RFO MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS FOR AUDIO

GREEN For
Miniature Capacitors for Audio CAP audio

●
A standard capacitor utilizing a newly developed material for a high grade of audio
reproduction.
●
Copper clad steel wire is used for leads.
●
New type miniaturized capacitor for audio, New type
using synthetic mica paper for the separator.
RFO RA2

Specifications
Item Performance
Category temperature range (℃) ー40 to ＋85
Tolerance at rated capacitance (%) ±20 (20℃,120Hz)
Leakage current (µA) Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (µF) ; V : Rated voltage (V) (20℃)

Rated voltage (V) 6.3 10 16 25 35 50 63 100

Tangent of loss angle
tanδ (max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08
(tanδ)
0.02 is added to every 1000µF increase over 1000µF (20℃,120Hz)

Test time 1000 hours

Endurance (85℃) Leakage current The initial specified value or less
(Applied ripple current) Percentage of capacitance change Within ±20% of initial value
Tangent of the loss angle 150% or less of the initial specified value

Shelf life (85℃) Test time : 1000 hours. Other have same as endurance. Voltage application treatment
Applicable standards JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985)

Outline Drawing Unit : mm Coefficient of Frequency for Rated Ripple Current

Frequency(Hz)
Rated voltage(V) 50・60 120 1k 10k 100k
Sleeve φd±0.05 copper clad steel wire (tinned) CV(µFxWV)
Vent (except φ5)
6.3 to 16 All CV value 0.80 1 1.1 1.2 1.2
≦1000 0.80 1 1.5 1.7 1.7
φD＋0.5max.

25 to 35
1000＜ 0.80 1 1.2 1.3 1.3
F±0.5

≦1000 0.80 1 1.6 1.9 1.9

50 to 100
1000＜ 0.80 1 1.2 1.3 1.3

5
L＋α max. 15min. min.
Part numbering system (example : 25V100µF)
φD 5 6.3 8 10 12.5 16 18 RFO ̶ 25 V 101 M F3 #
F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
Rated voltage Rated capacitance Capacitance Casing Additional
φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 Series code symbol symbol tolerance symbol symbol symbol

2.0
α 1.5
(φ10,16L or less : 1.5)

Case symbol
Case Casing Case Casing Case Casing Case Casing
φD×L (mm) Symbol φD×L (mm) Symbol φD×L (mm) Symbol φD×L (mm) Symbol
5×11 E3 10×12.5 H3 12.5×20 Ⅰ5 16×31.5 J7
6.3×11 F3 10×16 H4 12.5×25 Ⅰ6 16×35.5 J8
8×11.5 G3 10×20 H5 16×25 J6 18×35.5 K8
18×40 K9

Standard Ratings
Rated voltage (V) 6.3 10 16 25 35 50 63 100
Rated ripple Rated ripple Rated ripple Rated ripple Rated ripple Rated ripple Rated ripple Rated ripple
Rated Item Case current Case current Case current Case current Case current Case current Case current Case current
Aluminum Electrolytic Capacitors

capacitance (µF) φD×L (mm) mArms φD×L (mm) mArms φD×L (mm) mArms φD×L (mm) mArms φD×L (mm) mArms φD×L (mm) mArms φD×L (mm) mArms φD×L (mm) mArms
0.47 ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ 5×11 10 ̶ ̶ 5×11 10
1 ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ 5×11 15 ̶ ̶ 5×11 15
2.2 ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ 5×11 20 ̶ ̶ 5×11 25
for Audio

3.3 ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ 5×11 25 ̶ ̶ 5×11 30

4.7 ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ 5×11 30 5×11 30 5×11 35 5×11 35
10 ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ 5×11 45 5×11 45 5×11 50 6.3×11 60
22 ̶ ̶ ̶ ̶ 5×11 50 5×11 55 5×11 60 5×11 70 6.3×11 85 8×11.5 110
33 ̶ ̶ 5×11 55 5×11 60 5×11 70 5×11 80 6.3×11 100 6.3×11 100 10×12.5 160
47 ̶ ̶ 5×11 65 5×11 75 5×11 85 6.3×11 110 6.3×11 120 8×11.5 150 10×16 210
100 5×11 85 5×11 95 6.3×11 120 6.3×11 140 8×11.5 190 8×11.5 210 10×12.5 260 12.5×20 380
220 6.3×11 150 6.3×11 165 8×11.5 220 8×11.5 250 10×12.5 330 10×16 400 10×20 460 16×25 720
330 6.3×11 180 8×11.5 240 8×11.5 270 10×12.5 370 10×16 450 10×20 540 12.5×20 650 16×25 880
470 8×11.5 260 8×11.5 280 10×12.5 390 10×16 480 10×20 590 12.5×20 740 12.5×25 850 16×31.5 1150
1000 10×12.5 450 10×16 540 10×20 680 12.5×20 880 12.5×25 1050 16×25 1350 16×31.5 1550 ̶ ̶
2200 12.5×20 890 12.5×20 970 12.5×25 1200 16×25 1550 16×31.5 1750 16×35.5 2100 ̶ ̶ ̶ ̶
3300 12.5×20 1050 12.5×25 1250 16×25 1600 16×31.5 1950 18×35.5 2250 ̶ ̶ ̶ ̶ ̶ ̶
4700 16×25 1550 16×25 1650 16×31.5 2050 18×35.5 2500 ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶
6800 16×25 1750 16×31.5 2050 18×35.5 2550 ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶
10000 16×31.5 2150 18×35.5 2550 ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶
15000 18×35.5 2700 ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶

(Note) Rated ripple current : 85℃, 120Hz

NOTE
Design, Specifications are subject to change without notice.
CAT.No.2010/2011E Ask factory for technical specifications before purchase and/or use.