Gesellschaft fr Schweitechnik International mbH

Application for an assignation of the Certification of the Constructor's Qualification for Welding of Structural Steelwork according to DIN 18800-7:2008-11 incl. Workshop Description
to the manufacturer certification body GSI mbH, Dsseldorf represented by the GSI-SLV _____________________________

Company: Street, No.: Phone No.: Fax: VAT identification no. Managing Director: Further enquiry to: The application is made for the following workshop: Street, No.: Postcode, town/city: Postcode, town/city, state: E-Mail 1: E-Mail 2: http:// Technical Director:

Range of Application
(please mark)

Class reinforcing steel acc. DIN 4099 E (DIN EN ISO 17660-1)

No multiple choice!

additional

First certification

Re-certification

GSI Quality Seal 'Certified Welding Company' required

1)

- current certificate expires (date): - Certificate previously established by: due to changes of following preconditions: Desired audit date: Enclosures: - Workshop Description (to be added) - Organisation Chart (to be added)
The company agrees in the registration of the company address and range of application.
1) GSI Quality Seal 'Certified Welding Company' The successful certification authorises the company to use the mark 30 2008 079 679 (Deutsches Patent- und Markenamt / German Patent and Trademark Office) 'Certified Welding Company GSI SLV' for advertising purposes without paying any utilisation fee. The company will receive the mark together with the certificate. The permission of utilisation is exclusively reserved to the successfully certified company and must not be transferred to third parties. The direct labelling of products is not allowed, as it is not a product certification. The utilisation is solely permitted as long as the related certification is valid.

place, date

stamp, signature

Page 1 of 8

Gesellschaft fr Schweitechnik International mbH

Applicant's details

reserved for auditor

1. Range of Application 1.1 Scope of weldings

1.1.1 Applicable standards and rules: DIN 4112 - Temporary structures, fair-ground amusements (static) DIN 4112 - Temporary structures, fair-ground amusements (dynamic) DIN 4119 - Above ground cylindrical flat bottom tanks constructed of metallic material DIN 4131 - Steel radio towers and masts (static) DIN 4131 - Steel radio towers and masts (dynamic) DIN 4132 - Crane runways, steel structures DIN 4133 - Steel stacks (static) DIN 4133 - Steel stacks (dynamic) DIN 4420 - Service and working scaffolds DIN 4421 - False work (e.g. for bridges) DIN 15018 - Cranes DIN 18801 - Steel construction in buildings DIN 18808 - Steel structures consisting of hollow sections (predominantly static load) DIN 18809 - Steel road- and foot-bridges DIN 19704 - Hydraulic steel structures DIN 22261 - Excavators, spreaders and auxiliary equipment in opencast lignite mines DIN 24117 - Distributing masts RIL 804 - Railway bridges Other structural steelworks (please describe under item 1.1.2) 1.1.2 Description:

Page 2 of 8

Gesellschaft fr Schweitechnik International mbH

Applicant's details

reserved for auditor

1.2 Welding processes (process no. acc. to EN ISO 4063) 111 (E) 114 (MF) 135 (t-MAG) 141 (TIG) 135 (v-MAG) 121 (UP)

136 (MAG-tabular cored) other:

1.3 Base material (min./max. thickness) (e.g. EN 10025-S235JRG2, thickness 4-20 mm) S 235 other: S 275 S 355 S 460 S 690 S 960 CrNi-Steel

1.4 Welding consumables and welding auxiliary material (Please indicate acc. to which standard and/or trade name (e.g. DIN EN ISO 2560 - A - E 36 4 B)

1.5 Specialities Mass production: Description: Yes No

Page 3 of 8

Gesellschaft fr Schweitechnik International mbH

Applicant's details

reserved for auditor

2. Personnel 2.1 Number of personnel in the work shop: 2.2 Number of personnel in the weld-shop and on site: 2.3 Welding technology personnel: 2.3.1 Responsible welding coordinator
permanently employed by the company
2) 3)

Name, first name: Date of birth: Field of responsibility: 2.3.1.1 Vocational training Shop Foreman since: Technician, Date of Exam: 2.3.1.2 Welding-related training
3) 4)

