FAST technical articles - April 2022

Cockpit SATCOM
More connected, staying protected
Guillaume de Bony de Lavergne
Cockpit SATCOM Work Package Leader - Airbus

Rui Fernandes Dos Santos

Datalink and Communication Systems Specialist - Airbus

Pilots and ground staff rely on the cockpit SATCOM as an essential means to
communicate. Evolving user requirements and technology have led Airbus to review and
update the system.
Today, satellite constellation technology enables more throughput, taking into account
regulation requirements and the growing number of customers. However, whilst airlines
need and expect more connected IP-based applications, it is fundamental to ensure
aircraft systems remain protected.
The Light Cockpit SATCOM (LCS) provides a solution, using IP technology as well as
stringent data security barriers in accordance with regulations.

Since the early stages of commercial aviation, and in order to enhance safety, regulations have
required long-range communication means for flying over oceanic and remote areas. Initially
performed exclusively with HF voice communication, the cockpit SATCOM which operates in the L-
band radio frequency is now recognized as an alternative means of communication with the ATC (Air
Traffic Control) or AOC (Airline Operation Centre). For continental areas such as Europe, VHF is mainly
used thanks to a widely deployed, but increasingly congested, VHF ground network.
Note: Cabin SATCOM operates in Ku/Ka band radio frequency.

Typically, thanks to the EFB (Electronic Flight Bag) live weather forecast application, the crew on a
transatlantic flight can detect an unexpected approaching storm cell with potential turbulence as a
complement to the onboard weather radar. They can then call the ATC using the satellite
communication system to get clearance to change the flight plan.

The crew can also use the SATCOM to contact the AOC regarding, for example, an HF system fault
message alert during the flight which could impact the next flight dispatch. This enables maintenance
teams to be ready to check the fault on arrival and minimise delay.

LEGACY: VHF antenna on left and SATCOM on right

NEW: VHF antenna on left and new Light Cockpit SATCOM (LCS) on right

Ten ways to increase performance and efficiency

Operators equipped with the new Inmarsat LCS - in place of the previous-generation one - will gain:

1. more protection against cyber attacks

thanks to state-of-the-art data security mechanisms associated to IP technology introduction;
2. faster cockpit connectivity
with up to 200 kbps (compared to 30 kbps provided by previous generation);
3. EFB internet (IP) connectivity for flight crew
enabling uploading of live weather updates and in-flight briefing updates (requires FOMAX
communication router option).
As an example, NAVBLUE proposes an Electronic Flight Assistant Mission+ that takes
advantage of the full LCS capabilities. On previous generations, ACARS network was used
(capable of 30 kpbs).
4. optimised communication costs
by rerouting part of the ACARS traffic over the LCS IP communication channel (FOMAX
required).

And the new design means operators will benefit from:

5. lighter weight - with up to 50kg of weight reduction compared to previous generations;

 6. limited drag thanks to the low profile antenna;
7. lower power consumption - 5 to 6 times less than current SATCOMs;
8. lower maintenance costs, with less equipment as the ELGA antenna integrates a DLNA
(Diplexer & Low Noise Amplifier) and a Power Amplifier;
9. an easier, data-loadable system as the unit does not need removing from the aircraft FLS
(Field Loadable Software). FLS is retrievable from the AirbusWorld customer portal thanks to
the dematerialisation initiative (no more physical media);
10. a common linefit and retrofit solution for the A320, A330 and A350 families. There are also
provisions on A320 to allow a later retrofit installation - to address lessors’ configuration
needs, for example.

Airbus Customer Support will become the primary interface for operators, instead of going via the
supplier, resulting in quicker outage resolution. Airbus will coordinate with all other parties
(including the supplier) as required.

LCS simplified system

The new cockpit SATCOM is lighter and brings increased performance, but with a much simpler
system composed of:

A computer (SDU), located in the avionic bay, managing all SATCOM functions (operational and
maintenance) and ensuring interface with avionics.
A configuration module (SCM / SDU Configuration Module) embedding SIM card, certificates for
secured communication with the ground, configuration of the system and the phone directory.
 A new generation compact / low profile antenna ensuring communication with satellites
integrating also power amplifier, filters and splitters (ELGA).
A single coaxial cable between SDU and Antenna handling power supply, radiofrequency signals,
antenna monitoring data and antenna software loading.

