Lista Precios AVEVA CITEC
Lista Precios AVEVA CITEC
Lista Precios AVEVA CITEC
Citect SCADA is an operating and monitoring software solution from AVEVA. With its powerful visualisation capabilities and operational fe
faster, enabling operators to respond quickly to process disturbances and thereby increase their effectiveness.
Citect SCADA's Integrated Development Environment is provided at no cost, and requires no license purchase.
Notes
*1 The additional key/s (CT109921) must include a Citect SCADA Box (CT109923 or CT109925) on the same order.
There are a maximum of 20 keys in a single box. Order Citect SCADA box (CT109925) for multiples of 20 keys.
The additional keys will be shipped in the Citect SCADA box packaging.
*2 The 10 pack USB keys (CT109920) includes 10 x Citect SCADA Box with USB key (CT109923).
The USB keys are NOT programmed and are packed separately.
This part number is available for AVEVA Distributor stock replenishment, not for End Users.
Software Keys
• The software keys will be sent as Activation IDs electronically via email.
• Each individual software license (one software key can contain multiple quantities of the same license type) results in a separate Activ
can only be individual license types -> you cannot have 2 different license types linked on the one software key Activation ID.
• A software key is required for each different license type (i.e. server, client, API, driver, etc), but can contain multiple quantities of the s
For example, 1 Citect SCADA server containing 4 concurrent client seats (see next bullet) will require two software keys; one for the serv
• The preferred method of licensing multiple concurrent clients is to program a single software key with multiple concurrent seats.
• If concurrent clients are to be programmed individually (i.e. as individual Activation IDs vs a single Activation ID containing multiple sea
for each individual client -> please note; this can result in a large number of Activation IDs.
• With each version upgrade, a new set of Activation IDs will be issued, and need to be activated.
• Only a single SCADA version can exist on a Floating License Manager instance.
Key Pack must be purchased with any Distributor Demo License key purchase or reference existing key number in stock (CT109921).
x
Description
A Citect SCADA system can support more than two server licenses through the use of clustering. Clustering brings the data from multiple
system servers still operate in redundant pairs. A single machine can host multiple servers. The sizing of the server licenses should be ba
complete machine (and not per server). For redundant systems simply purchase a quantity of 2, no other options are required.
The relevant Citect SCADA Key Pack (CT109921, CT109923, CT109924) should be purchased separately.
A Server license includes functionality equivalent to a Control Client on the server machine.
Description
Citect SCADA Control Clients are recommended for operators. These clients are licensed by the number of points that are controlled and
licenses reside on the Server key) or a static license (separate key on the client). A floating Control Client license must have the same poi
license.
For a redundant system the number of “floating” clients ordered will be added to the Primary Server key, for the Standby Server order the
(CT102088).
The relevant Citect SCADA Key Pack (CT109921, CT109923, CT109924) should be purchased separately with each static client.
From Citect SCADA v7.30 (released Dec 2012) the Control and Web Control Clients have been combined to a single Control Client licens
will enable the Web Control Client from Citect SCADA v7.30. The Web Control Client has been superseded by the Control Client from Cite
the Citect SCADA software (such as v7.20 and earlier), a Web Control Client license may still be required.
Description
Citect SCADA View-only Clients are available for users that do not need to perform any control. These clients can use either a floating lice
Server key) or a static license (separate key on the client).
For a redundant system the number of “floating” clients ordered will be added to the Primary Server key, for the Standby Server order the
(CT103088).
The View-only Client is point count independent and can be used with full server license of all point counts.
The relevant Citect SCADA Key Pack (CT109921, CT109923, CT109924) should be purchased separately with each static client.
From Citect SCADA v7.30 (released Dec 2012) the View-only and Web View-only Clients have been combined to a single View-only Clien
(CT1030xx) will enable the Web View-only Client from Citect SCADA v7.30. The Web View-only Client has been superseded by the View-
for older versions of the Citect SCADA software (such as v7.20 and earlier), a Web View-only Client license may still be required.
