VIBROTIP®

VIBTOOL®
Machine diagnostics
Data collection

Catalog

PRÜFTECHNIK
Condition Monitoring
[email protected]
Edition: 11-2014
Ord.No.: LIT 86.700.EN
Legal notices
Both this catalog and the product it describes are copyrighted. All rights belong to the
publisher. The catalog may not be copied, reproduced, translated or made accessible to a
third party in any form, neither in its entirety nor as an excerpt.
No liability may be claimed against the publisher regarding the product described in this
catalog. The publisher assumes no liability for accuracy of the catalog contents. Further-
more, under no circumstances may the publisher be held liable for direct or indirect dam-
age of any kind resulting from use of the product or the catalog, even if the publisher has
expressly indicated the potential for occurrence of such damage.
The publisher assumes no liability for any product defects. This warranty and liability limita-
tion applies to all distributors and sales partners as well.
The trademarks mentioned in this catalog are generally noted as such and are the property
of their owners. Lack of such designation does not imply, however, that names are not
protected by trademark laws.
© 2011 PRÜFTECHNIK Condition Monitoring; all rights reserved
Contents

Contents

Order no. Product description Page

Chapter 1
VIBROTIP Data collector
VIBROTIP - Machine analyzer and data collector................................................................................................................................. 6
VIB 8.635 : VIBROTIP ‘Multimeter‘ package................................................................................................................................ 8
VIB 8.820 : VIBROTIP ‘Maintenance‘ package............................................................................................................................. 9
VIB 8.820 EX : VIBROTIP ‘Maintenance‘ package with instrinsic safety........................................................................................... 10
VIB 8.830 : VIBROTIP ‘Trending‘ package................................................................................................................................. 11
VIB 8.840 : VIBROTIP ‘VIBCODE‘ package................................................................................................................................ 12
VIB 8.841 : Additional VIBCODE package for VIBROTIP............................................................................................................ 13
VIB 4.701-2 : Straight connection cable for CLD-type accelerometer, BNC angled plug, 2 meters................................................ 14
VIB 4.701-5 : Straight connection cable for CLD-type accelerometer, BNC angled plug, 5 meters ............................................... 14
VIB 4.702-2 : Straight connection cable for CLD-type accelerometer, Microdot angled plug, 2 meters......................................... 14
VIB 4.702-5 : Straight connection cable for CLD-type accelerometer, Microdot angled plug, 5 meters ........................................ 14
VIB 4.704-2 : Straight connection cable for CLD-type accelerometer, TNC angled plug, 2 meters................................................. 14
VIB 4.704-5 : Straight connection cable for CLD-type accelerometer, TNC angled plug, 5 meters ................................................ 14
VIB 321926-2 : Spiral connection cable for CLD-type accelerometer, TNC plug, 2 meters................................................................ 14
VIB 8.618-1,5 : TIPTECTOR cable, straight, 1.5 meters long ........................................................................................................... 15
VIB 8.618-5 : TIPTECTOR cable, straight, 5 meters long .............................................................................................................. 15
VIB 8.605: Spare temperature probe for VIBROTIP................................................................................................................... 16
VIB 4.705 : BNC to QLA adapter.............................................................................................................................................. 17
VIB 8.617 : QLA angled plug.................................................................................................................................................... 17
VIB 8.746-VD: SPM adapter for VIBROTIP ................................................................................................................................... 18
VIB 8.619-USB : Serial to USB cable adapter for VIBROTIP EX........................................................................................................... 19
VIB 8.862 : OMNITREND for VIBROTIP, software package......................................................................................................... 20
VIB 8.863 : VIBROTIP device driver for OMNITREND................................................................................................................. 20
VIB 8.862-P : PC licence for VIBROTIP......................................................................................................................................... 20

Chapter 2
VIBTOOL PDA measurement transducer
VIBTOOL PDA measurement transducer with Bluetooth communication........................................................................................... 22
VIB 2.760 EU : VIBTOOL delivery package for the E.C.................................................................................................................... 24
VIB 2.760 UK : VIBTOOL delivery package for the United Kingdom................................................................................................ 24
VIB 2.760 US : VIBTOOL delivery package for the U.S.A................................................................................................................ 24
VIB 6.142RVTSET :Transducer set for VIBTOOL and VIBROTIP EX...................................................................................................... 25

Index
Index by order number .................................................................................................................................................................... 26

www.pruftechnik.com – 11.2014 Page 3

 Chapter 1
VIBROTIP Data collector
 VIBROTIP / VIBTOOL Chapter 1: VIBROTIP Data collector

