
U
SECTION ALUMINUM COMPRESSION
16-1A FITTINGS CABLE TO FLAT PAD
ALUMINUM TYPE ACP

CATALOG AAC SIZE ACSR SIZE DIMENSIONS SHB DIE
CONDUCTOR PAD
NUMBER AWG or MCM AWG OR MCM DIAMETER
W/ PAD SIZE MIN. MAX MIN. MAX A B1 B2 REF. THICKNESS
The cast electrical aluminum 16-123B #2 #2 .292-.325 6 1/4 2 NA .625 3/8

compression terminals 16-124B 1/0 1/0 .326-.398 6 1/2 3 NA 0.840 3/8
for connecting aluminum 16-124C 1/0 1/0 .326-.398 6 1/2 3 NA 0.840 3/8
16-125B 2/0 2/0 .399-.447 6 1/2 3 NA 0.840 3/8
cable bus to a flat pad have
16-125C 2/0 2/0 .399-.447 6 1/2 3 NA 0.840 3/8
the crimping die sizes
16-128B 3/0 3/0 .448-.502 6 1/2 3 NA 0.840 3/8
clearly marked for ease
16-128C 3/0 3/0 .448-.502 6 1/2 3 NA 0.840 3/8
of installation.
16-129B 4/0 4/0 .503-.563 6 1/2 3 NA 0.840 3/8
For pads other than parallel 16-129C 4/0 4/0 .503-.563 6 1/2 3 NA 0.840 3/8
to the cable bus add the 16-130B 266.8-300 266.8(26/7) .564-.642 8 7/8 3 3/4 NA 1.125 3/8
degree variation from parallel 16-130C 266.8-300 266.8(26/7) .564-.642 8 7/8 3 3/4 NA 1.312 3/8
to the catalog No. 16-134B 336.4(19)-350(37) 336.4(36/1)-336.4(18/1) .643-.684 8 7/8 3 3/4 NA 1.125 3/8
16-134C 336.4(19)-350(37) 336.4(36/1)-336.4(18/1) .643-.684 8 7/8 3 3/4 NA 1.312 3/8
Example: for pad 45 degree 16-139B 397.5(19)-400(37) 336.4(26/7)-397.5(18/1) .685-.743 8 7/8 3 3/4 NA 1.125 3/8
from parallel to cable run 16-139C 397.5(19)-400(37) 336.4(26/7)-397.5(18/1) .685-.743 8 7/8 3 3/4 NA 1.312 3/8
specify catalog 16-161C-45. 16-144B 450(37)-500(37) 397.5(24/7)-477(18/1) .744-.814 8 7/8 3 3/4 NA 1.312 3/8
16-144C 450(37)-500(37) 397.5(24/7)-477(18/1) .744-.814 8 7/8 3 3/4 NA 1.312 3/8
16-146B 550(61)-556.5(37) 477(24/7)-477(30/7) .815-.883 8 7/8 3 3/4 NA 1.312 3/8
16-146C 550(61)-556.5(37) 477(24/7)-477(30/7) .815-.883 8 7/8 3 3/4 NA 1.312 3/8
16-148B 600(37)-650(91) 556.5(24/7)-556.5(30/7) .884-.953 9 1/4 4 NA 1.500 3/8
16-148C 600(37)-650(91) 556.5(24/7)-556.5(30/7) .884-.953 9 1/4 4 NA 1.500 3/8
16-152B 700(61)-817(61) 605(26/7)-715.5(30/19) .954-1.081 11 1/2 6 4 1.843 5/8
16-152C 700(61)-817(61) 605(26/7)-715.5(30/19) .954-1.081 12 6 1/2 4 1.843 5/8
16-152D 700(61)-817(61) 605(26/7)-715.5(30/19) .954-1.081 12 1/4 6 1/2 4 1.843 5/8
16-161B 900(37)-1000(61) 795(24/7)-874.5(54/7) 1.082-1.152 11 1/2 6 1/4 4 1.843 5/8
16-161C 900(37)-1000(61) 795(24/7)-874.5(54/7) 1.082-1.152 11 6 4 1.843 5/8
16-161D 900(37)-1000(61) 795(24/7)-874.5(54/7) 1.082-1.152 12 1/4 6 1/4 4 1.843 5/8
16-164B 1033.5(37)-1113(61) 900(54/7)-954(54/7) 1.153-1.216 11 1/8 6 1/4 5 2.125 3/4
16-164C 1033.5(37)-1113(61) 900(54/7)-954(54/7) 1.153-1.216 11 3/8 6 3/8 5 2.125 3/4
16-164D 1033.5(37)-1113(61) 900(54/7)-954(54/7) 1.153-1.216 12 3/16 6 1/2 5 2.125 3/4
16-165C 1192.5(61)-1272(61) 1033.5(54/7)- 1113(54/19) 1.217-1.300 13 3/8 8 1/2 5 1/2 2.375 3/4
16-165D 1192.5(61)-1272(61) 1033.5(54/7)- 1113(54/19) 1.217-1.300 14 3/8 8 1/2 5 1/2 2.375 3/4

16-167C 1400(91)-1510.5(61) 1272(45/7)-1351.5(54/19) 1.301-1.424 13 1/4 8 1/2 5 1/5 2.375 3/4

16-167D 1400(91)-1510.5(61) 1272(45/7)-1351.5(54/19) 1.301-1.424 14 3/8 8 1/2 5 1/2 2.375 3/4
 16-168C 1590(61)-1700(127) 1351.3(54/19)-1510.5(45/7) 1.425-1.503 13 3/8 8 1/2 5 1/2 2.375 3/4

16-168D 1590(61)-1700(127) 1351.3(54/19)-1510.5(45/7) 1.425-1.503 14 3/8 8 1/2 5 3/8 2.375 3/4
16-169C 1750(127) 1510.5(54/19)-1590(54/19) 1.504-1.545 13 3/8 8 1/2 5 3/8 2.375 3/4
Add suffix for the following 16-169D 1750(127) 1510.5(54/19)-1590(54/19) 1.504-1.545 14 3/8 8 1/2 5 3/8 2.375 3/4
Special configurations; 16-170D 2000(91)(127) 1780(84/19) 1.546-1.659 15 9 6 1/4 2.937 3/4
• SHB Short barrel 16-171D 2250(91)(127) 2156(84/19) 1.660-1.762 15 9 6 1/2 2.937 3/4
• FC Include filler compound 16-172D 2500(127) 1.763-1.824 15 9 6 1/2 2.937 3/4

16-173D 3000(127) 1.825-1.996 15 9 6 3/4 2.937 3/4
• FAB Fabricated form extruded
billet in lieu of cast 16-174D 3500(127) 1.997-2.160 15 9 6 3/4 2.937 3/4
P
U
ALUMINUM COMPRESSION SECTION
FITTINGS DOUBLE CABLE TO FLAT PAD 16-1A-2B
ALUMINUM DOUBLE CABLE COMPRESSION

CATALOG AAC ACSR DIMENSIONS SHB DIE
CONDUCTOR PAD
NUMBER AWG or MCM AWG OR MCM
DIAMETER A B1 B2 REF. THICKNESS
W/ PAD SIZE MIN. MAX MIN. MAX
16-152D-2C-* 700(61)-817(61) 605(26/7)-715.5(30/19) .954-1.081 13 1/4 7 3/8 3 7/8 1.843 3/4
16-161D-2C-* 900(37)-1000(61) 795(24/7)-874.5(54/7) 1.082-1.152 13 1/8 7 4 5/8 1.843 3/4
16-164D-2C-* 1033.5(37)-1113(61) 900(54/7)-954(54/7) 1.153-1.216 12 1/2 6 1/2 5 1/2 2.125 3/4
16-165D-2C-* 1192.5(61)-1272(61) 1033.5(54/7)- 1113(54/19) 1.217-1.300 14 1/2 8 1/2 5 1/2 2.375 3/4
16-167D-2C-* 1400(91)-1510.5(61) 1272(45/7)-1351.5(54/19) 1.301-1.424 14 1/2 8 1/2 5 1/2 2.375 3/4
16-168D-2C-* 1590(61)-1700(127) 1351.3(54/19)-1510.5(45/7) 1.425-1.503 14 7/8 8 1/2 5 3/8 2.375 3/4
16-169D-2C-* 1750(127) 1510.5(54/19)-1590(54/19) 1.504-1.545 14 7/8 8 1/2 5 3/8 2.375 3/4
16-170D-2C-8 2000(91)(127) 1780(84/19) 1.546-1.659 15 8 1/2 6 1/4 2.937 1
16-171D-2C-8 2250(91)(127) 2156(84/19) 1.660-1.762 15 1/4 8 1/2 6 1/2 2.937 1
16-172D-2C-8 2500(127) 1.763-1.824 15 1/4 9 6 1/2 2.937 1
16-173D-2C-8 3000(127) 1.825-1.996 15 1/4 9 6 3/4 2.937 1
16-174D-2C-8 3500(127) 1.997-2.160 15 1/4 9 6 3/4 2.937 1
PLEASE SPECIFY CABLE SPACING (*).

6” AND 8” ONLY (EX) 16-152D-2C-8 The cast electrical aluminum compression
terminals for connecting aluminum cable
* 170 AND UP 8” SPACING ONLY
bus to a flat pad have the crimping die
sizes clearly marked for ease of installation.
For pads other than parallel to the cable

bus add the degree variation from parallel

Add suffix for the following Special to the catalog No.

configurations;
• SHB Short barrel 

Example: for pad 45 deg. from parallel to
• FC Include filler compound
cable run specify catalog 16-161D-2C-6-45.
P
U
SECTION ALUMINUM SINGLE COMPRESSION
16-1A-A1C FITTINGS - CABLE TO FLAT PAD
ALUMINUM TYPE A1C

CATALOG AAC SIZE ACSR SIZE DIMENSIONS DIE
CONDUCTOR PAD
NUMBER AWG or MCM AWG or MCM
DIAMETER A B REF. THICKNESS
W/ PAD SIZE MIN. MAX MIN. MAX
A1C-123B #2 #2 .292-.325 6 1/4 2 0.640 3/8
The A1C aluminum compres-
A1C-124B 1/0 1/0 .326-.398 6 1/2 3 0.840 3/8
sion terminals for connecting
A1C-124C 1/0 1/0 .326-.398 6 1/2 3 0.840 3/8
aluminum cable to a flat pad
A1C-125B 2/0 2/0 .399-.447 6 1/2 3 0.840 3/8
utilizes a standard hex die
and can be installed with a A1C-125C 2/0 2/0 .399-.447 6 1/2 3 0.840 3/8
single crimp. The crimping A1C-128B 3/0 3/0 .448-.502 6 1/2 3 0.840 3/8
die sizes are clearly marked A1C-128C 3/0 3/0 .448-.502 6 1/2 3 0.840 3/8
for ease of installation. A1C-129B 4/0 4/0 .503-.563 6 1/2 3 0.840 3/8
A1C-129C 4/0 4/0 .503-.563 6 1/2 3 0.840 3/8
For pads other than parallel
A1C-130B 266.8-300 266.8(26/7) .564-.642 8 7/8 3 3/4 1.125 3/8
to the cable bus add the
A1C-130C 266.8-300 266.8(26/7) .564-.642 8 7/8 3 3/4 1.312 3/8
degree variation from parallel
A1C-134B 336.4(19)-350(37) 336.4(36/1)-336.4(18/1) .643-.684 8 7/8 3 3/4 1.125 3/8
to the catalog number.
A1C-134C 336.4(19)-350(37) 336.4(36/1)-336.4(18/1) .643-.684 8 7/8 3 3/4 1.312 3/8
Example: For a pad 45 A1C-139B 397.5(19)-400(37) 336.4(26/7)-397.5(18/1) .685-.743 8 7/8 3 3/4 1.125 3/8
degrees from parallel to A1C-139C 397.5(19)-400(37) 336.4(26/7)-397.5(18/1) .685-.743 8 7/8 3 3/4 1.312 3/8
cable run, specify catalog
A1C-144B 450(37)-500(37) 397.5(24/7)-477(18/1) .744-.814 8 7/8 3 3/4 1.312 3/8
A1C-161C-45.
A1C-144C 450(37)-500(37) 397.5(24/7)-477(18/1) .744-.814 8 7/8 3 3/4 1.312 3/8
A1C-146B 550(61)-556.5(37) 477(24/7)-477(30/7) .815-.883 8 7/8 3 3/4 1.312 3/8
A1C-146C 550(61)-556.5(37) 477(24/7)-477(30/7) .815-.883 8 7/8 3 3/4 1.312 3/8
A1C-148B 600(37)-650(91) 556.5(24/7)-556.5(30/7) .884-.953 8 1/2 4 1.500 3/8
A1C-148C 600(37)-650(91) 556.5(24/7)-556.5(30/7) .884-.953 8 1/2 4 1.500 3/8
A1C-152B 700(61)-817(61) 605(26/7)-715.5(30/19) .954-1.081 9 1/2 3 3/4 1.843 5/8
A1C-152C 700(61)-817(61) 605(26/7)-715.5(30/19) .954-1.081 9 1/2 3 3/4 1.843 5/8
A1C-152D 700(61)-817(61) 605(26/7)-715.5(30/19) .954-1.081 10 1/2 4 3/4 1.843 5/8
A1C-161B 900(37)-1000(61) 795(24/7)-874.5(54/7) 1.082-1.152 9 1/2 3 3/4 1.843 5/8
A1C-161C 900(37)-1000(61) 795(24/7)-874.5(54/7) 1.082-1.152 9 1/2 3 3/4 1.843 5/8
A1C-161D 900(37)-1000(61) 795(24/7)-874.5(54/7) 1.082-1.152 10 1/2 4 3/4 1.843 5/8
A1C-164B 1033.5(37)-1113(61) 900(54/7)-954(54/7) 1.153-1.216 9 1/2 3 3/4 2.125 3/4
A1C-164C 1033.5(37)-1113(61) 900(54/7)-954(54/7) 1.153-1.216 9 1/2 3 3/4 2.125 3/4
A1C-164D 1033.5(37)-1113(61) 900(54/7)-954(54/7) 1.153-1.216 10 1/2 4 3/4 2.125 3/4
A1C-165C 1192.5(61)-1272(61) 1033.5(54/7)-1113(54/19) 1.217-1.300 10 1/2 4 1/2 2.375 3/4
A1C-165D 1192.5(61)-1272(61) 1033.5(54/7)-1113(54/19) 1.217-1.300 11 1/2 5 1/2 2.375 3/4
45° A1C-167C 1400(91)-1510.5(61) 1272(45/7)-1351.5(54/19) 1.301-1.424 10 1/2 4 1/2 2.375 3/4
CABLE INSPECTION
A1C-167D 1400(91)-1510.5(61) 1272(45/7)-1351.5(54/19) 1.301-1.424 11 1/2 5 1/2 2.375 3/4
90° & WEEP HOLE A1C-168C 1590(61)-1700(127) 1351.5(54/19)-1510.5(45/7) 1.425-1.503 10 1/2 4 1/2 2.375 3/4
A1C-168D 1590(61)-1700(127) 1351.5(54/19)-1510.5(45/7) 1.425-1.503 11 1/2 5 1/2 2.375 3/4
A1C-169C 1750(127) 1510.5(54/19)-1590(54/19) 1.504-1.545 10 1/2 4 1/2 2.375 3/4
A1C-169D 1750(127) 1510.5(54/19)-1590(54/19) 1.504-1.545 11 1/2 5 1/2 2.375 3/4
A1C-170D 2000(91)(127) 1780(84/19) 1.546-1.659 12 6 2.937 3/4
A1C-171D 2250(91)(127) 2156(84/19) 1.660-1.762 12 6 2.937 3/4
A1C-172D 2500(127) 1.763-1.824 12 6 2.937 3/4
A1C-173D 3000(127) 1.825-1.996 12 6 2.937 3/4
A1C-174D 3500(127) 1.997-2.160 12 6 2.937 3/4
P
U
ALUMINUM SINGLE COMPRESSION SECTION
FITTINGS - DOUBLE CABLE TO FLAT PAD 16-1A-2B-A1C
ALUMINUM DOUBLE CABLE SINGLE COMPRESSION

CATALOG AAC ACSR DIMENSIONS DIE
CONDUCTOR PAD
NUMBER AWG or MCM AWG or MCM
DIAMETER A B REF. THICKNESS
W/PAD SIZE MIN. MAX MIN. MAX
A1C-152D-2C-* 700(61)-817(61) 605(26/7)-715.5(30/19) .954-1.081 10 1/2 4 3/4 1.843 3/4
A1C-161D-2C-* 900(37)-1000(61) 795(24/7)-874.5(54/7) 1.082-1.152 10 1/2 4 3/4 1.843 3/4
A1C-164D-2C-* 1033.5(37)-1113(61) 900(54/7)-954(54/7) 1.153-1.216 10 1/2 4 3/4 2.125 3/4
A1C-165D-2C-* 1192.5(61)-1272(61) 1033.5(54/7)-1113(54/19) 1.217-1.300 11 1/2 5 1/2 2.375 3/4
A1C-167D-2C-* 1400(91)-1510.5(61) 1272(45/7)-1351.5(54/19) 1.301-1.424 11 1/2 5 1/2 2.375 3/4
A1C-168D-2C-* 1590(61)-1700(127) 1351.5(54/19)-1510.5(45/7) 1.425-1.503 11 1/2 5 1/2 2.375 3/4
A1C-169D-2C-* 1750(127) 1510.5(54/19)-1590(54/19) 1.504-1.545 11 1/2 5 1/2 2.375 3/4
A1C-170D-2C-8 2000(91)(127) 1780(84/19) 1.546-1.659 12 6 2.937 1
A1C-171D-2C-8 2250(91)(127) 2156(84/19) 1.660-1.762 12 6 2.937 1
A1C-172D-2C-8 2500(127) 1.763-1.824 12 6 2.937 1
A1C-173D-2C-8 3000(127) 1.825-1.996 12 6 2.937 1
A1C-174D-2C-8 3500(127) 1.997-2.160 12 6 2.937 1
PLEASE SPECIFIY CABLE SPACING (*).

6” AND 8” ONLY (EX) A1C-152D-2C-8.
The A1C aluminum compression terminals
*170 AND UP 8” SPACING ONLY for connecting aluminum cable to a flat pad
utilizes a standard hex die and can be installed
with a single crimp. The crimping die sizes are
clearly marked for ease of installation.
For pads other than parallel to the cable bus
add the degree variation from parallel to the
catalog number.
45° Example: For a pad 45 degrees from parallel
to cable run, specify catalog A1C-161C-45.
90°
P
U
SECTION COPPER COMPRESSION TEE
16-2 FITTINGS CABLE TO FLAT PAD
COPPER TYPE-T
CATALOG CABLE SIZE DIE PAD
NUMBER AWG or MCM REF. THICKNESS
W/ PAD SIZE A
MIN. MAX
16-101B-T 2 6 0.64 1/4
16-102B-T 1/0 8 0.84 1/4
16-103B-T 2/0 8 0.84 1/4
16-104B-T 3/0 8 0.84 1/4
16-106B-T 4/0 8 0.84 1/4
16-106C-T 4/0 8 0.84 1/4
16-107B-T 250 8 0.84 1/4
16-107C-T 250 8 0.84 1/4
16-109B-T 300 8 0.84 1/4
16-109C-T 300 8 0.84 1/4
16-111B-T 350 8 0.84 1/4
The pure copper compression tee 16-111C-T 350 8 0.84 1/4

terminals for connecting copper 16-111D-T 350 8 0.84 1/4
cable bus to a perpendicular flat 16-113B-T 500 10 1.125 1/4
pad have the crimping die sizes 16-113C-T 500 10 1.125 1/4
clearly marked for ease of 16-113D-T 500 10 1.125 1/4
installation. 16-115B-T 750 11 1.5 3/8
16-115C-T 750 11 1.5 3/8
16-115D-T 750 11 1.5 1/2
16-117B-T 800 11 7/8 1.5 3/8
16-117C-T 800 11 7/8 1.5 3/8
16-117D-T 800 11 7/8 1.5 1/2
16-119B-T 1000 12 1.5 3/8
16-119C-T 1000 12 1.5 3/8
16-119D-T 1000 12 1.5 1/2
P
U
TEE FITTINGS CABLE TO FLAT PAD 16-2A
ALUMINUM TYPE-T
CATALOG AAC ACSR DIMENSIONS
CONDUCTOR DIE PAD
NUMBER AWG or MCM AWG OR MCM
DIAMETER REF. THICKNESS
W/ PAD SIZE MIN. MAX MIN. MAX A
16-124B-T 1/0 1/0 .326-.398 7 1/2 0.840 1/2
16-125B-T 2/0 2/0 .399-.447 7 1/2 0.840 1/2
16-128B-T 3/0 3/0 .448-.502 7 1/2 0.840 1/2
16-129B-T 4/0 4/0 .503-.563 7 1/2 0.840 1/2
16-130B-T 266.8-300 266.8(26/7) .564-.642 10 1.312 1/2 A
16-130C-T 266.8-300 266.8(26/7) .564-.642 10 1.312 3/4

16-134B-T 336.4(19)-350(37) 336.4(36/1)-336.4(18/1) .643-.684 10 1.312 1/2
16-134C-T 336.4(19)-350(37) 336.4(36/1)-336.4(18/1) .643-.684 10 1.312 3/4
16-139B-T 397.5(19)-400(37) 336.4(26/7)-397.5(18/1) .685-.743 10 1.312 1/2
16-139C-T 397.5(19)-400(37) 336.4(26/7)-397.5(18/1) .685-.743 10 1.312 3/4
16-144B-T 450(37)-500(37) 397.5(24/7)-477(18/1) .744-.814 10 1.312 1/2
16-144C-T 450(37)-500(37) 397.5(24/7)-477(18/1) .744-.814 10 1.312 3/4
16-146B-T 550(61)-556.5(37) 477(24/7)-477(30/7) .815-.883 10 1.312 1/2
16-146C-T 550(61)-556.5(37) 477(24/7)-477(30/7) .815-.883 10 1.312 3/4
16-148B-T 600(37)-650(91) 556.5(24/7)-556.5(30/7) .884-.953 12 1.500 1/2 The fab electrical
16-148C-T 600(37)-650(91) 556.5(24/7)-556.5(30/7) .884-.953 12 1.500 3/4 aluminum compression
16-152B-T 700(61)-817(61) 605(26/7)-715.5(30/19) .954-1.081 12 1.843 1/2 terminals for connecting
16-152C-T 700(61)-817(61) 605(26/7)-715.5(30/19) .954-1.081 12 1.843 3/4
aluminum cable bus to
16-152D-T 700(61)-817(61) 605(26/7)-715.5(30/19) .954-1.081 12 1.843 3/4
a perpendicular flat pad
16-161B-T 900(37)-1000(61) 795(24/7)-874.5(54/7) 1.082-1.152 12 1.843 1/2
16-161C-T 900(37)-1000(61) 795(24/7)-874.5(54/7) 1.082-1.152 12 1.843 3/4
have the crimping die
16-161D-T 900(37)-1000(61) 795(24/7)-874.5(54/7) 1.082-1.152 12 1.843 3/4
sizes clearly marked
16-164B-T 1033.5(37)-1113(61) 900(54/7)-954(54/7) 1.153-1.216 13 2.125 1/2 for ease of installation.
16-164C-T 1033.5(37)-1113(61) 900(54/7)-954(54/7) 1.153-1.216 13 2.125 3/4
16-164D-T 1033.5(37)-1113(61) 900(54/7)-954(54/7) 1.153-1.216 13 2.125 3/4
16-165C-T 1192.5(61)-1272(61) 1033.5(54/7)- 1113(54/19) 1.217-1.300 14 2.375 3/4
16-165D-T 1192.5(61)-1272(61) 1033.5(54/7)- 1113(54/19) 1.217-1.300 14 2.375 1
16-167C-T 1400(91)-1510.5(61) 1272(45/7)-1351.5(54/19) 1.301-1.424 14 2.375 3/4
16-167D-T 1400(91)-1510.5(61) 1272(45/7)-1351.5(54/19) 1.301-1.424 14 2.375 1
16-168C-T 1590(61)-1700(127) 1351.3(54/19)-1510.5(54/19) 1.425-1.503 14 2.375 3/4
16-168D-T 1590(61)-1700(127) 1351.3(54/19)-1510.5(54/19) 1.425-1.503 14 2.375 1
16-169C-T 1750(127) 1570.5(54/19)-1590(54/19) 1.504-1.545 14 2.375 3/4
16-169D-T 1750(127) 1570.5(54/19)-1590(54/19) 1.504-1.545 14 2.375 1
16-170D-T 2000(91)(127) 1780(84/19) 1.546-1.659 16 2.937 1
16-171D-T 2250(91)(127) 2156(84/19) 1.660-1.762 16 2.937 1
16-172D-T 2500(127) 1.763-1.824 16 2.937 1
16-173D-T 3000(127) 1.825-1.996 16 2.937 1
16-174D-T 3500(127) 1.997-2.160 16 2.937 1
P
U
SECTION COPPER COMPRESSION TEE
16-3 FITTINGS CABLE TO CABLE
COPPER TYPE CT
CABLE SIZE DIMENSIONS IN
CATALOG INCHES DIE
AWG or MCM
NUMBER REF
MIN MAX A B
101 2 5 3/4 1 1/2 .640
102 1/0 5 3/4 1 1/2 .840
The pure copper compression tee 103 2/0 6 2 .840
terminals for connecting copper cable 104 3/0 6 2 .840
main to a copper cable tap have the 106 4/0 6 1 1/2 1.000
crimping die sizes clearly marked for 107 250 6 1 1/2 1.000
ease of installation. 109 300 6 1/2 2 1/4 1.125
111 350 7 1/2 1 3/4 1.125
113 500 7 5/8 3 3/4 1.312
115 750 9 3 3/4 1.843
117 800 11 1/8 6 3/4 1.843
119 1000 14 9 1/4 1.843
121 1500 14 9 1/4 2.375
122 2000 14 9 1/4 2.937
To establish an item number define the run and tap

by the corresponding numbers above and add a
suffix “R“ for the run and “T“ for the tap.
For example, to depict a connector consisting of a
750MCM run and a 500MCM tap the part number
should be created as follows;
Find the corresponding values
115 = 750MCM
113 = 500MCM
Fill in the blanks
16-_ _ _R-_ _ _T
And you have a part number
16-115R-113T
P
U
TEE FITTINGS CABLE TO CABLE 16-3A
ALUMINUM TYPE CT
AAC SIZE ACSR SIZE DIMENSIONS
CATALOG CONDUCTOR IN INCHES DIE
AWG or MCM AWG or MCM
NUMBER DIAMETER REF
MIN MAX MIN MAX A B
124 1/0 1/0 .355-.398 7 1/2 3 7/8 .840
125 2/0 2/0 .414-.447 7 1/2 3 7/8 .840
128 3/0 3/0 .464-.502 7 1/2 3 7/8 .840
129 4/0 4/0 .522-.563 7 1/2 3 7/8 .840
130 266.8-300 266.8(26/7) .586-.642 10 5 1/16 1.312
134 336.4(19)-350(37) 336.4(36/1)-336.4(18/1) .666-.684 10 5 1/16 1.312
139 397.5(19)-400(37) 336.4(26/7)-397.5(18/1) .721-.743 10 5 1/16 1.312
144 450(37)-500(37) 397.5(24/7)-477(18/1) .772-.814 10 5 1/16 1.312
146 550(61)-556.5(37) 477(24/7)-477(30/7) .846-.883 10 5 1/16 1.312
148 600(37)-650(91) 556.5(24/7)-556.5(30/7) .879-.953 12 5 1/2 1.500
152 700(61)-817(61) 605(26/7)-715.5(30/19) .964-1.028 12 7 7/8 1.843
161 900(37)-1000(61) 795(24/7)-874.5(54/7) 1.092-1.152 12 7 7/8 1.843
164 1033.5(37)-1113(61) 900(54/7)-954(54/7) 1.162-1.216 13 9 1/8 2.125
165 1192.5(61)-1272(61) 1033.5(54/7)-1113(54/19) 1.246-1.300 14 10 5/8 2.375
167 1400(91)-1510.5(61) 1272(45/7)-1351.5(54/19) 1.345-1.424 14 10 5/8 2.375
168 1590(61)-1700(127) 1351.3(54/19)-1510.5(54/19) 1.424-1.506 14 10 5/8 2.375
169 1750(127) 1570.5(54/19)-1590(54/19) 1.506-1.545 14 10 5/8 2.375
170 2000(91)(127) 1780(84/19) 1.602-1.659 16 11 2.937
171 2250(91)(127) 2156(84/19) 1.729-1.762 16 11 2.937
172 2500(127) 1.824 16 11 2.937
173 3000(127) 1.996 16 11 2.937
174 3500(127) 2.160 16 11 2.937 The fab electrical
aluminum compression
To establish an item number define the run and tap by the corresponding numbers terminals for connecting
above and add a suffix “R“ for the run and “T“ for the tap. an aluminum cable main
For example, to depict a connector consisting of a 1590 ACSR run and a 795 to an aluminum cable
ACSR tap the part number should be created as follows; tap have the crimping
die sizes clearly marked
Find the corresponding values for ease of installation.
169 = 1590 ACSR
161 = 795 ACSR
Fill in the blanks
16-_ _ _R-_ _ _T
And you have a part number
16-169R-161T
P
U
COMPRESSION DIE INFORMATION
FOR COMPRESSION TERMINALS
Die
ALCOA BURNDY T&B KEARNEY HUSKIE
Ref.
0.640 73AH 243 52 5/8
0.840 74AH 249 76 .840 OR .849 HA60-28
1.000 75AH 251 1.00 HA60-29
1.125 76AH 490,347,316 96 1-1/8 HA60-30
1.312 20AH 327,317,426,300 106 1-5/16 HA60-20
1.500 24AH 318,261,608 125 1-1/2 HA60-21
1.625 27AH 301 K6027AH HA60-22
1.843 30AH 292,302,352,579 150 K6030AH HA60-23
2.125 34AH 422,575 160,161 2-1/8 HA60-24
2.375 38AH 478,728 189 2-3/8 HA100-26
2.750 44AH 2-3/4 HA100-36
2.937 48AH 250 2-15/16 HA100-38
P
U
ALUMINUM SWAGE CONNECTORS SECTION
CABLE TO FLAT PAD 16-SWC-1
ALUMINUM SWAGE CABLE CONNECTORS
AAC SIZE AWG ACSR SIZE AWG CONDUCTOR FITTING SWAGE
NUMBER
OR MCM MIN. MAX OR MCM MIN. MAX DIAMETER OD DIE
W/ PAD SIZE A B C
SWC100-124B 1/0 1/0 0.326-0.398 1 C100 6 1/2 2 3/8 5/16