Description
These part numbers must be used for expanding the number of points on the Server.
The point count license upgrade is achieved in steps. For example, if a license is upgraded from 75pt to 1500pt, 3 part numbers will be ord
150pt to 500pt and 500pt to 1500pt.
Additional Support is required if current license is under support. If key expires prior to 12 months from purchase date, support must be p
Description
These part numbers must be used if you are expanding the number of points on the Server that contains the hardware key (for floating clie
a hardware key (for static client licenses). Expansion across multiple point counts is achieved by ordering a combination of part numbers.
from 75pt to 1500pt, 3 part numbers will be ordered to upgrade from 75pt to 150pt, 150pt to 500pt and 500pt to 1500pt.
Description
These part numbers must be used if you are expanding the number of points on the View-Only Legacy Point Counts to upgrade to Unlimi
Description
All Citect SCADA Server licenses (CT1011xx) come with 10 connectivity licenses that can be used with either OPC DA Server or CtAPI co
be used to expand the Citect SCADA connectivity licenses beyond the included 10.
Description
With Citect Anywhere, get the true value and power of Citect SCADA in any compliant web browser – any device, anytime, anywhere!. Ad
troubleshoot equipment, or access key process information while you are in the office, at home, or on the road, at any time.
Description
Product Drivers enables additional functionality to be added to the Citect SCADA licenses. The Citect SCADA offer includes a very large n
of intellectual property and associated rights, some drivers have a special reference and must be ordered separately.
Driver Packs:
* The Facilities Driver Pack includes BACnet and KNX drivers.
* The PowerConnect Driver Pack includes IEC61850 and PowerModbus drivers.
Drivers can only be added to a Citect SCADA Server or Citect HMI license. Additional driver/s and support must be purchased for redund
The purchase of Specialty Drivers does not include technical support. Technical support for Specialty Drivers needs to be purchased sepa
Time limited versions of these drivers are shipped with the Citect SCADA product DVD; or available for download from the Connectivity H
website. The customer is required to purchase a license to remove the time limitation from the driver.
Description
IEC870IP Driver
PSDirect ETH Driver
PSDirect MPI Driver
S7TCP Driver
Facilities Driver Pack
PowerConnect Driver Pack
Citect HMI licenses are restricted versions of the Citect SCADA Server licenses, aimed at standalone HMI applications that require no red
third party software.
The relevant Citect SCADA Key Pack (CT109921, CT109923, CT109924) should be purchased separately. The CtAPI (CT104288) or OP
added to the Citect HMI key.
Description
Description
These part numbers must be used for expanding the number of points on the Citect HMI license. The point count license upgrade is achie
upgraded from 100pt to 600pt, 3 part numbers will be ordered to upgrade from 100pt to 150pt, 150pt to 300pt and 300pt to 600pt.
Description
The Web Control Client has been superseded by the Control Client from Citect SCADA v7.30 onwards. A standard control client
Client from Citect SCADA v7.30. For older versions of the Citect SCADA software (such as v7.20 and earlier) a Web Control Clien
Citect SCADA Web Control Clients are available for users that need full control but prefer the flexibility of access through Internet Explore
number of points that are controlled and must use floating licenses (i.e. the licenses reside on the Server key). A Web Control Client licens
the corresponding Server license.
For a redundant system the number of clients ordered will be added to the Primary Server key, for the Standby Server order the same num
(CT102288). The point count follows the primary server license.
Description
These part numbers must be used if you are expanding the number of points on the Server that contains the hardware key (for floating we
multiple point counts is achieved by ordering a combination of part numbers. For example, if a license is upgraded from 75pt to 1500pt, 3
from 75pt to 150pt, 150pt to 500pt and 500pt to 1500pt.
Description
The Web View-Only Client has been superseded by the View-Only Client from Citect SCADA v7.30 onwards. A standard view-onl
View-Only Client from Citect SCADA v7.30. For older versions of the Citect SCADA software (such as v7.20 or earlier) a Web Vie
required.