VIBROTIP - Machine analyzer and data collector

1
Vibration severity

2 Bearing condition

Temperature

Rotational speed

Pump cavitation

Windows software

Location identification

Intrinsic safety (option)

Five most-wanted measurements and a data The non-contact contrast sensor measures RPM at dis-
collector in one! tances up to 1 m (39”), with no need for a power-con-
VIBROTIP offers a rational approach to measuring, display- suming light source of its own.
ing and storing five of the most vital indications of rotat- The flexible temperature probe flips out of the way when
ing equipment condition. Imagine measuring vibration not in use and maintains proper probe contact regardless
level, bearing condition, cavitation, rotation speed and of application angle. It can also be used to measure the
temperature with only one instrument! Together with temperature of liquids.
the OMNITREND PC software VIBROTIP provides detailed
analysis and reporting capabilities on the PC. For route- Trending version or multimeter?
based data collection VIBROTIP can be programmed from The standard model (VIB 8.650) allows data transfer with
the OMNITREND database with many measurement tasks. a PC via RS-232C interface for reliable automated trend-
ing when used with OMNITREND software for Windows.
Designed for industrial use It also accepts the VIBCODE intelligent probe for auto-
VIBROTIP is rugged: its extremely robust, rubberized IP65 matic recognition of measurement locations.
housing withstands shocks, chemicals, water spray and
dirt. All sensors are already built into the instrument, with Extremely easy to use, the VIBROTIP multimeter (VIB 8.630)
no cumbersome cables or fragile plugs. If desired, howev- provides the ideal solution for those looking for a rugged,
er, external sensors may be plugged into a socket on the yet affordable machine condition multimeter. It provides
top of the VIBROTIP. An intrinsically safe version is avail- all the basic advantages described above at an economi-
able as an option. cal price. It is not, however, capable of transferring mea-
surements to a PC or using VIBCODE for automatic loca-
Keep abreast of changing conditions tion recognition, nor may it be upgraded to include these
VIBROTIP automatically shows you the change in signal capabilities.
level since the previous reading stored in the same mem-
ory location.

Rugged, accurate built-in sensors

The patented Tandem-Piezo® dual function accelerometer
is ideal for both vibration severity readings as well as reli-
able shock pulse measurement (for bearing condition and
pump cavitation); the contoured tip minimizes contact
resonance.

Page 6 www.pruftechnik.com – 11.2014

VIBROTIP / VIBTOOL Chapter 1: VIBROTIP Data collector

Technical data

PARAMETER VIB 8.650 VIB 8.650 EX VIB 8.630

Sensor Built-in tandem piezo accelerometer

Meas. range (r.m.s.) < 50 mm/s; max. value depends on sensor type and signal frequency
1
Vibration

Meas. quantities RMS or peak-peak or 0-peak

Frequency range  10 Hz ... 1 kHz

2
Resolution 0,1 mm/s

Accuracy ± 5% (DIN 45666)

Sensor Built-in tandem piezo accelerometer

Bearing c. / Cavitation

Meas. range - 9 ... +80 dB

Meas. quantities Carpet value, Max value (bearing measurements only)

Meas. units dBSV, dBN, dBC

Resolution 1 dB

Sensor Built-in NiCrNi temperature probe; external probes available

Temperature

Meas. range -30° C ... + 270° C

Meas. units °C, °F (selectable)

Accuracy ± 3% / ± 1 digit

Sensor Built-in optical tachometer

Rotational speed

Meas. range 60  ...   30,000 rpm

Meas. units 1 rpm

Resolution 1 rpm / 0,1%

Meas. distance < 1 meter

Capacity > 1000 locations w/o trending software (or 398 per function) --
Data collector

Routing < 6144 measurement values may be stored --

Interface Serial - RS-232C --
Data rate 9600 Baud --

Display LCD segment

Env. protection IP 65 (water-proofed / dust-proofed); chemical protection; shock resistant

Temperature range, op. 0°C ... + 60°C

General parameters

Weight 300 g

Dimensions see figure below

9V battery: IEC 6LR61 (Alkaline / Lithium); 9V battery: IEC 6LR61 (Alkaline) 9V battery: IEC 6LR61 (Alkaline / Lithium);
Power supply
opt. rechargeabel batteries (NiCd / NiMH) DURACELL Procell MN1604 opt. rechargeabel batteries (NiCd / NiMH)
Operation approx. 10 h (Alkaline) / 20 h (Lithium) / 3 h (rechargeabel batteries)