SWC100-124C 1/0 1/0 0.326-0.398 1 C100 6 1/2 2 3/8 5/16
The Swage cable to flat
SWC100-125B 2/0 2/0 0.399-0.447 1 C100 6 1/2 2 3/8 5/16
pad connectors have
SWC100-125C 2/0 2/0 0.399-0.447 1 C100 6 1/2 2 3/8 5/16 the swage die sizes
SWC100-128B 3/0 3/0 0.448-0.502 1 C100 6 1/2 2 3/8 5/16 clearly marked for ease
SWC100-128C 3/0 3/0 0.448-0.502 1 C100 6 1/2 2 3/8 5/16 of installation. For pads
SWC100-129B 4/0 4/0 0.503-0.563 1 C100 6 1/2 2 3/8 5/16
other than parallel to
SWC100-129C 4/0 4/0 0.503-0.563 1 C100 6 1/2 2 3/8 5/16
the cable bus add the
SWC125-130B 266.8-300 266.8(26/7) 0.564-0.642 1.25 C125 8 3/4 3 7/8 3/8
SWC125-130C 266.8-300 266.8(26/7) 0.564-0.642 1.25 C125 8 3/4 3 7/8 3/8
degree variation from
SWC125-134B 336.4(19)-350(37) 336.4(36/1)-336.4(18/1) 0.643-0.684 1.25 C125 8 3/4 3 7/8 3/8
parallel to the catalog
SWC125-134C 336.4(19)-350(37) 336.4(36/1)-336.4(18/1) 0.643-0.684 1.25 C125 8 3/4 3 7/8 3/8 number.
SWC125-139B 397.5(19)-400(37) 336.4(26/7)-397.5(18/1) 0.685-0.743 1.25 C125 8 3/4 3 7/8 3/8
SWC125-139C 397.5(19)-400(37) 336.4(26/7)-397.5(18/1) 0.685-0.743 1.25 C125 8 3/4 3 7/8 3/8 Example: If a 45-de-
SWC150-144B 450(37)-500(37) 397.5(24/7)-477(18/1) 0.744-0.814 1.5 C150 8 3/4 3 7/8 7/16
gree, D pad were
SWC150-144C 450(37)-500(37) 397.5(24/7)-477(18/1) 0.744-0.814 1.5 C150 8 3/4 3 7/8 7/16
requested for 900(37)
SWC150-146B 550(61)-556.5(37) 477(24/7)-477(30/7) 0.815-0.883 1.5 C150 8 3/4 3 7/8 7/16
SWC150-146C 550(61)-556.5(37) 477(24/7)-477(30/7) 0.815-0.883 1.5 C150 8 3/4 3 7/8 7/16
AAC cable connectors,
SWC175-148C 600(37) - 715.5(61) 556.5(24/7) - 605(26/7) 0.884-0.976 1.75 C175 9 3/8 3 7/8 5/8
the corresponding cata-
SWC175-148D 600(37) - 715.5(61) 556.5(24/7) - 605(26/7) 0.884-0.976 1.75 C175 9 3/8 3 7/8 3/4 log number would be
SWC188-152C 750(37) -817(61) 605(30/7)-715.5(30/19) 0.977-1.081 1.875 C188 9 3/8 3 7/8 5/8 SWC200-161D-45.
SWC188-152D 750(37) -817(61) 605(30/7)-715.5(30/19) 0.977-1.081 1.875 C188 9 3/8 3 7/8 3/4
SWC200-161C 900(37)-1000(61) 795(24/7)-874.5(54/7) 1.082-1.152 2 C200 9 3/8 3 7/8 3/4
SWC200-161D 900(37)-1000(61) 795(24/7)-874.5(54/7) 1.082-1.152 2 C200 9 3/8 3 7/8 3/4
SWC200-164C 1033.5(37)-1113(61) 900(54/7)-954(54/7) 1.153-1.216 2 C200 9 3/8 3 7/8 3/4
SWC200-164D 1033.5(37)-1113(61) 900(54/7)-954(54/7) 1.153-1.216 2 C200 9 3/8 3 7/8 3/4
SWC225-165C 1192.5(61)-1272(61) 1033.5(54/7)-1113(54/19) 1.217-1.300 2.25 C225 9 3/4 3 7/8 3/4
SWC225-165D 1192.5(61)-1272(61) 1033.5(54/7)-1113(54/19) 1.217-1.300 2.25 C225 9 3/4 3 7/8 3/4 SWC200-161D
DIE C200
SWC225-167C 1400(91)-1510.5(61) 1272(45/7)-1351.5(54/19) 1.301-1.424 2.25 C225 9 3/4 3 7/8 3/4 900(37)-1000(61) AAC OR
SWC225-167D 1400(91)-1510.5(61) 1272(45/7)-1351.5(54/19) 1.301-1.424 2.25 C225 9 3/4 3 7/8 3/4 795(24/7)874.5(54/7) ACSR
SWC225-168C 1590(61)-1700(127) 1351.3(54/19)-1510.5(45/7) 1.425-1.503 2.25 C225 9 3/4 3 7/8 3/4

SWC225-168D 1590(61)-1700(127) 1351.3(54/19)-1510.5(45/7) 1.425-1.503 2.25 C225 9 3/4 3 7/8 3/4
SWC225-169C 1750(127) 1510.5(54/19)-1590(54/19) 1.504-1.545 2.25 C225 9 3/4 3 7/8 3/4
SWC225-169D 1750(127) 1510.5(54/19)-1590(54/19) 1.504-1.545 2.25 C225 9 3/4 3 7/8 3/4
SWC275-170C 2000(91)(127) 1780(84/19) 1.546-1.659 2.75 C275 10 3/8 4 1/4 7/8
SWC275-170D 2000(91)(127) 1780(84/19) 1.546-1.659 2.75 C275 10 3/8 4 1/4 7/8
SWC275-171C 2250(91)(127) 2156(84/19) 1.660-1.762 2.75 C275 10 3/8 4 1/4 7/8
SWC275-171D 2250(91)(127) 2156(84/19) 1.660-1.762 2.75 C275 10 3/8 4 1/4 7/8
SWC275-172C 2500(127) 1.763-1.824 2.75 C275 10 3/8 4 1/4 7/8
SWC275-172D 2500(127) 1.763-1.824 2.75 C275 10 3/8 4 1/4 7/8
SWC200-161D
C
DIE C200
900(37)-1000(61) AAC OR
795(24/7)874.5(54/7) ACSR
45°
CABLE INSPECTION &

90° WEEP HOLE
P
U
SECTION ALUMINUM SWAGE CONNECTORS
16-SWC-1-2B DOUBLE CABLE TO FLAT PAD
SWC200-161-2C-6
DIE C200
900(37)-1000(61) AAC OR
795(24/7)-847.5(54/7) ACSR
NOTE: AT LEAST 4” OF SPACING NEEDED

UP TO SWC225. SWC275 HAS A MINUMUM
OF 6” SPACING.
CATALOG CONDUCTOR FITTING SWAGE DIMENSIONS IN INCHES PAD
AAC ACSR
NUMBER DIAMETER OD DIE A B THICKNESS
SWC150-144D-2C 450(37)-500(37) 397.5(24/7)-477(18/1) 0.744-0.814 1.5 C150 9 1/4 4 1/2 1/2
SWC150-146D-2C 550(61)-556.5(37) 477(24/7)-477(30/7) 0.815-0.883 1.5 C150 9 1/4 4 1/2 1/2
SWC175-148D-2C 600(37) - 715.5(61) 556.5(24/7) - 605(26/7) 0.884-0.976 1.75 C175 9 1/4 4 1/2 3/4
SWC188-152D-2C 750(37) -817(61) 605(30/7)-715.5(30/19) 0.977-1.081 1.875 C188 10 3/4 4 1/2 3/4
SWC200-161D-2C 900(37)-1000(61) 795(24/7)-874.5(54/7) 1.082-1.152 2 C200 10 3/4 4 1/2 3/4
SWC200-164D-2C 1033.5(37)-1113(61) 900(54/7)-954(54/7) 1.153-1.216 2 C200 11 1/4 4 1/2 3/4
SWC225-165D-2C 1192.5(61)-1272(61) 1033.5(54/7)-1113(54/19) 1.217-1.300 2.25 C225 11 1/4 4 1/2 3/4
SWC225-167D-2C 1400(91)-1510.5(61) 1272(45/7)-1351.5(54/19) 1.301-1.424 2.25 C225 11 1/4 4 1/2 3/4
SWC225-168D-2C 1590(61)-1700(127) 1351.3(54/19)-1510.5(45/7) 1.425-1.503 2.25 C225 11 1/4 4 1/2 3/4
SWC225-169D-2C 1750(127) 1510.5(54/19)-1590(54/19) 1.504-1.545 2.25 C225 11 1/4 4 1/2 3/4
SWC275-170D-2C 2000(91)(127) 1780(84/19) 1.546-1.659 2.75 C275 12 3/4 4 1/2 7/8
SWC275-171D-2C 2250(91)(127) 2156(84/19) 1.660-1.762 2.75 C275 12 3/4 4 1/2 7/8
SWC275-172D-2C 2500(127) 1.763-1.824 2.75 C275 12 3/4 4 1/2 7/8
For connectors requiring different cable spacing

add the dimension suffix in inches stating what
center to center of the barrels is required.
For pads other than parallel to the cable bus add

the degree variation from parallel to the catalog
number. Also, please list able spacing in every
part number, as shown in the example.
Example: If a double cable Swage

terminal were requested for a 1033.5(37) AAC
cables, with a 6 inch spacing, and a 45-degree
pad. The corresponding catalog number would
be SWC200-164D-2C-6-45.
P
U
CABLE TO FLAT PAD 16-SWC-2
The Swage Split Tees for

connecting cable bus to a
perpendicular flat pad have
the crimping die sizes clearly
marked for ease of installation.
CATALOG AAC AWG ACSR AWG CONDUCTOR FITTING SWAGE DIMENSIONS IN INCHES PAD
NUMBER OR MCM MIN. MAX OR MCM MIN. MAX DIAMETER OD DIE THICKNESS
A B
SWC100-124B-T 1/0 1/0 0.326-0.399 1 C100 9 4 1/2 5/16

SWC100-125B-T 2/0 2/0 0.399-0.447 1 C100 9 4 1/2 5/16
SWC100-128B-T 3/0 3/0 0.448-0.502 1 C100 9 4 1/2 5/16
SWC100-129B-T 4/0 4/0 0.503-0.563 1 C100 9 4 1/2 5/16
SWC125-130B-T 266.8-300 266.8(26/7) 0.564-0.642 1.25 C125 9 4 3/4 3/8
SWC125-130C-T 266.8-300 266.8(26/7) 0.564-0.642 1.25 C125 9 4 3/4 3/8
SWC125-134B-T 336.4(19)-350(37) 336.4(36/1)-336.4(18/1) 0.643-0.684 1.25 C125 9 4 3/4 3/8
SWC125-134C-T 336.4(19)-350(37) 336.4(36/1)-336.4(18/1) 0.643-0.684 1.25 C125 9 4 3/4 3/8
SWC125-139B-T 397.5(19)-400(37) 336.4(26/7)-397.5(18/1) 0.685-0.743 1.25 C125 9 4 3/4 3/8
SWC125-139C-T 397.5(19)-400(37) 336.4(26/7)-397.5(18/1) 0.685-0.743 1.25 C125 9 4 3/4 3/8
SWC150-144B-T 450(37)-500(37) 397.5(24/7)-477(18/1) 0.744-0.814 1.5 C150 9 5 7/16
SWC150-144C-T 450(37)-500(37) 397.5(24/7)-477(18/1) 0.744-0.814 1.5 C150 9 5 7/16
SWC150-146B-T 550(61)-556.5(37) 477(24/7)-477(30/7) 0.815-0.883 1.5 C150 9 5 7/16
SWC150-146C-T 550(61)-556.5(37) 477(24/7)-477(30/7) 0.815-0.883 1.5 C150 9 5 7/16
SWC175-148B-T 600(37) - 715.5(61) 556.5(24/7) - 605(26/7) 0.884-0.976 1.75 C175 9 5 1/4 5/8
SWC175-148C-T 600(37) - 715.5(61) 556.5(24/7) - 605(26/7) 0.884-0.976 1.75 C175 9 5 1/4 5/8
SWC188-152B-T 750(37) -817(61) 605(30/7)-715.5(30/19) 0.977-1.081 1.875 C188 9 5 3/8 5/8
SWC188-152C-T 750(37) -817(61) 605(30/7)-715.5(30/19) 0.977-1.081 1.875 C188 9 5 3/8 5/8
SWC188-152D-T 750(37) -817(61) 605(30/7)-715.5(30/19) 0.977-1.081 1.875 C188 9 6 3/8 3/4
SWC200-161B-T 900(37)-1000(61) 795(24/7)-874.5(54/7) 1.082-1.152 2 C200 9 5 1/2 3/4
SWC200-161C-T 900(37)-1000(61) 795(24/7)-874.5(54/7) 1.082-1.152 2 C200 9 5 1/2 3/4
SWC200-161D-T 900(37)-1000(61) 795(24/7)-874.5(54/7) 1.082-1.152 2 C200 9 6 1/2 3/4
SWC200-164B-T 1033.5(37)-1113(61) 900(54/7)-954(54/7) 1.153-1.216 2 C200 9 5 1/2 3/4
SWC200-164C-T 1033.5(37)-1113(61) 900(54/7)-954(54/7) 1.153-1.216 2 C200 9 5 1/2 3/4
SWC200-164D-T 1033.5(37)-1113(61) 900(54/7)-954(54/7) 1.153-1.216 2 C200 9 6 1/2 3/4
SWC225-165C-T 1192.5(61)-1272(61) 1033.5(54/7)-1113(54/19) 1.217-1.300 2.25 C225 9 5 3/4 3/4
SWC225-165D-T 1192.5(61)-1272(61) 1033.5(54/7)-1113(54/19) 1.217-1.300 2.25 C225 9 6 3/4 3/4
SWC225-167C-T 1400(91)-1510.5(61) 1272(45/7)-1351.5(54/19) 1.301-1.424 2.25 C225 9 5 3/4 3/4
SWC225-167D-T 1400(91)-1510.5(61) 1272(45/7)-1351.5(54/19) 1.301-1.424 2.25 C225 9 6 3/4 3/4
SWC225-168C-T 1590(61)-1700(127) 1351.3(54/19)-1510.5(45/7) 1.425-1.503 2.25 C225 9 5 3/4 3/4
SWC225-168D-T 1590(61)-1700(127) 1351.3(54/19)-1510.5(45/7) 1.425-1.503 2.25 C225 9 6 3/4 3/4
SWC225-169C-T 1750(127) 1510.5(54/19)-1590(54/19) 1.504-1.545 2.25 C225 9 5 3/4 3/4
SWC225-169D-T 1750(127) 1510.5(54/19)-1590(54/19) 1.504-1.545 2.25 C225 9 6 3/4 3/4
SWC275-170D-T 2000(91)(127) 1780(84/19) 1.546-1.659 2.75 C275 9 7 1/4 7/8
SWC275-171D-T 2250(91)(127) 2156(84/19) 1.660-1.762 2.75 C275 9 7 1/4 7/8
SWC275-172D-T 2500(127) 1.763-1.824 2.75 C275 9 7 1/4 7/8
P
U
16-SWC-3 CABLE TO CABLE, TEE
AAC SIZE ACSR SIZE DIMENSIONS IN INCHES
CONDUCTOR CONDUCTOR
AWG or MCM AWG or MCM FITTING OD SWAGE DIE
IDENTIFIER NUMBER DIAMETER A B
MIN. MAX MIN. MAX
SWC100-124 1/0 1/0 0.326-0.398 1 9 5 C100
SWC100-125 2/0 2/0 0.399-0.447 1 9 5 C100
SWC100-128 3/0 3/0 0.448-0.502 1 9 5 C100
SWC100-129 4/0 4/0 0.503-0.563 1 9 5 C100
SWC125-130 266.8-300 266.8(26/7) 0.564-0.642 1.25 9 5 1/4 C125
SWC125-134 336.4(19)-350(37) 336.4(36/1)-336.4(18/1) 0.643-0.684 1.25 9 5 1/4 C125
SWC125-139 397.5(19)-400(37) 336.4(26/7)-397.5(18/1) 0.685-0.743 1.25 9 5 1/4 C125
SWC150-144 450(37)-500(37) 397.5(24/7)-477(18/1) 0.744-0.814 1.5 9 5 1/2 C150
SWC150-146 550(61)-556.5(37) 477(24/7)-477(30/7) 0.815-0.883 1.5 9 5 1/2 C150
SWC175-148 600(37) - 715.5(61) 556.5(24/7) - 605(26/7) 0.884-0.976 1.75 9 5 3/4 C175
SWC188-152 750(37) -817(61) 605(30/7)-715.5(30/19) 0.977-1.081 1.875 9 5 7/8 C188
SWC200-161 900(37)-1000(61) 795(24/7)-874.5(54/7) 1.082-1.152 2 9 6 C200
SWC200-164 1033.5(37)-1113(61) 900(54/7)-954(54/7) 1.153-1.216 2 9 6 C200
SWC225-165 1192.5(61)-1272(61) 1033.5(54/7)-1113(54/19) 1.217-1.300 2.25 9 6 1/4 C225
SWC225-167 1400(91)-1510.5(61) 1272(45/7)-1351.5(54/19) 1.301-1.424 2.25 9 6 1/4 C225
SWC225-168 1590(61)-1700(127) 1351.3(54/19)-1510.5(45/7) 1.425-1.503 2.25 9 6 1/4 C225
SWC225-169 1750(127) 1510.5(54/19)-1590(54/19) 1.504-1.545 2.25 9 6 1/4 C225
SWC275-170 2000(91)(127) 1780(84/19) 1.546-1.659 2.75 9 6 3/4 C275
SWC275-171 2250(91)(127) 2156(84/19) 1.660-1.762 2.75 9 6 3/4 C275
SWC275-172 2500(127) 1.763-1.824 2.75 9 6 3/4 C275
FILL IN THE BLANKS: SWC_ _ _ - _ _ _ R - SWC _ _ _ - _ _ _ T
STEP1: Use appropriate “run” conductor identifier

number, follow ID number with an “R”.
STEP2: Find the tap conductor size, place the

“tap” ID number after the “run” ID followed
by a “T” on the end.
Example: The corresponding catalog

number for a 1590 ACSR run to a 795 ACSR Tap would be
SWC225-169R-SWC200-161T
The corresponding die number for the run would be C225

and the corresponding die number for the tap would be
C200.
P
U
BRONZE GROUND CLAMPS CABLE SECTION
TO ROD OR PIPE 17-1
CABLE SIZE DIMENSIONS IN NUMBER

ROD PIPE SIZE
CATALOG INCHES
DIAM. IN AWG MCM OF
NUMBER IPS
INCHES MIN MAX A B Hardware CABLES
17-105 1/2 -3/4 1/4-3/8 8 4 1 1/8 7/8 3/8 3
17-106 1/2 - 3/4 1/4-3/8 4 2/0 1 1/8 7/8 3/8 2
17-107 1/2 - 3/4 1/4-3/8 2/0 250 1 1/8 7/8 3/8 1
17-109 7/8 1/2 8 4 1 1/4 1 3/8 3
17-110 7/8 1/2 4 2/0 1 1/4 1 3/8 2
17-111 7/8 1/2 2/0 250 1 1/4 1 3/8 1
17-113 1 3/4 8 4 1 1/8 1 1/8 3/8 3
17-114 1 3/4 4 2/0 1 1/8 1 1/8 3/8 3
17-115 1 3/4 2/0 250 1 1/8 1 1/8 3/8 1
17-116 1 3/4 250 500 1 1/8 1 1/8 3/8 1
17-117 1 1/4 1 8 4 1 1/8 1 1/4 3/8 3
17-118 1 1/4 1 4 2/0 1 1/8 1 1/4 3/8 3
17-119 1 1/4 1 2/0 250 1 1/8 1 1/4 3/8 1
17-120 1 1/4 1 250 500 1 1/8 1 1/4 3/8 1
17-121 1 1/2 1 1/4 8 4 1 1/8 1 3/4 3/8 3
17-122 1 1/2 1 1/4 4 2/0 1 1/8 1 3/4 3/8 3
17-123 1 1/2 1 1/4 2/0 250 1 1/4 1 3/4 3/8 3
17-124 1 1/2 1 1/4 250 500 1 1/8 1 3/4 3/8 2
17-125 2 1 1/2 8 4 1 1/8 2 3/8 3
17-126 2 1 1/2 4 2/0 1 1/8 2 3/8 3
The type GRC is a
17-127 2 1 1/2 2/0 250 1 1/8 2 3/8 3 corrosion-resistant
17-128 2 1 1/2 250 500 1 1/8 2 3/8 2 bronze ground clamp
17-129 2 1/2 2 8 4 7/8 2 1/2 3/8 3 for connecting one,
17-130 2 1/2 2 4 2/0 1 2 1/2 3/8 3 two, or three equal
17-131 2 1/2 2 2/0 250 1 1/4 2 1/2 3/8 3
cables clamped
parallel to the rod or
17-132 2 1/2 2 250 500 1 1/4 2 1/2 3/8 3
pipe. U-bolts, nuts,
17-133 2 1/2 2 500 750 1 1/4 2 1/2 3/8 2
and lockwashers are
17-134 3 2 1/2 8 4 1 1/8 3 3/8 3 stainless steel for
17-135 3 2 1/2 4 2/0 1 1/8 3 3/8 3 durability in the field.
17-136 3 2 1/2 2/0 250 1 1/8 3 3/8 3
17-137 3 2 1/2 250 500 1 1/4 3 3/8 3
17-138 3 2 1/2 500 750 1 1/4 3 3/8 3
17-139 3 2 1/2 750 1000 1 1/4 3 3/8 3

P
U
SECTION BRONZE GROUND CLAMPS CABLE
17-1 TO ROD OR PIPE, continued
ROD NUMBER
PIPE CABLE SIZE DIMENSIONS IN INCHES
CATALOG DIAM.
SIZE OF
NUMBER IN AWG MCM
IPS A B Hardware CABLES
INCHES MIN MAX
17-140 3 1/2 3 8 4 7/8 3 1/2 3/8 3
17-141 3 1/2 3 4 2/0 7/8 3 1/2 3/8 3
17-142 3 1/2 3 2/0 250 1 1/8 3 1/2 3/8 3
17-143 3 1/2 3 250 500 1 1/4 3 1/2 3/8 3
17-144 3 1/2 3 500 750 1 1/4 3 1/2 3/8 3
17-145 3 1/2 3 750 1000 1 1/4 3 1/2 3/8 3
17-146 4 3 1/2 8 4 1 1/8 4 3/8 3
17-147 4 3 1/2 4 2/0 1 1/8 4 3/8 3
17-148 4 3 1/2 2/0 250 1 1/8 4 3/8 3
17-149 4 3 1/2 250 500 1 1/4 4 3/8 3
17-150 4 3 1/2 500 750 1 1/4 4 3/8 3
17-151 4 3 1/2 750 1000 1 1/4 4 3/8 3
17-152 4 1/2 4 8 4 1 1/8 4 1/2 3/8 3
17-153 4 1/2 4 4 2/0 1 1/8 4 1/2 3/8 3
17-154 4 1/2 4 2/0 250 1 1/8 4 1/2 3/8 3
17-155 4 1/2 4 250 500 1 1/4 4 1/2 3/8 3
17-156 4 1/2 4 500 750 1 1/4 4 1/2 3/8 3
17-157 4 1/2 4 750 1000 1 1/4 4 1/2 3/8 3
17-152M 5 1/2 5 8 4 7/8 5 7/8 3/8 3
17-153M 5 1/2 5 4 2/0 7/8 5 7/8 3/8 3
17-154M 5 1/2 5 2/0 250 1 7/8 5 7/8 3/8 3
17-155M 5 1/2 5 250 500 1 1/4 5 7/8 3/8 3
17-156M 5 1/2 5 500 750 1 1/4 5 7/8 3/8 3
17-157M 5 1/2 5 750 1000 1 1/4 5 7/8 3/8 3
17-152N 6 1/2 6 8 4 7/8 6 3/4 3/8 3
17-153N 6 1/2 6 4 2/0 7/8 6 3/4 3/8 3
17-154N 6 1/2 6 2/0 250 1 1/8 6 3/4 3/8 3
17-155N 6 1/2 6 250 500 1 1/4 6 3/4 3/8 3
17-156N 6 1/2 6 500 750 1 1/4 6 3/4 3/8 3
17-157N 6 1/2 6 750 1000 1 1/4 6 3/4 3/8 3
P
U
BRONZE GROUND CLAMPS CABLE SECTION
TO FLAT SURFACE 17-2
 
