MA0510-EA

Operation Guide HS-30W

ILLUSTRATION USING THE STOPWATCH
A signal confirms A and C button operations.
TIME DISPLAY STOPWATCH DISPLAY
Working range
Pressed down for a few The total elapsed time and split time display is limited to 9 hours 59 minutes 59.99 seconds. Lap time display is
seconds to change between limited to 59 minutes 59.99 seconds.
12/24-hour formats. Thereafter it will be reset and started again. The lap counter starts from 1 to 99 and repeats from 0.

Lap counter NORMAL TIME

Month Year Split time

Press . START STOP RESET
Day of Lap time
Day
the week CHART 0 (a)
a
Seconds
PM
Hour
Total BUTTON
Hour Minutes elapsed time OPERATION
Seconds
1/100th of a second
Minutes DISPLAY
• A sticker is affixed to the glass of this stopwatch when you purchase it. Be sure to remove the sticker before using
the stopwatch.
• Depending on the stopwatch model, the configuration of your stopwatch may differ somewhat from that shown in
the illustration. NET TIME

GENERAL GUIDE START STOP START STOP RESET

Every time the B button is pressed, the display is switched between TIME and STOPWATCH displays. CHART 0 (a) (a) (a + b)
a b
STOPWATCH DISPLAY (Loss time)
A button ..... Starts and stops timing.
B button ..... Toggles between the current time and stopwatch screens.
C button ..... Registers a lap/split time. BUTTON
R button ..... Recalls lap/split time records and total elapsed time. OPERATION

SPLIT TIME AND LAP TIME 1ST SPLIT

2ND SPLIT DISPLAY
Split time (SPLIT) is the time 3RD SPLIT
elapsed from the start to a
specific point.
START
After stopping a net time operation by pressing A, you can resume it by pressing A again.
Lap time (LAP) is the time 1ST LAP
elapsed from one point to another 2ND LAP LAP/SPLIT TIMES
or for one lap around a track. 3RD LAP A maximum of 9 lap/split time records and total elapsed time are automatically stored into the memory, and
recalled by pressing the R button.
START Once 9 lap/split time records are stored (counter shows a flashing value greater than 9), pressing C displays the
current lap/split time, but does not store it in memory.

START STOP RESET

1ST LAP 2ND LAP 3RD LAP
0 (a) (a + b) (a + b + c) (t)
a b c
CHART
1ST SPLIT (a)
2ND SPLIT (a+b)
3RD SPLIT (a+b+c)

BUTTON
OPERATION

DISPLAY

1
 Operation Guide HS-30W
Recording the Finishing Times of Multiple Runners
After pressing A to start timing, press C as each runner crosses the finish line. This records each of the finishing
times in memory, which you can recall by pressing the R button.
*Recorded times are retained in memory until you start a new net time operation (by pressing A) after clearing
the stopwatch screen to all zeros (by pressing C).
Example : To record the times of 10 different runners.

START 1ST RUNNER 2ND RUNNER 9TH RUNNER 10TH RUNNER

FINISHES FINISHES FINISHES FINISHES

CHART

BUTTON
OPERATION

You can scroll through time records in memory by pressing , even while the stopwatch is
still running.
Runner’s record

DISPLAY Press .

Runner’s finishing position Difference between this runner’s record

and the previous runner’s record

SETTING TIME AND DATE

1) Press C for a few seconds in TIME display to set time and date.
2) Press A on a time signal to correct seconds.
3) Press C shift flashing digit (s). Digit(s) to be changed will flash.

SECONDS HOUR MINUTES YEAR

DAY OF THE WEEK DAY MONTH

4) Each press of A increments digit. Keep pressed to move quickly.

5) Press B or C to complete setting.
*Year digits can be set up to the year 2029.

AUTO-retrieve function
Display automatically returns to TIME if left unused for a few minutes.