Bike GPS

Tracker
User Manual

Download QUBO GO APP NOW

CONTENTS

1. Product Introduction

2. In the box

3. Installation Support

4. Installation Process

5. Qubo GO App

6. Troubleshooting

7. Safety & Compliance Information

8. Limited Warranty Statement

QUBO BIKE
GPS TRACKER
SAFE TRAVELS. ALWAYS

2. Product Introduction

Qubo GPS tracker in a

vehicle is a device that
utilizes Global Positioning
System (GPS) technology
to determine and record
the precise location of the
vehicle in real-time.
This information is then transmitted to a cloud & App,
allowing the user to monitor the vehicle’s location and
movement.
Product Description
 LED Behavior

Power – Red Indication Function

Quick flashing Flash 0.3s at Low Battery
interval of 0.3s
Solid Red - Charging
Flashing Flash 1s at Full charge
interval of 3s
Slow flashing Flash 0.1s at Working Normal
interval of 3s
OFF Quick flashing Power off

GPS – Blue Indication Function

Quick flashing Flash 0.3s at Searching GPS
interval of 0.3s Signal
Slow flashing Flash 0.1s at Receive GPS
interval of 3s signal normal
OFF - No GPS signal

GSM LED – Green Indication Function

Quick flashing Flash 0.3s at GSM initializing
interval of 0.3s
Flashing Flash 1s at interval Receive GSM
of 3s signal normal
Solid Green - In communication
with Phones
Slow flashing Flash 0.1s at GSM online
interval of 3s
OFF - No GSM signal
2. Whats in the box?

3. Installation Support

Installing a Qubo GPS tracker in a

Bike requires technical
knowledge and familiarity with
the vehicle’s electrical system.
We strongly recommend to seek
an Authorized installer for set up.

To check Authorized installer

availability in your area , please visit Reach us at:
our customer support page. +91 8178977914
www.quboworld.com/support
4. Installation Process

These are the typical steps that the installer will follow
during device installation in your vehicle.

Pre Installation Check

Please make sure that you check the below things
before installing the device.

• Do the device installation on your vehicle in an

open space for better SIM & GPS connectivity.
Avoid doing in the basements.
• Take a Photo of Serial number QR code on the
device to use it during the App onboarding

Installation Steps
Step 1

Select a hidden and secure location

within the bike’s to mount the GPS
tracker. Make sure the top cover of
the tracker is facing towards sky
and it should be out of sight and not
easily accessible to potential thieves.
Also device should be placed in such
manner that it should be towards
moving direction of Vehicle.

Note : Make sure device is upwards horizontally towards

sky and it should not be Tilted or vertical.
Step 2

Identify the Positive (+),

Ground (-) & ACC wires in
the Bike.

Positive will be the vehicle

battery positive (+) 12 to 24 V DC

terminal, Ground (-) will be

the Vehicle metal chassis
battery negative (-)
terminal, ACC is the
vehicle’s Ignition ON
terminal.

Step 3

Connect the Tracker cable to Positive (+) , Ground (-)

& ACC of Bike.

Red wire to the Battery positive (+) terminal , Black

wire to the Ground (-) and Orange wire to the
Ignition ON/OFF terminal.

Step 4

Connect the other end of Power cable with the

Tracker to Power it ON. blinking.
You will notice LEDs will start blinking to indicate that
device is turned ON. If the LEDs are not blinking, plz
check the wiring connection again.

During power ON , Device will blink for some time &

then goes to sleep mode for power saving. In sleep
mode, the LEDs wont blink. The device will resume
again to normal mode once any activity is detected in
the device.

Step 5

Remove the Top cover,

switch ON the toggle
switch & close the cover
back

App onboarding

Step 6

Download Qubo Go
App from App store or
Playstore in your mobile
Click here for App download

Create an account & add the GPS tracker device.

Scan the QR code of device in the App & follow the
instructions to commission.
QR code will be available
on the device & also on QR
Code
the packaging box. Keep a
photo of this QR code for
your future references.

The device has the Serial number QR code at the back.

Please capture an image of the QR Code and save it to
use in the device set up process within the app.

Secure Device

Step 8

Before closing up any panels or covers, test the GPS

tracker to ensure its receiving power and transmitting
data correctly. Use the GPS tracker’s app to check for
its functionality.

Step 9

Secure the GPS tracker in its chosen location inside

the bike using the zip ties or brackets. Make sure the
Device front side facing the sky. Bikeefully bundle
and conceal any exposed wires to maintain a tidy and
discrete installation.

Step 10

Double-check all connections and make sure every-

thing is secure If you’re satisfied with the installation
and everything is functioning correctly, put back
panels or covers you removed during the process.
 Features
5. QUBO GO APP

Device
Settings

ARM Mode Share Vehicle

ON/OFF Location

Your Location Traffic Details

in App

Re-centre Map Map Type

Status of
your vehicle

DASHBOARD
 History

Events

Hamburger Menu

Dashboard

Insights
6. TROUBLESHOOTING

Common GPS tracking device problems

• No Power
One of the most common reasons why GPS trackers
may not work is due to power issues. Without power,
the tracker cannot transmit its location to the server.
It is essential to ensure that the GPS tracker has
sufficient power, through a continuous power source.