 
GPA GPB
ONE CABLE TO FLAT SURFACE Made of corrosion-resistant bronze,

GPA CABLE SIZE DIMENSIONS IN SURFACE the GP series of tower ground
CATALOG AWG MCM clamps is designed for connecting
A B HARDWARE
NUMBER MIN MAX one or two cables to a flat surface.
17-158 8 4 1 3/8 2 1/4 3/8 Each clamp includes bolts, nuts,
17-159 4 300 1 3/8 2 1/4 1/2 and lockwashers of hot dip
17-160 250 500 1 1/2 2 1/4 1/2 galvanized steel.
17-161 500 750 1 1/2 2 1/4 1/2
For silicon bronze hardware simply
17-162 750 1000 1 1/2 2 1/4 1/2 add suffix (SB) to the part number
GPB TWO CABLES TO FLAT SURFACE (17-159-SB). Ground clamps come
standard with locks for easy single
17-163 8 4 1 5/8 2 1/4 3/8 wrench installation.
17-164 4 300 1 5/8 2 1/4 1/2
For ground clamps with no locks
17-165 250 500 2 3/4 2 1/4 1/2
add suffix (NL) to the part number
17-166 500 750 2 2 1/4 1/2 (17-159-NL).
17-167 750 1000 2 3/4 2 1/4 1/2
*Maximum flat bar thickness = 1/2” For plate thicknesses over 1/2”
add the plate thickness after the
part number.
EX: 17-164(1”plate)
P
U
SECTION BRONZE GROUND CLAMPS
17-3 BRAID TO ROD OR PIPE
CATALOG ROD DIA. PIPE DIMENSIONS IN INCHES

NUMBER IN INCHES SIZE IPS A B Hardware
17-174 7/8 or 1 1/2 7/8 1 3/8
17-175 7/8 or 1 3/4 7/8 1 1/8 3/8
17-176 1 1/4 1 1 1/8 1 1/4 3/8
17-177 1 1/2 1 1/4 1 1/2 1 3/4 3/8
17-178 2 1 1/2 1 5/8 2 3/8
17-179 2 1/2 2 1 1/2 2 1/2 3/8
17-180 3 2 1/2 2 3 3/8
17-181 3 1/2 3 2 3 1/2 3/8
17-182 4 3 1/2 1 1/2 4 3/8
17-183 4 1/2 4 1 1/2 4 1/2 3/8
17-183M 5 1/2 5 1 1/2 5 7/8 3/8
17-183N 6 1/2 6 1 1/2 6 3/4 3/8
A corrosion-resistant bronze ground clamp for connecting a

braid to a rod or pipe, the type GCB also includes U-bolts,
nuts, and lockwashers made of stainless steel to enhance
its durability in the field.
P
U
BRONZE GROUND CLAMPS SECTION
CABLE TO SQUARE POST 17-4
CATALOG CABLE SIZE DIMENSIONS IN INCHES

POST SIZE
NUMBER AWG MIN MCM MAX A Hardware
17-184 2 1/4 x 2 1/4 8 4 1 1/8 3/8
17-185 2 1/4 x 2 1/4 4 2/0 1 1/8 3/8
17-186 2 1/4 x 2 1/4 2/0 250 1 1/8 3/8
17-187 2 1/4 x 2 1/4 250 500 1 1/2 3/8
17-188 2 1/4 x 2 1/4 500 750 1 1/2 3/8
17-189 2 1/4 x 2 1/4 750 1000 1 1/2 3/8
17-190 2 1/2 x 2 1/2 8 4 1 1/8 3/8
17-191 2 1/2 x 2 1/2 4 2/0 1 1/8 3/8
17-192 2 1/2 x 2 1/2 2/0 250 1 1/8 3/8
17-193 2 1/2 x 2 1/2 250 500 1 1/2 3/8
17-194 2 1/2 x 2 1/2 500 750 1 1/2 3/8
17-195 2 1/2 x 2 1/2 750 1000 1 1/2 3/8
A dependable, corrosion-resistant bronze ground

clamp, the type GCS connects one, two, or three
equal cables clamped parallel to a square post.
Stainless steel U-bolts, nuts, and lockwashers
enhance its durability in the field.
P
U
SECTION BRONZE GROUND CLAMPS CABLE TO ROD
17-5 OR PIPE, PARALLEL OR PERPENDICULAR
DIMENSIONS IN
ROD PIPE CABLE SIZE
CATALOG INCHES
DIAM. IN SIZE
NUMBER AWG MCM
INCHES IPS A B Hardware
MIN MAX
17-200 1/2 -3/4 1/4-3/8 8 4 1 3/8 7/8 3/8
17-201 1/2 - 3/4 1/4-3/8 4 2/0 1 3/8 7/8 3/8
17-202 1/2 - 3/4 1/4-3/8 2/0 250 1 1/2 7/8 3/8
17-203 1/2 - 3/4 1/4-3/8 250 500 1 1/2 7/8 3/8
17-204 7/8 1/2 8 4 1 1/2 1 3/8
17-205 7/8 1/2 4 2/0 1 1/2 1 3/8
17-206 7/8 1/2 2/0 250 1 1/2 1 3/8
17-208 1 3/4 8 4 1 1/2 1 1/8 3/8
  17-209 1 3/4 4 2/0 1 1/2 1 1/8 3/8
17-210 1 3/4 2/0 250 1 7/8 1 1/8 3/8
17-212 1 1/4 1 8 4 1 1/2 1 1/4 3/8
17-213 1 1/4 1 4 2/0 1 1/2 1 1/4 3/8
17-214 1 1/4 1 2/0 250 1 1/2 1 1/4 3/8
17-216 1 1/2 1 1/4 8 4 1 3/8 1 3/4 3/8
17-217 1 1/2 1 1/4 4 2/0 1 3/4 1 3/4 3/8
17-218 1 1/2 1 1/4 2/0 250 1 3/4 1 3/4 3/8
  17-221 2 1 1/2 8 4 1 3/8 2 3/8
17-222 2 1 1/2 4 2/0 1 3/4 2 3/8
The type GCX is a cast 17-223 2 1 1/2 2/0 250 1 3/4 2 3/8
electrical bronze grounding 17-224 2 1 1/2 250 500 1 3/4 2 3/8
clamp whose purpose is to 17-226 2 1/2 2 8 4 1 3/4 2 1/2 3/8
connect one cable, either 17-227 2 1/2 2 4 2/0 1 3/4 2 1/2 3/8
parallel or perpendicular, 17-228 2 1/2 2 2/0 250 1 3/4 2 1/2 3/8
to a ground rod or pipe. 17-229 2 1/2 2 250 500 3 1/2 2 1/2 3/8
For resistance to corrosion, 17-230 2 1/2 2 500 750 2 3/4 2 1/2 3/8
all clamping hardware is 17-231 3 2 1/2 8 4 1 3/4 3 3/8
stainless steel.
P
U
BRONZE GROUND CLAMPS CABLE TO ROD OR SECTION
PIPE PARALLEL OR PERPENDICULAR, continued 17-5
DIMENSIONS IN
CABLE SIZE
CATALOG ROD DIAM. PIPE SIZE INCHES
NUMBER IN INCHES IPS AWG MCM
A B Hardware
MIN MAX
17-232 3 2 1/2 4 2/0 1 1/2 3 3/8
17-233 3 2 1/2 2/0 250 1 3/4 3 3/8
17-234 3 2 1/2 250 500 3 1/2 3 3/8
17-235 3 2 1/2 500 750 1 3/4 3 3/8
17-236 3 2 1/2 750 1000 1 3/4 3 3/8
17-237 3 1/2 3 8 4 1 3/4 3 1/2 3/8
17-238 3 1/2 3 4 2/0 1 3/4 3 1/2 3/8
17-239 3 1/2 3 2/0 250 1 7/8 3 1/2 3/8
17-240 3 1/2 3 250 500 1 3/4 3 1/2 3/8
17-241 3 1/2 3 500 750 1 3/4 3 1/2 3/8
17-242 3 1/2 3 750 1000 1 3/4 3 1/2 3/8
17-243 4 3 1/2 8 4 1 3/4 4 3/8  
17-244 4 3 1/2 4 2/0 1 7/8 4 3/8

17-245 4 3 1/2 2/0 250 1 7/8 4 3/8
17-246 4 3 1/2 250 500 1 7/8 4 3/8
17-247 4 3 1/2 500 750 1 7/8 4 3/8
17-248 4 3 1/2 750 1000 1 7/8 4 3/8
17-249 4 1/2 4 8 4 1 3/4 4 1/2 3/8
17-250 4 1/2 4 4 2/0 1 5/8 4 1/2 3/8
17-251 4 1/2 4 2/0 250 1 7/8 4 1/2 3/8
17-252 4 1/2 4 250 500 1 7/8 4 1/2 3/8  
17-253 4 1/2 4 500 750 1 7/8 4 1/2 3/8

17-254 4 1/2 4 750 1000 1 7/8 4 1/2 3/8
17-255 5 1/2 5 8 4 1 3/4 5 7/8 3/8
17-256 5 1/2 5 4 2/0 1 3/4 5 7/8 3/8
17-257 5 1/2 5 2/0 250 1 7/8 5 7/8 3/8
17-258 5 1/2 5 250 500 1 7/8 5 7/8 3/8
17-259 5 1/2 5 500 750 1 7/8 5 7/8 3/8
17-260 5 1/2 5 750 1000 1 7/8 5 7/8 3/8
17-261 6 1/2 6 8 4 1 3/4 6 3/4 3/8
17-262 6 1/2 6 4 2/0 1 3/4 6 3/4 3/8
17-263 6 1/2 6 2/0 250 1 7/8 6 3/4 3/8
17-264 6 1/2 6 250 500 1 7/8 6 3/4 3/8
17-265 6 1/2 6 500 750 1 7/8 6 3/4 3/8
17-266 6 1/2 6 750 1000 1 7/8 6 3/4 3/8
P
U
SECTION BRONZE GROUND CLAMPS MULTIPLE CABLE TO
17-5.5 ROD OR PIPE PARALLEL OR PERPENDICULAR

CATALOG ROD DIAM. PIPE SIZE
NUMBER IN INCHES IPS AWG MCM
A B Hardware
MIN MAX
17-267* 1/2 - 3/4 1/4-3/8 4 2/0 1 3/4 7/8 3/8
17-268* 1/2 - 3/4 1/4-3/8 2/0 250 1 3/4 7/8 3/8
17-269** 1 1/4 1 4 2/0 2 1/4 1 1/4 3/8
17-270** 1 1/4 1 2/0 250 2 1/4 1 1/4 3/8
17-271** 1 1/2 1 1/4 4 2/0 2 1/4 1 3/4 3/8
17-272** 1 1/2 1 1/4 2/0 250 2 1/4 1 3/4 3/8
17-273 2 1 1/2 4 2/0 2 1/2 2 3/8
17-274 2 1 1/2 2/0 250 2 1/2 2 3/8
17-275 2 1/2 2 4 2/0 2 3/4 2 1/2 3/8
17-276 2 1/2 2 2/0 250 2 3/4 2 1/2 3/8
17-277 3 2 1/2 4 2/0 3 1/4 3 3/8
17-278 3 2 1/2 2/0 250 3 1/4 3 3/8
17-279 3 1/2 3 4 2/0 3 1/2 3 1/2 3/8
17-280 3 1/2 3 2/0 250 3 1/2 3 1/2 3/8
17-281 4 3 1/2 4 2/0 3 1/2 4 3/8
17-282 4 3 1/2 2/0 250 3 1/2 4 3/8
* One cable in the parallel position or two cables in the perpendicular position.
** Two cables in the parallel position or two cables in the perpendicular position.
The cast bronze grounding clamp serves as a multi-purpose tool, for up to three copper cables
parallel or two perpendicular to IPS or OD post. Clamps are supplied with stainless steel U-bolts
and silicon bronze lock washers and nuts.
Single Conductor Position
P
U
BRONZE GROUNDING CABLE RUN SECTION
TO GROUNDING ROD 17-6
3/4"
A

CATALOG
NUMBER AWG MCM
A B HARDWARE
MIN MAX
17-1201 8 600 6 2 1/4 3/8
17-1202 4/0 1000 6 3 1/2
17-1203 1000 1500 6 3 1/4 1/2
17-1204 1500 2000 6 3 1/3 1/2
Manufactured of a copper alloy for high conductivity and natural

resistance to stress, the type BCGS conveniently joins a ground-
ing stud to a copper cable. Bolt heads are captivated to facilitate
single-wrench installation
P
U
SECTION ALUMINUM GROUNDING
17-6A CABLE RUN TO GROUNDING STUD
B
C
FAULT RATING: 5H = 47kA @ 15 CYCLES X/R=30

ALUMINUM MAIN ACSR MAIN DIMENSIONS IN INCHES
CATALOG
NUMBER AWG MCM AWG MCM
A B C K
MIN MAX MIN MAX
17-1301 4 954 4 795 5 3 3/8 3/4 1/2
17-1302 900 1272 715.5 1113 6 3 1/2 3/4 1/2
17-1303 1272 1590 1113 1272 6 4 5/8 3/4 5/8
17-1304 1590 2000 1272 1590 6 4 3/8 3/4 5/8
FAULT RATING: 6H = 55kA @ 15 CYCLES X/R=30
17-1305 4 954 4 795 6 1/2 3 3/8 1 1/4 1/2
17-1306 900 1272 715.5 1113 6 1/2 3 1/2 1 1/4 1/2
17-1307 1272 1590 1113 1272 6 1/2 4 5/8 1 1/4 5/8
17-1308 1590 2000 1272 1590 6 1/2 4 3/8 1 1/4 5/8
Manufactured of a strong, lightweight aluminum alloy, the type ACGS

conveniently joins a grounding stud to an aluminum cable. For clamping
strength and resistance to corrosion, bolts, nuts, and lockwashers are high
tensile aluminum. Bolt heads are captivated to facilitate single-wrench
installation
P
U
BRONZE BOLTED GROUNDING SECTION
CONNECTOR, PIPE TO STUD 17-7

CATALOG ROD
MAIN
NUMBER DIAMETER A B C K
IPS
17-1401 1/2 3/4 6 2 7/8 3 3/8 3/8
17-1402 3/4 3/4 6 2 7/8 3 3/8 1/2
17-1403 1 3/4 6 3 1/8 3 7/8 1/2
17-1404 1 1/4 3/4 6 3 1/8 4 3/8 1/2
17-1405 1 1/2 3/4 6 3 1/8 4 3/8 1/2
17-1406 2 3/4 6 3 1/8 5 1/8 1/2
17-1407 2 1/2 3/4 6 4 6 1/8 1/2
17-1408 3 3/4 6 4 7 5/8
17-1409 3 1/2 3/4 6 3 3/4 7 1/2 5/8
17-1410 4 3/4 6 4 5/8 8 1/2 5/8
17-1411 4 1/2 3/4 6 4 3/4 9 5/8
17-1412 5 3/4 6 5 9 1/2 5/8
17-1413 6 3/4 6 6 11 5/8
Manufactured of a copper alloy for high conductivity and natural resistance

to stress, the type BPGS conveniently joins a grounding stud to a copper
pipe. For clamping strength and resistance to corrosion, bolts, nuts, and
lockwashers are silicon bronze. Bolt heads are captivated to facilitate
single-wrench installation
P
U
SECTION ALUMINUM BOLTED GROUNDING
17-7A CONNECTOR, PIPE TO STUD

CATALOG ROD
MAIN
NUMBER DIAMETER
IPS A B C K
17-1501 1/2 3/4 6 2 7/8 3 3/8 3/8
17-1502 3/4 3/4 6 2 7/8 3 3/8 1/2
17-1503 1 3/4 6 3 1/8 3 7/8 1/2
17-1504 1 1/4 3/4 6 3 1/8 4 3/8 1/2
17-1505 1 1/2 3/4 6 3 1/8 4 3/8 1/2
17-1506 2 3/4 6 3 1/8 5 1/8 1/2
17-1507 2 1/2 3/4 6 4 6 1/8 1/2
17-1508 3 3/4 6 4 7 5/8
17-1509 3 1/2 3/4 6 3 3/4 7 1/2 5/8
17-1510 4 3/4 6 4 1/2 8 1/2 5/8
17-1511 4 1/2 3/4 6 4 3/4 9 5/8
17-1512 5 3/4 6 5 9 5/8 5/8
17-1513 6 3/4 6 5 7/8 11 5/8
Manufactured of a strong, lightweight aluminum alloy, the type APGS

conveniently joins a grounding stud to an aluminum pipe. For clamping
strength and resistance to corrosion, bolts, nuts, and lockwashers are high
tensile aluminum. Bolt heads are captivated to facilitate single-wrench
installation
P
U
ALUMINUM GROUNDING TERMINAL, SECTION
FLAT PAD TO STUD 17-8
Manufactured of a strong,
lightweight aluminum alloy,
the type APGS conveniently
joins a grounding stud to an
aluminum pad.


CATALOG NUMBER PAD PAD SIZE

2HP-GS B 2” X 3” (2 HOLE)
4HP-GS C 3” X 3” (4 HOLE)
4X4-GS D 4” X 4” (4 HOLE)
P
U
ALUMINUM WELDMENT CONNECTORS SECTION
PIPE TO FLAT PAD 18-1
SIDE FORMED ANGLED 90 DEGREE CENTER FORMED
(STANDARD) (AS REQUIRED) (USE SUFFIX -90) (USE SUFFIX -CF)
EXTERNAL
(USE SUFFIX -E)
INTERNAL
(USE SUFFIX -I)
PIPE DIMENSIONS IN
CATALOG PAD INCHES PAD
MAIN
NUMBER STYLE THICKNESS 
IPS A B C 
18-101 1/2 B 4 5/8 1 1/4 15/16 3/8
18-102 1/2 C 4 5/8 1 1/4 15/16 3/8
18-103 1/2 D 5 5/8 1 1/4 15/16 3/8 
18-104 3/4 B 4 3/4 1 1/4 1 3/8
18-105 3/4 C 4 1/8 1 1 3/8

18-106 3/4 D 4 1/2 1 1 3/8

18-107 1 B 5 1 3/4 1 1/8 3/8
18-108 1 C 5 1 3/8 1 1/8 3/8
18-109 1 D 6 1 3/8 1 1/8 3/8 
18-110 1 1/4 B 5 1/8 1 1/2 1 1/4 3/8
18-111 1 1/4 C 4 1/2 1 3/8 1 1/4 3/8
18-112 1 1/4 D 5 1/2 1 3/8 1 1/4 3/8
18-113 1 1/2 B 5 1/4 1 7/8 1 1/2 1/2 Cast of a lightweight and corrosion-
18-114 1 1/2 C 5 2 1 1/2 1/2 resistant aluminum alloy, the type
18-115 1 1/2 D 5 7/8 1 7/8 1 1/2 1/2 WAT secures a pipe to a flat bar bus
18-116 2 B 5 1/2 2 1 3/4 1/2 more permanently and economically
18-117 2 C 5 7/8 1 7/8 1 3/4 1/2 than other terminal connectors.
18-118 2 D 6 2 1 3/4 1/2 Side formed NEMA pads are standard.
18-119 2 1/2 B 6 2 3/8 2 3/8 1/2
18-120 2 1/2 C 5 3/4 2 3/8 2 3/8 1/2 Any special tongue features will be
18-121 2 1/2 D 6 7/8 2 3/8 2 3/8 1/2 readily provided if designated by the
18-122 3 B 6 2 3/4 2 3/8 5/8 addition of a suffix to the catalog number.
18-123 3 C 6 2 3/4 2 3/8 5/8
Example: if a center-formed tongue
18-124 3 D 7 1/8 2 5/8 2 3/8 5/8
were requested for catalog number
18-125 3 1/2 B 6 1/8 2 5/8 2 5/8 3/4
18-101E, that number should appear
18-126 3 1/2 C 6 1/8 2 5/8 2 5/8 3/4
18-127 3 1/2 D 7 1/8 2 5/8 2 5/8 3/4
on the order as 18-101-CFE.
18-128 4 B 6 5/8 3 1/8 2 7/8 3/4 Similarly, a 45 degree tongue for the
18-129 4 C 6 5/8 3 1/8 2 7/8 3/4 same catalog number should be written
18-130 4 D 7 5/8 3 1/8 2 7/8 3/4
18-101-E-45.
18-131 4 1/2 B 6 5/8 3 1/8 2 7/8 3/4
18-132 4 1/2 C 6 5/8 3 1/8 2 7/8 3/4
18-133 4 1/2 D 7 5/8 3 1/8 2 7/8 3/4
18-134 5 B 6 5/8 3 1/8 3 3/8 1
18-135 5 C 6 5/8 3 1/8 3 3/8 1
18-136 5 D 7 5/8 3 1/8 3 3/8 1
18-137 6 B 7 3 3/4 4 1 1/8 FOR EHPS (SCH80) INTERNAL
18-138 6 C 7 3/4 4 1/8 4 1 1/8 PIPE FITTINGS USE SUFFIX
18-139 6 D 8 3/4 4 1/8 4 1 1/8 (H). EX: 18-139H-E
P
U
SECTION ALUMINUM WELDMENT EXPANSION
18-1E-EX CONNECTORS PIPE TO FLAT PAD
 


90 DEGREE
(USE SUFFIX EX90)
PIPE DIMENSIONS IN
CATALOG PAD INCHES PAD
With a high conductivity MAIN
NUMBER STYLE THICKNESS
IPS A B C
aluminum alloy, the type
WATEX secures a tube to 18-101E-EX 1/2 B 4 5/8 1 1/4 15/16 3/8
flat bar bus with a flexible 18-102E-EX 1/2 C 4 5/8 1 1/4 15/16 3/8
18-103E-EX 1/2 D 5 5/8 1 1/4 15/16 3/8
connection.
18-104E-EX 3/4 B 4 3/4 1 1/4 1 3/8
Center formed NEMA pads 18-105E-EX 3/4 C 4 1/8 1 1 3/8
are standard. 18-106E-EX 3/4 D 4 1/2 1 1 3/8
18-107E-EX 1 B 5 1 3/4 1 1/8 3/8
Aluminum pad surface is
18-108E-EX 1 C 5 1 3/8 1 1/8 3/8
coated with contacts sealant
18-109E-EX 1 D 6 1 3/8 1 1/8 3/8
and bolted to laminated shunt
18-110E-EX 1 1/4 B 5 1/8 1 1/2 1 1/4 3/8
at factory. Preformed copper 18-111E-EX 1 1/4 C 4 1/2 1 3/8 1 1/4 3/8
laminated shunt has tin 18-112E-EX 1 1/4 D 5 1/2 1 3/8 1 1/4 3/8
plated contacts. 18-113E-EX 1 1/2 B 5 1/4 1 7/8 1 1/2 1/2
Use suffix EX90 for 90 18-114E-EX 1 1/2 C 5 2 1 1/2 1/2
degree expansion terminal 18-115E-EX 1 1/2 D 5 7/8 1 7/8 1 1/2 1/2
18-116E-EX 2 B 5 1/2 2 1 3/4 1/2
as illustrated.
18-117E-EX 2 C 5 7/8 2 1/2 1 3/4 1/2
18-118E-EX 2 D 6 2 1 3/4 1/2
18-119E-EX 2 1/2 B 6 2 3/8 2 3/8 1/2
18-120E-EX 2 1/2 C 5 3/4 2 3/8 2 3/8 1/2
18-121E-EX 2 1/2 D 6 7/8 2 3/8 2 3/8 1/2
18-123E-EX 3 C 6 2 3/4 2 3/8 5/8
18-124E-EX 3 D 7 1/8 2 5/8 2 3/8 5/8
18-126E-EX 3 1/2 C 6 1/8 2 5/8 2 5/8 3/4
18-127E-EX 3 1/2 D 7 1/8 2 5/8 2 5/8 3/4
18-130E-EX 4 D 7 5/8 3 1/8 2 7/8 3/4
18-133E-EX 4 1/2 D 7 5/8 3 1/8 2 7/8 3/4
18-136E-EX 5 D 7 5/8 3 1/8 3 3/8 1
18-139E-EX 6 D 8 1/4 3 3/4 4 1 1/8
P
U
ALUMINUM WELDMENT SECTION
PIPE TO PIPE TEE CONNECTORS 18-2



NUMBER MAIN TAP A B C
18-140 1/2 1/2 1 3/4 1 2
18-141 3/4 1/2 1 13/16 1 2
18-142 3/4 3/4 1 13/16 1 2 1/4
18-143 1 1/2 2 1 2
18-144 1 3/4 2 1 2 1/4
18-145 1 1 2 1 3/8 2 1/2
18-146 1 1/4 1/2 2 1/4 1 2
18-147 1 1/4 3/4 2 1/4 1 2 1/4
18-148 1 1/4 1 2 1/2 1 1/4 2 1/2
18-149 1 1/4 1 1/4 2 1/4 1 3/8 2 3/4
18-150 1 1/2 1/2 2 3/8 1 2
18-151 1 1/2 3/4 2 3/8 1 2 1/4
18-152 1 1/2 1 2 5/8 1 1/4 2 1/2
For a secure and reliable
18-153 1 1/2 1 1/4 2 5/8 1 1/4 3 connection between a pipe
18-154 1 1/2 1 1/2 2 3/8 3 1/8 1 3/4 main and a tubular tap at a
18-155 2 1/2 2 1/2 1 2
90 degree angle, the type
18-156 2 3/4 1 3/8 1 2 1/4
18-157 2 1 1 7/8 1 3/8 2 1/2 TTW makes a particularly
18-158 2 1 1/4 2 5/8 1 1/2 3 3/8 effective and economical
18-159 2 1 1/2 2 1 3 choice.
18-160 2 2 1 7/8 1 3 1/2
18-161 2 1/2 1/2 2 7/8 1 2 It is cast of a lightweight
18-162 2 1/2 3/4 1 7/8 1 2 1/2
and corrosion-resistant
18-163 2 1/2 1 1 7/8 1 3/8 2 1/2
18-164 2 1/2 1 1/4 2 3/4 1 1/4 3 aluminum alloy.
18-165 2 1/2 1 1/2 1 3/4 7/8 3 1/4
18-166 2 1/2 2 1 7/8 1 3 1/2
18-167 2 1/2 2 1/2 3 2 1/4 4 1/2
18-168 3 1/2 3 1/4 1 2
18-169 3 3/4 3 1/4 1 2 1/4
18-170 3 1 1 7/8 1 3/8 2 1/2
18-171 3 1 1/4 3 3/8 1 1/4 3
18-172 3 1 1/2 2 1/4 3 3/8 1 1/2
18-173 3 2 3 1/4 1 3/4 3 7/8
18-174 3 2 1/2 3 1/8 2 1/8 4 1/4
18-175 3 3 4 1/4 2 1/4 5 7/8
18-176 3 1/2 1/2 3 1/2 1 2
18-177 3 1/2 3/4 3 1/2 1 2 1/4
18-178 3 1/2 1 1 7/8 1 1/4 2 5/8
18-179 3 1/2 1 1/4 3 5/8 1 1/4 3
18-180 3 1/2 1 1/2 4 1 1/2 3 1/4
18-181 3 1/2 2 3 1/4 1 3/4 3 7/8
18-182 3 1/2 2 1/2 3 1/8 2 1/8 4 1/4
18-183 3 1/2 3 4 5/8 2 1/4 5
18-184 3 1/2 3 1/2 5 2 1/2 5 1/2
P
U
SECTION ALUMINUM WELDMENT PIPE
18-2 TO PIPE TEE CONNECTORS, continued

