Imaging and Resection

Next Generation in Minimally Invasive Surgical Technology

Helping Surgeons Treat Their
Patients Better™
Since its inception, Arthrex has been committed to one mission: Helping
Surgeons Treat Their Patients Better. We are strategically focused on con-
stant product innovation through scientific research, surgeon collaboration
and medical education to make less invasive surgical procedures simple,
safe and reproducible. Each year, we develop more than 1 000 new innova-
tive products and procedures to advance minimally invasive orthopedics
worldwide.

Arthrex has always remained a privately held company, which allows for
the rapid evaluation of new technologies and ideas, and the freedom to
develop products and techniques that truly make a difference without eco-
nomic considerations or compromise. Our experienced team of dedicated
professionals represents a shared passion and commitment to delivering
uncompromising quality to the health care providers who use our products
and the millions of patients whose lives we impact.

The medical significance of our contributions serves as our primary bench-

mark of success and will continue into the future as the legacy of Arthrex.

Foreword I 03
04
Table of Contents
NanoScope™ Arthroscopy System...................................................... 07

Synergy Image Management............................................................... 15

SynergyResection.......................................................................................... 41

Fluid and Insufflation Management.................................................... 51

Arthroscopic RF System........................................................................ 67

DrillSaw Power™....................................................................................... 75

Table of Contents I 05
NanoScope™ Arthroscopy System

NanoScope™ – The Next Generation Needle Size Arthroscopy System....... 08

NanoScope™ Arthroscopy System............................................................................. 09
NanoScope™ Console............................................................................................. 09
NanoScope™ Handpiece Kit.................................................................................. 09
Nano Arthroscopy Hand Instruments ....................................................................... 10
Nano Arthroscopy Cannulas and Insertion Kit........................................................ 11
Nano Arthroscopy Cannulas ................................................................................. 11
Outflow Cannulas ..................................................................................................... 11
Percutaneous Insertion Kit..................................................................................... 12
Cannula Insertion Recommendations................................................................ 12

NanoScope Arthroscopy System I 07

NanoScope™ – The Next Generation Needle Size
Arthroscopy System

The NanoScope system is a medical-grade, Arthrex helped to pioneer operative arthroscopy and is
all-in-one, needle size arthroscopy system that features once again the pioneer of nano-operative arthroscopy.
a disposable camera with chip-on-tip image sensor Our 2 mm diameter Nano arthroscopy hand instruments
technology. for tissue palpation, resection, extraction, and repair fit
The portable system allows the surgeon to perform through the small Nano cannula with 3.4 mm
minimally invasive arthroscopy during preoperative, outer diameter.
intraoperative, and postoperative phases of care –
with the NanoScope as the main arthroscope or Moreover, the NanoScope system provides a new
as an adjunct to a conventional arthroscope. supplement to MRI imaging, second-look arthroscopy,
and image-guided injections that can be placed
precisely under video image control.

08 I NanoScope Arthroscopy System

NanoScope™ Arthroscopy System

The NanoScope system combines the latest technologies in small imaging sensors, LED lighting, and image
management with an intuitive control unit.

NanoScope™ Console NanoScope™ Handpiece Kit

■■Portable control unit – including documentation ■■Components:

and data management
• NanoScope handpiece
■■13'' touch screen monitor
• 1 sharp obturator
■■Rechargeable battery-powered
• 1 blunt obturator
■■Medical grade device
• 2 inflow cannulas (2.2 mm OD*)
■■Ethernet, USB, and HDMI ports –
• 2 fluid stopcocks
wireless network capabilities
■■Integrated microphone ■■NanoScope handpiece features:

• Single use sterile camera

Product Description Item Number • 1.9 mm scope diameter
NanoScope™ console AR-3200-0030 • 0° direction of view
• 120° field of view
• Integrated LED light source
• Lightweight (55 g) and well balanced

Product Description Item Number

NanoScope™ handpiece kit, single use AR-3210-0040

*OD: Outer diameter

NanoScope Arthroscopy System I 09

Nano Arthroscopy Hand Instruments

Nano Arthroscopy Hand Instrument

(a) (b)

Harnessing 20 years of excellence, Arthrex has

engineered the next generation of instruments for
diagnostic, resection, and extraction procedures. Product Description

NanoBiter, 15° up
The NanoProbe is an articulating, retractable hook
probe used for diagnostic procedures.
The NanoBiter, NanoScissor, and NanoGrasper are
small arthroscopic soft-tissue resection instruments.
Just 2 mm in diameter, they are designed for atraumatic
insertion through tight joint spaces.
Product Description
These instruments are sharp and engineered to
efficiently resect meniscal tissue and other soft-tissue NanoGrasper
structures.

Nano Arthroscopy Hand Instruments, 130 mm Work-

ing Length, 2 mm Diameter, Single Use Sterile Pack
Product Description Item Number
Product Description
NanoBiter, straight (a) AR-10911D-1
NanoBiter, 15° up AR-10922D-1 NanoScissor
NanoGrasper, straight AR-10913D-1
NanoScissor, straight AR-10915D-1
NanoProbe, retractable (b) AR-10100N

Nano Arthroscopy Hand Instruments, 70 mm Work-

ing Length, 2 mm Diameter, Single Use Sterile Pack
Product Description
Product Description Item Number
NanoProbe, retractable
NanoBiter, straight AR-10901D-1
NanoBiter, 15° up AR-10902D-1
NanoGrasper, straight AR-10903D-1
NanoScissor, straight AR-10905D-1

10 I NanoScope Arthroscopy System

Nano Arthroscopy Cannulas and Insertion Kit

Nano Arthroscopy Cannulas

The Nano arthroscopy cannula features a flexible plastic

1.5 cm dam to prevent fluid loss. The cannula is designed to
facilitate the insertion of the NanoProbe and Nano
resection and excision hand instruments as well as
(a)
small-diameter shaver blades.
The included Tegaderm* skin adhesive is placed over
the NanoCannula to maintain cannula position during
3 cm instrument removal.

NanoCannula and Cannulated Obturator,

(b)
2.7 ID** / 3.4 mm OD, Single Use Sterile Pack,
Tegaderm
Product Description Item Number
4 cm
NanoCannula, 1.5 cm length (a) AR-1090C-15-1
NanoCannula, 3 cm length (b) AR-1090C-30-1
(c) NanoCannula, 4 cm length (c) AR-1090C-40-1
NanoCannula, 5 cm length (d) AR-1090C-50-1
NanoCannula, 7 cm length (e) AR-1090C-70-1

5 cm
*Tegaderm is a trademark of 3M Medical.
**ID: Inner diameter
(d)

7 cm

(e)

Outflow Cannulas

The outflow cannula can be inserted through the

NanoCannula for aspiration of fluid and resected soft
(a) tissue. It connects to syringes or suction tubing.
(b)
Outflow Cannula, 2.4 mm OD,
Single Use Sterile Pack
Product Description Item Number

Outflow cannula, 7 cm length (a) AR-1090S-70-1

Outflow cannula, 10 cm length (b) AR-1090S-100-1

NanoScope Arthroscopy System I 11

 Percutaneous Insertion Kit
Spinal
Product Description Item Number
needle stylet
Percutaneous insertion kit for cannula insertion and AR-1090PK-1
measuring the appropriate cannula length (includes
calibrated 17 gauge spinal needle stylet and
Cannulated a 1.1 mm guide wire)
obturator

Cannula Insertion Recommendations

Cannula
1. Insert calibrated needle stylet.
2. Measure appropriate cannula length.
3.  emove stylet and insert guide wire through needle.
R
4. Remove the needle, keeping guide wire in place.
5. Insert cannula and obturator over the
guide wire into the joint space.
6. Remove guide wire and obturator,
Guide wire for direct cannula insertion

keeping cannula in place.

7.  dd Tegaderm transparent film dressing adhesive
A
for hands-free usage, to prevent cannula fallout.

Laser etching
for cannula length

12 I NanoScope Arthroscopy System

NanoScope Arthroscopy System I 13
Synergy Image Management
SynergyUHD4........................................................................................................................ 18
SynergyUHD4 4K Imaging Platform........................................................................ 18
UHD 4K and 1080 p HD Monitors......................................................................... 19
Monitor Covers.......................................................................................................... 19
4K and HD Camera Heads..................................................................................... 19
Synergy Accessories..................................................................................................... 20
Sheathless Arthroscope........................................................................................ 20
Light Guides.............................................................................................................. 20
Arthroscopes and Sheath Systems..................................................................... 21
Laparoscopes........................................................................................................... 24
Bridges........................................................................................................................ 24
Metal Cannula........................................................................................................... 25
Metal Cannula Sets................................................................................................. 26
StarFish™..................................................................................................................... 27
BioOptico................................................................................................................... 27
Synergy Accessories.............................................................................................. 27
Camera Holder......................................................................................................... 28
Articulated Arm for Camera Holder................................................................... 28
Printer and Instrument Tray ........................................................................................ 29
Printer and Recorder............................................................................................... 29
Instrument Tray......................................................................................................... 29
Video Cart......................................................................................................................... 30
Configuration............................................................................................................. 31
Dimensions and Load Capacity............................................................................ 31
Component Parts...................................................................................................... 31
Endo Cart.......................................................................................................................... 32
Configuration............................................................................................................ 33
Dimensions and Load Capacity........................................................................... 33
Component Parts..................................................................................................... 33
Secondary Monitor Stand ........................................................................................... 34
Configuration............................................................................................................ 35
Component Parts..................................................................................................... 35
Secondary Monitor Stand for 55" UHD 4K Monitor.......................................... 36
Configuration............................................................................................................ 37
Component Parts..................................................................................................... 37
Cart for 55" UHD 4K Monitor.................................................................................. 38
Configuration............................................................................................................ 39
Component Parts..................................................................................................... 39

Synergy Image Management I 15

The Synergy system revolutionizes arthroscopic visual- Synergy Tablet Controller
ization systems with a 3-in-1 design.
Our unique and innovative tablet interface allows the
The Synergy system integrates the latest technology user to remotely and efficiently enter patient informa-
in cameras, LED lighting, and image management with tion, surgeon preferences, and image management set-
an intuitive tablet controller. One console and one tings. The tablet can be draped in a cover for use in the
interface simplify use and the ability to accommodate sterile field. Synergy will help reduce cost and OR time
the individual surgeon's preferences, enhancing every and will increase efficiency.
userʼs experience.

Arthrex’s Synergy Surgeon App for iPad allows

physicians to review, edit, annotate and tag stills and
video recordings, as well as create and instantly trans-
mit images and educational postoperative reports to
patients.

16 I Synergy Image Management

 Synergy features the most advanced technology and
provides the highest quality imaging available.
In combination with the Synergy optics line, the Synergy
system provides depth of vision and focus unrivaled in
the industry. Synergy is the revolutionary camera and
imaging management system that is starting a new
trend in operating room video management.

Visualization Image Management System

■■Ergonomic and autoclavable camera head ■■Still capture and video recording

■■Programmable camera head buttons ■■Export to USB, iPad and network locations such as
PACS or network folder
■■Optics with optimized image transmission
■■Network-based system allows live video streaming to
■■Progressive scan technology
any authorized remote viewer
■■Export images to the Synergy Surgeon App for iPad:
LED Light Source
■■Solid state “xenon bright” LED light source
• Review and edit still images and videos
comparable to 300-watt xenon light sources • Annotate on stills
■■Cost-effective with bulb life > 30 000 hours • Create presentations and postoperative
reports for patients
■■ Low heat generation

■■ Automatic brightness adjustment

Synergy Image Management I 17

SynergyUHD4
UHD 4K Video Imaging, High Output LED Light Source and Image Management System
Synergized Into One

SynergyUHD4 4K Imaging Platform

SynergyUHD4 is the first endoscopic 4K camera system SynergyUHD4 Console

on the market. The console integrates 3 devices into 1
Product Description Item Number
and revolutionizes endoscopic visualization and image
SynergyUHD4 console AR-3200-0021
management. The SynergyUHD4 combines the latest
SynergyUHD4 console with matrix encoder AR-3200-0020
technology, true 4K camera heads, LED lighting, image SynergyUHD4 digital documentation tablet AR-3200-1013
management and integration with an intuitive tablet
controller. One console and one unique tablet interface
simplify use. Programmable individual surgeon / proce-
dure preferences enhance the user
experience. The 4K image displayed on the monitor
has 4 times the resolution of standard HD.