Automatic shut off yes

Instrinsic safety -- II 2 G Ex ib IIC T4 --

Dimensions
81 mm

32 mm

180 mm

www.pruftechnik.com – 11.2014 Page 7

 VIBROTIP / VIBTOOL Chapter 1: VIBROTIP Data collector

VIB 8.635 : VIBROTIP ‘Multimeter‘ package

1
1

VIB 8.829 VIB 8.612

VIB 8.630
VIB 9.538.G VIB 9.542.G LIT 01.800
MN1604
6LR61

ALKALINE
ALKALINE
9,0V

VIB 8.697
VIB 8.610 90109

Description Scope of supply

The VIBROTIP ‚multimeter‘ provides a low-priced and VIB 8.610 Countersink bit for preparation of mea-
easy-to-use, yet powerful way to reliably determine ma- surement points
chine operating condition. This multimeter contains all VIB 8.612 Carrying strap
the basic features of VIBROTIP, but cannot be used with holds VIBROTIP on trouser belt
VIBCODE measurement studs or the OMNITREND PC pro- VIB 8.630 VIBROTIP multimeter
gram (nor can it be updated later to do so.) VIB 8.697 Torx screwdriver for battery replacement,
size 10
VIB 8.829 VIBROTIP case
VIB 9.538.G VIBROTIP multimeter,
operating instructions
VIB 9.542.G VIBROTIP multimeter
short instructions
LIT 01.800 CD ROM, Condition Monitoring catalogs,
brochures, magazines
90109 9V battery

Page 8 www.pruftechnik.com – 11.2014

VIBROTIP / VIBTOOL Chapter 1: VIBROTIP Data collector

VIB 8.820 : VIBROTIP ‘Maintenance‘ package

1
1

VIB 8.829 VIB 8.612

VIB 8.650
VIB 9.498.G VIB 9.519.G LIT 01.800
MN1604
6LR61

ALKALINE
ALKALINE
9,0V

VIB 8.697
VIB 8.610 90109

Description Not shown:

The VIBROTIP ‘maintenance’ package offers an economi- VIB 4.305 Contrast marking fluid for rpm measure-
cal means of obtaining all the basic benefits of the VI- ment
BROTIP instrument (including trend data collection) while
retaining the option of upgrading later for use with VIB- May be upgraded to trending package with:
CODE measurement studs or the OMNITREND PC pro- VIB 8.646 OMNITREND upgrade package VIBROTIP
gram. ‘maintenance’ to ‘trend’
consists of:
Scope of supply VIB 8.619-USB VIBROTIP USB cable
VIB 8.610 Countersink bit for preparation of mea- VIB 8.862 OMNITREND PC software
surement points VIB 8.862-P VIBROTIP basic license for PC communica-
VIB 8.612 Carrying strap , holds VIBROTIP on trouser tion
belt
VIB 8.650 VIBROTIP instrument
VIB 8.697 Torx screwdriver for battery replacement,
size 10
VIB 8.829 VIBROTIP case
VIB 9.498.G VIBROTIP operating instructions
VIB 9.519.G VIBROTIP short instructions
LIT 01.800 CD ROM, Condition Monitoring catalogs,
brochures, magazines
90109 9V battery

www.pruftechnik.com – 11.2014 Page 9

 VIBROTIP / VIBTOOL Chapter 1: VIBROTIP Data collector

VIB 8.820 EX : VIBROTIP ‘Maintenance‘ package with instrinsic safety

1
1

2 ENT

VIB 8.829 VIB 8.612

M

VIB 8.650 EX
VIB 9.498.G VIB 9.519.D LIT 01.800

0044
MN1604
6LR61

ALKALINE
ALKALINE
9,0V

VIB 8.697
VIB 8.610 90109

Description Not shown:

The VIBROTIP ‘maintenance’ package with intrinsic safe- VIB 4.305 Contrast marking fluid for rpm measure-
ty offers an economical means of obtaining all the basic ment
benefits of the VIBROTIP EX instrument (including trend
data collection) while retaining the option of upgrading May be upgraded to trending package with:
later for use with VIBCODE measurement studs or the VIB 8.646 OMNITREND upgrade package VIBROTIP
OMNITREND PC program. ‘maintenance’ to ‘trend’
consists of:
Scope of supply VIB 8.619-USB VIBROTIP USB cable
VIB 8.610 Countersink bit for preparation of mea- VIB 8.862 OMNITREND PC software
surement points VIB 8.862-P VIBROTIP basic license for PC communica-
VIB 8.612 Carrying strap , holds VIBROTIP on trouser tion
belt
VIB 8.650 EX VIBROTIP EX instrument
VIB 8.697 Torx screwdriver for battery replacement,
size 10
VIB 8.829 VIBROTIP case
VIB 9.498.G VIBROTIP operating instructions
VIB 9.519.G VIBROTIP short instructions
LIT 01.800 CD ROM, Condition Monitoring catalogs,
brochures, magazines
90109 9V battery

Page 10 www.pruftechnik.com – 11.2014

VIBROTIP / VIBTOOL Chapter 1: VIBROTIP Data collector

VIB 8.830 : VIBROTIP ‘Trending‘ package

1
1

VIB 8.829 VIB 8.612

VIB 8.650

VIB 9.498.G VIB 9.519.G

VIB 9.631.G

VIB 8.862 LIT 01.800

MN1604
6LR61

ALKALINE
ALKALINE
9,0V

VIB 8.697
VIB 8.610 90109

VIB 8.619-USB

Description VIB 9.631.G OMNITREND, Getting started

The VIBROTIP 'trending' package provides full VIBROTIP LIT 01.800 CD ROM, Condition Monitoring catalogs,
trending features (including automated trend data evalu- brochures, magazines
ation with the OMNITREND PC program) while retaining 90109 9V battery
the option of upgrading later for use with VIBCODE mea-
surement studs. Not shown:
VIB 4.305 Contrast marking fluid for rpm measure-
Scope of supply ment
VIB 8.610 Countersink bit for preparation of mea- VIB 8.862-P VIBROTIP basic license for PC communica-
surement points tion
VIB 8.612 Carrying strap, holds VIBROTIP on trouser
belt
VIB 8.619-USB VIBROTIP USB cable May be upgraded to ‘VIBCODE’ package with
VIB 8.650 VIBROTIP instrument VIB 8.660 VD VIBCODE transducer
VIB 8.697 Torx screwdriver for battery replacement,
size 10 Note
VIB 8.829 VIBROTIP case A basic licence for PC communication (VIB 8.862-P) is
VIB 8.862 OMNITREND pc software contained in OMNITREND. Each additional VIBROTIP in-
VIB 9.498.G VIBROTIP operating instructions strument requires another licence.
VIB 9.519.G VIBROTIP short instructions

www.pruftechnik.com – 11.2014 Page 11

 VIBROTIP / VIBTOOL Chapter 1: VIBROTIP Data collector

VIB 8.840 : VIBROTIP ‘VIBCODE‘ package

1 1

2
®

VIB 8.829 VIB 8.612

VIB 8.650

VIB 9.498.G VIB 9.519.G LIT 01.800

VIB 9.631.G
VIB 9.834.G
MN1604
6LR61

ALKALINE
ALKALINE
9,0V

VIB 8.697 VIB 8.862 VIB 8.660 VD

VIB 8.610 90109

VIB 8.619-USB

Description VIB 9.519.G VIBROTIP short instructions

The VIBCODE package provides full VIBROTIP trending VIB 9.631.G OMNITREND, Getting started
features with the unique advantage of VIBCODE intelli- LIT 01.800 CD ROM, Condition Monitoring catalogs,
gent stud recognition, which guarantees completely reli- brochures, magazines
able measurement readings. VIB 9.834.G VIBCODE operating instructions
90109 9V battery
Scope of supply
VIB 8.610 Countersink bit for preparation of mea- Not shown:
surement points VIB 4.305 Contrast marking fluid f. rpm measure-
VIB 8.612 Carrying strap ment, not shown
VIB 8.619-USB VIBROTIP USB cable VIB 8.862-P VIBROTIP basic license for PC communica-
VIB 8.650 VIBROTIP instrument tion
VIB 8.660 VD VIBCODE transducer
VIB 8.697 Hex screwdriver for battery replacement, Note
size 10 A basic licence for PC communication (VIB 8.862-P) is
VIB 8.829 VIBROTIP case contained in OMNITREND. Each additional VIBROTIP in-
VIB 8.862 OMNITREND PC software strument requires another licence.
VIB 9.498.G VIBROTIP operating instructions