IPS MAIN IPS TAP
NUMBER A B C
18-185 4 1/2 3 3/4 1 2
18-186 4 3/4 3 3/4 1 2 1/2
18-187 4 1 2 3/4 1 3
18-188 4 1 1/4 3 1/2 1 1/4 3
18-189 4 1 1/2 1 3/4 7/8 3 1/4
18-190 4 2 2 3/8 1 3/4 3 1/2
18-191 4 2 1/2 4 2 4 1/4
18-192 4 3 3 3/4 2 1/4 5
18-193 4 3 1/2 4 1/2 2 1/2 5 1/2
18-194 4 4 4 1/2 2 3/8 6
18-195 4 1/2 1/2 3 3/4 1 2
18-196 4 1/2 3/4 3 3/4 1 2 1/4
18-197 4 1/2 1 4 1 1/4 2 1/2
18-198 4 1/2 1 1/4 4 1 1/4 3
18-199 4 1/2 1 1/2 4 1/4 1 1/2 3 1/4
18-200 4 1/2 2 4 1/4 1 3/4 3 1/2
 18-201 4 1/2 2 1/2 4 3/8 2 4 1/4

18-202 4 1/2 3 4 1/2 2 1/4 5
18-203 4 1/2 3 1/2 5 1/2 2 1/2 5 1/2
18-204 4 1/2 4 5 1/2 2 1/2 6
 18-205 4 1/2 4 1/2 5 3/4 2 3/4 6 3/4
18-206 5 1/2 4 3/8 1 2
18-207 5 3/4 4 3/8 1 2 1/4
18-208 5 1 4 1/2 1 1/4 2 1/2
18-209 5 1 1/4 4 5/8 1 1/4 3
 18-210 5 1 1/2 4 7/8 1 1/2 3 1/4

18-211 5 2 5 1/8 1 3/4 3 1/2
18-212 5 2 1/2 5 1/8 2 5 1/4
18-213 5 3 5 1/4 2 1/4 5
 18-214 5 3 1/2 5 1/2 2 1/2 5 1/2
18-215 5 4 4 1/2 2 1/2 6
18-216 5 4 1/2 5 3/4 2 3/4 6 3/4
18-217 5 5 5 3/4 2 1/2 81/2
18-218 6 1/2 4 3/4 1 2
18-219 6 3/4 4 3/4 1 2 1/4
18-220 6 1 5 1 1/4 2 1/2
18-221 6 1 1/4 5 1 1/4 3
18-222 6 1 1/2 5 1/4 1 1/2 3 1/4
18-223 6 2 5 1/2 1 3 1/2
18-224 6 2 1/2 5 1/2 2 4 1/4
18-225 6 3 5 3/4 2 1/4 5
18-226 6 3 1/2 6 2 1/2 5 1/2
18-227 6 4 6 2 1/2 6
18-228 6 4 1/2 6 1/4 2 3/4 6 3/4
18-229 6 5 7 2 3/8 8
18-230 6 6 6 1/2 2 1/2 8 1/2
P
U
PIPE TO ANGLE PIPE, TEE 18-3




IPS MAIN IPS TAP
NUMBER A B
18-231 1/2 1/2 1 1/2 2
18-232 3/4 1/2 1 1/2 2
18-233 3/4 3/4 1 1/2 2 1/4
18-234 1 1/2 1 1/2 2 1/4
18-235 1 3/4 1 1/2 2 1/4
18-236 1 1 1 3/4 3
18-237 1 1/4 1/2 1 1/2 2
18-238 1 1/4 3/4 1 1/2 2 1/4 A reliable and economical connector
18-239 1 1/4 1 1 3/4 2 1/2 for joining a pipe main to a tap whose
18-240 1 1/4 1 1/4 1 3/4 3
18-241 1 1/2 1/2 1 1/2 2
angle varies from the perpendicular,
18-242 1 1/2 3/4 1 1/2 2 1/4 the type TTWA cast of a lightweight
18-243 1 1/2 1 1 3/4 2 1/2 and corrosion-resistant aluminum
18-244 1 1/2 1 1/4 1 3/4 3
18-245 1 1/2 1 1/2 1 3/4 3 1/4
alloy makes a permanent connection.
18-246 2 1/2 1 1/2 2 It can be used in self-supporting A-
18-247 2 3/4 1 1/2 2 1/4 frame structures.
18-248 2 1 2 3/4 2 5/8
18-249 2 1 1/4 3 3 In ordering the type TTWA, the varying
18-250 2 1 1/2 1 1/2 3 1/4
18-251 2 2 3 3/8 3 3/4
angle must be designated in a suffix
18-252 2 1/2 1/2 1 1/2 2 added to the catalog number to insure
18-253 2 1/2 3/4 1 1/2 2 1/4 maximum efficiency in filling the order.
18-254 2 1/2 1 3 5/8 2 1/2
18-255 2 1/2 1 1/4 1 3/4 3 Example: a 15 degree angle tap for
18-256 2 1/2 1 1/2 3 1/2 4 1/8
18-257 2 1/2 2 3 1/4 3 3/4
catalog number 18-231, should be
18-258 2 1/2 2 1/2 3 1/4 4 3/8 written as 18-231-15.
18-259 3 1/2 1 1/2 6
18-260 3 3/4 1 1/2 2
18-261 3 1 1 3/4 2 1/4
18-262 3 1 1/4 2 1/2 3
18-263 3 1 1/2 1 1/2 1 3/4
18-264 3 2 2 2
18-265 3 2 1/2 4 5/8 5 5/8
18-266 3 3 4 3/4 5 7/8
18-267 3 1/2 1/2 1/2 1 1/2
18-268 3 1/2 3/4 3/4 1 1/2
18-269 3 1/2 1 1 1 3/4
18-270 3 1/2 1 1/4 1 1/4 1 3/4
18-271 3 1/2 1 1/2 3 1/4 4 3/8
18-272 3 1/2 2 3 3/4 4
18-273 3 1/2 2 1/2 2 1/2 2 1/4
18-274 3 1/2 3 3 2 1/2
18-275 3 1/2 3 1/2 5 1/2 6 1/4

P
U
SECTION ALUMINUM WELDMENT PIPE TO
18-3 ANGLE PIPE, TEE, continued

IPS MAIN IPS TAP
NUMBER A B
18-277 4 3/4 3/4 1 1/2
18-278 4 1 1 1 3/4
18-279 4 1 1/4 1 1/4 3
18-280 4 1 1/2 1 1/2 3 1/4
18-281 4 2 3 1/4 3 1/8
18-282 4 2 1/2 4 1/4 5 3/8
18-283 4 3 5 1/2 5 7/8
 18-284 4 3 1/2 2 1/2 5 3/4


18-285 4 4 5 1/2 7 1/4
18-286 4 1/2 1/2 1 2
18-287 4 1/2 3/4 1 2 1/4
18-288 4 1/2 1 1 1/4 2 1/2
18-289 4 1/2 1 1/4 1 1/4 3
18-290 4 1/2 1 1/2 1 1/2 3 1/4
18-291 4 1/2 2 1 3/4 3 1/2
18-292 4 1/2 2 1/2 2 4 1/4
18-293 4 1/2 3 2 1/4 5
 18-294 4 1/2 3 1/2 2 1/2 5 1/2
18-295 4 1/2 4 2 1/2 6
18-296 4 1/2 4 1/2 2 3/4 6 3/4
18-297 5 1/2 1 2
18-298 5 3/4 1 2 1/4
18-299 5 1 1 1/4 2 1/2
 18-300 5 1 1/4 1 1/4 3
18-301 5 1 1/2 1 1/2 3 1/4
18-302 5 2 5 1/4 4
18-303 5 2 1/2 5 1/2 5
18-304 5 3 5 1/4 5 3/4
18-305 5 3 1/2 5 1/4 5 3/4
18-306 5 4 5 3/8 6 3/8
18-307 5 4 1/2 5 1/4 6 1/2
18-308 5 5 2 3/4 8
18-309 6 1/2 1 2
18-310 6 3/4 1 2 1/4
18-311 6 1 1 1/4 2 1/2
18-312 6 1 1/4 1 1/4 3
18-313 6 1 1/2 1 1/2 3 1/4
18-314 6 2 1 3/4 3 1/2
18-315 6 2 1/2 2 4 1/4
18-316 6 3 5 1/8 5 7/8
18-317 6 3 1/2 2 1/2 5 1/2
18-318 6 4 5 7 3/8
18-319 6 4 1/2 2 3/4 7 1/4
18-320 6 5 6 5/8 8 1/2
18-321 6 6 3 8 1/2
P
U
PIPE TO ANGLE PIPE, VEE 18-4
DIMENSIONS
CATALOG IN INCHES
IPS MAIN IPS TAP
NUMBER
A B
18-322 1/2 1/2 3/4 3 1/4
18-323 3/4 1/2 3/4 3 1/4
18-324 3/4 3/4 3/4 3 1/4
18-325 1 1/2 3/4 3 1/4
18-326 1 3/4 3/4 3 1/4
18-327 1 1 1 3 1/2
18-328 1 1/4 1/2 3/4 3 1/4 For joining a pipe main to taps whose
18-329 1 1/4 3/4 3/4 3 1/4
18-330 1 1/4 1 1 3 1/2 angles vary from the perpendicular,
18-331 1 1/4 1 1/4 7/8 3 3/8 the type TTWV offers economy and
18-332 1 1/2 1/2 3/4 3 1/4 performance. Cast of a high conductivity,
18-333 1 1/2 3/4 3/4 3 1/4
lightweight, and corrosion-resistant
18-334 1 1/2 1 1 3 1/2
18-335 1 1/2 1 1/4 7/8 3 3/8 aluminum alloy, it can be used in
18-336 1 1/2 1 1/2 1 3/8 4 self-supporting A-frame structures.
18-337 2 1/2 3/4 3 1/4
18-338 2 3/4 3/4 3 1/4 To insure maximum efficiency in filling
18-339 2 1 1 1/4 3 the order, the varying angles should be
18-340 2 1 1/4 7/8 3 3/8 designated by means of a suffix added
18-341 2 1 1/2 1 1/2 3 1/4 to the catalog number.
18-342 2 2 1 3/4 3
18-343 2 1/2 1/2 1 1/4 3 Example: a 15 degree angle tap for
18-344 2 1/2 3/4 1 1/4 3 catalog number 18-322, for should
18-345 2 1/2 1 1 1/4 3
18-346 2 1/2 1 1/4 1 1/4 3 be ordered as 18-322-15.
18-347 2 1/2 1 1/2 1 3/4 3 1/4
18-348 2 1/2 2 1 1/2 3 3/4
 
18-349 2 1/2 2 1/2 1 1/8 3 3/4
18-350 3 1/2 3/4 3 1/4
18-351 3 3/4 3/4 3 1/4
18-352 3 1 1 3 1/2 
18-353 3 1 1/4 1 1/4 3 
18-354 3 1 1/2 1 3/8 3 3/8
18-355 3 2 2 1/4 4 5/8  
18-356 3 2 1/2 1 3/8 3 5/8 


18-357 3 3 2 5
18-358 3 1/2 1/2 3/4 3 1/4
18-359 3 1/2 3/4 3/4 3 1/4
18-360 3 1/2 1 1 3 1/2
18-361 3 1/2 1 1/4 1 1/4 3 3/4
18-362 3 1/2 1 1/2 1 3/8 4
18-363 3 1/2 2 1 5/8 3 5/8
18-364 3 1/2 2 1/2 1 3/4 4 5/8
18-365 3 1/2 3 2 6
18-366 3 1/2 3 1/2 2 1/8 4 3/4
18-367 4 1/2 3/4 3 1/4
18-368 4 3/4 3/4 3 1/4
18-369 4 1 1 3 1/2
P
U
SECTION ALUMINUM WELDMENT PIPE TO
18-4 ANGLE PIPE, VEE, continued

IPS MAIN IPS TAP
NUMBER A B
18-370 4 1 1/4 1 1/4 3 3/4
18-371 4 1 1/2 1 3/8 4
18-372 4 2 2 4
18-373 4 2 1/2 1 5/8 4 3/4
18-374 4 3 2 1/4 6
18-375 4 3 1/2 1 7/8 6 1/4
18-376 4 4 3 3/8 5 7/8
18-377 4 1/2 1/2 3/4 3 1/4
 
18-378 4 1/2 3/4 3/4 3 1/4
18-379 4 1/2 1 1 3 1/2
18-380 4 1/2 1 1/4 1 1/4 3 3/4
 18-381 4 1/2 1 1/2 1 3/8 4
18-382 4 1/2 2 2 1/4 4 5/8

18-383 4 1/2 2 1/2 1 3/4 5 1/8
18-384 4 1/2 3 2 6
  18-385 4 1/2 3 1/2 1 7/8 6 1/4

 18-386 4 1/2 4 2 6

18-387 4 1/2 4 1/2 2 1/4 7 1/2
18-388 5 1/2 3/4 3 1/4
18-389 5 3/4 3/4 3 1/4
  18-390 5 1 1 3 1/2
18-391 5 1 1/4 1 1/4 3 3/4
18-392 5 1 1/2 1 3/8 4
18-393 5 2 1 5/8 4 5/8
18-394 5 2 1/2 1 7/8 6
 18-395 5 3 2 1/4 6
18-396 5 3 1/2 2 5 5/8
18-397 5 4 2 3/4 5 1/2
18-398 5 4 1/2 3 7 1/8
18-399 5 5 3 7 1/8
18-400 6 1/2 3/4 3 1/4
18-401 6 3/4 3/4 3 1/4
18-402 6 1 1 3 1/2
18-403 6 1 1/4 1 1/4 3 3/4
18-404 6 1 1/2 1 3/8 4
18-405 6 2 2 4 1/4
18-406 6 2 1/2 2 4 1/4
18-407 6 3 3 5 5/8
18-408 6 3 1/2 1 7/8 6 1/4
18-409 6 4 2 7/8 6 1/8
18-410 6 4 1/2 2 1/4 7 1/2
18-411 6 5 2 1/2 8
18-412 6 6 3 1/4 8 5/8
P
U
ALUMINUM WELDMENT PIPE TO SECTION
PIPE, Y, PERPENDICULAR MAIN 18-5

IPS MAIN IPS TAP
NUMBER A B
18-413 1/2 1/2 7/8 7/8
18-414 3/4 1/2 7/8 7/8
18-415 3/4 3/4 7/8 7/8
18-416 1 1/2 1 7/8
18-417 1 3/4 1 7/8
18-418 1 1 1 1/8 1
18-419 1 1/4 1/2 1 1/8 7/8
18-420 1 1/4 3/4 1 1/8 7/8
18-421 1 1/4 1 1 1/8 1
18-422 1 1/4 1 1/4 1 1/2 1 1/8
18-423 1 1/2 1/2 1 1/2 7/8
18-424 1 1/2 3/4 1 1/2 7/8
18-425 1 1/2 1 1 1/2 1
18-426 1 1/2 1 1/4 1 1/2 1 1/8
18-427 1 1/2 1 1/2 1 1/2 1 1/2
18-428 2 1/2 2 1/8 7/8
18-429 2 3/4 2 1/8 7/8 If an economical and permanent
18-430 2 1 2 1/8 1 union is required between a pipe
18-431 2 1 1/4 2 1/8 1 1/8 main and taps whose angles
18-432 2 1 1/2 2 1/8 1 1/2
18-433 2 2 2 1/8 2 1/8
vary from the perpendicular, the
18-434 2 1/2 1/2 2 1/8 7/8 type TTWP proves an efficient
18-435 2 1/2 3/4 2 1/8 7/8 connector.
18-436 2 1/2 1 2 1/8 1
18-437 2 1/2 1 1/4 2 1/8 1 1/8 Durable and lightweight because
18-438 2 1/2 1 1/2 2 1/8 1 1/2 of its high conductivity aluminum
18-439 2 1/2 2 2 1/8 2 1/8 alloy, it can be especially useful in
18-440 2 1/2 2 1/2 2 1/8 1 3/4
18-441 3 1/2 2 7/8
self-supporting A-frame structures.
18-442 3 3/4 2 7/8 Varying angles should be noted
18-443 3 1 2 1
18-444 3 1 1/4 2 1 1/8
by means of a suffix added to the
18-445 3 1 1/2 2 1 1/2 catalog number.
18-446 3 2 2 2 1/8
18-447 3 2 1/2 2 2 3/4
Example: a 15 degree angle
18-448 3 3 2 2 tap for catalog number 18-413,
18-449 3 1/2 1/2 2 1/8 7/8 should be written on the order
18-450 3 1/2 3/4 2 1/8 7/8 as 18-413-15.
18-451 3 1/2 1 2 1/8 1
18-452 3 1/2 1 1/4 2 1/8 1 1/8
18-453 3 1/2 1 1/2 2 1/8 1 1/2
18-454 3 1/2 2 2 1/8 2 1/8
18-455 3 1/2 2 1/2 2 1/8 2 1/8
18-456 3 1/2 3 2 1/8 2 

18-457 3 1/2 3 1/2 2 1/8 2 1/8
18-458 4 1/2 2 1/4 7/8
18-459 4 3/4 2 1/4 7/8

18-460 4 1 2 1/4 1
 


P
U
SECTION ALUMINUM WELDMENT PIPE TO PIPE,
18-5 Y, PERPENDICULAR MAIN, continued



 



NUMBER MAIN TAP A B
18-461 4 1 1/4 2 1/4 1 1/8
18-462 4 1 1/2 2 1/4 1 1/8
18-463 4 2 2 1/4 2 1/8
18-464 4 2 1/2 2 1/4 2 1/8
18-465 4 3 2 1/4 2
18-466 4 3 1/2 2 1/4 2 1/8
18-467 4 4 2 1/4 2 1/4
18-468 4 1/2 1/2 2 1/4 7/8
18-469 4 1/2 3/4 2 1/4 7/8
18-470 4 1/2 1 2 1/4 1
18-471 4 1/2 1 1/4 2 1/4 1 1/8
18-472 4 1/2 1 1/2 2 1/4 1 1/2
18-473 4 1/2 2 2 1/4 2 1/8
18-474 4 1/2 2 1/2 2 1/4 2 1/8
18-475 4 1/2 3 2 1/4 2
18-476 4 1/2 3 1/2 2 1/4 2 1/8
18-477 4 1/2 4 2 1/4 2 1/4
18-478 4 1/2 4 1/2 2 1/4 2 1/4
18-479 5 1/2 2 1/2 7/8
18-480 5 3/4 2 1/2 7/8
18-481 5 1 2 1/2 1
18-482 5 1 1/4 2 1/2 1 1/8
18-483 5 1 1/2 2 1/2 1 1/2
18-484 5 2 2 1/2 2 1/8
18-485 5 2 1/2 2 1/2 2 1/8
18-486 5 3 2 1/2 2
18-487 5 3 1/2 2 1/2 2 1/8
18-488 5 4 2 1/2 2 1/4
18-489 5 4 1/2 2 1/2 2 1/2
18-490 5 5 2 1/2 2 1/2
18-491 6 1/2 3 1/8 7/8
18-492 6 3/4 3 1/8 7/8
18-493 6 1 3 1/8 1
18-494 6 1 1/4 3 1/8 1 1/8
18-495 6 1 1/2 3 1/8 1 1/2
18-496 6 2 3 1/8 2 1/8
18-497 6 2 1/2 3 1/8 2
18-498 6 3 3 1/8 2 1/8
18-499 6 3 1/2 3 1/8 2 1/8
18-500 6 4 3 1/8 2 1/4
18-501 6 4 1/2 3 1/8 2 1/4
18-502 6 5 3 1/8 2 1/2
18-503 6 6 3 1/8 3 1/8
P
U
PIPE TO PIPE COUPLER-REDUCER 18-6
CATALOG NUMBER IPS IPS DIMENSIONS IN INCHES

SPS SCH 80 MAIN TAP A B C
18-504 18-505 1/2 1/2 2 1/2 1 1/4 1 1/4
18-506 18-507 3/4 1/2 3 1 3/4 1 1/4
18-508 18-509 3/4 3/4 3 1/2 1 3/4 1 3/4
18-510 18-511 1 1/2 3 1/2 2 1/4 1 1/4
18-512 18-513 1 3/4 4 2 1/4 1 3/4
18-514 18-515 1 1 4 1/2 2 1/4 2 1/4
18-516 18-517 1 1/4 1/2 4 1/4 3 1 1/4
18-518 18-519 1 1/4 3/4 4 3/4 3 1 3/4
18-520 18-521 1 1/4 1 5 1/4 3 2 1/4
18-522 18-523 1 1/4 1 1/4 6 3 3
18-524 18-525 1 1/2 3/4 4 7/8 3 1/8 1 3/4
18-526 18-527 1 1/2 1 5 7/16 3 3/16 2 1/4
18-528 18-529 1 1/2 1 1/4 6 3/16 3 3/16 3
18-530 18-531 1 1/2 1 1/2 6 1/4 3 1/8 3 1/8
18-532 18-533 2 1 5 13/16 3 9/16 2 1/4
18-534 18-535 2 1 1/4 6 9/16 3 9/16 3
18-536 18-537 2 1 1/2 6 3/4 3 9/16 3 3/16
18-538 18-539 2 2 7 3 1/2 3 1/2
 
18-540 18-541 2 1/2 1 1/4 6 7/16 3 7/16 3
18-542 18-543 2 1/2 1 1/2 6 5/8 3 7/16 3 3/16 
18-544 18-545 2 1/2 2 7 11/16 4 3/16 3 1/2
18-546 18-547 2 1/2 2 1/2 9 3/8 4 3/16 4 3/16
18-548 18-559 3 1 1/2 6 5/16 3 1/8 3 3/16
18-550 18-551 3 2 6 3 3
18-552 18-553 3 2 1/2 6 1/2 3 1/8 3 3/8
18-554 18-555 3 3 6 1/4 3 1/8 3 1/8 Cast of a lightweight and corrosion-
18-556 18-557 3 1/2 2 8 11/16 5 1/8 3 9/16 resistant aluminum alloy, the type
18-558 18-569 3 1/2 2 1/2 8 3/16 5 1/8 3 3/16 WCT and type WCTH make reliable,
18-560 18-561 3 1/2 3 8 1/4 5 1/8 3 1/8
18-562 18-563 3 1/2 3 1/2 10 1/4 5 1/8 5 1/8
economical, and permanent
18-564 18-565 4 2 10 6 7/16 3 9/16 connections between tubes of the
18-566 18-567 4 2 1/2 9 7/8 6 7/16 3 7/16 same or different sizes joined end
18-568 18-579 4 3 9 9/16 6 7/16 3 1/8 on end.
18-570 18-571 4 3 1/2 11 9/16 6 7/16 5 1/8
18-572 18-573 4 4 12 7/8 6 7/16 6 7/16
18-574 18-575 4 1/2 2 9 9/16 6 3 9/16
18-576 18-577 4 1/2 2 1/2 9 9/16 6 3 9/16
18-578 18-589 4 1/2 3 9 1/8 6 3 1/8
18-580 18-581 4 1/2 3 1/2 11 1/8 6 5 1/8
18-582 18-583 4 1/2 4 12 6 6
18-584 18-585 4 1/2 4 1/2 12 6 6
18-586 18-587 5 2 1/2 11 3/16 8 3 3/16
18-588 18-599 5 3 11 3/8 8 3 1/8
18-590 18-591 5 3 1/2 13 1/8 8 5 1/8
18-592 18-593 5 4 14 7/16 8 6 7/16
18-594 18-595 5 4 1/2 16 8 8
18-596 18-597 5 5 16 4 3/4 4 3/4
18-598 18-699 6 3 12 1/8 9 3 1/8
18-600 18-601 6 3 1/2 14 1/8 9 5 1/8
18-602 18-603 6 4 15 7/8 9 6 7/8
18-604 18-605 6 4 1/2 17 9 8
18-606 18-607 6 5 17 9 8
18-608 18-609 6 6 18 9 9
P
U
SECTION ALUMINUM WELDMENT CONNECTORS
18-7 PIPE TO FLAT PAD TEE
 
For a secure and reliable connection DIMENSIONS

between a pipe bus and a flat pad CATALOG PIPE PAD IN INCHES
to which a choice of fittings may be NUMBER SIZE IPS STYLE
A B C
bolted, the ype WTD tee connector
is a particularly adaptable, efficient 18-622-WR 1-3 B 3 7/8 2 1/2
and economical choice. It is cast of 18-623-WR 1-3 C 3 1/2 3 3/4
a lightweight and corrosion-resistant
aluminum alloy for dependability and 18-624-WR 1-3 D 5 4 3/4
durability in the field. 18-640-WR 3-6 B 3 7/8 2 3/4
18-641-WR 3-6 C 3 3/8 3 3/4
18-642-WR 3-6 D 4 7/8 4 1 1/8
18-622-90-WR 1-3 B 3 7/8 2 5/8
18-623-90-WR 1-3 C 3 5/8 3 5/8
18-624-90-WR 1-3 D 4 5/8 4 1
18-640-90-WR 3-6 B 4 1/8 2 5/8
18-641-90-WR 3-6 C 3 3/4 3 5/8

Wide Range 90 degree 18-642-90-WR 3-6 D 5 4 1
(not for use in full current load
conditions with 4-6 in IPS) FOR 90 DEGREE USE SUFFIX -90
For 90 degree applications that

require a full current load a full
saddle weld is required, please
indicate the actual pipe size.
Example: a 4” pipe to a 90 degree
4x4 pad would appear as a
18-642-90(4”IPS)
P
U
PIPE TO PIPE, ELBOW 18-8

* Specify Angle

CATALOG DIMEN-
PIPE
NUMBER SIONS
SIZE
SCH IN INCHES 
SCH 80 IPS
40 A B

18-649-* 18-649H-* 1/2 1 1/8 2 7/8
18-650-* 18-650H-* 3/4 1 1/8 2 7/8 A rugged connector for linking pipes of the same
size at an angle with permanence and reliability,
18-651-* 18-651H-* 1 1 1/8 2 7/8 the economical type WTE depends on its high
18-652-* 18-652H-* 1 1/4 2 3 3/4 conductivity, lightweight aluminum alloy casting for
resistance to corrosion and stress in the field.
18-653-* 18-653H-* 1 1/2 1 1/2 3 1/2
Varying angles should be properly designated as a
18-654-* 18-654H-* 2 2 1/4 5 suffix to the catalog number.
18-655-* 18-655H-* 2 1/2 2 1/4 5 1/4 Example: if a 45 degree angle were
18-656-* 18-656H-* 3 3 7 requested for catalog number 18-649, the number
should be written on the order as 18-649-45.
18-657-* 18-657H-* 3 1/2 1 1/2 6
18-658-* 18-658H-* 4 4 1/2 9 1/4
18-659-* 18-659H-* 4 1/2 2 1/2 8
18-660-* 18-660H-* 5 2 1/2 9
18-661-* 18-661H-* 6 2 1/2 11
For applications requiring odd

CATALOG PIPE SIZE MAX DIMESIONS-INCHES
or undefined angles the multi
NUMBER IPS KV A(MAX) B C D angle coupler (MAC) series
1 1/2 130
provides a convenient and
flexible solution.
2 115
2 1/2 105
18-MAC-5 230 5 1 1/4 5/16
3 90
3 1/2 80
4 60
3 125
B
3 1/2 120
18-MAC-8 4 345 110 8 2 3/4 7/16

5 95
C
6 75
3 140
A
3 1/2 135
FIELD WELD
18-MAC-12 4 500 130 12 2 3/4 3/8

5 120
6 100
P
U
SECTION ALUMINUM WELDMENT
18-9 CONNECTORS CABLE TO FLAT PAD
CONDUCTOR HOLE DIMENSIONS

CATALOG PAD CABLE SIZE
DIAMETER DIA.IN IN INCHES
NUMBER STYLE
AAC ACSR IN INCHES INCHES A B C
18-662 B 1/0 1/0 .355-.398 7/16 3 3/4 3/4 3/8
18-663 C 1/0 1/0 .355-.398 7/16 3 3/4 3/4 3/8
18-664 D 1/0 1/0 .355-.398 7/16 4 3/4 3/4 3/8

