Liebherr LH35M Material Handler Brochure

Material Handling Machines
LH 30 Industry LH 35 Industry
Operating Weight:
58,400 – 70,300 lb
Engine:
140 kW / 188 HP (SAE J1349)
140 kW / 190 HP (ISO 9249)
Stage Tier 4f
LH 30 M Industry Litronic Performance
Operating Weight: Power plus speed –
58,400 – 64,200 lb* Redefined performance
Engine:
140 kW / 188 HP (SAE J1349)
140 kW / 190 HP (ISO 9249)
Stage Tier 4f
LH 35 M Industry Litronic
Operating Weight:
67,700 – 70,300 lb*
Engine:
140 kW / 188 HP (SAE J1349)
140 kW / 190 HP (ISO 9249)
Stage Tier 4f
LH 30 C Industry Litronic
Operating Weight:
59,700 – 66,600 lb*
Engine:
140 kW / 188 HP (SAE J1349)
140 kW / 190 HP (ISO 9249)
Stage Tier 4f
* Without working tool
2 LH 30 Industry Litronic LH 35 Industry Litronic

Economy Reliability Comfort Maintainability
Good investment – Durability and sustainability – Perfection at a glance – Efficiency bonus – Even with
Savings for long-term Quality down to the last detail When technology is comfortable maintenance and service
LH 30 Industry Litronic LH 35 Industry Litronic 3

Performance
Power plus speed –

Redefined performance
Liebherr has been designing and manufacturing successful machines for material handling for
over 50 years. The new generation of Liebherr handlers, the LH 30 and LH 35 are high perfor
mance yet economical machines specially designed for using in scrap recycling, in timber yards
and also for handling of bulk materials.

Maximum Handling Capacity Precision Operation
Increased Engine Output Intelligent Electronics

Engine output has been increased from 129 kW to 140 kW The elaborate machine controls guarantee that the hydraulics
compared to the predecessor models, giving the system more are optimally configured for the task at hand. Here, the load
torque for more powerful and faster movement. Furthermore, sensing control ensures that the flow delivered by the pump
load peaks are compensated cleverly, meaning maximum is optimally distributed when movements overlap. Speed and
torque is available at all times for maximum handling capacity. power are available whenever they are needed.
High Swing Torque Sensitive Hydraulics

The separate hydraulic pump in the closed slewing circuit only The optimal harmonisation between the engine and the control
supplies hydraulic fluid to the swing mechanism. The maximum valve allows a fast and direct response from the hydraulics to
delivery volume is thus available at any time for turning the the input command. This is controlled proportionally to enable
uppercarriage for fast and dynamic rotational movements. smooth and gentle movements to be executed when the joy
stick is moved.
Captivating Dynamics
The combination of 140 kW of engine output and an increased Firm and Stable Positioning
pump delivery volume guarantees maximum acceleration and An essential prerequisite for precise working and maximum
speed of working motions. handling capacity is the firm and stable positioning of the ma
chine. The design of the Liebherr undercarriage optimizes the
way forces are induced on components and minimized stress.
Together with the elaborate support geometry, maximum
stability and durability are guaranteed.
Liebherr Diesel Engine Closed

Compliant with Tier 4f Slewing Circuit Travel Motor
• Powerful, robust and reliable • High torque for maximum acceleration and • Powerful, robust, reliable and quiet
• Maximum torque even at low speeds fast rotary movements • Better performance even on uphill grades
to ensure fast movements with low fuel • Integrated speed sensor for controlling and due to electrical swivel angle adjustment
consumption monitoring braking movement for greater for more torque, maximum acceleration and
• Common rail injection system for maximum safety more driving power
efficiency • Greater fuel efficiency thanks to intelligent • Fuel efficiency at maximum speed due to
• Emissions treatment with Liebherr SCR energy management in the closed system optimal adjustment of speed and delivery
technology volume

Economy
Good investment –
Savings for long-term
Liebherr material handling machines combine high productivity with excellent economy – all
as standard. Liebherr manages to achieve this difficult goal through sophisticated engine
technology from its own production and improved demand-controlled hydraulics.

Fuel Efficiency Increased Productivity
Low Engine Speeds Working Tools and Quick Coupling Systems

Compared to the predecessor model, the engine speed has Liebherr offers a wide selection of working tools for every
been reduced from 1,800 rpm to 1,700 rpm. The machine’s application to increase the productivity of its material handling
operating point has thus been optimized for outstanding fuel machines. In addition the material handlers can be fitted with a
efficiency at maximum handling capacity. Liebherr quick coupling system which increase the productivity
of the machine by up to 30 %. The matching working tool and
Engine Idling and Engine Shut-down quick coupling system combined with the outstanding dynam
The standard automatic idling function reduces the engine ics of a Liebherr handler ensures highest handling capacity and
speed to idle as soon as the operator takes his hand from the maximum productivity.
joystick so that no hydraulic function is activated. Proximity sen
sors in the joystick levers restore the original engine speed as Efficient Management
soon as the operator’s hand is moved towards the lever again. LiDAT, Liebherr’s own data transmission and positioning sys
This ensures that the set engine speed is available immediately. tem, facilitates efficient management, monitoring and control
The result is a combination of fuel saving and reduced noise of the entire fleet park in terms of machinery data recording,
levels. Operating costs can be reduced even further with the data analysis, fleet park management and service. All of the
optional automatic engine shut-down function. important machinery data can be viewed at any time in a web
browser. LiDAT offers you comprehensive work deployment
Closed Hydraulic Circuit for the Swing Mechanism documentation, greater availability thanks to shorter down
The closed slewing circuit feeds the braking energy back times, faster support from the manufacturer, quicker detection
into the system when the uppercarriage is braked. Here, new of strain / overload and subsequently a longer service life of the
standards are set in terms of efficiency and economy. Simple machine as well as greater planning efficiency in your company.
yet effective. This service includes 1 year of use without charge as standard
for the material handlers LH 30 and LH 35.
Max
Specific fuel consumption
LPE
Max
[g/kWh]
Power [kW]
Min
Working range
Engine speed [rpm]
Perfect operating point with LPE Output

Operating point without LPE Specific fuel consumption
Low Fuel Consumption Thanks Liebherr-

to Intelligent Machine Control Working Tools Eco-Mode
• Liebherr-Power Efficiency (LPE) optimizes • Robust and service-friendly slewing drive, • Reducing the engine speed by pressing a
the interaction of the drive components in can be turned 360° button
terms of efficiency • Optimum filling and clamping performance • Lower fuel consumption with unchanged
• LPE enables machine operation in the for effective material handling high performance
area of the lowest specific fuel use for less • Finite element method (FEM) optimized for a • Economical and environmentally friendly
consumption and greater efficiency with the perfect relationship between grapple weight, working guaranteed
same performance volume and a very long service life • Ideal for light to medium operations

Reliability
Durability and sustainability –

Quality down to the last detail
Every day Liebherr material handlers show their qualities in a very wide range of industrial
applications all over the world. Years of experience, continuous development and the latest
technologies provide maximum safety in use. Their robust, compact design and the use of
components produced in-house ensure that the material handling machines LH 30 and LH 35
are designed for a long service life.

More Safety High Machine Availability
Pipe Fracture Safety Valves Quality and Competence

The standard pipe fracture safety valves on the stick and Our experience, understanding of customer needs and the
hoist cylinders prevents the attachments from dropping in an technical implementation of these findings guarantee the suc
unregulated way and ensure maximum safety during every cess of the product. For decades, Liebherr has been inspira
operation. tional with its depth of production and system solutions. Key
components such as the diesel engine, electronic compo
Working Range Limiters nents, slewing ring, swivelling drive and hydraulic cylinders are
For operations in which the working range should be limited, developed and produced by Liebherr itself. The great depth of
the material handling machines can be equipped optional with in-house manufacturing guarantees maximum quality and en
a working range limitation feature. Hereby all types of dimen sures that components are optimally configured to each other.
sions can be set: height, depth, width and proximity. Collisions
and resulting component damage can thus be avoided. Robust Design
All steel components are designed and manufactured by
Overload Warning Device and Load Torque Limitation Liebherr itself. High-strength steel plates configured for the
The acoustic and visual overload warning system continuously toughest of requirements result in high torsional stiffness and
tells the operator about the current load situation of the ma optimum absorption of forces induced for a longer service life.
chine. Furthermore, load torque limitation automatically regu
lates the speed of the working hydraulics to allow the maximum Intelligent Self Diagnostics
load bearing capacity to be approached safely. In the event of The clever control electronics permanently monitor the vital
an overload, the functions which could cause the machine to functions of the machine to guarantee a high level of machine
topple are disabled. Only movements back to the safe working availability. Components which are critical for safety are de
range are then possible. signed with redundancy to guarantee maximum reliability.
QPDM – Quality and

Process Data Management Dust-intensive Jobs Attachment
• QPDM allows production data to be logged, • Large-dimension radiator with large mesh • Components enhanced using FEM for maxi-
documented and evaluated for optimum cooling performance even in mum service life even if subjected to heavy
• Automation of documentation and test very dusty places lateral stresses during demanding tasks
specifications • A new, sealed engine compartment prevent • Cables routed internally to protect them
• Ability to handle large quantities with dust penetration from damage
maintain uniform high quality • Reversible fan reduces the rate at which the • High load capacities with long reaches
engine and radiator become clogged and • Reaches up to 50 ft
guarantee good machine availability
• Folding air conditioning condenser for
quicker and easier cleaning

Comfort
Perfection at a glance –
when technology is comfortable
The newly designed operator’s work station sets new standards in comfort. The Liebherr de
luxe cab is spacious, has an ergonomic design and is very quiet. This ensures that the operator
remains intent and fully concentrated throughout the working day and enables him to deliver a
constantly high performance.