Citect SCADA Web View-Only Clients are available for users that need full control but prefer the flexibility of access through Internet Explo
number of points that are controlled and must use floating licenses (i.e. the licenses reside on the Server key). A Web View-Only Client lic
as the corresponding Server license.
For a redundant system the number of clients ordered will be added to the Primary Server key, for the Standby Server order the same num
(CT103288). The point count follows the primary server license.
Description
A License Transfer Fee is applied under a number of situations, primarily when a USB key is reprogrammed due to a license transfer, or w
equivalent software key(s). It is not required when a new license is added or an existing license point count is expanded.
The License Transfer Fee now also applies for transfer between USB to Parallel and vice versa.
All examples and scenarios below apply to License Transfer (CT109401, CT109404).
Example scenarios:
1. 2 existing keys relocated to 1 new key = 1 license transfer fee and 1 key pack.
2. 1 existing key relocated to 2 new keys = 1 license transfer fee and 2 key packs.
3. 1 existing USB key containing 1 Server and 4 concurrent Client seats relocated to software keys = 1 license transfer fee and 2 software
Note: When transferring from USB keys to software keys; a License Transfer Reprogramming fee is required for each USB key to be trad
each different license type to be transferred per USB key. For more information on Software Keys, please refer to the Citect SCADA Prod
Price Book.
Removal or downgrade (license type or point count) of licenses on a USB key will require a key swap where a new key is issued and the e
or downgrade of a license does not provide any refund or credit.
When moving a license to an existing USB key that already contains license(s), the license being moved must be the same point count as
Note: When placing an order please indicate the USB key serial numbers and details in the special instructions.
Note: This provides only a new authorization code, if a new USB key is required then you also need to purchase a new hardware key (CT
Description
License Transfer Fee
License Transfer Fee, 10x Bulk Transfer
• Cost per Lost/Stolen License: License Transfer Fee (CT109401) and Key Pack (CT1099xx)
• Submittal of letter of “AVEVA License Lost/Stolen Acknowledgement” on End User’s company letterhead required before shipping replac
• Email letter to [email protected] with reference to Order Number.
This policy aims to facilitate effective management of Citect SCADA Distributor Demo keys provided to Distributors for their demonstration
Integrators and other customers.
The policy is to provide our distributors with keys to allow effective demonstration of Citect SCADA at trade-shows, expos, conferences, a
scenarios. The pricing is for a twelve month duration. The fee is to cover administration and handling costs.
SCOPE
• This policy applies for Citect SCADA demo keys to be used by Distributors of Citect SCADA for product demonstration purposes.
• This policy is NOT applicable to Citect SCADA Loan keys.
Also required is a Citect SCADA Box with USB key (CT109923) or Citect SCADA Software key (CT109924).
Description
Distributor Demo SCADA/Historian License Key
This option is available to End Users that require Citect SCADA licenses for their own Testing/Simulation needs for an off-line developmen
be used for production systems except in the event of emergency.
Customers must have an active Customer FIRST agreement to be eligible to participate in this program. In addition, a new End User Test
required to be completed at time of registration.
These licenses are provided with a 8-day run time and a 12 month duration, and will expire unless renewed after the 12 months.
2x License keys (choice between USB or Software Keys) are programmed as follows, and includes access to Customer FIRST Standard
Also required is a Citect SCADA Box with USB key (CT109923) or Citect SCADA Software key (CT109924).
Description
End User Test/Simulation Program
End User Test/Simulation Program - Renewal
This policy aims to facilitate effective management of Citect SCADA loan keys used in systems testing for end users and distributors.
The policy is to provide loan keys to customers that need temporary access. The pricing is for a three month duration. Effective managem
tracking procedures to prevent keys from getting lost or never returned. The fee is to cover administration, handling costs as well as sales
SCOPE
• This policy applies for Citect SCADA loan keys to be used in end user, AVEVA SCADA Partner and Sales partner systems for testing.