A reliable and economi- 18-665 B 2/0 2/0 .399-.447 1/2 3 3/4 3/4 3/8
cal connector for joining 18-666 C 2/0 2/0 .399-.447 1/2 3 3/4 3/4 3/8
a cable to a flat bar bus,
18-667 D 2/0 2/0 .399-.447 1/2 4 3/4 3/4 3/8
the type WCP cast of a
lightweight and corrosion 18-668 B 3/0 3/0 .448-.502 9/16 3 7/8 7/8 1/2
resistant aluminum alloy 18-669 C 3/0 3/0 .448-.502 9/16 3 7/8 7/8 1/2
makes a permanent 18-670 D 3/0 3/0 .448-.502 9/16 4 7/8 7/8 1/2
connection. Side formed
18-671 B 4/0 4/0 .503-.563 5/8 5 1 3/4 1/2
NEMA pads are standard.
18-672 C 4/0 4/0 .503-.563 5/8 5 1 3/4 1/2
Any special tongue
18-673 D 4/0 4/0 .503-.563 5/8 6 1 3/4 1/2
features will be readily
supplied provided the 18-674 B 250-300 266.8(26/7) .564-.642 11/16 4 9/16 1 1/4 1/2
catalog number is 18-675 C 250-300 266.8(26/7) .564-.642 11/16 4 9/16 1 1/4 1/2
followed by the proper 18-676 D 250-300 266.8(26/7) .564-.642 11/16 5 9/16 1 1/4 1/2
suffix.
336.4(19)- 336.4(36/1)-
Example: a 45 degree 18-680 B .643-.721 3/4 4 9/16 1 1/4 1/2
397.5(37) 336.4(26/7)
tongue for catalog
336.4(19)- 336.4(36/1)-
number 18-662, for 18-681 C
397.5(37) 336.4(26/7)
.643-.721 3/4 4 9/16 1 1/4 1/2
instance, should be
ordered as 18-662-45. 336.4(19)- 336.4(36/1)-
18-682 D .643-.721 3/4 5 3/8 1 1/4 1/2
397.5(37) 336.4(26/7)
 400(37)- 397.5(18/1)-
18-683 B .722-.795 7/8 4 3/4 1 1/2 5/8
477(37) 397.5(24/7)

400(37)- 397.5(18/1)-
18-684 C .722.795 7/8 5 1/8 1 3/4 1/2
477(37) 397.5(24/7)
400(37)- 397.5(18/1)-
18-685 D .722-.795 7/8 5 3/4 1 3/4 5/8
477(37) 397.5(24/7)
 500(61)- 477(24/7)-
18-686 B .776-.883 15/16 5 1/8 1 5/8 1/2
556.5(37) 477(30/7)
500(61)- 477(24/7)-
18-687 C .776-.883 15/16 5 1/8 1 5/8 1/2
556.5(37) 477(30/7)
500(61)- 477(24/7)-
18-688 D .776-.883 15/16 6 1/8 1 5/8 1/2
556.5(37) 477(30/7)
 
  


P
U

ALUMINUM WELDMENT CONNECTORS SECTION
CABLE TO FLAT PAD, continued 18-9



 
  



CONDUCTOR HOLE DIMENSIONS
CATALOG PAD CABLE SIZE
DIAMETER DIA.IN IN INCHES
NUMBER STYLE
AAC ACSR IN INCHES INCHES A B C
18-689 B 600(37)-650(91) 556.5(24/7)-556.5(30/7) .884-.953 1 4 3/4 1 1/4 1/2
18-690 C 600(37)-650(91) 556.5(24/7)-556.5(30/7) .884-.953 1 4 3/4 1/4 1/2
18-691 D 600(37)-650(91) 556.5(24/7)-556.5(30/7) .884-.953 1 5 3/4 1/4 1/2
18-695 B 700(61)-800(61) 605(26/7)-636(30/19) .954-1.039 1 1/8 5 1/8 1 3/4 1/2
18-696 C 700(61)-800(61) 605(26/7)-636(30/19) .954-1.039 1 1/8 5 1/8 1 3/4 1/2
18-697 D 700(61)-800(61) 605(26/7)-636(30/19) .954-1.039 1 1/8 6 1 5/8 3/4
18-698 B 817.5(61)-954(61) 653.9(18/3)-795(24/7) 1.040-1.140 1 3/16 5 1 1/2 3/4
18-699 C 817.5(61)-954(61) 653.9(18/3)-795(24/7) 1.040-1.140 1 3/16 5 1/2 1 7/8 3/4
18-700 D 817.5(61)-954(61) 653.9(18/3)-795(24/7) 1.040-1.140 1 3/16 5 1/2 1 7/8 5/8
18-704 B 1000(61)-1113(61) 954(45/7)-954(54/7) 1.141-1.216 1 1/4 5 3/4 2 1/4 3/4
18-705 C 1000(61)-1113(61) 954(45/7)-954(54/7) 1.141-1.216 1 1/4 5 3/4 2 1/4 3/4
18-706 D 1000(61)-1113(61) 954(45/7)-954(54/7) 1.141-1.216 1 1/4 6 3/4 2 1/4 5/8
18-710 B 1200(91)-1272(61) 1033.5(54/7)-1113(54/19) 1.217-1.300 1 3/8 5 3/4 2 1/4 5/8
18-711 C 1200(91)-1272(61) 1033.5(54/7)-1113(54/19) 1.217-1.300 1 3/8 5 3/4 2 1/4 3/4
18-712 D 1200(91)-1272(61) 1033.5(54/7)-1113(54/19) 1.217-1.300 1 3/8 1 3/4 2 1/4 3/4
18-722 B 1351.5(61)-1590(61) 1272(45/7)-1431(45/7) 1.301-1.454 1 1/2 5 7/8 2 1/2 3/4
18-723 C 1351.5(61)-1590(61) 1272(45/7)-1431(45/7) 1.301-1.454 1 1/2 5 7/8 2 1/2 3/4
18-724 D 1351.5(61)-1590(61) 1272(45/7)-1431(45/7) 1.301-1.454 1 1/2 6 7/8 2 1/2 1
18-724-SP(1700AAC) D 1600(127)-1700(127) 1431(54/19)-1510.5(54/19) 1.455-1.506 1 9/16 7 2 5/8 3/4
18-724-SP(1590ACSR) D 1750(127) 1590(54/19) 1.507-1.545 1 5/8 7 2 5/8 3/4
18-724-SP(2000AAC) D 2000(91)(127) 1780(84/19) 1.546-1.680 1 3/4 7 3/4 3 1
18-724-SP(2156ACSR) D 2250(91) 2034(72/7)-2167(72/7) 1.681-1.801 1 7/8 7 3/4 3 1
18-724-SP(2500AAC) D 2500(127) 2312(76/19)-2515(76/19) 1.802-1.880 2 7 3/4 3 1
18-724-SP(3000AAC) D 3000(127) 1.890-1.998 2 1/8 7 3/4 3 1
18-724-SP(3500AAC) D 3500(127) 1.999-2.159 2 1/4 7 3/4 3 1
P
U
CONDUCTOR DIMENSIONS
CATALOG PAD CABLE SIZE HOLE
DIAMETER IN INCHES
NUMBER STYLE DIAMETER
AAC ACSR IN INCHES A B C
18-725 B 1/0 1/0 .355-.398 7/16 4 3/4 1 5/8 1/2
18-726 C 1/0 1/0 .355-.398 7/16 4 3/4 1 5/8 1/2
18-727 D 1/0 1/0 .355-.398 7/16 5 3/4 1 5/8 1/2

Featuring two-cable
18-728 B 2/0 2/0 .399-.447 1/2 4 3/4 1 5/8 1/2
termination, the type
WCP2 cast of a light- 18-729 C 2/0 2/0 .399-.447 1/2 4 3/4 1 5/8 1/2
weight, corrosion 18-730 D 2/0 2/0 .399-.447 1/2 5 3/4 1 5/8 1/2
resistant aluminum 18-731 B 3/0 3/0 .448-.502 9/16 4 3/4 1 5/8 1/2
alloy makes an
18-732 C 3/0 3/0 .448-.502 9/16 4 3/4 1 5/8 1/2
economical and
reliable connection. 18-733 D 3/0 3/0 .448-.502 9/16 5 3/4 1 5/8 1/2
18-734 B 4/0 4/0 .503-.563 5/8 4 3/4 1 5/8 1/2

Side-formed NEMA
pads are standard. 18-735 C 4/0 4/0 .503-.563 5/8 4 3/4 1 5/8 1/2
Any special tongue 18-736 D 4/0 4/0 .503-.563 5/8 5 3/4 1 5/8 1/2
features will be readily 18-737 B 250-300 266.8(26/7) .564-.642 11/16 4 3/4 1 5/8 1/2
provided if designated 18-738 C 250-300 266.8(26/7) .564-.642 11/16 4 3/4 1 5/8 1/2
by adding a suffix
18-739 D 250-300 266.8(26/7) .564-.642 11/16 5 3/4 1 5/8 1/2
336.4(19)- 336.4(36/1)-
Example: a 45 degree 18-743 B
397.5(37) 336.4(26/7)
.643-.721 3/4 4 3/4 1 5/8 1/2
tongue for catalog number
336.4(19)- 336.4(36/1)-
18-725 should be or- 18-744 C
397.5(37) 336.4(26/7)
.643-.721 3/4 4 3/4 1 5/8 1/2
dered as 18-725-45.
336.4(19)- 336.4(36/1)-
18-745 D .643-.721 3/4 5 3/4 1 5/8 1/2
397.5(37) 336.4(26/7)
400(37)- 397.5(18/1)-
18-746 B .722-.795 7/8 4 3/4 1 5/8 1/2
477(37) 397.5(24/7)
400(37)- 397.5(18/1)-
 18-747 C .722.795 7/8 4 3/4 1 5/8 1/2
477(37) 397.5(24/7)

400(37)- 397.5(18/1)-
18-748 D .722-.795 7/8 5 3/4 1 5/8 1/2
 477(37) 397.5(24/7)
500(61)- 477(24/7)-
18-749 B .796-.883 15/16 5 1 5/8 1/2
556.5(37) 477(30/7)
500(61)- 477(24/7)-
18-750 C .796-.883 15/16 5 1 5/8 1/2
556.5(37) 477(30/7)
500(61)- 477(24/7)-

18-751 D .796-.883 15/16 6 1 5/8 3/4

556.5(37) 477(30/7)



P
U
DOUBLE CABLE TO FLAT PAD 18-10








CONDUCTOR DIMENSIONS
CATALOG PAD CABLE SIZE HOLE
DIAMETER IN INCHES
NUMBER STYLE DIAMETER
AAC ACSR IN INCHES A B C
18-752 B 600(37)-650(91) 556.5(24/7)-556.5(30/7) .884-.953 1 5 1 5/8 1/2
18-753 C 600(37)-650(91) 556.5(24/7)-556.5(30/7) .884-.953 1 5 1 5/8 1/2
18-754 D 600(37)-650(91) 556.5(24/7)-556.5(30/7) .884-.953 1 6 1 3/4 3/4
18-758 B 700(61)-800(61) 605(26/7)-636(30/19) .954-1.039 1 1/8 5 1 1/2 1/2
18-759 C 700(61)-800(61) 605(26/7)-636(30/19) .954-1.039 1 1/8 5 1 1/2 1/2
18-760 D 700(61)-800(61) 605(26/7)-636(30/19) .954-1.039 1 1/8 6 1 3/4 3/4
18-761 B 817.5(61)-954(61) 653.9(18/3)-795(24/7) 1.040-1.140 1 3/16 5 3/8 2 1/2
18-762 C 817.5(61)-954(61) 653.9(18/3)-795(24/7) 1.040-1.140 1 3/16 5 3/8 2 5/8
18-763 D 817.5(61)-954(61) 653.9(18/3)-795(24/7) 1.040-1.140 1 3/16 6 3/8 2 1
18-767 B 1000(61)-1113(61) 954(45/7)-954(54/7) 1.141-1.216 1 1/4 5 1/2 2 1/2
18-768 C 1000(61)-1113(61) 954(45/7)-954(54/7) 1.141-1.216 1 1/4 5 1/2 2 5/8
18-769 D 1000(61)-1113(61) 954(45/7)-954(54/7) 1.141-1.216 1 1/4 6 1/2 2 1
18-773 B 1200(91)-1272(61) 1033.5(54/7)-1113(54/19) 1.217-1.300 1 3/8 5 1/2 2 1/2
18-774 C 1200(91)-1272(61) 1033.5(54/7)-1113(54/19) 1.217-1.300 1 3/8 5 1/2 2 5/8
18-775 D 1200(91)-1272(61) 1033.5(54/7)-1113(54/19) 1.217-1.300 1 3/8 6 3/8 2 1
18-785 B 1351.5(61)-1590(61) 1272(45/7)-1431(45/7) 1.301-1.454 1 1/2 6 3/4 2 3/8 1
18-786 C 1351.5(61)-1590(61) 1272(45/7)-1431(45/7) 1.301-1.454 1 1/2 6 3/4 2 3/8 1
18-787 D 1351.5(61)-1590(61) 1272(45/7)-1431(45/7) 1.301-1.454 1 1/2 6 3/8 2 1
18-787-SP(1700AAC) D 1600(127)-1700(127) 1431(54/19)-1510.5(54/19) 1.455-1.506 1 9/16 6 3/8 2 1
18-787-SP(1590ACSR) D 1750(127) 1590(54/19) 1.507-1.545 1 5/8 7 1/8 3 1 1/8
18-787-SP(2000AAC) D 2000(91)(127) 1780(84/19) 1.546-1.680 1 3/4 7 1/8 3 1 1/8
18-787-SP(2156ACSR) D 2250(91) 2034(72/7)-2167(72/7) 1.681-1.801 1 7/8 7 1/8 3 1 1/8
18-787-SP(2500AAC) D 2500(127) 2312(76/19)-2515(76/19) 1.802-1.880 2 7 1/8 3 1 1/8
18-787-SP(3000AAC) D 3000(127) 1.890-1.998 2 1/8 7 1/8 3 1 1/8
18-787-SP(3500AAC) D 3500(127) 1.999-2.159 2 1/4 7 1/8 3 1 1/8
P
U
18-11 PIPE TO CABLE, TEE




* 

An economical and dependable DIMENSIONS

method of connecting a tee tap to CATALOG PIPE IN INCHES
a pipe main, the type WTC is cast NUMBER SIZE IPS A B
of a lightweight aluminum alloy 18-788-* 1/2 2 3/8 1 5/8
for high conductivity and natural
resistance to corrosion and stress. 18-796-* 3/4 2 3/8 1 5/8
18-804-* 1 2 3/8 1 5/8
*Specify cable size as a suffix.
18-812-* 1 1/4 2 1/2 1 5/8
Example: 2" IPS main to a
477AAC tap, 18-828-477AAC 18-820-* 1 1/2 2 3/8 1 5/8
18-828-* 2 2 3/8 1 5/8
18-845-* 2 1/2 3 1 1/2
18-862-* 3 3 1 1/2
18-871-* 3 1/2 3 7/8 1 7/8
18-884-* 4 3 7/8 1 7/8
18-897-* 4 1/2 4 1 7/8
18-910-* 5 4 3/8 1 7/8
18-922-* 6 4 7/8 1 7/8
P
U
PIPE TO CABLE COUPLER REDUCER 18-12






DIMENSIONS Made of a lightweight aluminum

CATALOG PIPE IN INCHES alloy for high conductivity and
NUMBER SIZE IPS natural resistance to corrosion
A B
and stress, the economical
18-933* 1/2 1 3/4
type WRTC secures a cable
18-941* 3/4 1 3/4 to a tubular bus permanently.
18-949* 1 1 1/4 3/4
*Specify cable size as a suffix.
18-957* 1 1/4 1 1/4 3/4
Example: 2" IPS main to a
18-965* 1 1/2 1 1/2 3/4 477AAC tap, 18-973-477AAC.
18-973* 2 1 3/4 3/4
18-990* 2 1/2 2 3/4
18-1007* 3 2 1/4 1 1/2
18-1016* 3 1/2 2 1/2 1 1/2
18-1029* 4 2 1/2 1 1/2
18-1042* 4 1/2 2 3/4 1 1/2
18-1055* 5 2 3/4 1 1/2
18-1067* 6 3 1 1/2
P
U
18-13 EXPANSION COUPLER SUPPORT
18 1/4"
(APPROXIMATE) A
MOUNTING DIMENSIONS
CATALOG PIPE IN INCHES
BOLT
NUMBER SIZE IPS
CIRCLE A B
In addition to featuring a lightweight 18-1078 3 1/2 1 3/4 3/8
and corrosion-resistant aluminum 18-1079 5 1/2 2 1/8 1/2
alloy as well as economy and 18-1080 3 3/4 2 3/8
permanence in joining bus su pports, 18-1081 5 3/4 2 1/4 1/2
the type WES also compensates for 18-1082 3 1 2 3/8
temperature variations and thereby 18-1083 5 1 2 1/4 1/2
protects equipment bushings, switch 18-1084 3 1 1/4 2 1/4 3/8
gear, and insulators from expanding 18-1085 5 1 1/4 2 3/8 1/2
18-1086 3 1 1/2 2 1/2 3/8
or contracting bus pressures.
18-1087 5 1 1/2 2 1/2 1/2
The flexible shunts of laminated soft 18-1088 3 2 2 3/4 1/2
aluminum are designed to withstand 18-1089 5 2 2 3/4 1/2
the maximum current of the bus it 18-1090 3 2 1/2 3 1/8 1/2
connects. 18-1091 5 2 1/2 3 1/8 1/2
18-1092 3 3 3 5/8 1/2
The aluminum shunts are factory 18-1093 5 3 3 5/8 1/2
welded into the castings. 18-1094 3 3 1/2 4 1/2
(2) Drive fit end plugs included for 18-1095 5 3 1/2 4 1/2
bus pipe. 18-1096 3 4 4 1/2 1/2
18-1097 5 4 4 1/2 1/2
18-1098 3 4 1/2 4 3/4 1/2
18-1099 5 4 1/2 4 3/4 1/2
18-1100 3 5 5 1/2
18-1101 5 5 5 1/2
18-1102 3 6 5 1/2 1/2
18-1103 5 6 5 1/2 1/2
FOR EHPS (SCH80) INTERNAL PIPE FITTINGS

USE SUFFIX (H). EX.18-1103H
P
U
EXPANSION COUPLER PIPE TO PIPE 18-14
A
(APPROXIMATE)
DIMENSIONS
NUMBER SIZE IPS
A
Cast of a lightweight and corrosion-
18-1104 1/2 -
resistant aluminum alloy, the
18-1105 3/4 - economical type WEC makes a
18-1106 1 12 permanent and reliable connection
between pipe and offers protection
18-1107 1 1/4 12 for equipment bushings, switch
18-1108 1 1/2 12 gear, and insulators by compensating
for expansion and contraction due
18-1109 2 12
to temperature variations.
18-1110 2 1/2 12
The flexible shunts of laminated
18-1111 3 12 soft aluminum are designed to
18-1112 3 1/2 12 carry the maximum current of
the bus the connector joins.
18-1113 4 12
The aluminum shunts are factory
18-1114 4 1/2 12 welded into the castings.
18-1115 5 16
18-1116 6 16
FOR EHPS (SCH80) INTERNAL PIPE FITTINGS

USE SUFFIX (H). EX.18-1116H
P
U
18-15 EXPANSION TERMINAL TO PIPE
A
(APPROXIMATE)
B FOR PAD ROTATED

90 DEGREES USE SUFFIX (V)
EXAMPLE 18-1139V
DIMENSIONS
CATALOG PIPE PAD IN INCHES
NUMBER SIZE IPS STYLE
A B
18-1117 1/2 B 16.5 7/16
18-1118 1/2 C 16.5 7/16
18-1119 1/2 D 17.5 7/16
18-1120 3/4 B 16.5 7/16
18-1121 3/4 C 16.5 7/16
18-1122 3/4 D 17.5 7/16
An economical connector for 18-1123 1 B 16.5 1/2
making a permanent union 18-1124 1 C 16.5 1/2
between a terminal and a tubular 18-1125 1 D 17.5 1/2
bus, the type AETF cast of a 18-1126 1 1/4 B 16.5 9/16
18-1127 1 1/4 C 16.5 9/16
lightweight and corrosion-resistant
18-1128 1 1/4 D 17.5 9/16
aluminum compensates for 18-1129 1 1/2 B 16.5 5/8
temperature variations and thus 18-1130 1 1/2 C 16.5 5/8
protects equipment bushings, 18-1131 1 1/2 D 17.5 5/8
switch gear, and insulators 18-1132 2 B 16.5 5/8
from expanding or contracting 18-1133 2 C 16.5 5/8
18-1134 2 D 17.5 5/8
bus pressures. 18-1135 2 1/2 B 16.5 11/16
Flexible shunts of laminated 18-1136 2 1/2 C 16.5 11/16
18-1137 2 1/2 D 17.5 11/16
soft aluminum are designed for
18-1138 3 B 16.5 7/8
carrying the maximum current 18-1139 3 C 16.5 7/8
of the bus it connects. 18-1140 3 D 17.5 7/8
18-1141 3 1/2 B 16.5 1
The aluminum shunts are factory
18-1142 3 1/2 C 16.5 1
welded into the castings. 18-1143 3 1/2 D 17.5 1
18-1144 4 B 16.5 1
18-1145 4 C 16.5 1
18-1146 4 D 17.5 1
18-1147 4 1/2 B 16.5 1
18-1148 4 1/2 C 16.5 1
18-1149 4 1/2 D 16.5 1
18-1150 5 B 18.5 1
FOR EHPS (SCH80) INTERNAL PIPE 18-1151 5 C 18.5 1
FITTINGS USE SUFFIX (H). EX.18-1155H 18-1152 5 D 19.5 1
18-1153 6 B 21.5 1 1/8
18-1154 6 C 21.5 1 1/8
18-1155 6 D 22.5 1 1/8
P
U
EXPANSION STUD TO PIPE 18-16
A
(APPROXIMATE)
DIMENSIONS The type WEST is an economical

CATALOG STUD PIPE IN INCHES means of joining a threaded bronze
NUMBER SIZE SIZE IPS stud to a pipe bus and offers the
A B K
18-1156 1/2-13 1/2 12 2 1/2 1/2
added feature of being able to
18-1157 1/2-13 3/4 12 2 1/2 1/2 compensate for temperature
18-1158 1/2-13 1 12 2 1/2 1/2 variations. It protects equipment
18-1159 3/4-16 1/2 12 2 1/2 1/2 bushings, switch gear, and
18-1160 3/4-16 3/4 12 2 1/2 1/2 insulators from expanding or
18-1161 3/4-16 1 12 2 1/2 1/2
contracting bus pressures.
18-1162 1-14 1/2 12 2 1/2 1/2
18-1163 1-14 3/4 12 2 1/2 1/2 A lightweight and corrosion resistant
18-1164 1-14 1 12 2 1/2 1/2 aluminum alloy casting makes this
18-1165 1-14 1 1/4 12 2 1/2 1/2
connector durable and dependable
18-1166 1 1/8-12 1/2 12 3 1/2
18-1167 1 1/8-12 3/4 12 3 1/2 in the field.
18-1168 1 1/8-12 1 12 3 1/2 Flexible shunts of laminated soft
18-1169 1 1/8-12 1 1/4 12 3 1/2
aluminum are designed to withstand
18-1170 1 1/4-12 1/2 12 3 1/2
18-1171 1 1/4-12 3/4 12 3 1/2
the maximum current of the bus.
18-1172 1 1/4-12 1 12 3 1/2 The aluminum shunts are factory
18-1173 1 1/4-12 1 1/4 12 3 1/2 welded into the castings.
18-1174 1 1/4-12 1 1/2 12 3 1/2
18-1175 1 1/2-12 1/2 12 3 1/2 Unthreaded studs or stud sizes
18-1176 1 1/2-12 3/4 12 3 1/2 not listed must be specified with
18-1177 1 1/2-12 1 12 3 1/2 the order.
18-1178 1 1/2-12 1 1/4 12 3 1/2
18-1179 1 1/2-12 1 1/2 12 3 1/2
18-1180 1 1/2-12 2 12 3 1/2
18-1181 1 3/4-12 3/4 12 3 1/2
18-1182 1 3/4-12 1 12 3 1/2
18-1183 1 3/4-12 1 1/4 12 3 1/2
18-1184 1 3/4-12 1 1/2 12 3 1/2
18-1185 1 3/4-12 2 12 3 1/2
18-1186 2-12 1 12 3 1/2
18-1187 2-12 1 1/4 12 3 1/2
18-1188 2-12 1 1/2 12 3 1/2
18-1189 2-12 2 12 3 1/2
18-1190 2-12 2 1/2 12 3 5/8 FOR EHPS (SCH80) INTERNAL PIPE
18-1191 2 1/4-12 1 1/4 12 3 1/2 FITTINGS USE SUFFIX (H). EX.18-1191H
P
U
18-16 EXPANSION STUD TO PIPE
CONTINUED FROM PROVIONS PAGE
DIMENSIONS
CATALOG STUD PIPE IN INCHES
A B K
18-1192 2 1/4-12 1 1/2 12 3 1/2
18-1193 2 1/4-12 2 12 3 1/2
18-1194 2 1/4-12 2 1/2 14 3 5/8
18-1195 2 1/2-12 1 1/2 12 3 1/2
18-1196 2 1/2-12 2 12 3 1/2
18-1197 2 1/2-12 2 1/2 14 3 5/8
18-1198 2 1/2-12 3 14 3 5/8
18-1199 2 3/4-12 1 1/2 12 3 1/2 1/2
18-1200 2 3/4-12 2 12 3 1/2 1/2
18-1201 2 3/4-12 2 1/2 14 3 1/2 5/8
18-1202 2 3/4-12 3 14 3 1/2 5/8
18-1203 2 3/4-12 3 1/2 14 3 1/2 5/8
18-1204 3-12 2 12 3 1/2 1/2
18-1205 3-12 2 1/2 14 3 1/2 5/8
18-1206 3-12 3 14 3 1/2 5/8
A
(APPROXIMATE)
18-1207 3-12 3 1/2 14 3 1/2 5/8
18-1208 3-12 4 14 3 1/2 5/8
B
18-1209 3 1/4-12 2 1/2 14 3 1/2 5/8
18-1210 3 1/4-12 3 14 3 1/2 5/8
18-1211 3 1/4-12 3 1/2 14 3 1/2 5/8
18-1212 3 1/4-12 4 14 3 1/2 5/8
18-1213 3 1/2-12 2 1/2 14 3 1/2 5/8
18-1214 3 1/2-12 3 14 3 1/2 5/8
K 18-1215 3 1/2-12 3 1/2 14 3 1/2 5/8
18-1216 3 1/2-12 4 14 3 1/2 5/8
18-1217 4-12 2 1/2 14 3 1/2 5/8
18-1218 4-12 3 14 3 1/2 5/8
18-1219 4-12 3 1/2 14 3 1/2 5/8
18-1220 4-12 4 14 3 1/2 5/8
FOR EHPS (SCH80) INTERNAL PIPE

FITTINGS USE SUFFIX (H). EX.18-1220H
P
U
GROUNDING STUD 18-17




CATALOG NUMBER PIPE SIZE IPS Lightweight and durable, the type GS
stud temporarily grounds out dead bus for
18-1280-WR 1-6
purposes of safety during maintenance
operations on substation equipment.
P
U
18-18 INTERNAL END PLUG