18 I Synergy Image Management

 UHD 4K and 1080 p HD Monitors 4K and HD Camera Heads

(b)

(a)

■■UHD 4K medical display and 1080 p HD medical SynergyUHD4 camera heads are available in multiple
display options versions and will provide true 4K or 1080 p HD resolu-
tion. Our 4K camera equates to 4 times the resolution
■■Picture-in-picture and side-by-side display modes
and 64 times the color reproduction compared to HD.
■■Versatile multi-format signal support The picture increases depth perception and creates
more precise color reproduction. The newly designed,
Product Description Item Number smaller heads still carry the industry-leading standard
UHD 4K monitor, 27" 27HJ710S-W auto­clav­able warranty while maintaining a comfort-
UHD 4K monitor, 32" (a) AR-3250-3209 able and ergonomic design. With multiple configura-
UHD 4K monitor, with matrix decoder, 32" AR-3250-3210 tions, the SynergyUHD4 heads are adaptable to multi-
UHD 4K monitor, 55" K930793002
specialty accounts and continue to lead the market in
UHD 4K monitor, with matrix decoder, 55" K9307931
arthroscopy.
HD monitor, 26" AR-3250-2606
HD monitor, 27" 27HK510S
HD monitor, 32" AR-3250-3206 Product Description Item Number

4K Synergy camera head, broadband, autoclavable

UHD4
AR-3210-0029
4K SynergyUHD4 C-mount camera head, broadband, AR-3210-0030
autoclavable (b)
Monitor Covers 4K SynergyUHD4 Ultra camera head, autoclavable AR-3210-0031
4K SynergyUHD4 Ultra C-mount camera head, AR-3210-0032
autoclavable
4K SynergyUHD4 C-mount camera head, 0°, autoclavable AR-3210-0026
4K SynergyUHD4 C-mount, with 6.1 m cable, autoclavable AR-3210-0028
HD SynergyUHD4 camera head, autoclavable AR-3210-0018
HD SynergyUHD4 C-mount camera head, autoclavable AR-3210-0021
HD SynergyUHD4 C-mount camera head, 0°, autoclavable AR-3210-0022
C-mount optical zoom coupler AR-3210-0006
C-mount optical 90° coupler AR-3210-0009

(c)
(d)

Product Description Item Number

Cover for 55" monitor, black 2824

Cover for 32" monitor, black (c) 2823
Cover for 26" / 27" monitor, black 2822
Cover for tablet (d) 2820

Synergy Image Management I 19

Synergy Accessories

Sheathless Arthroscope Light Guides

(b)

(a)

The Arthrex sheathless arthroscope will revolutionize Arthrex’s light guides are made from hundreds of high-
the way arthroscopic procedures are performed. quality fibers. Instead of gluing fibers, we fuse ours at
By eliminating bulky scope sheaths, obturators, the proximal end which maximizes light transmission.
switching sticks, and maintaining fluid inflow through The unique handle increases durability and prevents
operative cannulas, viewing portal changes are quick accidental removal of the light guide. Additionally, our
and efficient. Fluid extravasation due to repeated portal transparent casing makes it easier to better monitor
changes is minimized by maintaining operative cannulas when to replace light guides.
in all portals. The sheathless arthroscope is designed
and constructed with additional structural support along Product Description Item Number
its length to stand up to normal stresses without Light guide cable, blue, 5 mm × 2.7 m (b) AR-3240-5027
a sheath. The sheathless arthroscope will reduce Light guide cable, gray, 5 mm × 2.7 m AR-3240-5028
surgical times by expediting portal changes and Light guide cable, blue, 3.5 mm × 2.7 m AR-3240-3527
eliminating distention loss. Light guide cable, blue, 5 mm × 4 m AR-3240-5040
Light guide cable, gray, 5 mm × 2.7 m, 90° distal end SS9-GYW50W108
Light guide cable, gray, universal, 3.5 mm × 2.7 m AR-3240-3530*
5.2 mm 4K Sheathless Arthroscopes
Product Description Item Number * Requires one of the adapters.
Sheathless 4K arthroscope, 30°, 5.2 mm × 160 mm AR-3350-5430
Sheathless 4K arthroscope, 70°, 5.2 mm × 62 mm AR-3350-5070
Adapters for Universal Light Guide
5 mm 4K Sheathless Arthroscopes Product Description Item Number

Product Description Item Number Wolf adapter AR-3240-3530W

Storz adapter AR-3240-3530S
Sheathless C-mount 4K arthroscope, 30°, AR-3355-5430
Olympus adapter AR-3240-3530O
5 mm × 160 mm
ACMI adapter AR-3240-3530A
Sheathless C-mount 4K arthroscope, 70°, AR-3355-5470
5 mm × 162 mm

4 mm Sheathless Arthroscopes
Product Description Item Number

Sheathless HD arthroscope, 30°, 4 mm × 134 mm (a) AR-3350-5030

Sheathless HD arthroscope, 70°, 4 mm × 138 mm AR-3350-5070

3 mm Sheathless Arthroscopes
Product Description Item Number

Sheathless HD arthroscope, 30°, 3 mm × 115 mm AR-3350-3530

Sheathless HD arthroscope, 70°, 3 mm × 117 mm AR-3350-3570

20 I Synergy Image Management

Arthroscopes and Sheath Systems

(c) (d) (e) (f)

4.8 mm 4K Arthroscopes Sheaths and Obturators for 4 mm Arthroscopes

Product Description Item Number Product Description Item Number

4K arthroscope, 30°, 4.8 mm × 152.5 mm AR-3350-5230 Sheath for 4 mm scopes, single stopcock AR-3372-4001
4K arthroscope, 70°, 4.8 mm × 156 mm AR-3350-5270 Sheath for 4 mm scopes, double stopcock AR-3372-4002
4K C-mount arthroscope, 30°, 4.8 mm × 152.5 mm AR-3355-5230 Conical obturator with handle AR-3375-4011
4K C-mount arthroscope, 70°, 4.8 mm × 156 mm AR-3355-5270 Sharp trocar with handle AR-3375-4012
Conical obturator AR-3375-4017
Switching stick, 4.6 mm × 38 cm AR-3020-07
Sheaths and Obturators for 4.8 mm 4K Arthroscopes High flow sheath for 4 mm scopes, tapered, AR-3373-4001

Product Description Item Number

fenestrated, single stopcock
High flow sheath for 4 mm scopes, tapered, AR-3373-4002
Sheath for 4.8 mm scopes, single stopcock AR-3373-5001 fenestrated, double stopcock (d)
Sheath for 4.8 mm scopes, double stopcock AR-3373-5002 Conical obturator with handle AR-3375-4001
Conical obturator with handle (e) AR-3375-5001 Sharp trocar with handle AR-3375-4002
Sharp trocar with handle AR-3375-5002 Cannulated obturator with handle AR-3375-4003
Cannulated obturator with handle AR-3375-5003 Blunt obturator with handle AR-3375-4004
Conical obturator (f) AR-3375-5007 Conical obturator AR-3375-4007
Switching stick, 4.8 mm × 38 cm AR-3020-05 AR-3020
Switching stick, 4 mm × 23 cm
Switching stick, 4 mm × 31 cm AR-3026
Switching stick, 4 mm × 38 cm AR-3020-01
4 mm 4K Arthroscopes AR-3020-02
Switching stick, 4 mm × 46 cm
Switching stick, cannulated, 4 mm × 38 cm AR-6520-15
Product Description Item Number

4K arthroscope, 30°, 4 mm × 152.5 mm (c) AR-3350-4031 Sheath for 4 mm scopes, fenestrated, single stopcock AR-3374-4001
AR-3350-4071 Sheath for 4 mm scopes, fenestrated, double stopcock AR-3374-4002
4K arthroscope, 70°, 4 mm × 156 mm
AR-3355-4031 Conical obturator with handle AR-3375-4021
4K C-mount arthroscope, 30°, 4 mm × 152.5 mm
AR-3355-4071 Sharp trocar with handle AR-3375-4022
4K C-mount arthroscope, 70°, 4 mm × 156 mm
Conical obturator AR-3375-4027

4 mm Arthroscopes
Inflow/Outflow Sheath for 4 mm Arthroscopes
Product Description Item Number
Product Description Item Number
HD arthroscope, 30°, 4 mm × 152.5 mm, AR-3350-4030R
Inner sheath for inflow/outflow Synergy, AR-3370-4003A
reverse light post
4 mm scope sheath
C-mount HD arthroscope, 0°, 4 mm × 52.5 mm AR-3355-4000 Outer sheath for inflow/outflow Synergy, AR-3370-4003B
C-mount HD arthroscope, 30°, 4 mm × 152.5 mm, AR-3355-4030R
4 mm scope sheath
reverse light post Conical obturator AR-3375-4005

Synergy Image Management I 21

 3 mm Arthroscopes 2.4 mm Arthroscope
Product Description Item Number Product Description Item Number

HD arthroscope, 30°, 3 mm × 138 mm AR-3350-3030 Arthroscope, 30°, 2.4 mm × 72 mm AR-3350-2430

HD arthroscope, 70°, 3 mm × 140 mm AR-3350-3070 Arthroscope, 70°, 2.4 mm × 75 mm AR-3350-2470
C-mount HD arthroscope, 30°, 3 mm × 138 mm AR-3355-3030 C-mount arthroscope, 30°, 2.4 mm × 72 mm AR-3355-2430
C-mount HD arthroscope, 70°, 3 mm × 140 mm AR-3355-3070 C-mount arthroscope, 70°, 2.4 mm × 75 mm AR-3355-2470

Sheaths and Obturators for 3 mm Arthroscopes Sheaths and Obturators for 2.4 mm Arthroscopes
Product Description Item Number Product Description Item Number

Sheath for 3 mm scopes, single stopcock AR-3372-3001 Sheath for 2.4 mm scopes, single stopcock AR-3372-2401
Sheath for 3 mm scopes, double stopcock AR-3372-3002 Sheath for 2.4 mm scopes, double stopcock AR-3372-2402
Conical obturator with handle AR-3375-3001 Conical obturator with handle AR-3375-2401
Sharp trocar with handle AR-3375-3002 Sharp trocar with handle AR-3375-2402
Conical obturator AR-3375-3007 Conical obturator AR-3375-2407
High flow sheath for 3 mm scopes, single stopcock AR-3372-0301
High flow sheath for 3 mm scopes, double stopcock AR-3372-0302
AR-3375-0311 1.9 mm Arthroscope
Conical obturator with handle
Sharp trocar with handle AR-3375-0312 Product Description Item Number
Conical obturator AR-3375-0317
Arthroscope, 30°, 1.9 mm × 58 mm AR-3350-1930
High flow sheath for 3 mm scopes, tapered, AR-3373-0301 C-mount arthroscope, 30˚, 1.9 mm × 58 mm AR-3355-1930
fenestrated, single stopcock
High flow sheath for 3 mm scopes, tapered, AR-3373-0302
fenestrated, double stopcock Sheaths and Obturators for 1.9 mm Arthroscopes
Conical obturator with handle AR-3375-0301
Sharp trocar with handle AR-3375-0302 Product Description Item Number
Conical obturator AR-3375-0307 Sheath for 1.9 mm scope, single stopcock AR-3372-1901
Switching stick, 3 mm × 38 cm AR-3020-08 Sheath for 1.9 mm scope, double stopcock AR-3372-1902
Conical obturator with handle AR-3375-1901
Sharp trocar with handle AR-3375-1902
Inflow/Outflow Sheath for 3 mm Arthroscopes Conical obturator AR-3375-1907

Product Description Item Number

Inner sheath for inflow/outflow Synergy, AR-3370-3003A Centerline™ Arthroscope

3 mm scope sheath
Outer sheath for inflow/outflow Synergy, AR-3370-3003B Product Description Item Number

3 mm scope sheath CenterlineTM carpal tunnel scope, 30°, 2.9 mm AR-3350-2930

Conical obturator AR-3375-3005

2.7 mm Arthroscope
Product Description Item Number

Arthroscope, 30°, 2.7 mm × 72 mm AR-3350-2730

Arthroscope, 70°, 2.7 mm × 75 mm AR-3350-2770
C-mount arthroscope, 30°, 2.7 mm × 72 mm AR-3355-2730
C-mount arthroscope, 70°, 2.7 mm × 75 mm AR-3355-2770

Sheaths and Obturators for 2.7 mm Arthroscopes

Product Description Item Number

Sheath for 2.7 mm scopes, single stopcock AR-3372-2701

Sheath for 2.7 mm scopes, double stopcock AR-3372-2702
Conical obturator with handle AR-3375-2701
Sharp trocar with handle AR-3375-2702
Conical obturator AR-3375-2707
Switching stick, 3.3 mm × 25 cm AR-3020-09

22 I Synergy Image Management

3.5 mm Hip Arthroscopes
Product Description Item Number

Hip arthroscopes, 30°, 3.5 mm × 202 mm AR-3350-4030H

Hip arthroscopes, 70°, 3.5 mm × 204 mm AR-3350-4070H
C-mount hip arthroscope, 30°, 3.5 mm × 202 mm AR-3355-4030H
C-mount hip arthroscope, 70°, 3.5 mm × 204 mm AR-3355-4070H

3.5 mm Hip Sheaths

Product Description Item Number

Sheath for 3.5 mm hip scopes, tapered, fenestrated, AR-3373-4001H

single stopcock
Sheath for 3.5 mm hip scopes, tapered, fenestrated, AR-3373-4002H
double stopcock
Conical obturator with handle AR-3375-4001H
Sharp trocar with handle AR-3375-4002H
Cannulated obturator with handle AR-3375-4003H
Conical obturator AR-3375-4007H
Switching stick, 3.5 mm × 38 cm AR-3020-03
Switching stick, 3.5 mm × 46 cm AR-3020-04
Switching stick, cannulated, 3.5 mm × 38 cm AR-6520-16

Arthroscope Accessories
Product Description Item Number

C-mount wrench AR-3355-0001

Synergy Image Management I 23

 Laparoscopes Bridges

(a) (b) (d)

(c)

■■Maintain portals while moving the arthroscope

3 mm Laparoscopes
■■Connect inflow or outflow tubing
Product Description Item Number

Laparoscope, 0°, 3 mm × 207 mm AR-3351-3000 ■■J-lock type connector

Laparoscope, 30°, 3 mm × 207 mm AR-3351-3030
■■Single and double stopcock options

5.5 mm Laparoscopes
Bridges for 4 mm Arthroscopes
Product Description Item Number
Product Description Item Number
4K laparoscope, 0°, 5.5 mm × 300 mm (a) AR-3351-5500
Bridge for 4 mm scope, single stopcock AR-3380-4001
4K laparoscope, 30°, 5.5 mm × 300 mm AR-3351-5530
Bridge for 4 mm scope, double stopcock (d) AR-3380-4002
4K laparoscope, 45°, 5.5 mm × 302 mm AR-3351-5545
4K laparoscope, extended length, 0°, 5.5 mm × 424 mm AR-3351-5500L
4K laparoscope, extended length, 30°, AR-3351-5530L Bridges for Sealed Cannulas
5.5 mm × 424 mm
4K laparoscope, extended length, 45°, AR-3351-5545L Product Description Item Number
5.5 mm × 425 mm Sealed bridge for 4 mm scope, single stopcock (c) AR-3380-0401
Sealed bridge for 4 mm scope, double stopcock AR-3380-0402

5.5 mm High Magnification Laparoscopes

Bridges for 3 mm Arthroscopes
Product Description Item Number

4K laparoscope, hi-mag, 0°, 5.5 mm × 300 mm AR-3352-5500 Product Description Item Number
4K laparoscope, hi-mag, 30°, 5.5 mm × 300 mm AR-3352-5530 Bridge for 3 mm scope, single stopcock AR-3380-3001
4K laparoscope, hi-mag, 45°, 5.5 mm × 302 mm AR-3352-5545 Bridge for 3 mm scope, double stopcock AR-3380-3002
4K laparoscope, hi-mag, extended length, 0°, AR-3352-5500L
5.5 mm × 424 mm
4K laparoscope, hi-mag, extended length, 30°, AR-3352-5530L Hip Bridges
5.5 mm × 424 mm
Product Description Item Number
4K laparoscope, hi-mag, extended length, 45°, AR-3352-5545L
5.5 mm × 425 mm Bridge for 3.5 mm hip arthroscope, single stopcock AR-3380-4001H
Bridge for 3.5 mm hip arthroscope, double stopcock AR-3380-4002H
Bridge for 3.5 mm hip arthroscope, quick connect, AR-3380-4003H
10 mm Laparoscopes single stopcock
Bridge for 3.5 mm hip arthroscope, quick connect, AR-3380-4004H
Product Description Item Number
double stopcock
4K laparoscope, 0°, 10 mm × 330 mm AR-3351-1000
4K laparoscope, 30°, 10 mm × 330 mm (b) AR-3351-1030
4K laparoscope, 45°, 10 mm × 333 mm AR-3351-1045
4K extended length laparoscope, 0°, 10 mm × 455 mm AR-3351-1000L
4K extended length laparoscope, 30°, 10 mm × 455 mm AR-3351-1030L
4K extended length laparoscope, 45°, 10 mm × 459 mm AR-3351-1045L