How to operate LCS

Flight crew can operate and control LCS with the new radio control means RMP (Radio Management
Panel, cf FAST article Cockpit communication - New-generation audio system) or with the legacy
MCDU (Multipurpose Control and Display Unit) and ACP (Audio Control Panel), according to aircraft
configuration.

LCS flight crew training remains the same as legacy SATCOM implementations.

To operate LCS, airlines need to subscribe to a new service contract with usual Communication
Service Providers (CSP), the same actors as for current cockpit SATCOMs.

Data security protection

As LCS is introducing IP connectivity, security architecture functions & mechanisms are embedded in
order to protect the aircraft against cyber attacks:

Physical and logical segregation between each aircraft domain ACD (Aircraft Control Domain /
safety cockpit communication), AISD (Aircraft Information Services Domain / non-safety cockpit
communication);
Guaranteed Integrity of safety communication (ACD);
A shared security barrier (on aircraft and on ground gateway), based on PKI (Public Key
Infrastructure) mutual authentication and VPN (Virtual Private Network) tunnel, is implemented
to complement the ground security barrier managed by the satellite service provider;
Filtering communication coming from the ground via Firewall.
The LCS flight test campaign
During the development phase of the LCS, flight tests were conducted on several Airbus aircraft types.
More than 70 hours of dedicated flight were performed. The objective was mainly to check the correct
behaviour of the SATCOM interconnected to the avionics, ensure there was no interference with other
Communication/Navigation/Surveillance systems, evaluate the end-to-end connectivity performance
through satellite space and also the ground segment during all phases of flight and all flight envelope
of the aircraft. Flight crew workload and Human Machine interface were also evaluated.

Jim FAWCETT, Lead Flight Test Engineer and specialist in communications systems describes the
experience: “We operated our flight test aircraft throughout the whole of the flight domain to ensure
good SATCOM coverage even in case of manoeuvring. To ensure good geographical coverage and
correct voice and data service behaviour at satellite handover boundaries, we even operated our A350
on a 12-hour flight from Toulouse in France to Gander in Canada and back, without landing! Our crews
found the HMI (Human Machine Interface) intuitive and easy to use. The system behaved well and
should provide a secure solution for our customers in the years ahead.”

LCS and regulations

This new system is compliant with the following regulations:

CAAC AOC voice communications connection within 4 mn requirement

RCP240 and RSP180 for North Atlantic, South Pacific and Y1, Y2, Y3, & L888 routes in China
FANS 1/A
AC 20-150B - Airworthiness Approval of Satellite Voice (SATVOICE) Equipment supporting Air
Traffic Service Communication
Aircraft normal tracking ICAO recommendation through AOC
LCS Inmarsat has been designed to be compliant with up-to-date EUROCAE and ARINC
standards

Understanding end-to-end satellite communication

SATCOM enables aircraft to exchange information with ground end users, typically ATC and AOC.
Communication can be done either by voice or datalink means using IP network layer communication
protocol.

Exchanges with ATC are essential to prevent collisions, ensure and optimize the traffic in controlled
airspace. Aircraft automatically report their position (ADS-C) and also exchange data via pre-formatted
messages (CPDLC) to allow controllers to safely guide aircraft to their destination (routine operations).
Both functions are part of FANS application (FANS 1/A in oceanic and remote areas). Flight crew can
contact or be contacted by ground control by voice means (SATVOICE function) in distress,
emergency or flight safety situations (non-routine operation). Such communication exchanges
supporting safe operation of aircraft are part of the Aircraft Control Domain(ACD). These critical
communications must demonstrate minimum end-to-end performance known as PBCS
(Performance-Based Communication and Surveillance). PBCS defines a minimum performance to
allow an aircraft to use optimized routes (therefore allowing fuel savings).

