0% found this document useful (0 votes)
116 views31 pages

Online Aptitude Test Management System Project Report

The purpose of on-line aptitude test system is to take online test in an efficient manner and no time wasting for checking the paper. The main objective of on-line aptitude test system is to efficiently evaluate the candidate thoroughly through a fully automated system that not only saves lot of time but also gives fast results. For students they give papers according to their convenience and time and there is no need of using extra thing like paper, pen etc.

Uploaded by

Kamal Acharya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
116 views31 pages

Online Aptitude Test Management System Project Report

The purpose of on-line aptitude test system is to take online test in an efficient manner and no time wasting for checking the paper. The main objective of on-line aptitude test system is to efficiently evaluate the candidate thoroughly through a fully automated system that not only saves lot of time but also gives fast results. For students they give papers according to their convenience and time and there is no need of using extra thing like paper, pen etc.

Uploaded by

Kamal Acharya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 31

AN

INTERNSHIP REPORT
ON
ONLINE APTITUDE TEST MANAGEMENT
SYSTEM
PROJECT
BY
KAMAL ACHARYA
(Tribhuvan University)
Date: 2024/02/25

1|P ag e
ONLINE APTITUDE TEST SYSTEM

Abstract
The purpose of on-line aptitude test system is to take online test in an efficient manner
and no time wasting for checking the paper. The main objective of on-line aptitude test system is
to efficiently evaluate the candidate thoroughly through a fully automated system that not only
saves lot of time but also gives fast results. For students they give papers according to their
convenience and time and there is no need of using extra thing like paper, pen etc. This can be
used in educational institutions as well as in corporate world. Can be used anywhere any time as
it is a web based application (user Location doesn’t matter). No restriction that examiner has to
be present when the candidate takes the test.
Every time when lecturers/professors need to conduct examinations they have to sit down
think about the questions and then create a whole new set of questions for each and every exam.
In some cases the professor may want to give an open book online exam that is the student can
take the exam any time anywhere, but the student might have to answer the questions in a limited
time period. The professor may want to change the sequence of questions for every student. The
problem that a student has is whenever a date for the exam is declared the student has to take it
and there is no way he can take it at some other time. This project will create an interface for the
examiner to create and store questions in a repository. It will also create an interface for the
student to take examinations at his convenience and the questions and/or exams may be timed.
Thereby creating an application which can be used by examiners and examinee’s simultaneously.
Examination System is very useful for Teachers/Professors. As in the teaching
profession, you are responsible for writing question papers. In the conventional method, you
write the question paper on paper, keep question papers separate from answers and all this
information you have to keep in a locker to avoid unauthorized access. Using the Examination
System you can create a question paper and everything will be written to a single exam file in
encrypted format. You can set the General and Administrator password to avoid unauthorized
access to your question paper. Every time you start the examination, the program shuffles all the
questions and selects them randomly from the database, which reduces the chances of
memorizing the questions.

2|P ag e
EXISTING SYSTEM:

The whole process of assigning test and evaluating their scores after the test, was done
manually till date. Processing the test paper i.e. checking and distributing respective scores used
to take time when the software was not installed.

DISADVANTAGES OF CURRENT SYSTEM:

 The current system is very time consuming.


 It is very difficult to analyze the exam manually.
 To take exam of more candidates more invigilators are required but no need of invigilator
in case of on line exam.
 Results are not precise as calculation and evaluations are done manually.
 The chances of paper leakage are more in current system as compared to proposed
system. Result processing takes more time as it is done manually

PROPOSED SYSTEM:

 The online test created for taking online test has following features
 In comparison to the present system the proposed system will be less time consuming and
is more efficient.
 Analysis will be very easy in proposed system as it is automated
 Result will be very precise and accurate and will be declared in very short span of time
because calculation and evaluations are done by the simulator itself.
 The proposed system is very secure as no chances of leakage of question paper as it is
dependent on the administrator only.
 The logs of appeared candidates and their marks are stored and can be backup for future
use

3|P ag e
Modules

Admin

Login Form:

Here administrator has to login by using their unique username and password.
Administrator is the only authorized person to access this module for security purpose. So other
users don’t get rights to access this module.

Update Test Results:


In this module admin update the student test results by getting the answers which has
been given by the student while taking the online test. Admin will compare the answer given by
the user with correct answer that has been stored in the database. Admin has the authority to
decide when the result should be updated.

User
Student Registration:

Student has to register their personal details like rollno, department, year, class, section,
semester, email and phone number, .This registration will used to avoid anonymous users. After
registration process is completed students can take their online aptitude test. If Student doesn’t
have account to login, he has to first register.