24 I Synergy Image Management

 Metal Cannula
Cannulas and Obturators for Sealed Bridges

(a) Product Description Item Number

Cannula, metal, for bridge with dam, 4.5 mm AR-3415-4.5

Cannula, metal, for bridge with dam, 5 mm AR-3415-5.0
Cannula, metal, for bridge with dam (a), 5.5 mm AR-3415-5.5
Accessory, dam for bridge AR-3491-05
Obturator, blunt, for bridge with dam, 4.5 mm AR-3416-4.5
Obturator, blunt, for bridge with dam, 5 mm AR-3416-5.0
Obturator, blunt, for bridge with dam, 5.5 mm AR-3416-5.5

Hip Cannulas and Obturators

Product Description Item Number

Cannula, metal, hip, 4.5 mm AR-3400H-4.5

Cannula, metal, hip, 5 mm AR-3400H-5.0
Cannula, metal, hip, 5.5 mm AR-3400H-5.5
Cannula, metal, hip, 6.5 mm AR-3400H-6.5
Obturator, blunt, hip, 4.5 mm AR-3402H-4.5
Obturator, blunt, hip, 5 mm AR-3402H-5.0
Obturator, blunt, hip, 5.5 mm AR-3402H-5.5
Obturator, blunt, hip, 6.5 mm AR-3402H-6.5

Hip Cannulas and Obturators

for Quick Connect Hip Bridges
Product Description Item Number
■■Reusable metal cannulas Cannula, metal, hip, 4.5 mm AR-3420H-4.5
Cannula, metal, hip, 5 mm AR-3420H-5.0
■■Maintain portals while moving the arthroscope
Cannula, metal, hip, 5.5 mm AR-3420H-5.5
■■Connect inflow or outflow tubing Cannula, metal, hip, 6.5 mm AR-3420H-6.5
Obturator, cannulated, hip, 4.5 mm AR-3421H-4.5
■■Fenestrated and non-fenestrated options Obturator, cannulated, hip, 5 mm AR-3421H-5.0
■■J-lock type connector Obturator, cannulated, hip, 5.5 mm AR-3421H-5.5
Obturator, cannulated, hip, 6.5 mm AR-3421H-6.5
■■Threaded portion can lock into certain shaver blades

■■Sealed and unsealed versions

Synergy Image Management I 25

 Metal Cannula Sets
Cannulas and Obturators

(b) Product Description Item Number

Metal cannula, 3 mm AR-3420-3.0

Metal cannula, 4.5 mm AR-3420-4.5
Metal cannula, 4.75 mm AR-3420-4.75
Metal cannula, 5 mm AR-3420-5.0
Metal cannula, 5.5 mm AR-3420-5.5
Metal cannula, 6.5 mm AR-3420-6.5
Metal cannula, fenestrated, 3 mm AR-3425-3.0
Metal cannula, fenestrated, 4.5 mm AR-3425-4.5
Metal cannula, fenestrated, 4.75 mm AR-3425-4.75
Metal cannula, fenestrated, 5 mm AR-3425-5.0
Metal cannula, fenestrated, 5.5 mm AR-3425-5.5
Metal cannula, fenestrated, 6.5 mm AR-3425-6.5
Blunt obturator, 3 mm AR-3421-3.0
Blunt obturator, 4.5 mm AR-3421-4.5
Blunt obturator, 4.75 mm AR-3421-4.75
Blunt obturator, 5 mm AR-3421-5.0
Blunt obturator, 5.5 mm AR-3421-5.5
Blunt obturator, 6.5 mm AR-3421-6.5
Trocar, 3 mm AR-3422-3.0
Trocar, 4.5 mm AR-3422-4.5
Trocar, 4.75 mm AR-3422-4.75
Trocar, 5 mm AR-3422-5.0
Trocar, 5.5 mm AR-3422-5.5
Trocar, 6.6 mm AR-3422-6.5

(c)
Cannula Sets, Non-Fenestrated (AR-3420-X.XS) (b)
Set Includes Qty. Item Number

Metal cannula 2 AR-3420-X.X

Blunt obturator 1 AR-3421-X.X
Trocar 1 AR-3422-X.X
Inflow cannula adapter 1 AR-3035
Inflow cannula adapter, with stopcock 1 AR-3035L

Cannula Sets, Fenestrated (AR-3425-X.XS) (c)

Set Includes Qty. Item Number

Metal cannula, fenestrated 2 AR-3425-X.X

Blunt obturator 1 AR-3421-X.X
Trocar 1 AR-3422-X.X
Inflow cannula adapter 1 AR-3035
Inflow cannula adapter, with stopcock 1 AR-3035L

X.X = 3/4.5/4.75/5/5.5/6.5

26 I Synergy Image Management

 StarFish™ BioOptico

The StarFish scope attachment connects to the Synergy now optionally includes BioOptico’s
Synergy 4 mm and 3 mm arthroscopes and the 5.5 mm augmented reality algorithms. Information about the
laparo­scopes. The StarFish protrudes proximally light provides additional overlays to the live image
towards the camera head, which allows one-handed which can be useful for research and extended patient
directional changes without the use of the light cord. education. The spectral module utilizes the red, blue,
and green channels of the Synergy system to measure
Product Description Item Number the spectrum of reflected light. The differences in the
StarFish™ scope attachment AR-3370-0006 reflected light are represented with color overlays
StarFish™ C-mount scope attachment AR-3370-0008
on the video screen. The texture module measures
differences in reflected light which is representative of
surface texture. The surface texture is representative
with overlays that highlight differences.

Product Description Item Number

BioOptico spectral mode key kit AR-3200-1026

BioOptico spectral texture mode key kit AR-3200-1027

Synergy Accessories

Product Description Item Number

Secure key – USB 2.0 flash drive 4 GB AR-3200-1010

Secure key – USB 2.0 flash drive 16 GB AR-3200-1012
Synergy system integration cable kit AR-3200-1040
Input/output video signal converter AR-3201-1005
DVI input/output video signal converter 90T0009
SDI input/output video signal converter 90T0011
VGA input/output video signal converter 90T0013
S-Video input/output video signal converter 90T0015
DisplayPort cable, 3 m PI5000-030
Fiber patch cable, 3 m 255413
BNC coaxial cable, 3 m, 75 OHM K8360.3
Matrix license key for SynergyUHD4 console C9826148*

* 2 pcs. needed per console

Synergy Image Management I 27

 Camera Holder Articulated Arm for Camera Holder

(a)

(b)
(c)

The camera head holder allows the surgeon to perform The articulated arm and universal radial clamp allow
open surgical procedures and capture images and / or open surgical procedures to be filmed. The arm is easy
video using the Synergy imaging platform. The camera to position and can be fixed securely and rapidly with
head holder attaches to the TRIMANO support arm. The a single knob. The purely mechanical central tight-
arm can be adjusted to the best viewing position via ening device enables simple and fast positioning of
the release handle. The camera holder also includes a the camera head. Once the position has been set, it
light guide cable holder which can house a light cord to remains firmly fixed throughout the operation. The arm
illuminate the field of view. and radial clamp are fully autoclavable, as is the camera
head holder and TRIMANO adapter.
Product Description Item Number

SynergyUHD4 TRIMANO® camera holder AR-3210-0011 Product Description Item Number

Positioning arm (a) 5870.01-2079

Radial clamp (b) 10-308-25
TRIMANO adapter (c)
®
AR-1641

28 I Synergy Image Management

Printer and Instrument Tray

Printer and Recorder Instrument Tray

(e)

(a)

(b)

Product Description Item Number Product Description Item Number

Sony printer (a) UP-DR80MD Video instrument tray AR-3101C

Color paper roll A4 UPC-R80MD Scope system case AR-3102C
Sony 4K video recorder HVO-4000MT Tray for laparoscopes AR-3103C
Tray for extended length laparoscopes AR-3104C
Mid-sized video instrument case (b) AR-3105C
Tray for camera head AR-3106C
Hip scope instrument case, for scopes AR-3200-30/-70, AR-3200C
sheath AR-3210-02 and obturator AR-3211
Tray for 2 scopes, sheath, obturator, light guide (c) S76248
Tray for laparoscopes (d) S76249
Arthroscope case, for 2 scopes (e) AR-3100
Arthroscope case, extended length, for 2 scopes AR-3130C
Arthroscope case, for 1 scope (f) JF436R

(d) (c)

(f)

Synergy Image Management I 29

Video Cart
Custom Designed and Robust

Arm for tablet (optional)

Articulating monitor arm

(optional)

Integrated power Main switch

column
Earth leakage guard

Pull-out shelf for

arthroscopy pump

Storage shelves
500 mm width

Anti-static castors
with cable guards

Isolating transformer

30 I Synergy Image Management

 Configuration Dimensions and Load Capacity

■■Shockproof powder coating Dimensions: 1 500 mm × 624 mm × 668 mm (H × W × D)

Max load capacity: 180 kg
■■Anti-static castor set with cable guards Ø 125 mm
Max load capacity shelf: 30 kg
■■Detachable cable guards Max load capacity extendable shelf: 20 kg
■■4 lockable castors
Product Description Item Number
■■Isolating transformer 2 000 VA with earth
ArthroCart AR-5995-16STI
leakage guard
■■5 storage shelves
Component Parts
■■1 extendable storage shelf approx. 150 mm

■■1 storage shelf with handle Product Description Item Number

Central monitor mount KU.1657.991

■■Drawer
Articulating arm for 26" monitors KU.0530.903
■■Mounting position for central monitor mount Articulating arm for 32" monitors KU.1996.903
Side-mount arm for 32" monitors, left KU.3936.903*
■■Mounting position for articulation monitor arm Side-mount arm for 32" monitors, right KU.3937.903*
Arm for tablet KU.1534.800
■■Mounting position for tablet arm
Camera head-cup holder (a) ZV.9199.800
■■Cable winding aid Gas bottle holder 3-10 l GW.0160.991
Gas bottle holder 20-50 l GW.0285.991
■■Foot pedal holder
Power cord EU-style (Schuko), 5 m KU.2972.799
■■Camera holder Power cord EU-style (Schuko), with equipotential ZV.9663.999
bonding cord, 5 m
■■Fluid bag holder Power cord EU-style (Schuko), orange, 5 m ZV.9778.799
Power cord DK, 5 m KU.2967.799
■■Tubing clamp Power cord DK, hospital grade, 5 m KU.2968.799
■■Power column with 10x power cables and Power cord UK, with equipotential bonding cord, 5 m KU.2969.799
Power cord UK, 5 m ZV.9860.799
equipotential bonding cables
Power cord CH, with equipotential bonding cord, 5 m KU.2970.799
Power cord CH, 5 m KU.2971.799
Power cord IT, 5 m ZV.9507.799

* must only be used in combination

(a)

Synergy Image Management I 31

Endo Cart

32 I Synergy Image Management

 Configuration

■■Shockproof powder-coating

■■Anti-static castor set with cable guards Ø 125 mm

■■Detachable cable guards

■■4 lockable castors

■■Isolating transformer 1 200 VA

■■Central I/O switch

■■Power column with 6x IEC outlets

■■Plate with 6x equipotential bonding connectors

■■3 storage shelves, max. load 10 kg

■■Drawer

■■Positioning handle

■■Monitor mount: VESA 75/100

■■Tablet arm

■■Cable winding aid

■■Camera holder

■■4x IEC cords included

■■4x equipotential bonding cords included

Dimensions and Load Capacity Component Parts

■■Total width: 649 mm Product Description Item Number

■■Total depth: 620 mm Gas bottle holder 3 - 10 l GW.0160.991

Camera head-cup holder ZV.9199.800
■■Total height: 1 762 mm

■■Weight: approx. 75 kg Product Description Item Number

■■Dimension shelves WxD: 424 mm × 430 mm Power cord EU-style (Schuko), 5 m KU.2972.799
Power cord EU-style (Schuko), with equipotential ZV.9663.999
■■Max load capacity shelf: 10 kg bonding cord, 5 m
Power cord EU-style (Schuko), orange, 5 m ZV.9778.799
■■Max load capacity VESA mount: 18 kg
Power cord DK, 5 m KU.2967.799
Power cord DK, hospital grade, 5 m KU.2968.799
Power cord UK, with equipotential bonding cord, 5 m KU.2969.799
Product Description Item Number Power cord UK, 5 m ZV.9860.799
Pro-cart Endo KU.5875.800 Power cord CH, with equipotential bonding cord, 5 m KU.2970.799
Power cord CH, 5 m KU.2971.799
Power cord IT, 5 m ZV.9507.799

Synergy Image Management I 33

Secondary Monitor Stand

34 I Synergy Image Management

 Configuration

■■Small footprint

■■Height adjustable

■■Suitable for 24", 26", and 32" monitors

■■4 lockable anti-static castors

■■Handle

■■Cable winding aid

Product Description Item Number

Secondary monitor stand AR-5995-02M

Component Parts

Product Description Item Number

Shelf for the monitor trolley NT.4100.991

Drawer for monitor trolley NT.4104.903
Basket, 205 mm ZV.9967.800
Basket, 93 mm ZV.9892.991
Mount for Synergy tablet KU.3003.003
Power cord EU-style (Schuko), 5 m KU.2972.799
Power cord EU-style (Schuko), with equipotential ZV.9663.999
bonding cord, 5 m
Power cord EU-style (Schuko), orange, 5 m ZV.9778.799
Power cord DK, 5 m KU.2967.799
Power cord DK, hospital grade, 5 m KU.2968.799
Power cord UK, with equipotential bonding cord, 5 m KU.2969.799
Power cord UK, 5 m ZV.9860.799
Power cord CH, with equipotential bonding cord, 5 m KU.2970.799
Power cord CH, 5 m KU.2971.799
Power cord IT, 5 m ZV.9507.799

