Scribd
Upload
278 views1 page

Bms 4550 T.data

The document discusses a 1-inch compression driver that delivers outstanding sound quality in a small package. It has a patented design, high sensitivity, extended frequency response up to 20 kHz, and can handle high power. The driver uses a unique voice coil technology for improved heat dissipation and reliability.

Uploaded by

Raju
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
278 views1 page

Bms 4550 T.data

The document discusses a 1-inch compression driver that delivers outstanding sound quality in a small package. It has a patented design, high sensitivity, extended frequency response up to 20 kHz, and can handle high power. The driver uses a unique voice coil technology for improved heat dissipation and reliability.

Uploaded by

Raju
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1” Compression Drivers 4550

1” High frequency compression driver

Features:
Unique patented design
113dB sensitivity 1W/1m
800 Hz Crossover
Extended high frequency response up to 20 kHz
Small size and low weight
44.4 mm sandwich in- and outside voice coil
Compression

BMS 4550 is a powerful 1" professional compression driver BMS 4550, CD 90/75 Horn, SPL 1W / 1m
that delivers outstanding sonic quality in a small package. It
Drivers

has an exceptional dynamic range and produces even the most


complex music signals with depth and definition. The BMS
exclusive voice coil technology employs a light weight Copper
Clad Aluminium wire wound inside and outside of the Kapton™
former to improve the heat dissipation, dramatically increasing
the acoustic output and reliability of the driver while minimising
the power compression. The BMS 4550 - 1" compression driver
is designed for a wide variety of applications in high quality,
high power professional reinforcement systems and stage
monitors where low crossover frequency is needed.

SPECIFICATIONS BMS 4550, CD 90/75 Horn, SPL 1W / 1m

Throat diameter 1” (25.4 mm)


Nominal impedance 8 or 16 Ohm
Power capacity (AES) 80 W
Peak Power 450 W

Sensitivity
CD Horn 90°x75°, 1W/1m 113 dB
Plane wave tube, 1mW 118 dB
Maximal SPL (cont.) 132 dB at 80 W
Frequency range 500 – 20000 Hz
Recommended crossover 800 Hz
Voice coil diameter 1.75” (44.4 mm)
Magnet material Ceramic
Flux density (Tesla) 2.0
Voice coil material Copper Clad Aluminium BMS 4550, CD 90/75 Horn, SPL 10W / 1m
Voice coil former Kapton™
Diaphragm material Polyester

MOUNTING INFORMATION
Overall diameter mm 123
Depth mm 52
Net weight kg 2.25
2x M6 holes, 180° on 76.2 mm diameter

46

You might also like