View Results:
After completing their online aptitude test, student can view their results if the admin
update the result, or else Student will receive the intimation from the administrator, after getting
the intimation from the administrator, student can login to the system and view their results.

4|P ag e
Staff Registration:

Staff has to register their details like staff id, department, email and phone number, .This
registration will used to avoid anonymous users. After registration process is completed staff can
evaluate student aptitude test. If staff doesn’t have account to login, he has to first register.

Update Question:
In this module staff will update different aptitude question with answers. He can update
aptitude questions in different areas like analytical reasoning, logical thinking, quantitative
aptitude questions etc. These questions are updated in their respective sections of database.
Update Test Results:
In this module admin update the student test results by getting the answers which has
been given by the student while taking the online test. Admin will compare the answer given by
the user with correct answer that has been stored in the database. Admin has the authority to
decide when the result should be updated.

SOFTWARE ENVIRONMENT

PHP

PHP stands for Hypertext Preprocessor. PHP scripts run inside Apache server or Microsoft IIS.
PHP and Apache server are free. PHP code is very easy. PHP is the most used server side
scripting language. PHP files contain PHP scripts and HTML. PHP files have the extension
“php”, “php3”, “php4”, or “phtml”.

Using PHP
 Generate dynamic web pages. PHP can display different content to different user or
display different content at different times of the day.
 Process the contents of HTML forms. We can use a PHP to retrieve and respond to the
data entered into an HTML form.

5|P ag e
 Can create database-driven web pages. A PHP can insert new data or retrieve existing
data from a database such a MySQL.

Working of PHP
PHP is a standard HTML file that is extended with additional features. Like a standard HTML
file, PHP contains HTML tag that can be interpreted and displayed by a web browser. Anything
we could normally place in an HTML file Java applets, Blinking text, server side scripts .we can
place in PHP. However, PHP has three important features that make it unique.

 PHP contains server side scripts.


 PHP provides several built-in objects.

6|P ag e
HYPER TEXT MARKUP LANGUAGE (HTML)

HTML is an application of the Standard Generalized Markup Language (SGML), which was
approved as an international standard in the year 1986. SGML provides a way to encode hyper
documents so they can be interchanged.

SGML is also a Meta language for formally describing document markup system. Infact HTML
uses SGML to define a language that describes a WWW hyper document’s structure and inter
connectivity.

Following the rigors of SGML, TBL bore HTML to the world in 1990. Since then, many of us
have it to be easy to use but sometimes quite limiting. These limiting factors are being addressed
but the World Wide Web Consortium (aka W3c) at MIT. But HTML had to start somewhere,
and its success argues that it didn’t start out too badly.

Database:

A database is simply a collection of used data just like phone book. MySQL database include
such objects as tables, queries, forms, and more.

Tables:

In MySQL tables are collection of similar data. With all tables can be organized differently, and
contain mostly different information- but they should all be in the same database file. For
instance we may have a database file called video store. Containing tables named members,
tapes, reservations and so on. These tables are stored in the same database file because they are
often used together to create reports to help to fill out on screen forms.

7|P ag e
Relational database:

MySQL is a relational database. Relational databases tools like access can help us manage
information in three important ways.

 Reduce redundancy
 Facilitate the sharing of information
 Keep data accurate.

Fields

Fields are places in a table where we store individual chunks of information.

Primary key and other indexed fields:

MySQL use key fields and indexing to help speed many database operations. We can tell
MySQL, which should be key fields, or MySQL can assign them automatically.

Controls and objects:

Queries are access objects us display, print and use our data. They can be things like field labels
that we drag around when designing reports. Or they can be pictures, or titles for reports, or
boxes containing the results of calculations.

Queries and dynasts:


Queries are request to information. When access responds with its list of data, that response
constitutes a dynaset. A dynamic set of data meeting our query criteria. Because of the way
access is designed, dynasts are updated even after we have made our query.

8|P ag e
Forms:

Forms are on screen arrangement that make it easy to enter and read data. we can also print the
forms if we want to. We can design form our self, or let the access auto form feature.

Reports:

Reports are paper copies of dynaset. We can also print reports to disk, if we like. Access helps us
to create the reports. There are even wizards for complex printouts.

Properties:

Properties are the specification we assigned to parts of our database design. We can define
properties for fields, forms, controls and most other access objects.