Synergy Image Management I 35

Secondary Monitor Stand for 55" UHD 4K Monitor

36 I Synergy Image Management

 Configuration

■■Anti-static castor set with cable guards Ø 125 mm

■■4 castors, lockable

■■Isolating transformer: 1 200 VA – 115 V/230 V

■■Central on/off switch

■■Handle on rear side

■■Cable winding aid

■■Power column with 6x IEC outlets and 6x equipoten-

tial bonding connectors

Product Description Item Number

Monitor cart for 55" monitor KU.5406.903

Monitor mount for 55" monitor, VESA 600 / 200 KU.5309.903

Component Parts

Product Description Item Number

Power cord EU-style (Schuko), 5 m KU.2972.799

Power cord EU-style (Schuko), with equipotential ZV.9663.999
bonding cord, 5 m
Power cord EU-style (Schuko), orange, 5 m ZV.9778.799
Power cord DK, 5 m KU.2967.799
Power cord DK, hospital grade, 5 m KU.2968.799
Power cord UK, with equipotential bonding cord, 5 m KU.2969.799
Power cord UK, 5 m ZV.9860.799
Power cord CH, with equipotential bonding cord, 5 m KU.2970.799
Power cord CH, 5 m KU.2971.799
Power cord IT, 5 m ZV.9507.799

Synergy Image Management I 37

Cart for 55" UHD 4K Monitor

38 I Synergy Image Management

 Configuration

■■Anti-static castor set with cable guards Ø 125 mm

■■4 castors, lockable

■■Isolating transformer: 2 000 VA – 230 V

■■Earth leakage guard

■■Central on/off switch

■■Total of 4 storage shelves

■■1 extendable storage shelf approx. 150 mm

■■3-sided surrounding handle

■■Positioning handles on rear side

■■Drawer

■■Monitor mount inclinable for 55" monitor with handle

■■Power column with 8x IEC outlets and equipotential

bonding connectors
■■5x IEC cords included

■■5x equipotential bonding cords included

■■Cable winding aid

■■Foot pedal holder

■■Fluid bag holder

Product Description Item Number

Compact cart for 55" monitor KU.5756.800

Component Parts

Product Description Item Number

Arm for tablet KU.1534.800

Side mount plate for tablet arm KU.2788.991
IEC extension cord, 1 m ZV.9960.799
Equipotential bonding cord, 1 m ZV.9943.999
Gas bottle holder 3 - 10 l GW.0160.991
Gas bottle holder 20 - 50 l GW.0285.991
Camera head-cup holder ZV.9199.800
Power cord EU-style (Schuko), 5 m KU.2972.799
Power cord EU-style (Schuko), with equipotential ZV.9663.999
bonding cord, 5 m
Power cord EU-style (Schuko), orange, 5 m ZV.9778.799
Power cord DK, 5 m KU.2967.799
Power cord DK, hospital grade, 5 m KU.2968.799
Power cord UK, with equipotential bonding cord, 5 m KU.2969.799
Power cord UK, 5 m ZV.9860.799
Power cord CH, with equipotential bonding cord, 5 m KU.2970.799
Power cord CH, 5 m KU.2971.799
Power cord IT, 5 m ZV.9507.799

Synergy Image Management I 39

 Synergy Resection
Not Just Another Shaver System

SynergyResection Console.......................................................................................... 42
Handpieces................................................................................................................ 43
Replacement Suction Valves for All Handpieces........................................... 43
Footswitch.................................................................................................................. 43
Shaver Blades and Burrs....................................................................................... 44
Shaver Blades and Burrs for Small Joint Handpiece AR-8330SJ............. 47
Retractable Hood Burrs......................................................................................... 48
ShaverDrill™ Instruments........................................................................................ 49

Synergy Resection I 41
 SynergyResection Console

Arthrex’s shaver, SynergyResection, is a versatile system for

multiple orthopedic procedures.

The multi-functional shaver console can be used with

2 handpieces simultaneously. Operating with 2 hand-
pieces decreases time-consuming blade changes.
Users can also utilize 1 or 2 foot pedals. There are
3 oscillating modes depending on the surgeon's
preference: standard, efficient, or aggressive.

The Arthrex unique double-sealed handpiece is the

most reliable in the industry with a light, ergonomic
feel and a touch control option. With high-performance
motors and the use of cutting-edge materials,
SynergyResection handpieces are a great addition to the OR.

This versatile system was designed for multiple ortho- ■■Multi-functional shaver system
pedic procedures, featuring multiple, user-selected
■■Operation of 2 handpieces simultaneously
oscillation modes and dual channels which allow for a
variety of handpiece operation modes. Both channels ■■Automatic detection of handpiece
can be operated individually with a single footswitch or ■■Control via 1 or 2 foot pedals
simultaneously with the use of a second footswitch.
■■3 different oscillating modes: standard, efficient,
aggressive
■■Shaver: FWD/REV: 8 000 rpm max.
OSC: 3 000 rpm max.

Product Description Item Number

SynergyResection console AR-8305

42 I Synergy Resection
Handpieces

Product Description Item Number

Shaver handpiece (a) AR-8330F

Shaver handpiece, hand control (b) AR-8332H
(a) Shaver handpiece, hand control, backhand (c) AR-8332RH
Shaver handpiece, small joint (d) AR-8330SJ

(b)

Replacement Suction Valves for All Handpieces

All active Arthrex shaver handpieces feature removable

valves for the highest level of cleanliness. Replacement
(c)
valve assemblies complete with O-ring seal can be pur-
chased if one is ever lost or damaged.

Product Description Item Number

(d) Replacement valve assembly for AR-8332H/RH, AR-8330V

AR-8330F/H/RH handpieces
Replacement O-rings for AR-8330V valve assembly AR-8330VO
(pack of 10)
Replacement valve assembly for AR-8330SJ handpiece AR-8330SJV
Replacement O-rings for AR-8330SJV valve assembly AR-8330SJO
(pack of 10)

Footswitch

Product Description Item Number

Low profile footswitch (e) AR-8310

Footswitch for shaver and pump (f) AR-8310SP
Corded gas pedal footswitch (g) AR-8315C
SynergyResection wireless footswitch (h) AR-8315W

(e)

(f)

(g)

(h)

Synergy Resection I 43
 Shaver Blades and Burrs

2 3 3.5 3.8 4 4.2 5 5.5

Description (Ø in mm) (Ø in mm) (Ø in mm) (Ø in mm) (Ø in mm) (Ø in mm) (Ø in mm) (Ø in mm)

Least aggressive
Slotted Whisker
Ideally suited for
non-aggressive resection AR-8380SW
of articular cartilage, fatty
tissue, and synovium

Sabre
Designed for more
aggressive general AR-8400SR
AR-7200SR AR-7300SR
soft tissue resection AR-8380SR AR-8400CSR AR-8500SR AR-8550SR
(Small joint) (Small joint)
applications, while (Curved)
leaving smooth tissue
edges
Double Cut
Ideal blade for efficient AR-8400DC
general soft tissue
AR-8380DC AR-8400CDC AR-8550DC
resection and fine
(Curved)
sculpting of articular
cartilage

Dissector
Best choice for AR-8350DS AR-8400DS
AR-7300DS AR-6420DS1)
aggressive resection AR-8350CDS AR-8380DS AR-8400CDS AR-8500DS AR-8550DS
(Small joint) AR-6420CDS2)
of meniscus, synovium, (Curved) (Curved)
cartilage, and plica

AR-7400TD
Torpedo™
Blade with an ovoid outer (Small joint)
AR-7350TD AR-6420TD1)
window and a smooth AR-8400TD AR-8500TD
(Small joint) AR-6420CTD2)
cutting edge, ideal for AR-8400CTD
meniscectomies
(Curved)

Bone Cutter
Designed for aggressive
general tissue AR-8400BC
AR-6420BC1)
debridement when run in AR-8380BC AR-8400CBC AR-8500BC AR-8550BC
AR-6420CBC2)
oscillate mode and bone (Curved)
when run in the forward
direction

SabreTooth
Aggressive, all purpose AR-8400ST
blade ideally suited for AR-8350ST AR-8380ST AR-8400CST AR-6420CST2) AR-8500ST AR-8550ST
extensive soft tissue (Curved)
debridement
Most aggressive

Excalibur AR-8400EX
Most aggressive option AR-6420EX1)
AR-8380EX AR-8400CEX AR-8500EX AR-8550EX
designed for extensive AR-6420CEX2)
(Curved)
soft tissue debridement

1) Hip length
2) Hip length, curved

44 I Synergy Resection
 Shaver Blades and Burrs

3 4 4.5 5 5.5
Description (Ø in mm) (Ø in mm) (Ø in mm) (Ø in mm) (Ø in mm)

BLURR®
6-flute

The BLURR is a useful device that

aggressively resects both bone and AR-8500BL
soft tissue. It is particularly useful for
acromioplasties and notchplasties
6-flute
8-flute
12-flute

ClearCut™ Oval Burrs AR-8500COS

AR-8550COE
Maximum visibility while resecting bone AR-8500COE
AR-8550COT
during notchplasties and acromioplasties AR-8500COT
8-flute

ClearCut™ Round Burrs

Maximum visibility during osteochondral and AR-8400CRE AR-8500CRE AR-8550CRE
osteophyte resection or bony site preparation
6-flute

ClearCut™ TR Burrs
Angled clear shroud provides additional
soft tissue retraction and maximum visibility AR-8400CTS
during osteochondral and osteophyte
resection and bony site preparation
6-Flute

ClearCut™ SLAP Burrs

Maximum visibility and soft tissue protection
AR-8400CSS
during glenoid preparations in SLAP lesion
repairs of the labrum
6-flute
8-flute
12-flute

FlushCut™ Oval Burrs AR-8500FOS AR-8550FOS

Excellent for rapid, aggressive bone resection
AR-8500FOE AR-8550FOE
in notchplasty, distal clavicle and subacromial
AR-8500FOT AR-8550FOT
decompression procedures
8-flute
10-flute
12-flute

Oval Burrs AR-7300OBT

Designed for rapid, aggressive bone AR-8400OBE AR-8500OBE AR-8550OBT
(Small joint,
resection in notchplasty, distal clavicle and (8-flute) (8-flute) (12-flute)
10-flute)
subacromial decompression procedures
8-flute

Round Burrs AR-8400RBE AR-8500RBE

Ideally suited for soft tissue, osteochondral AR-7300RBE
AR-6400RBE AR-6500RBE1) AR-8550RBE
and osteophyte resection or bony site (Small joint)
(Hip length) AR-6500VBE2)
preparation
12-flute

Tapered Burrs
Excellent burr for distal clavicle resection
AR-8500TBT
and for shaping bone and cartilage during
notchplasty and acromioplasty procedures

Hoodless Sheath, O/T Burrs AR-8500HSO AR-8550HSO

Allows for bone resection without a hood AR-8400HSO
(Oval/ (Oval/
surrounding the burr head, while improving (Oval burr)
tapered burr) tapered burr)
visibility and access into tight spaces

1) Hip length
2) Hip length, concave

Synergy Resection I 45
 Shaver Blades and Burrs

4 6
Description
(Drill depth in mm) (Drill depth in mm)

AR-8150PP-30
PowerPick™
(30°)
Initially designed to make quick work of microfracture procedures by using the shaver AR-8150PX-45
handpiece to power the Ø 1.5 mm trocar tip. The 30° and 45° angled shafts facilitate (45°)
AR-8150PP-45
use in a variety of other applications, including ACL femoral tunnel location.
(45°)

3.5 4 5.5
Description
(Width in mm) (Width in mm) (Width in mm)

AR-8350PR AR-8400PR AR-8550PR

PoweRasp™
Perfect for arthroscopic bone debridement by PP
PP
PP PP
PP
PP PP
PP
PP
reciprocating motion, creating a smooth and flat surface, PP
PP
PP
PP
PP
PP PP
PP
PP
e.g., subacromial decompressions, notchplasties.
PP
PP
PP PP
PP
PP
PP
PP
PP

46 I Synergy Resection
Shaver Blades and Burrs for Small Joint Handpiece AR-8330SJ
1 2 3 3.5
Description
(Ø in mm) (Ø in mm) (Ø in mm) (Ø in mm)

Sabre, Small Hub

Sharp, teardrop-shaped outer window. The smooth inner
AR-9200SR AR-9300SR AR-9350SR
cutting window leaves crisp, clean edges for a more
anatomic appearance following resection.

Dissector, Small Hub

Sharp, teardrop-shaped outer window. The toothed inner
AR-9300DS AR-9350DS
cutting window aggressively attacks tissue, grabbing it
and drawing it into the cutting area.
10-flute

Oval Burr, Small Hub

Designed for rapid, aggressive bone resection
AR-9300OBT AR-9350OBT
in notchplasty, distal clavicle, and subacromial
decompression procedures.
10-flute

Round Burr, Small Hub

Ideally suited for soft tissue, osteochondral and AR-9300RBT AR-9350RBT
osteophyte resection, or bony site preparation.

PoweRasp™ Resector, Small Hub

Ideally suited for soft tissue, osteochondral and AR-9350PR
osteophyte resection, or bony site preparation.

AR-9100PP-00
(0°)
PowerPick™ Drill, Small Hub
Excellent for micro-drilling subchondral bone defects.
AR-9100PP-45
(45°)

Torpedo™ Shaver Blade

Tapered tip and scissor-like cutting action facilitate rapid, AR-9350TD
aggressive soft tissue resection.

Synergy Resection I 47
 Retractable Hood Burrs

4 5 5.5
Description
(Ø in mm) (Ø in mm) (Ø in mm)

FlushCut™ Oval Burrs

8-flute

Allows the benefit of using the shaft as a cutting depth

guide during procedures where a flat surface is desired,
such as in an acromioplasty. By using the shaft as a depth AR-8500RFOE AR-8550RFOE
stop and keeping the position parallel to the surface
during use, the ideal acromioplasty can be completed
quickly.

Hip-Length Round Burrs

8-flute

Acetabular preparations can be made with the hood

in place to protect the labrum and surrounding tissues
when performing a hip labral repair procedure, and when AR-6400RRBE AR-6500RRBE AR-6550RRBE
necessary, the hood can be retracted to allow full burr
head exposure to address other hip pathology, such as a
CAM lesion.

