06/04/2021 ccna-200-301: 4.

0 IP Services Questions

Você acessou como Misael Henrique Sabóia Reimão (Sair)

Home Meus Cursos

Página Inicial ► ccna-200-301 ► Questionários ► 4.0 IP Services Questions ► Tentativa 1

4.0 IP Services Questions - Tentativa 1

1 A network engineer must back up 20 network router configurations globally within a customer
Notas: --/1
environment. Which protocol allows the engineer to perform this function using the Cisco IOS MIB?

Escolher uma a. SMTP

resposta. b. ARP
c. COP
d. SNMP

Enviar

2 An engineer configured NAT translations and has verified that the configuration is correct. Which IP
Notas: --/1
address is the source IP?

R2#show ip nat translations

Pro Inside global Inside local Outside local Outside global
tcp 172.23.104.3:43268 10.4.4.4:43268 172.23.103.10:23 172.23.103.10:23
tcp 172.23.104.4:45507 10.4.4.5:45507 172.23.103.10:80 172.23.103.10:80

Escolher uma a. 10.4.4.4

resposta. b. 172.23.103.10
c. 172.23.104.4
d. 10.4.4.5

Enviar

3 Choose three characteristics of a DHCP Server. (Choose 3)

Notas: --/1
Escolha pelo a. resolves web URLs to IP addresses
menos uma b. holds the TCP/IP settings to be distributed to the clients
resposta.
c. stores a list of IP addresses mapped to names
d. assigns a default gateway to a client
e. assigns IP addresses to enabled clients

Enviar

4 Choose two characteristics of a DNS Server. (Choose 2)

Notas: --/1
Escolha pelo a. holds the TCP/IP settings to be distributed to the clients
menos uma b. assigns IP addresses to enabled clients
resposta.
c. stores a list of IP addresses mapped to names

www.dltec.com.br/class/mod/quiz/attempt.php?id=4229 1/9
06/04/2021 ccna-200-301: 4.0 IP Services Questions

d. assigns a default gateway to a client

e. resolves web URLs to IP addresses

Enviar

5 If a notice-level messaging is sent to a syslog server, which event has occurred?

Notas: --/1
Escolher uma a. An ARP Inspection has failed
resposta. b. A routing instance has flapped
c. A network device has restarted
d. A debug operation is running

Enviar

6 What are two roles of Domain Name Services (DNS)? (Choose Two)
Notas: --/1
Escolha pelo a. encrypts network Traffic as it travels across a WAN by default
menos uma b. builds a flat structure of DNS names for more efficient IP operations
resposta.
c. improves security by protecting IP addresses under Fully Qualified Domain
Names (FQDNs)
d. allows a single host name to be shared across more than one IP address
e. enables applications to identify resources by name instead of IP address

Enviar

7 What event has occurred if a router sends a notice level message to a syslog server?
Notas: --/1
Escolher uma a. An ICMP connection has been built
resposta. b. A certificate has expired.
c. An interface line has changed status
d. A TCP connection has been torn down

Enviar

8 What is a DHCP client?

Notas: --/1
Escolher uma a. a host that is configured to request an IP address automatically
resposta. b. a router that statically assigns IP addresses to hosts.
c. a server that dynamically assigns IP addresses to hosts.
d. a workstation that requests a domain name associated with its IP address

Enviar

9 What is a function of TFTP in network operations?

Notas: --/1
Escolher uma a. transfers files between file systems on a router
resposta. b. transfers a backup configuration file from a server to a switch using a
username and password
www.dltec.com.br/class/mod/quiz/attempt.php?id=4229 2/9
06/04/2021 ccna-200-301: 4.0 IP Services Questions

c. transfers IOS images from a server to a router for firmware upgrades

d. transfers a configuration files from a server to a router on a congested link

Enviar

10 What will happen if you configure the logging trap debug command on a router?
Notas: --/1
Escolher uma a. It causes the router to send all messages to the syslog server
resposta. b. It causes the router to send messages with lower severity levels to the
syslog server
c. It causes the router to send all messages with the severity levels Warning,
Error, Critical, and Emergency to the syslog server
d. It causes the router to stop sending all messages to the syslog server

Enviar

11 Where does the configuration reside when a helper address Is configured to support DHCP?
Notas: --/1
Escolher uma a. on the router closest to the client
resposta. b. on every router along the path
c. on the switch trunk interface
d. on the router closest to the server

Enviar

12 Which command can you enter to allow Telnet to be supported in addition to SSH?
Notas: --/1
Escolher uma a. no transport input telnet
resposta. b. transport input telnet
c. transport input telnet ssh
d. privilege level 15