9|P ag e
DESIGN AND DEVELOPMENT PROCESS

FUNDAMENTAL DESIGN CONCEPTS

System design is a “how to” approach to creation of a new system. System design goes through
2 phases. They are

- Logical design

- Physical design

Logical design reviews the present physical system, prepares input and output specifications,
makes edit security and control specifications

Physical design maps out the details of the physical system, plans, system implementation,
device a test and implementation plan.

10 | P a g e
DESIGN PROCESS

INPUT DESIGN

Input design is the process of converting the user-oriented. Input to a computer based format.
The goal of the input design is to make the data entry easier , logical and free error. Errors in the
input data are controlled by the input design. The quality of the input determines the quality of
the system output.

All the data entry screen are interactive in nature, so that the user can directly enter into data
according to the prompted messages. The user are also can directly enter into data according to
the prompted messages. The users are also provided with option of selecting an appropriate input
from a list of values. This will reduce the number of error, which are otherwise likely to arise if
they were to be entered by the user itself.

Input design is one of the most important phase of the system design. Input design is the process
where the input received in the system are planned and designed, so as to get necessary
information from the user, eliminating the information that is not required. The aim of the input
design is to ensure the maximum possible levels of accuracy and also ensures that the input is
accessible that understood by the user. The input design is the part of overall system design,
which requires very careful attention. If the data going into the system is incorrect then the
processing and output will magnify the errors.

The objectives considered during input design are:

 Nature of input processing.


 Flexibility and thoroughness of validation rules.
 Handling of properties within the input documents.
 Screen design to ensure accuracy and efficiency of the input relationship
with files.
 Careful design of the input also involves attention to error handling,
controls, batching and validation procedures.

11 | P a g e
Input design features can ensure the reliability of the system and produce result from accurate
data or they can result in the production of erroneous information.

Data Flow Diagram (DFD)

The first step is to draw a data flow diagram (DFD). The DFD was first developed by Larry
Constantine as a way of expressing system requirements in graphical form.

A DFD also known as a “bubble chart” has the purpose of clarifying system requirements and
identifying major transformations that will become programs in system design. So, it is the
starting point of the design phase that functionally decomposes the requirements specifications
down to the lowest level of detail. A DFD consists of series of bubbles join by the data flows in
the system.

The purpose of data flow diagrams is to provide a semantic bridge between users and systems
developers. The diagrams are:

• Graphical, eliminating thousands of words;

• Logical representations, modeling WHAT a system does, rather than physical models
showing HOW it does it;

• Hierarchical, showing systems at any level of detail; and

• jargon less, allowing user understanding and reviewing.

The goal of data flow diagramming is to have a commonly understood model of a system.
The diagrams are the basis of structured systems analysis. Data flow diagrams are supported by
other techniques of structured systems analysis such as data structure diagrams, data dictionaries,
and procedure-representing techniques such as decision tables, decision trees, and structured
English.

12 | P a g e
External Entity

An external entity is a source or destination of a data flow, which is outside the area of study.
Only those entities, which originate or receive data, are represented on a business process
diagram. The symbol used is an oval containing a meaningful and unique identifier.

Process

A process shows a transformation or manipulation of data flows within the system. The symbol
used is a rectangular box, which contains 3 descriptive elements: Firstly an identification number
appears in the upper left hand corner. This is allocated arbitrarily at the top level and serves as a
unique reference. Secondly, a location appears to the right of the identifier and describes where
in the system the process takes place.

Data Flow

A data flow shows the flow of information from its source to its destination. A data flow is
represented by a line, with arrowheads showing the direction of flow. Information always flows
to or from a process and may be written, verbal or electronic. Each data flow may be referenced
by the processes or data stores at its head and tail, or by a description of its contents.

Data Store

A data store is a holding place for information within the system: It is represented by an open
ended narrow rectangle. Data stores may be long-term files such as sales ledgers, or may be
short-term accumulations: for example batches of documents that are waiting to be processed.
Each data store should be given a reference followed by an arbitrary number.

Resource Flow

A resource flow shows the flow of any physical material from its source to its destination. For
this reason they are sometimes referred to as physical flows. The physical material in question
should be given a meaningful name. Resource flows are usually restricted to early, high-level
diagrams and are used when a description of the physical flow of materials is considered to be
important to help the analysis.

13 | P a g e
OUTPUT DESIGN

The output form of the system is either by screen or by hard copies. Output design aims at
communicating the results of the processing of the users. The reports are generated to suit the
needs of the users .The reports have to be generated with appropriate levels. In our project
outputs are generated by asp as html pages. As its web application output is designed in a very
user-friendly this will be through screen most of the time.

