/

***********************************************************************************
**************************************
DEVELOPED BY: ARTUR FERREIRA MOREIRA
DATE: MAY, 13 OF 2017
EMAIL: [email protected]
WEBPAGE: http://daedalusstone.com/
INSTAGRAM: https://www.instagram.com/artur31415/
GOOGLEPLAY: https://play.google.com/store/apps/developer?id=Synapse
YOUTUBE: https://www.youtube.com/channel/UC6blOB30re0J-Oiksqaob1g/videos
GITHUB: https://github.com/artur31415
TWITTER: https://twitter.com/artur31415
LINKEDIN: https://www.linkedin.com/in/artur31415

///////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////
[ENG-USA]
This library was developed to work with the Android app "Controllium", with
which,
you can control your ESP8266 projects using your Android device.
Through the library you can attach any of the UI elements to the Arduino
hardware pins
accordingly to theirs functionalities.
You can use widgets to send and receive data from the ESP8266 using you
Android Device.
Look at the examples to understand how the library works.

Any Ideas or criticism, email me.

Have fun!
[PT-BR]
Esta biblioteca foi desenvolvida para trabalhar com o aplicativo Android
"Controllium", com o qual,
Você pode controlar seus projetos de ESP8266 usando seu dispositivo Android.
Através da biblioteca você pode anexar qualquer um dos elementos UI para os
pinos de hardware arduino
De acordo com s uas funcionalidades.
Voce pode usar widgets para enviar e receber dados do ESP8266 usando o seu
dispositivo Android.
Veja os exemplos para entender como funciona a biblioteca.

Quaisquer idéias ou críticas, email me.

Divirta-se!
///////////////////////////////////////////////////////////////////////////////////
///////////////////////////////////////
// LedMatrix
//
///////////////////////////////////////////////////////////////////////////////////
///////////////////////////////////////
[ENG-USA]
In this example each off the nine leds on the controller on the android app are
toggle, one at a time, at every
one second. And the switch on the controller toggles on and off a pin on the
ESP8266.

[PT-BR]
Neste exemplo cada um dos nove leds no controle no aplicativo android tem os
seus estados logicos invetidos, um de
 cada vez, a cada um segundo. E o switch no controle liga e desliga um pino na
ESP8266.
***********************************************************************************
***************************************/

#include <Controllium.h>

#include <ESP8266WiFi.h>

//Wifi SSID and Pass

const char* ROUTER_SSID = "YOUR_SSID";
const char* ROUTER_PASS = "YOUR_PASS";

//Soft AP SSID and Pass

char* SOFT_AP_SSID = "Controllium";
char* SOFT_AP_PASS = "0123456789";

//ESP8266 DIGITAL PINS

int D[] = {16, 5, 4, 0, 2, 14, 12, 13, 15};

//variable used to control the blinking of the "alive" led

long ledBlinkLastTime = 0;

//variable used to control the controller led blink on the app

long lastTimeUIBlink = 0;

//variable to index the nine leds on the controller on the app

int LedAnimationCounter = 1;

//Controllium object
Controllium controllium("ESP_LedMatrix");//Name of this device, if you have more
than one connected, provide a different name to each

///////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////
//// UTILS FUNCTIONS BEGIN
/////
///////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////

//Jusy a function to blink a pin

void blink(int pin)
{
for(int i = 0; i < 2; ++i)
{
digitalWrite(pin, LOW);
delay(50);
digitalWrite(pin, HIGH);
delay(50);
}

digitalWrite(pin, LOW);
delay(100);
}

//Setup Soft AP
void setupAP()
{
 WiFi.mode(WIFI_STA);
WiFi.disconnect();

delay(100);

randomSeed(analogRead(A0) + analogRead(A0));
sprintf(SOFT_AP_SSID, "%s_%04d", SOFT_AP_SSID, random(1023));

WiFi.softAP(SOFT_AP_SSID, SOFT_AP_PASS, 6);

}

//Try to connects to WIFI

//If it fails, returns false
//Otherwise, returns true
bool connectToWifi()
{
WiFi.begin(ROUTER_SSID, ROUTER_PASS);