Page 12 www.pruftechnik.com – 11.2014

VIBROTIP / VIBTOOL Chapter 1: VIBROTIP Data collector

VIB 8.841 : Additional VIBCODE package for VIBROTIP

1
1

2
®

VIB 8.829 VIB 8.612

VIB 8.650
VIB 9.498.G VIB 9.519.D LIT 01.800
VIB 9.834.G
MN1604
6LR61

ALKALINE
ALKALINE
9,0V

VIB 8.697 VIB 8.660 VD

VIB 8.610 90109

VIB 8.619-USB

Description VIB 9.498.G VIBROTIP operating instructions

This additional VIBCODE package contains all compo- VIB 9.519.G VIBROTIP short instructions
nents of the VIBCODE standard package (VIB 8.840) ex- LIT 01.800 CD ROM, Condition Monitoring catalogs,
cept for the OMNITREND software. brochures, magazines
VIB 9.834.G VIBCODE operating instructions
Scope of supply 90109 9V battery
VIB 8.610 Countersink bit for preparation of mea-
surement points Not shown:
VIB 8.612 Carrying strap VIB 4.305 Contrast marking fluid f. rpm measure-
VIB 8.619-USB VIBROTIP USB cable ment, not shown
VIB 8.650 VIBROTIP instrument VIB 8.862-P VIBROTIP basic license for PC communica-
VIB 8.660 VD VIBCODE transducer tion
VIB 8.697 Hex screwdriver for battery replacement,
size 10
VIB 8.829 VIBROTIP case

www.pruftechnik.com – 11.2014 Page 13

 VIBROTIP / VIBTOOL Chapter 1: VIBROTIP Data collector

Connection cables for current line-drive (CLD) accelerometers

VIB 4.701-2 : Straight connection cable for CLD-type accelerometer, BNC angled plug, 2 meters
1 VIB 4.701-5 : Straight connection cable for CLD-type accelerometer, BNC angled plug, 5 meters
VIB 4.702-2 : Straight connection cable for CLD-type accelerometer, Microdot angled plug, 2 meters
VIB 4.702-5 : Straight connection cable for CLD-type accelerometer, Microdot angled plug, 5 meters
2 VIB 4.704-2 : Straight connection cable for CLD-type accelerometer, TNC angled plug, 2 meters
VIB 4.704-5 : Straight connection cable for CLD-type accelerometer, TNC angled plug, 5 meters
VIB 321926-2 : Spiral connection cable for CLD-type accelerometer, TNC plug, 2 meters

TNC

TNC

QLA
QLA

VIB 4.704-2 VIB 321926-2

Application Cable length

Standard sensor cable for connecting mobile CLD-type ac- VIB 4.70x-2 /-5 2 m / 5 m
celerometers to the VIBROTIP data collector. VIB 321926-2 0.4 ... 2.0 m
Accessories
VIB 8.617 QLA angled plug for VIBROTIP

Connection example
VIBCODE to VIBROTIP

VIB 321926-2

VIBCODE

EN
T

M
VIBROTIP
VIBROTIP

PRUFTECHNIK AG
R

Page 14 www.pruftechnik.com – 11.2014

VIBROTIP / VIBTOOL Chapter 1: VIBROTIP Data collector

TIPTECTOR cables to be connected to VIBROTIP

VIB 8.618-1,5 : TIPTECTOR cable, straight, 1.5 meters long

VIB 8.618-5 : TIPTECTOR cable, straight, 5 meters long 1

EN
T
TIPTECTOR,
long version

TNC

VIBROTIP

PRUFTECHNIK AG
R
VIBROTIP
QLA

Application Note
Spare connection cable for the TIPTECTOR probe. To disconnect the cable, first pull off the cap, and, with
the long version, unscrew the handle. Then unscrew the
TNC connector.

Connection example
1 Ma

T
0 d

S
H e in
yp .

z . G er .606
e
.N

..10 m a ny
V IB 1 01

k
00

Hz
8

TIPTECTOR, TIPTECTOR,
long version short version
1 Ma

T
0 de V IB 1 01

S
H
yp .