CODE DESIGN

The main purpose of code design is to simplify the coding and to achieve better performance and
quality with free of errors. The coding is prepared in such a way that the internal procedures are
more meaningful validation manager is displayed for each column. The coding of the variables is
done in such a way that one other than person who developed the packages can understand its
purpose.

To reduce the server load, the project is designed in a way that most of the Validation of fields is
done as client side validation, which will be more effective.

DATABASE DESIGN

The database design involves creation of tables that are represented in physical database as
stored files. They have their own existence. Each table constitute of rows and columns where
each row can be viewed as record that consists of related information and column can be viewed
as field of data of same type. The table is also designed with some position can have a null value.

The database design of project is designed in such a way values are kept without redundancy and
with normalized format.

14 | P a g e
DEVELOPMENT APPROACH

TOP DOWN APPROACH

The importance of new system is that it is user friendly and a better interface with user’s working
on it. It can overcome the problems of manual system and the security problem.

Top down approach of software development is the incremental approach to the construction of
program structure. Modules are integrated by moving through the control hierarchy, beginning
with the main control module. Module subordinate to the main control modules is incorporate
into the structure in either a depth first or breadth first manner.

The top down approach is performed in a serious of five steps

1. The main module that is overall software is divided into five modules that
are under the control of the main control module.
2. Depending on the top down approach selected subordinate stubs is
replaced one at a time with actual components.
3. Tests are conducted as each component is integrated
4. On completion of each test another stub is replaced with real time
component.
5. Regression testing may be conducted to ensure the new errors have not
been introduced.

TESTING AND IMPLEMENTATION


SYSTEM TESTING

It is the process of exercising software with the intent of finding and ultimately correcting
errors. This fundamental philosophy does not change for web applications, because web based
system and applications reside on network and inter-operate with many different operating
systems, browsers, hardware platforms and communication protocols. Thus searching for errors
is significant challenge for web applications.

15 | P a g e
Testing issues:

1. Client GUI should be considered.


2. Target environment and platform considerations
3. Distributed database considerations
4. Distributed processing consideration

TESTING AND METHODLOGIES

System testing is the state of implementation, which is aimed at ensuring that the system works
accurately and efficiently as expect before live operation, commences. It certifies that the whole
set of programs hang together System testing requires a test plan that consists of several key
activities and steps for run program, string, system and user acceptance testing. The
implementation of newly design package is important in adopting a successful new system

Testing is important stage in software development. System test is implementation should be a


confirmation that all is correct and an opportunity to show the users that the system works as
they expected It accounts the largest percentage of technical effort in software development
process.

Testing phase is the development phase that validates the code against the functional
specifications. Testing is a vital to the achievement of the system goals. The objective of testing
is to discover errors. To fulfill this objective a series of test step such as the unit test, integration
test, validation and system test where planned and executed.

Unit testing

Here each program is tested individually so any error apply unit is debugged. The sample data
are given for the unit testing. The unit test results are recorded for further references. During unit
testing the functions of the program unit validation and the limitations are tested.

16 | P a g e
Unit testing is testing changes made in a existing or new program this test is carried out during
the programming and each module is found to be working satisfactorily. For example in the
registration form after entering all the fields we click the submit button. When submit button is
clicked, all the data in form are validated. Only after validation entries will be added to the
database.

Unit testing comprises the set of tests performed by an individual prior to integration of the unit
into large system. The situation is illustrated in as follows

Coding-> Debugging ->Unit testing -> Integration testing

The four categories of test that a programmer will typically perform on a program unit

1. Functional test
2. Performance test
3. Stress Test
4. Structure test
Functional test involve exercising the code with nominal input values for which the
expected results are known as well as boundary values and special values.

Performance testing determines the amount of execution time spent in various parts of unit
program through put and response time and device utilization by the program.

A variation of stress testing called sensitivity testing in same situations a very small range
of data contained in a bound of valid data may cause extreme and even erroneous processing or
profound performance degradation.

Structured testing is concerned with a exercising the internal logic of a program and
traversing paths. Functional testing, stress testing performance testing are referred as “black box”
testing and structure testing is referred as “white box” testing

17 | P a g e
VALIDATION TESTING

Software validation is achieved through a serious of testes that demonstrate conformity with
requirements. Thus the proposed system under consideration has been tested by validation &
found to be working satisfactory.

OUTPUT TESTING

Asking the user about the format required by them tests the output generated by the system under
consideration .It can be done in two ways, One on screen and other on printer format. The output
format on the screen is found to be correct as the format designed n system test.