48 I Synergy Resection
 ShaverDrill™ Instruments

ShaverDrill instruments quickly attach directly to our large hub shaver handpieces and are used to pre-drill pilot
holes for a variety of anchors. Because you don’t need to open a battery-powered drill tray, ShaverDrill instruments
may help to extend battery life, reduce intraoperative setup time, and lower cleaning and processing costs between
cases.

Description Item Number

ShaverDrill™ instrument for 1.6 mm FiberTak® anchors AR-3600NDSR-1

ShaverDrill™ instrument for 2.4 mm PushLock® anchors AR-2922DSR-24

ShaverDrill™ instrument for 2.4 mm PushLock® anchors, hard bone AR-2922DTSR-24

ShaverDrill™ instrument for short 2.9 mm PushLock® anchors AR-2923DSR

ShaverDrill™ kit for short 2.9 mm PushLock® anchors AR-2923DSSK

ShaverDrill™ kit for short 2.9 mm PushLock® anchors, hard bone AR-2923DTSK

ShaverDrill™ instrument for short 2.9 mm PushLock® anchors, hard bone AR-2923DTSR

ShaverDrill™ instrument for 3 mm SutureTak® anchors AR-1250LTSR

ShaverDrill™ kit for 3 mm SutureTak® anchors AR-1934DSSK

ShaverDrill™ instrument for 3 mm SutureTak® anchors, hard bone, and knotless SutureTak® anchors AR-1938DSR

ShaverDrill™ kit for 3 mm SutureTak® anchors, hard bone, and 3 mm knotless SutureTak® anchors AR-1938DSSK

Synergy Resection I 49
Fluid and Insufflation Management
Flexibility and Versatility

Arthroscopy Pumps........................................................................................................ 52
DualWave™ Arthroscopy Pump............................................................................ 52
Continuous Wave™ 4 Arthroscopy Pump and Accessories......................... 53
Tubing for Continuous Wave™ and DualWave™ Pump................................... 54
Tubing for DualWave™ Pump................................................................................ 54
Accessories............................................................................................................... 55
Pump Cart......................................................................................................................... 56
SynergyInsufflation................................................................................................................. 57
SynergyInsufflation Console......................................................................................... 57
SynergyInsufflation Accessories.................................................................................. 58
Gas Connectors....................................................................................................... 59
Laparoscopy Pump......................................................................................................... 60
Laparoscopic Pump Accessories......................................................................... 61
Disposable Anti-Fatigue Mats ................................................................................... 62
The EcoSuctioner®................................................................................................... 62
The SuctionBlu™ Mat............................................................................................... 62
The Suctioner®........................................................................................................... 63
Surgical Mats............................................................................................................. 63
Safe, Economical, and Efficient Fluid Management............................................. 64
EcoDri-Safe™ Absorbent Rolls.............................................................................. 64
Dri-Safe® Absorbent Pads..................................................................................... 64
Fluid Diamond........................................................................................................... 65
ArthroVac™................................................................................................................. 65

Fluid and Insufflation Management I 51

Arthroscopy Pumps

DualWave™ Arthroscopy Pump

The DualWave is an integrated inflow and outflow fluid Flexibility is key with touch panel access and the choice
management system that may also be used as a simple of a foot pedal or an autoclavable remote control that
inflow-only arthroscopy pump. The DualWave can solve allows the user to control the DualWave from the sterile
any fluid management need, whether it is controlling field. The RINSE and LAVAGE modes allow the user to
distention during complex arthroscopic procedures or control all aspects of fluid management at the touch of
helping a facility with a desire to increase cost contain- a button. The LAVAGE mode provides a timed cycle of
ment capabilities. increased pressure to help maintain proper visualiza-
tion and the RINSE mode increases the fluid passing
Clear, consistent, turbulent-free visualization is achieved through the joint space, without affecting the pressure.
with the DualWave through Arthrex’s latest proprietary When operating in inflow-only and inflow and outflow
design, which precisely and independently controls mode, the SHAVERBOOST mode function automatically
the shaver or cannula outflow to maintain optimal joint compensates for the loss of distention that can occur
distention and clarity. when shaver suction is introduced into the joint space
by increasing the pressure while the shaver is active.
The touch panel video display gives real-time pressure To help control costs, the DualWave arthroscopy pump
and flow readings and allows the user to track the total can utilize Arthrex’s 2-piece tubing option to dramati-
fluid used during a case and the total operating time at cally lower the tubing and fluid cost per patient, while
the end of a procedure. User-programmable defaults reducing room turnover times.
encompass pressure presets (by joint space), outflow
rate and shaver suction levels, giving the surgeon a Product Description Item Number
consistent, repeatable operating experience. DualWave™ arthroscopy pump AR-6480

52 I Fluid and Insufflation Management

 Continuous Wave™ 4 Arthroscopy Pump and Accessories

Arthrex offers a clear vision of the future with the The touch panel video display gives real-time pressure
Continuous Wave 4 arthroscopy pump. The Continu- and flow readings, displays the total fluid used during a
ous Wave 4, now with a Synergy heads-up display and case, as well as the total run time at the end of a proce-
direct communication with the Synergy resection sys- dure. Flexibility is key with touch panel access and the
tem, is a fully integrated inflow-only arthroscopy pump. choice of a foot pedal or autoclavable remote control
device that allows the user the ability to control the
Clear, consistent, turbulent-free visualization is achieved Continuous Wave 4 from the sterile field.
through Arthrex’s latest proprietary design which pre-
cisely maintains optimal joint distention and clarity. User-selected defaults encompass pressure settings
(by joint space), flow rate, and shaver boost levels. The
lavage mode allows the user to control pressure at the
touch of a button. The addition of shaver detection
provides an optional boost of pressure when the shaver
is activated.

Product Description Item Number

Continuous Wave™ 4 arthroscopy pump AR-6485

Fluid and Insufflation Management I 53

 Tubing for Continuous Wave™ and DualWave™ Pump

Main Pump Tubing

Product Description and Note Item Number

Main Pump Tubing for AR-6480 or AR-6475, Sterile, Qty. 10

This tubing set is for those who prefer a complete tubing set and want
to replace the fluid bags after each case. Each tubing set comes with an AR-6415
independently packaged press-fit Luer lock to allow for tubing length AR-6415CL
adjustment if used in conjunction with the extension tubing. If used
alone, the set must be discarded after each case.

Extension Tubing
Product Description and Note Item Number

Extension Tubing, Sterile, Qty. 20

This unique tubing provides an economical option to reduce tubing costs
by allowing the main pump tubing to remain in use for the entire surgical
AR-6220
day. The exclusive backflow valve prevents contaminated fluid from
reaching the main pump tubing. The main pump tubing and fluid bags no
longer need to be discarded after each surgical case.

2-Piece Pump Tubing System

Product Description and Note Item Number

2-Piece Pump Tubing With Connector for AR-6480 or AR-6475,

Sterile, Qty. 10
The 2-piece pump tubing maintains sterility due to the design of the AR-6420
patient-side tubing and the touch-proof connector. Leaving the pump AR-6420CL
side tubing in place the entire day saves on fluid by not requiring the
remaining fluid to be discarded after terminating each surgical case.

2-Piece Patient Tubing, Sterile, Qty. 20

The 2-piece patient tubing set contains a backflow restrictor; saving
tubing costs and setup time by only requiring patient tubing to be AR-6425
discarded and passed off from the sterile field after and before each
case.

Tubing for DualWave™ Pump

DualWave™ Pump Tubing

Product Description and Note Item Number

DualWave™ Outflow Tubing for AR-6480, Qty. 10

The DualWave outflow tubing allows the DualWave arthroscopy pump
to regulate both inflow and outflow in the joint space. By controlling AR-6430
both aspects, distention is maintained at the highest level, resulting in
maximum visualization.

54 I Fluid and Insufflation Management

Accessories

Product Description and Note Item Number

Waste Collection Bag, Qty. 10

The waste collection bag can be hung from the AR-6481 pump cart and
AR-6431
can hold up to 10 liters of waste fluid. At the end of a surgical case,
simply seal the bag and dispose.

Y-Tubing Adapter, Double Spike, 2 per Set, Sterile, Qty. 10

The optional Y-tubing adapter allows 4 fluid bags to be connected to
AR-6215
either the main pump tubing or the 2-piece pump tubing, resulting in
fewer fluid bag changes.

Arthroscopic Gravity Tubing

Arthroscopic gravity tubing is compatible with all arthroscopic sheaths
and cannulas and able to maintain proper distention even in complicated AR-6412
surgical cases that demand high flow. AR-6414

2 versions: 2-and 4-spike

AR-6412 AR-6414

Autoclavable Remotes
Product Description and Note Item Number

DualWave™ Autoclavable Remote

Autoclavable DualWave remote control provides finger-touch access to
AR-6482
pressure adjustment, LAVAGE and RINSE modes, shaver suction levels,
and the RUN/STOP button.

Footswitches
Product Description and Note Item Number

DualWave™ Footswitch
DualWave footswitch allows the user to control both pressure and flow AR-6483
levels with the LAVAGE and RINSE pedals.

Footswitch for Shaver and Pump AR-8310SP

Cannulas
Product Description and Note Item Number

Flexible Cannula, 2.5 mm × 103 mm With Obturator AR-3420.2.5

(a) Flexible Cannula, 4.5 mm × 75 mm (a) AR-6525

(b) Valve for Cannula (b) AR-6501
Trocar for Cannula AR-6502
Obturator for Cannula (c) AR-6503
(c)

Fluid and Insufflation Management I 55

Pump Cart

For DualWave and

Continuous Wave

Foot pedal hanger

Foot pedal storage

The DualWave arthroscopy pump cart provides easy

installation of the DualWave or the Continuous Wave
pumps at their proper heights during surgery.
The mobile cart can be configured for storage of fluid
bags, shaver blades and/or foot pedals for easy rotation
between operating rooms.

Product Description Item Number

DualWave™ cart AR-6481

56 I Fluid and Insufflation Management

SynergyInsufflation
High Flow With Optimal Control

SynergyInsufflation Console

SynergyInsufflation is a technologically sophisticated yet

Product Description Item Number
simple device used for diagnostic and therapeutic
SynergyInsufflation AR-3290-0004
endoscopic procedures to distend the peritoneal cavity
by filling it with gas. The device has a volumetric flow
rate of up to 50 l to quickly fill the abdomen. The intui-
tive touchscreen interface allows for quick and easy
adjustment to the system. Pressure and volumetric flow
rate can be adjusted based on preference between
high flow and bariatric mode. A built-in heating element
gives surgeons the ability to heat the gas prior to enter-
ing the patient. Using our Synergy video management
system, the heads-up display feature allows for easy
visibility of system settings on the monitor. The system
features a venting system and contamination alarm.

Fluid and Insufflation Management I 57

 SynergyInsufflation Accessories

Consumables
Product Description Item Number

Insufflation tube set, ISO connector, disposable, qty. 10 AR-3290-1001

Tube set ISO connector, reusable 20x, autoclavable AR-3290-1002

Disposable heated tube set, qty. 10 AR-3290-1007

Heated tube set, reusable 100x, autoclavable AR-3290-1008

Insufflation tube set, thin, ISO connector, disposable, sterile, qty. 20 Z0293

Filter for insufflation, single use, sterile, qty. 50 4222/701

Adapter for ISO/corrugated connector (barbed connector) Z0164-01

58 I Fluid and Insufflation Management

Gas Connectors
Product Description Item Number

Universal gas supply connector CO2, straight

Z5078-01
(included in AR-3290-0004)

Universal gas supply connector CO2, angled Z5077-01

US adapter for universal gas supply connector

Z5073-01
(included in AR-3290-0004)

NIST adapter for universal gas supply connector Z5074-01

DISS adapter for universal gas supply connector Z5075-01

Sinter filter for universal gas connection, qty. 5 Z5072-01

Switch valve for connecting 2 bottles Z0531-00

High Pressure Hoses

Product Description Item Number Device: US/central gas supply: AGA, length 3 m Z5106-01
Device: US/bottle: DIN, length 1.5 m Z5044-01 Device: US/central gas supply: AGA, length 5 m Z5107-01

Device: US/bottle: ISO, length 1.5 m Z5045-01 Device: DISS/central gas supply: DISS, length 0.9 m Z5048-01
Device: DISS/central gas supply: DISS, length 3 m Z5108-01
Device: US/bottle: PIN INDEX, length 1.5 m Z0499-01
Device: US/central gas supply: DIN, length 3 m Z5100-01
Device: US/central gas supply: DIN, length 5 m Z5101-01
Device: US/central gas supply: NF (FRENCH), length 3 m Z5102-01
Device: US/central gas supply: NF (FRENCH), length 5 m Z5103-01
Device: US/central gas supply: UNI (ITALIAN), Z5104-01
length 3 m
Device: US/central gas supply: UNI (ITALIAN), Z5105-01
length 5 m

Fluid and Insufflation Management I 59

Laparoscopy Pump

One Device, Two Functions, Many Advantages Made for Easy Handling
It’s powerful, it’s smart, it’s convenient. With a built-in The well-being of patients and the optimal work envi-
vacuum pump, the laparoscopic pump combines irriga- ronment for the clinical staff are in the foreground in the
tion and suction functionality in one device – which operating room. Equipment must be 100 percent reli-
makes it the device of choice for minimally invasive sur- able and a pump should be easy to set up and use. The
geries. A suction and irrigation volume of 2 l/min and a laparoscopic pump is unbeatable in these respects. Its
pressure performance of up to 450 mmHg when irrigat- contemporary design is reduced to the essentials and
ing creates clear view during the operation. The pump the tube sets can be inserted with one hand in three
reacts to our RFID-protected tube sets and ensures simple steps.
proper use. If used improperly, the pump automatically
locks and irrigation is not possible. Product Description Item Number

Laparoscopic suction/irrigation pump PP110 2205288

Can be mounted
on a pole

60 I Fluid and Insufflation Management

 Laparoscopic Pump Accessories

Irrigation

Product Description Item Number

Tube set for irrigation, disposable, qty. 10 T0505-01

Tube set for irrigation, reusable, 20 x T0506-01

Suction

Tube set for suction, disposable, qty. 10 2204867

Tube set for suction, reusable, 20 x 2201722

Vacuum

Tube set for vacuum, disposable, 30-day-use, integrated filter for pump
T0504-01
protection, qty. 10

Bemis container, 3 liter, qty. 36 2200258

Bemis container, 3 liter, qty. 2 2200259

Accessories

5 mm instrument for suction and irrigation, reusable 1200304

Fluid and Insufflation Management I 61

Disposable Anti-Fatigue Mats
Enhance Comfort and Safety

The EcoSuctioner®

■■All-in-one ergonomic suction mat allowing two people

to stand comfortably during a procedure
■■Designed with directional grooves for improved quiet,
continual suction, it attaches to any suction source
■■Comes with a large rugged absorbent mat under-
neath for improved non-slip in the OR
■■Lightweight suction mat, weighing only 0.79 kg, for
quick and easy setup and removal
■■Reduced need for laundry on the floor

Product Description Item Number

The EcoSuctioner®, 71 cm × 101 cm (comfort mat), USA-XG8

91 cm × 142 cm (total) green, qty. 8

The SuctionBlu™ Mat

The SuctionBlu disposable surgical mat combines the-

absorbency of the poly-backed Dri-Safe* pad and the
nonslip, anti-fatigue memory foam construction of
The EcoSuctioner mat with powerful, quiet, continuous
suction capability. These features add up to ensure
a drier, safer, and cleaner operating room.
The graduated slots on The SuctionBlu mat use gravity
to direct fluids towards the suction tube.