CATALOG DIMENSIONS
NUMBER PIPE IN INCHES
SIZE IPS
SCH 40 SCH 80 A
18-1286 18-1286H 1/2 1
18-1287 18-1287H 3/4 1
18-1288 18-1288H 1 1
18-1289 18-1289H 1 1/4 7/8
18-1290 18-1290H 1 1/2 7/8
18-1291 18-1291H 2 7/8
18-1292 18-1292H 2 1/2 1 3/8
18-1293 18-1293H 3 1 1/4
18-1294 18-1294H 3 1/2 1 1/4
18-1295 18-1295H 4 1 1/8
18-1296 18-1296H 4 1/2 1 1/8
18-1297 18-1297H 5 1 1/4
18-1298 18-1298H 6 1 1/8
*Add suffix “-EXP” for low profile expansion end

plugs.
Ex: 18-1293-EXP
P
U
EXTERNAL END BELL 18-19
CATALOG DIMENSIONS
NUMBER PIPE IN INCHES
SIZE IPS
SCH 40 A B C
18-1299 1/2 1 3/4 1 1/4 3/8
18-1300 3/4 1 3/4 1 1/4 3/8
18-1301 1 2 1 3/8 3/8
18-1302 1 1/4 2 1/4 1 5/8 3/8
18-1303 1 1/2 2 5/8 2 1/4
18-1304 2 3 7/8 3/8
18-1305 2 1/2 3 3/4 1 3/8
18-1306 3 4 1/2 1 1/4 3/8
18-1307 3 1/2 4 7/8 2 3/8 5/8
18-1308 4 5 1/2 2 3/4 5/8
18-1309 4 1/2 5 1/2 2 3/4 5/8
18-1310 5 7 4 3/4
18-1311 6 8 1/2 4 3/4
P
U
PIPE TO FLAT PAD 18-SW-1
A
B
Made of a light weight

and corrosion-resistant
aluminum alloy, the swage
pipe to flat pad connectors
makes a permanent
connection between
connector and pipe.
Any special tongue features

CATALOG
NUMBER
PIPE MAIN
IPS
PAD
STYLE
PAD
THICKNESS
SWAGE
DIE
will be readily provided if
A B C
designated by the addition
SW-107 1 B 7 3 1/2 1 1/8 1/2 B100
of a suffix to the catalog
SW-108 1 C 7 3 1/2 1 1/8 1/2 B100
SW-109 1 D 8 3 1/2 1 1/8 1/2 B100
number.
SW-113 1 1/2 B 7 3 1/2 1 1/2 1/2 B150
Example: If a center-formed
SW-114 1 1/2 C 7 3 1/2 1 1/2 1/2 B150
SW-115 1 1/2 D 8 3 1/2 1 1/2 1/2 B150
tongue were requested for
SW-116 2 B 7 1/2 4 1 3/4 1/2 B200
catalog number SW-107,
SW-117 2 C 7 1/2 4 1 3/4 1/2 B200 that number should appear
SW-118 2 D 8 1/2 4 1 3/4 1/2 B200 on the order as SW-107-CF.
SW-119 2 1/2 B 7 1/2 4 2 3/8 1/2 B250
SW-120 2 1/2 C 7 1/2 4 2 3/8 1/2 B250 Example: If a side-form
SW-121 2 1/2 D 8 1/2 4 2 3/8 1/2 B250 tongue were requested for
SW-122 3 B 8 1/8 4 5/8 2 3/8 5/8 B300 a 1” IPS B Pad fitting, the
SW-123 3 C 8 1/8 4 5/8 2 3/8 5/8 B300 corresponding catalog
SW-124 3 D 9 1/8 4 5/8 2 3/8 5/8 B300 number would be SW-107.
SW-125 3 1/2 B 8 1/8 4 3/4 2 5/8 3/4 B350
SW-126 3 1/2 C 8 1/8 4 3/4 2 5/8 3/4 B350 Example: If a 90-degree
SW-127 3 1/2 D 9 1/8 4 3/4 2 5/8 3/4 B350 tongue were requested for
SW-128 4 B 8 1/8 4 3/4 2 7/8 3/4 B400 catalog number SW-107,
SW-129 4 C 8 1/8 4 3/4 2 7/8 3/4 B400 that number should appear
SW-130 4 D 9 1/8 4 3/4 2 7/8 3/4 B400 on the order as SW-107-90.
P
U
SECTION ALUMINUM SWAGE EXPANSION
18-SW-1-EX CONNECTORS PIPE TO FLAT PAD
With a high conductivity aluminum alloy, CATALOG PIPE MAIN PAD

SWAGE DIE
the swage pipe to flat pad expansion NUMBER IPS STYLE
connectors secures a tube to flat bar SW-107-EX 1 B B100
bus with a flexible connection. SW-108-EX 1 C B100
SW-109-EX 1 D B100
Center formed NEMA pads are standard. SW-113-EX 1 1/2 B B150
SW-114-EX 1 1/2 C B150

Aluminum pad surface is coated with SW-115-EX 1 1/2 D B150
contact sealant and bolted to laminated SW-116-EX 2 B B200
shunt at factory. Preformed copper SW-117-EX 2 C B200
laminated shunt has tin plated contacts SW-118-EX 2 D B200
SW-119-EX 2 1/2 B B250

Use suffix EX90 for 90-degree expansion
SW-120-EX 2 1/2 C B250
terminal as illustrated.
SW-121-EX 2 1/2 D B250
Use suffix EX for standard expansion SW-123-EX 3 C B300
terminal as illustrated. SW-124-EX 3 D B300
SW-126-EX 3 1/2 C B350

Example: For a 3” IPS expansion SW-127-EX 3 1/2 D B350
terminal to a D pad, the corresponding SW-130-EX 4 D B400
catalog number would be SW-124-EX.
Example: For a 3” IPS 90-degree expansion

terminal to a D pad, the corresponding
catalog number would be SW-124-EX90.
P
U
PIPE TO PIPE, TEE 18-SW-2
CATALOG DIMENSIONS IN INCHES SWAGE DIES For a secure and reliable connection
IPS MAIN IPS TAP
NUMBER A B MAIN TAP between a pipe main and a tubular
SW-145 1 1 5 10 B100 B100 tap at a 90-degree angle, the swage
SW-152 1 1/2 1 5 1/4 10 B150 B100 pipe to pipe tee makes a particularly
SW-154 1 1/2 1 1/2 5 1/4 10 B150 B150 effective and economical choice.
SW-157 2 1 5 1/2 10 B200 B100
SW-159 2 1 1/2 5 1/2 10 B200 B150

It is made of lightweight and corro-
SW-160 2 2 6 10 B200 B200
sion-resistance aluminum alloy.
SW-163 2 1/2 1 5 7/8 10 B250 B100
SW-165 2 1/2 1 1/2 5 7/8 10 B250 B150

Example: For a 3” IPS run to a 3”
SW-166 2 1/2 2 6 3/8 10 B250 B200
IPS tap, the corresponding catalog
SW-167 2 1/2 2 1/2 6 3/8 10 B250 B250
SW-170 3 1 6 1/8 11 3/4 B300 B100

number would be SW-175.
SW-172 3 1 1/2 6 1/8 11 3/4 B300 B150
SW-173 3 2 6 11/16 11 3/4 B300 B200

Split Sleeve Connectors
SW-174 3 2 1/2 6 11/16 11 3/4 B300 B250
(Use Prefix “SWS”)
SW-175 3 3 7 3/16 11 3/4 B300 B300
SW-178 3 1/2 1 6 1/2 11 3/4 B350 B100

EX: SWS-175
SW-180 3 1/2 1 1/2 6 1/2 11 3/4 B350 B150
SW-181 3 1/2 2 7 11 3/4 B350 B200
SW-182 3 1/2 2 1/2 7 11 3/4 B350 B250
SW-183 3 1/2 3 7 1/2 11 3/4 B350 B300
SW-184 3 1/2 3 1/2 7 1/2 11 3/4 B350 B350
SW-187 4 1 6 3/4 11 3/4 B400 B100
SW-189 4 1 1/2 6 3/4 11 3/4 B400 B150
SW-190 4 2 7 1/4 11 3/4 B400 B200
SW-191 4 2 1/2 7 1/4 11 3/4 B400 B250
SW-192 4 3 7 3/4 11 3/4 B400 B300
SW-193 4 3 1/2 7 3/4 11 3/4 B400 B350
SW-194 4 4 7 3/4 11 3/4 B400 B400
P
U
18-SW-3 PIPE TO ANGLE PIPE, TEE
CATALOG DIMENSIONS IN INCHES SWAGE DIES

IPS MAIN IPS TAP
NUMBER A B MAIN TAP
SW-236 1 1 5 1/4 10 B100 B100
The swage angled pipe connectors SW-243 1 1/2 1 5 1/2 10 B150 B100
for joining pipe main to a tap whose SW-245 1 1/2 1 1/2 5 1/2 10 B150 B150
angle varies is a reliable and easy
SW-248 2 1 6 10 B200 B100
to install connector. This connector is
made of lightweight and corrosion- SW-250 2 1 1/2 6 10 B200 B150
resistant aluminum alloy makes a SW-251 2 2 6 1/2 10 B200 B200

permanent connection. It can be SW-254 2 1/2 1 6 5/8 10 B250 B100
used in self-supporting A-frame SW-256 2 1/2 1 1/2 6 5/8 10 B250 B150
structures. SW-257 2 1/2 2 7 1/8 10 B250 B200
SW-258 2 1/2 2 1/2 7 1/8 10 B250 B250

In ordering the swage angled pipe
SW-261 3 1 7 1/8 11 3/4 B300 B100
connector, the varying angle must be
SW-263 3 1 1/2 7 1/8 11 3/4 B300 B150
designated in a suffix added to the
SW-264 3 2 7 5/8 11 3/4 B300 B200
catalog number to insure maximum
SW-265 3 2 1/2 7 5/8 11 3/4 B300 B250
efficiency in filling the order.
SW-266 3 3 8 1/8 11 3/4 B300 B300
Example: A 15-degree angle tap for SW-269 3 1/2 1 7 1/2 11 3/4 B350 B100
catalog number SW-236, should be SW-271 3 1/2 1 1/2 7 1/2 11 3/4 B350 B150
written as SW-236-15. SW-272 3 1/2 2 8 11 3/4 B350 B200
SW-273 3 1/2 2 1/2 8 11 3/4 B350 B250
Split Sleeve Connectors SW-274 3 1/2 3 8 1/2 11 3/4 B350 B300
(Use Prefix “SWS”) SW-275 3 1/2 3 1/2 8 1/2 11 3/4 B350 B350
SW-278 4 1 7 3/4 11 3/4 B400 B100
EX: SWS-236-15 SW-280 4 1 1/2 7 3/4 11 3/4 B400 B150
SW-281 4 2 8 1/4 11 3/4 B400 B200
SW-282 4 2 1/2 8 1/4 11 3/4 B400 B250
SW-283 4 3 8 3/4 11 3/4 B400 B300
SW-284 4 3 1/2 8 3/4 11 3/4 B400 B350
SW-285 4 4 8 3/4 11 3/4 B400 B400
P
U
PIPE TO ANGLE PIPE, VEE 18-SW-4
AS REQUIRED
CATALOG DIMENSIONS IN INCHES SWAGE DIES

IPS MAIN IPS TAP
NUMBER A B MAIN TAP
SW-327 1 1 5 1/8 10 B100 B100
SW-334 1 1/2 1 5 1/8 10 B150 B100 For joining a pipe main to taps whose
SW-336 1 1/2 1 1/2 6 10 B150 B150 angles vary from the perpendicular,
SW-339 2 1 5 1/8 10 B200 B100 the swage vee offers excellent
SW-341 2 1 1/2 6 10 B200 B150 performance and easy installation.
SW-342 2 2 6 3/4 10 B200 B200 Cast of high conductivity lightweight
SW-345 2 1/2 1 5 1/8 10 B250 B100 and corrosion-resistant aluminum
SW-347 2 1/2 1 1/2 6 10 B250 B150 alloy, it can be used in self-supporting
SW-348 2 1/2 2 6 3/4 10 B250 B200 A-frame structures.
SW-349 2 1/2 2 1/2 7 1/4 10 B250 B250
SW-352 3 1 5 1/8 11 3/4 B300 B100

To insure maximum efficiency in filling
SW-354 3 1 1/2 6 11 3/4 B300 B150
the order, the varying angles should be
SW-355 3 2 6 3/4 11 3/4 B300 B200
designated by means of a suffix added
SW-356 3 2 1/2 7 1/4 11 3/4 B300 B250
SW-357 3 3 8 1/4 11 3/4 B300 B300
SW-360 3 1/2 1 5 1/8 11 3/4 B350 B100

Example: A 15-degree angle tap for
SW-362 3 1/2 1 1/2 6 11 3/4 B350 B150
catalog number SW-327, should be
SW-363 3 1/2 2 6 3/4 11 3/4 B350 B200
ordered as SW-327-15.
SW-364 3 1/2 2 1/2 7 1/4 11 3/4 B350 B250
Split Sleeve Connectors
SW-365 3 1/2 3 8 1/4 11 3/4 B350 B300
(Use Prefix “SWS”)
SW-366 3 1/2 3 1/2 8 1/2 11 3/4 B350 B350
SW-369 4 1 5 1/8 11 3/4 B400 B100

EX: SWS-327-15
SW-371 4 1 1/2 6 11 3/4 B400 B150
SW-372 4 2 6 3/4 11 3/4 B400 B200
SW-373 4 2 1/2 7 1/4 11 3/4 B400 B250
SW-374 4 3 8 1/4 11 3/4 B400 B300
SW-375 4 3 1/2 8 1/2 11 3/4 B400 B350
SW-376 4 4 9 3/4 11 3/4 B400 B400
P
U
18-SW-5 PIPE TO PIPE, Y, PERPENDICULAR MAIN
CATALOG IPS DIMENSIONS IN INCHES SWAGE DIES

IPS MAIN
NUMBER TAPS A B MAIN TAP
SW-418 1 1 4 1/8 4 B100 B100
If an economical and permanent union SW-425 1 1/2 1 4 1/2 4 B150 B100
is required between a pipe main and SW-427 1 1/2 1 1/2 4 1/2 4 1/2 B150 B150
taps whose angles vary from the SW-430 2 1 5 5/8 4 B200 B100
perpendicular, the swage Y connector SW-432 2 1 1/2 5 5/8 4 B200 B150
proves an efficient connector. SW-433 2 2 5 5/8 5 5/8 B200 B200
SW-436 2 1/2 1 5 5/8 4 B250 B100
Durable and lightweight because of its SW-438 2 1/2 1 1/2 5 5/8 4 B250 B150
high conductivity aluminum alloy it can SW-439 2 1/2 2 5 5/8 5 5/8 B250 B200
be especially useful in self-supported SW-440 2 1/2 2 1/2 5 5/8 5 5/8 B250 B250
A-frames structures. SW-443 3 1 6 4 B300 B100
SW-445 3 1 1/2 6 4 B300 B150
Varying angles should be noted SW-446 3 2 6 5 5/8 B300 B200
by means of a suffix added to the SW-447 3 2 1/2 6 5 5/8 B300 B250
catalog number. SW-448 3 3 6 6 B300 B300
SW-451 3 1/2 1 6 1/8 4 B350 B100

Example: A 15 degree angle tap for SW-453 3 1/2 1 1/2 6 1/8 4 B350 B150
catalog number SW-418, should be SW-454 3 1/2 2 6 1/8 5 5/8 B350 B200
written on the order as SW-418-15. SW-455 3 1/2 2 1/2 6 1/8 5 5/8 B350 B250
SW-456 3 1/2 3 6 1/8 6 B350 B300
SW-457 3 1/2 3 1/2 6 1/8 6 1/8 B350 B350
SW-460 4 1 6 1/4 4 B400 B100
SW-462 4 1 1/2 6 1/4 4 B400 B150
SW-463 4 2 6 1/4 5 5/8 B400 B200
SW-464 4 2 1/2 6 1/4 5 5/8 B400 B250
SW-465 4 3 6 1/4 6 B400 B300
SW-466 4 3 1/2 6 1/4 6 1/8 B400 B350
SW-467 4 4 6 1/4 6 1/4 B400 B400
P
U
PIPE TO PIPE COUPLER-REDUCER 18-SW-6
DIMENSIONS
CATALOG SWAGE DIES
IPS MAIN IPS TAP IN INCHES
NUMBER
A MAIN TAP
SW-514 1 1 6 B100 B100 For a coupler connection that re-
SW-526 1 1/2 1 6 1/2 B150 B100 quires two swages to provide a
SW-530 1 1/2 1 1/2 6 B150 B150 stronger joint, use the suffix “L”.
SW-532 2 1 7 B200 B100
Example: For a 3” IPS to 3” IPS
SW-536 2 1 1/2 7 B200 B150
long coupler requiring two swages,
SW-538 2 2 6 B200 B200
the corresponding catalog number
SW-542 2 1/2 1 1/2 7 B250 B150
would be SW-554-L.
SW-544 2 1/2 2 7 1/2 B250 B200
SW-546 2 1/2 2 1/2 6 B250 B250 For installation instructions on long

SW-548 3 1 1/2 7 5/8 B300 B150 swage couplers, call the factory.
SW-550 3 2 8 1/8 B300 B200
SW-552 3 2 1/2 8 1/8 B300 B250 Split Sleeve Connectors

SW-554 3 3 7 1/4 B300 B300 (Use Prefix “SWS”)
SW-556 3 1/2 2 8 1/4 B350 B200
SW-558 3 1/2 2 1/2 8 1/4 B350 B250 EX: SWS-554

SW-560 3 1/2 3 8 3/4 B350 B300
SW-562 3 1/2 3 1/2 8 1/4 B350 B350
SW-564 4 2 8 1/4 B400 B200
SW-566 4 2 1/2 8 1/4 B400 B250
SW-568 4 3 8 3/4 B400 B300
SW-570 4 3 1/2 8 3/4 B400 B350
SW-572 4 4 9 1/4 B400 B400
P
U
18-SW-7 PIPE TO FLAT PAD
For a secure and reliable connection CATALOG PIPE SIZE PAD DIMENSIONS IN INCHES SWAGE
between a pipe bus and a flat pad NUMBER IPS STYLE A B C D DIE
to which a choice fittings may be SW-616 1 B 3 10 2 1/2 B100

bolted, the swage pipe to a flat SW-617 1 C 4 10 3 1/2 B100
pad tee connector is a particularly SW-618 1 D 5 10 4 1/2 B100
adaptable, efficient and economical SW-622 1 1/2 B 3 1/4 10 2 1/2 B150
choice. It is made of a lightweight SW-623 1 1/2 C 4 1/4 10 3 1/2 B150
and corrosion-resistant aluminum SW-624 1 1/2 D 5 1/4 10 4 1/2 B150
alloy for dependability and durability SW-625 2 B 3 1/2 10 2 1/2 B200
in the field. SW-626 2 C 4 1/2 10 3 1/2 B200
SW-627 2 D 5 1/2 10 4 1/2 B200

Example: A 4” IPS pipe to a stan- SW-628 2 1/2 B 3 7/8 10 2 1/2 B250
dard D pad would appear as SW- SW-629 2 1/2 C 4 7/8 10 3 1/2 B250
639. SW-630 2 1/2 D 5 7/8 10 4 1/2 B250
SW-631 3 B 4 1/4 11 3/4 2 5/8 B300

Example: A 4” IPS pipe to a 90-degree SW-632 3 C 5 1/4 11 3/4 3 5/8 B300
pad D pad would appear as SW-639- SW-633 3 D 6 1/4 11 3/4 4 5/8 B300
90. SW-634 3 1/2 B 4 1/2 11 3/4 2 3/4 B350
SW-635 3 1/2 C 5 1/2 11 3/4 3 3/4 B350
SW-636 3 1/2 D 6 1/2 11 3/4 4 3/4 B350
SW-637 4 B 4 3/4 11 3/4 2 3/4 B400
SW-638 4 C 5 3/4 11 3/4 3 3/4 B400
SW-639 4 D 6 3/4 11 3/4 4 3/4 B400
P
U
PIPE TO PIPE, ELBOW 18-SW-8
A rugged connector for linking pipes

of the same size at an angle with per-
manence and reliability, the economi-
CATALOG PIPE SIZE DIMENSIONS IN INCHES
SWAGE DIE cal swage elbow depends on its high
NUMBER IPS A B
conductivity, lightweight aluminum
SW-651 1 3 7 3/4 B100
alloy for resistance to corrosion and
SW-653 1 1/2 3 7 3/4 B150
stress in the field.
SW-654 2 3 1/2 8 1/4 B200
SW-655 2 1/2 3 1/2 8 1/4 B250

Varying angles should be properly
SW-656 3 4 8 3/4 B300 designated as a suffix to the catalog
SW-657 3 1/2 4 8 3/4 B350 number.
SW-658 4 4 8 3/4 B400
Example: If a 45-degree angle

SW-651, the catalog number should
appear as SW-651-45.
Example: If a 90-degree angle

SW-651, the catalog number should
appear as SW-651-90.
P
U
18-SW-13 EXPANSION COUPLER SUPPORT
In addition to featuring a lightweight CATALOG MOUNTING PIPE DIMENSIONS IN INCHE S SWAGE

and corrosion-resistant aluminum alloy NUMBER BOLT CIRCLE SIZE IPS A B C DIE
as well as economy and permanence SW-1082 3 1 2 3/8 17 B100

in joining bus supports. The swage SW-1083 5 1 2 1/4 1/2 19 B100
expansion support compensates for SW-1086 3 1 1/2 2 1/2 3/8 17 B150
temperature variations and thereby SW-1087 5 1 1/2 2 1/2 1/2 19 B150
protects equipment bushings, switch SW-1088 3 2 2 3/4 1/2 17 1/2 B200
gear, and insulators from expanding SW-1089 5 2 2 3/4 1/2 19 1/2 B200
or contracting bus pressures. SW-1090 3 2 1/2 3 1/8 1/2 17 1/2 B250
SW-1091 5 2 1/2 3 1/8 1/2 19 1/2 B250

The flexible shunts of laminated soft SW-1092 3 3 3 5/8 1/2 18 B300
aluminum are designed to withstand the SW-1093 5 3 3 5/8 1/2 20 B300
maximum current of the bus it connects. SW-1094 3 3 1/2 4 1/2 18 B350
SW-1095 5 3 1/2 4 1/2 20 B350

When ordering expansion coupler SW-1096 3 4 4 1/2 1/2 18 B400
supports for schedule 80 bus, use SW-1097 5 4 4 1/2 1/2 20 B400
the suffix “H” in the part number.
Example: If a swage expansion

coupler support were required for
4” IPS Sch. 80 bus with a 5” bolt
circle, the corresponding part
number would be SW-1097H.
P
U
EXPANSION COUPLER PIPE TO PIPE 18-SW-14
Made of a lightweight and corrosion-

PIPE DIMENSIONS resistant aluminum alloy, the swage
CATALOG SWAGE
SIZE IN INCHES expansion pipe to pipe coupler makes
NUMBER DIE
IPS A a permanent and reliable connection
between pipes and offers protection
SW-1106 1 20 B100
for equipment bushings, switch gear,
SW-1108 1 1/2 20 B150 and insulators by compensating for
SW-1109 2 20 1/2 B200 expansion and contraction due to
temperature variations.
SW-1110 2 1/2 20 1/2 B250
SW-1111 3 21 B300 The flexible shunts of laminated soft
SW-1112 3 1/2 21 B350 aluminum are designed to carry the
maximum current of the bus the
SW-1113 4 21 B400 connectors joins.
When ordering expansion coupler

supports for schedule 80 bus, use
the suffix “H” in the part number.
Example: If a swage expansion coupler

support were required for 4” IPS Sch.
80 bus, the corresponding part number
would be SW-1113H.
P
U
18-SW-15 EXPANSION TERMINAL TO PIPE
CATALOG PIPE SIZE PAD DIMENSIONS IN INCHES SWAGE

NUMBER IPS SIZE A B DIE
SW-1123 1 B 19 1/2 B100
SW-1124 1 C 19 1/2 B100
SW-1125 1 D 20 1/2 B100
SW-1129 1 1/2 B 19 5/8 B150
SW-1130 1 1/2 C 19 5/8 B150
SW-1131 1 1/2 D 20 5/8 B150
An economical connector making a perma- SW-1132 2 B 19 1/2 5/8 B200

nent union between a terminal and a tubular SW-1133 2 C 19 1/2 5/8 B200
bus, the swage expansion terminal is made SW-1134 2 D 20 1/2 5/8 B200
of a lightweight and corrosion-resistant SW-1135 2 1/2 B 19 1/2 11/16 B250
aluminum that compensates for temperature SW-1136 2 1/2 C 19 1/2 11/16 B250
variations and thus protects equipment SW-1137 2 1/2 D 20 1/2 11/16 B250
bushings, switch gear, and insulators from SW-1138 3 B 20 7/8 B300
expanding or contracting bus pressures. SW-1139 3 C 20 7/8 B300
SW-1140 3 D 21 7/8 B300

Flexible shunts of laminated soft aluminum SW-1141 3 1/2 B 20 1 B350
are designed for carrying the maximum SW-1142 3 1/2 C 20 1 B350
current of the bus it connects. SW-1143 3 1/2 D 21 1 B350
SW-1144 4 B 20 1 B400
When ordering expansion coupler supports SW-1145 4 C 20 1 B400
for schedule 80 bus, use the suffix “H” in SW-1146 4 D 21 1 B400
the part number.
Example: If a swage expansion terminal

were required for 4” IPS Sch. 80 bus,
the corresponding part number would
be SW-1146H.
P
U
GROUNDING STUD 18-SW-17
CATALOG PIPE SIZE DIMENSIONS IN INCHES Lightweight and durable, the swage
NUMBER IPS A
SWAGE DIE
grounding stud connector temporarily
SW-1275 1 6 B100 grounds out dead bus for purposes of
SW-1277 1 1/2 6 B150 safety during maintenance operations
SW-1278 2 6 B200 on substation equipment.
SW-1279 2 1/2 6 B250
SW-1280 3 7 1/4 B300

For split swage sleeve, use prefix SWS.
SW-1281 3 1/2 8 1/4 B350
SW-1282 4 9 1/4 B400

Example: If a request for a 3” IPS
swage split sleeve grounding stud were
requested, the corresponding catalog
number would be SWS-1280.
P
U
18-SW-19 END BELL
PIPE DIMENSIONS IN INCHES SWAGE

CATALOG
SIZE
NUMBER A B C DIE
IPS
SW-1301 1 2 3 1/2 B100
SW-1303 1 1/2 2 1/2 3 1/2 B150
SW-1304 2 3 3 1/2 1/2 B200
SW-1305 2 1/2 3 3/4 3 1/2 1/2 B250
SW-1306 3 4 3/8 4 1/2 B300
SW-1307 3 1/2 5 4 1/2 B350
SW-1308 4 5 1/2 4 1/2 B400
P
U
EXPANSION SUPPORT
CHART INSTRUCTIONS

240ft.(120ft per side)----------------7”B.C.
160ft.(80ft. per side)-----------------5”B.C.
80ft. (40ft per side)-------------------3”B.C.
Find the appropriate dimension “X”.
3. “X” measurement to be taken with the end plugs

installed.
 (Extended to conserve phase spacing.)

8
7.5
7
6.5
6
5.5 7" B
.C.
"X" (INCHES)
5
4.5
5" B
4 .C.
3.5
3
2.5 3" B.C.
2
1.5
1
0.5
0
-20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170
P
U
EXPANSION TERMINAL
CHART INSTRUCTIONS


less than 140ft.
4.5
3.5
3
"X" (INCHES)
2.5
1.5
0.5
0
-20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170
PRODUCT DESIGN UTILITY • Manufactured by: Pattern & Foundry, Inc.

EXPANSION COUPLER
CHART INSTRUCTIONS


less than 140ft.