SYSTEM TESTING
In the system testing the whole system is tested for interface between each module
and program units are tested and recorded. This testing is done with sample data.
The securities, communication between interfaces are tested

System testing is actually a series of different tests whose primary purpose is to


fully exercise the computer based system although each test has a different
purpose all work to verify that all system elements properly integrated and perform
allocate function.

It involves two kinds of activities namely

1. Integrated testing

2. Acceptance testing

Integrated testing

Integrated testing is a systematic technique for constructing tests to uncover errors associated
with interface.

Objective is to take unit tested modules and build a program structure that has been dictated by
design

18 | P a g e
Acceptance testing

Acceptance testing involves planning an execution of a functional test, performance test and
stress test to verify that the implemented system satisfies the requirement.

The acceptance testing is the final stage of the user the various possibilities of the data are
entered and the results are tested.

Validation testing

Software validation is achieved through a series of test that demonstrates the conformity and
requirements. Thus the proposed system under consideration has to be tested by validation and
found to be working satisfactorily. For example in customer enters phone number field should
contain number otherwise it produces an error message similarly in all the forms the fields are
validated

Testing results

All the tests should be traceable to customer requirements the focus of testing will shift
progressively from programs Exhaustive testing is not possible To be more effective testing
should be which has probability of finding errors

The following are the attributes of good test

1. A good test has a probability of finding a errors

2. A good test should be “best of breeds”

3. A good test to neither simple nor too complex

19 | P a g e
QUALITY ASSURANCE

Quality assurance consists of the auditing and reporting functions of management. The goal of
quality assurance is to provide management with the data entries necessary to be informed about
the product quality thereby gaining the goal of insight and confidence that the product quality is
meeting

Greater emphasis on quality in organization requires quality assurance. To be an integral part of


the information system development .The development process must include checks throughout
the process to ensure that the final product meets the original user requirements.

Quality assurance thus becomes an important component of the development process It’s
included in the industry standard (IEEE 1993) On the development process quality assurance
process is integrated into a linear development cycle through validation and verification
performed at crucial system development steps .The goals of the management is to institute and
monitor a quality assurance program with in the development process

Quality assurance induces

1. Validation of the system against requirements

2. Checks for errors in design documents and in the system itself

3. Quality assurance for usability

Quality assurance Goals:

Correctness: The extent to which the program meets the system specifications and user
objectives

Reliablility: The degree to which the system performs its intended functions overtime

Efficiency: The amount of computer resources required by a program to perform a


function

20 | P a g e
Usability: The effort required learning and operating a system

Maintainability: To use with which program errors are located and corrected

Testability: The effort required a testing a program to ensure its correct performance

Portability: To ease of transporting a program from hardware configuration to another

Accuracy: The required position in input editing computation and output

21 | P a g e
GENERIC RISKS

Risk identification is the systematic attempt to specify threats to the project plan (estimates the
schedule resource overloading etc.). By identifying know and predictable risk the first step is to
avoiding them. When possible and controlling them when necessary there are two types of risk.

1. Generic Risk
2. Product specific risk
Generic risks are potential threats to every software project. Only those with a clear
understanding of technology can identify product specific risk The people and the environment
that is specific to the project at a hand and to identify the product specific risk and the project the
plan and the software statement of scope are examined and answer to the following question is
developed.

What special characteristics of this product may threaten the project plan.

One method for identifying risk is to create a risk item and checklists. The checklist can be used
for risk identification and focus on some subset to know and predictable risk in the following sub
categories.

1. Product risk
2. Risk associated with overall size of software to built or modified
3. Business imparts
4. Risk associated with constraints imposed with management
5. Customer characteristics

Risk associated with sophisticated of the customer and developers ability to communicate
with the customer in a timely manner.

Different categories of risks are considered

Project Risks
It identify a potential budgetary, schedule, personnel like staffing, organizing, resource, customer
requirement, problems and their impact on a software project
22 | P a g e
Technical risks

Technical risks identify potential design implementation interface, verification, and maintenance
problems.

SECURITY TECHNOLOGIES AND POLICIES

Any system developed should be secured & protected against possible hazards. Security
measures are provided to prevent unauthorized access to database at various levels. Password
protection & simple procedures to change the unauthorized access are provided to the users.

The user will have to enter the user name and password and if it is validated he can participate in
auction. Otherwise if he/she is a new user he should get registered and then he can place an order

When he/she registered they should provide authentication through jpg files (like ration card
Xerox, voter identity card Xerox). A multi layer security architecture comprising firewalls
filtering routers encryption & digital certification must be assured in this project in real time that
order details are protected from unauthorized access.