z .in G er .606
e
.N

..10 m a ny
kH z
00
8

TIPTECTOR grip
VIB 8.633

TIPTECTOR cable
VIB 8.618-1,5
VIB 8.618-5

www.pruftechnik.com – 11.2014 Page 15

 VIBROTIP / VIBTOOL Chapter 1: VIBROTIP Data collector

VIB 8.605: Spare temperature probe for VIBROTIP

2 EN
T

ON
M

Temperature
How to replace the VIBROTIP temperature probe

Application Technical data

The temperature probe VIB 8.605 is a spare part for the
built-in sensor, which can easily be levered out with a
PARAMETER VIB 8.605
screw driver. Its flexible, rubberized neck allows optimum
contact with the measuring location and temperature Type NiCrNi thermo couple
Measurement

measurements in liquids. Meas. range -30°C.. +270°C

Sensitivity  --

Accuracy < 3%
Dimensions
25 mm x 11 mm
(L x Ø)
Mechanical

Cable length --

Weight 6g

Connection QLA plug

Page 16 www.pruftechnik.com – 11.2014

VIBROTIP / VIBTOOL Chapter 1: VIBROTIP Data collector

QLA adapters for VIBROTIP

VIB 4.705 : BNC to QLA adapter

VIB 8.617 : QLA angled plug 1
QLA socket

QLA plug
2
BNC socket
QLA plug

VIB 4.705

VIB 8.617

Application used to connect external vibration sensors to VIBROTIP so

These adapters extend the connection options at the QLA that they do not interfere with measurements using the
input of the VIBROTIP data collector. built-in temperature probe or RPM sensor.
The VIB 4.705 adapter connects transducers with BNC
connector to the data collector. The VIB 8.617 adapter is

Connection example Connection example

VIB 8.617 to VIBROTIP and VIBCODE VIB 4.705 to VIBROTIP

VIB 4.705
VIB 8.617

EN
T

EN
T

M
VIBROTIP

PRUFTECHNIK AG
VIBROTIP

PRUFTECHNIK AG

R
R

www.pruftechnik.com – 11.2014 Page 17

 VIBROTIP / VIBTOOL Chapter 1: VIBROTIP Data collector

VIB 8.746-VD: SPM adapter for VIBROTIP

Application
The SPM adapter is used to connect the VIBROTIP data Application example
collector to existing SPM 40000 or TRA 30 measurement
sensors by converting the voltage signal to a current sig-
nal.
VIB 8.746

Note VIB 311221-1*

The SPM adapter may not be used in hazardous areas!

Technical data
SPM 40000 TRA30 w/ cable
PARAMETER VIB 8.746-VD

Input QLA VIB 32000 /

VIB 32010
General

Output TNC

Length approx. 240 mm

VIBROTIP
Diameter 16 mm

* This cable is not included in the scope of delivery

Page 18 www.pruftechnik.com – 11.2014

VIBROTIP / VIBTOOL Chapter 1: VIBROTIP Data collector

VIB 8.619-USB : Serial to USB cable adapter for VIBROTIP EX

1
Binder 5p, m USB
2
VIB 8.619-USB

Application Note
This cable adapter is used with the VIBROTIP EX data col- This cable adapter may only be connected outside the
lector for data transfer to a PC via an USB port. It protects hazardous area.
the data collector from damage caused by surges and This cable adapter can also be used with VIBROTIP with-
may only be connected temporarily - i.e. not permanent out intrinsic safety!
- to the USB port of a standard computer. The maximum
voltage Um on the USB port must not be greater than 60
volts, even under fault conditions.
Cable length approx. 1.5 m

Technical data

PARAMETER VIB 8.619-USB

VIB 8.619-USB
Connectors USB plug / Binder plug 5p
Electrical

Supply 5 VDC, from PC USB port

Length approx. 1.5 m EN

T

Operating temperature -20°C ... + 50°C

General

Storage temperature -30°C ... + 80°C

Relative humidity < 95%

M
Protection class IP 50
VIBROTIP

PRUFTECHNIK AG
R

VIBROTIP EX

www.pruftechnik.com – 11.2014 Page 19

 VIBROTIP / VIBTOOL Chapter 1: VIBROTIP Data collector

OMNITREND for VIBROTIP

VIB 8.862 : OMNITREND for VIBROTIP, software package

1 VIB 8.863 : VIBROTIP device driver for OMNITREND
VIB 8.862-P : PC licence for VIBROTIP

The OMNITREND software package VIB 8.862 contains Each further VIBROTIP is registered with a separate VIB
the CD ROM and the following items: 8.862-P PC license.
Order information
VIB 8.862-P PC licence To simplify the order processing, please fax any existing
(Communication password for one VI- registration certificates when ordering.
BROTIP instrument)
VIB 8.862-OMT Password certificate
(Registration of the OMNITREND full ver-
sion; will only be sent out after the request
for the registration password ('Return fax')
has been received.
VIB 9.631.G OMNITREND, Getting started

