Scribd
Upload
84 views3 pages

Torque Wrench 40-200 NM With Exchangeable Ratchet Head: General Workshop Equipment

This document provides information about a torque wrench that can be adjusted to the desired torque and has exchangeable ratchet heads available in different sizes. It includes the technical specifications of the torque wrench as well as information about calibration and replacement parts.

Uploaded by

Bruno Mariano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
84 views3 pages

Torque Wrench 40-200 NM With Exchangeable Ratchet Head: General Workshop Equipment

This document provides information about a torque wrench that can be adjusted to the desired torque and has exchangeable ratchet heads available in different sizes. It includes the technical specifications of the torque wrench as well as information about calibration and replacement parts.

Uploaded by

Bruno Mariano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

2 259 534

En
Issue 2
General workshop equipment Group H
Replaces 587 072

Torque wrench 40-200 Nm


with exchangeable ratchet head
General
The torque wrench can easily be adjusted to the
desired torque by turning the rotary control at
the end of the handle. There is no risk that
overloading the tool will damage it because the
mechanism stops operating as soon as the set
torque is reached.
The torque wrench is supplied with a 1/2"
exchangeable ratchet head with 14x18 mm
drive.
Exchangeable ratchet heads with 14x18 drive
are available in the following sizes: 3/8",
1/2" and 3/4".

Technical data
Torque (Nm) 40 - 200
Accuracy (+/- %) 3
Total length (mm) 455
Weight (g) 1,535
Tool carrier 14x18
for insert tools (mm)
Driving pin 1/2"

Parts
Part No. Description Drive
2 271 898 Ratchet head 3/8" 14x18
2 271 899 Ratchet head 1/2" 14x18
2 269 246 Ratchet head 3/4" 14x18

©
Scania CV AB 2014-04 1
2 259 534

Calibration
Recommended interval: twice a year
Refer to the user manual for correct
specification and calibration interval.

2 ©
Scania CV AB
2 259 534

©
Scania CV AB 3

You might also like