Scribd
Upload
24 views2 pages

TDC For Fastner r.0 5.2.24

Uploaded by

PRASHANT

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt

TDC For Fastner r.0 5.2.24

Uploaded by

PRASHANT
24 views2 pages

Original Title

Tdc for Fastner r.0 5.2.24 (2)

Copyright

© © All Rights Reserved

Available Formats

PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
24 views2 pages

TDC For Fastner r.0 5.2.24

Uploaded by

PRASHANT

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 2

PETROCHEMICAL AND LUBE INTEGRATION PROJECT “LuPech” (J-18)”

AT IOCL
GUJARAT REFINERY, VADODARA, GUJARAT,INDIA
EPCC-5 PACKAGE (MS BLOCK AND OCTAMAX UNIT)

PURCHASE ORDER NO.: SBU - O & G (OIL, GAS & HYDROCARBONS)/LUPECH J18 -IOCL-MS BLOCK/500054/20537

VENDOR NAME: ARTSON ENGINEERING LIMITED

PMC DOCUMENT NO.: 077154C-27794927-0000-AEL03-QCA-B1203-005

CONTRACTOR DOC NO.: 500054-TPL-20537-F999-00005

DOCUMENT TITLE: TDC FOR FASTENERS

CHARGE HEATER CONDENSATE DRUM(1835-V-009) &


ITEM DESCRIPTION
STABILIZER REBOILER CONDENSATE DRUM(835-V-011)

TAG NO: (1835-V-009) & (835-V-011)

REVISION NO: 0 REV. DATE 05.02.2024

DOCUMENT CATEGORY A REV. OBJECT IFA

Technip Energies Review Stamp

Additional information which Contractor wants to mention

0 05.02.2024 ISSUE FOR APPROVAL Amit Saroj Samir Ipar Samir Ipar

PURPOSE/ DESCRIPTION OF
REV. DATE Written by Checked by Approved by
REVISION
Artson Engineering Limited
D-5, MIDC, Ambad, Nashik-422010

Document no: - 077154C-27794927-0000-AEL03-QCA-B1203-005, R.0 Date: - 05.02.2024

Technical Delivery Condition of Fasteners for Vessels.

1) Material: - Fastener SA 193 GR B16 & SA 194 GR 4

2) Governing Code: - ASME Sec.II, Part-A, Edition-2021.

3) Specification & Grade: - As per above material specification.

4) Chemical Analysis: - As per above material Specification.

5) Mechanical Properties: - As per above material specification.

6) Heat Treatment: - As per above material specification.

7) Manufacturer’s Test Certificate: - Required (MTC shall be to EN10204 Type 3.1.

8) Visual Inspection: - All Fasteners shall have workman like finish and shall be free from
injurious defects.

Hardness of Nuts shall be approx 15 BHN less than associated hardness of studs.

Prepared by Checked by Approved By

Amit Saroj _ AEL QC Amit Saroj _ AEL QC Samir Ipar _ AEL MQC

Page 1 of 1

You might also like