Deluxe Cab Comfortable Operation
Ergonomic Design Proportional Control

The modern cab design provides excellent conditions for Precision and fine control of the material handling machine are
healthy, concentrated and productive work in maximum especially important in applications such as waste separation
comfort. The colour touchscreen display, the controls and or scrap recycling. Thanks to the standard proportional control,
operator’s seat Comfort are all coordinated to form a perfect even such demanding operations can be mastered in style.
ergonomic unit. In addition the ergonomic joysticks allow the
machine operation to be both pleasant and precise. Steering and Stabilizer on Joystick
The standard joystick steering gives the operator an additional
Excellent All-round Vision comfort boost. The steering movement can be conveniently
The large areas of glass, different versions of cab elevations executed using the joystick, eliminating the need to reposition
and the rear and side area monitoring systems provide the op during the work cycle. Abandoning the steering wheel in favour
erator with an excellent view of his working area and the zone of joystick steering provides additional legroom and a clear
around the machine. This perfect view enhances the operator’s view of the working area. A new standard feature is the control
safety and ensures that he can handle the machine safely at all of the outriggers with the joystick for more comfort and an in
times. creased productivity of the machine.
Low Noise Levels Colour Touchscreen Display and Operation Unit

The use of viscoelastic mounts, good insulation and low-noise The 7" color touchscreen display is intuitive in its operation and
diesel engines from Liebherr minimizes noise emissions and provides continuous information about all important operating
vibrations. The noise levels are just 71 dB(A) in the operator’s data. The shortcut keys can be individually assigned and are
cab and 103 dB(A) outside. This means that the material han selected quickly and easily with the menu strip.
dlers LH 30 and LH 35 have low noise to preserve people and
the environment.
Safe Operator’s Seat Comfort Joystick

Access with Adjustable Armrests with Proportional Control
• Foldable arm console for a safe and comfor- • Greater seating comfort due to variable • Good functionality with streamlined,
table access damper hardness, lockable horizontal ergonomic design
• Wide, non-slip steps and ergonomically suspension, pneumatic lumbar support, seat • 4-way mini-joystick enables versatile possi-
positioned handles for an easy and safe heating and passive seat air conditioning for bilities of control without having to encom-
access concentrated working pass, for example steering, outriggers or
• All access systems are designed to national • Individual adjustment options for armrests, working tools
guidelines and statutory regulations seat cushion depth, seat angle and head • Each Joystick two buttons and a rocker
restraint for healthful working switch also increase the number of func-
tions and and thanks to the new design
maximum reliability are guaranteed

Maintainability
Efficiency bonus –
Even with maintenance and service
The Liebherr material handling machines LH 30 and LH 35 are powerful, robust, precise and
efficient. They also feature integral maintenance benefits as a result of their service-based ma
chine design. The maintenance work for the Liebherr material handlers can be carried out
quickly, easily and safely. This minimizes the material handling machine’s maintenance costs
and down times.

Elaborate Maintenance Concept Your Competent Service Partner
Service-based Machine Design Remanufacturing

The service-based machine design guarantees short servicing The Liebherr remanufacturing program offers cost-effective
times, thus minimizing maintenance costs due to the time it reconditioning of components to the highest quality standards.
saves. All the maintenance points are easily accessible from Various reconditioning levels are available: Replacement com
the ground and easy to reach due to the large, wide-opening ponents, general overhaul or repair. The customer receives
service doors. The enhanced service concept places the main components with original part quality at a reduced cost.
tenance points close to each other and reduces their number
to a minimum. This means that service work can be completed Competent Advice and Service
even more quickly and efficiently. Competent advice is a given at Liebherr. Experienced special
ist provide decision guidance for your specific requirements:
Integral Maintenance Benefits application-oriented sales support, service agreements, value-
Completing maintenance work helps keep the machine fully priced repair alternatives, original parts management, as well
functional. Maintenance work does, however, mean machine as remote data transmission for machine planning and fleet
down times which must be minimized. With change intervals management.
of 2,000 hours for engine oil and up to 8,000 hours for hydrau
lic oil Liebherr reduce the amount of maintenance significantly
and increase the productivity of the material handlers. In ad
dition, central lubrication systems assist to optimize the daily
amount of maintenance.
Lubrication Excellent Rapid Spare

as it Works Service Access Parts Service
• Fully automatic central lubrication system • Large, wide-opening service doors • 24-hour delivery: Spare parts service is
for uppercarriage and attachment • Engine oil, fuel, air and cab air filters are available for our dealers around the clock
• Can be extended as an option to the con- easily and safely accessible from the ground • Electronic spare parts catalogue:
nection link, quick coupler and working tool • The oil level in the hydraulic tank can be Fast and reliable selection and ordering via
• Fully automatic central lubrication system checked from the cab the Liebherr online portal
for the undercarriage available as an option • Short service times for more productivity • With online tracking, the current processing
• Lubricates without interrupting work to status of your order can be viewed at any
ensure better productivity and a long com- time
ponent service life

Material Handling Machines
Overview
Uppercarriage
• Greater fuel efficiency thanks to the latest
engine technology with intelligent machine
control
• 140 kW engine output and greater pump
flow for fast work cycles, convincing dynam-
ics and maximum handling performance
• Reversible fan and large-meshed cooler
as a reliable, sealed unit for high machine
availability
• Reduction in operating costs thanks to
built-in maintenance advantages and
optimum service accessibility
Undercarriage
• Optimized hydraulics with closed slewing
mechanism circuit for greater fuel efficiency
and faster work cycles
• Maximum acceleration and higher drawbar
pull thanks to a new travel motor for greater
travelling performance
• Load-holding valves fitted as standard on all
support cylinders for maximum stability in
every application
• Fewer downtimes thanks to maintenance-
free support cylinders

Operator’s Cab
• Joystick steering without steering column as
standard for convenient operation, greater
legroom and clear view of the working area
• Less strain on the operator, workers and
reduced environmental pollution due to
lower noise emissions
• Optimum visibility thanks to large glass
surfaces and standard rear and side area
monitoring with camera
• Proportional control as standard with 4-way
minijoystick for greater precision, high-
precision control and functions
Attachment
• High load capacities and long reaches
thanks to optimized kinematic properties
and robust construction for greater handling
performance
• Ingenious routing of hydraulic hoses
optimizes the oil flow and minimizes power
losses for maximum energy efficiency
• Pipe fracture safety valves on hoist and
stick cylinders and retract stick shut-off for
maximum safety during every application
• Quick coupling systems and working tools
made by Liebherr for maximum machine
capacity utilization and greater handling
performance

The Perfect Solution for Every Application
Shells for loose material
Angled stick
Multi-tine grab
Wood grab Stick with tipping kinematics
Straight boom
Sorting grab
Stick for scrap shear
Load hook
Angled boom
Magnet devices Flat angled stick
Working tools Sticks Booms

Cab Elevations
Hydraulic cab elevation Rigid cab elevation
Uppercarriage
Mobile Crawler
Undercarriage

Experience the Progress
The invention of the mobile tower crane in 1949 also marked the production of today’s material handling machines. The
the birth of the Liebherr company. During its first decade the A 911 mobile material handling machine a few years later
small construction company developed into an established enabled the company to make the breakthrough into material
manufacturer of construction machines and other technically handling. Over the years the machines have been developed
advanced products. The R 353 and its first industrial continually and today they are designed uncompromising for
attachment were launched in 1951 to lay the foundations for the industrial use.
First tower crane TK10
1949
First hydraulic cab elevation
Production plant in Kirchdorf 1983