• No GPS Signal
Another common reason why GPS trackers may not
work is due to a lack of GPS signal. GPS trackers rely
on satellites to provide location data. If there is no
GPS signal in the area, the tracker will not be able to
provide accurate location data. GPS signals may be
obstructed by tall buildings, heavy foliage, or other
natural or artificial obstructions. If your GPS tracker is
not transmitting location data, try moving to an open
area with a clear view of the sky.

• SIM Card Issues

Most GPS trackers use SIM Card to transmit data to
the server. If there are any issues with the SIM Biked,
the tracker will not be able to transmit data, and the
location information will not be updated. SIM Card
issues can include a lack of credit, incorrect APN
settings, or incorrect SIM Card installation.
• Network Issues
Sometimes, the network may be down or overloaded,
leading to issues with the GPS tracker’s ability to
transmit data. This can happen in areas with poor
network coverage or during times of high network
traffic. If your GPS tracker is not transmitting location
data, check to see if there are any network issues in
the area.

• Technical Malfunctions
Finally, there may be technical malfunctions with the
GPS tracker itself. This could include issues with the
device’s firmware, hardware, or software. If your GPS
tracker is not working, it may be worth contacting the
manufacturer or supplier for support.
7. SAFETY & COMPLIANCE
INFORMATION

Use Responsibly: Read all instructions and safety information

before use.
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS
COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER
INJURY OR DAMAGE.
The installation method of the Qubo GPS Tracker is concealed
installation, and the installation should by a professional
installer designated by the Qubo.
Installation precautions: Hide the installation, pay attention to
waterproof; use a cable tie to fix it, or use a sponge double-
sided tape; ensure that the front (indicator) is facing up to the
sky.
After installation, please verify if all the features are working.
Qubo devices & Services are not meant to be explored by
anyone under the age of 18.
Qubo devices are intended for non-time critical control and
management of data and information.
Qubo devices and Services will require certain input parameters
to perform hassle-free including an active internet connection
and live power supply.
Do not touch your Qubo or any wires connected to your Qubo
device during a lightning storm.
Do not dismantle your Qubo Device on your own.
Do not throw electronics in bins having “Do Not Dispose” sign.
Do not give e-waste to informal (Kabbadi) and unorganized
sectors l Local Scrap Dealer Rag Pickers.
8. LIMITED WARRANTY
STATEMENT

Thank you for selecting Qubo Bike GPS Tracker by Hero Electronix.

Important
Please retain your receipt as proof of purchase.

HERO Electronix Private Limited warrants to the owner of the Qubo Bike
GPS Tracker, (henceforth referred as Device) that the Device will be free
from the defects in material and workmanship for a period of 1 year or
first cycle of bundled subscription which ever ends later. This warranty
covers only the defects in products arising out of manufacturing or faulty
workmanship.

During this warranty period, if any defect arises in the Device, HERO
Electronix will, at its sole discretion, either (i) repair the device with
either new or refurbished parts, or (ii) replace the Device with a new or
refurbished Device that is equivalent to the Device to be replaced. This
limited warranty applies to any repair, replacement part or replacement
device for the remainder of the original warranty period or for 90 (Ninety)
days, whichever period is longer.

• This limited warranty is non-transferable.

• This limited warranty is only valid in India.
• The limited warranty is subjected to availability of an active
Subscription on customers account.

Instructions
For specific instructions about how to obtain warranty services for your
Device, please contact our Toll-free helpline. In general, you will need to
deliver the Device in either its original packing or in equally protective
packing to the address specified by Customer Service. HERO Electronix
will bear all the cost of the return shipping to the owner except with
respect to any Ineligible Product (defined below), for which owner will
have to bear all the cost.
This limited warranty does not cover the following (Collectively Ineligible
Products)
________________________________________

• If the warranty seal on the Device is broken.

• Devices that have been subjected to: (a) modifications, alterations,
tampering or improper maintenance and repair (b) handling, storage,
installation, testing or use not in accordance with any User guide,
Placement guidelines, other instructions provided by HERO Electronix
(c) abuse or misuse of the product. (d) breakdown, fluctuations, or
interruptions in electrical power or the telecommunication network;
or (e) Acts of God, including but not limited to lighting, flood,
tornado, earthquake or hurricane.
• Errors and damages caused by: (a) spills of food and corrosive
liquids, or physical abuse, or normal wear and tear, (b) use of or being
• connected to any accessory which was not supplied or authorised
by HERO Electronix.
• Plastic components like front or back covers plus rubber components.
• Subscription extension through subscription renewal does not
increase the warranty period.

Correct disposal of the product

If at any time in future you should need to dispose of this
product please note that, Waste electrical products should
not be disposed off with household waste. For the purpose of
recycling, to facilitate effective utilisation of resources, please
return this product to a nearby authorised collection centre/
recycler/ Service centre / Registered Dismantler, when disposing
of this product. In case of further information, please contact our
Toll Free helpline number.

For all product related complaints/assistance, please contact

Hero Electronix Pvt. Ltd. 503, 5th Floor Rectangle 1,
D4, Saket District Center, New Delhi - 110017
Email us at: [email protected] |
www.quboworld.com