Master, Date of Exam: Engineer, Date of Exam:

Welding practioner EWP, Date of Exam: Welding Specialist EWS, Date of Exam: Welding Technician EWT, Date of Exam: Welding Engineer EWE, Date of Exam: 2.3.1.3 Other welding expertise acc. to DIN EN ISO 14731 4) (not applicable with training acc. to 2.3.1.2) comprehensive specific
2) 3)

basic

2.3.2 Deputy welding coordinator Name, first name: Date of birth: Field of responsibility:

permanently employed by the company

2.3.2.1 Vocational training in welding Shop Foreman since: Technician, Date of Exam:
2) 3)

4)

Master, Date of Exam: Engineer, Date of Exam:

In case of further persons, please indicate details on an informal separate sheet Please enclose as annex the professional career in tabular form 4) Please add copies of certificates 5) Add copies of test certificates or table of welders with valid qualification

Page 4 of 8

Gesellschaft fr Schweitechnik International mbH

Applicant's details

reserved for auditor

2.3.2.2 Welding related training

3)

Welding practioner EWP, Date of Exam: Welding Specialist EWS, Date of Exam: Welding Technician EWT, Date of Exam: Welding Engineer EWE, Date of Exam: 2.3.2.3 Other welding know-how acc. to DIN EN ISO 14731 4) ( not applicable with training acc. to 2.3.2.2) comprehensive 2.3.3 number of welders 2.3.3.1 qualified workshop welders 2.3.3.2 qualified workshop welders
5)

specific

basic

: :

5)

3. Equipment ( Supply details on additional sheets if necessary) 3.1 Size of fabrication workshop(s): total approx. (in m) 3.2 Size of welding workshop(s): total approx. (in m) 3.3 Welding machines Number: Type of welding machines(s): max. current intensity: 3.4 Type and place of storage for filler metals and auxiliary material

3.5 Baking facility for filler metals

Page 5 of 8

Gesellschaft fr Schweitechnik International mbH

Applicant's details

reserved for auditor

3.6 Type and place of storage for base metals

3.7 Machines for weld preparation

3.8 Lifting equipment number:

lifting capacity (kg):

3.9 Tacking-/welding jigs

3.10 Equipment for preheating and post-weld heat treatment

3.11 Equipment for non-destructive, mechanical and metallographic testing 3.11.1 In-house:

3.11.2 External, with the companies / institutes:

Page 6 of 8

Gesellschaft fr Schweitechnik International mbH

Applicant's details

reserved for auditor

4. Quality Assurance 4.1 Own workshop production control - responsible person (name, first name): - Type of marking of prefabricated products: 4.2 Quality requirements acc. to DIN EN ISO 3834 ff. 4.2.1 Questions (Quality requirements acc. to DIN EN ISO 3834 ff.) 4.2.1.1 Are there internal provisions as to the performance and responsibility of the contract and construction review with regard to the welding requirements?

4.2.1.2 Are subcontractors for welding tasks selected and checked acc. to the requirements of DIN EN ISO 3834, can this be traced? Yes No

4.2.1.3 Please tell the names of the persons for quality examinations. Are there examiners resp. co-workers assigned to specified examination tasks regarding welding technique? Yes No

4.2.1.4 Is the equipment regularly checked as to function, accuracy and job safety requirements? Yes No

Page 7 of 8

Gesellschaft fr Schweitechnik International mbH

Applicant's details

reserved for auditor

4.2.1.5 Is the work in line with welding procedure specifications (WPS) and welding plans? If yes, please list up the WPS: Yes No

4.2.1.6 Are there internal stipulations as to quality checks before, during and after the welding? Yes No

4.2.1.7 Are the welders regularly instructed on the specific basics of the quality criteria in the welding techniques? Yes No internal external

4.2.1.8 Which actions are taken upon quality deviations?

4.2.1.9 Marking and traceability: is the marking of components and sub-assemblies, ensured acc. to the specifications. Is this the case in all phases of the cutting to size, the preassembly and the final assembly? Yes No

4.2.1.10 Are quality records maintained? If yes, how is their evaluation and storage? Yes No

Page 8 of 8