1970
1961
1974
1968
R 353 with the first industrial Breakthrough with the A 911

attachment mobile material handler
Silenced material handling machine

Liebherr has now been developing and manufacturing material Years of experience in design and construction are not only
handling machines for a very wide range of applications in the reflected in the end product but also in the components which
scrap, port and timber handling sectors and for the waste and are developed, designed and manufactured by Liebherr itself.
recycling industry for over 50 years. In the development of its This multiple sector expertise is used in product design from
machines, Liebherr chooses quality, durability and reliability the early phase of the development process and thus allows
from the very outset, together with performance and economy. high level technical innovations to be made.
Opening of the assembly building Launch of the lightweight stick

for material handling machines
2007 2011 Launch of the new LH series
2013
2010
2014
Awarded the Bauma Design Prize Awarded the Bauma Innovation Prize
for the LH 120 for the ERC cylinder
Awarded the IF Award for the

material handling machine LH 60

Technical Data
Diesel Engine Hydraulic System

Rating Hydraulic pump
per SAE J1349 188 HP (140 kW) at 1,700 rpm for attachment 2 Liebherr axial piston variable displacement pumps
per ISO 9249 190 HP (140 kW) at 1,700 rpm and travel drive (double construction)
Model Liebherr D934 Max. flow 2 x 61 gpm
Type 4 cylinder in-line Max. pressure 5,076 psi
Bore / Stroke 4.8 / 5.9 in for swing drive reversible axial piston variable displacement pump,
Displacement 427,17 in3 closed-loop circuit
Engine operation 4-stroke diesel Max. flow 37 gpm
Common-Rail Max. pressure 6,092 psi
turbo-charged and after-cooled Hydraulic pump Liebherr-Synchron-Comfort-system (LSC) with
reduced emissions regulation and control electronic engine speed sensing regulation, pressure
Air cleaner dry-type air cleaner with pre-cleaner, primary and and flow compensation
safety elements Hydraulic tank 46 gal
Engine idling sensor controlled Hydraulic system 114 gal
Electrical system Hydraulic oil filter 1 main return filter with integrated partial micro
Voltage 24 V filtration (5 µm)
Batteries 2 x 135 Ah / 12 V MODE selection adjustment of engine and hydraulic performance via
Alternator three-phase current 28 V / 140 A a mode pre-selector to match application, e.g. for
Stage Tier 4f especially economical and environmentally friendly
Harmful emissions values in accordance with EPA/CARB-40CFR stage Tier 4f operation or for maximum material handling and
Emission control Liebherr-SCR technology heavy-duty jobs
Fuel tank 87 gal S (Sensitive) mode for precision work and lifting through very
Urea tank 12 gal sensitive movements
E (Eco) mode for especially economical and environmentally
friendly operation
P (Power) mode for high performance with low fuel consumption
P+ (Power-Plus) mode for highest performance and for very heavy duty
Cooling System applications, suitable for continuous operation
Diesel engine water-cooled Engine speed and stepless alignment of engine output and hydraulic
compact cooling system consisting cooling unit for performance setting power via engine speed
water, hydraulic oil and charge air with stepless Option Tool Control: ten preadjustable pump flows and
thermostatically controlled fan pressures for add on tools
Hydraulic Controls Swing Drive

Power distribution via control valves with integrated safety valves, Drive Liebherr axial piston motor in a closed system,
simultaneous actuation of chassis and attachment. Liebherr planetary reduction gear
Swing drive in separate closed circuit Swing ring Liebherr, sealed race ball bearing swing ring,
Servo circuit internal teeth
Attachment and swing with hydraulic pilot control and proportional joystick Swing speed 0 – 9.5 rpm stepless
levers Swing torque 56,055 lbf ft
Chassis Holding brake wet multi-disc (spring applied, pressure released)
Mobile electroproportional via foot pedal Option pedal controlled positioning swing brake
Crawler with hydraulic proportionally functioning foot pedals or
adjusted with plugable levers
Additional functions via switch or electroproportional foot pedals
Proportional control proportionally acting transmitters on the joysticks for
additional hydraulic functions

Operator’s Cab Undercarriage
Cab TOPS safety cab structure (tip-over protection) with Mobile
individual windscreens or featuring a slide-in subpart Drive oversized two speed power shift transmission with
under the ceiling, work headlights integrated in the additional creeper speed, Liebherr axial piston motor
ceiling, a door with a sliding window (can be opened on with functional brake valve on both sides
both sides), large stowing and depositing possibilities, Travel speed
shock-absorbing suspension, sounddamping insulating, Joystick steering 0 – 2.2 mph stepless
tinted laminated safety glass, separate shades for the (creeper speed + transmission stage 1)
sunroof window and windscreen 0 – 4.3 mph stepless
Operator’s seat (transmission stage 1)
Comfort air cushioned operator’s seat with 3D-adjustable arm- 0 – 7.5 mph stepless
rests, headrest, lap belt, seat heater, adjustable seat (creeper speed + transmission stage 2)
cushion inclination and length, lockable horizontal 0 – 7.5 mph stepless
suspension, automatic weight adjustment, adjustable (transmission stage 2)
suspension stiffness, pneumatic lumbar vertebrae Option
support and passive seat climatisation with active coal Wheel steering 0 – 2.2 mph stepless
Option (creeper speed + transmission stage 1)
Premium in addition to operator’s seat comfort: active electronic 0 – 4.3 mph stepless
weight adjustment (automatic readjustment), pneu- (transmission stage 1)
matic low frequency suspension and active seat clima- 0 – 8.1 mph stepless
tisation with active coal and ventilator (creeper speed + transmission stage 2)
Control system joysticks with arm consoles and swivel seat, folding 0 – 12.4 mph stepless
left arm console (transmission stage 2)
Operation and displays large high-resolution operating unit, selfexplanatory, Driving operation automotive driving using accelerator pedal, cruise
color display with touchscreen, video-compatible, control function: storage of variable accelerator pedal
numerous setting, control and monitoring options, positions
e.g. air conditioning control, fuel consumption, Axles 88,185 lb / 132,277 lb drive axles (LH 30 M / LH 35 M);
machine and tool parameters manual or automatic hydraulically controlled front axle
Air-conditioning automatic air-conditioning, recirculated air function, oscillation lock
fast de-icing and demisting at the press of a button, Option four wheel steering (LH 35 M)
air vents can be operated via a menu; recirculated air Service brake two circuit travel brake system with accumulator;
and fresh air filters can be easily replaced and are wet and backlash-free disc brake
accessible from the outside; heating-cooling unit, Holding brake wet multi-disc (spring applied, pressure released)
designed for extreme out-side temperatures, sensors Stabilization 4 point outriggers
for solar radiation, inside and outside temperatures Option dozer blade, at the front, for 4 point outriggers
Crawler
Versions LC, EW
Drive Liebherr compact planetary reduction gear with
Liebherr axial piston motor per side of undercarriage
Attachment Travel speed 0 – 1.9 mph stepless
Type high-strength steel plates at highlystressed points (creeper speed) LC-Undercarriage
for the toughest requirements. Complex and stable 0 – 1.9 mph stepless
mountings of attachment and cylinders (creeper speed) EW-Undercarriage
Hydraulic cylinders Liebherr cylinders with special seal system as well as 0 – 2.9 mph stepless LC-Undercarriage
shock absorption 0 – 2.5 mph stepless EW-Undercarriage
Bearings sealed, low maintenance Brake functional brake valves on both sides
Holding brake wet multi-disc (spring applied, pressure released)
Track pads triple grouser
Complete Machine
Lubrication Liebherr central lubrication system for uppercarriage
and attachment, automatically
Option
Mobile Liebherr central lubrication system for undercarriage,
automatically
Steps system parts hot-dip galvanized, nonskid surface
Noise emission
ISO 6396 L pA (inside cab) = 71 dB(A)
2000/14/EC LWA (surround noise) = 103 dB(A)
LH 30 Industry Litronic LH 35 Industry Litronic21

LH 30 M – Dimensions
9'6" 8'6"
LH30
10'9"
8'9"
4'5"
13.9"
2.8"
US_H0728
3'11" 4'7" 3'11"
9'2" 9"
17' 12'10"
18' 14'1"
LH 30 M – Choice of Cab Elevation

Cab Elevation LFC Cab Elevation LHC
(Rigid Elevation) (Hydraulic Elevation)
D2
D1
C2
B2
C
B LH30 LH30
C1 E
B1
H0727
Increase type LFC 120 Increase type LHC 255

Height 3'11" B1 9' 3"
B 13' 2" B2 17' 7"
C 14' 8" C1 10' 9"
D 2' 7" C2 19' 1"
A rigid cab elevation has a fixed eye level height. For a lower transport height, the shell of D1 4' 5"
the cab can be removed and replaced by a transport device. The dimension C is in this D2 4'10"
machine design for all rigid cab elevations 11'9". E 10' 7"
The hydraulically adjustable cab allows the driver, that he can choose his field of view
freely and at any time within the stroke.
Tires 10.00-20

LH 35 M – Dimensions
9'11" 8'6"
LH35
10'11"
8'11"
4'8"
10"
5.2" US_H0750
4'5" 4'11" 4'5"
9'10" 9'10"
18'9" 14'1"
19'4" 15'5"
LH 35 M – Choice of Cab Elevation

D2
D1
C2
B2
C
B LH35 LH35
C1 E
B1
H0749

Height 3'11" B1 9' 5"
B 13' 4" B2 17' 9"
C 14'11" C1 10'11"
D 2' 7" C2 19' 4"
Tires 12.00-20

LH 30 C LC – Dimensions
11'
9'11" 8'6" 30"
LH30
10'3"
8'2"
3'11" 3'3"
19.3"
US_H0756
6'3" 2"
12'7" 7'10"
15'2" 9'10"
17'6" 10'3"
18'11"
LH 30 C LC – Choice of Cab Elevation

D2
D1
C2
B2
C
B LH30 LH30
C1 E
B1
H0755

Height 3'11" B1 8' 8"
B 12' 8" B2 17' 1"
C 14' 2" C1 10' 3"
D 2' 7" C2 18' 7"
machine design for all rigid cab elevations 11'3". E 10'

LH 30 C EW – Dimensions
13'5"
9'6" 8'6" 30"
LH30
10'6"
8'6"
4'2"
3'5"
19.4"
US_H0764
7'6" 23.6"
14'9" 12'6"
17'7" 14'5"
18'3" 14'11"
18'6"
LH 30 C EW – Choice of Cab Elevation

D2
D1
C2
B2
C
B LH30 LH30
C1 E
B1
H0763

Height 3'11" B1 9'
B 12'11" B2 17' 4"
C 14' 5" C1 10' 6"
D 2' 7" C2 18'10"