The SuctionBlu mat is a smaller, more economical

version of The EcoSuctioner mat, but it is larger than
The Suctioner mat.

Product Description Item Number

The SuctionBlu™ surgical mat, USA-XBL

64 cm × 95 cm (comfort mat), 91 cm × 142 cm (total),
blue, qty. 8

62 I Fluid and Insufflation Management

 The Suctioner®

The disposable surgical mat combines the absorbency It easily attaches to any OR vacuum source in seconds
of the poly-backed Dri-Safe pad and the nonslip, and efficiently manages unwanted fluids, keeping them
anti-fatigue memory foam construction of The Surgical off the OR floor. The anti-microbial properties of The
Mat with powerful, quiet, continuous suction capability. Suctioner can also aid in reducing the risk of cross-
These features add up to ensure a drier, safer, and clea- contamination. The latex-free surgical mat is ideal for all
ner operating room. The Suctioner has graduated slots surgical procedures.
to move fluid towards lateral suction tubes.
Product Description Item Number

The Suctioner®, USA-X10

58 cm × 89 cm (comfort mat), 91 cm × 142 cm (total),
blue, qty. 8

Surgical Mats

The Surgical Mat and The Mini Mat were designed to

address three OR issues: comfort, safety, and fluid
(a) build-up. Both mats are constructed of a resilient
memory foam material which gives the surgeon, nurse,
and surgical technician relief and support when stand-
ing on hard concrete floors and steel step stools. The
mats incorporate a nonslip, molded foam design with
custom, tapered fluid channels. These channels aid in
keeping the surgical team’s feet dry and reduce the risk
of tracking body fluids throughout the OR. The Surgical
and Mini Mats are ideal for all surgical procedures and
are latex-free.

Product Description Item Number

The Surgical Mat™, 51 cm × 99 cm, blue, qty. 10 (a) USA-010

(b) The Mini Mat®, 33 cm × 43 cm, blue, qty. 10 (b) USA-A10

Fluid and Insufflation Management I 63

Safe, Economical, and Efficient Fluid Management

EcoDri-Safe™ Absorbent Rolls

Containing fluids and streamlining clean-up procedures

has never been easier than it is with the new Arthrex
EcoDri-Safe absorbent rolls. The 71 cm × 30 m rolls are
perforated every 51 cm to create 60 easy-to-tear-off
51 cm × 71 cm floor mats on every roll.

EcoDri-Safe mats with a non-slip backing may reduce

slip-and-fall hazards by staying firmly in place through-
out an entire surgical procedure while still absorbing
any fluids that come into contact with the top of the mat.
Any excess fluids can be absorbed with the standard
EcoDri-Safe mats that are provided without the imper-
meable non-slip backing, which allows them to absorb
fluids from both the top and bottom surfaces.

Product Description Item Number

EcoDri-Safe™, non-poly-backed, roll size 71 cm × 30 m, USA-ECO100

sheet size 51 cm × 71 cm, qty. 60 sheets/roll
EcoDri-Safe™, poly-backed, roll size 71 cm × 30 m, USA-ECO100PLY
sheet size 51 cm × 71 cm, qty. 60 sheets/roll
EcoDri-Safe™, dispensing cart USA-ECODISP

Dri-Safe® Absorbent Pads

■■Super absorbent, economical, disposable floor pads

which eliminate expensive laundry costs
■■Use wherever fluids build up, including OR floors, in
front of scrub sinks, lab station floors, etc.
■■Dri-Safe pads help prevent slips and falls, as well as
the transmission of harmful contaminants to health-
care providers
■■Impermeable poly backing option promotes safety
and keeps the pads firmly in place.
Fluids are locked in

Product Description Item Number

Dri-Safe® absorbent pad, 71 cm × 102 cm, USA-B28X40

blue, qty. 20
Dri-Safe® absorbent pad, 71 cm × 102 cm, USA-B28X40PLY
blue, poly backing, qty. 20
Dri-Safe® absorbent pad, 76 cm × 142 cm, USA-B30X56
blue, qty. 15
Dri-Safe® absorbent pad, 76 cm × 142 cm, USA-B30X56PLY
blue, poly backing, qty. 15

64 I Fluid and Insufflation Management

 Fluid Diamond

■■Fast, effective fluid collection

■■Powerful suction keeps floors dry and reduces the

potential for slipping or falling
■■Eliminates the need for slippery, costly towels and
blankets on the OR floor to absorb fluids
■■Designed with quieting pad and anti-floor-sticking
technology
■■Attaches to any surgical suction source

■■Includes suction tubing for easy attachment to any

suction source

Product Description Item Number

Fluid Diamond, qty. 30 USA-FDX

ArthroVac™

(c)

(b)

(a)

The ArthroVac is an active suction device used to clean Product Description Item Number
up unwanted fluid inside the OR. Attaching the ArthroVac™ floor suction system (a) AR-4004
ArthroVac to an OR vacuum allows the device to quickly ArthroVac™ telescoping handle and connector (b) AR-4004H
and quietly suck up fluid into a waste container. ArthroVac™ felt pads, qty. 10 (c) AR-4004P

Fluid and Insufflation Management I 65

Arthroscopic RF System
Performance and Consistency

SynergyRF Bipolar Ablation System........................................................................... 68

SynergyRF Console................................................................................................... 68

SynergyRF Footswitch............................................................................................. 69

Uni-Cart...................................................................................................................... 69

ApolloRF MP90 Probe and ApolloRF XL90......................................................... 70

ApolloRF Hook Probe............................................................................................... 70

ApolloRF MP50 Probe............................................................................................... 71

ApolloRF H50 Probe.................................................................................................. 71

CoolCut™ Monopolar RF Electrodes ........................................................................ 72

CoolCut™ Ablation Wands..................................................................................... 72

Small Joint CoolCut™ Ablation Wands............................................................... 73

Accessory Devices.................................................................................................. 73

Arthroscopic RF System I 67
SynergyRF Bipolar Ablation System

The SynergyRF generator is an advanced electrosurgical With the ApolloRF ablation electrodes, Arthrex offers a
generator designed to meet the needs of arthroscopic complete bipolar RF system for the resection, ablation,
surgical procedures. The generator has an advanced and coagulation of soft tissue and hemostasis of blood
output control algorithm using feedback systems that vessels in arthroscopic and orthopedic procedures.
are capable of adjusting the output as the tissue char-
acteristics change. This will result in a more consistent The system features auto-detection technology for
clinical effect at the surgical site. The SynergyRF console the electrodes currently in use. An implemented metal
provides an interface to the Synergy video management proximity detection function suspends power when in
system for a heads-up display feature so settings are close proximity to the scope and metal instruments. The
displayed on the main surgical monitor. ergonomic handle of the ApolloRF electrodes features
three buttons to operate the ablate and coagulation
functions as well as adjust the power setting.

SynergyRF Console

■■Integrates with the Synergy imaging system or ■■User-friendly LCD touchscreen

operates as a stand-alone unit
■■Easy-to-adjust ablation and coagulation settings
■■Probe recognition function identifies probe currently
in use
Product Description Item Number
■■Metal proximity detection function suspends power SynergyRF console AR-9800
when in close proximity to the scope and metal instru-
ments

68 I Arthroscopic RF System
SynergyRF Footswitch

■■Separate ablation and COAG pedals

■■Central ablation level adjustment button

■■Integrated carrying handle

Product Description Item Number

Synergy footswitch
RF
AR-9800-F

Uni-Cart

Product Description Item Number

Uni-cart KU.5849.903

Arthroscopic RF System I 69
 ApolloRF MP90 Probe and ApolloRF XL90

■■90-degree tip configured to access and ablate tissue ■■Apollo XL90 probe has a 25 % longer electrode than
rapidly Apollo MP90 to remove more tissue per pass
■■Durable 1-piece active electrode
Product Description Item Number
■■Easy-to-use, ergonomic hand controls Apollo MP90 probe
RF
AR-9811

■■Multiple ports for efficient bubble removal ApolloRF XL90 probe AR-9821

ApolloRF Hook Probe

■■Generous hook size for easy tissue capture and rapid ■■Configured to access and reach tissue in various
tissue resection and coagulation arthroscopic procedures
■■Durable 1-piece active electrode
Product Description Item Number
■■Easy-to-use ergonomic hand controls Apollo hook probe
RF
AR-9825

70 I Arthroscopic RF System
 ApolloRF MP50 Probe

■■Smooth radius at tip designed to access confined ■■Lower ablation default setting of 4 for use around
anatomy sensitive tissue
■■360° edge control for precise ablation ■■For use in knee and shoulder procedures

■■Dual aspiration slots for effective suction

Product Description Item Number

ApolloRF MP50 probe AR-9815

ApolloRF H50 Probe

■■185 mm working length provides an extended reach ■■Dual aspiration slots for effective suction
into the hip joint
Product Description Item Number
■■Reinforced shaft and handle junction maintains device
Apollo H50 probe
RF
AR-9835
integrity during hip arthroscopy
■■360° edge control for precise ablation

■■Flat electrode face for smooth contouring of tissues

■■Optimal tip geometry for enhanced access to

hip anatomy

Arthroscopic RF System I 71
CoolCut™ Monopolar RF Electrodes

The pioneering design of the CoolCut electrode tips The line of CoolCut radio frequency devices features an
makes it possible to operate the CoolCut series at innovative ergonomic handle with hand controls.
extremely low power settings, thereby increasing
patient safety without sacrificing performance. The The 90° versions have a unique shape that allows for
reduction of the power requirements also allows for the maximum extension from the tip of the electrode to
absence of a ceramic ring surrounding the electrode the shaft of the device, while still fitting through a 5 mm
face, reducing the size of the tip which aids in reaching cannula. The new CoolCut shaft coating facilitates easy
target tissue in anatomically tight spaces. insertion through both working cannulas and subcuta-
neous tissue.

CoolCut™ Ablation Wands

Aspirating Ablation Probes Non-Aspirating Ablation Probes

Product Description Item Number Product Description Item Number

CoolCut™ 90 CoolCut™ 90NA

AR-9803A-90 AR-9803-90
90°, Ø 2.92 mm tip 90°, Ø 2.92 mm tip

CoolCut™ 50 CoolCut™ 50NA

AR-9803A-50 AR-9803-50
50°, Ø 2.92 mm tip 50°, Ø 2.92 mm tip

CoolCut™ 30 CoolCut™ 30NA

AR-9803A-30 AR-9803-30
30°, Ø 2.92 mm tip 30°, Ø 2.92 mm tip

Toothbrush Toothbrush 90NA

90°, AR-9705A-90 90°, AR-9705-90
4.04 mm × 1.83 mm tip 4.04 mm × 1.83 mm tip

Meniscal Probes Ball Probes

Product Description Item Number Product Description Item Number

CoolCut™
CoolCut™ ball
meniscectomy 45 AR-9802M-45 AR-9808
0°, Ø 1.12 mm tip
90°, 0.81 mm tip

CoolCut™
CoolCut™ ball 45
meniscectomy 90 AR-9802M-90 AR-9808-45
45°, Ø 1.12 mm tip
90°, 0.81 mm tip

Hook Tip Probes

Product Description Item Number

CoolCut™ hook
AR-9801
90°, 1.63 mm tip

72 I Arthroscopic RF System
Small Joint CoolCut™ Ablation Wands

Product Description Item Number

CoolCut™
small joint ball AR-9808SJ
0°, Ø 0.79 mm tip

CoolCut™
small joint ball 45 AR-9808SJ-45
45°, Ø 0.79 mm tip

CoolCut™
small joint 45 AR-9809SJ-45
45°, 0.81 mm tip

CoolCut™
small joint 90 AR-9809SJ-90
90°, 0.81 mm tip

Accessory Devices

Product Description Item Number

Arthrex pencil kit AR-9610

Arthroscopic RF System I 73
 DrillSaw Power™
The New Power in Orthopedics

DrillSaw Portfolio............................................................................................................ 76

Field of Application................................................................................................. 77

DrillSaw Highspeed 200™............................................................................................ 78

Features...................................................................................................................... 78

Instruments and Accessories From Arthrex.................................................... 78

Accessories............................................................................................................... 79

Working in All Directions....................................................................................... 79

Attachments.............................................................................................................. 80

DrillSaw Mini 300™.......................................................................................................... 82

Features...................................................................................................................... 82

Accessories............................................................................................................... 83

Attachments.............................................................................................................. 84

DrillSaw Sports 400™..................................................................................................... 86

Features...................................................................................................................... 86

Accessories............................................................................................................... 87

Attachments.............................................................................................................. 88

DrillSaw Max 600™......................................................................................................... 90

Features...................................................................................................................... 90

Accessories................................................................................................................ 91

Attachments.............................................................................................................. 92

Blades and Burrs............................................................................................................. 94

Sagittal Blades | Mainly used for AR-300SAG, AR-400SAG, and AR-600SAGS............................. 94

Sagittal SpeedCut™ Blades | Mainly used for AR-600SAGMIS......................................... 95

Sagittal SpeedCut™ Blades | Mainly used for AR-600SAG.............................................. 96

Reciprocating Blades | Mainly used for AR-300SR and AR-600SR....................................... 97

Burrs | Mainly used for AR-300B-2.......................................................................................... 98

Saw Blades for AR-600SAGMIS DrillSaw Power™......................................... 99

Rasps......................................................................................................................... 100

DrillSaw Power I 75
DrillSaw Portfolio

DrillSaw Max 600™

DrillSaw Sports 400™

DrillSaw Mini 300™

DrillSaw Highspeed 200™

76 I DrillSaw Power
Field of Application

Trauma Trauma
Prothetics Heavy Duty Light Duty Foot Hand

DrillSaw Max 600™

DrillSaw Sports 400™

DrillSaw Mini 300™

DrillSaw Highspeed 200™

Optimal

Possible

DrillSaw Power I 77
DrillSaw Highspeed 200™
Logical Integration of Ease of Use

Features

■■Automatic detection of motor

■■A small, lightweight motor operating at speeds

up to 40 000 rpm
■■Perfect system for percutaneous surgery

■■AR-200M-ISO can be used with all instruments that

have an ISO connection
■■AR-200M can be used with all DrillSaw Mini 300
attachments
■■Motor with cable and motor holder are sterilizable Product Description Item Number
(135 °C)
Console (AR-200C), motor with cable (AR-200M), AR-200
spray clip (AR-200SP), footswitch (S-N1),
irrigation tubing set, stand, motor support, power cord

Instruments and Accessories From Arthrex

(c)

(a)

(d)

Arthrex offers you a comprehensive range of

surgical attachments as well as special saw handpieces
for microsurgery. All handpieces are
(b) thermowasher-disinfectable and -sterilizable.