23 | P a g e
SYSTEM IMPLEMENTATION

Implementation is the stage in the project where the theoretical design is turned into a working
system. The most crucial stage is achieving a successful new system and giving a user
confidence in that the new system will work efficiently and effectively in the implementation
stage. The stage consist of

 Testing a developed program with sample data


 Detection and correction of error
 Creating whether the system meets a user requirement.
 Making necessary changes as desired by users.
 Training user personal

24 | P a g e
IMPLEMENTATION PROCEDURES

The implementation phase is less creative than system design. A system design may be dropped
at any time prior to implementation, although it becomes more difficult when it goes to the
design phase. The final report of the implementation phase includes procedural flowcharts,
record layouts, and a workable plan for implementing the candidate system design into a
operational design.

USER TRAINING

It is designed to prepare the users for testing & converting the system. There is several
ways to trail the users they are:

1) User manual

2) Help screens

3) Training demonstrations.

1) User manual:
The summary of important functions about the system & software can be provided as a
document to the user. User training is designed to prepare the user for testing and convening a
system

The summary of important functions about the system and the software can be provided as a
document to the user

1. Open http page


2. Type the file name with URL index .php in the address bar
3. Index. php is opened existing user the type the username and password
4. Click the submit button

25 | P a g e
2) Help screens:
This features now available in every software package, especially when it is used
with a menu. The user selects the “Help” option from the menu. The System success the
necessary description or information for user reference.

3) Training demonstration:

Another user training element is a training demonstration. Live demonstration with


personal contact is extremely effective for training users.

OPERATIONAL DOCUMENTATION

Documentation means of communication; it establishes the design and performance criteria of


the project. Documentation is descriptive information that portrays the use and /or operation of
the system. The user will have to enter the user name and password if it is valid he participate in
auction. Otherwise if it is new user he needs to register

Documentation means of communication; it establishes design & performance criteria for phases
of the project. Documentation is descriptive information that portrays he use &/or operation of
the system.

1) Documentation tools:

Document production & desktop publishing tool support nearly ever aspect of software
developers. Most software development organizations spend a substantial amount of time
developing documents, and in many cases the documentation process itself is quite inefficient. It
is not use unusual for a software development effort on documentation. For this reason,
Documentation tools provide an important opportunity to improve productivity.

2) Document restructuring:

Creating document is far too timed consuming. If the system work’s, we’ll live with what
we have. In some cases, this is the correct approach. It is not possible to recreate document for
hundreds of computer programs.

26 | P a g e
Documentation must be updated, but we have limited resources. It may not be necessary to fully
redocument an application. Rather, those portions of the system that are currently undergoing
change are fully documented.

The system is business critical and must be fully redocumented. Even in this case, an intelligent
approach is to pare documentation to an essential minimum.

SYSTEM MAINTENANCE

Maintenance is actually implementation of the review plan as important as it is


programmers and analyst is to perform or identify with him or herself with the maintenance. There
are psychologically personality, and professional reasons for this. Analyst and programmers spend
fair more time maintaining programmer then they do writing them Maintenances account for 50-
80% of total system development. Maintenance is expensive .One way to reduce the maintenance
costs are through maintenance mgt and software modification audits Types of maintenance are

1.
Perfective maintenance
2.
Preventive maintenance
Perfective maintenance:

Changes made to the system to add features or to improve the performance.

Preventive maintenance:

Changes made to the system to avoid future problems. Any changes can be made in the
future and our project can adopt the changes.

27 | P a g e
MYSQL

MySQL Server is a powerful database management system and the user can create application
that requires little or no programming. It supports GUI features and an entire programming
language, Phpmyadmin which can be used to develop richer and more developed application.
There are quite a few reasons, the first being that MySQL is a feature rich program that can
handle any database related task you have. You can create places to store your data build tools
that make it easy to read and modify your database contents, and ask questions of your data.
MySQL is a relational database, a database that stores information about related objects. In
MySQL that database means a collection of tables that hold data. It collectively stores all the
other related objects such as queries, forms and reports that are used to implement function
effectively.

The MySQL database can act as a back end database for PHP as a front end, MySQL supports
the user with its powerful database management functions. A beginner can create his/her own
database very simply by some mouse clicks. Another good reason to use MySQL as backend tool
is that it is a component of the overwhelmingly popular Open source software.

Conclusion:

This way the objectives mentioned in this project have been met and taken care of by writing the
code for giving exams, taking exams and grading exams and providing a powerful tool in the
professor/teacher’s hands.

Future Work:

A lot can be added and this can be made into a complete commercial system, which will extend and
support the complete education framework.