LH 30 M – Attachment AF11
13
40
H0729
Operating Weight
12
The operating weight includes the basic machine with 4 point outriggers, hydr. cab eleva-
11
35 tion, 8 solid tires plus intermediate rings, angled boom 21'4", flat angled stick 16'5" and
10 grab model GM 20C / 1.96 yd3 shells for loose material.
30 9 Weight 63,300 lb
8
25
7
20 6 Dimensions
5
15
4
LH30
10 3 10'8" 10'9"
2 LH30
5
1
US_H0730
0 0 20'4"
32'10"
-1
-5
-2
-10 -3
-4
-15
-5
-20 -6
-7
ft m 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m
40 35 30 25 20 15 10 5 0 ft
10 ft 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft 45 ft
ft Undercarriage ft in
Stabilizers raised 14,2* 14,2*
40 4 pt. outriggers down 14,2* 14,2*
13'10"
Stabilizers raised 13,0 14,2* 10,4 11,0*
35 4 pt. outriggers down 14,2* 14,2* 11,0* 11,0*
22' 8"
Stabilizers raised 13,3 15,9* 9,1 12,0 7,4 9,8
30 4 pt. outriggers down 15,9* 15,9* 13,9* 13,9* 9,9* 9,9*
27'11"
Stabilizers raised 13,3 15,9* 9,2 12,0 6,6 8,8 6,0 8,0
25 4 pt. outriggers down 15,9* 15,9* 14,2* 14,2* 12,1* 12,1* 9,4* 9,4*
31' 6"
20 4 pt. outriggers down 16,6* 16,6* 14,6* 14,6* 12,9 13,0* 9,3* 9,3*
34'
Stabilizers raised 19,0 22,2* 12,2 16,1 8,6 11,4 6,3 8,5 4,8 6,5 4,6 6,3
15 4 pt. outriggers down 22,2* 22,2* 18,0* 18,0* 15,2* 15,2* 12,7 13,2* 9,8 10,8* 9,4* 9,4*
35' 7"
Stabilizers raised 31,4 38,9* 17,0 23,5 11,2 15,1 8,0 10,8 6,0 8,2 4,6 6,4 4,3 6,0
10 4 pt. outriggers down 38,9* 38,9* 25,7* 25,7* 19,6* 19,6* 15,9* 15,9* 12,3 13,5* 9,7 11,4* 9,1 9,6*
36' 5"
Stabilizers raised 13,0* 13,0* 15,0 21,2 10,2 14,1 7,5 10,2 5,7 7,8 4,5 6,2 4,2 5,8
5 4 pt. outriggers down 13,0* 13,0* 28,2* 28,2* 20,7* 20,7* 15,7 16,4* 12,0 13,5* 9,5 11,1* 8,9 10,2*
36' 6"
35'11"
Stabilizers raised 12,6* 12,6* 13,0 19,0 8,9 12,7 6,7 9,4 5,3 7,4 4,4 6,1
– 5 4 pt. outriggers down 12,6* 12,6* 25,5* 25,5* 19,5* 19,5* 14,8 15,3* 11,5 12,0* 8,9* 8,9*
34' 7"
Stabilizers raised 12,9 18,9 8,8 12,5 6,6 9,3 5,3 7,5
– 10 4 pt. outriggers down 21,2* 21,2* 16,7* 16,7* 13,0* 13,0* 9,9* 9,9*
29' 7"
Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities on the stick end without attachment are stated in lb x 1,000 and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be
slewed through 360° with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+ / – 15°) are specified over the steering axle with
the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads based on the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity.
The lift capacity of the unit is limited by its stability, the lifting capability of the hydraulic elements, or the maximum permissible lifting capacity of the load hook.

LH 30 M – Attachment GA12
14
45 H0731
Operating Weight
13
40 The operating weight includes the basic machine with 4 point outriggers, hydr. cab eleva-
12
tion, 8 solid tires plus intermediate rings, straight boom 22'4", angled stick 16'5" and grab
35
11 model GM 65 / 0.78 yd3 semi-closed tines.
10 Weight 62,600 lb
30 9
8
25
7 Dimensions
20 6
5
15 LH30
4 10'9"
9'8"
10 3
2 LH30
5 US_H0732
1 22"
0 33'8"
0
-1
-5
-2
-10 -3
-4
-15
-5
-6
ft m 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m
40 35 30 25 20 15 10 5 0 ft
Stabilizers raised 17,8* 17,8* 13,9* 13,9*
18' 2"
Stabilizers raised 12,8 16,8 8,6 11,4 8,3 11,0
25' 6"
30' 4"
33' 7"
20 4 pt. outriggers down 22,0* 22,0* 18,2* 18,2* 15,5* 15,5* 12,7 13,4* 9,8 11,5* 9,3* 9,3*
36'
37' 6"
38' 2"
38' 5"
0 4 pt. outriggers down 6,5* 6,5* 21,2* 21,2* 20,2* 20,2* 14,8 15,7* 11,4 12,5* 9,2 9,6* 7,4* 7,4*
37'10"
Stabilizers raised 12,6 18,6 8,6 12,4 6,5 9,2 5,1 7,2 4,2 5,9 4,1 5,8
– 5 4 pt. outriggers down 19,8* 19,8* 17,8* 17,8* 14,0* 14,0* 10,9* 10,9* 7,6* 7,6* 7,0* 7,0*
35' 8"
– 10 4 pt. outriggers down 13,9* 13,9* 11,0* 11,0* 9,1* 9,1*
28' 5"

15 H0733
Operating Weight
14
45
40 tion, 8 solid tires plus intermediate rings, straight boom 23'11", angled stick 18'1" and grab
12
model GM 65 / 0.78 yd3 semi-closed tines.
11
35
10
Weight 63,300 lb
30 9
8
25
7 Dimensions
20 6
5
15
4 LH30
10'9"
10'4"
10 3
2 LH30
5
1
US_H0734
0 0 22"
35'3"
-1
-5
-2
-10 -3
-4
-15
-5
-20 -6
-7
ft m 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m
45 40 35 30 25 20 15 10 5 0 ft
Stabilizers raised 15,0* 15,0*
45 4 pt. outriggers down 15,0* 15,0*
14'11"
24' 5"
30' 2"
34' 4"
Stabilizers raised 13,1 16,8* 9,0 11,9 6,5 8,7 4,8 6,6 4,1 5,7
25 4 pt. outriggers down 16,8* 16,8* 14,5* 14,5* 12,7* 12,7* 9,9 11,2* 8,5* 8,5*
37' 4"
Stabilizers raised 12,5 16,6 8,7 11,5 6,3 8,5 4,7 6,5 3,6 5,1
20 4 pt. outriggers down 17,6* 17,6* 14,9* 14,9* 12,7 12,8* 9,8 11,2* 8,0 8,3*
39' 5"
Stabilizers raised 18,0* 18,0* 18,2 24,1* 11,6 15,6 8,1 11,0 6,0 8,2 4,6 6,3 3,5 5,0 3,3 4,8
15 4 pt. outriggers down 18,0* 18,0* 24,1* 24,1* 18,8* 18,8* 15,4* 15,4* 12,3 13,0* 9,6 11,1* 7,7 9,3* 7,5 8,3*
40'10"
Stabilizers raised 28,7 32,0* 15,8 22,2 10,5 14,3 7,5 10,3 5,6 7,8 4,3 6,1 3,4 4,9 3,1 4,5
10 4 pt. outriggers down 32,0* 32,0* 26,8* 26,8* 19,9* 19,9* 15,8 15,9* 11,9 13,2* 9,4 11,0* 7,6 9,0* 7,2 8,1*
41' 6"
Stabilizers raised 3,9* 3,9* 13,6 19,7 9,3 13,1 6,9 9,6 5,2 7,4 4,1 5,8 3,3 4,7 3,1 4,5
41' 7"
0 4 pt. outriggers down 4,8* 4,8* 16,0* 16,0* 19,8* 19,8* 14,4 15,5* 11,1 12,4* 8,9 10,0* 7,3* 7,3* 6,5* 6,5*
41' 1"
– 5 4 pt. outriggers down 15,3* 15,3* 17,7* 17,7* 14,0* 14,0* 10,9 11,2* 8,6* 8,6* 5,9* 5,9*
39' 5"
34' 1"

16
50
H0735
Operating Weight
15
45
12
11 Weight 63,700 lb
35
10
30 9
25
8 Dimensions
7
20 6
5
15 LH30
4 10'10" 10'9"
10 3
2 LH30
5
1 US_H0736
22"
0 0
36'11"
-1
-5
-2
-10 -3
-4
-15
-5
-20 -6
-7
ft m 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m
45 40 35 30 25 20 15 10 5 0 ft
22' 7"
29' 7"
34' 7"
38' 2"
25 4 pt. outriggers down 16,2* 16,2* 13,9* 13,9* 12,2* 12,2* 10,0 10,7* 7,8 9,2* 7,5 7,6*
40'11"
42'10"
44' 1"
44' 8"
44'10"
0 4 pt. outriggers down 3,6* 3,6* 12,4* 12,4* 19,3* 19,3* 14,1 15,1* 10,8 12,2* 8,7 10,0* 7,2 8,0* 5,7* 5,7*
44' 5"
– 5 4 pt. outriggers down 5,8* 5,8* 12,1* 12,1* 17,4* 17,4* 13,6 13,9* 10,5 11,2* 8,5 9,0* 6,8* 6,8* 4,9* 4,9*
43' 1"
38' 8"

