Scribd
Upload
413 views4 pages

Signals and Systems - Addition and Subtraction of Signals

The document discusses addition and subtraction of continuous-time signals and discrete-time signals. It provides examples of adding and subtracting two continuous-time signals at different time intervals. It also provides an example of adding and subtracting two discrete-time sequences by performing the operations on corresponding sample values.

Uploaded by

chetansawarkar5
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
413 views4 pages

Signals and Systems - Addition and Subtraction of Signals

The document discusses addition and subtraction of continuous-time signals and discrete-time signals. It provides examples of adding and subtracting two continuous-time signals at different time intervals. It also provides an example of adding and subtracting two discrete-time sequences by performing the operations on corresponding sample values.

Uploaded by

chetansawarkar5
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Advertisement

Signals and Systems: Addition and Subtraction of Signals


Electronics & Electrical Electron Digital Electronics

Addition and Subtraction of Continuous-Time Signals


The sum of two continuous time signals 𝑥1(𝑡) and 𝑥2(𝑡) can be obtained by adding their values at every
instant of time. Likewise, the difference of two continuous time signals 𝑥1(𝑡) and 𝑥2(𝑡) can be obtained by
subtracting the values of one signal (say 𝑥2(𝑡)) from another signal (say 𝑥1(𝑡)) at every instant of time.

Addition of Signals
Let two continuous time signals 𝑥1(𝑡) and 𝑥2(𝑡) as shown in Figure-1. The sum of these two signals 𝑥1(𝑡) +
𝑥2(𝑡) is also shown in Figure-1.
Explanation

The sum of these two signals can be obtained by considering different time intervals as follows −

For 𝟎 ≤ 𝒕 ≤ 𝟏− 𝑥1(𝑡) = 3 and 𝑥2(𝑡) is increasing linearly from 0 to 2. Therefore, the sum [i.e., 𝑥1(𝑡) +
𝑥2(𝑡)] will also increase linearly from (3 + 0 = 3) to (3 + 2 = 5).

For 𝟏 ≤ 𝒕 ≤ 𝟑− 𝑥1(𝑡) = 2 and 𝑥2(𝑡) = 2, thus


𝑥1(𝑡) +𝑥2(𝑡) = 2 + 2 = 4

For 3≤ 𝒕 ≤ 𝟒− 𝑥1(𝑡) = 3 and 𝑥2(𝑡) decreases linearly from 2 to 0. Hence, the sum of the signals will
also fall linearly from (3 + 2 = 5) to (3 + 0 = 3).
Advertisement

Subtraction of Signals
The subtraction [𝑥1(𝑡) − 𝑥2(𝑡)] of two continuous time signals 𝑥1(𝑡) and 𝑥2(𝑡) is shown in Figure-2.

Explanation
The difference of two continuous-time signals 𝑥1(𝑡) and 𝑥2(𝑡) can be obtained by considering different time
intervals as follows − Advertisement

For 𝟎 ≤ 𝒕 ≤ 𝟏−𝑥1(𝑡) = 3 and 𝑥2(𝑡) is increasing linearly from 0 to 2. Thus, the difference [𝑥1(𝑡) −𝑥2(𝑡)]
falls linearly from (3 – 0 = 3) to (3 – 2 = 1).

For 𝟏 ≤ 𝒕 ≤ 𝟑− 𝑥1(𝑡) = 2 and 𝑥2(𝑡) = 2, thus


𝑥1(𝑡) − 𝑥2(𝑡) = 2 − 2 = 0

For 3≤ 𝒕 ≤ 𝟒− 𝑥1(𝑡) = 3 and 𝑥2(𝑡) decreases linearly from 2 to 0. Hence, the difference of the signals
will rise linearly from (3 – 2 = 1) to (3 – 0 = 3).

Addition and Subtraction of Discrete-Time Signals


In the discrete time case, the sum of two sequences 𝑥1(𝑛) and 𝑥2(𝑛) can be obtained by adding the
corresponding sample values. Similarly, the difference of the two sequences 𝑥1(𝑛) and 𝑥2(𝑛) can be
obtained by subtracting each sample of one signal from the corresponding sample of the other signal.

Let two discrete-time sequences are given as follows −

𝑥1(𝑛) = {2, 1, 3, 5, 2}

𝑥2(𝑛) = {1, 4, 2, 1, −3}

Then, the addition of discrete-time signals is,

𝑥1(𝑛) + 𝑥2(𝑛) = {2 + 1, 1 + 4, 3 + 2, 5 + 1, 2 − 3} = {3, 5, 5, 6, −1}

Similarly, the subtraction of discrete-time signals is,

𝑥1(𝑛) - 𝑥2(𝑛) = {2 − 1, 1 − 4, 3 − 2, 5 − 1, 2 + 3} = {1, −3, 1, 4, 5}

You might also like