Reference

Acharya, Kamal. "STUDENT INFORMATION MANAGEMENT


SYSTEM." Authorea Preprints (2023).
Acharya, Kamal. "Library Management System." Available at SSRN4807104 (2019).
ACHARYA, KAMAL, et al. "LIBRARY MANAGEMENT SYSTEM." (2019).
Acharya, Kamal. "Online bus reservation system project report." Authorea

28 | P a g e
Preprints (2024).
Acharya, Kamal. "Online bus reservation system project report." (2024).
Acharya, Kamal. “Online Bus Reservation System.” SSRN ElectroNIC ASIA
Journal (2024): n. pag.
Acharya, Kamal. “Student Information Management System Project.” SSRN
ElectroNIC ASIA Journal (2024): n. pag.
Acharya, Kamal. “ATTENDANCE MANAGEMENT SYSTEM.” International
Research Journal of Modernization in Engineering Technology and
Science (2023): n. pag.
Acharya, Kamal. “College Information Management System.” SSRN ElectroNIC
ASIA Journal (2024): n. pag.
Acharya, Kamal, Attendance Management System Project (April 28, 2024).
Available at
SSRN: https://ssrn.com/abstract=4810251 or http://dx.doi.org/10.2139/ssrn.4810251
Acharya, Kamal, Online Food Order System (May 2, 2024). Available at
SSRN: https://ssrn.com/abstract=4814732 or http://dx.doi.org/10.2139/ssrn.4814732
Acharya, Kamal, University management system project. (May 1, 2024). Availableat
SSRN: https://ssrn.com/abstract=4814103 or http://dx.doi.org/10.2139/ssrn.4814103
Acharya, Kamal, Online banking management system. (May 1, 2024). Available at
SSRN: https://ssrn.com/abstract=4813597 or http://dx.doi.org/10.2139/ssrn.4813597
Acharya, Kamal, Online Job Portal Management System (May 5, 2024). Available at
SSRN: https://ssrn.com/abstract=4817534 or http://dx.doi.org/10.2139/ssrn.4817534
Acharya, Kamal, Employee leave management system. (May 7, 2024). Available
at SSRN: https://ssrn.com/abstract=4819626 or http://dx.doi.org/10.2139/ssrn.4819626
Acharya, Kamal, Online electricity billing project report. (May 7, 2024). Available at
SSRN: https://ssrn.com/abstract=4819630 or http://dx.doi.org/10.2139/ssrn.4819630
Acharya, Kamal, POLICY MANAGEMENT SYSTEM PROJECT REPORT. (December 10, 2023).
Available at
SSRN: https://ssrn.com/abstract=4831694 or http://dx.doi.org/10.2139/ssrn.4831694
Acharya, Kamal, Online job placement system project report. (January 10, 2023). Available at
SSRN: https://ssrn.com/abstract=4831638 or http://dx.doi.org/10.2139/ssrn.4831638
Acharya, Kamal, Software testing for project report. (May 16, 2023). Available at
SSRN: https://ssrn.com/abstract=4831028 or http://dx.doi.org/10.2139/ssrn.4831028
Acharya, Kamal, ONLINE CRIME REPORTING SYSTEM PROJECT. (August 10, 2022).
Available at
SSRN: https://ssrn.com/abstract=4831015 or http://dx.doi.org/10.2139/ssrn.4831015

