Compressed Air

Particulate Filters
Up to 99.999%
Market leading
particle retention
differential pressure
of <125 mbarin
when tested across
Models | A30006 to A31500 accordance with
X1 and XA grades
Flow Rates 6 SCFM (10 Nm³/hr) to 1500 SCFM (2550 Nm³/hr)
ISO 12500-3

Advancements in filtration technology, improved low

differential pressure and a step change in performance
ensures the Alpha Particulate (Dust) Filters are the ideal
solution for installation downstream of regenerative
compressed air and gas dryers.

With exceptional results in particle retention of up to 99.999%, and

significantly reduced pressure loss, Alpha Particulate Filters ensure total
protection of manufacturing equipment from dust carryover.
Available in a range of connection sizes from 1/8” to 3”, Alpha Particulate
Filters have a maximum temperature of 120ºC (248ºF) and increased
operating pressure of 20.7 barg (300 psig).

Modular Filter Filtration Technology Product Safety in Mind

Low cost connecting kits and new Alpha deep pleated media Lock indication arrows ensure
filter head design enables easy technology delivers a step change effective sealing
close coupling assembly in performance

ƒ Flow-Optimised Design Advanced filter head design for optimised flow performance

ƒ Flexible Installation Modular design and accessible fixings enable simple close coupling assembly

ƒ Market Leading Performance Custom engineered filtration media delivers optimum performance in line
with air quality standard ISO 8573-1: 2010

ƒ Simplified Serviceability Profiled bowl design and push fit elements ensure quick and reliable maintenance

ƒ Corrosion Protection Internal and external electrophoretic paint finish followed by a tough exterior polyester
powder coating

ƒ Colour Coded Element End Caps Easy and accurate grade identification

For further information please visit www.walkerfiltration.com

 For further information please call: +44 (0) 191 417 7816

Technical Specification
Inlet flow rate* Dimensions mm
Filter model Pipe size inches Weight Kg Element model
Nm³/hr SCFM A B C D
A30006 (grade) 1
/8 10 6 50 17 157 60 0.3 E30306 (grade)
A30015 (grade) ¼ 25 15 50 17 157 60 0.3 E30306 (grade)
A30025 (grade) ¼ 42 25 70 23 231 70 0.6 E30408 (grade)
A30032 (grade) 3
/8 54 32 70 23 231 70 0.6 E30408 (grade)
A30050 (grade) ½ 85 50 70 23 231 70 0.6 E30412 (grade)
A30070 (grade) ½ 119 70 127 32 285 80 1.7 E30612 (grade)
A30085 (grade) ¾ 144 85 127 32 285 80 1.7 E30612 (grade)
A30105 (grade) 1 178 105 127 32 285 80 1.7 E30612 (grade)
A30125 (grade) ¾ 212 125 127 32 370 80 2.0 E30621 (grade)
A30175 (grade) 1 297 175 127 32 370 80 2.0 E30621 (grade)
A30280 (grade) 1¼ 476 280 140 41 476 85 3.0 E30731 (grade)
A30320 (grade) 1½ 544 320 140 41 476 85 3.0 E30731 (grade)
A30400 (grade) 1½ 680 400 170 53 508 100 4.9 E30831 (grade)
A30450 (grade) 2 765 450 170 53 508 100 4.9 E30831 (grade)
A30700 (grade) 2 1189 700 170 53 708 100 5.5 E30850 (grade)
A30850 (grade) 2½ 1444 850 220 70 736 100 10.5 E31140 (grade)
A30900 (grade) 3 1529 900 220 70 736 100 10.5 E31140 (grade)
A31250 (grade) 3 2125 1250 220 70 857 100 11.5 E31160 (grade)
A31500 (grade) 3 2550 1500 220 70 1005 100 12.5 E31175 (grade)
* Rated flow at 7 barg, reference conditions at 1 bar (a) 20ºC
Grade RX25 RX5 RX1 RXA RAC
Particle removal 25 micron 5 micron 1 micron 0.01 micron 0.01 micron
Maximum particle size class** - 4 3 1 1
Maximum oil carryover at 20°C (68°F) - - - - 0.003 mg/m³
Pressure loss - clean & dry 30 mbar 0.4 psi 40 mbar 0.6 psi 75 mbar 1.1 psi 100 mbar 1.5 psi 75 mbar 1.1 psi
Pressure loss - element change 12 mths 8000 hrs 12 mths 8000 hrs 12 mths 8000 hrs 12 mths 8000 hrs at least every 6 mths
Maximum temperature 120°C 248°F 120°C 248°F 120°C 248°F 120°C 248°F 50°C*** 122°F***
Maximum working pressure 20.7 barg 300 psig 20.7 barg 300 psig 20.7 barg 300 psig 20.7 barg 300 psig 20.7 barg 300 psig
Element end cap colour Black Green Red Blue Black
** to ISO 8573-1: 2010 *** Maximum recommended operating temperature 25ºC (77ºF)
For maximum flow rate, multiply model flow rate by the correction factor corresponding to the minimum
Pressure correction factors operating pressure

4 5 6 7 8 10 12 14 16 20.7
Operating pressure barg (psig)
(58) (72) (87) (100) (115) (145) (174) (203) (232) (300)
7 barg - correction factor 0.76 0.84 0.92 1 1.07 1.19 1.31 1.41 1.51 1.73
65mm
60mm
71mm
Technical Notes
42mm
1. Direction of air flow is outside to in through the filter element.
65DPUG3 65DPIG 2. Pop up indicators (65DPUG3) are fitted to models A30025 to A30050 as standard. Differential pressure indicators (65DPIG) are fitted to
models A30070 to A31500 as standard. Activated Carbon (AC) grade filters do not include DP equipment. Volt free contact options are
B A B A available upon request - see price guide.
3. Manual drain valves (MDV25 on models A30006 to A30050 and MDVE25 on models A30070 to A31500), are fitted as standard.
4. Activated Carbon Filters must not operate in oil saturated conditions and will not remove certain types of gases including carbon monoxide
(CO) and carbon dioxide (CO2).
C C 5. Alpha Filters are manufactured from cast aluminium alloy and are PED 2014/68/EU compliant for group 2 gases.
6. Threaded connections are Rp (BSP Parallel) to ISO 7-1 or NPT to ANSI/ASME B1.20.1 if supplied within North America. Rc (BSP Taper) to
ISO 7-1 also available.
7. For NPT threads, add the suffix N, e.g., A30070NRXA, and for Rc threads add the suffix C, e.g. A30070CRXA.
32mm 8. Filters are suitable for use with mineral and synthetic oils plus oil-free compressed air applications.
D approx. 9. Filter elements should be changed every 12 months / 8000 hours (whichever comes first). Activated carbon filter elements should be
D 39mm changed every 6 months.
approx.
WFL1062 Rev-A-UK 0220

A30006 to A30070 to
A30050 A31500
CRN
Walker Filtration Ltd Birtley Road, Washington, Tyne & Wear, NE38 9DA, United Kingdom.
tel: +44 (0) 191 417 7816 fax: +44 (0) 191 415 3748 email: [email protected] web: www.walkerfiltration.com