LH 30 M – Attachment GS10
14
45 H0739
Operating Weight
13
12
tion, 8 solid tires plus intermediate rings, straight boom 22'4", stick HD with tipping kine-
11 matics special 10'6", quick coupler SW48 and scrap shear Genesis GXT 335R.
35
10 Weight 75,500 lb
30 9 A heavy counterweight (13,400 lb) is required for this attachment configuration.
8 8'7" The stick cylinder must be limited to the measure of 8'7".
25
7
20 6
Dimensions
5
15
4
10 3 LH30
10'9"
2 LH30
5 7'10"
1
0 0 US_H0740
23'11"
-1
-5 33'8"
-2
11'6"
-10 -3
-4 4'5"
-15
-5
ft m 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m
40 35 30 25 20 15 10 5 0 ft
in Undercarriage ft in
Stabilizers raised
45 4 pt. outriggers down
Stabilizers raised 11,0* 11,0* 7,4 9,4*
23' 6"
Stabilizers raised 6,7 8,2* 3,4 6,0
29' 6"
33' 8"
36' 8"
Stabilizers raised 6,3 8,2* 3,1 5,5 0,9 2,9 – 1,4
38'11"
Stabilizers raised 9,2* 9,2* 5,5 8,6* 2,6 5,0 0,6 2,6 – 0,8 – 0,8
15 4 pt. outriggers down 9,2* 9,2* 8,6* 8,6* 6,5* 6,5* 4,8* 4,8* 3,2* 3,2* 3,1* 3,1*
40' 4"
Stabilizers raised 6,7* 6,7* 8,6 12,4* 4,5 7,6 1,9 4,3 0,2 2,2 – 0,6 – 0,4
10 4 pt. outriggers down 6,7* 6,7* 12,4* 12,4* 9,0* 9,0* 6,6* 6,6* 4,7* 4,7* 3,0* 3,0* 2,6* 2,6*
41'
Stabilizers raised 12,6 19,5* 6,6 10,9 3,3 6,4 1,2 3,6 – 1,7 – 0,4 – 0,1
41' 1"
Stabilizers raised – – 9,2 15,8 4,8 9,0 2,3 5,3 0,6 2,9 – 1,3 – 0,2 – 0,1
0 4 pt. outriggers down – – 19,5* 19,5* 12,9* 12,9* 8,9* 8,9* 6,1* 6,1* 3,9* 3,9* 1,7* 1,7* 1,4* 1,4*
40' 7"
Stabilizers raised 0,9* 0,9* 7,1 13,5* 3,6 7,6 1,5 4,4 0,1 2,4 – 1,0 – 0,1
– 5 4 pt. outriggers down 0,9* 0,9* 13,5* 13,5* 11,6* 11,6* 7,8* 7,8* 5,1* 5,1* 2,8* 2,8* 0,7* 0,7*
39' 5"
Stabilizers raised 3,6* 3,6* 6,2 12,6 2,9 6,9 1,0 3,9 – 2,1 – 0,9 – –
– 10 4 pt. outriggers down 3,6* 3,6* 13,2* 13,2* 9,0* 9,0* 5,9* 5,9* 3,4* 3,4* 1,1* 1,1* – –
37' 6"
Stabilizers raised 2,7 5,2* 0,9 2,9* – 0,8*
30'

LH 30 M – Attachment GSV13
15 H0741
Operating Weight
45 14
40 tion, 8 solid tires plus intermediate rings, straight boom 22'4", stick HD with tipping kine-
12
matics special 10'6", quick coupler SW48, stick extension 8'10" and grab model GM 65 /
11 0.78 yd3 semi-closed tines.
35
10
Weight 66,100 lb
30 9
A heavy counterweight (13,400 lb) is required for this attachment configuration.
8
25
7
20 6
5
Dimensions
15
4
10 3
2 LH30
LH30
10'9"
5
1 7'10"
0 0
-1 H0742
-5 23'11"
-2
33'8"
-10 -3
-4 9'10"
-15
-5 27.6"
2'9"
-20 -6
-7
ft m 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m
45 40 35 30 25 20 15 10 5 0 ft
16'11"
Stabilizers raised 13,8* 13,8* 9,3 9,8* 8,8 9,0*
25' 7"
Stabilizers raised 14,9* 14,9* 10,0 13,0* 6,7 9,1 6,0 7,6*
31' 2"
35' 2"
38' 1"
40' 2"
15 4 pt. outriggers down 16,2* 16,2* 13,4* 13,4* 11,3* 11,3* 9,5* 9,5* 7,8 7,8* 6,2* 6,2*
41' 6"
10 4 pt. outriggers down 15,0* 15,0* 22,9* 22,9* 17,3* 17,3* 13,8* 13,8* 11,4* 11,4* 9,4* 9,4* 7,5* 7,5* 6,3* 6,3*
42' 2"
42' 4"
41'10"
Stabilizers raised 8,3* 8,3* 12,2 18,6 8,1 12,2 5,8 8,8 4,4 6,6 3,3 5,2 2,6 4,2 2,6 4,0*
– 5 4 pt. outriggers down 8,3* 8,3* 21,3* 21,3* 16,6* 16,6* 12,7* 12,7* 9,8* 9,8* 7,4* 7,4* 4,4* 4,4* 4,0* 4,0*
40' 6"
Stabilizers raised 10,5* 10,5* 11,7 18,0* 7,7 11,7 5,5 8,4 4,2 6,4 3,3 5,1 3,1 4,6*
36' 2"
Stabilizers raised
– 15 4 pt. outriggers down

LH 30 M – Attachment GK12
16
50
H0737
Operating Weight
15
45
tion, 8 solid tires plus intermediate rings, straight boom 22'4", stick with tipping kinematics
13
16'5" and sorting grab SG 30B / 1.11 yd3 shells.
40 12
Weight 64,200 lb
11
35
10
30 9
8 Dimensions
25
7
20 6
5 LH30
15 10'9"
4 9'2"
10 3
2 LH30
US_H0738
5 18'10"
1
33'8"
0 0
-1
-5
-2
-10 -3
-4
-15
-5
-6
ft m 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m
45 40 35 30 25 20 15 10 5 0 ft
Stabilizers raised
45 4 pt. outriggers down
19' 4"
26' 4"
30'11"
34' 2"
36' 6"
Stabilizers raised 15,5* 15,5* 17,5 23,9* 11,0 15,0 7,6 10,4 5,4 7,6 4,0 5,7 3,3 4,9
38'
38' 8"
5 4 pt. outriggers down 27,8* 27,8* 20,2* 20,2* 14,6 15,6* 11,0 12,5* 8,7 9,9* 7,2* 7,2*
38'10"
0 4 pt. outriggers down 3,7* 3,7* 17,4* 17,4* 19,3* 19,3* 14,1 14,9* 10,8 11,7* 8,5 8,8* 6,1* 6,1*
38' 4"
35' 8"
28' 5"

LH 35 M – Attachment GK13
17
55 H0747
Operating Weight
16
50 15 The operating weight includes the basic machine with 4 point outriggers, hydr. cab eleva-
14 tion, 8 solid tires plus intermediate rings, straight boom 25'7", stick with tipping kinematics
45
16'5" and sorting grab SG 30B / 1.11 yd3 shells.
13
40 12 Weight 74,100 lb
11
35
10
30 9 Dimensions
8
25
7
20 6
LH35
5 10'11"
15 9'
4
10 3
2 LH35 US_H0748
5 22'4"
1 37'3"
0 0
-1
-5
-2
-10 -3
-4
-15
-5
-6
ft m 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m
50 45 40 35 30 25 20 15 10 5 0 ft
16'11"
Stabilizers raised 16,3 17,1* 10,9 13,0* 10,4 11,9*
25' 7"
Stabilizers raised 16,5* 16,5* 11,5 14,0* 8,1 10,5 7,5 9,7
31' 1"
Stabilizers raised 16,4* 16,4* 11,5 13,9* 8,3 10,7 6,0 7,9 6,0 7,9
30 4 pt. outriggers down 16,4* 16,4* 13,9* 13,9* 12,0* 12,0* 9,6* 9,6* 9,4* 9,4*
35' 1"
Stabilizers raised 16,3 16,8* 11,3 14,0* 8,2 10,6 6,1 8,0 5,1 6,8
38'
40'
Stabilizers raised 38,5* 38,5* 22,2 25,0* 14,4 18,7* 10,2 13,3 7,6 10,0 5,8 7,7 4,5 6,1 4,2 5,7
41' 4"
42'
42' 1"
Stabilizers raised 7,2* 7,2* 11,3 15,5 8,4 11,4 6,5 8,8 5,2 7,0 4,2 5,8 4,0 4,9*
41' 6"
Stabilizers raised 9,7* 9,7* 11,0 14,7* 8,1 11,1 6,3 8,6 5,1 6,9 4,4 5,0*
38'11"
Stabilizers raised 8,1 9,2* 6,3 7,2* 5,9 6,6*
– 10 4 pt. outriggers down 9,2* 9,2* 7,2* ,72* 6,6* 6,6*
31' 5"
Height Can be slewed through 36,0° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity

16
50 15
H0743
Operating Weight
45 14 The operating weight includes the basic machine with 4 point outriggers, hydr. cab eleva-
40 12 model GM 65 / 0.78 yd3 semi-closed tines.
35 11
Weight 73,000 lb
10
30 9
8
25
7 Dimensions
20 6
5
15
4
10 3 LH35
11'4" 10'11"
2 LH35
5
1
0 0
US_H0744
-1
-5 22'8"
-2 37'3"
-10 -3
-4
-15
-5
-20 -6
-7
ft m 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0m
45 40 35 30 25 20 15 10 5 0 ft
10' 1"
23'
Stabilizers raised 15,8* 15,8* 12,4 13,6* 8,9 9,3*
29'11"
Stabilizers raised 12,7 13,7* 9,3 11,7 6,9 8,4*
34'10"
38' 4"
Stabilizers raised 16,2* 16,2* 12,4 13,9* 9,2 11,6 7,0 8,9 5,4 7,0 5,1 6,7
41'
Stabilizers raised 16,9 17,1* 11,9 14,4* 8,9 11,3 6,9 8,8 5,4 7,0 4,7 6,1
42'11"
Stabilizers raised 15,4* 15,4* 22,3* 22,3* 15,8 18,3* 11,3 14,4 8,5 10,9 6,6 8,5 5,2 6,8 4,4 5,7
44' 1"
44'10"
44'10"
Stabilizers raised 3,7* 3,7* 12,3* 12,3* 12,2 16,4 9,2 12,1 7,2 9,5 5,8 7,7 4,8 6,3 4,1 5,5
44' 4"
Stabilizers raised 5,9* 5,9* 12,1* 12,1* 11,6 15,8 8,7 11,7 6,9 9,2 5,6 7,5 4,7 6,3 4,3 5,0*
42'11"
Stabilizers raised 13,8* 13,8* 11,4 14,3* 8,6 11,5 6,8 9,1 5,6 7,2* 5,0 5,7*
38' 5"
Stabilizers raised
– 15 4 pt. outriggers down

17
55
16
H0745
Operating Weight
50 15
The operating weight includes the basic machine with 4 point outriggers, hydr. cab eleva-
45 14
tion, 8 solid tires plus intermediate rings, straight boom 28'7", angled stick 21'4" and grab
13
12
35 11 Weight 73,900 lb
10
30 9
8
25
7 Dimensions
20 6
5
15
4
10 3 LH35
2 LH35
10'10" 10'11"
5
1
0 0
-1 US_H0746
-5 23'7"
-2
-10 -3 40'2"
-4
-15
-5
-20 -6
-7
-25
-8
ft m 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m
55 50 45 40 35 30 25 20 15 10 5 0 ft
23' 4"
Stabilizers raised 14,7* 14,7* 12,5 13,0* 8,9 9,8* 8,3 8,8*
31'
Stabilizers raised 12,9 13,1* 9,4 11,4* 6,9 8,8 6,3 7,8*
36' 5"
40' 6"
43' 7"
Stabilizers raised 15,9* 15,9* 12,4 13,4* 9,1 11,5* 6,9 8,8 5,3 6,9 4,1 5,4 3,9 5,2
45'11"
Stabilizers raised 16,7 16,8* 11,7 13,8* 8,7 11,1 6,6 8,6 5,2 6,8 4,0 5,4 3,5 4,8
47' 7"
Stabilizers raised 15,9* 15,9* 23,0* 23,0* 15,3 17,8* 10,8 14,0 8,1 10,5 6,3 8,2 4,9 6,5 3,9 5,3 3,3 4,5
15 4 pt. outriggers down 15,9* 15,9* 23,0* 23,0* 17,8* 17,8* 14,3* 14,3* 11,9* 11,9* 10,2* 10,2* 8,7* 8,7* 7,4* 7,4* 6,2* 6,2*
48' 8"
Stabilizers raised 20,2 25,5* 13,6 17,9 9,9 12,9 7,5 9,9 5,9 7,8 4,7 6,3 3,8 5,1 3,1 4,4
49' 4"
49' 4"
Stabilizers raised 1,7* 1,7* 7,2* 7,2* 10,9 15,1 8,2 11,2 6,4 8,7 5,2 7,1 4,2 5,8 3,5 4,9 3,1 4,3
0 4 pt. outriggers down 1,7* 1,7* 7,2* 7,2* 17,8* 17,8* 14,1* 14,1* 11,4* 11,4* 9,4* 9,4* 7,7* 7,7* 6,1* 6,1* 4,4* 4,4*
48'11"
Stabilizers raised 8,0* 8,0* 10,3 14,4 7,7 10,7 6,1 8,4 4,9 6,8 4,1 5,6 3,4 4,8 3,2 3,7*
47'11"
Stabilizers raised 9,6* 9,6* 10,0 13,0* 7,5 10,4 5,9 8,2 4,8 6,7 4,0 5,6 3,5 4,1*
44'
Stabilizers raised 7,4 8,3* 5,8 6,9* 4,8 5,4* 4,7 5,3*
35' 5"

LH 30 C LC – Attachment GK10
14
45 H0753
Operating Weight and Ground Pressure
13
40 The operating weight includes the basic machine with hydr. cab elevation, straight boom
12
19', stick with tipping kinematics 13'1" and sorting grab SG 30B / 1.11 yd3 tines.
11
35 Weight 65,300 lb
10 Pad width 24"
30 9 Ground pressure on request
8
25
7
20 6
Dimensions
5
15
4
LH30
10 3 10'3"
2 7'7"
LH30
5
1
US_H0754
0 0 18'6"
-1 30'10"
-5
-2
-10 -3
-4
-15
-5
ft m 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m
40 35 30 25 20 15 10 5 0 ft
35 LC 26,4* 26,4* 20,4* 20,4* 13' 4"
30 LC 23,3* 23,3* 16,1 18,3* 14,3 14,6* 21' 4"
25 LC 22,4* 22,4* 16,4 18,9* 11,3 16,2* 10,5 12,6* 26' 1"
20 LC 23,1* 23,1* 16,3 19,1* 11,4 16,2* 8,7 11,7* 29' 1"
15 LC 23,3* 23,3* 24,8 25,1* 15,8 19,9* 11,1 16,5* 8,3 12,9 7,8 11,3* 31' 1"
10 LC 42,6* 42,6* 23,3 27,9* 15,1 20,9* 10,8 16,7* 8,2 12,8 7,3 11,3* 32' 2"
5 LC 6,3* 6,3* 21,7 29,3* 14,3 21,3* 10,4 16,4* 8,0 12,5* 7,1 10,0* 32' 5"
0 LC 7,4* 7,4* 20,7 27,5* 13,8 20,2* 10,1 15,2* 7,9 10,8* 7,3 8,3* 31'11"
–5 LC 20,3 22,5* 13,5 17,1* 10,0 12,5* 8,5 9,3* 28' 5"
The lift capacities on the stick end without attachment are stated in lb x 1,000 and can be slewed through 360° on a firm, level supporting surface. Capacities are valid for 24" wide
triple grouser pads. Indicated loads based on the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. The lift capacity of the unit is limited by its stability,
the lifting capability of the hydraulic elements, or the maximum permissible lifting capacity of the load hook.

LH 30 C LC – Attachment GA10
12 H0751
11
10 19', angled stick 13'1" and grab model GM 65 / 0.78 yd3 semi-closed tines.
30 9 Weight 63,100 lb
Pad width 24"
8
25 Ground pressure on request
7
20 6
5
Dimensions
15
4
10 3
LH30
10'3"
2 LH30
7'10"
5
1
0 0 US_H0752
21'10"
-1 30'10"
-5
-2
-10 -3
-4
-15
-5
-6
ft m 11 10 9 8 7 6 5 4 3 2 1 0 m
35 30 25 20 15 10 5 0 ft
35 LC 23,1* 23,1* 19,7* 19,7* 12'
30 LC 22,6* 22,6* 15,8* 15,8* 14,4* 14,4* 20' 6"
25 LC 23,0* 23,0* 16,9 19,6* 11,8 14,1* 11,5 12,8* 25' 5"
20 LC 23,7* 23,7* 16,8 19,8* 11,9 16,9* 9,6 12,1* 28' 7"
15 LC 29,5* 29,5* 25,3 25,8* 16,3 20,6* 11,7 17,1* 8,8 13,4 8,6 11,9* 30' 7"
10 LC 43,3* 43,3* 23,8 28,6* 15,6 21,6* 11,4 17,4* 8,7 13,3 8,1 12,1* 31' 8"
5 LC 12,0* 12,0* 22,3 30,1* 14,9 22,0* 11,0 17,0 8,6 13,1 7,9 11,4* 31'11"
0 LC 11,3* 11,3* 21,3 28,3* 14,4 20,9* 10,7 16,0* 8,5 11,5* 8,0 9,9* 31' 4"
–5 LC 21,0 23,3* 14,2 17,8* 10,6 13,3* 9,1 10,0* 28' 5"