4.5
3.5
3
"X" (INCHES)
2.5
1.5
0.5
0
-20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

P
U
BRONZE BUS SUPPORTS SECTION
PEDESTAL TYPE 19-1


DIMENSIONS
CATALOG MOUNTING PIPE SIZE IN INCHES
NUMBER BOLT CIRCLE IPS A heavy duty connector for joining a pipe
A K bus to an insulator cap, the type RFSS
19-101 3 1/2 1 3/4 3/8 combines the rugged durability of its
19-102 5 1/2 2 1/8 3/8 copper alloy casting with the strength
19-103 3 3/4 2 1/2 and resistance to corrosion of its silicon
19-104 5 3/4 2 1/4 1/2
19-105 3 1 2 1/2 bronze clamping hardware.
19-106 5 1 2 1/4 1/2 Steel galvanized bolts and lockwashers
19-107 3 1 1/4 2 1/4 1/2 are included for mounting to the insulator
19-108 5 1 1/4 2 3/8 1/2
cap. All bolt heads are recessed for single
19-109 3 1 1/2 2 1/2 1/2
19-110 5 1 1/2 2 1/2 1/2 wrench installation.
19-111 3 2 2 3/4 1/2 For rotation and angular adjustment, the
19-112 5 2 2 3/4 1/2 base of the bus support features eight
19-113 3 2 1/2 3 1/8 5/8
19-114 5 2 1/2 3 1/8 5/8 holes. An added feature of this connector
19-115 3 3 3 5/8 5/8 is the reversible bus support cap to allow
19-116 5 3 3 5/8 5/8 for either slip or tight-fit applications.
19-117 3 3 1/2 4 5/8
Static springs standard.
19-118 5 3 1/2 4 5/8
19-119 3 4 4 1/2 5/8
19-120 5 4 4 1/2 5/8
19-121 3 4 1/2 4 7/8 5/8
19-122 5 4 1/2 4 7/8 5/8
19-123 3 5 5 5/8
19-124 5 5 5 5/8
19-125 3 6 5 1/2 5/8
19-126 5 6 5 1/2 5/8
P
U
SECTION ALUMINUM BUS SUPPORTS
19-1A PEDESTAL TYPE


DIMENSIONS
NUMBER BOLT CIRCLE IPS
A K
19-127 3 1/2 1 3/4 1/2
Cast of a lightweight aluminum alloy, 19-128 5 1/2 2 1/8 1/2
the type ARFSS connects a bus to an 19-129 3 3/4 2 1/2
insulator cap and includes bolts, nuts, 19-130 5 3/4 2 1/4 1/2
19-131 3 1 2 1/2
and lockwashers of high tensile
19-132 5 1 2 1/4 1/2
aluminum for clamping efficiency 19-133 3 1 1/4 2 1/4 1/2
and resistance to corrosion. 19-134 5 1 1/4 2 3/8 1/2
19-135 3 1 1/2 2 1/2 1/2
All bolt heads are captivated for single
19-136 5 1 1/2 2 1/2 1/2
wrench installation. Steel galvanized 19-137 3 2 2 3/4 1/2
bolts and lockwashers are included 19-138 5 2 2 3/4 1/2
for mounting to the insulator cap. 19-139 3 2 1/2 3 1/8 5/8
19-140 5 2 1/2 3 1/8 5/8
The base of the bus support features 19-141 3 3 3 5/8 5/8
eight holes for rotation and angular 19-142 5 3 3 5/8 5/8
adjustment. A special feature of this 19-143 3 3 1/2 4 5/8
connector is the reversible bus 19-144 5 3 1/2 4 5/8
support cap which permits either 19-145 3 4 4 1/2 5/8
19-146 5 4 4 1/2 5/8
slip or tight fit applications.
19-147 3 4 1/2 4 7/8 5/8
Static spring is standard. 19-148 5 4 1/2 4 7/8 5/8
19-149 3 5 5 5/8
19-150 5 5 5 5/8
19-151 3 6 5 1/2 5/8
19-152 5 6 5 1/2 5/8
Example:
For a 7” bolt circle, add the
descriptor “7BC” into the
product number.
EX: 19-152-7BC
P
U
BRONZE BUS SUPPORTS SECTION
OPEN BASES 19-2
DIMENSIONS
For joining a bus to an insula-
CATALOG MOUNTING PIPE SIZE IN INCHES tor cap, the type BFSS proves
NUMBER BOLT CIRCLE IPS a durable connector because
A K L W
19-155 3 3/4 2 1/2 7 3 1/4
of its high strength copper al-
19-156 5 3/4 2 1/4 1/2 9 1/2 3 1/2 loy casting.
19-157 3 1 2 1/2 7 1/4 3
19-158 5 1 2 1/4 1/2 9 3/4 3 1/4 Clamping hardware of silicon
19-159 3 1 1/4 2 1/4 1/2 7 1/2 3 1/2 bronze enhances its strength
19-160 5 1 1/4 2 3/8 1/2 9 1/4 3 1/2
and resistance to wear in the
19-161 3 1 1/2 2 1/2 1/2 8 4 1/2
19-162 5 1 1/2 2 1/2 1/2 9 1/4 4 field.
19-163 3 2 2 3/4 1/2 9 1/4 4 3/4
19-164 5 2 2 3/4 1/2 9 1/4 4 3/4 To facilitate installation, all
19-165 3 2 1/2 3 1/8 5/8 7 1/2 6 bolt heads are recessed. Also
19-166 5 2 1/2 3 1/8 5/8 9 1/4 5 included are steel galvanized
19-167 3 3 3 5/8 5/8 9 1/4 5
19-168 5 3 3 5/8 5/8 11 6 1/4
bolts and lockwashers for
19-169 3 3 1/2 4 5/8 9 1/2 8 1/2 mounting to the insulator cap.
19-170 5 3 1/2 4 5/8 11 1/2 8 1/2
19-171 3 4 4 1/2 5/8 11 8 1/2 For rotation and angular ad-
19-172 5 4 4 1/2 5/8 11 8 1/2 justment, the base of the bus
19-175 3 5 5 5/8 11 9 1/4
support features eight holes.
19-176 5 5 5 5/8 11 9 1/4
19-177 3 6 5 1/2 5/8 11 1/2 10 3/4
Another feature of this
19-178 5 6 5 1/2 5/8 11 1/2 10 3/4 connector is the reversible bus
support cap which allows for
either slip or tight-fit applica-
tions.
Static spring is standard.
P
U
SECTION ALUMINUM BUS SUPPORTS
19-2A OPEN BASES
DIMENSIONS
NUMBER BOLT CIRCLE IPS
A K L W
19-181 3 3/4 2 1/2 7 3 1/4
Connecting a bus to an insulator
19-182 5 3/4 2 1/4 1/2 9 1/2 3 1/2
cap can be accomplished with ease 19-183 3 1 2 1/2 7 1/4 3
and efficiency using the type AFSS. 19-184 5 1 2 1/4 1/2 9 3/4 3 1/4
A connector made of a lightweight 19-185 3 1 1/4 2 1/4 1/2 7 1/2 3 1/2
aluminum alloy, it includes high 19-186 5 1 1/4 2 3/8 1/2 9 1/4 3 1/2
strength aluminum clamping hard- 19-187 3 1 1/2 2 1/2 1/2 8 4 1/2
ware for dependability and steel 19-188 5 1 1/2 2 1/2 1/2 9 1/4 4
galvanized bolts and lockwashers 19-189 3 2 2 3/4 1/2 9 1/4 4 3/4
for proper mounting to the insula- 19-190 5 2 2 3/4 1/2 9 1/4 4 3/4
19-191 3 2 1/2 3 1/8 5/8 9 1/4 5
tor cap. Recessed bolt heads allow
19-192 5 2 1/2 3 1/8 5/8 9 1/4 5
single wrench installation. 19-193 3 3 3 5/8 1/2 7 1/2 6
The base of the bus support has 19-194 5 3 3 5/8 1/2 11 6 1/4
eight holes for rotation and angular 19-195 3 3 1/2 4 5/8 9 1/2 8 1/2
adjustment. Another feature of this 19-196 5 3 1/2 4 5/8 11 1/2 8 1/2
19-197 3 4 4 1/2 5/8 11 8 1/2
connector is the reversible bus
19-198 5 4 4 1/2 5/8 11 8 1/2
support cap which permits either 19-201 3 5 5 5/8 11 9 1/4
slip or tight-fit applications. 19-202 5 5 5 5/8 11 9 1/4
Static spring is standard. 19-203 3 6 5 1/2 5/8 11 1/2 10 3/4
19-204 5 6 5 1/2 5/8 11 1/2 10 3/4
Example:
product number.
EX: 19-204-7BC
P
U
BRONZE/ALUMINUM BUS SECTION
SUPPORTS SINGLE RING 19-3
A reliable connector for joining a bus to an insulator

BRONZE cap, the type BSB is cast of a high strength copper
BUS SUPPORTS SINGLE RING alloy and is used in slip fit applications.
PIPE DIMENSIONS
CATALOG MOUNTING
SIZE IN INCHES This connector includes steel galvanized bolts and
NUMBER BOLT CIRCLE lockwashers for proper mounting to the insulator cap.
IPS A
19-205 3 1/2 1 3/4
19-206 5 1/2 2 1/8
To allow rotation and angular adjustment,
19-207 3 3/4 2 the base of the bus support has eight holes.
19-208 5 3/4 2 1/4
19-209 3 1 2
19-210 5 1 2 1/4
19-211 3 1 1/4 2 1/4
19-212 5 1 1/4 2 3/8
19-213 3 1 1/2 2 1/2
19-214 5 1 1/2 2 1/2
19-215 3 2 2 3/4
19-216 5 2 2 3/4
19-217 3 2 1/2 3 1/8
19-218 5 2 1/2 3 1/8
19-219
19-220
3
5
3
3
3 5/8
3 5/8
ALUMINUM
19-221 3 3 1/2 4 BUS SUPPORTS SINGLE RING
19-222 5 3 1/2 4
19-223 3 4 4 1/2 PIPE DIMENSIONS
CATALOG MOUNTING IN INCHES
19-224 5 4 4 1/2 SIZE
NUMBER BOLT CIRCLE
19-225 3 4 1/2 4 7/8 IPS A
19-226 5 4 1/2 4 7/8 19-231 3 1/2 1 3/4
19-227 3 5 5 19-232 5 1/2 2 1/8
19-228 5 5 5 19-233 3 3/4 2
19-229 3 6 5 1/2 19-234 5 3/4 2 1/4
19-230 5 6 5 1/2 19-235 3 1 2
19-236 5 1 2 1/4
The rugged aluminum type 19-237 3 1 1/4 2 1/4
19-238 5 1 1/4 2 3/8
ASB joins a bus to an insulator 19-239 3 1 1/2 2 1/2
cap for slip fit applications. 19-240 5 1 1/2 2 1/2
19-241 3 2 2 3/4
Included are steel galvanized 19-242 5 2 2 3/4
bolts and lockwashers for proper 19-243 3 2 1/2 3 1/8
19-244 5 2 1/2 3 1/8
mounting to the insulator cap. 19-245 3 3 3 5/8
19-246 5 3 3 5/8
The base of the bus support has 19-247 3 3 1/2 4
eight holes to permit rotation 19-248 5 3 1/2 4
19-249 3 4 4 1/2
and angular adjustment. 19-250 5 4 4 1/2
19-251 3 4 1/2 4 7/8
Static spring is standard. 19-252 5 4 1/2 4 7/8
Example:
19-253 3 5 5
For a 7” bolt circle, add the 19-254 5 5 5
descriptor “7BC” into the 19-255 3 6 5 1/2
product number. 19-256 5 6 5 1/2
EX: 19-256-7BC P
U
SECTION ALUMINUM
19-4 BUS SUPPORTS HOOK-ON
C
B
DIMENSIONS IN
CATALOG MOUNTING PIPE SIZE INCHES
NUMBER BOLT CIRICLE IPS
A C B
19-339 3 1 2 6 1/2 3/8
Connecting a bus to an insulator cap 19-340 5 1 2 1/4 8 3/8
can be accomplished with ease and 19-341 3 1 1/4 2 1/2 7 1/4 9/16
efficiency using the type AFSS. 19-342 5 1 1/4 2 3/8 9 3/4 5/8
19-343 3 1 1/2 2 1/2 7 1/4 9/16
A connector made of a lightweight
19-344 5 1 1/2 2 1/2 9 3/4 5/8
aluminum alloy, it includes high
19-345 3 2 2 3/4 7 1/4 9/16
strength aluminum clamping 19-346 5 2 2 3/4 9 3/4 5/8
hardware for dependability 19-347 3 2 1/2 3 1/8 7 1/4 9/16
and steel galvanized bolts and 19-348 5 2 1/2 3 1/8 9 3/4 5/8
lockwashers for proper mounting 19-349 3 3 3 5/8 7 1/4 9/16
to the insulator cap. 19-350 5 3 3 5/8 9 3/4 5/8
19-351 3 3 1/2 4 7 1/4 9/16
Recessed bolt heads allow single
19-352 5 3 1/2 4 9 3/4 5/8
wrench installation. 19-353 3 4 4 1/2 7 1/4 9/16
The base of the bus support 19-354 5 4 4 1/2 9 3/4 5/8
has eight holes for rotation and 19-354-7BC 7 4 4 1/2 12 1/4 9/16
19-357 3 5 5 10 1/2
angular adjustment.
19-358 5 5 5 9 3/4 5/8
Static spring is standard. 19-358-7BC 7 5 5 12 1/4 9/16
19-359 3 6 5 1/2 10 1/2
19-360 5 6 5 1/2 9 3/4 5/8
19-360-7BC 7 6 5 1/2 12 1/4 9/16
P
U
ALUMINUM WELDMENT CONNECTORS
 SECTION
OPEN BASE BUS SUPPORT 19-5






DIMENSIONS


NUMBER BOLT CIRICLE IPS
A C B

 
Cast of a lightweight and


 
19-1225 3 1 2 6 1/2 3/8 
corrosion resistant aluminum

  

19-1226 5 1 2 1/4 8 3/8


  
  
alloy, the type WBS features

   
19-1227 3 1 1/4 2 1/4 7 1/4 9/16


 
  
19-1228 5 1 1/4 2 3/8


9 3/4 5/8

eight holes 
for rotation and 

19-1229 3 1 1/2 
2 1/2 7 1/4 9/16 angular adjustment.
19-1230 5 1 1/2 

2 1/2 9 3/4 5/8
19-1231 3 2

2 3/4
 7 1/4 9/16
Steel galvanized bolts and

19-1232 5 2 2 3/4

 9 3/4
 
5/8 lockwashers are included for


mounting to the insulator cap.

 
 

19-1233 3 2 1/2
 


3 1/8

7 1/4

 
9/16 

19-1234 5 2 1/2 3 1/8 9 3/4 5/8

 
19-1235 3 3 3 5/8 7 1/4 9/16
19-1236 5 3 3 5/8 9 3/4 5/8
19-1237 3 3 1/2 4 7 1/4 9/16
19-1238 5 3 1/2 4 9 3/4 5/8
19-1239 3 4 4 1/2 7 1/4 9/16
19-1240 5 4 4 1/2 9 3/4 5/8
19-1240-7BC 7 4 4 1/2 12 1/4 9/16
19-1243 3 5 5 10 1/2
19-1244 5 5 5 9 3/4 5/8
19-1244-7BC 7 5 5 12 1/4 9/16
19-1245 3 6 5 1/2 10 1/2
19-1246 5 6 5 1/2 9 3/4 5/8
19-1246-7BC 7 6 5 1/2 12 1/4 9/16
P
U
SECTION BRONZE / ALUMINUM
19-6 CABLE BUS SUPPORTS
K
A
Bronze Cable Bus Supports:
The type CSB also features high-
BRONZE CABLE BUS SUPPORTS
strength silicon bronze clamping CABLE SIZE DIMENSIONS
CATALOG MOUNTING BOLT IN INCHES
hardware for strength and NUMBER CIRCLE AWG MCM
resistance to corrosion. MIN MAX A K
All bolt heads are captivated to 19-387* 3 8 600 1 7/8 3/8

permit single-wrench installation. 19-388* 5 8 600 1 7/8 3/8
19-389* 3 4/0 1000 2 1/4 1/2
For purposes of rotation and 19-390* 5 4/0 1000 2 5/8 1/2
angular adjustment, the base of 19-391 3 1000 1500 2 3/8 1/2
the bus support has eight holes. 19-392 5 1000 1500 2 3/8 1/2
Steel galvanized bolts and lock- 19-393 3 1000 2000 2 5/8 1/2
washers are included for mount- 19-394 5 1000 2000 2 5/8 1/2
ing to insulator.
Wide range reversible

caps are denoted by: *
ALUMINUM CABLE BUS SUPPORTS

AAC ACSR DIMENSIONS
CATALOG MOUNTING CABLE SIZE CABLE SIZE IN INCHES
Aluminum Cable Bus Supports: NUMBER BOLT CIRCLE AWG MCM AWG MCM
MIN MAX MIN MAX A K
The type ASB features clamping 19-399* 3 4 954 4 795 2 1/2 1/2
hardware made of high tensile 19-400* 5 4 954 4 795 2 3/4 1/2
aluminum for resistance to corro- 19-403* 3 4/0 2000 4/0 1590 3 1/2
sion and recessed bolt heads for 19-404* 5 4/0 2000 4/0 1590 3 1/4 5/8
single wrench installation. 19-404-SP
5 2000 2500 1780 2312 3 1/4 5/8
(2500AAC)
Steel galvanized bolts and lock-
washers are included for mounting Example:
the connector to the insulator cap. For a 7” bolt circle, add
The eight holes in the base of the the descriptor “7BC”
into the product number.
bus support permit rotation and EX: 19-404-7BC
angular adjustment.
P
U
BRONZE / ALUMINUM SECTION
DOUBLE CABLE BUS SUPPORTS 19-6-2CND
K
The type CSB features high-

BRONZE BUS SUPPORTS DOUBLE CABLE strength silicon bronze clamping hard-
CABLE SIZE DIMENSIONS ware for strength and resistance to
CATALOG MOUNTING BOLT IN INCHES corrosion.
NUMBER CIRCLE AWG MCM
MIN MAX A K
19-387-2COND 3 8 600 2 3/8 3/8
All bolt heads are captivated to permit
19-388-2COND 5 8 600 2 1/4 3/8 single-wrench installation.
19-389-2COND 3 4 1000 2 3/4 1/2 For purposes of rotation and angular
19-390-2COND 5 4 1000 3 1/2 adjustment, the base of the bus
19-391-2COND 3 1000 1500 2 1/2 1/2 support has eight holes.
19-392-2COND 5 1000 1500 2 3/8 1/2
19-393-2COND 3 1000 2000 3 1/2 1/2
19-394-2COND 5 1000 2000 3 1/2 1/2 washers are included for mounting
to insulator.
ALUMINUM BUS SUPPORTS DOUBLE CABLE

AAC ACSR DIMENSIONS
MOUNTING CABLE SIZE CABLE SIZE
CATALOG IN INCHES For a 7” bolt circle, add the
BOLT
NUMBER CIRCLE AWG MCM AWG MCM descriptor “7BC” into the
MIN MAX MIN MAX A K
product number.
19-399-2COND 3 4 954 4 795 3 1/2
EX: 19-404-2COND-7BC
19-400-2COND 5 4 954 4 795 3 1/4 1/2
19-403-2COND 3 4/0 2000 795 1590 3 1/4 5/8
19-404-2COND 5 4/0 2000 795 1590 3 1/2 5/8
The type ASB features clamping hardware made of high tensile aluminum for
resistance to corrosion and recessed bolt heads for single wrench installation.
Steel galvanized bolts and lockwashers are included for mounting the con-
nector to the insulator cap. The eight holes in the base of the bus support
permit rotation and angular adjustment.
P
U
19-7 VERTICAL BUS SUPPORT
B.C.
A
MOUNTING DIMENSIONS
CATALOG PIPE IPS IN INCHES
BOLT
NUMBER SIZE
CIRCLE A
19-1247 3 1/2 1
Dependable because of 19-1248 5 1/2 1
its corrosion resistant 19-1249 3 3/4 1
aluminum casting, the type 19-1250 5 3/4 1
WESP is supplied with 19-1251 3 1 1
steel galvanized bolts and 19-1252 5 1 1
lockwashers for mounting 19-1253 3 1 1/4 1 1/8
to the insulator cap. 19-1254 5 1 1/4 1 1/8
19-1255 3 1 1/2 1 1/8
19-1256 5 1 1/2 1 1/8
19-1257 3 2 1 3/4
19-1258 5 2 1 3/4
19-1259 3 2 1/2 1 3/4
19-1260 5 2 1/2 2
19-1261 3 3 2
19-1262 5 3 2
19-1263 3 3 1/2 2
19-1264 5 3 1/2 2
19-1265 3 4 2 1/2
19-1266 5 4 2 1/2
19-1267 3 4 1/2 2 1/2
19-1268 5 4 1/2 2 1/2
19-1269 3 5 2 5/8
19-1270 5 5 2 5/8
19-1271 3 6 3
19-1272 5 6 3
Example:
For a 7” bolt circle, add
the descriptor “7BC”
EX: 19-1272-7BC
P
U
VERTICAL BUS SUPPORT 19-SW-7
CATALOG MOUNTING PIPE SIZE DIMENSIONS IN INCHES SWAGE

NUMBER BOLT CIRCLE IPS A DIE
SW-1251 3 1 2 1/2 B100

SW-1252 5 1 2 1/2 B100
SW-1255 3 1 1/2 2 1/2 B150

SW-1256 5 1 1/2 2 1/2 B150
SW-1257 3 2 3 B200
SW-1258 5 2 3 B200
SW-1259 3 2 1/2 3 B250

SW-1260 5 2 1/2 3 B250
SW-1261 3 3 3 1/2 B300 The dependable swage vertical bus

SW-1262 5 3 3 1/2 B300 support is made from corrosion-
SW-1263 3 3 1/2 3 1/2 B350 resistant aluminum, and comes
SW-1264 5 3 1/2 3 1/2 B350
equipped with steel galvanized bolts
SW-1265 3 4 3 1/2 B400
and lock washers for mounting the
SW-1266 5 4 3 1/2 B400
bus to the insulator cap.
Example: For a 7” bolt circle, add the

suffix 7BC to the 5BC catalog number.
If a 7” bolt circle were requested for 4”
IPS, the corresponding catalog
number would be SW-1266-7BC.
P
U
SECTION BRONZE BUS SUPPORTS
19-8 VERTICAL PIPE
PIPE DIMENSIONS
IPS
NUMBER BOLT CIRCLE
SIZE A B K
Cast of high strength bronze, the 19-409 3 1/2 2 7/8 1/2 3/8
type BBSP joins a vertical pipe to 19-410 5 1/2 2 7/8 1/2 3/8
an insulator cap. It includes bolts, 19-411 3 3/4 2 7/8 1/2 1/2
nuts, and lockwashers of silicon 19-412 5 3/4 2 7/8 1/2 1/2
bronze for clamping efficiency 19-413 3 1 3 1/8 1/2 1/2
and resistance to corrosion. 19-414 5 1 3 1/8 1/2 1/2
Steel galvanized bolts and lock- 19-415 3 1 1/4 3 1/8 1/2 1/2
washers are provided for mounting 19-416 5 1 1/4 3 1/8 1/2 1/2
the bus support to the cap. 19-417 3 1 1/2 3 1/8 1/2 1/2
19-418 5 1 1/2 3 1/8 1/2 1/2
19-419 3 2 3 1/8 1/2 1/2
19-420 5 2 3 1/8 1/2 1/2
19-421 3 2 1/2 4 1/2 5/8
19-422 5 2 1/2 4 1/2 5/8
19-423 3 3 4 1/2 5/8
19-424 5 3 4 1/2 5/8
19-425 3 3 1/2 3 3/4 1/2 5/8
19-426 5 3 1/2 3 3/4 1/2 5/8
19-427 3 4 4 5/8 1/2 5/8
19-428 5 4 4 5/8 1/2 5/8
19-429 3 4 1/2 4 3/4 1/2 5/8
19-430 5 4 1/2 4 3/4 1/2 5/8
19-431 3 5 5 1/2 5/8
19-432 5 5 5 1/2 5/8
19-433 3 6 6 1/2 5/8
19-434 5 6 6 1/2 5/8
P
U
ALUMINUM BUS SUPPORTS SECTION
VERTICAL PIPE 19-8A
PIPE DIMENSIONS
IPS
NUMBER BOLT CIRCLE SIZE A B K
19-435 3 1/2 2 7/8 1/2 1/2 An efficient means of joining
19-436 5 1/2 2 7/8 1/2 1/2 a vertical pipe to an insulator
19-437 3 3/4 2 7/8 1/2 1/2 cap, the type ABSP made of
19-438 5 3/4 2 7/8 1/2 1/2 a lightweight aluminum alloy
19-439 3 1 3 1/8 1/2 1/2 features high-tensile aluminum
19-440 5 1 3 1/8 1/2 1/2 clamping hardware for resistance
19-441 3 1 1/4 3 1/8 1/2 1/2 to corrosion.
19-442 5 1 1/4 3 1/8 1/2 1/2
Steel galvanized bolts and l
19-443 3 1 1/2 3 1/8 1/2 1/2
ockwashers are provided for
19-444 5 1 1/2 3 1/8 1/2 1/2
mounting the connector to the
19-445 3 2 3 1/8 1/2 1/2
insulator cap.
19-446 5 2 3 1/8 1/2 1/2
19-447 3 2 1/2 3 7/8 1/2 5/8 Recessed bolt heads on the
19-448 5 2 1/2 3 7/8 1/2 5/8 bus support itself help facilitate
19-449 3 3 4 1/2 5/8 installation.
19-450 5 3 4 1/2 5/8
19-451 3 3 1/2 3 3/4 1/2 5/8
19-452 5 3 1/2 3 3/4 1/2 5/8
19-453 3 4 4 1/2 1/2 5/8
19-454 5 4 4 5/8 1/2 5/8
19-455 3 4 1/2 4 3/4 1/2 5/8 Example:
19-456 5 4 1/2 4 3/4 1/2 5/8 For a 7” bolt circle, add
19-457 3 5 5 1/2 5/8 the descriptor “7BC”
19-458 5 5 5 1/2 5/8
EX: 19-460-7BC
19-459 3 6 6 1/2 5/8
19-460 5 6 6 1/2 5/8
P
U
SECTION BRONZE BUS SUPPORTS 
19-9 COUPLER SUPPORT

 


  

PIPE DIMENSIONS
IPS
 NUMBER BOLT CIRCLE SIZE A B K
Featuring a copper alloy for high 19-513 3 1/2 1 3/4 5 5/8 3/8
conductivity and natural resistance to 19-514 5 1/2 2 1/8 5 5/8 3/8
corrosion and stress, the type BCS 19-515 3 3/4 2 5 5/8 3/8
acts as a combination bus support 19-516 5 3/4 2 1/4 5 5/8 3/8
and coupler for tubing of the same 19-517 3 1 2 6 3/8
size. Bolts, nuts, and lockwashers 19-518 5 1 2 1/4 6 3/8
of silicon bronze insure maximum 19-519 3 1 1/4 2 1/4 6 1/4 1/2
clamping efficiency. 19-520 5 1 1/4 2 3/8 6 1/4 1/2
19-521 3 1 1/2 2 1/2 6 1/4 1/2
19-522 5 1 1/2 2 1/2 6 1/4 1/2
washers are provided for mounting
19-523 3 2 2 3/4 6 1/2 1/2
the bus support to the insulator cap.
19-524 5 2 2 3/4 6 1/2 1/2
To facilitate installation, all bolt heads
19-525 3 2 1/2 3 1/8 7 5/8 1/2
are captivated.
19-526 5 2 1/2 3 1/8 7 5/8 1/2
The eight holes at the base of the bus 19-527 3 3 3 5/8 7 3/4 5/8
support permit rotation and angular 19-528 5 3 3 5/8 7 3/4 5/8
adjustment whenever necessary. 19-530 5 3 1/2 4 8 5/8
19-532 5 4 4 1/2 9 1/4 5/8
19-536 5 5 5 10 1/2 5/8
19-538 5 6 5 1/2 12 5/8
P
U
ALUMINUM BUS SUPPORTS 
SECTION
COUPLER SUPPORT 19-9A
 