Product Description Item Number

Motor with cable, with AR-300 coupling motor (a) AR-200M

Motor with cable, for ISO saw attachment (b) AR-200M-ISO
AR-200 – Clips (5 pcs) OEM06290600
Spray clip (c) AR-200SP
AR-200 – Irrigation tubing set (6 pcs) OEM04364106
Handle for AR-200M (d) AR-200H

78 I DrillSaw Power
 Accessories

Product Description Item Number

AR-200 – Sterilization Cassette (e)

With suitable compartments for handpieces and motor (e)
OEM04013500
and for gentle sterilization of the connected motor
cable

Uni-cart (f) KU.5849.903 (f)

Working in All Directions

Our saw handpieces S-8 R, S-8 S, and S-8 O can be completely dismantled. The 3 models offer a perfect durable
solution for corrective osteotomies or bone removal with sagittal, oscillating, or reciprocal movement.
Whichever direction you choose: With Arthrex, you will have a reliable partner at your side.

Product Description Item Number

AR-200 – ISO SAW S-8R reciprocating 10100801

AR-200 – ISO SAW S-8S sagittal 10100803

AR-200 – ISO SAW S-8O oscillating 10100802

AR-200 – Saw blades for ISO SAW R-30, length 30 mm, width 4.2 mm, thickness 0.4 mm OEM04725700
AR-200 – Saw blades for ISO SAW R-20, length 20 mm, width 4.2 mm, thickness 0.4 mm OEM04725900
AR-200 – Saw blades for ISO SAW R-15, length 15 mm, width 4.2 mm, thickness 0.4 mm OEM04726000

AR-200 – Saw blades for ISO SAW S-10, length 15 mm, width 10 mm, thickness 0.3 mm OEM04726100
AR-200 – Saw blades for ISO SAW S-6, length 15 mm, width 6 mm, thickness 0.3 mm OEM04726200

AR-200 – Saw blades for ISO SAW O-15, length 15 mm, width 10.2 mm, thickness 0.3 mm OEM04800400
AR-200 – Saw blades for ISO SAW O-8, length 8 mm, width 6.2 mm, thickness 0.3 mm OEM04800500

DrillSaw Power I 79
 Attachments

Description Item Number Connection RPM Power Note

Saw blade connection

Sagittal saw adapter AR-300SAG Arthrex (AR-300) 15 000 Arthrex AR-300

AR-300 flat shaft or

Reciprocating saw
AR-300SR Round and flat shaft 15 000 standard round shaft
adapter
Ø 3.17 mm connection

Round shaft
connection:
Burr adapter Ø 2.35 mm AR-300B Round shaft 2.35 mm 15 000
Ø 2.35 mm
(dental connection)

Standard AO
Drill adapter AO AR-300DAO-2 Standard AO 1 300 ++ connection drills up to
Ø 6 mm

Keyed and keyless

Drill hybrid chuck AR-300DJH 0 - 5 mm 1 300 ++
chuck drill up to 6 mm

Drill keyed, keyed

AR-300DJ 0 - 4 mm 1 300 ++ Drills up to Ø 6 mm
Jacobs chuck

Round shaft
connection:
Drill adapter AR-300B-2 Round shaft 2.35 mm 2 750
Ø 2.35 mm
(dental connection)

Burr shank up to
Drill keyless chuck AR-300DK30 0 - 3 mm 2 750 3 mm
Drills up to 4 mm

Burr shank up to
Drill keyless chuck AR-300DK45 2 - 4.5 mm 2 750 4.5 mm
Drills up to 4 mm

Green = drill (1 300 rpm), blue = drill (2 750 rpm)

80 I DrillSaw Power
 Attachments

Description Item Number Connection RPM Power Note

Standard AO
connection drills up to
Reamer adapter AO AR-300RAO Standard AO 500 +++
Ø 8 mm, reamer up to
Ø 20 mm

Burr shank up to
Ø 4 mm
Reamer keyed chuck AR-300RJ 0 - 4 mm 500 +++ drills up to Ø 8 mm
reamer up to
Ø 20 mm

Recommended
Pin driver adapter AR-300WD16 0.6 - 1.6 mm 2 750 application:
pins 0.6 - 1.6 mm

Recommended
Pin driver adapter AR-300PD24 1.2 - 2.4 mm 1 300 application:
pins 1.2 - 2.4 mm

Offset adapter for all

Offset adapter AR-200CA Arthrex AR-300 15 000
attachments

Red = reaming (500 rpm)

DrillSaw Power I 81
DrillSaw Mini 300™
The New Battery-Powered Tool for Hand, Foot, and Small Bone Surgery

Features

■■Modular design is cost-efficient Product Description Item Number

■■Minimal weight and maximum power Handpiece AR-300 (a) AR-300

Lithium-ion battery housing for AR-300 (b) AR-300L
■■Excellent balance and ergonomics Aseptic transfer kit for AR-300 (c) AR-300ATK
■■Lubrication not needed Battery housing for AR-300 (d) AR-300LBH
Elongation handle for AR-300 (e) AR-300H
■■PEEK-housing – durable and lightweight

■■Lithium-ion technology – very long battery life

■■Intuitive handling

■■1-year warranty on batteries

(b)

(a)

(c)

(d)

(e)

82 I DrillSaw Power
Accessories

Product Description Item Number

Universal battery charger for AR-400, AR-300, and

AR-600 batteries
AR-400UBC
Note: The charger will be delivered without
charging bays

Universal battery charger – charging bays for

AR-300/600 batteries
AR-400UBC-3
Note: For battery type: AR-300L and AR-600L;
2 charging bays will be delivered at a time

Universal battery charger – charging bays for

AR-400 batteries
AR-400UBC-4
Note: For battery type: AR-400UB;
2 charging bays will be delivered at a time

DrillSaw Mini 300™ instrument case AR-300C-G

DrillSaw Mini 300™ sterilization tray AR-300C

DrillSaw Power I 83
 Attachments

Description Item Number Connection RPM Power Note

Saw blade connection

Sagittal saw adapter AR-300SAG Arthrex (AR-300) 15 000 Arthrex AR-300

AR-300 flat shaft or

Reciprocating saw
AR-300SR Round and flat shaft 15 000 standard round shaft
adapter
Ø 3.17 mm connection

Round shaft
connection:
Burr adapter Ø 2.35 mm AR-300B Round shaft 2.35 mm 15 000
Ø 2.35 mm
(dental connection)

Standard AO
Drill adapter AO AR-300DAO-2 Standard AO 1 300 ++ connection drills up to
Ø 6 mm

Keyed and keyless

Drill hybrid chuck AR-300DJH 0 - 5 mm 1 300 ++
chuck drill up to 6 mm

Drill keyed, keyed

AR-300DJ 0 - 4 mm 1 300 ++ Drills up to Ø 6 mm
Jacobs chuck

Round shaft
connection:
Drill adapter AR-300B-2 Round shaft 2.35 mm 2 750
Ø 2.35 mm
(dental connection)

Burr shank up to
Drill keyless chuck AR-300DK30 0 - 3 mm 2 750 3 mm
Drills up to 4 mm

Burr shank up to
Drill keyless chuck AR-300DK45 2 - 4.5 mm 2 750 4.5 mm
Drills up to 4 mm

Green = drill (1 300 rpm), blue = drill (2 750 rpm)

84 I DrillSaw Power
 Attachments

Description Item Number Connection RPM Power Note

Standard AO
connection drills up to
Reamer adapter AO AR-300RAO Standard AO 500 +++
Ø 8 mm, reamer up to
Ø 20 mm

Burr shank up to
Ø 4 mm
Reamer keyed chuck AR-300RJ 0 - 4 mm 500 +++ drills up to Ø 8 mm
reamer up to
Ø 20 mm

Recommended
Pin driver adapter AR-300WD16 0.6 - 1.6 mm 2 750 application:
pins 0.6 - 1.6 mm

Recommended
Pin driver adapter AR-300PD24 1.2 - 2.4 mm 1 300 application:
pins 1.2 - 2.4 mm

Offset adapter for all

Offset adapter AR-300CA Arthrex AR-300 15 000
attachments

Red = reaming (500 rpm)

DrillSaw Power I 85
DrillSaw Sports 400™
Your First Choice for Sports Med, Ortho, and Trauma

Features

■■Modular handpiece for drilling, reaming and sawing Product Description Item Number

• Dual trigger operation Handpiece AR-400 (a) AR-400

Lithium-ion battery housing for AR-400 (b) AR-400UBH
• Multifunctional Aseptic transfer kit for AR-400 (c) AR-400ATK
• Forward Battery pack, non-sterile, for AR-400 (d) AR-400UB

• Reverse
• Oscillate drilling
• Lockout reverse
■■Custom texture improves grip during use

■■Versatile for trauma and sports medicine

■■Lithium-ion battery technology

■■Lightweight, powerful, and perfectly balanced

(a)

(b)

(c)

(d)

86 I DrillSaw Power
Accessories

Product Description Item Number

Universal battery charger for AR-400, AR-300, and

AR-600 batteries (a)
AR-400UBC
Note: The charger will be delivered without charging
bays

Universal battery charger – charging bays for

AR-300/600 batteries
AR-400UBC-3
Note: For battery type: AR-300L and AR-600L;
2 charging bays will be delivered at a time

Universal battery charger – charging bays for

AR-400 batteries
AR-400UBC-4
Note: For battery type: AR-400UB;
2 charging bays will be delivered at a time

DrillSaw Sports 400™ instrument case AR-400WMC

DrillSaw Power I 87
 Attachments

Description Item Number Connection RPM Note

Saw attachment – Saw blade connection

AR-400SAG 23 000
sagittal AR-300

Drill attachment – Standard AO

AR-400DAO Standard AO 1 330
AO style connection

Drill keyless chuck Burr shank up to

AR-400DK74 0 - 7.4 mm 1 330
0.6 - 7.4 mm Ø 7.4 mm

Drill Jacobs chuck Burr shank up to

AR-400DJ40 0 - 4 mm 1 330
0 - 4 mm Ø 4 mm

Drill Jacobs chuck Burr shank up to

AR-400DJ74 0 - 7.4 mm 1 330
0 - 7.4 mm Ø 7.4 mm

Drill Jacobs chuck hybrid Burr shank up to

AR-400DJH50 0 - 5 mm 1 330
0 - 5 mm Ø 5 mm

Drill Jacobs chuck hybrid Burr shank up to

AR-400DJH74 0 - 7.4 mm 1 330
0 - 7.4 mm Ø 7.4 mm

Zimmer and Drill attachments:

Drill Zimmer / Hudson AR-400DZH 1 330
Hudson Zimmer and Hudson

Drill attachment – Standard AO and

AR-400DT Trinkle 1 330
Trinkle Trinkle connection

Drill attachments:
Drill attachment – Harris AR-400DHA Harris 1 330
Harris

88 I DrillSaw Power
 Attachments

Description Item Number Connection RPM Note

Adapter for
Adapter for radiolucent radiolucent
AR-400ARL 1 330
angular drive angular drive from
Synthes

Recommended
Pin driver attachment
AR-400PD 0 - 3.2 mm 1 330 application:
0 - 3.2 mm
0.6 - 3.2 mm

Reamer attachment – Zimmer and Reamer attachments:

AR-400RZH 330
Zimmer / Hudson style Hudson Zimmer and Hudson

Reamer attachment – Standard AO Reamer attachments:

AR-400RAOP 330
AO Protek style Protek standard AO Protek

Reamer attachment – Reamer attachments:

AR-400RHU Hudson 330
Hudson style Hudson

Reamer Jacobs chuck Burr shank up to

AR-400RJ74 0 - 7.4 mm 330
0 - 7.4 mm Ø 7.4 mm

Reamer Jacobs chuck Burr shank up to

AR-400RJH74 0 - 7.4 mm 330
hybrid 0 - 7.4 mm Ø 7.4 mm

Attachment – dynamic
AR-400DHS DHS 330 Attachments: DHS
hip screw

Round shaft
Burr attachment
AR-400B 21 300 connection:
2.35 mm
Ø 2.35 mm

Round shaft
J-latch and dental
AR-400JLD 5 300 connection:
2.35 mm
Ø 2.35 mm

Blue = drill (1 300 rpm), red = reaming (330 rpm)

DrillSaw Power I 89
DrillSaw Max 600™
The New Modular Battery-Powered Tool for Traumatology and Orthopedics

Features

■■Modular design is cost-efficient Product Description Item Number

■■Minimal weight and maximum power Handpiece AR-600 (a) AR-600

Lithium-ion battery housing for AR-600 (b) AR-600LBH
■■Original pistol handle for excellent balance Aseptic transfer kit for AR-600 (c) AR-600ATK
■■Lubrication not needed Battery pack, lithium-ion for AR-600 (d) AR-600L

■■PEEK housing – durable and lightweight

■■Lithium-ion technology – very long battery life

■■Intuitive handling

■■1-year warranty on batteries

(a)

(b)

(c)