LH 30 C EW – Attachment GA12
14
45
H0757
13
12
22'4", angled stick 16'5" and grab model GM 65 / 0.78 yd3 semi-closed tines.
11
35 Weight 67,500 lb
10 Pad width 24"
30 9 Ground pressure on request
8
25
7
20 6
Dimensions
5
15
4
LH30
10 3 10'6"
7'10"
2 LH30
5
1
US_H0758
0 0 21'2"
-1 33'8"
-5
-2
-10 -3
-4
-15
-5
-6
ft m 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m
40 35 30 25 20 15 10 5 0 ft
45 EW
40 EW 17,3* 17,3* 14,3* 14,3* 17' 5"
35 EW 17,2* 17,2* 11,5* 11,5* 11,4* 11,4* 25' 1"
30 EW 17,4* 17,4* 15,2* 15,2* 10,2* 10,2* 30'
25 EW 17,5* 17,5* 15,1* 15,1* 13,3* 13,3* 9,6* 9,6* 33' 5"
20 EW 21,7* 21,7* 18,1* 18,1* 15,4* 15,4* 13,4* 13,4* 11,0 11,4* 9,3* 9,3* 35'10"
15 EW 20,9* 20,9* 24,5* 24,5* 19,3* 19,3* 15,9* 15,9* 13,5* 13,5* 10,9 11,4* 9,3* 9,3* 37' 5"
10 EW 42,1* 42,1* 27,3* 27,3* 20,5* 20,5* 16,4* 16,4* 13,5 13,6* 10,7 11,2* 9,4 9,4* 38' 2"
5 EW 5,7* 5,7* 28,7* 28,7* 21,0* 21,0* 16,5* 16,5* 13,2 13,3* 10,5 10,7* 8,6* 8,6* 38' 5"
0 EW 6,2* 6,2* 21,7* 21,7* 20,3* 20,3* 15,8* 15,8* 12,6* 12,6* 9,7* 9,7* 7,5* 7,5* 37'11"
– 5 EW 19,8* 19,8* 18,1* 18,1* 14,2* 14,2* 11,0* 11,0* 7,8* 7,8* 7,0* 7,0* 36'
– 10 EW 14,3* 14,3* 11,3* 11,3* 8,7* 8,7* 29' 5"

LH 30 C EW – Attachment GA14
16
50
H0759
15
45
25'7", angled stick 19'8" and grab model GM 65 / 0.78 yd3 semi-closed tines.
13
40 12 Weight 68,300 lb
Pad width 24"
11
10
30 9
8
25
7
Dimensions
20 6
5
15 LH30
4 10'2" 10'6"
10 3
2 LH30
5
1 US_H0760
21'10"
0 0 36'11"
-1
-5
-2
-10 -3
-4
-15
-5
-20 -6
-7
-25
-8
ft m 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m
45 40 35 30 25 20 15 10 5 0 ft
45 EW 13,3* 13,3* 11,4* 11,4* 21'10"
40 EW 15,7* 15,7* 13,3* 13,3* 9,4* 9,4* 29' 2"
35 EW 15,9* 15,9* 13,8* 13,8* 12,2* 12,2* 8,5* 8,5* 34' 2"
30 EW 13,7* 13,7* 12,1* 12,1* 10,7* 10,7* 7,9* 7,9* 37'11"
25 EW 16,2* 16,2* 13,9* 13,9* 12,1* 12,1* 10,7* 10,7* 8,8 8,9* 7,6* 7,6* 40' 8"
20 EW 17,0* 17,0* 14,3* 14,3* 12,3* 12,3* 10,8* 10,8* 8,8 9,3* 7,5* 7,5* 42' 8"
15 EW 21,0* 21,0* 18,2* 18,2* 14,9* 14,9* 12,6* 12,6* 10,8 10,8* 8,7 9,2* 7,4 7,5* 44'
10 EW 40,4* 40,4* 26,0* 26,0* 19,3* 19,3* 15,4* 15,4* 12,8* 12,8* 10,5 10,8* 8,5 9,1* 7,1 7,2* 44' 8"
5 EW 2,8* 2,8* 25,4* 25,4* 19,9* 19,9* 15,6* 15,6* 12,7 12,7* 10,1 10,6* 8,3 8,7* 6,5* 6,5* 44'10"
0 EW 3,4* 3,4* 12,6* 12,6* 19,4* 19,4* 15,2* 15,2* 12,3 12,3* 9,9 10,0* 8,0* 8,0* 5,8* 5,8* 44' 5"
– 5 EW 5,6* 5,6* 12,0* 12,0* 17,6* 17,6* 14,0* 14,0* 11,3* 11,3* 9,1* 9,1* 6,9* 6,9* 4,9* 4,9* 43' 4"
– 10 EW 13,5* 13,5* 14,7* 14,7* 12,0* 12,0* 9,7* 9,7* 7,5* 7,5* 5,5* 5,5* 39' 2"

LH 30 C EW – Attachment GK12
16
50
H0761
15
45
22'4", stick with tipping kinematics 16'5" and sorting grab SG 30B / 1.11 yd3 tines.
13
40 12 Weight 69,800 lb
Pad width 24"
11
10
30 9
8
25 Dimensions
7
20 6
5
15
4 LH30
9'8" 10'6"
10 3
2 LH30
5
1
US_H0762
0 0 19'
-1 33'8"
-5
-2
-10 -3
-4
-15
-5
-6
ft m 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m
45 40 35 30 25 20 15 10 5 0 ft
40 EW 18,9* 18,9* 14,4* 14,4* 18' 6"
35 EW 17,3* 17,3* 13,0* 13,0* 11,2* 11,2* 25'10"
30 EW 16,7* 16,7* 14,5* 14,5* 11,4* 11,4* 9,9* 9,9* 30' 7"
25 EW 16,8* 16,8* 14,5* 14,5* 12,6* 12,6* 9,2* 9,2* 34'
20 EW 19,5* 19,5* 17,5* 17,5* 14,7* 14,7* 12,7* 12,7* 10,4 10,8* 8,8* 8,8* 36' 4"
15 EW 15,2* 15,2* 23,2* 23,2* 18,6* 18,6* 15,2* 15,2* 12,8* 12,8* 10,3 10,7* 8,6* 8,6* 37'11"
10 EW 41,3* 41,3* 26,6* 26,6* 19,7* 19,7* 15,7* 15,7* 12,8* 12,8* 10,2 10,5* 8,3* 8,3* 38' 8"
5 EW 27,9* 27,9* 20,2* 20,2* 15,7* 15,7* 12,6* 12,6* 10,0* 10,0* 7,3* 7,3* 38'10"
0 EW 3,4* 3,4* 17,8* 17,8* 19,5* 19,5* 15,1* 15,1* 11,8* 11,8* 9,0* 9,0* 6,2* 6,2* 38' 5"
– 5 EW 17,1* 17,1* 17,3* 17,3* 13,4* 13,4* 10,3* 10,3* 7,1* 7,1* 6,2* 6,2* 36'
– 10 EW 13,5* 13,5* 10,5* 10,5* 7,9* 7,9* 29' 5"

Working Tools
Shells for Loose Material Shells for loose material with cutting edge (without teeth)
Grab model GM 20C
Width of shells ft in 3'11" 4'11" 5'9" 6'7" 7'5" 8'2"
Capacityyd3 1.57 1.96 2.29 2.62 2.94 3.27
Weightlb 3,295 3,570 3,805 4,025 4,265 4,495
H1063
Multi-Tine Grab open semi-closed closed
Grab model GM 64 (4 tines)
Capacityyd3 0.52 0.78 0.52 0.78 0.52 0.78
Weightlb 1,765 2,005 2,070 2,335 2,425 2,790
Grab model GM 65 (5 tines)
Capacityyd3 0.52 0.78 0.52 0.78 0.52 0.78
Weightlb 2,590 2,890 2,975 3,285 3,010 3,540
Wood Grab
H0832
Grab model GM 20B round-shaped (complete overlapping, vertical cylinders)

Sizeyd2 1.20 1.55 1.79 2.03 2.27
Cutting width ft in 2'8" 2'8" 2'8" 2'8" 2'8"
Height of grab, closed ft in 8'5" 8'9" 8'11" 9'3" 9'6"
Weightlb 3,405 3,470 3,515 3,585 3,880
H1121
Sorting Grab ribbed perforated ribbed perforated ribbed perforated
Grab model SG 30B
Width of shells ft in 3'3" 3'3" 3'11" 3'11" 4'7" 4'7"
Capacityyd3 0.98 1.11 1.18 1.31 1.37 1.50
Max. closing force lbf 17,985 17,985 17,985 17,985 17,985 17,985
Weight incl. adapter plate SWA lb 3,890 3,715 4,135 3,880 4,365 4,045
Load Hook with Suspension

Max. load lb 27,560
Height with suspension ft in 3'1"
Weightlb 300
Magnet Devices / Lifting Magnets

GeneratorkW 13 / 17 13 / 17
Electromagnets with suspension
PowerkW 8,8 10
Diameter of magnet ft in 4'1" 4'5"
Weightlb 2,890 3,750