29 | P a g e
Acharya, Kamal, Burber ordering system project report. (October 10, 2022). Available at
SSRN: https://ssrn.com/abstract=4832704 or http://dx.doi.org/10.2139/ssrn.4832704
Acharya, Kamal, Teachers Record Management System Project Report (December 10, 2023).
Available at
SSRN: https://ssrn.com/abstract=4833821 or http://dx.doi.org/10.2139/ssrn.4833821
Acharya, Kamal, Dairy Management System Project Report (December 20, 2020). Available at
SSRN: https://ssrn.com/abstract=4835231 or http://dx.doi.org/10.2139/ssrn.4835231
Acharya, Kamal, Electrical Shop Management System Project (December 10, 2019). Available
at SSRN: https://ssrn.com/abstract=4835238 or http://dx.doi.org/10.2139/ssrn.4835238
Acharya, Kamal, Online book store management system project report. (Febuary 10, 2020).
Available at
SSRN: https://ssrn.com/abstract=4835277 or http://dx.doi.org/10.2139/ssrn.4835277
Acharya, Kamal, Paint shop management system project report. (January 10, 2019). Available
at SSRN: https://ssrn.com/abstract=4835441 or http://dx.doi.org/10.2139/ssrn.4835441
Acharya, Kamal, Supermarket billing system project report. (August 10, 2021). Available at
SSRN: https://ssrn.com/abstract=4835474 or http://dx.doi.org/10.2139/ssrn.4835474
Acharya, Kamal, Online texi booking system project report. (March 10, 2022). Available at
SSRN: https://ssrn.com/abstract=4837729 or http://dx.doi.org/10.2139/ssrn.4837729
Acharya, Kamal, Online car servicing system project report. (March 10, 2023). Available at
SSRN: https://ssrn.com/abstract=4837832 or http://dx.doi.org/10.2139/ssrn.4837832
Acharya, Kamal, School management system project report. (July 10, 2021). Available at
SSRN: https://ssrn.com/abstract=4837837 or http://dx.doi.org/10.2139/ssrn.4837837
Acharya, Kamal, Furniture Showroom Management System Project Report (March 21, 2021).
Available at
SSRN: https://ssrn.com/abstract=4839422 or http://dx.doi.org/10.2139/ssrn.4839422
Acharya, Kamal, Online Vehicle Rental System Project Report (March 21, 2019). Available at
SSRN: https://ssrn.com/abstract=4839429 or http://dx.doi.org/10.2139/ssrn.4839429
Acharya, Kamal, Fruit Shop Management System Project Report (August 10, 2023). Available at
SSRN: https://ssrn.com/abstract=4841048 or http://dx.doi.org/10.2139/ssrn.4841048
Acharya, Kamal, Hall Booking Management System Project Report (December 21, 2023).
Available at
SSRN: https://ssrn.com/abstract=4841055 or http://dx.doi.org/10.2139/ssrn.4841055
Acharya, Kamal, Lundry Management System Project Report (October 21, 2023). Available at
SSRN: https://ssrn.com/abstract=4841059 or http://dx.doi.org/10.2139/ssrn.4841059
Acharya, Kamal, A CASE STUDY OF CINEMA MANAGEMENT SYSTEM PROJECT
(September 25, 2023). Available at
SSRN: https://ssrn.com/abstract=4841209 or http://dx.doi.org/10.2139/ssrn.4841209
Acharya, Kamal, A CASE STUDY ON ONLINE TICKET BOOKING SYSTEM PROJECT (May
25, 2024). Available at
SSRN: https://ssrn.com/abstract=4841210 or http://dx.doi.org/10.2139/ssrn.4841210
30 | P a g e
Acharya, Kamal, ONLINE DATING MANAGEMENT SYSTEM PROJECT REPORT. (April 25,
2023). Available at
SSRN: https://ssrn.com/abstract=4842066 or http://dx.doi.org/10.2139/ssrn.4842066
Acharya, Kamal, ONLINE RESUME BUILDER MANAGEMENT SYSTEM PROJECT REPORT.
(April 25, 2021). Available at
SSRN: https://ssrn.com/abstract=4842071 or http://dx.doi.org/10.2139/ssrn.4842071
Acharya, Kamal, TOLL TEX MANAGEMENT SYSTEM PROJECT REPORT (August 21, 2023).
Available at
SSRN: https://ssrn.com/abstract=4842082 or http://dx.doi.org/10.2139/ssrn.4842082
Acharya, Kamal, Chat Application Through Client Server Management System Project Report
(June 25, 2023). Available at
SSRN: https://ssrn.com/abstract=4842761 or http://dx.doi.org/10.2139/ssrn.4842761
Acharya, Kamal, Web Chatting Application Management System Project Report (April 25,
2022). Available at
SSRN: https://ssrn.com/abstract=4842771 or http://dx.doi.org/10.2139/ssrn.4842771
Acharya, Kamal, Automobile management system project report (May 25, 2022). Available at
SSRN: https://ssrn.com/abstract=4846917 or http://dx.doi.org/10.2139/ssrn.4846917
Acharya, Kamal, College bus management system project report (April 25, 2023). Available at
SSRN: https://ssrn.com/abstract=4846920 or http://dx.doi.org/10.2139/ssrn.4846920
Acharya, Kamal, Courier management system project report (May 25, 2023). Available at
SSRN: https://ssrn.com/abstract=4846922 or http://dx.doi.org/10.2139/ssrn.4846922
Acharya, Kamal, Event management system project report (April 25, 2021). Available at
SSRN: https://ssrn.com/abstract=4846927 or http://dx.doi.org/10.2139/ssrn.4846927
Acharya, Kamal, Library management system project report II (May 25, 2020). Available at
SSRN: https://ssrn.com/abstract=4848857 or http://dx.doi.org/10.2139/ssrn.4848857

31 | P a g e

You might also like