The device driver VIB 8.863 is required to operate the

OMNITREND software already available with the VIBROTIP.
VIB 8.863 contains:
VIB 8.862-P PC licence
(Communication password for one VI-
BROTIP instrument)
VIB 8.862-OMT Password certificate
(Registration of the OMNITREND full ver-
sion; will only be sent out after the request
for the registration password (‘Return fax’)
has been received.
VIB 9.631.G OMNITREND, Getting started

Page 20 www.pruftechnik.com – 11.2014

 Chapter 2
VIBTOOL PDA measurement transducer
 VIBROTIP / VIBTOOL Chapter 2: VIBTOOL PDA measurement transducer

VIBTOOL PDA measurement transducer with Bluetooth communication

1
Bluetooth Vibration velocity/
Vibration acceleration

2
Bearing condition

Temperature

PDA
Rotational speed

Cavitation

Intrinsic safety

0044

Transducer with wireless data transmission Rugged, accurate built-in sensors

VIBTOOL PDA (VIB 2.700 EX) is a handy, multi-functional The patented Tandem-Piezo® dual function accelerometer
tool for recording the most important condition param- is ideal for both vibration severity readings as well as re-
eters of rotating machines. Vibration, bearing condition, liable shock pulse measurement (for bearing condition);
temperature and RPM can be measured with the inte- the contoured tip minimizes contact resonance.
grated sensors. These values can then be displayed on The non-contact contrast sensor measures RPM at dis-
the LCD display, and transferred wirelessly via a Bluetooth tances up to 0.2 meter, with no need for a power-con-
interface to any commercially-available PDA computer for suming light source of its own.
evaluation and archiving. The PDA computer contains the
corresponding application program which is separately The flexible temperature probe flips out of the way when
available for programming the measurement tasks and not in use and maintains proper probe contact regardless
for the administration of measurement locations in a da- of application angle. It can also be used to measure the
tabase. temperature of liquids.

Designed for industrial use

VIBTOOL is rugged: its extremely robust, rubberized IP65
housing withstands shocks, chemicals, water spray and
dirt (IP 65). All sensors are already built into the instru-
ment, with no cumbersome cables or fragile plugs. If de-
sired, however, external sensors may be plugged into a
socket on the top of the instrument. VIBTOOL is available
as an intrinsically safe version only.

Page 22 www.pruftechnik.com – 11.2014

VIBROTIP / VIBTOOL Chapter 2: VIBTOOL PDA measurement transducer

Technical data

PARAMETER VIB 2.700 EX

Sensor Built-in tandem piezo accelerometer

Meas. range, vibration velocity < 50 mm/s; max. value depends on sensor type and signal frequency 1
Meas. range, vibration acceleration < 961 m/s²; max. value depends on sensor type and signal frequency
Vibration

Frequency range, vibration velocity 2/10 Hz to 1/10 kHz

Frequency range, vibration acceleration

Meas. quantities
2/10/500 Hz to 1/10 kHz ; 1 kHz to 10 kHz

RMS or 0-peak
2
Accuracy ± 5% (DIN 45666)

Sensor Built-in tandem piezo accelerometer

Bearing c. / Cavitation

Meas. range - 9 ... +80 dB

Meas. quantities Carpet value, Max value (bearing measurements only)

Meas. units dBSV, dBN, dBC

Resolution 1 dB

Sensor Built-in NiCrNi temperature probe; external probes available

Temperature

Meas. range -30° C ... + 270° C

Meas. units °C, °F (selectable)

Accuracy ± 3% / ± 1 digit

Sensor Built-in optical tachometer

Rotational speed

Meas. range 60  ...   30,000 rpm

Meas. units 1 rpm / 0,1%

Resolution 1 rpm

Meas. distance < 0.2 meters

Display LCD segment

Interfaces Bluetooth - class 2 / serial (RS 232)

Env. protection IP 65 (water-proofed / dust-proofed); chemical protection; shock resistant

General parameters

Operating temperature -20°C ... + 60°C

Charging temperature 0°C ... + 40°C

Weight 300 g

Dimensions s. figure below

Power supply Li ion rechargeable battery

Operating time approx. 8 hours

Automatic shut off yes

Marking, explosive gas atmosphere II 2 G Ex ib IIC T4

EX

Marking, explosive dust atmosphere II 3 D T65°C IP65

Dimensions 81 mm

32 mm

180 mm

www.pruftechnik.com – 11.2014 Page 23

 VIBROTIP / VIBTOOL Chapter 2: VIBTOOL PDA measurement transducer

VIBTOOL delivery packages

VIB 2.760 EU : VIBTOOL delivery package for the E.C.