 


PIPE DIMENSIONS
 IPS
NUMBER BOLT CIRCLE A B K
SIZE
19-539 3 1/2 1 3/4 5 5/8 1/2 Made of a high conductivity lightweight
19-540 5 1/2 2 1/8 5 5/8 1/2 aluminum alloy, the type AC S acts as
19-541 3 3/4 2 5 5/8 1/2 a combination bus support and coupler
19-542 5 3/4 2 1/4 5 5/8 1/2 for pipe of the same size. Bolts, nuts,
19-543 3 1 2 6 1/2 and lockwashers of high-tensile
19-544 5 1 2 1/4 6 1/2 aluminum insure clamping efficiency
19-545 3 1 1/4 2 1/4 5 5/8 1/2 and resistance to wear in the field.
19-546 5 1 1/4 2 3/8 5 5/8 1/2 Steel galvanized bolts and lockwashers
19-547 3 1 1/2 2 1/2 6 1/4 1/2 are provided to guarantee strong
19-548 5 1 1/2 2 1/2 6 1/4 1/2 mounting to the insulator cap.
19-549 3 2 2 3/4 6 1/2 1/2
19-550 5 2 2 3/4 6 1/2 1/2
To permit single wrench installation,
19-551 3 2 1/2 3 1/8 7 5/8 5/8
all bolt heads on the bus support itself
19-552 5 2 1/2 3 1/8 7 5/8 5/8
are captivated.
19-553 3 3 3 5/8 7 5/8 For purposes of rotation and angular
19-554 5 3 3 5/8 7 5/8 adjustment, the base of the bus sup-
19-556 5 3 1/2 4 7 1/2 5/8 port features eight holes.
19-558 5 4 4 1/2 9 1/8 5/8
19-562 5 5 5 10 1/2 5/8
19-564 5 6 5 1/2 11 7/8 5/8
Example:
product number.
EX: 19-564-7BC
P
U
SECTION BRONZE BUS SUPPORTS
19-10 SLIDING COUPLER SUPPORT
DIMENSIONS
CATALOG MOUNTING PIPE IPS IN INCHES
NUMBER BOLT CIRCLE SIZE
Useful in long runs of tubing A K
bus, the type BSCS effectively 19-1293 3 1/2 1 3/4 3/8
protects the insulator it is mounted 19-1294 5 1/2 2 1/8 3/8
on from the expansion and 19-1295 3 3/4 2 1/2
contraction pressures due to tem- 19-1296 5 3/4 2 1/4 1/2
perature variations. 19-1297 3 1 2 1/2
19-1298 5 1 2 1/4 1/2
In addition, the connector cast of
19-1299 3 1 1/4 2 1/4 1/2
high strength copper alloy couples
19-1300 5 1 1/4 2 3/8 1/2
tubing of the same size. It features
19-1301 3 1 1/2 2 1/2 1/2
corrosion-resistant silicon bronze
19-1302 5 1 1/2 2 1/2 1/2
clamping hardware and captivated
19-1303 3 2 2 3/4 1/2
bolt heads for installation.
19-1304 5 2 2 3/4 1/2
Steel galvanized bolts and lock- 19-1305 3 2 1/2 3 1/8 5/8
washers are included for mounting 19-1306 5 2 1/2 3 1/8 5/8
the bus support to its insulator cap. 19-1307 3 3 3 5/8 5/8
For purposes of rotation and angular 19-1308 5 3 3 5/8 5/8
adjustment, the base of the bus 19-1309 3 3 1/2 4 5/8
support has eight holes. 19-1310 5 3 1/2 4 5/8
19-1311 3 4 4 1/2 5/8
19-1312 5 4 4 1/2 5/8
19-1315 3 5 5 5/8
19-1316 5 5 5 5/8
P
U
ALUMINUM BUS SUPPORTS SECTION
SLIDING COUPLER SUPPORT 19-10A
DIMENSIONS
CATALOG MOUNTING PIPE IN INCHES
NUMBER BOLT CIRCLE SIZE IPS
A B Particularly useful in long runs of pipe
19-1319 3 1/2 1 3/4 1/2 bus, the type ASCS couples tubing of
19-1320 5 1/2 2 1/8 1/2 the same size and effectively protects
19-1321 3 3/4 2 1/2 the insulator it is mounted on from the
19-1322 5 3/4 2 1/4 1/2 expansion and contraction pressures
19-1323 3 1 2 1/2 due to temperature variations.
19-1324 5 1 2 1/4 1/2 Made of a durable, lightweight alumi-
19-1325 3 1 1/4 2 1/4 1/2 num alloy, it includes bolts,nuts, and
19-1326 5 1 1/4 2 3/8 1/2 lockwashers of high-tensile aluminum
19-1327 3 1 1/2 2 1/2 1/2 to insure clamping efficiency and
19-1328 5 1 1/2 2 1/2 1/2 resistance to corrosion in the field.
19-1329 3 2 2 3/4 1/2
For mounting to the insulator cap,
19-1330 5 2 2 3/4 1/2
steel galvanized bolts and lockwash-
19-1331 3 2 1/2 3 1/8 5/8
ers are provided. All bolt heads are
19-1332 5 2 1/2 3 1/8 5/8
captivated to allow
19-1333 3 3 3 5/8 5/8
for single wrench installation.
19-1334 5 3 3 5/8 5/8
19-1335 3 3 1/2 4 5/8 To facilitate any necessary rotation
19-1336 5 3 1/2 4 5/8 or angular adjustment, the base of
19-1337 3 4 4 1/2 5/8 the bus support features eight holes.
19-1338 5 4 4 1/2 5/8
19-1341 3 5 5 5/8
19-1342 5 5 5 5/8
19-1344 5 6 5 1/2 5/8
Example:
product number.
EX: 19-1342-7BC
P
U
SECTION GALVANIZED STEEL BUS
19-11 SUPPORTS HEIGHT ADAPTER
Made of galvanized steel, the CATALOG MOUNTING INCHES

type S is used where increased NUMBER BOLT CIRCLE
H
clearance is required or where
19-1709* 3 2
adjustments are necessary to
19-1710* 5 2
compensate for height variations
19-1711 3 2 1/2
in existing structures.
19-1712 5 2 1/2
19-1713 3 3
*Height adaptors
19-1714 5 3
For a height adapter using the 2” high and below
19-1715 3 3 1/2
same size bolt circle, use the suf- are made out
19-1716 5 3 1/2
fix “SP(H)”. of a solid puck
19-1717 3 4
to ensure easy
19-1718 5 4
For example: A 5” bolt circle with instalation.
19-1719 3 4 1/2
a height of 8” the part number 19-1720 5 4 1/2
would be:19-1724-SP(8”) 19-1721 3 5
19-1722 5 5
19-1723 3 6
19-1724 5 6
Where it is desirable to transition form one bolt circle

diameter to another the following syntax may be used:
BCA-(H)-(BC1)-(BC2)
The three variables are the height (H), bolt circle 1
(BC1), and bolt circle 2 (BC2). The height is expressed
as a multiple of 10.
For example if the desired height is 3” H=30, similarly
if the desired height is 4.5” H=45.
The part number for a bolt circle adapter that is 4” high
and connects a 5” bolt circle to a 3” bolt circle would
read BCA-40-5-3.
P
U
BRONZE / ALUMINUM PARALLEL SECTION
CONNECTORS CABLE TO CABLE 110-1
 
BRONZE
PARALLEL CONNECTORS CABLE TO CABLE
Bronze Parallel Connectors
CABLE MAIN CABLE TAP DIMENSIONS
Cable to Cable: CATALOG IN INCHES No. of
The type PC which connects a NUMBER AWG MCM AWG MCM Bolts
MIN MAX MIN MAX A K
cable main parallel to a cable
tap features clamping members 110-101 4 250 4 250 3 3/8 2
made of high strength, high
110-103 250 500 250 500 3 1/4 1/2 2
conductivity copper alloy.
The bolts, nuts and lock- 110-105 500 1000 500 1000 4 1/2 1/2 3
washers are silicon bronze to
110-107 1000 1500 1000 1500 6 5/8 3
enhance clamping effciency
and resistence to corrosion. 110-110 1500 2000 1500 2000 6 1/2 5/8 3

ALUMINUM
PARALLEL CONNECTORS CABLE TO CABLE
Aluminum Parallel DIMENSIONS
CABLE MAIN CABLE TAP
Connectors Cable to Cable: CATALOG IN INCHES No. of
NUMBER AWG MCM AWG MCM Bolts
A high strength, high conduc- A K
MIN MAX MIN MAX
tivity aluminum connector for
joining a cable main parallel 110-111 4 250 4 250 3 1/2 1/2 2
to a cable tap, the type PCA
110-113 250 400 250 400 3 1/2 1/2 2
includes clamping hardware
made of high tensile aluminum 110-115 350 600 350 600 4 3/4 1/2 3
for dependibility and durability 110-117 600 900 600 900 4 1/2 1/2 3
in the field.
110-119 900 1272 900 1272 6 5/8 3
To facilitate installation, all bolt
heads are captivated. 110-121 1272 1590 1272 1590 6 5/8 3
110-123 1590 2000 1590 2000 6 1/2 5/8 3
P
U
110-1U U-BOLT CABLE CLAMPS
A B
Bronze Parallel Connectors BRONZE

Cable to Cable: PARALLEL CABLE CONNECTORS
The type PC which connnects a cable main
DIMENSIONS
parallel to a cable tap features clamping CABLE RUN CABLE TAP IN INCHES
CATALOG
members made of high strength, high
conductivity copper. U-bolts are stainless NUMBER AWG MCM AWG MCM
A B K
steel for durability in the field. MIN MAX MIN MAX
110-150-BPU 4/0 1000 4/0 350 4 3 1/2
110-151-BPU 350 1000 350 1000 4 3 1/2
Aluminum Parallel Connectors Cable to Cable:

Manufactured of a lightweight and corrosion-resistant aluminum alloy for connection two of equal or unequal parallel
cables. U-bolts are stainless steel for durability in the field.
ALUMINUM
PARALLEL CABLE CONNECTORS
ALUMINUM CABLE ACSR CABLE DIMENSIONS
CATALOG RUN TAP RUN TAP IN INCHES
NUMBER
AWG MCM AWG MCM AWG MCM AWG MCM
A B K
MIN MAX MIN MAX MIN MAX MIN MAX
110-150-APU 4 954 4 400 4 795 4 336.4 4 3 1/2
110-151-APU 450 954 450 954 397.5 795 397.5 795 4 3 1/2
P
U
CABLE SPACERS 110-1CS
Bronze Parallel Cable Spacers:

BRONZE
The type CS cable spacer connects
CABLE SPACERS a cable main parallel to a cable tap. It
DIMENSIONS features a clamping member made of
CABLE MAIN CABLE TAP
CATALOG IN INCHES high strength, high conductivity copper
NUMBER AWG MCM AWG MCM alloy. The bolts, nuts, and lockwashers
MIN MAX MIN MAX A K are silicon bronze to enhance clamping
110-101-CS* 4 250 4 250 1 1/4 3/8 efficiency and resistance to corrosion.
110-103-CS* 250 500 250 500 1 7/8 1/2 Note: To obtain a cable spacer for (2)
300 MCM copper conductors spaced at
110-105-CS* 500 1000 500 1000 2 1/8 1/2
8” add suffix “-8”
110-107-CS* 1000 1500 1000 1500 2 1/8 5/8
Example: 110-103-CS-8.
110-110-CS* 1500 2000 1500 2000 2 3/8 5/8
*Please specify cable spacing (in.)
Aluminum Parallel Cable Spacers:

A high strength, high conductivity aluminum cable spacer, the type CSA includes clamping
hardware made of high-tensile aluminum for dependability and durability in the field.
To facilitate installation, all bolt heads are captivated. Width (A) will vary with length.
ALUMINUM
CABLE SPACERS
AAC ACSR DIMENSIONS
CATALOG AWG OR MCM AWG OR MCM IN INCHES
NUMBER
MIN-MAX MIN-MAX A K
110-111-CS* 4-250(37) 4(6/1)-4/0(6/1) 1 3/4 1/2

110-113-CS* 250(7)-400(37) 4/0(6/1)-336.4(26/7) 1 3/4 1/2
110-115-CS* 350(19)-600(61) 336.4(18/1)-477(30/7) 1 3/4 1/2
110-117-CS* 600(61)-900(61) 556.5(18/1)-795(54/7) 1 3/4 1/2
110-119-CS* 900(61)-1272(91) 715.5-1113 2 1/8 5/8
110-121-CS* 1272(61)-1590(61) 1113-1272 2 1/8 5/8
110-123-CS* 1590(61)-2000(127) 1272-1590 2 1/8 5/8
P
U
SECTION ALUMINUM SWAGE PARALLEL
110-SWC CABLE SPACERS
CS (AS REQUIRED)
ALUMINUM SWAGECABLE SPACER

AAC ACSR
CATALOG CONDUCTOR SWAGE FLAT BAR
AWG OR MCM AWG OR MCM A(DIA)
NUMBER DIAMETER DIE THICKNESS
MIN,MAX MIN,MAX
SWC100-124-CS* 1/0 1/0 .326-.398 1.00 C100 3/8
SWC100-125-CS* 2/0 2/0 .399-.447 1.00 C100 3/8
SWC100-128-CS* 3/0 3/0 .448-.502 1.00 C100 3/8
SWC100-129-CS* 4/0 4/0 .503-.563 1.00 C100 3/8
SWC125-130-CS* 266.8-300 266.8(26/7) .564-.642 1.25 C125 3/8
SWC125-134-CS* 336.4(19)-350(37) 336.4(36/1)-336.4(18/1) .643-.684 1.25 C125 3/8

SWC125-139-CS* 397.5(19)-400(37) 336.4(26/7)-397.5(18/1) .685-.743 1.25 C125 3/8
SWC150-144-CS* 450(37)-500(37) 397.5(24/7)-477(18/1) .744-.814 1.50 C150 1/2
SWC150-146-CS* 550(61)-556.5(37 477(24/7)-477(30/7) .815-.883 1.50 C150 1/2
SWC175-148-CS* 600(37)-715.5(61) 556.5(24/7)-605(26.7) .884-.953 1.75 C175 1/2
SWC188-152-CS* 750(37)-817(61) 605(26/7)-715.5(30/19) .954-1.081 1.875 C188 1/2
SWC200-161-CS* 900(37)-1000(61) 795(24/7)-874.5(54/7) 1.082-1.152 2.00 C200 1/2
SWC200-164-CS* 1033.5(37)-1113(61) 900(54/7)-954(54/7) 1.153-1.216 2.00 C200 1/2
SWC225-165-CS* 1192.5(61)-1272(61) 1033.5(54/7)-1113(54/19) 1.217-1.300 2.25 C225 3/4
SWC225-167-CS* 1400(91)-1510.5(61) 1272(45/7)-1351.5(54/19) 1.301-1.424 2.25 C225 3/4
SWC225-168-CS* 1590(61)-1700(127) 1351.5(54/19)-1510.5(45/7) 1.425-1.503 2.25 C225 3/4
SWC225-169-CS* 1750(127) 1510.5(54/19)-1590(54/19) 1.504-1.545 2.25 C225 3/4
SWC275-170-CS* 2000(91)(127) 1780(84/19) 1.546-1.659 2.75 C275 3/4
SWC275-171-CS* 2250(91)(127) 2156(84/19) 1.660-1.762 2.75 C275 3/4

SWC275-172-CS* 2500(127) 1.763-1.824 2.75 C275 3/4
For connectors requiring different cable spacing add the dimension suffix in
inches stating what center to center of the barrels is required.
A high strength, high conductivity aluminum cable spacer using a Swage

Split compression terminals have the crimping die sizes clearly marked for
9"
ease of installation.
Example: To obtain a cable spacer for (2) 1033.5(37) AAC cables with 8
inch spacing. The corresponding catalog number would be SWC200-164-
CS-8.
A
P
U
CABLE SPACERS 110-1CST
90 DEGREE
ROTATED PAD
Bronze Parallel Cable Spacer Tee:

BRONZE CABLE SPACER TEE
The type CST cable spacer tee
features clamping members made DIMENSIONS
CABLE MAIN CABLE TAP IN INCHES
of high strength, high conductivity CATALOG PAD
copper alloy. NUMBER STYLE AWG MCM AWG MCM A K
The bolts, nuts, and lockwashers are MIN MAX MIN MAX
silicon bronze for clamping efficiency 110-101-CSTB* B 4 250 4 250 1 1/4 3/8
and resistance to corrosion. Width
110-101-CSTC* C 4 250 4 250 1 1/4 3/8
(A) will very with length.
110-101-CSTD* D 4 250 4 250 1 1/4 3/8
Note: To obtain a cable spacer
110-103- 250 500 250 500 1 7/8 1/2
terminal for (2) 300 MCM copper
conductors spaced at 8 inches 110-105- 500 1000 500 1000 2 1/2
with a 4 hole NEMA pad rotated 110-107- 1000 1500 1000 1500 2 5/8
90 degree add suffix “-8 -90”.
Example: 110-103-CSTC -8-90
Aluminum Parallel Cable Spacer Tee:

A high strength, high conductivity aluminum cable spacer terminal, the type CSTA includes clamping hardware made of
high-tensile aluminum for dependability and durability in the field. To facilitate installation, all bolt heads are captivated.
ALUMINUM CABLE SPACER TEE

AAC ACSR DIMENSIONS
CATALOG AWG OR MCM AWG OR MCM IN INCHES
NUMBER
MIN-MAX MIN-MAX MIN-MAX MIN-MAX A K
110-111-CSTB* 4-250(37) 4-250(37) 4(6/1)-4/0(6/1) 4(6/1)-4/0(6/1) 1 3/4 1/2
110-111-CSTC* 4-250(37) 4-250(37) 4(6/1)-4/0(6/1) 4(6/1)-4/0(6/1) 1 3/4 1/2
110-111-CSTD* 4-250(37) 4-250(37) 4(6/1)-4/0(6/1) 4(6/1)-4/0(6/1) 1 3/4 1/2
110-113- 250(7)-400(37) 250(7)-400(37) 4/0(6/1)-336.4(26/7) 4/0(6/1)-336.4(26/7) 1 3/4 1/2
110-115- 350(19)-600(61) 350(19)-600(61) 336.4(18/1)-477(30/7) 336.4(18/1)-477(30/7) 1 3/4 1/2
110-117- 600(61)-900(61) 600(61)-900(61) 556.5(18/1)-795(54/7) 556.5(18/1)-795(54/7) 1 3/4 1/2
110-119- 900(61)-1272(91) 900(61)-1272(91) 715.5-1113 715.5-1113 2 1/8 5/8
110-121- 1272(61)-1590(61) 1272(61)-1590(61) 1113-1272 1113-1272 2 1/8 5/8
110-123- 1590(61)-2000(127) 1590(61)-2000(127) 1272-1590 1272-1590 2 1/8 5/8
Not designed for continuous full current load.
PP
DD PRODUCT DESIGN UTILITY • Manufactured by: Pattern & Foundry, Inc.
UU
BRONZE / ALUMINUM SECTION
INTERNAL CORONA BELLS 111-1
BRONZE
INTERNAL CORONA BELLS
IPS SCH 80 DIMENSIONS
PIPE IN INCHES
CATALOG CATALOG Bronze Internal Corona Bells:
SIZE
NUMBER NUMBER A Designed for a drive fit as the only
111-101 111-102 1/2 3/4 means of connecting them to the
111-103 111-104 3/4 3/4 pipe, the types BCBI and BCBIH are
111-105 111-106 1 3/4 primarily used for sealing off tubes
111-107 111-108 1 1/4 1 and for corona reduction if it is found
111-109 111-110 1 1/2 1 1/4 necessary. They are made of high
111-111 111-112 2 1 1/4 strength copper alloy.
111-113 111-114 2 1/2 1
111-115 111-116 3 1 1/2
111-117 111-118 3 1/2 1 1/2
111-119 111-120 4 1 1/2 
111-121 111-122 4 1/2 2
111-123 111-124 5 2
111-125 111-126 6 2
ALUMINUM
INTERNAL CORONA BELLS
IPS SCH 80 DIMENSIONS
PIPE IN INCHES
CATALOG CATALOG
NUMBER NUMBER
SIZE Aluminum Internial Corona Bells:
A
111-127 111-128 1/2 3/4
Made of a lightweight, high strength
111-129 111-130 3/4 3/4
aluminum alloy, the types ACBI and
111-131 111-132 1 3/4
ACBIH are designed for a drive fit as
111-133 111-134 1 1/4 1
the only means of connecting them to
111-135 111-136 1 1/2 1 1/4
the pipe. They are effective in sealing
111-137 111-138 2 1 1/4
off tubes and in reducing corona
111-139 111-140 2 1/2 1
when necessary.
111-141 111-142 3 1 1/2
111-143 111-144 3 1/2 1 1/2
111-145 111-146 4 1 1/2
111-147 111-148 4 1/2 2
111-149 111-150 5 2
111-151 111-152 6 2
P
U
111-2 EXTERNAL CORONA BELLS
BRONZE
EXTERNALCORONABELLS
DIMENSIONS
NUMBER SIZE
A
111-153 1/2 1
111-154 3/4 1
Bronze External Corona Bells: 111-155 1 1
Designed for a drive fit as the only 111-156 1 1/4 1 1/8
means of connecting it to the pipe, 111-160 1 1/2 1 1/4
the type BCBE made of high strength 111-161 2 1 1/2
bronze is primarily used for sealing off 111-162 2 1/2 2
tubes and corona reduction. 111-163 3 2
111-164 3 1/2 2 1/8
111-165 4 2 1/4
111-166 4 1/2 2 1/2
111-167 5 2 5/8
111-168 6 2 5/8

ALUMINUM
EXTERNAL CORONA BELLS
DIMENSIONS
NUMBER SIZE
A
111-169 1/2 1
111-170 3/4 1
Aluminum Ecternal Corona Bells: 111-171 1 1
A lightweight, high strength aluminum 111-172 1 1/4 1 1/8
connector, the type ACBE is designed for 111-173 1 1/2 1 1/4
a drive fit as the only means of connecting 111-174 2 1 1/2
it to the pipe and is effective in sealing off 111-175 2 1/2 2
tubes or in corona reduction. 111-176 3 2
111-177 3 1/2 2 1/8
111-178 4 2 1/4
111-179 4 1/2 2 1/2
111-180 5 2 5/8
111-181 6 2 5/8
P
U
SECTION
FLEXIBLE TINNED COPPER BRAID
111-3
FLEXIBLE TINNED COPPER BRAID
CATALOG CURRENT PAD WIDTH PAD THICKNESS

NO. OF HOLES
NUMBER RATING (W) (T)
111-182 Please Specify 200 7/8 3/16

111-183 Please Specify 400 1 1/2 1/4
The type FCB consists of
111-184 Please Specify 600 1 1/2 1/2
seamless copper ferrules
pressed onto flexible tinned
copper braided wires.
FIGURE 1
1 1/2" W
For a single hole braid Normal lengths are 12” end to
user suffix:
end but lengths over that will
be readily supplied so long as
1HPS 9/16"
the desired length appears as
a suffix to the catalog number.
OVERALL T
If the length for catalog
number 111-182 must be 18"
FIGURE 2 and 2 hole Nema pads are
For a two hole braid 1 3/4" 3" required, the number should
use the suffix: W
be written on the order as
111-182-18-2HPS. For higher
2HPS current ratings please consult
9/16" the factory.
OVERALL T
FIGURE 3
To achieve a four 1 3/4" 3" W
hole pad configura-
tion simply place two
2 braids side by side.
1 3/4" 3 1/4"
9/16"
OVERALL
T
P
U
SECTION ALUMINUM COPPER CLAD
111-4 TRANSITION PLATES
ALUMINUM COPPER CLAD

TRANSITION PLATES
CATALOG THICKNESS
PAD EQUIVALENT
NUMBER IN INCHES
TP2 B 1/16
TP3 C 1/16
TP4 D 1/16

TP2 

(TWO HOLE PAD)
 Transition Plates:
These 80% aluminum 20%

copper clad plates provide ideal
transitions when making alumi-
 num to copper connections with
TP3
flat pads and bars.

The spacing of the holes adhere
to NEMA standards and have
(FOUR HOLE PAD)
 a thickness of 1/16”. Contact

sealant is recommended.

TP4


(FOUR BY FOUR PAD)


P
U

2020 Pdu STD Catalog

Uploaded by

Copyright:

Available Formats

2020 Pdu STD Catalog

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

2020 Pdu STD Catalog

Uploaded by

Copyright:

Available Formats

TRAVIS PATTERN & FOUNDRY

NOMINAL TORQUE VALUES FOR LUBRICATED ALUMINUM BOLTS:

NOMINAL TORQUE VALUES FOR SILICON BRONZE BOLTS:

Static eliminator spring ..................................................SE

Stainless Bolt, Lock Washer and Silicon Bronze Nut.....BCH

11-1 11-1A 11-2 11-2A

11-2EX 11-2AEX 11-3

11-4 11-4A 11-4-3COND 11-4A-3COND

11-5 11-6 11-7 11-8

Manufactured by: Pattern & Foundry, Inc.

12-1 12-1A 12-2 12-2A

12-3 12-3A 12-4 12-4A

12-4-2T 12-4A-2T 12-5 12-5A

Manufactured by: Pattern & Foundry, Inc.

12-6 12-6A 12-7 12-7A

13-1 13-1A 13-2 13-2A

13-3 13-3A 13-3-VA & 13-3A-VA 13-4 & 13-4A

Manufactured by: Pattern & Foundry, Inc.

14-1 14-1A 14-2 14-2A

14-2WRX 14-2WRX2 14-3 14-3A

15-1 15-1A 15-2 15-2A

15-3 15-3A 15-4 15-4A

Manufactured by: Pattern & Foundry, Inc.

SECTION 16 COMPRESSION FITTINGS

16-1 16-1A 16-1A-A1C 16-1A-2B

16-1A-2B-A1C 16-2 16-2A 16-3 & 16-3A

16-SWC-1 16-SWC-1-2B 16-SWC-2 16-SWC-3

Manufactured by: Pattern & Foundry, Inc.

SECTION 17 GROUND CLAMPS

17-1 17-2 17-3 17-4

17-5 17-5.5 17-6 17-6A

17-7 17-7A 17-8

SECTION 18 WELDMENT CONNECTORS

18-1 18-1EX 18-2 18-3

Manufactured by: Pattern & Foundry, Inc.

SECTION 18 WELDMENT CONNECTORS

18-4 18-5 18-6 18-7

18-8 18-9 18-10 18-11

18-12 18-13 18-14 18-15

18-16 18-17 18-18 18-19

Manufactured by: Pattern & Foundry, Inc.

18-SW-1 18-SW-1-EX 18-SW-2 18-SW-3

18-SW-4 18-SW-5 18-SW-6 18-SW-7

18-SW-8 18-SW-13 18-SW-14 18-SW-15

Manufactured by: Pattern & Foundry, Inc.

SECTION 19 BUS SUPPORTS

19-1 19-1A 19-2 19-2A

19-3 19-3A 19-4 19-5

19-6 19-6A 19-6-2CND 19-6-2CND

19-7 19-8A 19-9

Manufactured by: Pattern & Foundry, Inc.

SECTION 19 BUS SUPPORTS

19-9A 19-10 19-10A 19-11

110-1 110-1A 110-1U

110-1CS 110-1CS 110-CST 110-CST

SECTION 111 CORONA BELLS AND FLEXIBLE BRAIDS

111-1 111-1 111-2 111-2 111-3

Manufactured by: Pattern & Foundry, Inc.

bronze for clamping strength and