Equipment
30 M
35 M
30 M
35 M
30 C
30 C
Undercarriage Hydraulic System
4-wheel steering + Electronic pump regulation • • •
Trailer coupling + + Liebherr hydraulic oil from – 4 °F to + 104 °F • • •
Track pads, variants + Liebherr hydraulic oil, biologically degradable + + +
Individual control outriggers + + Magnetic rod in hydraulic tank • • •
Shuttle axle lock, automatic • • Bypass filter + + +
Outrigger monitoring system + + Preheating hydraulic oil + + +
Dozer blade + +
Tires, variants + +
Protection for piston rods, outriggers + +
30 M
35 M
Undercarriage, variants +
30 C
Two lockable storage boxes • • Engine
Fuel anti-theft device + + +
Air pre-filter with dust discharge + + +
Preheating fuel + + +
30 M
35 M
Preheating coolant ** + + +
30 C
Uppercarriage Preheating engine oil ** + + +
Uppercarriage right side light, 1 piece, LED + + +
Uppercarriage rear light, 2 pieces, LED + + +
Refuelling system with filling pump + + +
30 M
35 M
Railing on uppercarriage + + +
30 C
Generator + + + Cooling System
Main battery switch for electrical system • • • Radiator, large-mesh, for dust-intensive operation • • •
Warning beacon on uppercarriage, LED + + + Reversible fan drive, fully automatic + + +
Protection for headlights + + + Protective grid in front of cooler intake • • •
Protection for rear lights + + +
Tool equipment, extended + + +

30 M
35 M
30 M
35 M
30 C
30 C
Operator’s Cab Attachment
Stabilizer, proportional control on left joystick • • Boom lights, 2 pieces, halogen • • •
Cab lights rear, halogen + + + Boom lights, 2 pieces, LED + + +
Cab lights rear, LED + + + Stick lights, 2 pieces, halogen • • •
Cab lights front, halogen + + + Stick lights, 2 pieces, LED + + +
Cab lights front, halogen (under rain cover) • • • Filter system for working tool + + +
Cab lights front, LED + + + Height limitation and stick shutoff, electronically + + +
Cab lights front, LED (under rain cover) + + + Boom cylinder cushioning + + +
Left arm console, folding • • • Stick camera (with separate monitor), bottom side, with protection + + +
Armrest adjustable • • • Load torque limitation + + +
Slewing gear brake, rocker switch in the right joystick + + + Liebherr multi coupling system + + +
Operator’s seat Comfort • • • Liebherr quick coupler, hydraulic + + +
Operator’s seat Premium + + + Pipe fracture safety valves hoist cylinders • • •
Driving alarm Pipe fracture safety valve stick cylinder • • •
(acoustic signal is emitted during travel, can be switched ON / OFF) + + + Quick coupling system LIKUFIX + + +
Fire extinguisher + + + Quick coupling system MH40 + + +
Horn, button on left joystick • • • Protection for piston rods, hoist cylinder + + +
Joystick steering (max. 7.5 mph) • • Overload warning device + + +
Joystick and wheel steering (slim version) + +
Cab elevation, hydraulic (LHC) • • •
Cab elevation, rigid (LFC) + + +
30 M
35 M
Automatic air conditioning • • •
30 C
Wheel steering (slim version) + + Complete Machine
LiDAT Plus (extended Liebherr data transfer system) * • • • Lubrication
Automatic engine shut-down (time adjustable) + + + Lubrication undercarriage, manually – decentralized (grease points) • • •
Proportional control • • • Central lubrication system for uppercarriage and attachment,
Radio Comfort, control via display with handsfree set + + + automatically • • •
Preparation for radio installation • • • Central lubrication system for undercarriage, automatically + + +
Warning beacon on cab, LED + + + Central lubrication system, extension for tool attachment + + +
Windows made from impact-resistant laminated safety glass + + + Special coating, variants + + +
Windscreen wiper, roof + + + Überwachung
Windshield wiper, entire windscreen • • • Rear view monitoring with camera ** • • •
Top guard + + + Side view monitoring with camera ** • • •
Front guard, adjustable + + +
Sun visor + + +
Flashing light (xenon) + + +
• = Standard, + = Option
* = optionally extendable after one year, ** = country-dependent
Options and / or special attachments, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr in order to
retain warranty.

The Liebherr Group of Companies
Wide Product Range State-of-the-art Technology

The Liebherr Group is one of the largest construction equipment To provide consistent, top quality products, Liebherr attaches
manufacturers in the world. Liebherr’s high-value products and great importance to each product area, its components and
services enjoy a high reputation in many other fields. The wide core technologies. Important modules and components are
range includes domestic appliances, aerospace and trans- developed and manufactured in-house, for instance the entire
portation systems, machine tools and maritime cranes. drive and control technology for construction equipment and
mining trucks.
Exceptional Customer Benefit
Every product line provides a complete range of models in many Worldwide and Independent
different versions. With both their technical excellence and Hans Liebherr founded the Liebherr family company in 1949.
acknowledged quality, Liebherr products offer a maximum of Since that time, the enterprise has steadily grown to a group of
customer benefits in practical applications. more than 130 companies with over 41,000 employees located
on all continents. The corporate headquarters of the Group is
All illustrations and data may differ from standard equipment. Subject to change without notice.
Liebherr-International AG in Bulle, Switzerland. The Liebherr
family is the sole owner of the company.
www.liebherr.us
Printed in Germany by Schirmer RG-BK LHB/VF 11828906-0.5-05.16_enUS
Liebherr Construction Equipment Co.

4100 Chestnut Avenue, Newport News, VA 23607, USA
S +1 (757) 245 5251, Fax +1 (757) 928 8701
www.liebherr.us, E-Mail: [email protected]
www.facebook.com/LiebherrConstruction

Liebherr LH35M Material Handler Brochure

Uploaded by

Copyright:

Available Formats

Liebherr LH35M Material Handler Brochure

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Liebherr LH35M Material Handler Brochure

Uploaded by

Copyright:

Available Formats

Material Handling Machines

* Without working tool

2 LH 30 Industry Litronic LH 35 Industry Litronic

LH 30 Industry Litronic LH 35 Industry Litronic 3

Power plus speed –

4 LH 30 Industry Litronic LH 35 Industry Litronic

Increased Engine Output Intelligent Electronics

High Swing Torque Sensitive Hydraulics

Liebherr Diesel Engine Closed

LH 30 Industry Litronic LH 35 Industry Litronic 5

6 LH 30 Industry Litronic LH 35 Industry Litronic

Low Engine Speeds Working Tools and Quick Coupling Systems

Engine speed [rpm]

Perfect operating point with LPE Output

Low Fuel Consumption Thanks Liebherr-

LH 30 Industry Litronic LH 35 Industry Litronic 7

Durability and sustainability –

8 LH 30 Industry Litronic LH 35 Industry Litronic

Pipe Fracture Safety Valves Quality and Competence

QPDM – Quality and

LH 30 Industry Litronic LH 35 Industry Litronic 9

10 LH 30 Industry Litronic LH 35 Industry Litronic

Ergonomic Design Proportional Control

Low Noise Levels Colour Touchscreen Display and Operation Unit

Safe Operator’s Seat Comfort Joystick

LH 30 Industry Litronic LH 35 Industry Litronic 11

12 LH 30 Industry Litronic LH 35 Industry Litronic

Service-based Machine Design Remanufacturing

Lubrication Excellent Rapid Spare

LH 30 Industry Litronic LH 35 Industry Litronic 13

14 LH 30 Industry Litronic LH 35 Industry Litronic

LH 30 Industry Litronic LH 35 Industry Litronic 15

Shells for loose material

Wood grab Stick with tipping kinematics

Stick for scrap shear

Magnet devices Flat angled stick

Working tools Sticks Booms

16 LH 30 Industry Litronic LH 35 Industry Litronic

Hydraulic cab elevation Rigid cab elevation

LH 30 Industry Litronic LH 35 Industry Litronic 17

First tower crane TK10

First hydraulic cab elevation

Production plant in Kirchdorf 1983

R 353 with the first industrial Breakthrough with the A 911

Silenced material handling machine

18 LH 30 Industry Litronic LH 35 Industry Litronic

Opening of the assembly building Launch of the lightweight stick

2007 2011 Launch of the new LH series

Awarded the IF Award for the

LH 30 Industry Litronic LH 35 Industry Litronic 19

Diesel Engine Hydraulic System

Hydraulic Controls Swing Drive

20 LH 30 Industry Litronic LH 35 Industry Litronic

LH 30 Industry Litronic LH 35 Industry Litronic21

LH 30 M – Choice of Cab Elevation

Increase type LFC 120 Increase type LHC 255

22 LH 30 Industry Litronic LH 35 Industry Litronic

LH 35 M – Choice of Cab Elevation

LH 30 Industry Litronic LH 35 Industry Litronic21

Increase type LFC 120 Increase type LHC 255

Increase type LFC 120 Increase type LHC 255

LH 30 Industry Litronic LH 35 Industry Litronic23

Increase type LFC 120 Increase type LHC 255

Increase type LFC 120 Increase type LHC 255

LH 30 Industry Litronic LH 35 Industry Litronic25

LH 30 Industry Litronic LH 35 Industry Litronic27

LH 30 Industry Litronic LH 35 Industry Litronic29

LH 30 Industry Litronic LH 35 Industry Litronic31

LH 30 Industry Litronic LH 35 Industry Litronic33

LH 30 Industry Litronic LH 35 Industry Litronic35

LH 30 Industry Litronic LH 35 Industry Litronic37

LH 30 Industry Litronic LH 35 Industry Litronic39

LH 30 Industry Litronic LH 35 Industry Litronic41

LH 30 Industry Litronic LH 35 Industry Litronic43