1 VIB 2.760 UK : VIBTOOL delivery package for the United Kingdom
VIB 2.760 US : VIBTOOL delivery package for the U.S.A.

VIB 2.729 VIB 2.720, or

VIB 2.721, or
VIB 2.722

VIB 9.497 VIB 2.700 EX

0044

Scope of delivery - VIB 2.760 EU:

VIB 2.700 EX VIBTOOL instrument incl. rechargeable
battery, intrinsically safe
VIB 2.720 VIBTOOL charger, EC version
VIB 2.729 VIBTOOL case
VIB 9.497.G VIBTOOL operating instructions

Scope of delivery - VIB 2.760 UK:

VIB 2.700 EX VIBTOOL instrument incl. rechargeable
battery, intrinsically safe
VIB 2.722 VIBTOOL charger, UK version
VIB 2.729 VIBTOOL case
VIB 9.497.G VIBTOOL operating instructions
VIB 2.721
Scope of delivery - VIB 2.760 US:
VIB 2.700 EX VIBTOOL instrument incl. rechargeable
battery, intrinsically safe
VIB 2.721 VIBTOOL charger, US version
VIB 2.729 VIBTOOL case
VIB 9.497.G VIBTOOL operating instructions
VIB 2.721

Page 24 www.pruftechnik.com – 11.2014

VIBROTIP / VIBTOOL Chapter 2: VIBTOOL PDA measurement transducer

VIB 6.142RVTSET : Transducer set for VIBTOOL and VIBROTIP EX

TNC
1

2
QLA

VIB 6.142 DEX VIB 3.420 VIB 321926-2

Description
This package contains the hardware components for vi-
bration measurements with VIBTOOL und VIBROTIP EX.

Scope of supply
VIB 6.142 DEX Accelerometer for standard machines, in-
trinsically safe
VIB 3.420 Magnetic holder for curved mounting sur-
faces
VIB 321926-2 Spiral connection cable for CLD-type ac-
celerometer, TNC plug, 2 meters

www.pruftechnik.com – 11.2014 Page 25

 Index by order number

Order no. Page

VIB 2.700 EX.................... 24 VIB 8.618-1,5................... 15
VIB 2.760 EU.................... 24 VIB 8.618-5...................... 15
VIB 2.760 UK.................... 24 VIB 8.619-USB.................. 19
VIB 2.760 US.................... 24 VIB 8.630........................... 8
VIB 4.701-2...................... 14 VIB 8.635........................... 8
VIB 4.701-5...................... 14 VIB 8.650 EX.................... 10
VIB 4.702-2...................... 14 VIB 8.660 VD.................... 12
VIB 4.702-5...................... 14 VIB 8.746-VD................... 18
VIB 4.704-2...................... 14 VIB 8.820........................... 9
VIB 4.704-5...................... 14 VIB 8.820 EX.................... 10
VIB 4.705......................... 17 VIB 8.830......................... 11
VIB 5.955-X...................... 20 VIB 8.840......................... 12
VIB 5.957-2...................... 20 VIB 8.841......................... 13
VIB 5.957-5...................... 20 VIB 8.862................... 11, 20
VIB 6.142RVTSET.............. 25 VIB 8.862-P...................... 20
VIB 8.605......................... 16 VIB 8.863......................... 20
VIB 8.610........................... 8 VIB 321926-2................... 14
VIB 8.617......................... 17
PRÜFTECHNIK
Condition Monitoring
Oskar-Messterstr. 19-21
85737 Ismaning, Germany
www.pruftechnik.com
Tel.: +49 89 99616-0
Fax: +49 89 99616-300
eMail: [email protected]
Printed in Germany LIT.86.700.11.2014.EN
VIBROTIP® , VIBCODE®, OMNITREND® , VIBTOOL®are registered
trademarks of PRÜFTECHNIK Dieter Busch AG. PRÜFTECHNIK prod-
ucts are the subject of patents granted and pending throughout
the world. Contents subject to change without further notice, par-
ticularly in the interest of further technical development. Reproduc-
tion, in any form whatsoever, only upon express written consent of
PRÜFTECHNIK.
© Copyright 2011 by PRÜFTECHNIK AG

Productive maintenance technology