Exchanges with AOC allow airlines to support aircraft operational efficiency. It is part of Airline
Information Services Domain (AISD). Aircraft can receive and send preformatted automatic
maintenance reports via the ACARS network. To support flight operations, crews can request weather
data updates during flight to optimize flight path while ensuring passenger comfort (cf FAST article
EFB the new standard). Aircraft also send maintenance reports to the ground automatically, in order to
anticipate dispatch and maintenance activities after landing. Voice calls offer also the possibility for
pilots to exchange operational information complementary to ACARS with their airline control centers.

Passenger Information and Entertainment Services Domain (PIESD) encompasses all passenger
services, mostly known as IFE (In-Flight Entertainment) and includes video streaming, passenger
internet and intranet browsing, access to social media... This domain is today handled by cabin
 SATCOM (average throughput 20/30 Mbps) but cockpit SATCOM with cabin capability can fulfil it
(throughput <1 Mbps) for basic need and/or as a backup for cabin SATCOM means.

All cockpit communications to/from aircraft are routed through Satellite Service Providers (SSP)
infrastructures (Satellite, Gateway/GES). Today two SSP are recognised to be used by commercial
aviation to exchange aircraft cockpit data with ground users: Inmarsat and Iridium.

Then depending on the communication domain they are routed from SSP gateways to ground end
users in the following way:

via Communication Service Providers (CSP) to end users Air Traffic Control (ACD) or Airline
Operation Centers (AISD) that relay communications in a secure way while ensuring
performance. Two CSP are today recognised to be used by Commercial aviation to exchange
Aircraft Cockpit data with ground users ATC/AOC : Collins Aerospace (formerly ARINC) and SITA
directly to the Internet network for PIESD.

The LCS relies on the Inmarsat L-Band satellite constellation (today ensured by four I-4 satellites, to be
complemented and superseded tomorrow by I-6 ELERA satellites network operating in geostationary
orbit) using SB-Safety 2.0 services. Inmarsat site

Next steps
The following evolution compatible with LCS Inmarsat is under development (FANS C over SATCOM -
cf FAST article FANS C on page 34). This future capability, under development, will enable the use of
SATCOM for ATC datalink communications over ATN (Aeronautical Telecommunication Network). It
will provide an alternate means to alleviate the European VHF datalink network, expected to be
saturated in the near future, especially in high density areas, mitigating the risks of quality degradation
of datalink services for ATC and AOC. FANS C over SATCOM will enter into service on A320 and A330
aircraft families and will be capable of 4D Trajectory Based Operations (new mandate from 2028).

The LCS proposes a light and efficient SATCOM solution. Beyond standard SATCOM voice
and datalink usage, the LCS will unlock the use of new connected applications such as
Mission+ from NAVBLUE (an Airbus subsidiary). Airlines will have new means to optimize
their operations.

It provides a high data security level, with reduced maintenance costs and power
consumption. It is designed for easy upgrades.

Operators started flying with the LCS at the end of 2021 on both A330 and A320 Family
aircraft. It is now offerable to airlines for the A350, with entry into service planned in 2023.

Glossary

ACARS: Aircraft Communications Addressing and Reporting System

ADS-C: Automatic Dependant Surveillance - Contract
CAAC: Civil Aviation Administration of China
CPDLC: Controller Pilot Datalink Communication
ELGA: Enhanced Low Gain Antenna
FANS: Future Air Navigation System
FOMAX: Flight Operations and Maintenance Exchanger
GES: Ground Earth Station
HF: High Frequency
HPA: High Power Amplifier
ICAO: International Civil Aviation Organization
IP: Internet Protocol
MCU: Modular Concept Unit
RCP: Required Communications Performance
RSP: Required Surveillance Performance
SATCOM: Satellite Communication
SSP: Satellite Service Provider
VHF: Very High Frequency

From left:
Guillaume de Bony de Lavergne
Cockpit SATCOM Work Package Leader - Airbus
[email protected]

Rui Fernandes Dos Santos

Datalink and Communication Systems Specialist - Airbus
[email protected]

Photos and illustrations copyright Airbus. S. Ramadier. For Master Films: P. Pigeyre, A. Doumenjou.

To view other FAST articles: download the FAST app (App Store and Google Play) or read in
aircraft.airbus.com