Si2151

Worldwide Digital and Analog TV Tuner

Description Features
The Si2151 is the industry's most advanced hybrid TV - Worldwide hybrid TV tuner
tuner supporting all worldwide terrestrial and cable TV - NTSC, PAL/SECAM, ATSC/QAM, DVB-T2/T/C2/C,
standards for digital and analog TV reception. Leveraging ISDB-T/C, DTMB
five generations of field-proven hybrid TV tuner technology, - 1.7 MHz, 6 MHz, 7 MHz, 8 MHz, and 10 MHz
the Si2151 delivers the same or better RF performance as channel bandwidths
Skyworks' Si2157 hybrid TV tuner while further reducing - Industry-leading margin to A/74, NorDig, D-Book, C-
Book, ARIB, EN55020, OpenCable™, DTMB
footprint size and bill of materials cost.
- Lowest BOM for a silicon hybrid TV tuner
Available in an industry-leading 3x3 mm QFN package, the - No balun
Si2151 eliminates the need for an external balun, LNAs, - No SAW filters or wire-wound inductors
SAW filters, and inductive power supply filtering to deliver - Integrated LNAs and complete tracking filters
the lowest-cost, most design-friendly and area-efficient - Best-in-class real-world reception
solution available today. While competing solutions may - Industry-leading phase noise performance
also eliminate the balun, they suffer degradation in NF and - High immunity to Wi-Fi and LTE interference
second-order distortion, compromising reception. A fully- - Low power consumption
integrated 1.8 V LDO enables single supply operation, - 3.3 V and 1.8 V power supplies
while a dual supply option offers additional system - Integrated 1.8 V LDO for 3.3 V single-supply
flexibility. Increased immunity to LTE interference and a operation
harmonic rejection mixer with outstanding immunity to Wi- - Integrated power-on reset circuit
Fi interference eliminate the need for external filtering. - Single LIF output to SoC and/or demodulator
For advanced digital broadcast standards with high-order - Standard CMOS process technology
constellations, such as DVB-T2 and DVB-C2, the superior - Smallest footprint for a silicon hybrid TV tuner
integrated phase noise of the Si2151 provides several dB - 3x3 mm, RoHS-compliant 24-pin QFN
of improved reception performance compared to Applications
competing solutions. Additionally, a software-selectable - Hybrid ½-NIM tuner module
cable mode offers optimized return loss. - iDTV (Integrated Digital TV)
The Si2151 delivers exceptional picture quality and a - Hybrid terrestrial and cable STB
higher number of received stations when compared to - Hybrid PVR, DVD and Blu-Ray disc recorder
other silicon tuners. Incorporating worldwide field - PC-TV accessories
experience from five prior hybrid tuner generations in mass
production, the Si2151 delivers the highest tolerance to
real-world reception conditions.

Si2151 I
AGC
DTV
PGA
INTERFACE

ADC DSP DEMOD

OUTPUT

ANTENNA LIF
INPUT
Q FILTER ATV
PGA AGC
ADC DEMOD

RF IF SDA
0 / 90 LOW-IF
INTERFACE

AGC AGC
CONTROL

SCL AV
3.3 V SoC
FREQ ADDR
LDO XOSC
1.8 V SYNTH
1.8 V
XTAL_O

XTAL_I

GPIO
XOUT

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
• Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 22, 2021
 Si2151
Worldwide Digital and Analog TV Tuner

Table 1. Selected Electrical Specifications

(VDDH = 3.3 V, VDDL = 1.8 V, TA = 25 °C)

Parameter Test Condition Typ Unit

Supply Voltage 1.8 and 3.3, or only V
3.3
Total Power Consumption External 1.8 V supply, ATV Mode 506 mW
RF Input Frequency Range 42 to 1002 MHz
NF, terrestrial* VHF-L1 (42–103 MHz) 3.6 dB
VHF-L2 (104–198 MHz) 2.3 dB
VHF-H (199–470 MHz) 3.0 dB
UHF (471–870 MHz) 3.2 dB
Return Loss* Terrestrial mode 3 dB
Cable mode 8 dB
Out-of-band IIP3* VHF-H, N±18, ±36 +5 dBm
In-Band IIP3* VHF-H, N±1, ±2 –6 dBm
LO Phase Noise at 860 MHz 1 kHz  10 kHz  100 kHz  1 MHz –100  –100  –105  – dBc/Hz
132
LO Integrated Phase Noise at DSB: 125 Hz to 4 MHz offset 0.25 rms
860 MHz (–47) (dBc)
Analog IF Spurious Distortion S=P –72 dB
LIF Output Center Frequency Channel BW = 6 MHz  7 MHz  4 to 7  4.5 to 6.5  5 to MHz
8 MHz 6

Pin Assignments 3x3 mm QFN-24 Package Information

XTAL_O

XTAL_I
VDDH

VDDH
GND
NC

RF_REF 19 18 17 16 15 14 13

RF_IP 20 12 XOUT

GND 21 11 LIF_P
GND
RF_IN 22 10 LIF_N
PAD Dimension Min Nom Max Unit
ADDR 23 9 VDDH
A 0.80 0.85 0.90 mm
GPIO1 24 8 GND
D, E 3.00BSC mm
2 3 4 5 6
1 7 VDDL e 0.40 BSC mm
GND
SDA
GPIO2

AGC2

AGC1
SCL

e1 0.45 BSC mm
J, K 1.60 1.70 1.80 mm

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
• Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 22, 2021