SY8113

High Efficiency, 500kHz, 3A, 16V Input

Synchronous Step Down Regulator

General Description Features

The SY8113 is a high efficiency 500 kHz synchronous low RDS(ON) for internal switches (top/botto
step-down DC-DC converter capable of delivering 3A 80m /40m
current. The SY8113 operates over a wide input 4.5-16V input voltage range
voltage range from 4.5V to 16V and integrates main 3A output current capability
switch and synchronous switch with very low RDS(ON) 500 kHz switching frequency
to minimize the conduction loss. Instant PWM architecture to achieve fast transient
responses.
Low output voltage ripple and small external inductor Internal softstart limits the inrush current
and capacitor sizes are achieved with 500 kHz
1.5% 0.6V reference
switching frequency. It adopts the instant PWM
architecture to achieve fast transient responses for high TSOT23-6 package
step down applications
Applications
Ordering Information
SY8113 ( ) Set Top Box
Temperature Code Portable TV
Package Code Access Point Router
Optional Spec Code DSL Modem
Temperature Range: -40°C to 85°C LCD TV
Ordering Number Package type Note
SY8113ADC TSOT23-6 --

Typical Applications

Figure 1. Schematic Diagram

SY8113 Rev.0.1A Silergy Corp. Confidential-prepared for Internal Use Only 1

 SY8113
Pinout (top view)

TSOT23-6(FC)
Top Mark: ML , (Device code: ML,

Pin Name Pin Number Pin Description

BS 1 Boot-Strap Pin. Supply high side gate driver. Decouple this pin to LX pin with
0.1uF ceramic cap.
GND 2 Ground pin
FB 3 Output Feedback Pin. Connect this pin to the center point of the output resistor
divider (as shown in Figure 1) to program the output voltage:
Vout=0.6*(1+R1/R2)
EN 4 Enable control. Pull high to turn on. Do not float.
IN 5 Input pin. Decouple this pin to GND pin with at least 1uF ceramic cap
LX 6 Inductor pin. Connect this pin to the switching node of inductor

Absolute Maximum Ratings (Note 1)

Supply Input Voltage ------------------------------------------------------------------------------------------------ 18V
Enable Voltage-------------------------------------------------------------------------------------------------------- VIN + 0.3V
FB Voltage ----------------------------------------------------------------------------------------------------------- 4V
Power Dissipation, PD @ TA = 25°C, TSOT23-6 FC ----------------------------------------------------- TBD
Package Thermal Resistance (Note 2)
JA -------------------------------------------------------------------------------------------------------------- TBD
JC -------------------------------------------------------------------------------------------------------------- TBD
Junction Temperature Range --------------------------------------------------------------------------------------- 125°C
Lead Temperature (Soldering, 10 sec.) ---------------------------------------------------------------------------- 260°C
Storage Temperature Range ------------------------------------------------------------------------------------- -65°C to 150°C

Recommended Operating Conditions (Note 3)

Supply Input Voltage ---------------------------------------------------------------------------------------------- 4.5V to 16V
Junction Temperature Range ----------------------------------------------------------------------------------- -40°C to 125°C
Ambient Temperature Range ----------------------------------------------------------------------------------- -40°C to 85°C

SY8113 Rev.0.1A Silergy Corp. Confidential-prepared for Internal Use Only 2

 SY8113

Electrical Characteristics
(V IN = 12V, VOUT = 1.2V, L = 2.2uH, COUT = 47uF, TA = 25°C, IOUT = 1A unless otherwise specified)

Parameter Symbol Test Conditions Min Typ Max Unit

Input Voltage Range VIN 4.5 16 V
Quiescent Current IQ IOUT=0, VFB=VREF*105% 100 µA
Shutdown Current ISHDN EN=0 5 10 µA
Feedback Reference VREF 0.591 0.6 0.609 V
Voltage
FB Input Current IFB VFB=3.3V -50 50 nA
Top FET RON RDS(ON)1 80 m
Bottom FET RON RDS(ON)2 40 m
Bottom FET Valley ILIM 3 A
Current Limit
EN Rising Threshold VENH 1.5 V
EN Falling Threshold VENL 0.4 V
Input UVLO Threshold VUVLO 4.5 V
UVLO Hysteresis VHYS 0.3 V
Min ON Time 80 ns
Min OFF Time 100 ns
Switching Frequency 500 kHz
Thermal Shutdown TSD 150 °C
Temperature
Thermal Shutdown THYS 15 °C
Hysteresis

Note 1: Stresses beyond the “Absolute Maximum Ratings ma anent damage to the device. These are
stress ratings only. Functional operation of the device at these o onditions beyond those indicated in the
operational sections of the specification is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.

Note 2: JA is measured in the natural convection at TA = 25°C on a low effective 4-layer thermal conductivity test
board of JEDEC 51-3 thermal measurement standard. Pin2 of TSOT23-6 packages is the case position for JC
measurement.

Note 3: The device is not guaranteed to function outside its operating conditions

SY8113 Rev.0.1A Silergy Corp. Confidential-prepared for Internal Use Only 3

 SY8113
TSOT23-6L (FC)Package outline & PCB layout
1.90
2.80 - 3.10

0.95 0.60 0.30 - 0.50

Recommended Pad Layout

1.00 (max)

0.95 TYP
0.3 - 0.6 1.90 TYP

Notes: All dimension in MM

All dimension don’t not include mold flash & metal burr

SY8113 Rev.0.1A Silergy Corp. Confidential-prepared for Internal Use Only 4