TDS Jotasealer 03
TDS Jotasealer 03
TDS Jotasealer 03
Jotasealer 03
Product description
Type
A modified acrylic water based sealer with good adhesion and alkali resistance for interior walls.
Alkali Resistance – Seals off substrate to resist alkaline and moisture attack to prevent overall deterioration of
paint film.
Formulated without Harmful Chemicals - 100% Free from harmful chemicals such as APEO, formaldehyde,
heavy metals and has low volatile organic compound (VOC).
Recommended use
For interior application, suitable for new buildings and repainting.
Substrate
On concrete, masonry, plaster, brick work and soft board surfaces.
Product data
Packaging size Packing may vary from country to country according to local requirements.
Colours White.
Solids by volume 35 ± 2 volume%
Application data
Remarks
Handle with care. Stir well before use.
Thinner
Water
Dilution
The paint is ready to use after proper stirring. If thinning is required, water may be added up to a maximum of
5%.
Drying times
Drying times are generally related to air circulation, temperature, film thickness and number of coats, and will
be affected correspondingly. The figures given in the table are typical with:
Good ventilation (Outdoor exposure or free circulation of air)
Typical film thickness
One coat on top of inert substrate
The given data must be considered as guidelines only. The actual drying time and time before recoating may be
shorter or longer, depending on the ambient temperature, film thickness, ventilation, humidity, underlying paint
system, requirement for early handling and mechanical strength etc.
1. Recommended data given is, for recoating with the same generic type of paint.
2. In case of multi-coat application, drying times will be influenced by the number and sequence and by the
total thickness of previous coats applied.
3. The surface should be dry and free from any contamination prior to application of the subsequent coat.
Primer
Jotasealer 03 : 1 coat
Topcoat
Strax or Jotaplast : 2 coats
Storage
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well
ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle
with care.
Certificates
Complies to Singapore Green Label and Malaysia Eco-Sirim Label.
A Material Safety Data Sheet for the product has been issued.
Detailed information regarding health and safety risks and precautions for the use of this product is specified in
the product's Safety Data Sheet.
First-aid measures, refer to section 4.
Handling and storage, refer to section 7.
Transport information, refer to section 14.
Regulatory information, refer to section 15.
Disclaimer
The information in this document is given to the best of Jotun's knowledge, based on laboratory testing and
practical experience. Jotun's products are considered as semi-finished goods and as such, products are often
used under conditions beyond Jotun's control. Jotun cannot guarantee anything but the quality of the product
itself. Minor product variations may be implemented in order to comply with local requirements. Jotun reserves
the right to change the given data without further notice.
Users should always consult Jotun for specific guidance on the general suitability of this product for their needs
and specific application practices.
If there is any inconsistency between different language issues of this document, the English (United Kingdom)
version will prevail.