(d)

90 I DrillSaw Power
Accessories

Product Description Item Number

Universal battery charger for AR-400, AR-300, and

AR-600 batteries
AR-400UBC
Note: The charger will be delivered without charging
bays

Universal battery charger – charging bays for

AR-300/600 batteries
AR-400UBC-3
Note: For battery type: AR-300L and AR-600L;
2 charging bays will be delivered at a time

Universal battery charger – charging bays for

AR-400 batteries
AR-400UBC-4
Note: For battery type: AR-400UB;
2 charging bays will be delivered at a time

DrillSaw Max 600™ instrument case AR-600C-G

DrillSaw Max 600™ sterilization tray to apply V-600T AR-600GC

DrillSaw Max 600™ steribox AR-600C

DrillSaw Power I 91
 Attachments

Description Item Number Connection RPM Note

Arthrex Saw blade connection

Saw attachment sagittal AR-600SAG 13 000
(AR-600) Arthrex AR-600

Saw blade connection

Arthrex
Saw attachment sagittal AR-600SAGMIS 13 000 Arthrex
(AR-600SAGMIS)
AR-600SAGMIS

Saw attachment sagittal Arthrex Saw blade connection

AR-600SAGS 13 000
for AR-300 blades (AR-300) Arthrex AR-300

Saw attachment Saw blade connection

AR-600SR Zimmer 13 000
reciprocating Zimmer

Standard AO
Drill attachment style AO AR-600DAO Standard AO 950 connection
drills up to Ø 12 mm

Burr shank up to Ø
Drill keyless chuck AR-600DK 0 - 7.4 mm 950 7.4 mm
Drills up to Ø 12 mm

Standard AO and
Drill attachment style Standard AO
AR-600DAOT 950 Trinkle connection
AO / Trinkle and Trinkle
drills up to Ø 12 mm

Drill attachment style Zimmer and Drill attachments:

AR-600DZH 950
Zimmer / Hudson Hudson Zimmer and Hudson

Drill attachment Standard Drill attachments:

AR-600DAOP 950
style AO Protek AO Protek Standard AO Protek

Burr shank up
Drill Jacobs chuck AR-600DJ 0 - 7.4 mm 950 to Ø 7.4 mm
Drills up to Ø 12 mm

Drill attachments:
Drill attachment AR-600DHU Hudson 950
Hudson style

Burr shank up
Drill Jacobs chuck hybrid AR-600DJH 0 - 7.4 mm 950 to Ø 7.4 mm
drills up to Ø 12 mm

Blue = drill (950 rpm)

92 I DrillSaw Power
 Attachments

Description Item Number Connection RPM Note

Reamer attachment style Reamer attachments: Zimmer and

AR-600RZH 200
Zimmer / Hudson Hudson

Reamer attachment style Reamer attachments: standard AO

AR-600RAOP 200
AO Protek Protek

Reamer attachment AR-600RHU 200 Reamer attachments: Hudson style

Burr shank up to Ø 7.4 mm

Reamer Jacobs chuck AR-600RJ 0 - 7.4 mm 250
current acetabulum reamer

Burr shank up to Ø 7.4 mm

Reamer keyless chuck AR-600RK 0 - 7.4 mm 250
current acetabulum reamer

Recommended application:
Wire driver attachment AR-600WD-2 0.6 - 1.6 mm
950 0.6 - 1.6 mm
Pin driver attachment AR-600PD-2 1.6 - 4 mm
1.6 - 4 mm

Pin driver attachment AR-600PD-3 0.8 - 4 mm 950 0.8 - 4 mm

Adapter for radiolucent Adapter for radiolucent

AR-600ARL Arthrex 950
angular drive angular drive from Synthes

Adapter Harris 60102 Standard AO Protek n/a Adapter for Harris connection

Adapter Trinkle 60106 Standard AO Protek n/a Adapter for Trinkle connection

Sternum adapter AR-600SRS Arthrex 13 000 Saw blade connection Arthrex

Drill attachment AR-600DHS 250 Attachments: DHS style

Red = reaming (200/250 rpm)

DrillSaw Power I 93
Blades and Burrs
For DrillSaw Power™

30

Sagittal Blades | Mainly used for AR-300SAG, AR-400SAG, and AR-600SAGS

30

20

10

mm
(a)

30

20

10
(b)

mm
Product Description Item Number

20

10
(c)

mm
Length 40 mm, width 14 mm, thickness 0.6 mm (a) AR-300-040S
Length 40 mm, width 9.5 mm, thickness 0.6 mm (b) AR-300-041S
Length 25 mm, width 9.4 mm, thickness 0.7 mm (c) AR-300-042S
Length 25 mm, width 9.4 mm, thickness 0.6 mm (d) AR-300-043S
Length 25 mm, width 5.5 mm, thickness 0.6 mm (e) AR-300-044S 20

10

mm
Length 16 mm, width 5.5 mm, thickness 0.6 mm (f) AR-300-045S (d)

Length 17 mm, width 9.4 mm, thickness 0.65 mm, AR-300-406S

with stop (g)
Length 19 mm, width 10 mm, AR-300-450S
thickness 0.55 mm (Latarjet) (h)
(e)

(f)
10

(g)
7
6

(h)

©2010, Arthrex Inc. All rights reserved.

94 I DrillSaw Power
LR0610 Vers. A
Sagittal SpeedCut™ Blades | Mainly used for AR-600SAGMIS

Product Description Item Number

Thickness 1 mm, length 90 mm, width 13 mm (i) AR-600-300S

Thickness 1.19 mm, length 90 mm, width 13 mm AR-600-307S
Thickness 1.27 mm, length 90 mm, width 13 mm AR-600-301S
Thickness 1.37 mm, length 90 mm, width 13 mm AR-600-313S
Thickness 1 mm, length 90 mm, width 19 mm (j) AR-600-310S
Thickness 1.27 mm, length 90 mm, width 19 mm AR-600-302S
Thickness 1.37 mm, length 90 mm, width 19 mm AR-600-311S
Thickness 1 mm, length 90 mm, width 25.4 mm (k) AR-600-303S
Thickness 1.19 mm, length 90 mm, width 25.4 mm AR-600-304S
Thickness 1.27 mm, length 90 mm, width 25.4 mm AR-600-305S
Thickness 1.47 mm, length 90 mm, width 25.4 mm AR-600-306S
Thickness 0.6 mm, length 45 mm, width 9 mm (l) AR-600-353S
Thickness 1.27 mm, length 105 mm, width 19 mm (m) AR-600-312S
Thickness 0.8 mm, length 65 mm, width 27 mm (n) AR-600-351S
Thickness 0.8 mm, length 65 mm, width 18 mm (o) AR-600-352S
Thickness 0.8 mm, length 65 mm, width 46 mm (p) AR-600-350S

(i) (j) (k) (l) (m) (n) (o) (p)

DrillSaw Power I 95
 Sagittal SpeedCut™ Blades | Mainly used for AR-600SAG

Product Description Item Number

Thickness 1 mm, length 90 mm, width 13 mm (a) AR-600-000S

Thickness 1.19 mm, length 90 mm, width 13 mm AR-600-007S
Thickness 1.27 mm, length 90 mm, width 13 mm AR-600-001S
Thickness 1.37 mm, length 90 mm, width 13 mm AR-600-013S
Thickness 1 mm, length 90 mm, width 19 mm (b) AR-600-010S
Thickness 1.27 mm, length 90 mm, width 19 mm AR-600-002S
Thickness 1.37 mm, length 90 mm, width 19 mm AR-600-011S
Thickness 1 mm, length 90 mm, width 25.4 mm (c) AR-600-003S
Thickness 1.19 mm, length 90 mm, width 25.4 mm AR-600-004S
Thickness 1.27 mm, length 90 mm, width 25.4 mm AR-600-005S
Thickness 1.47 mm, length 90 mm, width 25.4 mm AR-600-006S
Thickness 0.6 mm, length 45 mm, width 9 mm (d) AR-600-053S
Thickness 1.27 mm, length 105 mm, width 19 mm (e) AR-600-012S
Thickness 0.8 mm, length 65 mm, width 27 mm (f) AR-600-051S
Thickness 1.2 mm, length 65 mm, width 27 mm AR-600-060S
Thickness 0.8 mm, length 65 mm, width 18 mm (g) AR-600-052S
Thickness 0.8 mm, length 65 mm, width 46 mm (h) AR-600-050S
System

10

20

10

30

40

30
50

40
60

(a) (b) (c) (d) (e) (f) (g) (h)

96 I DrillSaw Power
Reciprocating Blades | Mainly used for AR-300SR and AR-600SR

Product Description Item Number

Length 15 mm, width 6 mm, thickness 0.6 mm (i) AR-300-050S

Length 25 mm, width 6 mm, thickness 0.6 mm (j) AR-300-051S
Length 40 mm, width 6 mm, thickness 0.6 mm (k) AR-300-052S
Length 88 mm, width 13.4 mm, thickness 1.1 mm (l) AR-600-020S
Length 52.8 mm, width 10 mm, thickness 1.1 mm (m) AR-600-021S
Length 73.5 mm, width 13.5 mm, thickness 1 mm (n) AR-600-022S
Length 32.8 mm, width 9.5 mm, thickness 1.1 mm (o)* AR-600-250S
Length 67 mm, width 9.5 mm, thickness 1.1 mm (p) AR-600-025S
Length 73.5 mm, width 12.7 mm, thickness 1.27 mm AR-600-026S

*for Oxford Knee (for cement version only)

©2010, Arthrex Inc. All rights reserved.

LR0610 Vers. A

(i) (j) (k) (l) (m) (n) (o) (p)

DrillSaw Power I 97
 Burrs | Mainly used for AR-300B-2

(a)

(b)

(c)

(d)

Product Description Item Number

(e)
Burr, straight, 13 mm, Ø 2 mm, Shannon Recta 2 (a) AR-300-B001
Burr, straight, 8 mm, Ø 2 mm, Shannon Corta (b) AR-300-B002
Burr, straight, 12 mm, Ø 2.2 mm, Shannon Larga (c) AR-300-B003
(f)
Burr, conical, 12 mm, Ø 2.2 mm, Shannon 43 (d) AR-300-B004
Burr, conical, 13 mm, Ø 2.9 mm, Wedge 4 (e) AR-300-B101
Burr, straight, 13 mm, Ø 2.9 mm, Wedge 3 (f) AR-300-B102
(g)
Burr, oval, 15 mm, Ø 5 mm, Brophy (g) AR-300-B103
Burr, straight, 19.5 mm, Ø 2 mm, AR-300-B201
Shannon Recta 2 long (h)
(h)
Burr, straight, 20 mm, Ø 3.1 mm, Shannon (i) AR-300-B202

(i)

Company Knee System Cutting Thickness Item Number

Biomet AGC, Vanguard, Performance 1.37 AR-600-011S, AR-600-311S

Biomet Oxford Uni 1.37 AR-600-011S, AR-600-020S, AR-600-250S, AR-600-311S
Depuy S-ROM 0.9 AR-600-003S, AR-600-010S, AR-600-303S, AR-600-310S
Depuy LCS and Complete 1.47 AR-600-306S
Depuy PFC Sigma 1.19 AR-600-304S
Depuy Preservation Uni 1.27 AR-600-301S
Exactech Optetrak 1.27 AR-600-305S, AR-600-302S
S&N Genesis 1.27 AR-600-305S, AR-600-302S
S&N Journey 1.37 AR-600-011S
Stryker Triathlon, Scorpio 1.27 AR-600-005S, AR-600-002S
Stryker Triathlon PKR 1.27 AR-600-001S, AR-600-002S
Wright Medical Advance 1.27 AR-600-005S, AR-600-002S
Wright Medical Evolution 1.27 AR-600-001S
Wright Medical Evolution Uni 0.9 AR-600-000S, AR-600-010S
Zimmer NexGen, Legacy 1.27 AR-600-005S, AR-600-002S
Zimmer MG I and IB II 0.9 AR-600-003S, AR-600-010S
Zimmer NexGen Uni, Natural Uni 1.27 AR-600-001S, AR-600-002S
Zimmer Natural Series 1.27 and 0.9 AR-600-005S, AR-600-002S, AR-600-005S, AR-600-010S

Note: This chart is a recommendation only. Surgeon preference may override the suggested blade.
The initial part number listed is the primary use blade followed by the alternatives.

98 I DrillSaw Power
Saw Blades for AR-600SAGMIS DrillSaw Power™

Product Description Item Number

Length 90 mm, width 13 mm, thickness 0.89 mm (j) AR-601-13089-090S

Length 90 mm, width 13 mm, thickness 1.19 mm (k) AR-601-13119-090S
Length 70 mm, width 13 mm to 8 mm, AR-601-13127-070S
thickness 1.27 mm (l)
Length 90 mm, width 13 mm, thickness 1.27 mm (m) AR-601-13127-090S
Length 70 mm, width 13 mm to 8 mm, AR-601-13137-070S
thickness 1.37 mm (n)
Length 75 mm, width 13 mm, thickness 1.37 mm (o) AR-601-13137-075S
Length 75 mm, width 19 mm, thickness 0.89 mm (p) AR-601-19089-075S
Length 90 mm, width 19 mm, thickness 1.19 mm (q) AR-601-19119-090S
Length 75 mm, width 19 mm, thickness 1.27 mm (r) AR-601-19127-075S
Length 90 mm, width 19 mm, thickness 1.27 mm (s) AR-601-19127-090S
Length 90 mm, width 25 mm to 19 mm, AR-601-25127-090S
thickness 1.27 mm (t)
Length 90 mm, width 25 mm to 19 mm, AR-601-25147-090S
thickness 1.47 mm (u)

(j) (k) (l) (m) (n) (o) (p) (q) (r) (s) (t) (u)

DrillSaw Power I 99
 Rasps

Product Description Item Number

Rasp, serrated, small, 11 mm × 5.5 mm (a) AR-300-053S

Rasp, serrated, small, 13 mm × 7 mm (b) AR-300-054S
Rasp, cross-cut, small, 11 mm × 5.5 mm (c) AR-300-055S
Rasp, cross-cut, small, 13 mm × 7 mm (d) AR-300-056S
(a)

(b)

(c)

(d)

100 I DrillSaw Power

 View U.S. Patent information at
www.arthrex.com/corporate/virtual-patent-marking

www.arthrex.com
© Arthrex GmbH, 2019. All rights reserved. LB2-0690-EN_K