• This policy is NOT applicable to AVEVA SCADA Partner keys that are provided under their AVEVA SCADA Partner agreement.
• This policy is NOT applicable to Sales partner keys that are provided under their sales partner agreement.
• This policy does NOT apply for end users who download Citect SCADA for free from the web, with a license run time of 15 minutes, in o
purchase.
• For any request of loan keys other than those stipulated in this policy, prior approval needs to be obtained from your AVEVA Regional S
Product Manager.
A new key pack is required and must be purchased for Loan Keys.
Notes:
1. Loan key part number, quantity, start date and duration by month are required.
2. Loan keys can be extended simply by placing an order quoting the key number and duration for extension. In this case there is no “one
please use the part numbers above for the required duration.
3. The expiry date of the loan key is set to be 15 days + the 3 months to allow for delivery times.
4. Should loan keys not be returned within 7 days of the due date, AVEVA reserves the right to charge at current list price of the equivalen
5. A USB or Software license pack (CT109923, CT109924) must be purchased with the initial loan key.
Description
Citect SCADA Loan Key, Single (3 Months)
Citect SCADA Loan Key, Multiple (3 Months)
As we continue to align our Customer FIRST Offers across all brands, Citect SCADA Version Upgrade is available via purchase of the bel
Version upgrade @ 50% of license price is the pathway for customer to upgrade to latest product version if customer site is out of support
all licenses on a given key will be applied version upgrade.
For out of support customers wishing to get back in support, Version Upgrade needs to be used for all keys to bring the entire site to curre
Description
Citect SCADA Out of Support Version Upgrade
Customer FIRST Program for Citect SCADA
The Customer FIRST Program for Citect SCADA – (“CF”) is a fee-based software maintenance and technical support program from AVEV
support and additional services for the users of Citect SCADA. Customer FIRST is sold on an annual basis (unless specified otherwise on
annum is calculated as a percentage of the sum of the list price values of the licenses included in the support contract.
To enroll and purchase the Customer FIRST, a customer must possess (not necessarily be running) the most current version of Citect SC
customer is running a previous version of Citect SCADA software, they must first purchase an upgrade to the current version. Citect SCA
to purchase version upgrades.
Description
Description
Customer FIRST - Citect SCADA - Implementation Consultant - Travel & Living
Customer FIRST - Citect SCADA - Implementation Consultant - Billable
Customer FIRST - Citect SCADA - Implementation Consultant - Billable Renew
Customer FIRST - Citect SCADA - Add Contacts to Support
n capabilities and operational features, it delivers actionable insight
ness.
se purchase.
ame order.
20 keys.
y.
of points that are controlled and can use either a floating license (i.e. the
license must have the same point count as the corresponding Server
ents can use either a floating license (i.e. the licenses reside on the
s.
ther OPC DA Server or CtAPI connections. The part numbers below can
rds. A standard control client license will enable the Web Control
nd earlier) a Web Control Client license may still be required.
red for each USB key to be traded in, and a Software Key is required for
refer to the Citect SCADA Product Hardware section at the top of this
re a new key is issued and the existing key must be returned. Removal
ctions.
rchase a new hardware key (CT1099xx).
demonstration purposes.
109924).
109924).
Part # Category Price (USD)
CT109520 SE-C $2,086
CT109521 SE-C $2,086
ed from your AVEVA Regional Sales Lead and the Citect SCADA
on. In this case there is no “one month free”. To extend the loan key
if customer site is out of support. The upgrade works at a key level, i.e.
Price (USD) (%
Part # Category
of License List
CF-CIT-10-7000 SE-S 15%
CF-CIT-10-7000R SE-S 15%
CF-CIT-10-7001 SE-S 17%
CF-CIT-10-7001R SE-S 17%
CF-CIT-10-7002 SE-S 20%
CF-CIT-10-7002R SE-S 20%
CF-CIT-10-7003 SE-S 23%
CF-CIT-10-7003R SE-S 23%
Refer to
Customer First
CF-CIT-10-7090 SE-S
Program Guide/
FAQ documents