// Wait for connect to AP

Serial.print("\n\nConnecting to ");

Serial.println(ROUTER_SSID);

int tries=0;

while (WiFi.status() != WL_CONNECTED)

{
delay(500);
Serial.print(".");
tries++;
if (tries > 30)
{
break;
}
}

Serial.println();

if (tries > 30)

{
Serial.println("Failed To Connect, initializing the Soft AP!\n\n");
return false;
}

return true;
}
///////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////
//// UTILS FUNCTIONS BEGIN
/////
///////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////

void setup()
{
//Init the serial for debug
Serial.begin(115200);

//Init the ESP pins

for(int i = 0; i < 9; ++i)
{
pinMode(D[i], OUTPUT);
digitalWrite(D[i], LOW);
}

if(connectToWifi())//Try to connect to WIFI

{
Serial.println("Connected!");
Serial.print("IP Address: ");
Serial.println(WiFi.localIP());

digitalWrite(D[1], HIGH);// Pin to show that it is connected to wifi

}
else//Otherwise, setup a soft AP
{
setupAP();

Serial.println("Soft AP On!");

Serial.print("\nSSID = ");
Serial.println(SOFT_AP_SSID);
Serial.print("PASS = ");
Serial.println(SOFT_AP_PASS);

Serial.print("IP Address: ");

Serial.println(WiFi.softAPIP());

digitalWrite(D[2], HIGH);// Pin to show that it is NOT connected to wifi

}

//Begin server
Serial.print("\nUdp server started at port ");
Serial.println(UDP_DEFAULT_PORT);
controllium.BeginUdpServer(UDP_DEFAULT_PORT);

//Instantiate Controllium Devices and add them to the controllium object

ControlliumDevice switch0("SWITCH_0", DEVICE_TYPE_BUTTON, "0");

ControlliumDevice led0("LED_0", DEVICE_TYPE_LED, "0");

ControlliumDevice led1("LED_1", DEVICE_TYPE_LED, "0");
ControlliumDevice led2("LED_2", DEVICE_TYPE_LED, "0");
ControlliumDevice led3("LED_3", DEVICE_TYPE_LED, "0");
ControlliumDevice led4("LED_4", DEVICE_TYPE_LED, "0");
ControlliumDevice led5("LED_5", DEVICE_TYPE_LED, "0");
ControlliumDevice led6("LED_6", DEVICE_TYPE_LED, "0");
ControlliumDevice led7("LED_7", DEVICE_TYPE_LED, "0");
ControlliumDevice led8("LED_8", DEVICE_TYPE_LED, "0");

controllium.AddDevice(switch0);

controllium.AddDevice(led0);
controllium.AddDevice(led1);
controllium.AddDevice(led2);
controllium.AddDevice(led3);
controllium.AddDevice(led4);
controllium.AddDevice(led5);
 controllium.AddDevice(led6);
controllium.AddDevice(led7);
controllium.AddDevice(led8);

Serial.println("Waiting for clients to connect...");

}

void loop()
{
//Just a blinking led to show that the device is alive
if(millis() - ledBlinkLastTime > 2000)
{
ledBlinkLastTime = millis();
blink(D[3]);
}

if(controllium.Update(200))//Returns true if a new msg was received

{
Serial.println("New MSG!\n\n");

//SWITCH_0 TO pin
float val = (float)controllium.GetDevice("SWITCH_0")->GetDoubleValue();
if(val >= 0)
digitalWrite(D[4], (int)val);
}

//Toggle all nine leds on the app at every 1 second

if(millis() - lastTimeUIBlink >= 1000)
{
lastTimeUIBlink = millis();

//Toggle the actual led on the controller

controllium.GetDevice(LedAnimationCounter)->ToggleState();
if(controllium.GetDevice(LedAnimationCounter)->GetDoubleValue() == 0 &&
controllium.GetDevice(LedAnimationCounter)->GetPreviousDoubleValue() == 0)
{
++LedAnimationCounter;
if(LedAnimationCounter >= 9)
LedAnimationCounter = 1;
}
}
}