Enviar

13 Which command must be entered to configure a DHCP relay?

Notas: --/1
Escolher uma a. ip helper-address
resposta. b. ip dhcp pool
c. ip address dhcp
d. ip dhcp relay

Enviar

14 Which command should you enter to configure a device as an NTP server?

Notas: --/1
Escolher uma a. ntp master
resposta. b. ntp server
c. ntp peer
www.dltec.com.br/class/mod/quiz/attempt.php?id=4229 3/9
06/04/2021 ccna-200-301: 4.0 IP Services Questions

d. ntp authenticate

Enviar

15 Which effect does the aaa new-model configuration command have?

Notas: --/1
Escolher uma a. It associates a RADIUS server to an group.
resposta. b. It enables AAA services on the device
c. It configures the device to connect to a RADIUS server for AAA
d. It configures a local user on the device.

Enviar

16 Which feature is enabled by this configuration?

Notas: --/1
R1(config)#ip nat pool dltec 10.1.1.0 10.1.1.50 255.255.255.0

Escolher uma a. a DHCP pool

resposta. b. a dynamic NAT address pool
c. static NAT translation
d. PAT

Enviar

17 Which function does an SNMP agent perform?

Notas: --/1
Escolher uma a. it requests information from remote network nodes about catastrophic
resposta. system events.
b. it sends information about MIB variables in response to requests from the
NMS
c. it coordinates user authentication between a network device and a
TACACS+ or RADIUS server
d. it manages routing between Layer 3 devices in a network

Enviar

18 Which keyword in a NAT configuration enables the use of one outside IP address for multiple inside
Notas: --/1
hosts?

Escolher uma a. source

resposta. b. overload
c. pool
d. static

Enviar

19 Which NAT term is defined as a group of addresses available for NAT use?
Notas: --/1

www.dltec.com.br/class/mod/quiz/attempt.php?id=4229 4/9
06/04/2021 ccna-200-301: 4.0 IP Services Questions

Escolher uma a. dynamic NAT

resposta. b. static NAT
c. NAT pool
d. one-way NAT

Enviar

20 Which statement about the nature of NAT overload is true?

Notas: --/1
Escolher uma a. applies a many-to-many relationship to internal IP addresses
resposta. b. applies a one-to-one relationship to internal IP addresses
c. can be configured only on Gigabit interface
d. applies a one-to-many relationship to internal IP addresses

Enviar

21 Which technology must be implemented to configure network device monitoring with the highest
Notas: --/1
security?

Escolher uma a. NetFlow

resposta. b. IP SLA
c. syslog
d. SNMPv3

Enviar

22 Which two actions are performed by the Weighted Random Early Detection mechanism? (Choose
two)
Notas: --/1

Escolha pelo a. It supports protocol discovery

menos uma b. It can mitigate congestion by preventing the queue from filling up
resposta.
c. It guarantees the delivery of high-priority packets
d. It can identify different flows with a high level of granularity
e. It drops lower-priority packets before it drops higher-priority packets

Enviar

23 Which two pieces of information can you determine from the output of the show ntp status
Notas: --/1
command? (Choose two)

Escolha pelo a. the configured NTP servers

menos uma b. whether the clock is synchronized
resposta.
c. the NTP version number of the peer
d. whether the NTP peer is statically configured
e. the IP address of the peer to which the clock is synchronized

Enviar

www.dltec.com.br/class/mod/quiz/attempt.php?id=4229 5/9
06/04/2021 ccna-200-301: 4.0 IP Services Questions

24 Which two statements about NTP operations are true? (Choose two.)
Notas: --/1
Escolha pelo a. Cisco routers can act only as NTP clients.
menos uma b. Cisco routers can act only as NTP servers.
resposta.
c. NTP uses UDP over IP.
d. NTP uses TCP over IP.
e. Cisco routers can act as both NTP authoritative servers and NTP clients.

Enviar

25 Which two tasks must be performed to configure NTP to a trusted server in client mode on a single
Notas: --/1
network device? (Choose two)

Escolha pelo a. Verify the time zone

menos uma b. Disable NTP broadcasts
resposta.
c. Set the NTP server private key
d. Enable NTP authentication
e. Specify the IP address of the NTP server

Enviar

26 Which type of address is the public IP address of a NAT device?

Notas: --/1
Escolher uma a. inside public
resposta.
b. inside global
c. outside global
d. inside local
e. outside public
f. outside local

Enviar

27 Which type of information resides on a DHCP server?

Notas: --/1
Escolher uma a. a list of the available IP addresses in a pool
resposta. b. a list of statically assigned MAC addresses
c. usernames and passwords for the end users in a domain
d. a list of public IP addresses and their corresponding names

Enviar

28 Order the DHCP message types as they would occur between a DHCP client and a DHCP server.
Notas: --/1
1 Escolher...

2 Escolher...

3 Escolher...

4 Escolher...

www.dltec.com.br/class/mod/quiz/attempt.php?id=4229 6/9
06/04/2021 ccna-200-301: 4.0 IP Services Questions

Enviar

29 Choose the descriptions of file transfer protocols from the left onto the correct protocols on the right.
Notas: --/1
uses TCP Escolher...

provides reliability when loading an IOS image upon boot up Escolher...

uses UDP Escolher...

does not require user authentication Escolher...

uses ports 20 and 21 Escolher...

uses port 69 Escolher...

Enviar

30 Choose the IPv6 DNS record types from the left onto the description on the right.
Notas: --/1
SOA Escolher...

NS Escolher...

PTR Escolher...

AAAA Escolher...

CNAME Escolher...

Enviar

31 Choose the functions from the left onto the correct network components on the right.
Notas: --/1
stores a list of IP addresses mapped to names Escolher...

holds the TCP/IP settings to be distributed to the clients Escolher...

resolves web URLs to IP addresses Escolher...

assigns a default gateway to a client Escolher...

forwards DHCP packets between clients and servers located in Escolher...

different networks
assigns IP addresses to enabled clients Escolher...

Enviar

32 Choose the QoS congestion management terms from the left onto the description on the right.
Notas: --/1
CQ Escolher...

FIFO Escolher...

CBWFQ Escolher...
PQ Escolher...

WFQ Escolher...

Enviar

33 Choose the SNMP components from the left onto the descriptions on the right.

www.dltec.com.br/class/mod/quiz/attempt.php?id=4229 7/9
06/04/2021 ccna-200-301: 4.0 IP Services Questions
Notas: --/1
SNMP manager Escolher...

SNMP agent Escolher...

SNMP trap Escolher...

MIB Escolher...

Enviar

34 Router R1 is configured with static NAT. Addressing on the router and the web server are correctly
Notas: --/1
configured, but there is no connectivity between the web server and users on the Internet. What is a
possible reason for this lack of connectivity?

Escolher uma a. Interface Fa0/0 should be configured with the command ip nat outside
resposta. b. The NAT configuration on interface S0/0/1 is incorrect.
c. The inside global address is incorrect.
d. The router NAT configuration has an incorrect inside local address.

Enviar

35 You need to make it possible for hosts from 192.168.11.2 to 253 to access the Internet using L3 and
Notas: --/1
L4 addresses translation. Choose four commands that accomplish this task. (Choose 4)

Escolha pelo a. R1 - interface fa0/0 - ip nat inside source list 1 interface s0/0/1 overload
menos uma b. R1 - global config - ip nat inside source list 1 interface s0/0/1 overload
resposta.
c. R1 - global config - access-list 1 permit 192.168.11.2 192.168.11.253
d. R1 - interface fa0/0 - ip nat inside
e. R1 - interface fa0/0 - ip nat outside
f. R1 - interface s0/0/1 - ip nat inside

www.dltec.com.br/class/mod/quiz/attempt.php?id=4229 8/9
06/04/2021 ccna-200-301: 4.0 IP Services Questions

g. R1 - interface s0/0/1 - ip nat outside

h. R1 - global config - access-list 1 permit 192.168.11.0 0.0.0.255

Enviar

36 Refer to the exhibit. An engineer deploys a topology in which R1 obtains its IP configuration from
Notas: --/1
DHCP. If the switch and DHCP server configurations are complete and correct. Which two sets of
commands must be configured on R1 and R2 to complete the task? (Choose two)

Escolha pelo a. R1 - interface fa0/0 - ip address dhcp + no shutdown

menos uma b. R1 - interface fa0/0 - ip helper-address 198.51.100.100
resposta.
c. R2 - interface gi0/0 - ip helper-address 198.51.100.100
d. R2 - interface gi0/0 - ip address dhcp
e. R1 - interface fa0/0 - ip helper-address 192.0.2.2

Enviar

37 Which two must be met before SSH can operate normally on a Cisco IOS switch? (Choose two)
Notas: --/1
Escolha pelo a. A console password must be configured on the switch
menos uma b. IP routing must be enabled on the switch
resposta.
c. The ip domain-name command must be configured on the switch
d. The switch must be running a k9 (crypto) IOS image
e. Telnet must be disabled on the switch

Enviar

Salvar sem enviar Enviar página Enviar tudo e terminar

DlteC do Brasil Você acessou como Misael Henrique Sabóia Reimão (Sair)
www.dltec.com.br

www.dltec.com.br/class/mod/quiz/attempt.php?id=4229 9/9